-
Annular Newtonian Poiseuille flow with pressure-dependent wall slip
Authors:
Kostas D. Housiadas,
Evgenios Gryparis,
Georgios C. Georgiou
Abstract:
We investigate the effect of pressure-dependent wall slip on the steady Newtonian annular Poiseuille flow employing Navier's slip law with a slip parameter that varies exponentially with pressure. The dimensionless governing equations and accompanying auxiliary conditions are solved analytically up to second order by implementing a regular perturbation scheme in terms of the small dimensionless pr…
▽ More
We investigate the effect of pressure-dependent wall slip on the steady Newtonian annular Poiseuille flow employing Navier's slip law with a slip parameter that varies exponentially with pressure. The dimensionless governing equations and accompanying auxiliary conditions are solved analytically up to second order by implementing a regular perturbation scheme in terms of the small dimensionless pressure-dependence slip parameter. An explicit formula for the average pressure drop, required to maintain a constant volumetric flowrate, is also derived. This is suitably post-processed by applying a convergence acceleration technique to increase the accuracy of the original perturbation series. The effects of pressure-dependent wall slip are more pronounced when wall slip is weak. However, as the slip coefficient increases, these effects are moderated and eventually eliminated as the perfect slip case is approached. The results show that the average pressure drop remains practically constant until the Reynolds number becomes sufficiently large. It is worth noting that all phenomena associated with pressure-dependent wall slip are amplified as the annular gap is reduced.
△ Less
Submitted 7 September, 2024;
originally announced September 2024.
-
A revisit of the development of viscoplastic flow in pipes and channels
Authors:
Alexandros Syrakos,
Evgenios Gryparis,
Georgios C. Georgiou
Abstract:
This study revisits the development of viscoplastic flow in pipes and channels, focusing on the flow of a Bingham plastic. Using finite element simulations and the Papanastasiou regularisation, results are obtained across a range of Reynolds and Bingham numbers. The novel contributions of this work include: (a) investigating a definition of the development length based on wall shear stress, a crit…
▽ More
This study revisits the development of viscoplastic flow in pipes and channels, focusing on the flow of a Bingham plastic. Using finite element simulations and the Papanastasiou regularisation, results are obtained across a range of Reynolds and Bingham numbers. The novel contributions of this work include: (a) investigating a definition of the development length based on wall shear stress, a critical parameter in numerous applications; (b) considering alternative definitions of the Reynolds number in an effort to collapse the development length curves into a single master curve, independent of the Bingham number; (c) examining the patterns of yielded and unyielded regions within the flow domain; and (d) assessing the impact of the regularisation parameter on the accuracy of the results. The findings enhance the existing literature, providing a more comprehensive understanding of this classic flow problem.
△ Less
Submitted 1 September, 2024;
originally announced September 2024.
-
Torsional parallel plate flow of Herschel-Bulkley fluids with wall slip
Authors:
Evgenios Gryparis,
Georgios C. Georgiou
Abstract:
The effect of wall slip on the apparent flow curves of viscoplastic materials obtained using torsional parallel plate rheometers is analysed by considering Herschel-Bulkley fluids and assuming that slip occurs above a critical wall shear stress, the slip yield stress τ_c, taken to be lower than the yield stress, τ_0. Thus, different flow regimes are encountered as the angular velocity of the exper…
▽ More
The effect of wall slip on the apparent flow curves of viscoplastic materials obtained using torsional parallel plate rheometers is analysed by considering Herschel-Bulkley fluids and assuming that slip occurs above a critical wall shear stress, the slip yield stress τ_c, taken to be lower than the yield stress, τ_0. Thus, different flow regimes are encountered as the angular velocity of the experiment is increased. When the rim shear stress τ_R is below the slip yield stress, the exerted torque is not sufficient to rotate the disk and the material remains still. When τ_c<τ_R<τ_0 the material is still unyielded but exhibits wall slip and rotates as a solid at half the angular velocity of the rotating disk. Finally, when τ_R>τ_0, the material exhibits slip everywhere and yields only in the annulus r_0<r<R, where r_0 is the critical radius at which the shear stress is equal to the yield stress and R is the radius of the disks. In the general case, the slip velocity, which varies with the radial distance, can be calculated numerically and then all quantities of interest, such as the true shear rate, and the two branches of the apparent flow curve can be computed by means of closed form expressions. Analytical solutions have also been obtained for certain values of the power-law exponent. In order to illustrate the effect of wall slip on the apparent flow curve and on the torque, results have been obtained for different gap sizes between the disks choosing the values of the rheological and slip parameters to be similar to reported values for certain colloidal suspensions. The computed apparent flow curves reproduce the patterns observed in the experiments.
△ Less
Submitted 16 March, 2024;
originally announced March 2024.
