-
Weighted Multiplier Method for Source-Independent Waveform Inversion
Authors:
Ali Gholami,
Kamal Aghazade
Abstract:
The Lagrangian multiplier method has proven highly effective in addressing the ill-conditioning of full waveform inversion (FWI). It enables the development of robust and computationally efficient algorithms capable of converging to accurate velocity models, even from poor initial estimates. Traditionally, these methods optimize an Augmented Lagrangian (AL) function, using a scalar penalty paramet…
▽ More
The Lagrangian multiplier method has proven highly effective in addressing the ill-conditioning of full waveform inversion (FWI). It enables the development of robust and computationally efficient algorithms capable of converging to accurate velocity models, even from poor initial estimates. Traditionally, these methods optimize an Augmented Lagrangian (AL) function, using a scalar penalty parameter to weight the quadratic penalty term for wave-equation constraint violations. This penalty balances relaxation of the wave equation to improve data fit. However, it imposes uniform relaxation across the model, regardless of source location and the natural decay of seismic amplitudes. To overcome this, we propose a variable penalty strategy that introduces greater flexibility by assigning distance-dependent penalties to the wave-equation constraints. These nonstationary weights apply minimal penalties near the source and larger penalties with increasing distance. This compensates for amplitude decay and allows the wave equation to be satisfied more uniformly across the model. This eliminates the need for explicit source signature estimation and relaxes the requirement for source alignment with grid points, making the method more practical for real applications. The strategy is implemented in the dual formulation of the multiplier method, where model parameters are eliminated, reducing the problem to a fixed-point iteration for source multipliers. Once obtained, model parameters are recovered as a byproduct. Numerical experiments show that this method eliminates explicit source estimation and enhances convexity, improving robustness, convergence, and computational efficiency of FWI.
△ Less
Submitted 21 May, 2025;
originally announced May 2025.
-
Structure and dynamics of ionic liquids under shear flow
Authors:
Abbas Gholami,
Sebastian Kloth,
Zhen-Hao Xu,
Kurt Kremer,
Michael Vogel,
Torsten Stuehn,
Joseph F. Rudzinski
Abstract:
We investigate the intrinsic behavior of ionic liquids under shear flow, using a coarse-grained model of C4mim-PF6 as a prototypical example. The importance of long-ranged electrostatics is assessed as a function of shear rate by comparing Ewald and reaction field treatments. An appropriate comparison is achieved through the implementation of the proper Lees-Edwards boundary conditions within the…
▽ More
We investigate the intrinsic behavior of ionic liquids under shear flow, using a coarse-grained model of C4mim-PF6 as a prototypical example. The importance of long-ranged electrostatics is assessed as a function of shear rate by comparing Ewald and reaction field treatments. An appropriate comparison is achieved through the implementation of the proper Lees-Edwards boundary conditions within the ESPResSo++ simulation software. Our results demonstrate that while structural properties are relatively insensitive to the electrostatic treatment, the more accurate treatment via the Ewald approach is essential for studies of dynamics, in particular, at lower shear rates. Furthermore, we identify a critical shear rate beyond which structural and dynamical properties begin to deviate from equilibrium behavior, while remaining largely unchanged below this threshold. Finally, we demonstrate that the dynamic heterogeneity of the liquid decreases as a function of increasing shear rate, which can be primarily explained by the faster dynamics induced by the shear flow. These results hold relevance for investigations of process-dependent properties of ionic-liquid-based materials.
△ Less
Submitted 16 May, 2025;
originally announced May 2025.
-
Robust acoustic and elastic full waveform inversion by adaptive Tikhonov-TV regularization
Authors:
Kamal Aghazade,
Ali Gholami
Abstract:
Full Waveform Inversion (FWI) is a powerful wave-based imaging technique, but its inherent ill-posedness and non-convexity lead to local minima and poor convergence. Regularization methods stabilize FWI by incorporating prior information and enforcing structural constraints like smooth variations or piecewise-constant behavior. Among them, Tikhonov regularization promotes smoothness, while total v…
▽ More
Full Waveform Inversion (FWI) is a powerful wave-based imaging technique, but its inherent ill-posedness and non-convexity lead to local minima and poor convergence. Regularization methods stabilize FWI by incorporating prior information and enforcing structural constraints like smooth variations or piecewise-constant behavior. Among them, Tikhonov regularization promotes smoothness, while total variation (TV) regularization preserves sharp boundaries. However, in the context of FWI, we highlight two key shortcomings of these regularization methods. First, subsurface model parameters (P- and S-wave velocities, density) often exhibit complex geological formations with sharp discontinuities separating distinct layers, while parameters within each layer vary smoothly. Neither Tikhonov nor TV regularization alone can effectively constrain such piecewise-smooth structures. Second, and more critically, when the initial model is far from the true model, these regularization assumptions can lead to a local minimum. To address these issues, we propose adaptive Tikhonov-TV (TT) regularization, which decomposes the model into smooth and blocky components, enabling robust recovery of piecewise-smooth structures. Implemented within the ADMM framework, TT regularization incorporates an automated balancing strategy based on robust statistical analysis. Numerical experiments on acoustic and elastic FWI using benchmark geological models demonstrate that TT regularization significantly improves convergence and reconstruction accuracy compared to Tikhonov and TV regularization when applied separately. We show that for complex models and remote initial models, both Tikhonov and TV regularization tend to converge to local minima, whereas TT regularization effectively mitigates cycle skipping through its adaptive combination of the two regularization strategies.
△ Less
Submitted 6 May, 2025;
originally announced May 2025.
-
Fast Azimuthally Anisotropic 3D Radon Transform by Generalized Fourier Slice Theorem
Authors:
Ahmadreza Mokhtari,
Ali Gholami
Abstract:
Expensive computation of the conventional sparse Radon transform limits its use for effective transformation of 3D anisotropic seismic data cubes. We introduce a fast algorithm for azimuthally anisotropic 3D Radon transform with sparsity constraints, allowing effective transformation of seismic volumes corresponding to arbitrary anisotropic inhomogeneous media. In particular, a 3D data (CMP) cube…
▽ More
Expensive computation of the conventional sparse Radon transform limits its use for effective transformation of 3D anisotropic seismic data cubes. We introduce a fast algorithm for azimuthally anisotropic 3D Radon transform with sparsity constraints, allowing effective transformation of seismic volumes corresponding to arbitrary anisotropic inhomogeneous media. In particular, a 3D data (CMP) cube of time and offset coordinates is transformed to a 3D cube of intercept time, slowness, and azimuth. The recently proposed generalized Fourier slice theorem is employed for very fast calculation of the 3D inverse transformation and its adjoint, which are subsequently used for efficient implementation of the sparse transform via a forward-backward splitting algorithm. The new anisotropic transform improves the temporal resolution of the resulting seismic data. Furthermore, the Radon transform coefficients allows constructing azimuthally dependent NMO velocity curve at any horizontal plane, which can be inverted for the medium anisotropic parameters. Numerical examples using synthetic data sets are presented showing the effectiveness of the proposed anisotropic method in improving seismic processing results compared with conventional isotropic counterpart.
