Showing 1–50 of 145 results for author: Garcia, F

The CMS Phase-2 Fast Beam Condition Monitor prototype test with beam

Authors: G. Auzinger, H. Bakhshiansohi, A. E. Dabrowski, A. G. Delannoy, V. Dalavi, N. Dienemann, M. Dragicevic, M. F. Garcia, M. Guthoff, B. Gyöngyösi, M. Jenihhin, Á. Kadlecsik, J. Kaplon, O. Karacheban, B. Korcsmáros, A. Lokhovitskiy, W. H. Liu, R. Loos, S. Mallows, D. Mihhailov, M. Obradovic, S. Orfanelli, M. Pari, G. Pásztor, F. L. Pereira Carneiro , et al. (18 additional authors not shown)

Abstract: The Fast Beam Condition Monitor (FBCM) is a standalone luminometer for the High Luminosity LHC (HL-LHC) program of the CMS Experiment at CERN. The detector is under development and features a new, radiation-hard, front-end application-specific integrated circuit (ASIC) designed for beam monitoring applications. The achieved timing resolution of a few nanoseconds enables the measurement of both the… ▽ More The Fast Beam Condition Monitor (FBCM) is a standalone luminometer for the High Luminosity LHC (HL-LHC) program of the CMS Experiment at CERN. The detector is under development and features a new, radiation-hard, front-end application-specific integrated circuit (ASIC) designed for beam monitoring applications. The achieved timing resolution of a few nanoseconds enables the measurement of both the luminosity and the beam-induced background. The ASIC, called FBCM23, features six channels with adjustable shaping times, enabling in-field fine-tuning. Each ASIC channel outputs a single binary asynchronous signal encoding time of arrival and time over threshold information. The FBCM is based on silicon-pad sensors, with two sensor designs presently being considered. This paper presents the results of tests of the FBCM detector prototype using both types of silicon sensors with hadron, muon, and electron beams. Irradiated FBCM23 ASICs and silicon-pad sensors were also tested to simulate the expected conditions near the end of the detector's lifetime in the HL-LHC radiation environment. Based on test results, direct bonding between the sensor and ASIC was chosen, and an optimal bias voltage and ASIC threshold for FBCM operation were proposed. The current design of the front-end test board was validated following the beam test and is now being used for the first front-end module, which is expected to be produced in summer 2025. These results represent a major step forward in validating the FBCM concept, first version of the firmware and establishing a reliable design path for the final detector. △ Less

Submitted 7 July, 2025; originally announced July 2025.

Comments: 33 pages, 32 figures, prepared for submission to JINST

On a mathematical definition of laminar and turbulent fluid flow

Authors: F. Javier Garcia Garcia, Pablo Fariñas Alvariño

Abstract: As stated in the title, the present research proposes a mathematical definition of laminar and turbulent flows, i.e., a definition that may be used to conceive and prove mathematical theorems about such flows. The definition is based on an experimental truth long known to humans: Whenever one repeats a given flow, the results will not be the same if the flow is turbulent. Turbulent flows are not s… ▽ More As stated in the title, the present research proposes a mathematical definition of laminar and turbulent flows, i.e., a definition that may be used to conceive and prove mathematical theorems about such flows. The definition is based on an experimental truth long known to humans: Whenever one repeats a given flow, the results will not be the same if the flow is turbulent. Turbulent flows are not strictly repeatable. From this basic fact follows a more elaborate truth about turbulent flows: The mean flow obtained by averaging the results of a large number of repetitions is not a natural flow, that is, it is a flow that cannot occur naturally in any experiment. The proposed definition requires some preliminary mathematical notions, which are also introduced in the text: Proximity between functions, the ensemble of realisations, the method of averaging the flows, and the distinct properties of realisations (physical flows) and averages (mean flows). The notion of restricted nonlinearity is introduced and it is demonstrated that laminar flows can only exist in conditions of restricted nonlinearity, whereas turbulent flows are a consequence of general nonlinearity. The particular case of steady-state turbulent flow is studied, and an uncertainty is raised about the equality of ensemble average and time average. Two solved examples are also offered to illustrate the meaning and methods implied by the definitions: The von Kàrmàn vortex street and a laminar flow with imposed white-noise perturbation. △ Less

Submitted 1 July, 2025; originally announced July 2025.

Comments: 26 pages, 1 figure, scientific article

MSC Class: 76D05; 76D06; 76F55

Photonics in Flatland: Challenges and Opportunities for Nanophotonics with 2D Semiconductors

Authors: Ali Azimi, Julien Barrier, Angela Barreda, Thomas Bauer, Farzaneh Bouzari, Abel Brokkelkamp, Francesco Buatier de Mongeot, Timothy Parsons, Peter Christianen, Sonia Conesa-Boj, Alberto G. Curto, Suprova Das, Bernardo Dias, Itai Epstein, Zlata Fedorova, F. Javier García de Abajo, Ilya Goykhman, Lara Greten, Johanna Grönqvist, Ludovica Guarneri, Yujie Guo, Tom Hoekstra, Xuerong Hu, Benjamin Laudert, Jason Lynch , et al. (23 additional authors not shown)

Abstract: Two-dimensional (2D) semiconductors are emerging as a versatile platform for nanophotonics, offering unprecedented tunability in optical properties through exciton resonance engineering, van der Waals heterostructuring, and external field control. These materials enable active optical modulation, single-photon emission, quantum photonics, and valleytronic functionalities, paving the way for next-g… ▽ More Two-dimensional (2D) semiconductors are emerging as a versatile platform for nanophotonics, offering unprecedented tunability in optical properties through exciton resonance engineering, van der Waals heterostructuring, and external field control. These materials enable active optical modulation, single-photon emission, quantum photonics, and valleytronic functionalities, paving the way for next-generation optoelectronic and quantum photonic devices. However, key challenges remain in achieving large-area integration, maintaining excitonic coherence, and optimizing amplitude-phase modulation for efficient light manipulation. Advances in fabrication, strain engineering, and computational modelling will be crucial to overcoming these limitations. This perspective highlights recent progress in 2D semiconductor-based nanophotonics, emphasizing opportunities for scalable integration into photonics. △ Less

Submitted 30 June, 2025; originally announced July 2025.

Comments: 39 pages, 7 figures

Operation of the Trigger System for the ICARUS Detector at Fermilab

Authors: ICARUS collaboration, F. Abd Alrahman, P. Abratenko, N. Abrego-Martinez, A. Aduszkiewicz, F. Akbar, L. Aliaga Soplin, J. Asaadi, W. F. Badgett, F. Battisti, V. Bellini, R. Benocci, J. Berger, S. Berkman, S. Bertolucci, M. Betancourt, A. Blanchet, F. Boffelli, M. Bonesini, T. Boone, B. Bottino, A. Braggiotti, D. Brailsford, S. J. Brice, V. Brio , et al. (160 additional authors not shown)

Abstract: The ICARUS liquid argon TPC detector is taking data on the Booster (BNB) and Main Injector (NuMI) Neutrino beam lines at Fermilab with a trigger system based on the scintillation light produced by charged particles in coincidence with the proton beam extraction from the accelerators. The architecture and the deployment of the trigger system in the first two runs for physics are presented, as well… ▽ More The ICARUS liquid argon TPC detector is taking data on the Booster (BNB) and Main Injector (NuMI) Neutrino beam lines at Fermilab with a trigger system based on the scintillation light produced by charged particles in coincidence with the proton beam extraction from the accelerators. The architecture and the deployment of the trigger system in the first two runs for physics are presented, as well as the triggered event rates. The event recognition efficiency has been evaluated as a function of the deposited energy and the position of cosmic muons stopping inside the detector. △ Less

Submitted 25 June, 2025; originally announced June 2025.