-
Numerical solution of the Newtonian plane Couette flow with linear dynamic wall slip
Authors:
Muner M. A. Hasan,
Ethar A. A. Ahmed,
Ahmed F. Ghaleb,
Moustafa S. Abou-Dina,
Georgios C. Georgiou
Abstract:
An efficient numerical approach based on weighted average finite differences is used to solve the Newtonian plane Couette flow with wall slip, obeying a dynamic slip law that generalizes the Navier slip law with the inclusion of a relaxation term. Slip is exhibited only along the fixed plate, and the motion is triggered by the motion of the other plate. Three different cases are considered for the…
▽ More
An efficient numerical approach based on weighted average finite differences is used to solve the Newtonian plane Couette flow with wall slip, obeying a dynamic slip law that generalizes the Navier slip law with the inclusion of a relaxation term. Slip is exhibited only along the fixed plate, and the motion is triggered by the motion of the other plate. Three different cases are considered for the motion of the moving plate, i.e., constant speed, oscillating speed, and a single-period sinusoidal speed. The velocity and the volumetric flow rate are calculated in all cases and comparisons are made with the results of other methods and available results in the literature. The numerical outcomes confirm the damping with time and the lagging effects arising from the Navier and dynamic wall slip conditions and demonstrate the hysteretic behavior of the slip velocity in following the harmonic boundary motion.
△ Less
Submitted 8 February, 2024;
originally announced February 2024.
-
Analytical solution of the Poiseuille flow of a De Kee viscoplastic fluid
Authors:
Alexandros Syrakos,
Aggelos Charalambous,
Georgios C. Georgiou
Abstract:
We provide an explicit analytical solution of the planar Poiseuille flow of a viscoplastic fluid governed by the constitutive equation proposed by De Kee and Turcotte (Chem. Eng. Commun. 6 (1980) 273-282). Formulae for the velocity and the flow rate are derived, making use of the Lambert W function. It is shown that a solution does not always exist because the flow curve is bounded from above and…
▽ More
We provide an explicit analytical solution of the planar Poiseuille flow of a viscoplastic fluid governed by the constitutive equation proposed by De Kee and Turcotte (Chem. Eng. Commun. 6 (1980) 273-282). Formulae for the velocity and the flow rate are derived, making use of the Lambert W function. It is shown that a solution does not always exist because the flow curve is bounded from above and hence the rheological model can accommodate stresses only up to a certain limit. In fact, the flow curve reaches a peak at a critical shear rate, beyond which it exhibits a negative slope, giving rise to unstable solutions.
△ Less
Submitted 5 January, 2024;
originally announced January 2024.
-
Rheological characterization of a thixotropic semisolid slurry by means of numerical simulations of squeeze flow experiments
Authors:
Georgios C. Florides,
Georgios C. Georgiou,
Michael Modigell,
Eugenio José Zoqui
Abstract:
We propose a methodology for the rheological characterization of a semisolid metal slurry using experimental squeeze flow data. The slurry is modeled as a structural thixotropic viscoplastic material, obeying the regularized Herschel-Bulkley constitutive equation. All rheological parameters are assumed to vary with the structure parameter that is governed by a first-order kinetics accounting for t…
▽ More
We propose a methodology for the rheological characterization of a semisolid metal slurry using experimental squeeze flow data. The slurry is modeled as a structural thixotropic viscoplastic material, obeying the regularized Herschel-Bulkley constitutive equation. All rheological parameters are assumed to vary with the structure parameter that is governed by a first-order kinetics accounting for the material structure breakdown and build-up. The squeeze flow is simulated using finite elements in a Lagrangian framework. The evolution of the sample height has been studied for wide ranges of the Bingham and Reynolds numbers, the power-law exponent as well as the kinetics parameters of the structure parameter. Systematic comparisons have been carried out with available experimental data on a semisolid aluminium alloy (A356), where the sample is compressed from its topside under a specified strain of 80% at a temperature of 582 oC while the bottom side remains fixed. Excellent agreement with the experimental data could be achieved provided that at the initial instances (up to 0.01s) of the experiment the applied load is much higher than the nominal experimental load and that the yield stress and the power-law exponent vary linearly with the structure parameter. The first assumption implies that a different model, such as an elastoviscoplastic one, needs to be employed during the initial stages of the experiment. As for the second one, the evolution of the sample height can be reproduced allowing the yield stress to vary from 0 (no structure) to a maximum nominal value (full structure) and the power-law exponent from 0.2 to 1.4, i.e., from the shear-thinning to the shear-thickening regime. These variations are consistent with the internal microstructure variation pattern known to be exhibited by semisolid slurries.
△ Less
Submitted 30 December, 2023;
originally announced January 2024.