△ Less
Submitted 1 May, 2025;
originally announced May 2025.
-
Boundary Effects and Oxygen Deficiency-Driven Pattern Transitions in Algal Bioconvection
Authors:
S. Gore,
I. Gholami,
S. O. Ahmed,
T. Doskhozhina,
S. V. R. Ambadipudi,
A. J. Bae,
A. Gholami
Abstract:
Suspensions of motile microorganisms can spontaneously form large-scale fluid motion, known as bioconvection, characterized by dense downwelling plumes separated by broad upwelling regions. In this study, we investigate bioconvection in shallow suspensions of Chlamydomonas reinhardtii confined within spiral-shaped boundaries, combining detailed experiments with three-dimensional simulations. Under…
▽ More
Suspensions of motile microorganisms can spontaneously form large-scale fluid motion, known as bioconvection, characterized by dense downwelling plumes separated by broad upwelling regions. In this study, we investigate bioconvection in shallow suspensions of Chlamydomonas reinhardtii confined within spiral-shaped boundaries, combining detailed experiments with three-dimensional simulations. Under open liquid-air interfaces, cells accumulate near the surface via negative gravitaxis, generating spiral-shaped density patterns that subsequently fragment into lattice-like clusters, leading to plume formation. Space-time analyses demonstrate coherent rotational dynamics, with predominantly inward-directed motion near the spiral core and bidirectional motion further out. Introducing confinement by sealing the upper boundary with an air-impermeable wall triggers dramatic pattern transitions due to oxygen depletion: initially stable arrangements reorganize into new structures with significantly reduced wavelengths. Complementary numerical simulations, based on incompressible Navier-Stokes equations incorporating negative buoyancy and active swimmer stress, successfully replicate initial pattern formation, subsequent instability, fragmentation into plumes, and emergence of strong vortical flows-nearly an order of magnitude faster than individual cell swimming. However, these models do not capture oxygen depletion-driven transitions observed experimentally. Our results highlight that geometric confinement, oxygen availability, and metabolic transitions critically regulate bioconvection dynamics, offering novel strategies for controlling microbial self-organization and fluid transport.
△ Less
Submitted 28 June, 2025; v1 submitted 16 April, 2025;
originally announced April 2025.
-
Multiparticle Collision Dynamics Simulations of the Flagellar Apparatus in Chlamydomonas reinhardtii
Authors:
Sai Venkata Ramana Ambadipudi,
Albert Bae,
Azam Gholami
Abstract:
Using multiparticle collision dynamics simulations, we investigate the swimming dynamics, orientational behavior, and hydrodynamic interactions of a model swimmer designed to mimic the isolated flagellar apparatus ($FA$) of Chlamydomonas reinhardtii. We represent the $FA$ as a chain of monomers connected by elastic springs, with two traveling waves originating at its center and propagating in oppo…
▽ More
Using multiparticle collision dynamics simulations, we investigate the swimming dynamics, orientational behavior, and hydrodynamic interactions of a model swimmer designed to mimic the isolated flagellar apparatus ($FA$) of Chlamydomonas reinhardtii. We represent the $FA$ as a chain of monomers connected by elastic springs, with two traveling waves originating at its center and propagating in opposite directions along the chain. Our simulations show that an $FA$ whose beat pattern has non-zero mean curvature sustains ballistic motion for several hundred beats before transitioning to a diffusion-dominated regime via rotational diffusion. In contrast, a flagellar apparatus with zero mean curvature ($FA_0$) -- generates mirror-symmetric deformations and fails to achieve net propulsion. Both the active $FA$ and $FA_0$ exhibit orientational autocorrelation functions that decay exponentially -- matching those of their inactive counterparts -- indicating that active beating does not influence the FA's rotational diffusion. Driving the two flagellar arms at different frequencies reproduces the epitrochoid-like trajectory observed experimentally. Finally, hydrodynamic interactions between two $FA$s give rise to co-moving bound pairs in either parallel or antiparallel configurations, with their stability governed by the phase difference of the curvature waves. Together, our results establish a versatile model microswimmer with tunable dynamics -- offering a blueprint for the rational design of artificial, flagella-driven microswimmers.
△ Less
Submitted 30 June, 2025; v1 submitted 26 March, 2025;
originally announced March 2025.
-
Fast and Automatic Full Waveform Inversion by Dual Augmented Lagrangian
Authors:
Kamal Aghazade,
Ali Gholami
Abstract:
Full Waveform Inversion (FWI) stands as a nonlinear, high-resolution technology for subsurface imaging via surface-recorded data. This paper introduces an augmented Lagrangian dual formulation for FWI, rooted in the viewpoint that Lagrange multipliers serve as fundamental unknowns for the accurate linearization of the FWI problem. Once these multipliers are estimated, the determination of model pa…
▽ More
Full Waveform Inversion (FWI) stands as a nonlinear, high-resolution technology for subsurface imaging via surface-recorded data. This paper introduces an augmented Lagrangian dual formulation for FWI, rooted in the viewpoint that Lagrange multipliers serve as fundamental unknowns for the accurate linearization of the FWI problem. Once these multipliers are estimated, the determination of model parameters becomes simple. Therefore, unlike traditional primal algorithms, the proposed dual method circumvents direct engagement with model parameters or wavefields, instead tackling the estimation of Lagrange multipliers through a gradient ascent iteration. This approach yields two significant advantages: i) the background model remains fixed, requiring only one LU matrix factorization for each frequency inversion. ii) Convergence of the algorithm can be improved by leveraging techniques like quasi-Newton l-BFGS methods and Anderson acceleration. Numerical examples from elastic and acoustic FWI utilizing different benchmark models are provided, showing that the dual algorithm converges quickly and requires fewer computations than the standard primal algorithm.
△ Less
Submitted 12 December, 2024;
originally announced December 2024.
