-
Fill and dump measurement of the neutron lifetime using an asymmetric magneto-gravitational trap
Authors:
C. Cude-Woods,
F. M. Gonzalez,
E. M. Fries,
T. Bailey,
M. Blatnik,
N. B. Callahan,
J. H. Choi,
S. M. Clayton,
S. A. Currie,
M. Dawid,
B. W. Filippone,
W. Fox,
P. Geltenbort,
E. George,
L. Hayen,
K. P. Hickerson,
M. A. Hoffbauer,
K. Hoffman,
A. T. Holley,
T. M. Ito,
A. Komives,
C. -Y. Liu,
M. Makela,
C. L. Morris,
R. Musedinovic
, et al. (17 additional authors not shown)
Abstract:
The past two decades have yielded several new measurements and reanalyses of older measurements of the neutron lifetime. These have led to a 4.4 standard deviation discrepancy between the most precise measurements of the neutron decay rate producing protons in cold neutron beams and the lifetime measured in neutron storage experiments. Measurements using different techniques are important for inve…
▽ More
The past two decades have yielded several new measurements and reanalyses of older measurements of the neutron lifetime. These have led to a 4.4 standard deviation discrepancy between the most precise measurements of the neutron decay rate producing protons in cold neutron beams and the lifetime measured in neutron storage experiments. Measurements using different techniques are important for investigating whether there are unidentified systematic effects in any of the measurements. In this paper we report a new measurement using the Los Alamos asymmetric magneto-gravitational trap where the surviving neutrons are counted external to the trap using the fill and dump method. The new measurement gives a free neutron lifetime of . Although this measurement is not as precise, it is in statistical agreement with previous results using in situ counting in the same apparatus.
△ Less
Submitted 4 May, 2022;
originally announced May 2022.
-
Exceptional fracture toughness of CrCoNi-based medium- and high-entropy alloys close to liquid helium temperatures
Authors:
Dong Liu,
Qin Yu,
Saurabh Kabra,
Ming Jiang,
Paul Forna-Kreutzer,
Ruopeng Zhang,
Madelyn Payne,
Flynn Walsh,
Bernd Gludovatz,
Mark Asta,
Andrew M. Minor,
Easo P. George,
Robert O. Ritchie
Abstract:
Medium- and high-entropy alloys based on the CrCoNi-system have been shown to display outstanding strength, tensile ductility and fracture toughness (damage-tolerance properties), especially at cryogenic temperatures. Here we examine the JIc and (back-calculated) KJIc fracture toughness values of the face-centered cubic, equiatomic CrCoNi and CrMnFeCoNi alloys at 20 K. At flow stress values of ~1.…
▽ More
Medium- and high-entropy alloys based on the CrCoNi-system have been shown to display outstanding strength, tensile ductility and fracture toughness (damage-tolerance properties), especially at cryogenic temperatures. Here we examine the JIc and (back-calculated) KJIc fracture toughness values of the face-centered cubic, equiatomic CrCoNi and CrMnFeCoNi alloys at 20 K. At flow stress values of ~1.5 GPa, crack-initiation KJIc toughnesses were found to be exceptionally high, respectively 235 and 415 MPa(square-root)m for CrMnFeCoNi and CrCoNi, with the latter displaying a crack-growth toughness Kss exceeding 540 MPa(square-root)m after 2.25 mm of stable cracking, which to our knowledge is the highest such value ever reported. Characterization of the crack-tip regions in CrCoNi by scanning electron and transmission electron microscopy reveal deformation structures at 20 K that are quite distinct from those at higher temperatures and involve heterogeneous nucleation, but restricted growth, of stacking faults and fine nano-twins, together with transformation to the hexagonal closed-packed phase. The coherent interfaces of these features can promote both the arrest and transmission of dislocations to generate respectively strength and ductility which strongly contributes to sustained strain hardening. Indeed, we believe that these nominally single-phase, concentrated solid-solution alloys develop their fracture resistance through a progressive synergy of deformation mechanisms, including dislocation glide, stacking-fault formation, nano-twinning and eventually in situ phase transformation, all of which serve to extend continuous strain hardening which simultaneously elevates strength and ductility (by delaying plastic instability), leading to truly exceptional resistance to fracture.
△ Less
Submitted 4 April, 2022;
originally announced April 2022.