-
Efficient 3-dimensional photonic-plasmonic photo-conductive switches for picosecond THz pulses
Authors:
Giorgos Georgiou,
Clément Geffroy,
Christopher Bäuerle,
Jean-François Roux
Abstract:
The efficiency of photo-conductive switches, which continue to be used for the generation and detection of THz waves, has been overlooked for a long time. The so far 'optics-dominated' devices are making their way through to new and emerging fields of research that require ultrafast picosecond voltage pulses, as well as to new applications where power efficiency is of uttermost importance. To addr…
▽ More
The efficiency of photo-conductive switches, which continue to be used for the generation and detection of THz waves, has been overlooked for a long time. The so far 'optics-dominated' devices are making their way through to new and emerging fields of research that require ultrafast picosecond voltage pulses, as well as to new applications where power efficiency is of uttermost importance. To address the efficiency problems, in this article we present a novel photo-conductive switch that is based on a 3-dimensional design. In contrast to conventional planar designs, our photo-conductive switch drastically enhances the overall efficiency by maximising the laser absorption within the device, while at the same time optimising the carrier collection efficiency at the electrodes. To maximise the optical absorption we take advantage of photonic and plasmonic modes that are excited in our device due to a periodic array of nanopillars, whereas the collection efficiency is optimised by converting each nanopillar into a single nano-photo-conductive switch. Our numerical calculations show a 50-fold increase in the overall generated current and a 5-fold bandwidth increase compared to traditional interdigitated planar photo-conductive switches. This opens up a wealth of new possibilities in quantum science and technology where efficient low power devices are indispensable.
△ Less
Submitted 9 November, 2020; v1 submitted 5 January, 2020;
originally announced January 2020.
-
Thixotropic flow past a cylinder
Authors:
Alexandros Syrakos,
Georgios C. Georgiou,
Andreas N. Alexandrou
Abstract:
We study the flow of a thixotropic fluid around a cylinder. The rheology of the fluid is described by means of a structural viscoplastic model based on the Bingham constitutive equation, regularised using the Papanastasiou regularisation. The yield stress is assumed to vary linearly with the structural parameter, which varies from zero (completely broken structure) to one (fully developed skeleton…
▽ More
We study the flow of a thixotropic fluid around a cylinder. The rheology of the fluid is described by means of a structural viscoplastic model based on the Bingham constitutive equation, regularised using the Papanastasiou regularisation. The yield stress is assumed to vary linearly with the structural parameter, which varies from zero (completely broken structure) to one (fully developed skeleton structure), following a first-order rate equation which accounts for material structure break-down and build-up. The results were obtained numerically using the Finite Element Method. Simulations were performed for a moderate Reynolds number of 45, so that flow recirculation is observed behind the cylinder, but vortex shedding does not occur. The effects of the Bingham number and of the thixotropy parameters are studied. The results show that the viscous character of the flow can be controlled within certain limits through these parameters, despite the fact that the Reynolds number is fixed.
△ Less
Submitted 21 October, 2017;
originally announced October 2017.
-
Viscoplastic flow in an extrusion damper
Authors:
Alexandros Syrakos,
Yannis Dimakopoulos,
Georgios C. Georgiou,
John Tsamopoulos
Abstract:
Numerical simulations of the flow in an extrusion damper are performed using a finite volume method. The damper is assumed to consist of a shaft, with or without a spherical bulge, oscillating axially in a containing cylinder filled with a viscoplastic material of Bingham type. The response of the damper to a forced sinusoidal displacement is studied. In the bulgeless case the configuration is the…
▽ More
Numerical simulations of the flow in an extrusion damper are performed using a finite volume method. The damper is assumed to consist of a shaft, with or without a spherical bulge, oscillating axially in a containing cylinder filled with a viscoplastic material of Bingham type. The response of the damper to a forced sinusoidal displacement is studied. In the bulgeless case the configuration is the annular analogue of the well-known lid-driven cavity problem, but with a sinusoidal rather than constant lid velocity. Navier slip is applied to the shaft surface in order to bound the reaction force to finite values. Starting from a base case, several problem parameters are varied in turn in order to study the effects of viscoplasticity, slip, damper geometry and oscillation frequency to the damper response. The results show that, compared to Newtonian flow, viscoplasticity causes the damper force to be less sensitive to the shaft velocity; this is often a desirable damper property. The bulge increases the required force on the damper mainly by generating a pressure difference across itself; the latter is larger the smaller the gap between the bulge and the casing is. At high yield stresses or slip coefficients the amount of energy dissipation that occurs due to sliding friction at the shaft-fluid interface is seen to increase significantly. At low frequencies the flow is in quasi steady state, dominated by viscoplastic forces, while at higher frequencies the fluid kinetic energy storage and release also come into the energy balance, introducing hysteresis effects.
△ Less
Submitted 4 May, 2016;
originally announced May 2016.