-
Electronics design and testing of the CMS Fast Beam Condition Monitor for HL-LHC
Authors:
K. Shibin,
G. Auzinger,
H. Bakhshiansohi,
A. Dabrowski,
A. Dierlamm,
M. Dragicevic,
A. Gholami,
G. Gomez,
M. Guthoff,
M. Haranko,
A. Homna,
M. Jenihhin,
J. Kaplon,
O. Karacheban,
B. Korcsmáros,
A. Lokhovitskiy,
R. Loos,
S. Mallows,
J. Michel,
V. Myronenko,
G. Pásztor,
J. Schwandt,
M. Sedghi,
A. Shevelev,
G. Steinbrueck
, et al. (2 additional authors not shown)
Abstract:
The high-luminosity upgrade of the LHC (HL-LHC) brings unprecedented requirements for precision bunch-by-bunch luminosity measurement and beam-induced background monitoring in real time. A key component of the CMS Beam Radiation Instrumentation and Luminosity detector system is a stand-alone luminometer, the Fast Beam Condition Monitor (FBCM), which is able to operate independently at all times wi…
▽ More
The high-luminosity upgrade of the LHC (HL-LHC) brings unprecedented requirements for precision bunch-by-bunch luminosity measurement and beam-induced background monitoring in real time. A key component of the CMS Beam Radiation Instrumentation and Luminosity detector system is a stand-alone luminometer, the Fast Beam Condition Monitor (FBCM), which is able to operate independently at all times with a triggerless asynchronous readout. FBCM utilizes a dedicated front-end ASIC to amplify the signals from CO$_2$-cooled silicon-pad sensors with 1 ns timing resolution. Front-end (FE) electronics are subject to high-radiation conditions, thus all components are radiation hardened: sensors, ASICs, transceivers, etc. The FBCM ASIC contains 6 channels, each outputting a high-speed binary signal carrying the time-of-arrival and time-over-threshold information. This signal is sent via a gigabit optical link to the back-end electronics for analysis. A dedicated test system is designed for the FBCM FE electronics with a modular setup for all testing needs of the project from initial ASIC validation test to system-level testing with the full read-out chain. The paper reports on the design, read-out architecture, and testing program for the FBCM electronics.
△ Less
Submitted 18 October, 2024;
originally announced October 2024.
-
Robust Estimation of Structural Orientation Parameters and 2D/3D Local Anisotropic Tikhonov Regularization
Authors:
Ali Gholami,
Silvia Gazzola
Abstract:
Understanding the orientation of geological structures is crucial for analyzing the complexity of the Earths' subsurface. For instance, information about geological structure orientation can be incorporated into local anisotropic regularization methods as a valuable tool to stabilize the solution of inverse problems and produce geologically plausible solutions. We introduce a new variational metho…
▽ More
Understanding the orientation of geological structures is crucial for analyzing the complexity of the Earths' subsurface. For instance, information about geological structure orientation can be incorporated into local anisotropic regularization methods as a valuable tool to stabilize the solution of inverse problems and produce geologically plausible solutions. We introduce a new variational method that employs the alternating direction method of multipliers within an alternating minimization scheme to jointly estimate orientation and model parameters in both 2D and 3D inverse problems. Specifically, the proposed approach adaptively integrates recovered information about structural orientation, enhancing the effectiveness of anisotropic Tikhonov regularization in recovering geophysical parameters. The paper also discusses the automatic tuning of algorithmic parameters to maximize the new method's performance. The proposed algorithm is tested across diverse 2D and 3D examples, including structure-oriented denoising and trace interpolation. The results show that the algorithm is robust in solving the considered large and challenging problems, alongside efficiently estimating the associated tilt field in 2D cases and the dip, strike, and tilt fields in 3D cases. Synthetic and field examples show that the proposed anisotropic regularization method produces a model with enhanced resolution and provides a more accurate representation of the true structures.
△ Less
Submitted 9 September, 2024;
originally announced September 2024.
-
Symmetry Breaking in Chemical Systems: Engineering Complexity through Self-Organization and Marangoni Flows
Authors:
Sangram Gore,
Binaya Paudyal,
Mohamed Ali,
Nader Masmoudi,
Albert Bae,
Oliver Steinbock,
Azam Gholami
Abstract:
Far from equilibrium, chemical and biological systems can form complex patterns and waves through reaction-diffusion coupling. Fluid motion often tends to disrupt these self-organized concentration patterns. In this study, we investigate the influence of Marangoni-driven flows inside a thin layer of fluid ascending the outer surfaces of hydrophilic obstacles on the spatio-temporal dynamics of chem…
▽ More
Far from equilibrium, chemical and biological systems can form complex patterns and waves through reaction-diffusion coupling. Fluid motion often tends to disrupt these self-organized concentration patterns. In this study, we investigate the influence of Marangoni-driven flows inside a thin layer of fluid ascending the outer surfaces of hydrophilic obstacles on the spatio-temporal dynamics of chemical waves in the modified Belousov-Zhabotinsky reaction. Our observations reveal that circular waves originate nearly simultaneously at the obstacles and propagate outward. In a covered setup, where evaporation is minimal, the wavefronts maintain their circular shape. However, in an uncovered setup with significant evaporative cooling, the interplay between surface tension-driven Marangoni flows and gravity destabilizes the wavefronts, creating distinctive flower-like patterns around the obstacles. Our experiments further show that the number of petals formed increases linearly with the obstacle's diameter, though a minimum diameter is required for these instabilities to appear. These findings demonstrate the potential to 'engineer' specific wave patterns, offering a method to control and direct reaction dynamics. This capability is especially important for developing microfluidic devices requiring precise control over chemical wave propagation.
△ Less
Submitted 15 April, 2025; v1 submitted 25 June, 2024;
originally announced June 2024.
-
Robust elastic full-waveform inversion using an alternating direction method of multipliers with reconstructed wavefields
Authors:
Kamal Aghazade,
Ali Gholami,
Hossein S. Aghamiry,
Hamid Reza Siahkoohi
Abstract:
Elastic full-waveform inversion (EFWI) is a process used to estimate subsurface properties by fitting seismic data while satisfying wave propagation physics. The problem is formulated as a least-squares data fitting minimization problem with two sets of constraints: Partial-differential equation (PDE) constraints governing elastic wave propagation and physical model constraints implementing prior…
▽ More
Elastic full-waveform inversion (EFWI) is a process used to estimate subsurface properties by fitting seismic data while satisfying wave propagation physics. The problem is formulated as a least-squares data fitting minimization problem with two sets of constraints: Partial-differential equation (PDE) constraints governing elastic wave propagation and physical model constraints implementing prior information. The alternating direction method of multipliers is used to solve the problem, resulting in an iterative algorithm with well-conditioned subproblems. Although wavefield reconstruction is the most challenging part of the iteration, sparse linear algebra techniques can be used for moderate-sized problems and frequency domain formulations. The Hessian matrix is blocky with diagonal blocks, making model updates fast. Gradient ascent is used to update Lagrange multipliers by summing PDE violations. Various numerical examples are used to investigate algorithmic components, including model parameterizations, physical model constraints, the role of the Hessian matrix in suppressing interparameter cross-talk, computational efficiency with the source sketching method, and the effect of noise and near-surface effects.
