-
In-plane dielectric constant and conductivity of confined water
Authors:
R. Wang,
M. Souilamas,
A. Esfandiar,
R. Fabregas,
S. Benaglia,
H. Nevison-Andrews,
Q. Yang,
J. Normansell,
P. Ares,
G. Ferrari,
A. Principi,
A. K. Geim,
L. Fumagalli
Abstract:
Water is essential for almost every aspect of life on our planet and, unsurprisingly, its properties have been studied in great detail. However, disproportionately little remains known about the electrical properties of interfacial and strongly confined water where its structure deviates from that of bulk water, becoming distinctly layered. The structural change is expected to affect water's condu…
▽ More
Water is essential for almost every aspect of life on our planet and, unsurprisingly, its properties have been studied in great detail. However, disproportionately little remains known about the electrical properties of interfacial and strongly confined water where its structure deviates from that of bulk water, becoming distinctly layered. The structural change is expected to affect water's conductivity and particularly its polarizability, which in turn modifies intermolecular forces that play a crucial role in many physical and chemical processes. Here we use scanning dielectric microscopy to probe the in-plane electrical properties of water confined between atomically flat surfaces separated by distances down to 1 nm. For confinement exceeding a few nm, water exhibits an in-plane dielectric constant close to that of bulk water and its proton conductivity is notably enhanced, gradually increasing with decreasing water thickness. This trend abruptly changes when the confined water becomes only a few molecules thick. Its in-plane dielectric constant reaches giant, ferroelectric-like values of about 1,000 whereas the conductivity peaks at a few S/m, close to values characteristic of superionic liquids. We attribute the enhancement to strongly disordered hydrogen bonding induced by the few-layer confinement, which facilitates both easier in-plane polarization of molecular dipoles and faster proton exchange. This insight into the electrical properties of nanoconfined water is important for understanding many phenomena that occur at aqueous interfaces and in nanoscale pores.
△ Less
Submitted 31 July, 2024;
originally announced July 2024.
-
Proton and molecular permeation through the basal plane of monolayer graphene oxide
Authors:
Z. F. Wu,
P. Z. Sun,
O. J. Wahab,
Y. -T. Tao,
D. Barry,
D. Periyanagounder,
P. B. Pillai,
Q. Dai,
W. Q. Xiong,
L. F. Vega,
K. Lulla,
S. J. Yuan,
R. R. Nair,
E. Daviddi,
P. R. Unwin,
A. K. Geim,
M. Lozada-Hidalgo
Abstract:
Two-dimensional (2D) materials offer a prospect of membranes that combine negligible gas permeability with high proton conductivity and could outperform the existing proton exchange membranes used in various applications including fuel cells. Graphene oxide (GO), a well-known 2D material, facilitates rapid proton transport along its basal plane but proton conductivity across it remains unknown. It…
▽ More
Two-dimensional (2D) materials offer a prospect of membranes that combine negligible gas permeability with high proton conductivity and could outperform the existing proton exchange membranes used in various applications including fuel cells. Graphene oxide (GO), a well-known 2D material, facilitates rapid proton transport along its basal plane but proton conductivity across it remains unknown. It is also often presumed that individual GO monolayers contain a large density of nanoscale pinholes that lead to considerable gas leakage across the GO basal plane. Here we show that relatively large, micrometer-scale areas of monolayer GO are impermeable to gases, including helium, while exhibiting proton conductivity through the basal plane which is nearly two orders of magnitude higher than that of graphene. These findings provide insights into the key properties of GO and demonstrate that chemical functionalization of 2D crystals can be utilized to enhance their proton transparency without compromising gas impermeability.
△ Less
Submitted 25 October, 2023;
originally announced October 2023.