-
Performance advantages of buffered mode operation of HxRG near infrared detectors
Authors:
Naidu Bezawada,
Derek Ives,
Domingo Alvarez,
Benoît Serra,
Elizabeth George,
Christopher Mandla,
Leander Mehrgan
Abstract:
The Teledyne HxRG detectors have versatile and programmable output options to allow operation of them in a variety of configurations such as slow unbuffered, slow buffered, fast buffered or unbuffered modes to optimise the detector performance for a given application. Normally at ESO, for low noise operation, the detectors are operated in slow unbuffered mode. Whilst the slow unbuffered mode offer…
▽ More
The Teledyne HxRG detectors have versatile and programmable output options to allow operation of them in a variety of configurations such as slow unbuffered, slow buffered, fast buffered or unbuffered modes to optimise the detector performance for a given application. Normally at ESO, for low noise operation, the detectors are operated in slow unbuffered mode. Whilst the slow unbuffered mode offers a simple interface to the external preamplifier electronics, the detector operation in this mode can suffer from reduced pixel frequency response and higher electrical crosstalk between the readout channels. In the context of the detector systems required for the first generation instruments of the ELT (MICADO, HARMONI and METIS), an exercise was undertaken to evaluate the noise, speed and crosstalk performance of the detectors in the slow buffered mode. A test preamplifier has been designed with options to operate a H2RG detector in buffered or unbuffered and with or without using the reference output, so a direct performance comparison can be made between different modes. This paper presents the performance advantages such as increased pixel frequency response, elimination of electrical crosstalk between the readout channels and the noise performance in the buffered mode operation. These improvements allow us to achieve the same frame readout time using half the detector cryogenic electronics and detector controller electronics for the ELT instruments, which significantly reduces the associated cryomechanical complexities in the instrument.
△ Less
Submitted 15 December, 2020;
originally announced December 2020.
-
Characterisation, performance, and operational aspects of the H4RG-15 near infrared detectors for the MOONS instrument
Authors:
Derek Ives,
Domingo Alvarez,
Naidu Bezawada,
Elizabeth George,
Benoît Serra
Abstract:
MOONS is a multi-object spectrograph for the ESO VLT covering a simultaneous wavelength range of 0.6-1.8 microns using approximately 1000 fibres. It uses four Teledyne Imaging Systems H4RG-15 4K x 4K detectors with 2.5 $μ$m cut-off material for the two longer wavebands (YJ and H). Since the spectrographs utilize an extremely fast modified Schmidt camera design, then the detectors are situated in t…
▽ More
MOONS is a multi-object spectrograph for the ESO VLT covering a simultaneous wavelength range of 0.6-1.8 microns using approximately 1000 fibres. It uses four Teledyne Imaging Systems H4RG-15 4K x 4K detectors with 2.5 $μ$m cut-off material for the two longer wavebands (YJ and H). Since the spectrographs utilize an extremely fast modified Schmidt camera design, then the detectors are situated in the optical beam and hence required the development of a novel 64- channel cryogenic differential cryogenic preamplifier, minimized for optical footprint which will be reported on. We have operated the Engineering Grade H4RG detector at a range of temperatures from 90K to 40K and we will report on the advantages of the lower operational temperature. We have completed a full persistence analysis and are able to model it reasonably well and will offer a correction for it in our data pipeline. We have also configured the detector for use with both unbuffered and buffered outputs and report on the differences in performance between the two output types. We have also seen some programming issues with the detector type and will report on our work-around for this, we will also describe the use of the column-deselect feature and row skipping to minimize the effects of PEDs. We have also measured charge injection per read and report on this, likewise we have also measured the inter-pixel capacitance in different regions of the detector. We will present all these results together with a summary of the complete performance characteristics of this detector family.
△ Less
Submitted 15 December, 2020;
originally announced December 2020.