△ Less
Submitted 11 April, 2024;
originally announced April 2024.
-
The CMS Fast Beam Condition Monitor for HL-LHC
Authors:
G. Auzinger,
H. Bakhshiansohi,
A. Dabrowski,
A. G. Delannoy,
A. Dierlamm,
M. Dragicevic,
A. Gholami,
G. Gomez,
M. Guthoff,
M. Haranko,
A. Homna,
M. Jenihhin,
J. Kaplon,
O. Karacheban,
B. Korcsmáros,
W. H. Liu,
A. Lokhovitskiy,
R. Loos,
S. Mallows,
J. Michel,
V. Myronenko,
G. Pásztor,
M. Pari,
J. Schwandt,
M. Sedghi
, et al. (6 additional authors not shown)
Abstract:
The high-luminosity upgrade of the LHC brings unprecedented requirements for real-time and precision bunch-by-bunch online luminosity measurement and beam-induced background monitoring. A key component of the CMS Beam Radiation, Instrumentation and Luminosity system is a stand-alone luminometer, the Fast Beam Condition Monitor (FBCM), which is fully independent from the CMS central trigger and dat…
▽ More
The high-luminosity upgrade of the LHC brings unprecedented requirements for real-time and precision bunch-by-bunch online luminosity measurement and beam-induced background monitoring. A key component of the CMS Beam Radiation, Instrumentation and Luminosity system is a stand-alone luminometer, the Fast Beam Condition Monitor (FBCM), which is fully independent from the CMS central trigger and data acquisition services and able to operate at all times with a triggerless readout. FBCM utilizes a dedicated front-end application-specific integrated circuit (ASIC) to amplify the signals from CO$_2$-cooled silicon-pad sensors with a timing resolution of a few nanoseconds, which enables the measurement of the beam-induced background. FBCM uses a modular design with two half-disks of twelve modules at each end of CMS, with four service modules placed close to the outer edge to reduce radiation-induced aging. The electronics system design adapts several components from the CMS Tracker for power, control and read-out functionalities. The dedicated FBCM23 ASIC contains six channels and adjustable shaping time to optimize the noise with regards to sensor leakage current. Each ASIC channel outputs a single binary high-speed asynchronous signal carrying time-of-arrival and time-over-threshold information. The chip output signal is digitized, encoded and sent via a radiation-hard gigabit transceiver and an optical link to the back-end electronics for analysis. This paper reports on the updated design of the FBCM detector and the ongoing testing program.
△ Less
Submitted 6 February, 2024;
originally announced February 2024.
-
End-to-end codesign of Hessian-aware quantized neural networks for FPGAs and ASICs
Authors:
Javier Campos,
Zhen Dong,
Javier Duarte,
Amir Gholami,
Michael W. Mahoney,
Jovan Mitrevski,
Nhan Tran
Abstract:
We develop an end-to-end workflow for the training and implementation of co-designed neural networks (NNs) for efficient field-programmable gate array (FPGA) and application-specific integrated circuit (ASIC) hardware. Our approach leverages Hessian-aware quantization (HAWQ) of NNs, the Quantized Open Neural Network Exchange (QONNX) intermediate representation, and the hls4ml tool flow for transpi…
▽ More
We develop an end-to-end workflow for the training and implementation of co-designed neural networks (NNs) for efficient field-programmable gate array (FPGA) and application-specific integrated circuit (ASIC) hardware. Our approach leverages Hessian-aware quantization (HAWQ) of NNs, the Quantized Open Neural Network Exchange (QONNX) intermediate representation, and the hls4ml tool flow for transpiling NNs into FPGA and ASIC firmware. This makes efficient NN implementations in hardware accessible to nonexperts, in a single open-sourced workflow that can be deployed for real-time machine learning applications in a wide range of scientific and industrial settings. We demonstrate the workflow in a particle physics application involving trigger decisions that must operate at the 40 MHz collision rate of the CERN Large Hadron Collider (LHC). Given the high collision rate, all data processing must be implemented on custom ASIC and FPGA hardware within a strict area and latency. Based on these constraints, we implement an optimized mixed-precision NN classifier for high-momentum particle jets in simulated LHC proton-proton collisions.
△ Less
Submitted 13 April, 2023;
originally announced April 2023.
-
A practical implementation of data-space Hessian in the time-domain extended-source full-waveform inversion
Authors:
Gaoshan Guo,
Stephane Operto,
Ali Gholami,
Hossein S. Aghamiry
Abstract:
Full-waveform inversion (FWI) with extended sources first computes wavefields with data-driven source extensions, such that the simulated data in inaccurate velocity models match the observed counterpart well enough to prevent cycle skipping. Then, the source extensions are minimized to update the model parameters. This two-step workflow is iterated until both data and sources are matched. It was…
▽ More
Full-waveform inversion (FWI) with extended sources first computes wavefields with data-driven source extensions, such that the simulated data in inaccurate velocity models match the observed counterpart well enough to prevent cycle skipping. Then, the source extensions are minimized to update the model parameters. This two-step workflow is iterated until both data and sources are matched. It was recently shown that the source extensions are the least-squares solutions of the recorded scattered data fitting problem. As a result, they are computed by propagating backward in time the deblurred FWI data residuals, where the deblurring operator is the inverse of the damped data-domain Hessian of the scattering-source estimation problem. Estimating the deblurred data residuals is the main computational bottleneck of time-domain extended-source FWI (ES-FWI). To mitigate this issue, we first estimate them when the inverse of the data-domain Hessians is approximated by matching filters in Fourier and short-time Fourier domains. Second, we refine them with conjugate-gradient iterations when necessary. Computing the matching filters and performing one conjugate-gradient iteration each require two simulations per source. Therefore, it is critical to design some workflows that minimize this computational burden. We implement time-domain ES-FWI with the augmented Lagrangian method. Moreover, we further extend its linear regime with a multiscale frequency continuation approach, which is combined with grid coarsening to mitigate the computational burden and regularize the inversion. Finally, we use total-variation regularization to deal with large-contrast reconstruction. We present synthetic cases where different inversion workflows carried out with data-domain Hessians of variable accuracy were assessed with the aim at converging toward accurate solutions while minimizing computational cost.
△ Less
Submitted 2 March, 2023;
originally announced March 2023.
