-
Inhomogeneous Deformation of Brain Tissue During Tension Tests
Authors:
Badar Rashid,
Michel Destrade,
Michael D. Gilchrist
Abstract:
Mechanical characterization of brain tissue has been investigated extensively by various research groups over the past fifty years. These properties are particularly important for modelling Traumatic Brain Injury (TBI). In this research, we present the design and calibration of a High Rate Tension Device (HRTD) capable of performing tests up to a maximum strain rate of 90/s. We use experimental an…
▽ More
Mechanical characterization of brain tissue has been investigated extensively by various research groups over the past fifty years. These properties are particularly important for modelling Traumatic Brain Injury (TBI). In this research, we present the design and calibration of a High Rate Tension Device (HRTD) capable of performing tests up to a maximum strain rate of 90/s. We use experimental and numerical methods to investigate the effects of inhomogeneous deformation of porcine brain tissue during tension at different specimen thicknesses (4.0-14.0 mm), by performing tension tests at a strain rate of 30/s. One-term Ogden material parameters (mu = 4395.0 Pa, alpha = -2.8) were derived by performing an inverse finite element analysis to model all experimental data. A similar procedure was adopted to determine Young's modulus (E= 11200 Pa) of the linear elastic regime. Based on this analysis, brain specimens of aspect ratio (diameter/thickness) S < 1.0 are required to minimise the effects of inhomogeneous deformation during tension tests.
△ Less
Submitted 28 February, 2013;
originally announced March 2013.
-
Characterising the Anisotropic Mechanical Properties of Excised Human Skin
Authors:
Aisling Ni Annaidh,
Karine Bruyere,
Michel Destrade,
Michael D. Gilchrist,
Melanie Ottenio
Abstract:
The mechanical properties of skin are important for a number of applications including surgery, dermatology, impact biomechanics and forensic science. In this study we have investigated the influence of location and orientation on the deformation characteristics of 56 samples of excised human skin. Uniaxial tensile tests were carried out at a strain rate of 0.012s$^{-1}$ on skin from the back. Dig…
▽ More
The mechanical properties of skin are important for a number of applications including surgery, dermatology, impact biomechanics and forensic science. In this study we have investigated the influence of location and orientation on the deformation characteristics of 56 samples of excised human skin. Uniaxial tensile tests were carried out at a strain rate of 0.012s$^{-1}$ on skin from the back. Digital Image Correlation was used for 2D strain measurement and a histological examination of the dermis was also performed. The mean ultimate tensile strength (UTS) was 21.6$\pm$8.4MPa, the mean failure strain 54$\pm$17%, the mean initial slope 1.18$\pm$0.88MPa, the mean elastic modulus 83.3$\pm$34.9MPa and the mean strain energy was 3.6$\pm$1.6MJ/m$^3$. A multivariate analysis of variance has shown that these mechanical properties of skin are dependent upon the orientation of Langer lines (P$<$0.0001-P=0.046). The location of specimens on the back was also found to have a significant effect on the UTS (P =0.0002), the elastic modulus (P=0.001) and the strain energy (P=0.0052). The histological investigation concluded that there is a definite correlation between the orientation of Langer Lines and the preferred orientation of collagen fibres in the dermis (P$<$0.001). The data obtained in this study will provide essential information for those wishing to model the skin using a structural constitutive model.
△ Less
Submitted 13 February, 2013;
originally announced February 2013.
-
Onset of Non-Linearity in the Elastic Bending of Blocks
Authors:
Michel Destrade,
Michael D. Gilchrist,
Jerry G. Murphy
Abstract:
The classical flexure problem of non-linear incompressible elasticity is revisited assuming that the bending angle suffered by the block is specified instead of the usual applied moment. The general moment-bending angle relationship is then obtained and is shown to be dependent on only one non-dimensional parameter: the product of the aspect ratio of the block and the bending angle. A Maclaurin se…
▽ More
The classical flexure problem of non-linear incompressible elasticity is revisited assuming that the bending angle suffered by the block is specified instead of the usual applied moment. The general moment-bending angle relationship is then obtained and is shown to be dependent on only one non-dimensional parameter: the product of the aspect ratio of the block and the bending angle. A Maclaurin series expansion in this parameter is then found. The first-order term is proportional to $μ$, the shear modulus of linear elasticity; the second-order term is identically zero, because the moment is an odd function of the angle; and the third-order term is proportional to $μ(4β-1)$, where $β$ is the non-linear shear coefficient, involving third-order and fourth-order elasticity constants. It follows that bending experiments provide an alternative way of estimating this coefficient, and the results of one such experiment are presented. In passing, the coefficients of Rivlin's expansion in exact non-linear elasticity are connected to those of Landau in weakly (fourth-order) non-linear elasticity.
△ Less
Submitted 25 January, 2013;
originally announced January 2013.
-
Third- and fourth-order elasticity of biological soft tissues
Authors:
Michel Destrade,
Michael D. Gilchrist,
Raymond W. Ogden
Abstract:
In the theory of weakly non-linear elasticity, Hamilton et al. [J. Acoust. Soc. Am. \textbf{116} (2004) 41] identified $W = μI_2 + (A/3)I_3 + D I_2^2$ as the fourth-order expansion of the strain-energy density for incompressible isotropic solids. Subsequently, much effort focused on theoretical and experimental developments linked to this expression in order to inform the modeling of gels and soft…
▽ More
In the theory of weakly non-linear elasticity, Hamilton et al. [J. Acoust. Soc. Am. \textbf{116} (2004) 41] identified $W = μI_2 + (A/3)I_3 + D I_2^2$ as the fourth-order expansion of the strain-energy density for incompressible isotropic solids. Subsequently, much effort focused on theoretical and experimental developments linked to this expression in order to inform the modeling of gels and soft biological tissues. However, while many soft tissues can be treated as incompressible, they are not in general isotropic, and their anisotropy is associated with the presence of oriented collagen fiber bundles. Here the expansion of $W$ is carried up to fourth-order in the case where there exists one family of parallel fibers in the tissue. The results are then applied to acoustoelasticity, with a view to determining the second- and third-order nonlinear constants by employing small-amplitude transverse waves propagating in a deformed soft tissue.
