-
Hypersonic Boundary Layer Transition and Heat Loading
Authors:
Ahmad Peyvan,
Luis Bravo,
Anindya Ghoshal,
Olaf Marxen,
George Karniadakis
Abstract:
Hypersonic boundary layer transition using high-order methods for direct numerical simulations (DNS) is largely unexplored, although a few references exist in the literature. Experimental data in the hypersonic regime are scarce, while almost all existing hypersonic codes have low-order accuracy, which could lead to erroneous results in long-time integration and at high Reynolds numbers. Here, we…
▽ More
Hypersonic boundary layer transition using high-order methods for direct numerical simulations (DNS) is largely unexplored, although a few references exist in the literature. Experimental data in the hypersonic regime are scarce, while almost all existing hypersonic codes have low-order accuracy, which could lead to erroneous results in long-time integration and at high Reynolds numbers. Here, we focus on the transition from laminar to turbulent flow, where the Nusselt number may be five times or higher than the Nusselt number in the turbulent regime. The hypersonic flow regime must be modeled accurately using realistic chemistry to predict heat flux on the surface correctly. In this study, we simulate hypersonic boundary layer transition on a flat plate to compute the thermal and shear stresses on the wall. The domain is initialized with a laminar Blasius solution of compressible boundary layer equations. The transition to turbulence is induced using suction and blowing from a thin strip on the wall. Sponge regions are defined at the inflow and outflow boundaries to eliminate the solution contamination due to the reflections of the boundary conditions. In the spanwise direction, periodic boundary conditions are imposed. The numerical method applied here is a sixth-order compact finite difference in the interior of the domain coupled with a fourth-order Runge-Kutta time-stepping scheme for a structured Cartesian grid using staggered variables. The base finite difference code can perform simulations of non-equilibrium hypersonic flows. The numerical scheme is stabilized using the approximate deconvolution model (ADM) and artificial diffusion coefficients. We investigated the effect of non-equilibrium chemistry on the non-linear instability growth with hypersonic boundary layers. We also quantify thermal loads during the boundary layer laminar to turbulent transition for Mach number 10.
△ Less
Submitted 2 July, 2024;
originally announced July 2024.
-
Deep operator learning-based surrogate models for aerothermodynamic analysis of AEDC hypersonic waverider
Authors:
Khemraj Shukla,
Jasmine Ratchford,
Luis Bravo,
Vivek Oommen,
Nicholas Plewacki,
Anindya Ghoshal,
George Karniadakis
Abstract:
Neural networks are universal approximators that traditionally have been used to learn a map between function inputs and outputs. However, recent research has demonstrated that deep neural networks can be used to approximate operators, learning function-to-function mappings. Creating surrogate models to supplement computationally expensive hypersonic aerothermodynamic models in characterizing the…
▽ More
Neural networks are universal approximators that traditionally have been used to learn a map between function inputs and outputs. However, recent research has demonstrated that deep neural networks can be used to approximate operators, learning function-to-function mappings. Creating surrogate models to supplement computationally expensive hypersonic aerothermodynamic models in characterizing the response of flow fields at different angles of attack (AoA) is an ideal application of neural operators. We investigate the use of neural operators to infer flow fields (volume and surface quantities) around a geometry based on a 3D waverider model based on experimental data measured at the Arnold Engineering Development Center (AEDC) Hypervelocity Wind Tunnel Number 9. We use a DeepONet neural operator which consists of two neural networks, commonly called a branch and a trunk network. The final output is the inner product of the output of the branch network and the output of the trunk net. Because the flow field contains shocks across the entire volume, we conduct a two-step training approach of the DeepONet that facilitates accurate approximation of solutions even in the presence of discontinuities. We train various DeepONet models to understand and predict pressure $(p)$, density $(ρ)$, velocity $(u)$, heat flux $(Q_w)$, and total shear stress $(τ_{w})$ for the AEDC waverider geometry at Ma=7.36 across AoA that range from $-10^{\circ}$ to $10^{\circ}$ for surface quantities and from $-14^{\circ}$ to $14^{\circ}$ for volume quantities.
△ Less
Submitted 21 May, 2024;
originally announced May 2024.