-
Proton transport through nanoscale corrugations in two-dimensional crystals
Authors:
O. J. Wahab,
E. Daviddi,
B. Xin,
P. Z. Sun,
E. Griffin,
A. W. Colburn,
D. Barry,
M. Yagmurcukardes,
F. M. Peeters,
A. K. Geim,
M. Lozada-Hidalgo,
P. R. Unwin
Abstract:
Defect-free graphene is impermeable to all atoms and ions at ambient conditions. Experiments that can resolve gas flows of a few atoms per hour through micrometre-sized membranes found that monocrystalline graphene is completely impermeable to helium, the smallest of atoms. Such membranes were also shown to be impermeable to all ions, including the smallest one, lithium. On the other hand, graphen…
▽ More
Defect-free graphene is impermeable to all atoms and ions at ambient conditions. Experiments that can resolve gas flows of a few atoms per hour through micrometre-sized membranes found that monocrystalline graphene is completely impermeable to helium, the smallest of atoms. Such membranes were also shown to be impermeable to all ions, including the smallest one, lithium. On the other hand, graphene was reported to be highly permeable to protons, nuclei of hydrogen atoms. There is no consensus, however, either on the mechanism behind the unexpectedly high proton permeability or even on whether it requires defects in graphene's crystal lattice. Here using high resolution scanning electrochemical cell microscopy (SECCM), we show that, although proton permeation through mechanically-exfoliated monolayers of graphene and hexagonal boron nitride cannot be attributed to any structural defects, nanoscale non-flatness of 2D membranes greatly facilitates proton transport. The spatial distribution of proton currents visualized by SECCM reveals marked inhomogeneities that are strongly correlated with nanoscale wrinkles and other features where strain is accumulated. Our results highlight nanoscale morphology as an important parameter enabling proton transport through 2D crystals, mostly considered and modelled as flat, and suggest that strain and curvature can be used as additional degrees of freedom to control the proton permeability of 2D materials.
△ Less
Submitted 8 May, 2023;
originally announced May 2023.
-
Understanding the anomalously low dielectric constant of confined water: an ab initio study
Authors:
Thomas Dufils,
Christoph Schran,
Ji Chen,
Andre K. Geim,
Laura Fumagalli,
Angelos Michaelides
Abstract:
Recent experiments have shown that the out-of-plane dielectric constant of water confined in nanoslits of graphite and hexagonal boron nitride (hBN) is vanishingly small. Despite extensive effort based mainly on classical force-field molecular dynamics (FFMD) approaches, the origin of this phenomenon is under debate. Here we used ab initio molecular dynamics simulations (AIMD) and AIMD-trained mac…
▽ More
Recent experiments have shown that the out-of-plane dielectric constant of water confined in nanoslits of graphite and hexagonal boron nitride (hBN) is vanishingly small. Despite extensive effort based mainly on classical force-field molecular dynamics (FFMD) approaches, the origin of this phenomenon is under debate. Here we used ab initio molecular dynamics simulations (AIMD) and AIMD-trained machine learning potentials to explore the structure and electronic properties of water confined inside graphene and hBN slits. We found that the reduced dielectric constant arises mainly from the anti-parallel alignment of the water dipoles in the perpendicular direction to the surface in the first two water layers near the solid interface. Although the water molecules retain liquid-like mobility, the interfacial layers exhibit a net ferroelectric ordering and constrained hydrogen-bonding orientations which lead to much reduced polarization fluctuations in the out-of-plane direction at room temperature. Importantly, we show that this effect is independent of the distance between the two confining surfaces of the slit, and it originates in the spontaneous polarization of interfacial water. Our calculations also show no significant variations in the structure and polarization of water near graphene and hBN, despite their different electronic structures. These results are important as they offer new insight into a property of water that plays a critical role in the long-range interactions between surfaces, the electric double-layer formation, ion solvation and transport, as well as biomolecular functioning.
△ Less
Submitted 25 November, 2022;
originally announced November 2022.
-
Photo-accelerated water dissociation across one-atom-thick electrodes
Authors:
J. Cai,
E. Griffin,
V. Guarochico-Moreira,
D. Barry,
B. Xin,
S. Huang,
A. K. Geim,
F. M. Peeters,
M. Lozada-Hidalgo
Abstract:
Recent experiments demonstrated that interfacial water dissociation (H2O = H+ + OH-) could be accelerated exponentially by an electric field applied to graphene electrodes, a phenomenon related to the Wien effect. Here we report an order-of-magnitude acceleration of the interfacial water dissociation reaction under visible-light illumination. This process is accompanied by spatial separation of pr…
▽ More
Recent experiments demonstrated that interfacial water dissociation (H2O = H+ + OH-) could be accelerated exponentially by an electric field applied to graphene electrodes, a phenomenon related to the Wien effect. Here we report an order-of-magnitude acceleration of the interfacial water dissociation reaction under visible-light illumination. This process is accompanied by spatial separation of protons and hydroxide ions across one-atom-thick graphene and enhanced by strong interfacial electric fields. The found photo-effect is attributed to the combination of graphene's perfect selectivity with respect to protons, which prevents proton-hydroxide recombination, and to proton transport acceleration by the Wien effect, which occurs in synchrony with the water dissociation reaction. Our findings provide fundamental insights into ion dynamics near atomically-thin proton-selective interfaces and suggest that strong interfacial fields can enhance and tune very fast ionic processes, which is of relevance for applications in photo-catalysis and designing reconfigurable materials.