Comments: 21 pages, 16 figures

Report number: Fermilab PUB-25-0393-PPD

Exploring Seismic Signal Detection and Source Identification of Atmospheric Entries: The Hayabusa2 Sample Return Capsule as a Benchmark

Authors: Iona Clemente, Eleanor K. Sansom, Hadrien A. R. Devillepoix, Taichi Kawamura, Benjamin A. Fernando, Raphael F. Garcia, Olivia Collet

Abstract: This exploratory study investigates whether seismic signals can be used to infer fragmentation during a fireball event. Re-entry objects, particularly sample return capsules (SRCs) such as the one from the Hayabusa2 mission, behave similarly to slow meteors during atmospheric entry and provide valuable insights into natural fireball events. In this study, we initially analyse seismic signals from… ▽ More This exploratory study investigates whether seismic signals can be used to infer fragmentation during a fireball event. Re-entry objects, particularly sample return capsules (SRCs) such as the one from the Hayabusa2 mission, behave similarly to slow meteors during atmospheric entry and provide valuable insights into natural fireball events. In this study, we initially analyse seismic signals from the Hayabusa2 SRC re-entry, which took place on December 5, 2020, over South Australia. The SRC's signature was captured by a dense network of seismic stations (Eakin, 2018; O'Donnell et al., 2020), offering a unique opportunity to investigate the signals' characteristics and verify their connection to the re-entry event. The ballistic trajectory was confirmed as the source shock mechanism for this event. We isolate this signal and use it as a reference for a ballistic shock signature and compare it to three other fireball case studies, including a suborbital re-entry and two natural meteoroids. Although factors such as local geology and atmospheric conditions were not considered in this preliminary study, our results show promise, with high correlations for events with purely ballistic trajectories and lower correlations for those involving fragmentation or airbursts. This implies that seismic data may be able to disambiguate whether any particular fireball event underwent significant fragmentation or airburst, key phenomena for assessing body strengths. △ Less

Submitted 21 May, 2025; originally announced May 2025.

Enhanced ammonia electro-oxidation reaction on platinum-iron oxide catalyst assisted by MagnetoElectroCatalysis

Authors: Caio Machado Fernandes, Eduardo M. Rodrigues, Odivaldo C. Alves, Flavio Garcia, Yutao Xing, Mauro C. Santos, Julio Cesar M. Silva

Abstract: Ammonia poses significant environmental challenges due to its role in water pollution, contributing to eutrophication and several detrimental environmental and ecological issues. Addressing the efficient removal or conversion of ammonia is, therefore, critical. Among various methods, the ammonia electro-oxidation reaction stands out due to its potential for direct energy conversion and environment… ▽ More Ammonia poses significant environmental challenges due to its role in water pollution, contributing to eutrophication and several detrimental environmental and ecological issues. Addressing the efficient removal or conversion of ammonia is, therefore, critical. Among various methods, the ammonia electro-oxidation reaction stands out due to its potential for direct energy conversion and environment remediation. Here, we synthesize platinum-iron oxide magnetic nanoparticles (Pt-MNP) as electrocatalysts and apply an alternating magnetic field (AMF) to enhance their activity.. The AMF generates localized heat via Néel relaxation, accelerating ammonia oxidation kinetics at the catalytic surface.. Compared to conventional electro-oxidation methods, this technique demonstrates superior efficiency and stability, offering a promising alternative for ammonia treatment. This work uses the concept of MagnetoElectroCatalysis, showcasing the synergy between magnetic fields and the electrochemical process, leveraging the AMF to induce localized heating within the nanocatalyst, thereby improving its catalytic activity as shown in cyclic voltammetry and chronoamperometry experiments. By combining nanocatalyst design with innovative AMF application, this study provides a new avenue for enhancing electrochemical reactions, with broad implications for environmental remediation and sustainable energy solutions. △ Less

Submitted 19 May, 2025; originally announced May 2025.

Magnetically Enhanced Fenton-Like Processes by Nanofibers: Real-Time Observation of Tetracycline Degradation in Pig Manure Wastewater

Authors: Berta Centro Elía, Marco Antonio Morales, Vanina G. Franco, Jesús Antonio Fuentes García, Gerardo F. Goya

Abstract: This study presents a novel approach for the degradation of tetracycline (TC) in pig manure wastewater using magnet-ite-based magnetic nanofibers (MNFs) as heterogeneous Fenton-like catalysts. The MNFs, composed of polyacrylonitrile (PAN) embedded with MnFe_2O_4 nanoparticles, were synthesized via electrospinning and exhibited high stability and catalytic efficiency. The degradation process was dr… ▽ More This study presents a novel approach for the degradation of tetracycline (TC) in pig manure wastewater using magnet-ite-based magnetic nanofibers (MNFs) as heterogeneous Fenton-like catalysts. The MNFs, composed of polyacrylonitrile (PAN) embedded with MnFe_2O_4 nanoparticles, were synthesized via electrospinning and exhibited high stability and catalytic efficiency. The degradation process was driven by hydroxyl radical (OH) formation through hydrogen peroxide (H2O2) activation on the MNF surface. The results showed that TC was first adsorbed onto the MNFs before undergoing oxidation, with treatment efficiency increasing with H2O2 concentration up to an optimum point, due to increased OH scavenging by H_2O_2. A heterogeneous dynamic kinetic model (DKM) was developed to describe the degradation mechanism, incorporating reactive oxygen species (ROS) generation, catalyst surface inactivation, and polymer strip-ping effects. Furthermore, the application of an alternating magnetic field significantly accelerated the reaction rate, likely due to localized heating effects. This study highlights the potential of MNFs as a scalable, reusable and efficient alternative for antibiotic-contaminated wastewater treatment, offering advantages over conventional homogeneous Fenton processes by minimizing iron sludge formation and broadening the operational pH range. △ Less

Submitted 25 April, 2025; originally announced April 2025.