-
Characterization of partial wetting by CMAS droplets using multiphase many-body dissipative particle dynamics and data-driven discovery based on PINNs
Authors:
Elham Kiyani,
Mahdi Kooshkbaghi,
Khemraj Shukla,
Rahul Babu Koneru,
Zhen Li,
Luis Bravo,
Anindya Ghoshal,
George Em Karniadakis,
Mikko Karttunen
Abstract:
The molten sand, a mixture of calcia, magnesia, alumina, and silicate, known as CMAS, is characterized by its high viscosity, density, and surface tension. The unique properties of CMAS make it a challenging material to deal with in high-temperature applications, requiring innovative solutions and materials to prevent its buildup and damage to critical equipment. Here, we use multiphase many-body…
▽ More
The molten sand, a mixture of calcia, magnesia, alumina, and silicate, known as CMAS, is characterized by its high viscosity, density, and surface tension. The unique properties of CMAS make it a challenging material to deal with in high-temperature applications, requiring innovative solutions and materials to prevent its buildup and damage to critical equipment. Here, we use multiphase many-body dissipative particle dynamics (mDPD) simulations to study the wetting dynamics of highly viscous molten CMAS droplets. The simulations are performed in three dimensions, with varying initial droplet sizes and equilibrium contact angles. We propose a coarse parametric ordinary differential equation (ODE) that captures the spreading radius behavior of the CMAS droplets. The ODE parameters are then identified based on the Physics-Informed Neural Network (PINN) framework. Subsequently, the closed form dependency of parameter values found by PINN on the initial radii and contact angles are given using symbolic regression. Finally, we employ Bayesian PINNs (B-PINNs) to assess and quantify the uncertainty associated with the discovered parameters. In brief, this study provides insight into spreading dynamics of CMAS droplets by fusing simple parametric ODE modeling and state-of-the-art machine learning techniques.
△ Less
Submitted 18 July, 2023;
originally announced July 2023.
-
Proceedings to the 25th International Workshop "What Comes Beyond the Standard Models", July 4 -- July 10, 2022, Bled, Slovenia
Authors:
R. Bernabei,
P. Belli,
A. Bussolotti,
V. Caracciolo,
R. Cerulli,
N. Ferrari,
A. Leoncini,
V. Merlo,
F. Montecchia,
F. Cappella,
A. dAngelo,
A. Incicchitti,
A. Mattei,
C. J. Dai,
X. H. Ma,
X. D. Sheng,
Z. P. Ye,
V. Beylin,
L. Bonora,
S. J. Brodsky,
Paul H. Frampton,
A. Ghoshal,
G. Lambiase,
S. Pal,
A. Paul
, et al. (29 additional authors not shown)
Abstract:
Proceedings for our meeting ``What comes beyond the Standard Models'', which covered a broad series of subjects.
Proceedings for our meeting ``What comes beyond the Standard Models'', which covered a broad series of subjects.
△ Less
Submitted 29 March, 2023;
originally announced March 2023.
-
Dynamic spreading and infiltration of a molten sand droplet on a porous surface
Authors:
Rahul Babu Koneru,
Garrett Foresman,
Alison Flatau,
Zhen Li,
Luis Bravo,
Muthuvel Murugan,
Anindya Ghoshal,
George Em Karniadakis
Abstract:
Compared to smooth surfaces, droplet spreading on porous surfaces is more complex and has relevance in many engineering applications. In this work, we investigate the infiltration dynamics of molten sand droplets on structured porous surfaces using the multiphase many-body dissipative particle dynamics (mDPD) method. We carry out three-dimensional simulations with different equilibrium contact ang…
▽ More
Compared to smooth surfaces, droplet spreading on porous surfaces is more complex and has relevance in many engineering applications. In this work, we investigate the infiltration dynamics of molten sand droplets on structured porous surfaces using the multiphase many-body dissipative particle dynamics (mDPD) method. We carry out three-dimensional simulations with different equilibrium contact angles and surface porosities. The temporal evolution of the radius of the wetted area follows a power law, as in the case of a smooth surface. The infiltration rate on the other hand is dictated by the competition between spreading and capillary inhibition of the pores. Additionally, the temporal evolution of the droplet height and the contact angle on the porous surface is also presented.
△ Less
Submitted 6 March, 2023;
originally announced March 2023.