△ Less
Submitted 31 October, 2022;
originally announced October 2022.
-
Wien effect in interfacial water dissociation through proton-permeable graphene electrodes
Authors:
J. Cai,
E. Griffin,
V. Guarochico-Moreira,
D. Barry,
B. Xin,
M. Yagmurcukardes,
S. Zhang,
A. K. Geim,
F. M. Peeters,
M. Lozada-Hidalgo
Abstract:
Strong electric fields can accelerate molecular dissociation reactions. The phenomenon known as the Wien effect was previously observed using high-voltage electrolysis cells that produced fields of about 10^7 V m-1, sufficient to accelerate the dissociation of weakly bound molecules (e.g., organics and weak electrolytes). The observation of the Wien effect for the common case of water dissociation…
▽ More
Strong electric fields can accelerate molecular dissociation reactions. The phenomenon known as the Wien effect was previously observed using high-voltage electrolysis cells that produced fields of about 10^7 V m-1, sufficient to accelerate the dissociation of weakly bound molecules (e.g., organics and weak electrolytes). The observation of the Wien effect for the common case of water dissociation (H2O = H+ + OH-) has remained elusive. Here we study the dissociation of interfacial water adjacent to proton-permeable graphene electrodes and observe strong acceleration of the reaction in fields reaching above 10^8 V m-1. The use of graphene electrodes allow measuring the proton currents arising exclusively from the dissociation of interfacial water, while the electric field driving the reaction is monitored through the carrier density induced in graphene by the same field. The observed exponential increase in proton currents is in quantitative agreement with Onsager's theory. Our results also demonstrate that graphene electrodes can be valuable for the investigation of various interfacial phenomena involving proton transport.
△ Less
Submitted 23 August, 2022;
originally announced August 2022.
-
Two-dimensional Functional Minerals for Sustainable Optics
Authors:
Ziyang Huang,
Tianshu Lan,
Lixin Dai,
Xueting Zhao,
Zhongyue Wang,
Zehao Zhang,
Bing Li,
Jialiang Li,
Jingao Liu,
Baofu Ding,
Andre K. Geim,
Hui-Ming Cheng,
Bilu Liu
Abstract:
Optical device is a key component in our lives and organic liquid crystals are nowadays widely used to reduce human imprint. However, this technology still suffers from relatively high costs, toxicity and other environmental impacts, and cannot fully meet the demand of future sustainable society. Here we describe an alternative approach to colour-tuneable optical devices, which is based on sustain…
▽ More
Optical device is a key component in our lives and organic liquid crystals are nowadays widely used to reduce human imprint. However, this technology still suffers from relatively high costs, toxicity and other environmental impacts, and cannot fully meet the demand of future sustainable society. Here we describe an alternative approach to colour-tuneable optical devices, which is based on sustainable inorganic liquid crystals derived from two-dimensional mineral materials abundant in nature. The prototypical two-dimensional mineral of vermiculite is massively produced by a green method, possessing size-to-thickness ratios of >103, in-plane magnetisation of >10 emu g-1, and an optical bandgap of >3 eV. These characteristics endow two-dimensional vermiculite with sensitive magneto-birefringence response, which is several orders of magnitude larger than organic counterparts, as well as capability of broad-spectrum modulation. Our finding consequently permits the fabrication of various chromic devices with low or even zero-energy consumption, which can be used for sustainable optics.
△ Less
Submitted 15 February, 2022;
originally announced February 2022.