-
An extended Gauss-Newton method for full waveform inversion
Authors:
Ali Gholami
Abstract:
Full waveform inversion (FWI) is a large-scale nonlinear ill-posed problem for which computationally expensive Newton-type methods can become trapped in undesirable local minima, particularly when the initial model lacks a low-wavenumber component and the recorded data lacks low-frequency content. A modification to the Gauss-Newton (GN) method is proposed to address these issues. The standard GN s…
▽ More
Full waveform inversion (FWI) is a large-scale nonlinear ill-posed problem for which computationally expensive Newton-type methods can become trapped in undesirable local minima, particularly when the initial model lacks a low-wavenumber component and the recorded data lacks low-frequency content. A modification to the Gauss-Newton (GN) method is proposed to address these issues. The standard GN system for multisource multireceiver FWI is reformulated into an equivalent matrix equation form, with the solution becoming a diagonal matrix rather than a vector as in the standard system. The search direction is transformed from a vector to a matrix by relaxing the diagonality constraint, effectively adding a degree of freedom to the subsurface offset axis. The relaxed system can be explicitly solved with only the inversion of two small matrices that deblur the data residual matrix along the source and receiver dimensions, which simplifies the inversion of the Hessian matrix. When used to solve the extended source FWI objective function, the Extended GN (EGN) method integrates the benefits of both model and source extension. The EGN method effectively combines the computational effectiveness of the reduced FWI method with the robustness characteristics of extended formulations and offers a promising solution for addressing the challenges of FWI. It bridges the gap between these extended formulations and the reduced FWI method, enhancing inversion robustness while maintaining computational efficiency. The robustness and stability of the EGN algorithm for waveform inversion are demonstrated numerically.
△ Less
Submitted 22 February, 2024; v1 submitted 8 February, 2023;
originally announced February 2023.
-
Full waveform inversion beyond the Born approximation: A tutorial review
Authors:
Stephane Operto,
Ali Gholami,
Hossein S. Aghamiry,
Gaoshan Guo,
Frichnel Mamfoumbi,
Stephen Beller
Abstract:
Full Waveform Inversion can be made immune to cycle skipping by matching the recorded data arbitrarily well from inaccurate subsurface models. To achieve this goal, the simulated wavefields can be computed in an extended search space as the solution of an overdetermined problem aiming at jointly satisfying the wave equation and fitting the data in a least-squares sense. Simply put, the wavefields…
▽ More
Full Waveform Inversion can be made immune to cycle skipping by matching the recorded data arbitrarily well from inaccurate subsurface models. To achieve this goal, the simulated wavefields can be computed in an extended search space as the solution of an overdetermined problem aiming at jointly satisfying the wave equation and fitting the data in a least-squares sense. Simply put, the wavefields are computed by solving the wave equation in the inaccurate background model with a feedback term to the data added to the physical source in the right-hand side. Then, the subsurface parameters are updated by canceling out these additional source terms, sometimes called unwisely wave-equation errors, to push the background model toward the true model in the left-hand side wave-equation operator. Although many studies were devoted to these approaches with promising numerical results, their governing physical principles and their relationships with classical FWI don't seem to be understood well yet. The goal of this tutorial is to review these principles in the theoretical framework of inverse scattering theory whose governing forward equation is the Lippmann-Schwinger equation. From this equation, we show how the data-assimilated wavefields embed an approximation of the scattered field generated by the sought model perturbation and how they modify the sensitivity kernel of classical FWI beyond the Born approximation. We also clarify how the approximation with which these wavefields approximate the unknown true wavefields is accounted for in the adjoint source of the parameter estimation problem. The theory is finally illustrated with numerical examples. Understanding the physical principles governing these methods is a necessary prerequisite to assessing their potential and limits and designing relevant heuristics to manage the latter.
△ Less
Submitted 11 January, 2023; v1 submitted 20 December, 2022;
originally announced December 2022.
-
Simulation of a particle domain in a continuum/fluctuating hydrodynamics reservoir
Authors:
Abbas Gholami,
Rupert Klein,
Luigi Delle Site
Abstract:
In molecular simulation and fluid mechanics, the coupling of a particle domain with a continuum representation of its embedding environment is an ongoing challenge. In this work, we show a novel approach where the latest version of the adaptive resolution scheme (AdResS), with non-interacting tracers as particles reservoir, is combined with a fluctuating hydrodynamics (FHD) solver. The resulting a…
▽ More
In molecular simulation and fluid mechanics, the coupling of a particle domain with a continuum representation of its embedding environment is an ongoing challenge. In this work, we show a novel approach where the latest version of the adaptive resolution scheme (AdResS), with non-interacting tracers as particles reservoir, is combined with a fluctuating hydrodynamics (FHD) solver. The resulting algorithm, supported by a solid mathematical model, allows for a physically consistent exchange of matter and energy between the particle domain and its fluctuating continuum reservoir. Numerical tests are performed to show the validity of the algorithm. Differently from previous algorithms of the same kind, the current approach allows for simulations where, in addition to density fluctuations, also thermal fluctuations can be accounted for, thus large complex molecular systems, as for example hydrated biological membranes in a thermal field, can now be efficiently treated.
△ Less
Submitted 30 October, 2022; v1 submitted 27 October, 2022;
originally announced October 2022.
-
Adaptive Self-supervision Algorithms for Physics-informed Neural Networks
Authors:
Shashank Subramanian,
Robert M. Kirby,
Michael W. Mahoney,
Amir Gholami
Abstract:
Physics-informed neural networks (PINNs) incorporate physical knowledge from the problem domain as a soft constraint on the loss function, but recent work has shown that this can lead to optimization difficulties. Here, we study the impact of the location of the collocation points on the trainability of these models. We find that the vanilla PINN performance can be significantly boosted by adaptin…
▽ More
Physics-informed neural networks (PINNs) incorporate physical knowledge from the problem domain as a soft constraint on the loss function, but recent work has shown that this can lead to optimization difficulties. Here, we study the impact of the location of the collocation points on the trainability of these models. We find that the vanilla PINN performance can be significantly boosted by adapting the location of the collocation points as training proceeds. Specifically, we propose a novel adaptive collocation scheme which progressively allocates more collocation points (without increasing their number) to areas where the model is making higher errors (based on the gradient of the loss function in the domain). This, coupled with a judicious restarting of the training during any optimization stalls (by simply resampling the collocation points in order to adjust the loss landscape) leads to better estimates for the prediction error. We present results for several problems, including a 2D Poisson and diffusion-advection system with different forcing functions. We find that training vanilla PINNs for these problems can result in up to 70% prediction error in the solution, especially in the regime of low collocation points. In contrast, our adaptive schemes can achieve up to an order of magnitude smaller error, with similar computational complexity as the baseline. Furthermore, we find that the adaptive methods consistently perform on-par or slightly better than vanilla PINN method, even for large collocation point regimes. The code for all the experiments has been open sourced.