△ Less
Submitted 24 January, 2013;
originally announced January 2013.
-
Automated Estimation of Collagen Fibre Dispersion in the Dermis and its Contribution to the Anisotropic Behaviour of Skin
Authors:
Aisling Ní Annaidh,
Karine Bruyère,
Michel Destrade,
Michael D. Gilchrist,
Corrado Maurini,
Melanie Otténio,
Giuseppe Saccomandi
Abstract:
Collagen fibres play an important role in the mechanical behaviour of many soft tissues. Modelling of such tissues now often incorporates a collagen fibre distribution. However, the availability of accurate structural data has so far lagged behind the progress of anisotropic constitutive modelling. Here, an automated process is developed to identify the orientation of collagen fibres using inexpen…
▽ More
Collagen fibres play an important role in the mechanical behaviour of many soft tissues. Modelling of such tissues now often incorporates a collagen fibre distribution. However, the availability of accurate structural data has so far lagged behind the progress of anisotropic constitutive modelling. Here, an automated process is developed to identify the orientation of collagen fibres using inexpensive and relatively simple techniques. The method uses established histological techniques and an algorithm implemented in the MATLAB image processing toolbox. It takes an average of 15 s to evaluate one image, compared to several hours if assessed visually. The technique was applied to histological sections of human skin with different Langer line orientations and a definite correlation between the orientation of Langer lines and the preferred orientation of collagen fibres in the dermis was observed. The structural parameters of the Gasser-Ogden-Holzapfel (GOH) model were all successfully evaluated. It is expected that the results of this study will assist those wishing to model skin, and that the algorithm described will be of benefit to those who wish to evaluate the collagen dispersion of other soft tissues.
△ Less
Submitted 21 March, 2012;
originally announced March 2012.
-
Surface instability of sheared soft tissues
Authors:
M. Destrade,
M. D. Gilchrist,
D. A. Prikazchikov,
G. Saccomandi
Abstract:
When a block made of an elastomer is subjected to large shear, its surface remains flat. When a block of biological soft tissue is subjected to large shear, it is likely that its surface in the plane of shear will buckle (apparition of wrinkles). One factor that distinguishes soft tissues from rubber-like solids is the presence -- sometimes visible to the naked eye -- of oriented collagen fibre…
▽ More
When a block made of an elastomer is subjected to large shear, its surface remains flat. When a block of biological soft tissue is subjected to large shear, it is likely that its surface in the plane of shear will buckle (apparition of wrinkles). One factor that distinguishes soft tissues from rubber-like solids is the presence -- sometimes visible to the naked eye -- of oriented collagen fibre bundles, which are stiffer than the elastin matrix into which they are embedded but are nonetheless flexible and extensible. Here we show that the simplest model of isotropic nonlinear elasticity, namely the incompressible neo-Hookean model, suffers surface instability in shear only at tremendous amounts of shear, i.e., above 3.09, which corresponds to a 72 degrees angle of shear. Next we incorporate a family of parallel fibres in the model and show that the resulting solid can be either reinforced or strongly weakened with respect to surface instability, depending on the angle between the fibres and the direction of shear, and depending on the ratio E/mu between the stiffness of the fibres and that of the matrix. For this ratio we use values compatible with experimental data on soft tissues. Broadly speaking, we find that the surface becomes rapidly unstable when the shear takes place "against" the fibres, and that as E/mu increases, so does the sector of angles where early instability is expected to occur.
△ Less
Submitted 6 December, 2008;
originally announced December 2008.
-
Mechanics of Stabbing: Biaxial Measurement of Knife Stab Penetration of Skin Simulant
Authors:
Michael D. Gilchrist,
Stephen Keenan,
Michael Curtis,
Mary Cassidy,
Greg Byrne,
Michel Destrade
Abstract:
In medicolegal situations, the consequences of a stabbing incident are described in terms that are qualitative without being quantitative. Here, the mechanical variables involved in knife-tissue penetration events are used to determine the parameters needed to be controlled in a measurement device. They include knife geometry, in-plane mechanical stress state of skin, angle and speed of knife pe…
▽ More
In medicolegal situations, the consequences of a stabbing incident are described in terms that are qualitative without being quantitative. Here, the mechanical variables involved in knife-tissue penetration events are used to determine the parameters needed to be controlled in a measurement device. They include knife geometry, in-plane mechanical stress state of skin, angle and speed of knife penetration, and underlying fascia. Four household knives with different geometries were used. Synthetic materials were used to simulate the response of skin, fat and cartilage: polyurethane, foam, and ballistic soap, respectively. The force and energy applied by the blade and the skin displacement were used to identify skin penetration. The skin tension is shown to have a direct effect on the force and energy for knife penetration and on the depth of displacement of the simulant prior to penetration: larger levels of in-plane tension in the skin are associated with lower penetration forces, energies and displacements. Less force and energy are required for puncture when the blade is parallel to a direction of greater skin tension than when perpendicular. Surprisingly, evidence suggests that the quality control processes used to manufacture knives fail to produce consistently uniform blade points in nominally identical knives, leading to penetration forces which can vary widely.
△ Less
Submitted 24 November, 2008;
originally announced November 2008.