-
Capillary condensation under atomic-scale confinement
Authors:
Qian Yang,
P. Z. Sun,
L. Fumagalli,
Y. V. Stebunov,
S. J. Haigh,
Z. W. Zhou,
I. V. Grigorieva,
F. C. Wang,
A. K. Geim
Abstract:
Capillary condensation of water is ubiquitous in nature and technology. It routinely occurs in granular and porous media, can strongly alter such properties as adhesion, lubrication, friction and corrosion, and is important in many processes employed by microelectronics, pharmaceutical, food and other industries. The century-old Kelvin equation is commonly used to describe condensation phenomena a…
▽ More
Capillary condensation of water is ubiquitous in nature and technology. It routinely occurs in granular and porous media, can strongly alter such properties as adhesion, lubrication, friction and corrosion, and is important in many processes employed by microelectronics, pharmaceutical, food and other industries. The century-old Kelvin equation is commonly used to describe condensation phenomena and shown to hold well for liquid menisci with diameters as small as several nm. For even smaller capillaries that are involved in condensation under ambient humidity and, hence, of particular practical interest, the Kelvin equation is expected to break down, because the required confinement becomes comparable to the size of water molecules. Here we take advantage of van der Waals assembly of two-dimensional crystals to create atomic-scale capillaries and study condensation inside. Our smallest capillaries are less than 4 angstroms in height and can accommodate just a monolayer of water. Surprisingly, even at this scale, the macroscopic Kelvin equation using the characteristics of bulk water is found to describe accurately the condensation transition in strongly hydrophilic (mica) capillaries and remains qualitatively valid for weakly hydrophilic (graphene) ones. We show that this agreement is somewhat fortuitous and can be attributed to elastic deformation of capillary walls, which suppresses giant oscillatory behavior expected due to commensurability between atomic-scale confinement and water molecules. Our work provides a much-needed basis for understanding of capillary effects at the smallest possible scale important in many realistic situations.
△ Less
Submitted 23 September, 2020;
originally announced September 2020.
-
Giant magneto-birefringence effect and tuneable colouration of 2D crystals' suspensions
Authors:
Baofu Ding,
Wenjun Kuang,
Yikun Pan,
I. V. Grigorieva,
A. K. Geim,
Bilu Liu,
Hui-Ming Cheng
Abstract:
One of the long sought-after goals in manipulation of light through light-matter interactions is the realization of magnetic-field-tuneable colouration, so-called magneto-chromatic effect, which holds great promise for optical, biochemical and medical applications due to its contactless and non-invasive nature. This goal can be achieved by magnetic-field controlled birefringence, where colours are…
▽ More
One of the long sought-after goals in manipulation of light through light-matter interactions is the realization of magnetic-field-tuneable colouration, so-called magneto-chromatic effect, which holds great promise for optical, biochemical and medical applications due to its contactless and non-invasive nature. This goal can be achieved by magnetic-field controlled birefringence, where colours are produced by the interference between phase-retarded components of transmitted polarised light. Thus far birefringence-tuneable coloration has been demonstrated using electric field, material chirality and mechanical strain but magnetic field control remained elusive due to either weak magneto-optical response of transparent media or low transmittance to visible light of magnetically responsive media, such as ferrofluids. Here we demonstrate magnetically tuneable colouration of aqueous suspensions of two-dimensional cobalt-doped titanium oxide which exhibit an anomalously large magneto-birefringence effect. The colour of the suspensions can be tuned over more than two wavelength cycles in the visible range by moderate magnetic fields below 0.8 T. We show that such giant magneto-chromatic response is due to particularly large phase retardation (>3 pi) of the polarised light, which in its turn is a combined result of a large Cotton-Mouton coefficient (three orders of magnitude larger than for known liquid crystals), relatively high saturation birefringence (delta n = 2 x 10^-4) and high transparency of our suspensions to visible light. The work opens a new avenue to achieve tuneable colouration through engineered magnetic birefringence and can readily be extended to other magnetic 2D nanocrystals. The demonstrated effect can be used in a variety of magneto-optical applications, including magnetic field sensors, wavelength-tuneable optical filters and see-through printing.
△ Less
Submitted 18 July, 2020;
originally announced July 2020.
