-
An implicit level set algorithm for hydraulic fracturing with a stress-layer asymptote
Authors:
A. V. Valov,
E. V. Dontsov,
A. N. Baykin,
S. V. Golovin
Abstract:
The capability to simulate a hydraulic fracturing process is an essential tool that can be used to optimize treatment design and increase the efficiency of field operations. In most practical cases, hydraulic fractures propagate in a multi-layered rock formation. As a result, there is a need to incorporate the effect of such heterogeneities in fracturing models to achieve an accurate prediction. T…
▽ More
The capability to simulate a hydraulic fracturing process is an essential tool that can be used to optimize treatment design and increase the efficiency of field operations. In most practical cases, hydraulic fractures propagate in a multi-layered rock formation. As a result, there is a need to incorporate the effect of such heterogeneities in fracturing models to achieve an accurate prediction. To capture the layered structure of rocks, a hydraulic fracture simulator typically requires a fine mesh, which leads to a drastic reduction in computational performance. An alternative is to use more sophisticated models that are capable of providing reasonably accurate predictions even on a relatively coarse mesh. In the case of fracture growth modeling, the pivotal component of the simulation is a fracture front tracking algorithm that accounts for the layered structure of the formation. Consequently, this paper aims to extend the established Implicit Level Set Algorithm (ILSA) to account for the effect of multiple stress layers within the tip asymptote. The enhanced front tracking algorithm involves the stress-corrected asymptote that incorporates the influence of stress layers within the near-tip region. To further increase the validity region of the stress-corrected asymptote, the stress relaxation factor is introduced, and its accuracy is examined. The numerical algorithm is validated against the reference semi-analytical solutions as well as experimental observations. In addition, we investigate the sensitivity of the fracture geometry to mesh size to demonstrate that the front tracking algorithm based on the stress-corrected asymptote retains its accuracy on a coarse mesh.
△ Less
Submitted 23 May, 2023;
originally announced May 2023.
-
The coupling of an enhanced pseudo-3D model for hydraulic fracturing with a proppant transport model
Authors:
Arthur M. Skopintsev,
Egor V. Dontsov,
Pavel V. Kovtunenko,
Alexey N. Baykin,
Sergey V. Golovin
Abstract:
This paper presents the coupled model of a hydraulic fracturing and proppant transport. The former is described in terms of enhanced pseudo-3D model that considers height growth across two symmetric stress barriers, while the latter is given by two-dimensional transport model, stemming from the solution of an elliptical equation for fluid pressure and advection equation for the proppant transport.…
▽ More
This paper presents the coupled model of a hydraulic fracturing and proppant transport. The former is described in terms of enhanced pseudo-3D model that considers height growth across two symmetric stress barriers, while the latter is given by two-dimensional transport model, stemming from the solution of an elliptical equation for fluid pressure and advection equation for the proppant transport. These two sub-modules are solved numerically using implicit time integration in hydraulic part and explicit time stepping in the transport part. In addition to that, interpolation is used to couple the two models with different grids. Results of several numerical simulations are presented for different configurations to demonstrate the interplay between these two modules. In particular, the developed coupled scheme allows us to study phenomena associated with complex fluid flow within the fracture, such as for the case of Saffman-Taylor instability.
△ Less
Submitted 31 March, 2020; v1 submitted 12 March, 2020;
originally announced March 2020.
-
Non-symmetry of a hydraulic fracture due to the inhomogeneity of the reservoir
Authors:
Alexey N. Baykin,
Sergey V. Golovin
Abstract:
It is usually assumed that hydraulic fracture has two symmetrical wings with respect to the fluid injection point. Hence, authors limit themselves to modelling of one half of the fracture. In our work we demonstrate that the case of a symmetrical fracture occurs only in a homogeneous reservoir with constant physical parameters and confining {\it in situ} stress. Otherwise, inhomogeneity in the str…
▽ More
It is usually assumed that hydraulic fracture has two symmetrical wings with respect to the fluid injection point. Hence, authors limit themselves to modelling of one half of the fracture. In our work we demonstrate that the case of a symmetrical fracture occurs only in a homogeneous reservoir with constant physical parameters and confining {\it in situ} stress. Otherwise, inhomogeneity in the stress or the rock permeability can significantly change the dynamics of the fracture propagation. The mathematical model of the hydraulic fracturing used in the paper is adopted from our earlier work \cite{Golovin_Baykin_2016_Pore}. In present paper we perform numerical experiments demonstrating that in case of non-constant confining stress or reservoir permeability the fracture is developing non-symmetrically. An important role is played by the action of the backstress that is formed near the fracture due to the pore pressure. To support this observation we give a formal definition of the backstress and compare the values of the backstress acting on the two different fracture wings. These numerical experiments underline the importance of the proper modelling of the interaction between pore and fracturing fluids for the correct simulation of the hydraulic fracturing.