-
Detector Systems Engineering for Extremely Large Instruments
Authors:
Elizabeth M. George,
Naidu Bezawada,
Derek Ives,
Leander Mehrgan,
Matteo Accardo,
Domingo Alvarez,
Martin Brinkmann,
Ralf Conzelmann,
Claudio Cumani,
Mark Downing,
Max Engelhardt,
Marcus Haug,
Joshua Hopgood,
Christoph Geimer,
Olaf Iwert,
Barbara Klein,
Christopher Mandla,
Eric Müller,
Suzanne Ramsay,
Javier Reyes,
Mathias Richerzhagen,
Benoît Serra,
Matthias Seidel,
Jörg Stegmeier,
Mirko Todorovic
Abstract:
The scientific detector systems for the ESO ELT first-light instruments, HARMONI, MICADO, and METIS, together will require 27 science detectors: seventeen 2.5 $μ$m cutoff H4RG-15 detectors, four 4K x 4K 231-84 CCDs, five 5.3 $μ$m cutoff H2RG detectors, and one 13.5 $μ$m cutoff GEOSNAP detector. This challenging program of scientific detector system development covers everything from designing and…
▽ More
The scientific detector systems for the ESO ELT first-light instruments, HARMONI, MICADO, and METIS, together will require 27 science detectors: seventeen 2.5 $μ$m cutoff H4RG-15 detectors, four 4K x 4K 231-84 CCDs, five 5.3 $μ$m cutoff H2RG detectors, and one 13.5 $μ$m cutoff GEOSNAP detector. This challenging program of scientific detector system development covers everything from designing and producing state-of-the-art detector control and readout electronics, to developing new detector characterization techniques in the lab, to performance modeling and final system verification. We report briefly on the current design of these detector systems and developments underway to meet the challenging scientific performance goals of the ELT instruments.
△ Less
Submitted 15 December, 2020;
originally announced December 2020.
-
Simulations and Design of a Single-Photon CMOS Imaging Pixel Using Multiple Non-Destructive Signal Sampling
Authors:
Konstantin D. Stefanov,
Martin Prest,
Mark Downing,
Elizabeth George,
Naidu Bezawada,
Andrew D. Holland
Abstract:
A single-photon CMOS image sensor design based on pinned photodiode (PPD) with multiple charge transfers and sampling is described. In the proposed pixel architecture, the photogenerated signal is sampled non-destructively multiple times and the results are averaged. Each signal measurement is statistically independent and by averaging the electronic readout noise is reduced to a level where singl…
▽ More
A single-photon CMOS image sensor design based on pinned photodiode (PPD) with multiple charge transfers and sampling is described. In the proposed pixel architecture, the photogenerated signal is sampled non-destructively multiple times and the results are averaged. Each signal measurement is statistically independent and by averaging the electronic readout noise is reduced to a level where single photons can be distinguished reliably. A pixel design using this method has been simulated in TCAD and several layouts have been generated for a 180 nm CMOS image sensor process. Using simulations, the noise performance of the pixel has been determined as a function of the number of samples, sense node capacitance, sampling rate, and transistor characteristics. The strengths and the limitations of the proposed design are discussed in detail, including the trade-off between noise performance and readout rate and the impact of charge transfer inefficiency. The projected performance of our first prototype device indicates that single-photon imaging is within reach and could enable ground-breaking performance in many scientific and industrial imaging applications.
△ Less
Submitted 6 April, 2020;
originally announced April 2020.
-
Predictive model of persistence in H2RG detectors
Authors:
Simon Tulloch,
Elizabeth George
Abstract:
Infrared hybridized detectors are widely used in astronomy, and their performance can be degraded by image persistence. This results in remnant images that can persist in the detector for many hours, contaminating any subsequent low-background observations. A different but related problem is reciprocity failure whereby the detector is less sensitive to low flux observations. It is demonstrated tha…
▽ More
Infrared hybridized detectors are widely used in astronomy, and their performance can be degraded by image persistence. This results in remnant images that can persist in the detector for many hours, contaminating any subsequent low-background observations. A different but related problem is reciprocity failure whereby the detector is less sensitive to low flux observations. It is demonstrated that both of these problems can be explained by trapping and detrapping currents that move charge back and forward across the depletion region boundary of the photodiodes within each pixel. These traps have been characterized in one 2.5 $μ$m and two 5.3 $μ$m cutoff wavelength Teledyne H2RG detectors. We have developed a behaviour model of these traps using a 5-pole Infinite Impulse Response digital filter. This model allows the trapped charge in a detector to be constantly calculated for arbitrary exposure histories, providing a near real-time correction for image persistence.
△ Less
Submitted 18 August, 2019;
originally announced August 2019.