Comments: 16 pages, 12 figures

Investigating irradiation effects and space charge sign inversion in n-type Low Gain Avalanche Detectors

Authors: Veronika Kraus, Margarita Biveinytė, Marcos Fernandez Garcia, Salvador Hidalgo, Michael Moll, Jairo Villegas, Moritz Wiehe

Abstract: Low Gain Avalanche Detectors built on n-type substrate (nLGADs) have been developed by IMB-CNM to enhance the detection of low-penetrating particles, with a wide range of applications from medicine, industry to synergies with developments for high-energy physics (HEP). In this work, irradiation effects on nLGADs were investigated through proton irradiation at the CERN PS-IRRAD facility up to proto… ▽ More Low Gain Avalanche Detectors built on n-type substrate (nLGADs) have been developed by IMB-CNM to enhance the detection of low-penetrating particles, with a wide range of applications from medicine, industry to synergies with developments for high-energy physics (HEP). In this work, irradiation effects on nLGADs were investigated through proton irradiation at the CERN PS-IRRAD facility up to proton fluences of $10^{14}\,\mathrm{cm}^{-2}$. Electrical characterization before and after irradiation reveals space charge sign inversion of the n-type bulk, leading to significant modifications in the depletion behavior and electric field distribution. Utilizing UV TCT and TPA-TCT measurements, the impact of irradiation on the electric fields and the gain are studied in more detail, confirming a change of sensor depletion and a reduced electric field in the gain layer. The results suggest that donor removal in nLGADs is stronger pronounced already at lower fluences compared to acceptor removal in traditional p-type LGADs. These findings provide not only first insights into the effects of irradiation on nLGADs but also contribute to the development of methods to quantify the donor removal. △ Less

Submitted 9 April, 2025; v1 submitted 4 April, 2025; originally announced April 2025.

Comments: 4 pages, 3 figures, prepared for the proceedings of the Vienna Conference on Instrumentation as a special issue of Nuclear Instruments & Methods in Physics Research, Section A. Updated acknowledgments

Roadmap for Quantum Nanophotonics with Free Electrons

Authors: F. Javier García de Abajo, Albert Polman, Cruz I. Velasco, Mathieu Kociak, Luiz H. G. Tizei, Odile Stéphan, Sophie Meuret, Takumi Sannomiya, Keiichirou Akiba, Yves Auad, Armin Feist, Claus Ropers, Peter Baum, John H. Gaida, Murat Sivis, Hugo Lourenço-Martins, Luca Serafini, Johan Verbeeck, Beatrice Matilde Ferrari, Cameron J. R. Duncan, Maria Giulia Bravi, Irene Ostroman, Giovanni Maria Vanacore, Andrea Konečná, Nahid Talebi , et al. (22 additional authors not shown)

Abstract: Over the past century, continuous advancements in electron microscopy have enabled the synthesis, control, and characterization of high-quality free-electron beams. These probes carry an evanescent electromagnetic field that can drive localized excitations and provide high-resolution information on material structures and their optical responses, currently reaching the sub-ångström and few-meV reg… ▽ More Over the past century, continuous advancements in electron microscopy have enabled the synthesis, control, and characterization of high-quality free-electron beams. These probes carry an evanescent electromagnetic field that can drive localized excitations and provide high-resolution information on material structures and their optical responses, currently reaching the sub-ångström and few-meV regime. Moreover, combining free electrons with pulsed light sources in ultrafast electron microscopy adds temporal resolution in the sub-femtosecond range while offering enhanced control of the electron wave function. Beyond their exceptional capabilities for time-resolved spectromicroscopy, free electrons are emerging as powerful tools in quantum nanophotonics, on par with photons in their ability to carry and transfer quantum information, create entanglement within and with a specimen, and reveal previously inaccessible details on nanoscale quantum phenomena. This Roadmap outlines the current state of this rapidly evolving field, highlights key challenges and opportunities, and discusses future directions through a collection of topical sections prepared by leading experts. △ Less

Submitted 28 May, 2025; v1 submitted 18 March, 2025; originally announced March 2025.

Embedding the Timepix4 in Micro-Pattern Gaseous Detectors

Authors: L. Scharenberg, J. Alozy, W. Billereau, F. Brunbauer, M. Campbell, P. Carbonez, K. J. Flöthner, F. Garcia, A. Garcia-Tejedor, T. Genetay, K. Heijhoff, D. Janssens, S. Kaufmann, M. Lisowska, X. Llopart, M. Mager, B. Mehl, H. Muller, R. de Oliveira, E. Oliveri, G. Orlandini, D. Pfeiffer, F. Piernas Diaz, A. Rodrigues, L. Ropelewski , et al. (5 additional authors not shown)

Abstract: The combination of Micro-Pattern Gaseous Detectors (MPGDs) and pixel charge readout enables specific experimental opportunities. Using the Timepix4 for the readout is advantageous because of its size (around 7 cm^2 active area) and its Through Silicon Vias. The latter enables to connect to the Timepix4 from the back side. Thus, it can be tiled on four sides, allowing it to cover large areas withou… ▽ More The combination of Micro-Pattern Gaseous Detectors (MPGDs) and pixel charge readout enables specific experimental opportunities. Using the Timepix4 for the readout is advantageous because of its size (around 7 cm^2 active area) and its Through Silicon Vias. The latter enables to connect to the Timepix4 from the back side. Thus, it can be tiled on four sides, allowing it to cover large areas without loss of active area. Here, the first results of reading out MPGDs with the Timepix4 are presented. Measurements with a Gas Electron Multiplier (GEM) detector show that event selection based on geometrical parameters of the interaction is possible, X-ray imaging studies can be performed, as well as energy and time-resolved measurements. In parallel, the embedding of a Timepix4 into a micro-resistive Well (uRWell) amplification structure is explored. The first mechanical tests have been successful. The status of the electrical functionality is presented, as well as simulation studies on the signal induction in such a device. △ Less

Submitted 16 March, 2025; originally announced March 2025.

Drift time calibration of the ultra-low material budget GEM-based TPC for MIXE

Authors: X. Zhao, M. W. Heiss, F. Garcia, B. J. Zeh, I. Briki, K. J. Flöthner, G. Janka, L. Scharenberg, B. Banto-Oberhauser, H. Müller, S. Biswas, T. Prokscha, A. Amato

Abstract: Muon-Induced X-ray Emission (MIXE) is a non-destructive analytical technique that leverages negative muons to probe elemental and isotopic compositions by detecting characteristic muonic X-rays emitted during atomic cascades and gamma rays from nuclear capture processes. By controlling the muon beam momentum, MIXE enables depth-resolved analysis, spanning microns to centimeters, making it ideal fo… ▽ More Muon-Induced X-ray Emission (MIXE) is a non-destructive analytical technique that leverages negative muons to probe elemental and isotopic compositions by detecting characteristic muonic X-rays emitted during atomic cascades and gamma rays from nuclear capture processes. By controlling the muon beam momentum, MIXE enables depth-resolved analysis, spanning microns to centimeters, making it ideal for studying compositional variations in fragile, valuable, or operando samples. To enhance its capabilities, we integrated a twin Time Projection Chamber (TPC) tracker with Gas Electron Multiplier (GEM) amplification stages, allowing precise measurement of muon trajectories. A custom-built fiber detector with scintillating fibers and a Silicon Photomultiplier (SiPM) provides permille-level accuracy in drift velocity calibration, essential for accurate spatial reconstruction. This advanced setup correlates muon stopping points with X-ray emissions, paving the way towards element-sensitive imaging and establishing MIXE as a unique tool for high-resolution, depth-specific elemental analysis across diverse scientific applications. △ Less

Submitted 24 May, 2025; v1 submitted 17 January, 2025; originally announced January 2025.

