-
Triboelectric Pixels as building blocks for microscale and large area integration of drop energy harvesters
Authors:
Ali Ghaffarinejad,
Xabier Garcia-Casas,
Fernando Nunez-Galvez,
Jorge Budagosky,
Vanda Godinho,
Carmen Lopez-Santos,
Juan Ramon Sanchez-Valencia,
Angel Barranco,
Ana Borras
Abstract:
The ultimate step towards the exploitation of water as a clean and renewable energy source addresses the energies stored in the low frequencies of liquid flows, which demands flexible solutions to adapt to multiple scenarios, from raindrops to waves, including water moving in pipelines and microdevices. Thus, harvesting low-frequency flows is a young concept compared to solar and wind powers, wher…
▽ More
The ultimate step towards the exploitation of water as a clean and renewable energy source addresses the energies stored in the low frequencies of liquid flows, which demands flexible solutions to adapt to multiple scenarios, from raindrops to waves, including water moving in pipelines and microdevices. Thus, harvesting low-frequency flows is a young concept compared to solar and wind powers, where triboelectric nanogenerators have been revealed as the most promising relevant actors. However, despite widespread attempts by researchers, the drop energy harvesters' output power is still low, mainly because of the limitations in candidates endowed with ideal triboelectric and wetting properties and also the non-optimal and centimetre-scale device architecture that prevents the conversion of the complete kinetic energy of impinging drops. Herein, we disclose a microscale triboelectric nanogenerator that can harvest a high density of electrical power from drops through a single, submillisecond, long-lasting step. The mechanism relies on an instantaneous electrical capacitance variation owing to the high-speed contact of the drops with the electrodes' active area. We discuss the role of the precharged effect of the triboelectric surface in the time characteristic of the conversion event. The capacitive and microscale structure of the device is endowed with a small form factor that allows for the production of densely packed arrays. The proposed architecture can be adjusted to different liquids and scales and is compatible with a variety of triboelectric surfaces, including flexible, transparent, and thin-film approaches.
△ Less
Submitted 15 August, 2024; v1 submitted 3 May, 2024;
originally announced May 2024.
-
Paper-based ZnO self-powered sensors and nanogenerators by plasma technology
Authors:
Xabier Garcia-Casas,
Francisco J. Aparicio,
Jorge Budagosky,
Ali Ghaffarinejad,
Noel Orozco-Corrales,
Kostya,
Ostrikov,
Juan R. Sanchez-Valencia,
Angel Barranco,
Ana Borras
Abstract:
Nanogenerators and self-powered nanosensors have shown the potential to power low-consumption electronics and human-machine interfaces, but their practical implementation requires reliable, environmentally friendly and scalable, processes for manufacturing and processing. This article presents a plasma synthesis approach for the fabrication of piezoelectric nanogenerators (PENGs) and self-powered…
▽ More
Nanogenerators and self-powered nanosensors have shown the potential to power low-consumption electronics and human-machine interfaces, but their practical implementation requires reliable, environmentally friendly and scalable, processes for manufacturing and processing. This article presents a plasma synthesis approach for the fabrication of piezoelectric nanogenerators (PENGs) and self-powered sensors on paper substrates. Polycrystalline ZnO nanocolumnar thin films are deposited by plasma-enhanced chemical vapour deposition on common paper supports using a microwave electron cyclotron resonance reactor working at room temperature yielding high growth rates and low structural and interfacial stresses. Applying Kinetic Monte Carlo simulation, we elucidate the basic shadowing mechanism behind the characteristic microstructure and porosity of the ZnO thin films, relating them to an enhanced piezoelectric response to periodic and random inputs. The piezoelectric devices are assembled by embedding the ZnO films in PMMA and using Au electrodes in two different configurations: laterally and vertically contacted devices. We present the response of the laterally connected devices as a force sensor for low-frequency events with different answers to the applied force depending on the impedance circuit, i.e. load values range, a behaviour that is theoretically analyzed. The vertical devices reach power densities as high as 80 nW/cm2 with a mean power output of 20 nW/cm2. We analyze their actual-scenario performance by activation with a fan and handwriting. Overall, this work demonstrates the advantages of implementing plasma deposition for piezoelectric films to develop robust, flexible, stretchable, and enhanced-performance nanogenerators and self-powered piezoelectric sensors compatible with inexpensive and recyclable supports
△ Less
Submitted 21 July, 2023; v1 submitted 7 May, 2023;
originally announced May 2023.