-
A boron-coated CCD camera for direct detection of Ultracold Neutrons (UCN)
Authors:
K. Kuk,
C. Cude-Woods,
C. R. Chavez,
J. H. Choi,
J. Estrada,
M. Hoffbauer,
M. Makela,
P. Merkel,
C. L. Morris,
E. Ramberg,
Z. Wang,
T. Bailey,
M. Blatnik,
E. R. Adamek,
L. J. Broussard,
M. A. -P. Brown,
N. B. Callahan,
S. M. Clayton,
S. A. Currie,
X. Ding,
D. Dinger,
B. Filippone,
E. M. Fries,
P. Geltenbort,
E. George
, et al. (26 additional authors not shown)
Abstract:
A new boron-coated CCD camera is described for direct detection of ultracold neutrons (UCN) through the capture reactions $^{10}$B (n,$α$0$γ$)$^7$Li (6%) and $^{10}$B(n,$α$1$γ$)$^7$Li (94%). The experiments, which extend earlier works using a boron-coated ZnS:Ag scintillator, are based on direct detections of the neutron-capture byproducts in silicon. The high position resolution, energy resolutio…
▽ More
A new boron-coated CCD camera is described for direct detection of ultracold neutrons (UCN) through the capture reactions $^{10}$B (n,$α$0$γ$)$^7$Li (6%) and $^{10}$B(n,$α$1$γ$)$^7$Li (94%). The experiments, which extend earlier works using a boron-coated ZnS:Ag scintillator, are based on direct detections of the neutron-capture byproducts in silicon. The high position resolution, energy resolution and particle ID performance of a scientific CCD allows for observation and identification of all the byproducts $α$, $^7$Li and $γ$ (electron recoils). A signal-to-noise improvement on the order of 10$^4$ over the indirect method has been achieved. Sub-pixel position resolution of a few microns is demonstrated. The technology can also be used to build UCN detectors with an area on the order of 1 m$^2$. The combination of micrometer scale spatial resolution, few electrons ionization thresholds and large area paves the way to new research avenues including quantum physics of UCN and high-resolution neutron imaging and spectroscopy.
△ Less
Submitted 28 February, 2019;
originally announced March 2019.
-
Fast method of crosstalk characterization for HxRG detectors
Authors:
Elizabeth M. George,
Simon M. Tulloch,
Derek J. Ives
Abstract:
HxRG detectors have crosstalk between amplifier channels at a scientifically relevant level. In principle, crosstalk signals can be fully calibrated and removed from data, but only if a full crosstalk matrix is measured for the detector. We present a fast method of crosstalk characterization that can be performed with most instrument calibration units; it requires only a flat-field illumination an…
▽ More
HxRG detectors have crosstalk between amplifier channels at a scientifically relevant level. In principle, crosstalk signals can be fully calibrated and removed from data, but only if a full crosstalk matrix is measured for the detector. We present a fast method of crosstalk characterization that can be performed with most instrument calibration units; it requires only a flat-field illumination and window programming in the HxRG detectors. We show the crosstalk matrices obtained with this method for both fast and slow mode in an H2RG detector, and give examples of how this data can be used to tune detector operation parameters, feed back into the electronics design for the cryogenic pre-amplifiers, and be used in the data pipeline to remove crosstalk signal from scientific data.
△ Less
Submitted 15 November, 2019; v1 submitted 2 August, 2018;
originally announced August 2018.
-
The Astropy Problem
Authors:
Demitri Muna,
Michael Alexander,
Alice Allen,
Richard Ashley,
Daniel Asmus,
Ruyman Azzollini,
Michele Bannister,
Rachael Beaton,
Andrew Benson,
G. Bruce Berriman,
Maciej Bilicki,
Peter Boyce,
Joanna Bridge,
Jan Cami,
Eryn Cangi,
Xian Chen,
Nicholas Christiny,
Christopher Clark,
Michelle Collins,
Johan Comparat,
Neil Cook,
Darren Croton,
Isak Delberth Davids,
Éric Depagne,
John Donor
, et al. (129 additional authors not shown)
Abstract:
The Astropy Project (http://astropy.org) is, in its own words, "a community effort to develop a single core package for Astronomy in Python and foster interoperability between Python astronomy packages." For five years this project has been managed, written, and operated as a grassroots, self-organized, almost entirely volunteer effort while the software is used by the majority of the astronomical…
▽ More
The Astropy Project (http://astropy.org) is, in its own words, "a community effort to develop a single core package for Astronomy in Python and foster interoperability between Python astronomy packages." For five years this project has been managed, written, and operated as a grassroots, self-organized, almost entirely volunteer effort while the software is used by the majority of the astronomical community. Despite this, the project has always been and remains to this day effectively unfunded. Further, contributors receive little or no formal recognition for creating and supporting what is now critical software. This paper explores the problem in detail, outlines possible solutions to correct this, and presents a few suggestions on how to address the sustainability of general purpose astronomical software.