Comments: 5 pages, 5 figures, conference proceeding MPGD2024

Application of the VMM3a/SRS: A t0-less TWIN GEM-based TPC

Authors: K. J. Flöthner, F. Garcia, B. Oberhauser, F. Brunbauer, M. W. Heiss, D. Janssens, B. Ketzer, M. Lisowska, M. Meurer, H. Muller, E. Oliveri, G. Orlandini, D. Pfeiffer, L. Ropelewsk, J. Samarati, F. Sauli, L. Scharenberg, M. van Stenis, A. Utrobicic, R. Veenhof

Abstract: Integrating the ATLAS/BNL VMM3a ASIC (Application Specific Integrated Circuit) into the RD51/SRS (Scalable Readout System) provides a self-triggered continuous readout system for various gaseous detectors. Since the system allows flexible parameters, such as switching the polarity, adjusting electronics gain or different peaking times, the settings can be adjusted for a wide range of detectors. Th… ▽ More Integrating the ATLAS/BNL VMM3a ASIC (Application Specific Integrated Circuit) into the RD51/SRS (Scalable Readout System) provides a self-triggered continuous readout system for various gaseous detectors. Since the system allows flexible parameters, such as switching the polarity, adjusting electronics gain or different peaking times, the settings can be adjusted for a wide range of detectors. The system allows particles to be recorded with a MHz interaction rate in energy, space, and time. The system will be introduced in the beginning, and short examples will be given for different applications. After, the Twin GEM TPC will be discussed in more detail to show the benefits of such a trigger-less system in combination with the Twin configuration. Last, a few results for the tracking performance and the possibility to operate as a tracking telescope will be shown. Thus, this presents the possibility of an extremely low material budget tracking system suitable for tracking from high to low-energy particle beams. △ Less

Submitted 17 January, 2025; originally announced January 2025.

Relativistic electron energy-loss spectroscopy in cylindrical waveguides and holes

Authors: Álvaro Rodríguez Echarri, Wenhua Zhao, Kurt Busch, F. Javier García de Abajo

Abstract: Swift electrons passing near or through metallic structures have proven to be an excellent tool for studying plasmons and other types of confined optical modes involving collective charge oscillations in the materials hybridized with electromagnetic fields. In this work, we provide a general analytical framework for the simulation of electron energy-loss spectroscopy (EELS) in infinite systems wit… ▽ More Swift electrons passing near or through metallic structures have proven to be an excellent tool for studying plasmons and other types of confined optical modes involving collective charge oscillations in the materials hybridized with electromagnetic fields. In this work, we provide a general analytical framework for the simulation of electron energy-loss spectroscopy (EELS) in infinite systems with cylindrical symmetry, such as wires, holes, and optical fibers. While EELS theory is well developed for electrons moving parallel to the direction of translational symmetry, we introduce closed-form analytical solutions for perpendicular electron trajectories. These analytical results are corroborated by comparison to numerical simulations based on a frequency-domain boundary-element method and a discontinuous-Galerkin time-domain finite-element method. Numerical methods further allow us to study termination effects in finite-sized cylindrical objects such as nanorods. The present study of the interaction between free electrons and cylindrically symmetric photonics systems can find application in the analysis of EELS spectra and the design of free-electron--photonic hybrid systems. △ Less

Submitted 16 January, 2025; originally announced January 2025.

The Ultra-Low material budget GEM based TPC for tracking with VMM3a readout

Authors: F. Garcia, K. J. Flöthner, A. Amato, S. Biswas, F. M. Brunbauer, M. W. Heiss, G. Janka, D. Janssens, M. Lisowska, M. Meurer, H. Muller, B. Banto Oberhauser, E. Oliveri, G. Orlandini, D. Pfeiffer, T. Prokscha, L. Ropelewski, L. Scharenberg, J. Samarati, F. Sauli, M. van Stenis, R. Veenhof, B. Zeh, X. Zhao

Abstract: The Gaseous Electron Multiplier-based Time Projection Chamber (GEM-TPC) in TWIN configuration for particle tracking has been consolidated after extensive investigations in different facilities to study its tracking performance. The most attractive feature of this detector is its ultra-low material budget, which is 0.28\% X/X$_0$ and can be further reduced by decreasing the thickness of the gas tra… ▽ More The Gaseous Electron Multiplier-based Time Projection Chamber (GEM-TPC) in TWIN configuration for particle tracking has been consolidated after extensive investigations in different facilities to study its tracking performance. The most attractive feature of this detector is its ultra-low material budget, which is 0.28\% X/X$_0$ and can be further reduced by decreasing the thickness of the gas traversed by the incident particles. Thus, it provides excellent position reconstruction and reduced multi-scattering. This detector consists of two GEM-TPCs with drift fields in opposite directions, achieved by rotating one 180 degrees in the middle plane with respect to the other. These two GEM-TPCs share the same gas volume, i.e., inside a single vessel. This configuration is called a TWIN configuration. The results presented in this work were measured using the newly integrated VMM3a/SRS readout electronics, an important milestone in improving overall performance and capabilities. In 2024, this detector was tested at the H4 beamline of the SPS at CERN, using muons and pions and with different gas mixtures like, for instance: Ar/CO$_2$ (70/30 \%), He/CO$_2$ (70/30 \%) and He/CO$_2$ (90/10 \%). The helium-based mixtures were used to commission the detector to track low momenta muons required in the PSI muon-induced X-ray emission (MIXE) experiment. The results obtained from these measurements, a brief discussion of the methodology used for the data analysis, and a comparison of the spatial resolution for different gas mixtures will be presented. △ Less

Submitted 18 March, 2025; v1 submitted 16 January, 2025; originally announced January 2025.

Comments: 5 pages, 5 figures

PICOSEC Micromegas Precise-timing Detectors: Development towards Large-Area and Integration

Authors: Y. Meng, R. Aleksan, Y. Angelis, J. Bortfeld, F. Brunbauer, M. Brunoldi, E. Chatzianagnostou, J. Datt, K. Degmelt, G. Fanourakis, D. Fiorina, K. J. Floethner, M. Gallinaro, F. Garcia, I. Giomataris, K. Gnanvo, F. J. Iguaz, D. Janssens, A. Kallitsopoulou, M. Kovacic, B. Kross, P. Legou, Z. Li, M. Lisowska, J. Liu , et al. (27 additional authors not shown)

Abstract: PICOSEC Micromegas (MM) is a precise timing gaseous detector based on a Cherenkov radiator coupled with a semi-transparent photocathode and an MM amplifying structure. The detector conceprt was successfully demonstrated through a single-channel prototype, achieving sub-25 ps time resolution with Minimum Ionizing Particles (MIPs). A series of studies followed, aimed at developing robust, large-area… ▽ More PICOSEC Micromegas (MM) is a precise timing gaseous detector based on a Cherenkov radiator coupled with a semi-transparent photocathode and an MM amplifying structure. The detector conceprt was successfully demonstrated through a single-channel prototype, achieving sub-25 ps time resolution with Minimum Ionizing Particles (MIPs). A series of studies followed, aimed at developing robust, large-area, and scalable detectors with high time resolution, complemented by specialized fast-response readout electronics. This work presents recent advancements towards large-area resistive PICOSEC MM, including 10 $\times$ 10 $\text{cm}^2$ area prototypes and a 20 $\times$ 20 $\text{cm}^2$ prototype, which features the jointing of four photocathodes. The time resolution of these detector prototypes was tested during the test beam, achieved a timing performance of around 25 ps for individual pads in MIPs. Meanwhile, customized electronics have been developed dedicated to the high-precision time measurement of the large-area PICOSEC MM. The performance of the entire system was evaluated during the test beam, demonstrating its capability for large-area integration. These advancements highlight the potential of PICOSEC MM to meet the stringent requirements of future particle physics experiments. △ Less

Submitted 9 January, 2025; originally announced January 2025.