△ Less
Submitted 8 July, 2022;
originally announced July 2022.
-
Applications and Techniques for Fast Machine Learning in Science
Authors:
Allison McCarn Deiana,
Nhan Tran,
Joshua Agar,
Michaela Blott,
Giuseppe Di Guglielmo,
Javier Duarte,
Philip Harris,
Scott Hauck,
Mia Liu,
Mark S. Neubauer,
Jennifer Ngadiuba,
Seda Ogrenci-Memik,
Maurizio Pierini,
Thea Aarrestad,
Steffen Bahr,
Jurgen Becker,
Anne-Sophie Berthold,
Richard J. Bonventre,
Tomas E. Muller Bravo,
Markus Diefenthaler,
Zhen Dong,
Nick Fritzsche,
Amir Gholami,
Ekaterina Govorkova,
Kyle J Hazelwood
, et al. (62 additional authors not shown)
Abstract:
In this community review report, we discuss applications and techniques for fast machine learning (ML) in science -- the concept of integrating power ML methods into the real-time experimental data processing loop to accelerate scientific discovery. The material for the report builds on two workshops held by the Fast ML for Science community and covers three main areas: applications for fast ML ac…
▽ More
In this community review report, we discuss applications and techniques for fast machine learning (ML) in science -- the concept of integrating power ML methods into the real-time experimental data processing loop to accelerate scientific discovery. The material for the report builds on two workshops held by the Fast ML for Science community and covers three main areas: applications for fast ML across a number of scientific domains; techniques for training and implementing performant and resource-efficient ML algorithms; and computing architectures, platforms, and technologies for deploying these algorithms. We also present overlapping challenges across the multiple scientific domains where common solutions can be found. This community report is intended to give plenty of examples and inspiration for scientific discovery through integrated and accelerated ML solutions. This is followed by a high-level overview and organization of technical advances, including an abundance of pointers to source material, which can enable these breakthroughs.
△ Less
Submitted 25 October, 2021;
originally announced October 2021.
-
Characterizing possible failure modes in physics-informed neural networks
Authors:
Aditi S. Krishnapriyan,
Amir Gholami,
Shandian Zhe,
Robert M. Kirby,
Michael W. Mahoney
Abstract:
Recent work in scientific machine learning has developed so-called physics-informed neural network (PINN) models. The typical approach is to incorporate physical domain knowledge as soft constraints on an empirical loss function and use existing machine learning methodologies to train the model. We demonstrate that, while existing PINN methodologies can learn good models for relatively trivial pro…
▽ More
Recent work in scientific machine learning has developed so-called physics-informed neural network (PINN) models. The typical approach is to incorporate physical domain knowledge as soft constraints on an empirical loss function and use existing machine learning methodologies to train the model. We demonstrate that, while existing PINN methodologies can learn good models for relatively trivial problems, they can easily fail to learn relevant physical phenomena for even slightly more complex problems. In particular, we analyze several distinct situations of widespread physical interest, including learning differential equations with convection, reaction, and diffusion operators. We provide evidence that the soft regularization in PINNs, which involves PDE-based differential operators, can introduce a number of subtle problems, including making the problem more ill-conditioned. Importantly, we show that these possible failure modes are not due to the lack of expressivity in the NN architecture, but that the PINN's setup makes the loss landscape very hard to optimize. We then describe two promising solutions to address these failure modes. The first approach is to use curriculum regularization, where the PINN's loss term starts from a simple PDE regularization, and becomes progressively more complex as the NN gets trained. The second approach is to pose the problem as a sequence-to-sequence learning task, rather than learning to predict the entire space-time at once. Extensive testing shows that we can achieve up to 1-2 orders of magnitude lower error with these methods as compared to regular PINN training.
△ Less
Submitted 11 November, 2021; v1 submitted 2 September, 2021;
originally announced September 2021.
-
Randomized source sketching for full waveform inversion
Authors:
Kamal Aghazade,
Hossein S. Aghamiry,
Ali Gholami,
Stephane Operto
Abstract:
Partial differential equation (PDE) constrained optimization problems such as seismic full waveform inversion (FWI) frequently arise in the geoscience and related fields. For such problems, many observations are usually gathered by multiple sources, which form the right-hand-sides of the PDE constraint. Solving the inverse problem with such massive data sets is computationally demanding, in partic…
▽ More
Partial differential equation (PDE) constrained optimization problems such as seismic full waveform inversion (FWI) frequently arise in the geoscience and related fields. For such problems, many observations are usually gathered by multiple sources, which form the right-hand-sides of the PDE constraint. Solving the inverse problem with such massive data sets is computationally demanding, in particular when dealing with large number of model parameters. This paper proposes a novel randomized source sketching method for the efficient resolution of multisource PDE constrained optimization problems. We first formulate the different source-encoding strategies used in seismic imaging into a unified framework based on a randomized sketching. To this end, the source dimension of the problem is projected in a smaller domain by a suitably defined projection matrix that gathers the physical sources in super-sources through a weighted summation. This reduction in the number of physical sources decreases significantly the number of PDE solves while suitable sparsity-promoting regularization can efficiently mitigate the footprint of the cross-talk noise to maintain the convergence speed of the algorithm. We implement the randomized sketching method in an extended search-space formulation of frequency-domain FWI, which relies on the alternating direction method of multipliers (ADMM). Numerical examples carried out with a series of well documented 2D benchmarks demonstrate that the randomized sketching algorithm reduces the cost of large-scale problems by at least one order of magnitude compared to the original deterministic algorithm.
△ Less
Submitted 9 August, 2021;
originally announced August 2021.
-
Anderson accelerated augmented Lagrangian for extended waveform inversion
Authors:
Kamal Aghazade,
Ali Gholami,
Hossein S Aghamiry,
Stephane Operto
Abstract:
The augmented Lagrangian (AL) method provides a flexible and efficient framework for solving extended-space full-waveform inversion (FWI), a constrained nonlinear optimization problem whereby we seek model parameters and wavefields that minimize the data residuals and satisfy the wave equation constraint. The AL-based wavefield reconstruction inversion, also known as iteratively refined wavefield…
▽ More
The augmented Lagrangian (AL) method provides a flexible and efficient framework for solving extended-space full-waveform inversion (FWI), a constrained nonlinear optimization problem whereby we seek model parameters and wavefields that minimize the data residuals and satisfy the wave equation constraint. The AL-based wavefield reconstruction inversion, also known as iteratively refined wavefield reconstruction inversion, extends the search space of FWI in the source dimension and decreases sensitivity of the inversion to the initial model accuracy. Furthermore, it benefits from the advantages of the alternating direction method of multipliers (ADMM), such as generality and decomposability for dealing with non-differentiable regularizers, e.g., total variation regularization, and large scale problems, respectively. In practice any extension of the method aiming at improving its convergence and decreasing the number of wave-equation solves would have a great importance. To achieve this goal, we recast the method as a general fixed-point iteration problem, which enables us to apply sophisticated acceleration strategies like Anderson acceleration. The accelerated algorithm stores a predefined number of previous iterates and uses their linear combination together with the current iteration to predict the next iteration. We investigate the performance of the proposed accelerated algorithm on a simple checkerboard model and the benchmark Marmousi II and 2004 BP salt models through numerical examples. These numerical results confirm the effectiveness of the proposed algorithm in terms of convergence rate and the quality of the final estimated model.