-
Perfect proton selectivity in ion transport through two-dimensional crystals
Authors:
L. Mogg,
S. Zhang,
G. -P. Hao,
K. Gopinadhan,
D. Barry,
B. L. Liu,
H. M. Cheng,
A. K. Geim,
M. Lozada-Hidalgo
Abstract:
Defect-free monolayers of graphene and hexagonal boron nitride were previously shown to be surprisingly permeable to thermal protons, despite being completely impenetrable to all gases. It remains untested whether small ions can permeate through the two-dimensional crystals. Here we show that mechanically exfoliated graphene and hexagonal boron nitride exhibit perfect Nernst selectivity such that…
▽ More
Defect-free monolayers of graphene and hexagonal boron nitride were previously shown to be surprisingly permeable to thermal protons, despite being completely impenetrable to all gases. It remains untested whether small ions can permeate through the two-dimensional crystals. Here we show that mechanically exfoliated graphene and hexagonal boron nitride exhibit perfect Nernst selectivity such that only protons can permeate through, with no detectable flow of counterions. In the experiments, we used suspended monolayers that had few if any atomic-scale defects, as shown by gas permeation tests, and placed them to separate reservoirs filled with hydrochloric acid solutions. Protons accounted for all the electrical current and chloride ions were blocked. This result corroborates the previous conclusion that thermal protons can pierce defect-free two-dimensional crystals. Besides importance for theoretical developments, our results are also of interest for research on various separation technologies based on two-dimensional materials.
△ Less
Submitted 31 August, 2019; v1 submitted 21 August, 2019;
originally announced August 2019.
-
Atomically-thin micas as proton conducting membranes
Authors:
L. Mogg,
G. -P. Hao,
S. Zhang,
C. Bacaksiz,
Y. Zou,
S. J. Haigh,
F. M. Peeters,
A. K. Geim,
M. Lozada-Hidalgo
Abstract:
Monolayers of graphene and hexagonal boron nitride (hBN) are highly permeable to thermal protons. For thicker two-dimensional (2D) materials, proton conductivity diminishes exponentially so that, for example, monolayer MoS2 that is just three atoms thick is completely impermeable to protons. This seemed to suggest that only one-atom-thick crystals could be used as proton conducting membranes. Here…
▽ More
Monolayers of graphene and hexagonal boron nitride (hBN) are highly permeable to thermal protons. For thicker two-dimensional (2D) materials, proton conductivity diminishes exponentially so that, for example, monolayer MoS2 that is just three atoms thick is completely impermeable to protons. This seemed to suggest that only one-atom-thick crystals could be used as proton conducting membranes. Here we show that few-layer micas that are rather thick on the atomic scale become excellent proton conductors if native cations are ion-exchanged for protons. Their areal conductivity exceeds that of graphene and hBN by one-two orders of magnitude. Importantly, ion-exchanged 2D micas exhibit this high conductivity inside the infamous gap for proton-conducting materials, which extends from 100 C to 500 C. Areal conductivity of proton-exchanged monolayer micas can reach above 100 S cm-2 at 500 C, well above the current requirements for the industry roadmap. We attribute the fast proton permeation to 5 A-wide tubular channels that perforate micas' crystal structure which, after ion exchange, contain only hydroxyl groups inside. Our work indicates that there could be other 2D crystals with similar nm-scale channels, which could help close the materials gap in proton-conducting applications.
△ Less
Submitted 11 June, 2019;
originally announced June 2019.
-
Anomalously low dielectric constant of confined water
Authors:
L. Fumagalli,
A. Esfandiar,
R. Fabregas,
S. Hu,
P. Ares,
A. Janardanan,
Q. Yang,
B. Radha,
T. Taniguchi,
K. Watanabe,
G. Gomila,
K. S. Novoselov,
A. K. Geim
Abstract:
The dielectric constant of interfacial water has been predicted to be smaller than that of bulk water (= 80) because the rotational freedom of water dipoles is expected to decrease near surfaces, yet experimental evidence is lacking. We report local capacitance measurements for water confined between two atomically-flat walls separated by various distances down to 1 nm. Our experiments reveal the…
▽ More
The dielectric constant of interfacial water has been predicted to be smaller than that of bulk water (= 80) because the rotational freedom of water dipoles is expected to decrease near surfaces, yet experimental evidence is lacking. We report local capacitance measurements for water confined between two atomically-flat walls separated by various distances down to 1 nm. Our experiments reveal the presence of an interfacial layer with vanishingly small polarization such that its out-of-plane dielectric constant is only approximately 2. The electrically dead layer is found to be two to three molecules thick. These results provide much needed feedback for theories describing water-mediated surface interactions and behavior of interfacial water, and show a way to investigate the dielectric properties of other fluids and solids under extreme confinement.