-
Deposition of sand particles on a solid substrate in a high-temperature subsonic flow
Authors:
Rahul Babu Koneru,
Luis Bravo,
Muthuvel Murugan,
Anindya Ghoshal,
Alison Flatau
Abstract:
Ingestion of sand particles into gas turbine engines has been observed to cause damage to engine components and in some cases leads to catastrophic failure. One such mechanism responsible for engine failure occurs through the deposition of molten particles on the turbine blades in the hot-section of the engine. The deposited material reacts chemically and penetrates the thermal barrier coating (TB…
▽ More
Ingestion of sand particles into gas turbine engines has been observed to cause damage to engine components and in some cases leads to catastrophic failure. One such mechanism responsible for engine failure occurs through the deposition of molten particles on the turbine blades in the hot-section of the engine. The deposited material reacts chemically and penetrates the thermal barrier coating (TBC) on the turbines blades eventually damaging them. In this work, we investigate the deposition of sand particles on a solid substrate using two-way coupled Euler-Lagrange simulations. In these simulations, hot gas at 1700 K is issued from a circular inlet at Mach 0.3. Simultaneously, spherical mono-dispersed sand particles, modeled after the Calcia-Magnesia-Alumino-Silicates(CMAS), are injected at a constant mass flow rate of 1 gram per minute. The deposition of these particles on a solid substrate, placed 20 cm away from the inlet along the axial direction, is investigated. Simulations are carried out for three different synthetic sand particles CMAS, AFRL 02 and AFRL 03. The effect of Stokes number on particle properties such as number of particle depositions, rebound velocity and coefficient of restitution are investigated.
△ Less
Submitted 16 March, 2023; v1 submitted 3 February, 2023;
originally announced February 2023.
-
Deep neural operators can serve as accurate surrogates for shape optimization: A case study for airfoils
Authors:
Khemraj Shukla,
Vivek Oommen,
Ahmad Peyvan,
Michael Penwarden,
Luis Bravo,
Anindya Ghoshal,
Robert M. Kirby,
George Em Karniadakis
Abstract:
Deep neural operators, such as DeepONets, have changed the paradigm in high-dimensional nonlinear regression from function regression to (differential) operator regression, paving the way for significant changes in computational engineering applications. Here, we investigate the use of DeepONets to infer flow fields around unseen airfoils with the aim of shape optimization, an important design pro…
▽ More
Deep neural operators, such as DeepONets, have changed the paradigm in high-dimensional nonlinear regression from function regression to (differential) operator regression, paving the way for significant changes in computational engineering applications. Here, we investigate the use of DeepONets to infer flow fields around unseen airfoils with the aim of shape optimization, an important design problem in aerodynamics that typically taxes computational resources heavily. We present results which display little to no degradation in prediction accuracy, while reducing the online optimization cost by orders of magnitude. We consider NACA airfoils as a test case for our proposed approach, as their shape can be easily defined by the four-digit parametrization. We successfully optimize the constrained NACA four-digit problem with respect to maximizing the lift-to-drag ratio and validate all results by comparing them to a high-order CFD solver. We find that DeepONets have low generalization error, making them ideal for generating solutions of unseen shapes. Specifically, pressure, density, and velocity fields are accurately inferred at a fraction of a second, hence enabling the use of general objective functions beyond the maximization of the lift-to-drag ratio considered in the current work.
△ Less
Submitted 1 February, 2023;
originally announced February 2023.
-
The Forward Physics Facility at the High-Luminosity LHC
Authors:
Jonathan L. Feng,
Felix Kling,
Mary Hall Reno,
Juan Rojo,
Dennis Soldin,
Luis A. Anchordoqui,
Jamie Boyd,
Ahmed Ismail,
Lucian Harland-Lang,
Kevin J. Kelly,
Vishvas Pandey,
Sebastian Trojanowski,
Yu-Dai Tsai,
Jean-Marco Alameddine,
Takeshi Araki,
Akitaka Ariga,
Tomoko Ariga,
Kento Asai,
Alessandro Bacchetta,
Kincso Balazs,
Alan J. Barr,
Michele Battistin,
Jianming Bian,
Caterina Bertone,
Weidong Bai
, et al. (211 additional authors not shown)
Abstract:
High energy collisions at the High-Luminosity Large Hadron Collider (LHC) produce a large number of particles along the beam collision axis, outside of the acceptance of existing LHC experiments. The proposed Forward Physics Facility (FPF), to be located several hundred meters from the ATLAS interaction point and shielded by concrete and rock, will host a suite of experiments to probe Standard Mod…
▽ More
High energy collisions at the High-Luminosity Large Hadron Collider (LHC) produce a large number of particles along the beam collision axis, outside of the acceptance of existing LHC experiments. The proposed Forward Physics Facility (FPF), to be located several hundred meters from the ATLAS interaction point and shielded by concrete and rock, will host a suite of experiments to probe Standard Model (SM) processes and search for physics beyond the Standard Model (BSM). In this report, we review the status of the civil engineering plans and the experiments to explore the diverse physics signals that can be uniquely probed in the forward region. FPF experiments will be sensitive to a broad range of BSM physics through searches for new particle scattering or decay signatures and deviations from SM expectations in high statistics analyses with TeV neutrinos in this low-background environment. High statistics neutrino detection will also provide valuable data for fundamental topics in perturbative and non-perturbative QCD and in weak interactions. Experiments at the FPF will enable synergies between forward particle production at the LHC and astroparticle physics to be exploited. We report here on these physics topics, on infrastructure, detector, and simulation studies, and on future directions to realize the FPF's physics potential.