-
Performance of the finite volume method in solving regularised Bingham flows: inertia effects in the lid-driven cavity flow
Authors:
Alexandros Syrakos,
Georgios C. Georgiou,
Andreas N. Alexandrou
Abstract:
We extend our recent work on the creeping flow of a Bingham fluid in a lid-driven cavity, to the study of inertial effects, using a finite volume method and the Papanastasiou regularisation of the Bingham constitutive model [J. Rheology 31 (1987) 385-404]. The finite volume method used belongs to a very popular class of methods for solving Newtonian flow problems, which use the SIMPLE algorithm to…
▽ More
We extend our recent work on the creeping flow of a Bingham fluid in a lid-driven cavity, to the study of inertial effects, using a finite volume method and the Papanastasiou regularisation of the Bingham constitutive model [J. Rheology 31 (1987) 385-404]. The finite volume method used belongs to a very popular class of methods for solving Newtonian flow problems, which use the SIMPLE algorithm to solve the discretised set of equations, and have matured over the years. By regularising the Bingham constitutive equation it is easy to extend such a solver to Bingham flows since all that this requires is to modify the viscosity function. This is a tempting approach, since it requires minimum programming effort and makes available all the existing features of the mature finite volume solver. On the other hand, regularisation introduces a parameter which controls the error in addition to the grid spacing, and makes it difficult to locate the yield surfaces. Furthermore, the equations become stiffer and more difficult to solve, while the discontinuity at the yield surfaces causes large truncation errors. The present work attempts to investigate the strengths and weaknesses of such a method by applying it to the lid-driven cavity problem for a range of Bingham and Reynolds numbers (up to 100 and 5000 respectively). By employing techniques such as multigrid, local grid refinement, and an extrapolation procedure to reduce the effect of the regularisation parameter on the calculation of the yield surfaces (Liu et al. J. Non-Newtonian Fluid Mech. 102 (2002) 179-191), satisfactory results are obtained, although the weaknesses of the method become more noticeable as the Bingham number is increased.
△ Less
Submitted 2 May, 2016;
originally announced May 2016.
-
Solution of the square lid-driven cavity flow of a Bingham plastic using the finite volume method
Authors:
Alexandros Syrakos,
Georgios C. Georgiou,
Andreas N. Alexandrou
Abstract:
We investigate the performance of the finite volume method in solving viscoplastic flows. The creeping square lid-driven cavity flow of a Bingham plastic is chosen as the test case and the constitutive equation is regularised as proposed by Papanastasiou [J. Rheol. 31 (1987) 385-404]. It is shown that the convergence rate of the standard SIMPLE pressure-correction algorithm, which is used to solve…
▽ More
We investigate the performance of the finite volume method in solving viscoplastic flows. The creeping square lid-driven cavity flow of a Bingham plastic is chosen as the test case and the constitutive equation is regularised as proposed by Papanastasiou [J. Rheol. 31 (1987) 385-404]. It is shown that the convergence rate of the standard SIMPLE pressure-correction algorithm, which is used to solve the algebraic equation system that is produced by the finite volume discretisation, severely deteriorates as the Bingham number increases, with a corresponding increase in the non-linearity of the equations. It is shown that using the SIMPLE algorithm in a multigrid context dramatically improves convergence, although the multigrid convergence rates are much worse than for Newtonian flows. The numerical results obtained for Bingham numbers as high as 1000 compare favourably with reported results of other methods.
△ Less
Submitted 28 April, 2016;
originally announced April 2016.
-
Photo-generated THz antennas: All-optical control of plasmonic materials
Authors:
Giorgos Georgiou,
Hemant K. Tyagi,
Peter Mulder,
Gerard J. Bauhuis,
John J. Schermer,
Jaime Gómez Rivas
Abstract:
Localized surface plasmon polaritons in conducting structures give rise to enhancements of electromagnetic local fields and extinction efficiencies. Resonant conducting structures are conventionally fabricated with a fixed geometry that determines their plasmonic response. Here, we challenge this conventional approach by demonstrating the photo-generation of plasmonic materials (THz plasmonic ante…
▽ More
Localized surface plasmon polaritons in conducting structures give rise to enhancements of electromagnetic local fields and extinction efficiencies. Resonant conducting structures are conventionally fabricated with a fixed geometry that determines their plasmonic response. Here, we challenge this conventional approach by demonstrating the photo-generation of plasmonic materials (THz plasmonic antennas) on a flat semiconductor layer by the structured optical illumination through a spatial light modulator. Free charge carriers are photo-excited only on selected areas, which enables the definition of different plasmonic antennas on the same sample by simply changing the illumination pattern, thus without the need of physically structuring the sample. These results open a wide range of possibilities for an all-optical spatial and temporal control of resonances on plasmonic surfaces and the concomitant control of THz extinction and local field enhancements.
△ Less
Submitted 27 September, 2013;
originally announced September 2013.