△ Less
Submitted 12 June, 2018;
originally announced June 2018.
-
Ballistic molecular transport through two-dimensional channels
Authors:
A. Keerthi,
A. K. Geim,
A. Janardanan,
A. P. Rooney,
A. Esfandiar,
S. Hu,
S. A. Dar,
I. V. Grigorieva,
S. J. Haigh,
F. C. Wang,
B. Radha
Abstract:
Gas permeation through nanoscale pores is ubiquitous in nature and plays an important role in a plethora of technologies. Because the pore size is typically smaller than the mean free path of gas molecules, their flow is conventionally described by the Knudsen theory that assumes diffuse reflection (random-angle scattering) at confining walls. This assumption has proven to hold surprisingly well i…
▽ More
Gas permeation through nanoscale pores is ubiquitous in nature and plays an important role in a plethora of technologies. Because the pore size is typically smaller than the mean free path of gas molecules, their flow is conventionally described by the Knudsen theory that assumes diffuse reflection (random-angle scattering) at confining walls. This assumption has proven to hold surprisingly well in experiment, and only a few cases of partially specular (mirror-like) reflection are known. Here we report gas transport through angstrom-scale channels with atomically-flat walls and show that surface scattering can be both diffuse or specular, depending on fine details of the surface atomic landscape, and quantum effects contribute to the specularity at room temperature. The channels made from graphene or boron nitride allow a helium gas flow that is orders of magnitude faster than expected from the theory. This is explained by specular surface scattering, which leads to ballistic transport and frictionless gas flow. Similar channels but with molybdenum disulfide walls exhibit much slower permeation that remains well described by Knudsen diffusion. The difference is attributed to stronger atomic corrugations at MoS2 surfaces, which are similar in height to the size of transported atoms and their de Broglie wavelength. The importance of the latter, matter-wave contribution is corroborated by the observation of a reversed isotope effect in which the mass flow of hydrogen is notably higher than that of deuterium, in contrast to the relation expected for classical flows. Our results provide insights into atomistic details of molecular permeation, which so far could be accessed only in simulations, and show a possibility of studying gas transport under a controlled confinement comparable to the quantum-mechanical size of atoms.
△ Less
Submitted 15 May, 2018;
originally announced May 2018.
-
Giant photo-effect in proton transport through graphene membranes
Authors:
Marcelo Lozada-Hidalgo,
Sheng Zhang,
Sheng Hu,
Vasyl G. Kravets,
Francisco J. Rodriguez,
Alexey Berdyugin,
Alexander Grigorenko,
Andre K. Geim
Abstract:
Graphene has recently been shown to be permeable to thermal protons, the nuclei of hydrogen atoms, which sparked interest in its use as a proton-conducting membrane in relevant technologies. However, the influence of light on proton permeation remains unknown. Here we report that proton transport through Pt-nanoparticle-decorated graphene can be enhanced strongly by illuminating it with visible li…
▽ More
Graphene has recently been shown to be permeable to thermal protons, the nuclei of hydrogen atoms, which sparked interest in its use as a proton-conducting membrane in relevant technologies. However, the influence of light on proton permeation remains unknown. Here we report that proton transport through Pt-nanoparticle-decorated graphene can be enhanced strongly by illuminating it with visible light. Using electrical measurements and mass spectrometry, we find a photoresponsivity of 10^4 A W-1, which translates into a gain of 10^4 protons per photon with response times in the microsecond range. These characteristics are competitive with those of state-of-the-art photodetectors that are based on electron transport using silicon and novel two-dimensional materials. The photo-proton effect can be important for graphene's envisaged use in fuel cells and hydrogen isotope separation. Our observations can also be of interest for other applications such as light-induced water splitting, photocatalysis and novel photodetectors.