△ Less
Submitted 29 October, 2016;
originally announced October 2016.
-
Influence of pore pressure to the development of a hydraulic fracture in poroelastic medium
Authors:
Sergey V. Golovin,
Alexey N. Baykin
Abstract:
In this paper we demonstrate the influence of the pore pressure to the development of a hydraulically-driven fracture in a poroelastic medium. We present a novel numerical model for propagation of a planar hydraulic fracture and prove its correctness by demonstration of the numerical convergence and by comparison with known solutions. The advantage of the algorithm is that it does not require the…
▽ More
In this paper we demonstrate the influence of the pore pressure to the development of a hydraulically-driven fracture in a poroelastic medium. We present a novel numerical model for propagation of a planar hydraulic fracture and prove its correctness by demonstration of the numerical convergence and by comparison with known solutions. The advantage of the algorithm is that it does not require the distinguishing of the fracture's tips and reconstruction of the numerical mesh according to the fracture propagation. Next, we perform a thorough analysis of the interplay of fluid filtration and redistribution of stresses near the fracture. We demonstrate that the fracture length decreases with the increase of the Biot's number (the parameter that determines the contribution of the pore pressure to the stress) and explain this effect by analysing the near-fracture pore pressure, rock deformation and stresses. We conclude, that the correct account for the fluid exchange between the fracture and the rock should be based not only on physical parameters of the rock and fluid, but also on the analysis of stresses near the fracture.
△ Less
Submitted 29 August, 2016;
originally announced August 2016.
-
Peculiarities of the SEHRS and SERS Spectra of - Bipyridine Molecule
Authors:
Vladimir P. Chelibanov,
Alexander V. Golovin,
Aleksey M. Polubotko
Abstract:
The SEHRS and SERS spactra of 4,4 - Bipyridine are analyzed on the base of the Dipole-Quadrupole theory for two possible geometries of the molecule. It is demonstrated that there appear strong lines caused by vibrations transforming after a unit irreducible representation both for the geometry with D2 and D2h symmetry groups, which may probably describe the symmetry properties of the molecule. App…
▽ More
The SEHRS and SERS spactra of 4,4 - Bipyridine are analyzed on the base of the Dipole-Quadrupole theory for two possible geometries of the molecule. It is demonstrated that there appear strong lines caused by vibrations transforming after a unit irreducible representation both for the geometry with D2 and D2h symmetry groups, which may probably describe the symmetry properties of the molecule. Appearance of these lines is associated with a strong quadrupole light-molecule interaction, which arises in nano size rregions of sharp roughness of the metal. In addition, there are the lines caused by contributions from both the vibrations transforming after the unit irredicible representations A or Ag and the representations B1 or B1u, respectively, which describe transformational properties of the Ez component of the dipole moment, which is perpendicular to the surface for both geometries. This result is associated with a specific geometry of the molecule, when the indicated vibrations can be nearly degenerated and can not be resolved by the SEHRS and SERS spectra analysis. This issue is in a full compliance with the results of the SEHRS and SERS Dipole-Quadrupole theory.
△ Less
Submitted 7 April, 2016;
originally announced April 2016.
-
Fluid flow in a reservoir drained by a multiple fractured horizontal well
Authors:
S. V. Golovin,
K. A. Gadylshina
Abstract:
A mathematical model for computation of the fluid pressure in a reservoir drained by a horizontal multiple fractured well is proposed. The model is applicable for an arbitrary network of fractures with different finite conductivities of each segment, for variable in space and time physical parameters of the reservoir and for different field development plans. The variational formulation of the mod…
▽ More
A mathematical model for computation of the fluid pressure in a reservoir drained by a horizontal multiple fractured well is proposed. The model is applicable for an arbitrary network of fractures with different finite conductivities of each segment, for variable in space and time physical parameters of the reservoir and for different field development plans. The variational formulation of the model allows effective numerical simulation using the finite element method. Case studies demonstrate how the main flow characteristics (well productivity, pressure distribution) depend on the geometrical and physical characteristics of the reservoir and of the fracture network. The presented model is suitable for estimation of the productivity of a multiple fractured well and as an optimization tool for efficient reservoir development.