△ Less
Submitted 26 June, 2021;
originally announced June 2021.
-
Thermodynamic relations at the coupling boundary in adaptive resolution simulations for open systems
Authors:
Abbas Gholami,
Felix Höfling,
Rupert Klein,
Luigi Delle Site
Abstract:
The adaptive resolution simulation (AdResS) technique couples regions with different molecular resolutions and allows the exchange of molecules between different regions in an adaptive fashion. The latest development of the technique allows to abruptly couple the atomistically resolved region with a region of non-interacting point-like particles. The abrupt set-up was derived having in mind the id…
▽ More
The adaptive resolution simulation (AdResS) technique couples regions with different molecular resolutions and allows the exchange of molecules between different regions in an adaptive fashion. The latest development of the technique allows to abruptly couple the atomistically resolved region with a region of non-interacting point-like particles. The abrupt set-up was derived having in mind the idea of the atomistically resolved region as an open system embedded in a large reservoir at a given macroscopic state. In this work, starting from the idea of open system, we derive thermodynamic relations for AdResS which justify conceptually and numerically the claim of AdResS as a technique for simulating open systems. In particular, we derive the relation between the chemical potential of the AdResS set-up and that of its reference fully atomistic simulation. The implication of this result is that the grand potential of AdResS can be explicitly written and thus, from a statistical mechanics point of view, the atomistically resolved region of AdResS can be identified with a well defined open system.
△ Less
Submitted 26 November, 2020;
originally announced November 2020.
-
Spontaneous center formation in Dictyostelium discoideum
Authors:
Estefania Vidal-Henriquez,
Azam Gholami
Abstract:
Dictyostelium discoideum (D.d.) is a widely studied amoeba due to its capabilities of development, survival, and self-organization. During aggregation it produces and relays a chemical signal (cAMP) which shows spirals and target centers. Nevertheless, the natural emergence of these structures is still not well understood. We present a mechanism for creation of centers and target waves of cAMP in…
▽ More
Dictyostelium discoideum (D.d.) is a widely studied amoeba due to its capabilities of development, survival, and self-organization. During aggregation it produces and relays a chemical signal (cAMP) which shows spirals and target centers. Nevertheless, the natural emergence of these structures is still not well understood. We present a mechanism for creation of centers and target waves of cAMP in D.d. by adding cell inhomogeneity to a well known reaction-diffusion model of cAMP waves and we characterize its properties. We show how stable activity centers appear spontaneously in areas of higher cell density with the oscillation frequency of these centers depending on their density. The cAMP waves have the characteristic dispersion relation of trigger waves and a velocity which increases with cell density. Chemotactically competent cells react to these waves and create aggregation streams even with very simple movement rules. Finally we argue in favor of the existence of bounded phosphodiesterase to maintain the wave properties once small cell clusters appear.
△ Less
Submitted 19 December, 2018;
originally announced December 2018.
-
Simulation of glioblastoma growth using a 3D multispecies tumor model with mass effect
Authors:
Shashank Subramanian,
Amir Gholami,
George Biros
Abstract:
In this article, we present a multispecies reaction-advection-diffusion partial differential equation (PDE) coupled with linear elasticity for modeling tumor growth. The model aims to capture the phenomenological features of glioblastoma multiforme observed in magnetic resonance imaging (MRI) scans. These include enhancing and necrotic tumor structures, brain edema and the so called "mass effect",…
▽ More
In this article, we present a multispecies reaction-advection-diffusion partial differential equation (PDE) coupled with linear elasticity for modeling tumor growth. The model aims to capture the phenomenological features of glioblastoma multiforme observed in magnetic resonance imaging (MRI) scans. These include enhancing and necrotic tumor structures, brain edema and the so called "mass effect", that is, the deformation of brain tissue due to the presence of the tumor. The multispecies model accounts for proliferating, invasive and necrotic tumor cells as well as a simple model for nutrition consumption and tumor-induced brain edema. The coupling of the model with linear elasticity equations with variable coefficients allows us to capture the mechanical deformations due to the tumor growth on surrounding tissues. We present the overall formulation along with a novel operator-splitting scheme with components that include linearly-implicit preconditioned elliptic solvers, and semi-Lagrangian method for advection. Also, we present results showing simulated MRI images which highlight the capability of our method to capture the overall structure of glioblastomas in MRIs.
△ Less
Submitted 26 May, 2019; v1 submitted 12 October, 2018;
originally announced October 2018.
-
Spatial heterogeneities shape collective behavior of signaling amoeboid cells
Authors:
Torsten Eckstein,
Estefania Vidal-Henriquez,
Albert Bae,
Azam Gholami
Abstract:
We present novel experimental results on pattern formation of signaling Dictyostelium discoideum amoeba in the presence of a periodic array of millimeter-sized pillars. We observe concentric cAMP waves that initiate almost synchronously at the pillars and propagate outwards. These waves have higher frequency than the other firing centers and dominate the system dynamics. The cells respond chemotac…
▽ More
We present novel experimental results on pattern formation of signaling Dictyostelium discoideum amoeba in the presence of a periodic array of millimeter-sized pillars. We observe concentric cAMP waves that initiate almost synchronously at the pillars and propagate outwards. These waves have higher frequency than the other firing centers and dominate the system dynamics. The cells respond chemotactically to these circular waves and stream towards the pillars, forming periodic Voronoi domains that reflect the periodicity of the underlying lattice. We performed comprehensive numerical simulations of a reaction-diffusion model to study the characteristics of the boundary conditions given by the obstacles. Our simulations show that, the obstacles can act as the wave source depending on the imposed boundary condition. Interestingly, a critical minimum accumulation of cAMP around the obstacles is needed for the pillars to act as the wave source. This critical value is lower at smaller production rates of the intracellular cAMP which can be controlled in our experiments using caffeine. Experiments and simulations also show that in the presence of caffeine the number of firing centers is reduced which is crucial in our system for circular waves emitted from the pillars to successfully take over the dynamics. These results are crucial to understand the signaling mechanism of Dictyostelium cells that experience spatial heterogeneities in its natural habitat.