△ Less
Submitted 9 March, 2022;
originally announced March 2022.
-
Theory and simulation of electrokinetic fluctuations in electrolyte solutions at the mesoscale
Authors:
Mingge Deng,
Faisal Tushar,
Luis Bravo,
Anindya Ghoshal,
George Karniadakis,
Zhen Li
Abstract:
Electrolyte solutions play an important role in energy storage devices, whose performance highly relies on the electrokinetic processes at sub-micron scales.\ Although fluctuations and stochastic features become more critical at small scales, the long-range Coulomb interactions pose a particular challenge for both theoretical analysis and simulation of fluid systems with fluctuating hydrodynamic a…
▽ More
Electrolyte solutions play an important role in energy storage devices, whose performance highly relies on the electrokinetic processes at sub-micron scales.\ Although fluctuations and stochastic features become more critical at small scales, the long-range Coulomb interactions pose a particular challenge for both theoretical analysis and simulation of fluid systems with fluctuating hydrodynamic and electrostatic interactions. Here, we present a theoretical framework based on the Landau-Lifshitz theory to derive closed-form expressions of fluctuation correlations in electrolyte solutions, indicating significantly different decorrelation processes of ionic concentration fluctuations from hydrodynamic fluctuations, which provides insights for understanding transport phenomena of coupled fluctuating hydrodynamics and electrokinetics. Furthermore, we simulate fluctuating electrokinetic systems using both molecular dynamics (MD) with explicit ions and mesoscopic charged dissipative particle dynamics (cDPD) with semi-implicit ions, from which we identify that the spatial probability density functions of local charge density follow Gamma distribution at sub-nanometer scale (i.e., 0.3 nm) and converge to Gaussian distribution above nanometer scales (i.e., 1.55 nm), indicating the existence of a lower limit of length scale for mesoscale models using Gaussian fluctuations. The temporal correlation functions of both hydrodynamic and electrokinetic fluctuations are computed from all-atom MD and mesoscale cDPD simulations, showing a good agreement with the theoretical predictions based on the linearized fluctuating hydrodynamics theory.
△ Less
Submitted 12 July, 2021;
originally announced July 2021.
-
Trade-offs in phenotypic noise synchronize emergent topology to actively enhance transport in microbial environments
Authors:
Jayabrata Dhar,
Anh L. P. Thai,
Arkajyoti Ghoshal,
Luca Giomi,
Anupam Sengupta
Abstract:
Phenotypic noise underpins homeostasis and fitness of individual cells. Yet, the extent to which noise shapes cell-to-population properties in microbial active matter remains poorly understood. By quantifying variability in confluent \textit{E.coli} strains, we catalogue noise across different phenotypic traits. The noise, measured over different temperatures serving as proxy for cellular activity…
▽ More
Phenotypic noise underpins homeostasis and fitness of individual cells. Yet, the extent to which noise shapes cell-to-population properties in microbial active matter remains poorly understood. By quantifying variability in confluent \textit{E.coli} strains, we catalogue noise across different phenotypic traits. The noise, measured over different temperatures serving as proxy for cellular activity, spanned more than two orders of magnitude. The maximum noise was associated with the cell geometry and the critical colony area at the onset of mono-to-multilayer transition (MTMT), while the lower bound was set by the critical time of the MTMT. Our results, supported by a hydrodynamic model, suggest that a trade-off between the noise in the cell geometry and the growth rate can lead to the self-regulation of the MTMT timing. The MTMT cascades synchronous emergence of hydrodynamic fields, actively enhancing the micro-environmental transport. Our results highlight how interplay of phenotypic noise triggers emergent deterministic properties, and reveal the role of multifield topology--of the colony structure and hydrodynamics--to insulate confluent systems from the inherent noise associated with natural cell-environment settings.
△ Less
Submitted 4 May, 2021; v1 submitted 2 May, 2021;
originally announced May 2021.