△ Less
Submitted 12 February, 2016;
originally announced February 2016.
-
Analysis of Peculiarities of the SEHRS Spectrum of - Bipyridine Molecule on the Base of the Dipole-Quadrupole Theory
Authors:
V. P. Chelibanov,
A. V. Golovin,
A. M. Polubotko
Abstract:
The SEHRS spectrum of 4,4' Bipyridine is analyzed on the base of the Dipole Quadrupole theory. It is demonstrated that there appear strong lines caused by vibrations transforming after a unit irreducible representation of the D2 symmetry group. which is most probably describes the symmetry properties of the molecule. These lines are nearly forbidden for the molecule, adsorbed on rough metal surfac…
▽ More
The SEHRS spectrum of 4,4' Bipyridine is analyzed on the base of the Dipole Quadrupole theory. It is demonstrated that there appear strong lines caused by vibrations transforming after a unit irreducible representation of the D2 symmetry group. which is most probably describes the symmetry properties of the molecule. These lines are nearly forbidden for the molecule, adsorbed on rough metal surface. Appearance of these lines is associated with a strong quadrupole light molecule interaction, which exists in this system. In addition, there are lines, caused by contributions from both the vibrations transforming after the unit irreducible representation A and the representation B1, which describes transformational properties of the dz component of the dipole moment, which is perpendicular to the surface. This result is associated with the specific geometry of the molecule, when the indicated vibrations can be nearly degenerated and cannot be resolved by the SEHRS spectra analysis. Analysis of the SEHRS spectra for the possible geometry of the molecule with the D2h symmetry group leads to similar results. This issue is in a full coincidence with the results of the SEHRS Dipole Quadrupole theory.
△ Less
Submitted 7 May, 2015;
originally announced May 2015.
-
Complete classification of stationary flows with constant total pressure of ideal incompressible infinitely conducting fluid
Authors:
S. V. Golovin,
M. K. Krutikov
Abstract:
The exhaustive classification of stationary incompressible flows with constant total pressure of ideal infinitely electrically conducting fluid is given. By introduction of curvilinear coordinates based on streamlines and magnetic lines of the flow the system of magnetohydrodynamics (MHD) equations is reduced to a nonlinear vector wave equation extended by the incompressibility condition in a form…
▽ More
The exhaustive classification of stationary incompressible flows with constant total pressure of ideal infinitely electrically conducting fluid is given. By introduction of curvilinear coordinates based on streamlines and magnetic lines of the flow the system of magnetohydrodynamics (MHD) equations is reduced to a nonlinear vector wave equation extended by the incompressibility condition in a form of a generalized Cauchy integral. For flows with constant total pressure the wave equation is explicitly integrated, whereas the incompressibility condition is reduced to a scalar equation for functions, depending on different sets of variables. The central difficulty of the investigation is the separation of variables in the scalar equation, and integration of the resulting overdetermined systems of nonlinear partially differential equations. The canonical representatives of all possible types of solutions together with equivalence transformations, that extend the canonical set to the whole amount of solutions are represented.
△ Less
Submitted 30 November, 2011;
originally announced November 2011.
-
Natural curvilinear coordinates for ideal magnetohydrodynamics equations. Solutions with constant total pressure
Authors:
Sergey V. Golovin
Abstract:
Equations of magneto-gasdynamics in the natural curvilinear system of coordinates where trajectories and magnetic lines play a role of coordinate curves are reduced to the nonlinear vector wave equation coupled with the incompressibility condition in the form of the generalized Cauchy integral. The symmetry group of obtained equation, equivalence transformation, and group classification with respe…
▽ More
Equations of magneto-gasdynamics in the natural curvilinear system of coordinates where trajectories and magnetic lines play a role of coordinate curves are reduced to the nonlinear vector wave equation coupled with the incompressibility condition in the form of the generalized Cauchy integral. The symmetry group of obtained equation, equivalence transformation, and group classification with respect to the constitutive equation are calculated. New exact solutions with functional arbitrariness describing non-stationary incompressible flows with constant total pressure are given by explicit formulae. The corresponding magnetic surfaces have the shape of deformed nested cylinders, tori, or knotted tubes.