△ Less
Submitted 10 October, 2016;
originally announced October 2016.
-
Measurement of the Shape Factor for the Beta Decay of $^{14}$O
Authors:
E. A. George,
P. A. Voytas,
G. W. Severin,
L. D. Knutson
Abstract:
We report results from an experiment designed to test the conserved vector current (CVC) hypothesis by measuring the shape of the $β$-decay spectrum for the allowed $0^+\rightarrow 1^+$ ground state decay of $^{14}$O. Measurements of the spectrum intensity were obtained with a superconducting beta spectrometer and will be reported for positron kinetic energies ranging from 1.9 to 4.0 MeV. After di…
▽ More
We report results from an experiment designed to test the conserved vector current (CVC) hypothesis by measuring the shape of the $β$-decay spectrum for the allowed $0^+\rightarrow 1^+$ ground state decay of $^{14}$O. Measurements of the spectrum intensity were obtained with a superconducting beta spectrometer and will be reported for positron kinetic energies ranging from 1.9 to 4.0 MeV. After dividing out phase space, Coulomb, and other correction factors, the resulting shape function has a negative slope of several per cent per MeV. We define a parameter $a'$, which is essentially a measure of the average slope of the shape function over the energy range of the measurements, and determine its value to be $a' = -0.0290 \pm 0.0008$ (stat.) $\pm 0.0006$ (syst.). The measured slope parameter is in good agreement with predictions from shell model calculations that respect CVC.
△ Less
Submitted 27 October, 2014;
originally announced October 2014.
-
A Study of Al-Mn Transition Edge Sensor Engineering for Stability
Authors:
E. M. George,
J. E. Austermann,
J. A. Beall,
D. Becker,
B. A. Benson,
L. E. Bleem,
J. E. Carlstrom,
C. L. Chang,
H- M. Cho,
A. T. Crites,
M. A. Dobbs,
W. Everett,
N. W. Halverson,
J. W. Henning,
G. C. Hilton,
W. L. Holzapfel,
J. Hubmayr,
K. D. Irwin,
D. Li,
M. Lueker,
J. J. McMahon,
J. Mehl,
J. Montgomery,
T. Natoli,
J. P. Nibarger
, et al. (10 additional authors not shown)
Abstract:
The stability of Al-Mn transition edge sensor (TES) bolometers is studied as we vary the engineered TES transition, heat capacity, and/or coupling between the heat capacity and TES. We present thermal structure measurements of each of the 39 designs tested. The data is accurately fit by a two-body bolometer model, which allows us to extract the basic TES parameters that affect device stability. We…
▽ More
The stability of Al-Mn transition edge sensor (TES) bolometers is studied as we vary the engineered TES transition, heat capacity, and/or coupling between the heat capacity and TES. We present thermal structure measurements of each of the 39 designs tested. The data is accurately fit by a two-body bolometer model, which allows us to extract the basic TES parameters that affect device stability. We conclude that parameters affecting device stability can be engineered for optimal device operation, and present the model parameters extracted for the different TES designs.
△ Less
Submitted 10 November, 2013;
originally announced November 2013.