Towards MPGDs with embedded pixel ASICs

Authors: L. Scharenberg, J. Alozy, W. Billereau, F. Brunbauer, M. Campbell, P. Carbonez, K. J. Flöthner, F. Garcia, A. Garcia-Tejedor, T. Genetay, K. Heijhoff, D. Janssens, S. Kaufmann, M. Lisowska, X. Llopart, M. Mager, B. Mehl, H. Muller, R. de Oliveira, E. Oliveri, G. Orlandini, D. Pfeiffer, F. Piernas Diaz, A. Rodrigues, L. Ropelewski , et al. (5 additional authors not shown)

Abstract: Combining gaseous detectors with a high-granularity pixelated charge readout enables experimental applications which otherwise could not be achieved. This includes high-resolution tracking of low-energetic particles, requiring ultra-low material budget, X-ray polarimetry at low energies ($\lessapprox$ 2 keV) or rare-event searches which profit from event selection based on geometrical parameters.… ▽ More Combining gaseous detectors with a high-granularity pixelated charge readout enables experimental applications which otherwise could not be achieved. This includes high-resolution tracking of low-energetic particles, requiring ultra-low material budget, X-ray polarimetry at low energies ($\lessapprox$ 2 keV) or rare-event searches which profit from event selection based on geometrical parameters. In this article, the idea of embedding a pixel ASIC - specifically the Timepix4 - into a micro-pattern gaseous amplification stage is illustrated. Furthermore, the first results of reading out a triple-GEM detector with the Timepix4 (GEMPix4) are shown, including the first X-ray images taken with a Timepix4 utilising Through Silicon Vias (TSVs). Lastly, a new readout concept is presented, called the 'Silicon Readout Board', extending the use of pixel ASICs to read out gaseous detectors to a wider range of HEP applications. △ Less

Submitted 22 December, 2024; originally announced December 2024.

TCAD Simulation of Two Photon Absorption -- Transient Current Technique measurements on Silicon Detectors and LGADs

Authors: Sebastian Pape, Michael Moll, Marcos Fernández García, Moritz Wiehe

Abstract: Device simulation plays a crucial role in complementing experimental device characterisation by enabling deeper understanding of internal physical processes. However, for simulations to be trusted, experimental validation is essential to confirm the accuracy of the conclusions drawn.In the framework of semiconductor detector characterisation, one powerful tool for such validation is the Two Photon… ▽ More Device simulation plays a crucial role in complementing experimental device characterisation by enabling deeper understanding of internal physical processes. However, for simulations to be trusted, experimental validation is essential to confirm the accuracy of the conclusions drawn.In the framework of semiconductor detector characterisation, one powerful tool for such validation is the Two Photon Absorption - Transient Current Technique (TPA-TCT), which allows for highly precise, three-dimensional spatially-resolved characterisation of semiconductor detectors. In this work, the TCAD framework Synopsys Sentaurus is used to simulate depth-resolved TPA-TCT data for both p-type pad detectors (PINs) and Low Gain Avalanche Detectors (LGADs). The simulated data are compared against experimentally measured TPA-TCT results. Through this comparison, it is demonstrated that TCAD simulations can reproduce the TPA-TCT measurements, providing valuable insights into the TPA-TCT itself. Another significant outcome of this study is the successful simulation of the gain reduction mechanism, which can be observed in LGADs with increasing densities of excess charge carriers. This effect is demonstrated in an p-type LGAD with a thickness of approximately 286 um. The results confirm the ability of TCAD to model the complex interaction between carrier dynamics and device gain. △ Less

Submitted 12 December, 2024; originally announced December 2024.

Comments: 12 pages, 9 figures

PICOSEC-Micromegas Detector, an innovative solution for Lepton Time Tagging

Authors: A. Kallitsopoulou, R. Aleksan, Y. Angelis, S. Aune, J. Bortfeldt, F. Brunbauer, M. Brunoldi, E. Chatzianagnostou, J. Datta, D. Desforge, G. Fanourakis, D. Fiorina, K. J. Floethner, M. Gallinaro, F. Garcia, I. Giomataris, K. Gnanvo, F. J. Iguaz, D. Janssens, M. Kovacic, B. Kross, P. Legou, M. Lisowska, J. Liu, M. Lupberger , et al. (27 additional authors not shown)

Abstract: The PICOSEC-Micromegas (PICOSEC-MM) detector is a novel gaseous detector designed for precise timing resolution in experimental measurements. It eliminates time jitter from charged particles in ionization gaps by using extreme UV Cherenkov light emitted in a crystal, detected by a Micromegas photodetector with an appropriate photocathode. The first single-channel prototype tested in 150 GeV/c muon… ▽ More The PICOSEC-Micromegas (PICOSEC-MM) detector is a novel gaseous detector designed for precise timing resolution in experimental measurements. It eliminates time jitter from charged particles in ionization gaps by using extreme UV Cherenkov light emitted in a crystal, detected by a Micromegas photodetector with an appropriate photocathode. The first single-channel prototype tested in 150 GeV/c muon beams achieved a timing resolution below 25 ps, a significant improvement compared to standard Micropattern Gaseous Detectors (MPGDs). This work explores the specifications for applying these detectors in monitored neutrino beams for the ENUBET Project. Key aspects include exploring resistive technologies, resilient photocathodes, and scalable electronics. New 7-pad resistive detectors are designed to handle the particle flux. In this paper, two potential scenarios are briefly considered: tagging electromagnetic showers with a timing resolution below 30 ps in an electromagnetic calorimeter as well as individual particles (mainly muons) with about 20 ps respectively. △ Less

Submitted 29 October, 2024; originally announced November 2024.

Journal ref: Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment,1069,169920,2024

Rydberg-atom manipulation through strong interaction with free electrons

Authors: Adamantios P. Synanidis, P. A. D. Gonçalves, F. Javier García de Abajo

Abstract: Optically trapped Rydberg atoms are a suitable platform to explore quantum many-body physics mediated by long-range atom--atom interactions that can be engineered through externally applied light fields. However, this approach is limited to dipole-allowed transitions and a spatial resolution of the order of the optical wavelength. Here, we theoretically investigate the interaction between free ele… ▽ More Optically trapped Rydberg atoms are a suitable platform to explore quantum many-body physics mediated by long-range atom--atom interactions that can be engineered through externally applied light fields. However, this approach is limited to dipole-allowed transitions and a spatial resolution of the order of the optical wavelength. Here, we theoretically investigate the interaction between free electrons and individual Rydberg atoms as an approach to induce nondipolar transitions with subnanometer spatial precision and a substantial degree of control over the final atomic states. We observe unity-order excitation probabilities produced by a single electron for suitably chosen combinations of electron energies and electron-beam distance to the atom. We further discuss electron--atom entanglement in combination with lateral shaping of the electron followed by postselection. Our results support free electrons as powerful tools to manipulate Rydberg atoms in previously inaccessible ways. △ Less

Submitted 27 September, 2024; originally announced September 2024.