△ Less
Submitted 6 August, 2010;
originally announced August 2010.
-
Long-term operation of a multi-channel cosmic muon system based on scintillation counters with MRS APD light readout
Authors:
A. Akindinov,
V. Golovin,
E. Grigoriev,
Yu. Grishuk,
S. Kuleshov,
D. Malkevich,
A. Martemiyanov,
A. Nedosekin,
M. Ryabinin,
K. Voloshin
Abstract:
A Cosmic Ray Test Facility (CRTF) is the first large-scale implementation of a scintillation triggering system based on a new scintillation technique known as START. In START, the scintillation light is collected and transported by WLS optical fibers, while light detection is performed by pairs of avalanche photodiodes with the Metal-Resistor-Semiconductor structure operated in the Geiger mode (…
▽ More
A Cosmic Ray Test Facility (CRTF) is the first large-scale implementation of a scintillation triggering system based on a new scintillation technique known as START. In START, the scintillation light is collected and transported by WLS optical fibers, while light detection is performed by pairs of avalanche photodiodes with the Metal-Resistor-Semiconductor structure operated in the Geiger mode (MRS APD). START delivers 100% efficiency of cosmic muon detection, while its intrinsic noise level is less than 10^{-2} Hz. CRTF, consisting of 160 START channels, has been continuously operated by the ALICE TOF collaboration for more than 25 000 hours, and has demonstrated a high level of stability. Fewer than 10% of MRS APDs had to be replaced during this period.
△ Less
Submitted 19 September, 2008;
originally announced September 2008.
-
Exact solution describing a shallow water flow in an extending stripe
Authors:
Sergey V. Golovin
Abstract:
Partially invariant solution to (2+1)D shallow water equation is constructed and investigated. The solution describes an extension of a stripe, bounded by linear source and drain of fluid. Realizations of smooth flow and of hydraulic jump are possible. Particle trajectories and sonic characteristics on the obtained solution are calculated.
Partially invariant solution to (2+1)D shallow water equation is constructed and investigated. The solution describes an extension of a stripe, bounded by linear source and drain of fluid. Realizations of smooth flow and of hydraulic jump are possible. Particle trajectories and sonic characteristics on the obtained solution are calculated.
△ Less
Submitted 28 February, 2008;
originally announced February 2008.
-
Multidimensional fluid motions with planar waves
Authors:
Sergey V. Golovin
Abstract:
In the classical one-dimensional solution of fluid dynamics equations all unknown functions depend only on time t and Cartesian coordinate x. Although fluid spreads in all directions (velocity vector has three components) the whole picture of motion is relatively simple: trajectory of one fluid particle from plane x=const completely determines motion of the whole plane. Basing on the symmetry an…
▽ More
In the classical one-dimensional solution of fluid dynamics equations all unknown functions depend only on time t and Cartesian coordinate x. Although fluid spreads in all directions (velocity vector has three components) the whole picture of motion is relatively simple: trajectory of one fluid particle from plane x=const completely determines motion of the whole plane. Basing on the symmetry analysis of differential equations we propose generalization of this solution allowing movements in different directions of fluid particles belonging to plane x=const. At that, all functions but an angle determining the direction of particle's motion depend on t and x only, whereas the angle depends on all coordinates. In this solution the whole picture of motion superposes from identical trajectories placed under different angles in 3D space. Orientations of the trajectories are restricted by a finite relation possessing functional arbitrariness. The solution describes three-dimensional nonlinear processes and singularities in infinitely conducting plasma, gas or incompressible liquid.
△ Less
Submitted 16 May, 2007;
originally announced May 2007.
-
START as the detector of choice for large-scale muon triggering systems
Authors:
A. Akindinov,
G. Bondarenko,
V. Golovin,
E. Grigoriev,
Yu. Grishuk,
D. Mal'kevich,
A. Martemiyanov,
A. Nedosekin,
M. Ryabinin,
V. Sheinkman,
A. Smirnitskiy,
K. Voloshin
Abstract:
Further progress in building high-granular large-scale systems based on Scintillation Tiles with MRS APD light readout (START) became possible thanks to the creation of an improved version of MRS APD. The cost of the system may now be significantly reduced by using inexpensive extruded scintillator. More than 160 START samples were assembled based on this design modification and proved to posses…
▽ More
Further progress in building high-granular large-scale systems based on Scintillation Tiles with MRS APD light readout (START) became possible thanks to the creation of an improved version of MRS APD. The cost of the system may now be significantly reduced by using inexpensive extruded scintillator. More than 160 START samples were assembled based on this design modification and proved to possess 100% MIP detection efficiency and the intrinsic noise rate of less than 0.08 Hz. Long-term stability of START characteristics was confirmed after 3.5 months of operation.