-
Highly anisotropic organometal halide perovskite nanowalls grown by Glancing Angle Deposition
Authors:
Javier Castillo-Seoane,
Lidia Contreras-Bernal,
Jose M. Obrero-Perez,
Xabier Garcia-Casas,
Francisco Lorenzo-Lazaro,
Francisco J. Aparicio,
M. Carmen Lopez-Santos,
T. Cristina Rojas,
Juan A. Anta,
Ana Borras,
Angel Barranco,
Juan R. Sanchez-Valencia
Abstract:
Polarizers are ubiquitous components in optoelectronic devices of daily use as displays, optical sensors or photographic cameras, among others. Yet the control over light polarization is an unresolved challenge as the main drawback of the current display technologies relays in significant optical losses. In such a context, organometal halide perovskites can play a decisive role given their flexibl…
▽ More
Polarizers are ubiquitous components in optoelectronic devices of daily use as displays, optical sensors or photographic cameras, among others. Yet the control over light polarization is an unresolved challenge as the main drawback of the current display technologies relays in significant optical losses. In such a context, organometal halide perovskites can play a decisive role given their flexible synthesis with under design optical properties . Therefore, along with their outstanding electrical properties have elevated hybrid perovskites as the material of choice in photovoltaics and optoelectronics. Among the different organometal halide perovskite nanostructures, nanowires and nanorods have lately arise as key players for the control of light polarization for lighting or detector applications. Herein, we will present the unprecedented fabrication of highly aligned and anisotropic methylammonium lead iodide (MAPI) perovskite nanowalls by Glancing Angle Deposition of PbI2 under high vacuum followed by CH3NH3I deposition at normal angle. Our approach offers a direct route for the fabrication of perovskite nanostructures virtually on any substrate, including on photovoltaic devices. The unparalleled alignment degree of the perovskite nanowalls provides the samples with strong anisotropic optical properties such as light absorption and photoluminescence, the latter with a maximum polarization ratio of P=0.43. Furthermore, the implementation of the MAPI nanowalls in photovoltaic devices provides them with a polarization-sensitive response, with a maximum photocurrent difference of 2.1 % when illuminating with the near-infrared range of the solar spectrum (>700 nm). Our facile vacuum-based approach embodies a milestone in the development of last generation polarization-sensitive perovskite-based optoelectronic devices such as lighting appliances or self-powered photodetectors.
△ Less
Submitted 15 September, 2021;
originally announced September 2021.
-
Plasma engineering of microstructured piezo and triboelectric hybrid nanogenerators for wide bandwidth vibration energy harvesting
Authors:
Xabier García-Casas,
Ali Ghaffarinehad,
Francisco J. Aparicio,
Javier Castillo-Seoane,
Carmen López-Santos,
Juan P. Espinós,
José Cotrino,
Juan Ramón Sánchez-Valencia,
Ángel Barranco,
Ana Borrás
Abstract:
We introduce herein the advanced application of low pressure plasma procedures for the development of piezo and triboelectric mode I hybrid nanogenerators. Thus, plasma assisted deposition and functionalization methods are presented as key enabling technologies for the nanoscale design of ZnO polycrystalline shells, the formation of conducting metallic cores in core@shell nanowires, and for the so…
▽ More
We introduce herein the advanced application of low pressure plasma procedures for the development of piezo and triboelectric mode I hybrid nanogenerators. Thus, plasma assisted deposition and functionalization methods are presented as key enabling technologies for the nanoscale design of ZnO polycrystalline shells, the formation of conducting metallic cores in core@shell nanowires, and for the solventless surface modification of polymeric coatings and matrixes. We show how the perfluorinated chains grafting of PDMS provides a reliable approach to increase the hydrophobicity and surface charges at the same time that keeping the PDMS mechanical properties. In this way, we produce efficient Ag/ZnO convoluted piezoelectric nanogenerators supported on flexible substrates and embedded in PDMS compatible with a contact separation triboelectric architecture. Factors like crystal-line texture, ZnO thickness, nanowires aspect ratio, and surface chemical modification of the PDMS are explored to optimize the power output of the nanogenerators aimed for harvesting from low-frequency vibrations. Just by manual trigger-ing, the hybrid device can charge a microcapacitor to switch on an array of color LEDs. Outstandingly, this simple three-layer architecture allows for harvesting vibration energy in a wide bandwidth, thus, we show the performance characteristics for frequencies between 1 Hz to 50 Hz and demonstrate the successful activation of the system up to ca. 800 Hz
△ Less
Submitted 9 September, 2021; v1 submitted 22 August, 2021;
originally announced August 2021.
-
3D core@multishell piezoelectric nanogenerators
Authors:
Alejandro-Nicolas Filippin,
Juan-Ramon Sanchez-Valencia,
Xabier Garcia-Casas,
Victor Lopez-Flores,
Manuel Macias-Montero,
Fabian Frutos,
Angel Barranco,
Ana Borras
Abstract:
The thin film configuration presents obvious practical advantages over the 1D implementation in energy harvesting systems such as easily manufacturing and processing and long lasting and stable devices. However, most of the ZnO-based piezoelectric nanogenerators (PENGs) reported so far relay in the exploitation of single-crystalline ZnO nanowires because their self-orientation in the c-axis and ab…
▽ More
The thin film configuration presents obvious practical advantages over the 1D implementation in energy harvesting systems such as easily manufacturing and processing and long lasting and stable devices. However, most of the ZnO-based piezoelectric nanogenerators (PENGs) reported so far relay in the exploitation of single-crystalline ZnO nanowires because their self-orientation in the c-axis and ability to accommodate long deformations resulting in a high piezoelectric performance. Herein, we show an innovative approach aiming to produce PENGs by combining polycrystalline ZnO layers fabricated at room temperature by plasma assisted deposition with supported small-molecule organic nanowires (ONWs) acting as 1D scaffold. The resulting hybrid nanostructure is formed by a single-crystalline organic nanowire conformally surrounded by a three dimensional (3D) ZnO shell that combines the mechanical properties of the organic core with the piezoelectric response of the ZnO layer. In a loop forward towards the integration of multiple functions within a single wire, we have also developed ONW@Au@ZnO nanowires including a gold shell acting as inner nanoscopic electrode. Thus, we have built and compare thin films and 3D core@shell ONW@ZnO and ONW@Au@ZnO PENGs showing output piezo-voltages up to 170 mV. The synergistic combination of functionalities in the ONW@Au@ZnO devices promotes an enhanced performance generating piezo-currents almost twenty times larger than the ONW@ZnO nanowires and superior to the thin film nanogenerators for equivalent and higher thicknesses.
△ Less
Submitted 15 October, 2018;
originally announced October 2018.