△ Less
Submitted 18 April, 2018;
originally announced April 2018.
-
Modelling of Dictyostelium Discoideum Movement in Linear Gradient of Chemoattractant
Authors:
Zahra Eidi,
Farshid Mohammad-Rafiee,
Mohammad Khorrami,
Azam Gholami
Abstract:
Chemotaxis is a ubiquitous biological phenomenon in which cells detect a spatial gradient of chemoattractant, and then move towards the source. Here we present a position-dependent advection-diffusion model that quantitatively describes the statistical features of the chemotactic motion of the social amoeba {\it Dictyostelium discoideum} in a linear gradient of cAMP (cyclic adenosine monophosphate…
▽ More
Chemotaxis is a ubiquitous biological phenomenon in which cells detect a spatial gradient of chemoattractant, and then move towards the source. Here we present a position-dependent advection-diffusion model that quantitatively describes the statistical features of the chemotactic motion of the social amoeba {\it Dictyostelium discoideum} in a linear gradient of cAMP (cyclic adenosine monophosphate). We fit the model to experimental trajectories that are recorded in a microfluidic setup with stationary cAMP gradients and extract the diffusion and drift coefficients in the gradient direction. Our analysis shows that for the majority of gradients, both coefficients decrease in time and become negative as the cells crawl up the gradient. The extracted model parameters also show that besides the expected drift in the direction of chemoattractant gradient, we observe a nonlinear dependency of the corresponding variance in time, which can be explained by the model. Furthermore, the results of the model show that the non-linear term in the mean squared displacement of the cell trajectories can dominate the linear term on large time scales.
△ Less
Submitted 5 April, 2018;
originally announced April 2018.
-
Coupling Brain-Tumor Biophysical Models and Diffeomorphic Image Registration
Authors:
Klaudius Scheufele,
Andreas Mang,
Amir Gholami,
Christos Davatzikos,
George Biros,
Miriam Mehl
Abstract:
We present the SIBIA (Scalable Integrated Biophysics-based Image Analysis) framework for joint image registration and biophysical inversion and we apply it to analyse MR images of glioblastomas (primary brain tumors). In particular, we consider the following problem. Given the segmentation of a normal brain MRI and the segmentation of a cancer patient MRI, we wish to determine tumor growth paramet…
▽ More
We present the SIBIA (Scalable Integrated Biophysics-based Image Analysis) framework for joint image registration and biophysical inversion and we apply it to analyse MR images of glioblastomas (primary brain tumors). In particular, we consider the following problem. Given the segmentation of a normal brain MRI and the segmentation of a cancer patient MRI, we wish to determine tumor growth parameters and a registration map so that if we "grow a tumor" (using our tumor model) in the normal segmented image and then register it to the patient segmented image, then the registration mismatch is as small as possible. We call this "the coupled problem" because it two-way couples the biophysical inversion and registration problems. In the image registration step we solve a large-deformation diffeomorphic registration problem parameterized by an Eulerian velocity field. In the biophysical inversion step we estimate parameters in a reaction-diffusion tumor growth model that is formulated as a partial differential equation.
In this paper, our contributions are the introduction of a PDE-constrained optimization formulation of the coupled problem, the derivation of the optimality conditions, and the derivation of a Picard iterative scheme for the solution of the coupled problem. In addition, we perform several tests to experimentally assess the performance of our method on synthetic and clinical datasets. We demonstrate the convergence of the SIBIA optimization solver in different usage scenarios. We demonstrate that we can accurately solve the coupled problem in three dimensions ($256^3$ resolution) in a few minutes using 11 dual-x86 nodes. Also, we demonstrate that, with our coupled approach, we can successfully register normal MRI to tumor-bearing MRI while obtaining Dice coefficients that match those achieved when registering of normal-to-normal MRI.
△ Less
Submitted 2 March, 2018; v1 submitted 15 October, 2017;
originally announced October 2017.
-
Effects of developmental variability on the dynamics and self-organization of cell populations
Authors:
Kaumudi H Prabhakara,
Azam Gholami,
Vladimir S Zykov,
Eberhard Bodenschatz
Abstract:
We report experimental and theoretical results on spatiotemporal pattern formation in cell populations, where the parameters vary in space and time due to mechanisms intrinsic to the system, namely Dictyostelium discoideum (D.d.) in the starvation phase. We find that different patterns are formed when the populations are initialized at different developmental stages, or, when populations at differ…
▽ More
We report experimental and theoretical results on spatiotemporal pattern formation in cell populations, where the parameters vary in space and time due to mechanisms intrinsic to the system, namely Dictyostelium discoideum (D.d.) in the starvation phase. We find that different patterns are formed when the populations are initialized at different developmental stages, or, when populations at different initial developmental stages are mixed. The experimentally observed patterns can be understood with a modified Kessler-Levine model that takes into account the initial spatial heterogeneity of the cell populations and a developmental path introduced by us, i.e., the time dependence of the various biochemical parameters. The dynamics of the parameter agree with known biochemical studies. Most importantly the modified model reproduces not only our results, but also the observations of an independent experiment published earlier. This shows that pattern formation can be used to understand and quantify the temporal evolution of the system parameters.
△ Less
Submitted 26 August, 2017; v1 submitted 31 July, 2017;
originally announced July 2017.
-
An inverse problem formulation for parameter estimation of a reaction diffusion model of low grade gliomas
Authors:
Amir Gholami,
Andreas Mang,
George Biros
Abstract:
We present a numerical scheme for solving a parameter estimation problem for a model of low-grade glioma growth. Our goal is to estimate the spatial distribution of tumor concentration, as well as the magnitude of anisotropic tumor diffusion. We use a constrained optimization formulation with a reaction-diffusion model that results in a system of nonlinear partial differential equations (PDEs). In…
▽ More
We present a numerical scheme for solving a parameter estimation problem for a model of low-grade glioma growth. Our goal is to estimate the spatial distribution of tumor concentration, as well as the magnitude of anisotropic tumor diffusion. We use a constrained optimization formulation with a reaction-diffusion model that results in a system of nonlinear partial differential equations (PDEs). In our formulation, we estimate the parameters using partially observed, noisy tumor concentration data at two different time instances, along with white matter fiber directions derived from diffusion tensor imaging (DTI). The optimization problem is solved with a Gauss-Newton reduced space algorithm. We present the formulation and outline the numerical algorithms for solving the resulting equations. We test the method using a synthetic dataset and compute the reconstruction error for different noise levels and detection thresholds for monofocal and multifocal test cases.
△ Less
Submitted 11 May, 2015; v1 submitted 26 August, 2014;
originally announced August 2014.