△ Less
Submitted 24 May, 2006;
originally announced May 2006.
-
Scintillation counter with MRS APD light readout
Authors:
A. Akindinov,
G. Bondarenko,
V. Golovin,
E. Grigoriev,
Yu. Grishuk,
D. Mal'kevich,
A. Martemiyanov,
M. Ryabinin,
A. Smirnitskiy,
K. Voloshin
Abstract:
START, a high-efficiency and low-noise scintillation detector for ionizing particles, was developed for the purpose of creating a high-granular system for triggering cosmic muons. Scintillation light in START is detected by MRS APDs (Avalanche Photo-Diodes with Metal-Resistance-Semiconductor structure), operated in the Geiger mode, which have 1 mm^2 sensitive areas. START is assembled from a 15…
▽ More
START, a high-efficiency and low-noise scintillation detector for ionizing particles, was developed for the purpose of creating a high-granular system for triggering cosmic muons. Scintillation light in START is detected by MRS APDs (Avalanche Photo-Diodes with Metal-Resistance-Semiconductor structure), operated in the Geiger mode, which have 1 mm^2 sensitive areas. START is assembled from a 15 x 15 x 1 cm^3 scintillating plastic plate, two MRS APDs and two pieces of wavelength-shifting optical fiber stacked in circular coils inside the plastic. The front-end electronic card is mounted directly on the detector. Tests with START have confirmed its operational consistency, over 99% efficiency of MIP registration and good homogeneity. START demonstrates a low intrinsic noise of about 10^{-2} Hz. If these detectors are to be mass-produced, the cost of a mosaic array of STARTs is estimated at a moderate level of 2-3 kUSD/m^2.
△ Less
Submitted 27 March, 2006;
originally announced March 2006.
-
100 ps time-of-flight resolution of Dielectric Resistive Plate Chamber
Authors:
A. Akindinov,
V. Golovin,
A. Martemiyanov,
V. Petrov,
V. Plotnikov,
A. Smirnitsky,
K. Voloshin
Abstract:
Time of flight of a minimum ionizing particle along a fixed base has been measured with a 100 ps accuracy by means of a Dielectric Resistive Plate Chamber (DRPC) with 4 x 0.3 mm gas gaps. DRPC timing characteristics have been studied with different applied voltages, discriminating thresholds and beam intensities. It may be stated that the time-of-flight resolution of gaseous detectors developed…
▽ More
Time of flight of a minimum ionizing particle along a fixed base has been measured with a 100 ps accuracy by means of a Dielectric Resistive Plate Chamber (DRPC) with 4 x 0.3 mm gas gaps. DRPC timing characteristics have been studied with different applied voltages, discriminating thresholds and beam intensities. It may be stated that the time-of-flight resolution of gaseous detectors developed within the ALICE experiment has reached the level of the best known scintillation counters.
△ Less
Submitted 21 February, 2005;
originally announced February 2005.
-
Dielectric Resistive Plate Chamber as a detector for time-of-flight measurements
Authors:
A. Akindinov,
V. Golovin,
A. Martemiyanov,
V. Petrov,
A. Smirnitskiy,
K. Voloshin
Abstract:
Principles of operation, construction and first test results of a Dielectric Resistive Plate Chamber (DRPC) are described. The detector has shown stability of operation in the avalanche mode of gas amplfication within a wide range of applied voltages. Double-gap DRPCs have demonstrated the MIP registration efficiency of 97% and the time resolution of 180-200 ps. No changes in DRPC operation have…
▽ More
Principles of operation, construction and first test results of a Dielectric Resistive Plate Chamber (DRPC) are described. The detector has shown stability of operation in the avalanche mode of gas amplfication within a wide range of applied voltages. Double-gap DRPCs have demonstrated the MIP registration efficiency of 97% and the time resolution of 180-200 ps. No changes in DRPC operation have been observed with test beam intensities up to 10^3 Hz/cm^2.
△ Less
Submitted 2 December, 2004; v1 submitted 15 October, 2004;
originally announced October 2004.