-
Frequency Multiplexed SQUID Readout of Large Bolometer Arrays for Cosmic Microwave Background Measurements
Authors:
M. A. Dobbs,
M. Lueker,
K. A. Aird,
A. N. Bender,
B. A. Benson,
L. E. Bleem,
J. E. Carlstrom,
C. L. Chang,
H. -M. Cho,
J. Clarke,
T. M. Crawford,
A. T. Crites,
D. I. Flanigan,
T. de Haan,
E. M. George,
N. W. Halverson,
W. L. Holzapfel,
J. D. Hrubes,
B. R. Johnson,
J. Joseph,
R. Keisler,
J. Kennedy,
Z. Kermish,
T. M. Lanting,
A. T. Lee
, et al. (22 additional authors not shown)
Abstract:
A technological milestone for experiments employing Transition Edge Sensor (TES) bolometers operating at sub-kelvin temperature is the deployment of detector arrays with 100s--1000s of bolometers. One key technology for such arrays is readout multiplexing: the ability to read out many sensors simultaneously on the same set of wires. This paper describes a frequency-domain multiplexed readout syste…
▽ More
A technological milestone for experiments employing Transition Edge Sensor (TES) bolometers operating at sub-kelvin temperature is the deployment of detector arrays with 100s--1000s of bolometers. One key technology for such arrays is readout multiplexing: the ability to read out many sensors simultaneously on the same set of wires. This paper describes a frequency-domain multiplexed readout system which has been developed for and deployed on the APEX-SZ and South Pole Telescope millimeter wavelength receivers. In this system, the detector array is divided into modules of seven detectors, and each bolometer within the module is biased with a unique ~MHz sinusoidal carrier such that the individual bolometer signals are well separated in frequency space. The currents from all bolometers in a module are summed together and pre-amplified with Superconducting Quantum Interference Devices (SQUIDs) operating at 4 K. Room-temperature electronics demodulate the carriers to recover the bolometer signals, which are digitized separately and stored to disk. This readout system contributes little noise relative to the detectors themselves, is remarkably insensitive to unwanted microphonic excitations, and provides a technology pathway to multiplexing larger numbers of sensors.
△ Less
Submitted 17 July, 2012; v1 submitted 18 December, 2011;
originally announced December 2011.
-
Removing Orbital Debris with Lasers
Authors:
Claude R. Phipps,
Kevin L. Baker,
Brian Bradford,
E. Victor George,
Stephen B. Libby,
Duane A. Liedahl,
Bogdan Marcovici,
Scot S. Olivier,
Lyn D. Pleasance,
James P. Reilly,
Alexander Rubenchik,
David N. Strafford,
Michael T. Valley
Abstract:
Orbital debris in low Earth orbit (LEO) are now sufficiently dense that the use of LEO space is threatened by runaway collisional cascading. A problem predicted more than thirty years ago, the threat from debris larger than about 1 cm demands serious attention. A promising proposed solution uses a high power pulsed laser system on the Earth to make plasma jets on the objects, slowing them slightly…
▽ More
Orbital debris in low Earth orbit (LEO) are now sufficiently dense that the use of LEO space is threatened by runaway collisional cascading. A problem predicted more than thirty years ago, the threat from debris larger than about 1 cm demands serious attention. A promising proposed solution uses a high power pulsed laser system on the Earth to make plasma jets on the objects, slowing them slightly, and causing them to re-enter and burn up in the atmosphere. In this paper, we reassess this approach in light of recent advances in low-cost, light-weight modular design for large mirrors, calculations of laser-induced orbit changes and in design of repetitive, multi-kilojoule lasers, that build on inertial fusion research. These advances now suggest that laser orbital debris removal (LODR) is the most cost-effective way to mitigate the debris problem. No other solutions have been proposed that address the whole problem of large and small debris. A LODR system will have multiple uses beyond debris removal. International cooperation will be essential for building and operating such a system.
△ Less
Submitted 17 October, 2011;
originally announced October 2011.
-
Maximally Informative Statistics
Authors:
David R. Wolf,
Edward I. George
Abstract:
In this paper we propose a Bayesian, information theoretic approach to dimensionality reduction. The approach is formulated as a variational principle on mutual information, and seamlessly addresses the notions of sufficiency, relevance, and representation. Maximally informative statistics are shown to minimize a Kullback-Leibler distance between posterior distributions. Illustrating the approac…
▽ More
In this paper we propose a Bayesian, information theoretic approach to dimensionality reduction. The approach is formulated as a variational principle on mutual information, and seamlessly addresses the notions of sufficiency, relevance, and representation. Maximally informative statistics are shown to minimize a Kullback-Leibler distance between posterior distributions. Illustrating the approach, we derive the maximally informative one dimensional statistic for a random sample from the Cauchy distribution.
△ Less
Submitted 15 October, 2000;
originally announced October 2000.