Comments: 10 pages, 8 figures, 73 references

Journal ref: ACS Nano 2025

Angular dependent measurement of electron-ion recombination in liquid argon for ionization calorimetry in the ICARUS liquid argon time projection chamber

Authors: ICARUS collaboration, P. Abratenko, N. Abrego-Martinez, A. Aduszkiewic, F. Akbar, L. Aliaga Soplin, M. Artero Pons, J. Asaadi, W. F. Badgett, B. Baibussinov, B. Behera, V. Bellini, R. Benocci, J. Berger, S. Berkman, S. Bertolucci, M. Betancourt, M. Bonesini, T. Boone, B. Bottino, A. Braggiotti, D. Brailsford, S. J. Brice, V. Brio, C. Brizzolari , et al. (156 additional authors not shown)

Abstract: This paper reports on a measurement of electron-ion recombination in liquid argon in the ICARUS liquid argon time projection chamber (LArTPC). A clear dependence of recombination on the angle of the ionizing particle track relative to the drift electric field is observed. An ellipsoid modified box (EMB) model of recombination describes the data across all measured angles. These measurements are us… ▽ More This paper reports on a measurement of electron-ion recombination in liquid argon in the ICARUS liquid argon time projection chamber (LArTPC). A clear dependence of recombination on the angle of the ionizing particle track relative to the drift electric field is observed. An ellipsoid modified box (EMB) model of recombination describes the data across all measured angles. These measurements are used for the calorimetric energy scale calibration of the ICARUS TPC, which is also presented. The impact of the EMB model is studied on calorimetric particle identification, as well as muon and proton energy measurements. Accounting for the angular dependence in EMB recombination improves the accuracy and precision of these measurements. △ Less

Submitted 9 August, 2024; v1 submitted 17 July, 2024; originally announced July 2024.

Report number: FERMILAB-PUB-24-0332-PPD

Journal ref: JINST 20 P01033 (2025)

Calibration and simulation of ionization signal and electronics noise in the ICARUS liquid argon time projection chamber

Authors: ICARUS collaboration, P. Abratenko, N. Abrego-Martinez, A. Aduszkiewic, F. Akbar, L. Aliaga Soplin, M. Artero Pons, J. Asaadi, W. F. Badgett, B. Baibussinov, B. Behera, V. Bellini, R. Benocci, J. Berger, S. Berkman, S. Bertolucci, M. Betancourt, M. Bonesini, T. Boone, B. Bottino, A. Braggiotti, D. Brailsford, S. J. Brice, V. Brio, C. Brizzolari , et al. (156 additional authors not shown)

Abstract: The ICARUS liquid argon time projection chamber (LArTPC) neutrino detector has been taking physics data since 2022 as part of the Short-Baseline Neutrino (SBN) Program. This paper details the equalization of the response to charge in the ICARUS time projection chamber (TPC), as well as data-driven tuning of the simulation of ionization charge signals and electronics noise. The equalization procedu… ▽ More The ICARUS liquid argon time projection chamber (LArTPC) neutrino detector has been taking physics data since 2022 as part of the Short-Baseline Neutrino (SBN) Program. This paper details the equalization of the response to charge in the ICARUS time projection chamber (TPC), as well as data-driven tuning of the simulation of ionization charge signals and electronics noise. The equalization procedure removes non-uniformities in the ICARUS TPC response to charge in space and time. This work leverages the copious number of cosmic ray muons available to ICARUS at the surface. The ionization signal shape simulation applies a novel procedure that tunes the simulation to match what is measured in data. The end result of the equalization procedure and simulation tuning allows for a comparison of charge measurements in ICARUS between Monte Carlo simulation and data, showing good performance with minimal residual bias between the two. △ Less

Submitted 5 August, 2024; v1 submitted 16 July, 2024; originally announced July 2024.

Report number: FERMILAB-PUB-24-0330-PPD

Machine learning accelerated prediction of Ce-based ternary compounds involving antagonistic pairs

Authors: Weiyi Xia, Wei-Shen Tee, Paul C. Canfield, Fernando Assis Garcia, Raquel D Ribeiro, Yongbin Lee, Liqin Ke, Rebecca Flint, Cai-Zhuang Wang

Abstract: The discovery of novel quantum materials within ternary phase spaces containing antagonistic pair such as Fe with Bi, Pb, In, and Ag, presents significant challenges yet holds great potential. In this work, we investigate the stabilization of these immiscible pairs through the integration of Cerium (Ce), an abundant rare-earth and cost-effective element. By employing a machine learning (ML)-guided… ▽ More The discovery of novel quantum materials within ternary phase spaces containing antagonistic pair such as Fe with Bi, Pb, In, and Ag, presents significant challenges yet holds great potential. In this work, we investigate the stabilization of these immiscible pairs through the integration of Cerium (Ce), an abundant rare-earth and cost-effective element. By employing a machine learning (ML)-guided framework, particularly crystal graph convolutional neural networks (CGCNN), combined with first-principles calculations, we efficiently explore the composition/structure space and predict 9 stable and 37 metastable Ce-Fe-X (X=Bi, Pb, In and Ag) ternary compounds. Our findings include the identification of multiple new stable and metastable phases, which are evaluated for their structural and energetic properties. These discoveries not only contribute to the advancement of quantum materials but also offer viable alternatives to critical rare earth elements, underscoring the importance of Ce-based intermetallic compounds in technological applications. △ Less

Submitted 17 February, 2025; v1 submitted 15 July, 2024; originally announced July 2024.

Photocathode characterisation for robust PICOSEC Micromegas precise-timing detectors

Authors: M. Lisowska, R. Aleksan, Y. Angelis, S. Aune, J. Bortfeldt, F. Brunbauer, M. Brunoldi, E. Chatzianagnostou, J. Datta, K. Dehmelt, G. Fanourakis, S. Ferry, D. Fiorina, K. J. Floethner, M. Gallinaro, F. Garcia, I. Giomataris, K. Gnanvo, F. J. Iguaz, D. Janssens, A. Kallitsopoulou, M. Kovacic, B. Kross, C. C. Lai, P. Legou , et al. (33 additional authors not shown)