△ Less
Submitted 15 January, 2018;
originally announced January 2018.
-
Ultrathin graphene-based membrane with precise molecular sieving and ultrafast solvent permeation
Authors:
Q. Yang,
Y. Su,
C. Chi,
C. T. Cherian,
K. Huang,
V. G. Kravets,
F. C. Wang,
J. C. Zhang,
A. Pratt,
A. N. Grigorenko,
F. Guinea,
A. K Geim,
R. R. Nair
Abstract:
Graphene oxide (GO) membranes continue to attract intense interest due to their unique molecular sieving properties combined with fast permeation rates. However, the membranes' use has been limited mostly to aqueous solutions because GO membranes appear to be impermeable to organic solvents, a phenomenon not fully understood yet. Here, we report efficient and fast filtration of organic solutions t…
▽ More
Graphene oxide (GO) membranes continue to attract intense interest due to their unique molecular sieving properties combined with fast permeation rates. However, the membranes' use has been limited mostly to aqueous solutions because GO membranes appear to be impermeable to organic solvents, a phenomenon not fully understood yet. Here, we report efficient and fast filtration of organic solutions through GO laminates containing smooth two-dimensional (2D) capillaries made from flakes with large sizes of ~ 10-20 micron. Without sacrificing their sieving characteristics, such membranes can be made exceptionally thin, down to ~ 10 nm, which translates into fast permeation of not only water but also organic solvents. We attribute the organic solvent permeation and sieving properties of ultrathin GO laminates to the presence of randomly distributed pinholes that are interconnected by short graphene channels with a width of 1 nm. With increasing the membrane thickness, the organic solvent permeation rates decay exponentially but water continues to permeate fast, in agreement with previous reports. The application potential of our ultrathin laminates for organic-solvent nanofiltration is demonstrated by showing >99.9% rejection of various organic dyes with small molecular weights dissolved in methanol. Our work significantly expands possibilities for the use of GO membranes in purification, filtration and related technologies.
△ Less
Submitted 15 September, 2017;
originally announced October 2017.
-
Nanoscale thermal imaging of dissipation in quantum systems
Authors:
Dorri Halbertal,
Jo Cuppens,
Moshe Ben Shalom,
Lior Embon,
Nitzan Shadmi,
Yonathan Anahory,
HR Naren,
Jayanta Sarkar,
Aviram Uri,
Yuval Ronen,
Yury Myasoedov,
Leonid Levitov,
Ernesto Joselevich,
Andre Konstantin Geim,
Eli Zeldov
Abstract:
Energy dissipation is a fundamental process governing the dynamics of physical, chemical, and biological systems. It is also one of the main characteristics distinguishing quantum and classical phenomena. In condensed matter physics, in particular, scattering mechanisms, loss of quantum information, or breakdown of topological protection are deeply rooted in the intricate details of how and where…
▽ More
Energy dissipation is a fundamental process governing the dynamics of physical, chemical, and biological systems. It is also one of the main characteristics distinguishing quantum and classical phenomena. In condensed matter physics, in particular, scattering mechanisms, loss of quantum information, or breakdown of topological protection are deeply rooted in the intricate details of how and where the dissipation occurs. Despite its vital importance the microscopic behavior of a system is usually not formulated in terms of dissipation because the latter is not a readily measureable quantity on the microscale. Although nanoscale thermometry is gaining much recent interest, the existing thermal imaging methods lack the necessary sensitivity and are unsuitable for low temperature operation required for study of quantum systems. Here we report a superconducting quantum interference nano-thermometer device with sub 50 nm diameter that resides at the apex of a sharp pipette and provides scanning cryogenic thermal sensing with four orders of magnitude improved thermal sensitivity of below 1 μK/Hz1/2. The non-contact non-invasive thermometry allows thermal imaging of very low nanoscale energy dissipation down to the fundamental Landauer limit of 40 fW for continuous readout of a single qubit at 1 GHz at 4.2 K. These advances enable observation of dissipation due to single electron charging of individual quantum dots in carbon nanotubes and reveal a novel dissipation mechanism due to resonant localized states in hBN encapsulated graphene, opening the door to direct imaging of nanoscale dissipation processes in quantum matter.
△ Less
Submitted 6 September, 2016;
originally announced September 2016.