Abstract: The PICOSEC Micromegas detector is a~precise-timing gaseous detector based on a~Cherenkov radiator coupled with a~semi-transparent photocathode and a~Micromegas amplifying structure, targeting a~time resolution of tens of picoseconds for minimum ionising particles. Initial single-pad prototypes have demonstrated a~time resolution below 25 ps, prompting ongoing developments to adapt the concept for… ▽ More The PICOSEC Micromegas detector is a~precise-timing gaseous detector based on a~Cherenkov radiator coupled with a~semi-transparent photocathode and a~Micromegas amplifying structure, targeting a~time resolution of tens of picoseconds for minimum ionising particles. Initial single-pad prototypes have demonstrated a~time resolution below 25 ps, prompting ongoing developments to adapt the concept for High Energy Physics applications, where sub-nanosecond precision is essential for event separation, improved track reconstruction and particle identification. The achieved performance is being transferred to robust multi-channel detector modules suitable for large-area detection systems requiring excellent timing precision. To enhance the robustness and stability of the PICOSEC Micromegas detector, research on robust carbon-based photocathodes, including Diamond-Like Carbon (DLC) and Boron Carbide (B4C), is pursued. Results from prototypes equipped with DLC and B4C photocathodes exhibited a~time resolution of approximately 32 ps and 34.5 ps, respectively. Efforts dedicated to improve detector robustness and stability enhance the feasibility of the PICOSEC Micromegas concept for large experiments, ensuring sustained performance while maintaining excellent timing precision. △ Less

Submitted 9 December, 2024; v1 submitted 13 July, 2024; originally announced July 2024.

Free-electron coupling to surface polaritons mediated by small scatterers

Authors: Leila Prelat, Eduardo J. C. Dias, F. Javier García de Abajo

Abstract: The ability of surface polaritons (SPs) to enhance and manipulate light fields down to deep-subwavelength length scales enables applications in optical sensing and nonlinear optics at the nanoscale. However, the wavelength mismatch between light and SPs prevents direct optical excitation of surface-bound modes, thereby limiting the widespread development of SP-based photonics. Free electrons are a… ▽ More The ability of surface polaritons (SPs) to enhance and manipulate light fields down to deep-subwavelength length scales enables applications in optical sensing and nonlinear optics at the nanoscale. However, the wavelength mismatch between light and SPs prevents direct optical excitation of surface-bound modes, thereby limiting the widespread development of SP-based photonics. Free electrons are a natural choice to directly excite strongly confined SPs because they can supply field components of high momentum at designated positions with subnanometer precision. Here, we theoretically explore free-electron--SP coupling mediated by small scatterers and show that low-energy electrons can efficiently excite surface modes with a maximum probability reached at an optimum surface--scatterer distance. By aligning the electron beam with a periodic array of scatterers placed near a polariton-supporting interface, in-plane Smith--Purcell emission results in the excitation of surface modes along well-defined directions. Our results support using scattering elements to excite SPs with low-energy electrons. △ Less

Submitted 25 June, 2024; originally announced June 2024.

Comments: 17 pages, 8 figures, 71 references

A Novel Diamond-like Carbon based photocathode for PICOSEC Micromegas detectors

Authors: X. Wang, R. Aleksan, Y. Angelis, J. Bortfeldt, F. Brunbauer, M. Brunoldi, E. Chatzianagnostou, J. Datta, K. Degmelt, G. Fanourakis, D. Fiorina, K. J. Floethner, M. Gallinaro, F. Garcia, I. Giomataris, K. Gnanvo, F. J. Iguaz, D. Janssens, A. Kallitsopoulou, M. Kovacic, B. Kross, P. Legou, M. Lisowska, J. Liu, I. Maniatis , et al. (26 additional authors not shown)

Abstract: The PICOSEC Micromegas (MM) detector is a precise timing gaseous detector based on a MM detector operating in a two-stage amplification mode and a Cherenkov radiator. Prototypes equipped with cesium iodide (CsI) photocathodes have shown promising time resolutions as precise as 24 picoseconds (ps) for Minimum Ionizing Particles. However, due to the high hygroscopicity and susceptibility to ion bomb… ▽ More The PICOSEC Micromegas (MM) detector is a precise timing gaseous detector based on a MM detector operating in a two-stage amplification mode and a Cherenkov radiator. Prototypes equipped with cesium iodide (CsI) photocathodes have shown promising time resolutions as precise as 24 picoseconds (ps) for Minimum Ionizing Particles. However, due to the high hygroscopicity and susceptibility to ion bombardment of the CsI photocathodes, alternative photocathode materials are needed to improve the robustness of PICOSEC MM. Diamond-like Carbon (DLC) film have been introduced as a novel robust photocathode material, which have shown promising results. A batch of DLC photocathodes with different thicknesses were produced and evaluated using ultraviolet light. The quantum efficiency measurements indicate that the optimized thickness of the DLC photocathode is approximately 3 nm. Furthermore, DLC photocathodes show good resistance to ion bombardment in aging test compared to the CsI photocathode. Finally, a PICOSEC MM prototype equipped with DLC photocathodes was tested in muon beams. A time resolution of around 42 ps with a detection efficiency of 97% for 150 GeV/c muons were obtained. These results indicate the great potential of DLC as a photocathode for the PICOSEC MM detector. △ Less

Submitted 30 July, 2024; v1 submitted 12 June, 2024; originally announced June 2024.

Transforming a rare event search into a not-so-rare event search in real-time with deep learning-based object detection

Authors: J. Schueler, H. M. Araújo, S. N. Balashov, J. E. Borg, C. Brew, F. M. Brunbauer, C. Cazzaniga, A. Cottle, C. D. Frost, F. Garcia, D. Hunt, A. C. Kaboth, M. Kastriotou, I. Katsioulas, A. Khazov, P. Knights, H. Kraus, V. A. Kudryavtsev, S. Lilley, A. Lindote, M. Lisowska, D. Loomba, M. I. Lopes, E. Lopez Asamar, P. Luna Dapica , et al. (18 additional authors not shown)

Abstract: Deep learning-based object detection algorithms enable the simultaneous classification and localization of any number of objects in image data. Many of these algorithms are capable of operating in real-time on high resolution images, attributing to their widespread usage across many fields. We present an end-to-end object detection pipeline designed for real-time rare event searches for the Migdal… ▽ More Deep learning-based object detection algorithms enable the simultaneous classification and localization of any number of objects in image data. Many of these algorithms are capable of operating in real-time on high resolution images, attributing to their widespread usage across many fields. We present an end-to-end object detection pipeline designed for real-time rare event searches for the Migdal effect, using high-resolution image data from a state-of-the-art scientific CMOS camera in the MIGDAL experiment. The Migdal effect in nuclear scattering, crucial for sub-GeV dark matter searches, has yet to be experimentally confirmed, making its detection a primary goal of the MIGDAL experiment. Our pipeline employs the YOLOv8 object detection algorithm and is trained on real data to enhance the detection efficiency of nuclear and electronic recoils, particularly those exhibiting overlapping tracks that are indicative of the Migdal effect. When deployed online on the MIGDAL readout PC, we demonstrate our pipeline to process and perform the rare event search on 2D image data faster than the peak 120 frame per second acquisition rate of the CMOS camera. Applying these same steps offline, we demonstrate that we can reduce a sample of 20 million camera frames to around 1000 frames while maintaining nearly all signal that YOLOv8 is able to detect, thereby transforming a rare search into a much more manageable search. Our studies highlight the potential of pipelines similar to ours significantly improving the detection capabilities of experiments requiring rapid and precise object identification in high-throughput data environments. △ Less

Submitted 9 April, 2025; v1 submitted 11 June, 2024; originally announced June 2024.