-
Electrically pumped single-defect light emitters in WSe$_2$
Authors:
S. Schwarz,
A. Kozikov,
F. Withers,
J. K. Maguire,
A. P. Foster,
S. Dufferwiel,
L. Hague,
M. N. Makhonin,
L. R. Wilson,
A . K. Geim,
K. S. Novoselov,
A. I. Tartakovskii
Abstract:
Recent developments in fabrication of van der Waals heterostructures enable new type of devices assembled by stacking atomically thin layers of two-dimensional materials. Using this approach, we fabricate light-emitting devices based on a monolayer WSe$_2$, and also comprising boron nitride tunnelling barriers and graphene electrodes, and observe sharp luminescence spectra from individual defects…
▽ More
Recent developments in fabrication of van der Waals heterostructures enable new type of devices assembled by stacking atomically thin layers of two-dimensional materials. Using this approach, we fabricate light-emitting devices based on a monolayer WSe$_2$, and also comprising boron nitride tunnelling barriers and graphene electrodes, and observe sharp luminescence spectra from individual defects in WSe$_2$ under both optical and electrical excitation. This paves the way towards the realization of electrically-pumped quantum emitters in atomically thin semiconductors. In addition we demonstrate tuning by more than 1 meV of the emission energy of the defect luminescence by applying a vertical electric field. This provides an estimate of the permanent electric dipole created by the corresponding electron-hole pair. The light-emitting devices investigated in our work can be assembled on a variety of substrates enabling a route to integration of electrically pumped single quantum emitters with existing technologies in nano-photonics and optoelectronics.
△ Less
Submitted 6 May, 2016;
originally announced May 2016.
-
Precise and ultrafast molecular sieving through graphene oxide membranes
Authors:
R. K. Joshi,
P. Carbone,
F. C. Wang,
V. G. Kravets,
Y. Su,
I. V. Grigorieva,
H. A. Wu,
A. K. Geim,
R. R. Nair
Abstract:
There has been intense interest in filtration and separation properties of graphene-based materials that can have well-defined nanometer pores and exhibit low frictional water flow inside them. Here we investigate molecular permeation through graphene oxide laminates. They are vacuum-tight in the dry state but, if immersed in water, act as molecular sieves blocking all solutes with hydrated radii…
▽ More
There has been intense interest in filtration and separation properties of graphene-based materials that can have well-defined nanometer pores and exhibit low frictional water flow inside them. Here we investigate molecular permeation through graphene oxide laminates. They are vacuum-tight in the dry state but, if immersed in water, act as molecular sieves blocking all solutes with hydrated radii larger than 4.5A. Smaller ions permeate through the membranes with little impedance, many orders of magnitude faster than the diffusion mechanism can account for. We explain this behavior by a network of nanocapillaries that open up in the hydrated state and accept only species that fit in. The ultrafast separation of small salts is attributed to an 'ion sponge' effect that results in highly concentrated salt solutions inside graphene capillaries.
△ Less
Submitted 14 January, 2014;
originally announced January 2014.
-
Unimpeded permeation of water through helium-leak-tight graphene-based membranes
Authors:
R. R. Nair,
H. A. Wu,
P. N. Jayaram,
I. V. Grigorieva,
A. K. Geim
Abstract:
Permeation through nanometer pores is important in the design of materials for filtration and separation techniques and because of unusual fundamental behavior arising at the molecular scale. We found that submicron-thick membranes made from graphene oxide can be completely impermeable to liquids, vapors and gases, including helium, but allow unimpeded permeation of water (H2O permeates through th…
▽ More
Permeation through nanometer pores is important in the design of materials for filtration and separation techniques and because of unusual fundamental behavior arising at the molecular scale. We found that submicron-thick membranes made from graphene oxide can be completely impermeable to liquids, vapors and gases, including helium, but allow unimpeded permeation of water (H2O permeates through the membranes at least 10^10 times faster than He). We attribute these seemingly incompatible observations to a low-friction flow of a monolayer of water through two dimensional capillaries formed by closely spaced graphene sheets. Diffusion of other molecules is blocked by reversible narrowing of the capillaries in low humidity and/or by their clogging with water.
△ Less
Submitted 15 December, 2011;
originally announced December 2011.