Journal ref: Phys. Rev. D 111, 072004 (2025)

Spatial resolution improvements with finer-pitch GEMs

Authors: K. J. Flöthner, L. Scharenberg, A. Brask, F. Brunbauer, F. Garcia, D. Janssens, B. Ketzer, M. Lisowska, H. Muller, E. Oliveri, G. Orlandini, D. Pfeiffer, L. Ropelewski, J. Samarati, M. Van Stenis, R. Veenhof

Abstract: Gas Electron Multipliers (GEMs) are used in many particle physics experiments, employing their 'standard' configuration with amplification holes of 140 um pitch in a hexagonal pattern. However, the collection of the charge cloud from the primary ionisation electrons from the drift region of the detector into the GEM holes affects the position information from the initial interacting particle. In t… ▽ More Gas Electron Multipliers (GEMs) are used in many particle physics experiments, employing their 'standard' configuration with amplification holes of 140 um pitch in a hexagonal pattern. However, the collection of the charge cloud from the primary ionisation electrons from the drift region of the detector into the GEM holes affects the position information from the initial interacting particle. In this paper, the results from studies with a triple-GEM detector with an X-Y-strip readout anode are presented. It is demonstrated that GEMs with a finer hole pitch of here 90 um improve the detector's spatial resolution. Within these studies, also the impact of the front-end electronics on the spatial resolution was investigated, which is briefly discussed in the paper. △ Less

Submitted 9 June, 2024; originally announced June 2024.

Single channel PICOSEC Micromegas detector with improved time resolution

Authors: A. Utrobicic, R. Aleksan, Y. Angelis, J. Bortfeldt, F. Brunbauer, M. Brunoldi, E. Chatzianagnostou, J. Datta, K. Dehmelt, G. Fanourakis, D. Fiorina, K. J. Floethner, M. Gallinaro, F. Garcia, I. Giomataris, K. Gnanvo, F. J. Iguaz, D. Janssens, A. Kallitsopoulou, M. Kovacic, B. Kross, P. Legou, M. Lisowska, J. Liu, M. Lupberger , et al. (25 additional authors not shown)

Abstract: This paper presents design guidelines and experimental verification of a single-channel PICOSEC Micromegas (MM) detector with an improved time resolution. The design encompasses the detector board, vessel, auxiliary mechanical parts, and electrical connectivity for high voltage (HV) and signals, focusing on improving stability, reducing noise, and ensuring signal integrity to optimize timing perfo… ▽ More This paper presents design guidelines and experimental verification of a single-channel PICOSEC Micromegas (MM) detector with an improved time resolution. The design encompasses the detector board, vessel, auxiliary mechanical parts, and electrical connectivity for high voltage (HV) and signals, focusing on improving stability, reducing noise, and ensuring signal integrity to optimize timing performance. A notable feature is the simple and fast reassembly procedure, facilitating quick replacement of detector internal components that allows for an efficient measurement strategy involving different detector components. The paper also examines the influence of parasitics on the output signal integrity. To validate the design, a prototype assembly and three interchangeable detector boards with varying readout pad diameters were manufactured. The detectors were initially tested in the laboratory environment. Finally, the timing performance of detectors with different pad sizes was verified using a Minimum Ionizing Particle (MIP) beam test. Notably, a record time resolution for a PICOSEC Micromegas detector technology with a CsI photocathode of 12.5$\pm$0.8 ps was achieved with a 10 mm diameter readout pad size detector. △ Less

Submitted 9 June, 2024; originally announced June 2024.

Probing Plexciton Emission from 2D Materials on Gold Nanotrenches

Authors: Junze Zhou, P. A. D. Gonçalves, Fabrizio Riminucci, Scott Dhuey, Edward Barnard, Adam Schwartzberg, F. Javier García de Abajo, Alexander Weber-Bargioni

Abstract: Probing strongly coupled quasiparticle excitations at their intrinsic length scales offers unique insights into their properties and facilitates the design of devices with novel functionalities. In this work, we investigate the formation and emission characteristics of plexcitons, arising from the interaction between surface plasmons in narrow gold nanotrenches and excitons in monolayer WSe2. We s… ▽ More Probing strongly coupled quasiparticle excitations at their intrinsic length scales offers unique insights into their properties and facilitates the design of devices with novel functionalities. In this work, we investigate the formation and emission characteristics of plexcitons, arising from the interaction between surface plasmons in narrow gold nanotrenches and excitons in monolayer WSe2. We study this strong plasmon-exciton coupling in both the far-field and the near-field. Specifically, we observe a Rabi splitting in the far-field reflection spectra of about 80 meV under ambient conditions, consistent with our theoretical modeling. Using a custom-designed near-field probe, we find that plexciton emission originates predominantly from the lower-frequency branch, which we can directly probe and map the local field distribution. We precisely determine the plexciton extension, similar to the trench width, with nanometric precision via collecting spectra at controlled probe locations. Our work opens exciting prospects for nanoscale mapping and engineering of plexcitons in complex nanostructures with potential applications in nanophotonic devices, optoelectronics, and quantum electrodynamics in nanoscale cavities. △ Less

Submitted 7 April, 2024; originally announced April 2024.

Comments: 9 pages, 4 figures, Supplementary information will be available upon request

Journal ref: Nature Communications 15, 9583 (2024)

Toward Optimum Coupling between Free Electrons and Confined Optical Modes

Authors: Valerio Di Giulio, Evelijn Akerboom, Albert Polman, F. Javier García de Abajo

Abstract: Free electrons are unique tools to probe and manipulate nanoscale optical fields with emerging applications in ultrafast spectromicroscopy and quantum metrology. However, advances in this field are hindered by the small probability associated with the excitation of single optical modes by individual free electrons. Here, we theoretically investigate the scaling properties of the electron-driven ex… ▽ More Free electrons are unique tools to probe and manipulate nanoscale optical fields with emerging applications in ultrafast spectromicroscopy and quantum metrology. However, advances in this field are hindered by the small probability associated with the excitation of single optical modes by individual free electrons. Here, we theoretically investigate the scaling properties of the electron-driven excitation probability for a wide variety of optical modes including plasmons in metallic nanostructures and Mie resonances in dielectric cavities, spanning a broad spectral range that extends from the ultraviolet to the infrared. The highest probabilities for the direct generation of three-dimensionally confined modes are observed at low electron and mode energies in small structures, with order-unity ($\sim100$\%) coupling demanding the use of $<100$~eV electrons interacting with $<1$~eV polaritons confined down to tens of nm. Electronic transitions in artificial atoms also emerge as practical systems to realize strong coupling to few-eV free electrons. In contrast, conventional dielectric cavities reach a maximum probability in the few-percent range. In addition, we show that waveguide modes can be generated with higher-than-unity efficiency by phase-matched interaction with grazing electrons, suggesting an efficient method to create multiple excitations of a localized optical mode by an individual electron through funneling the so-generated propagating photons into a confining cavity -- an alternative approach to direct electron-cavity interaction. Our work provides a roadmap to optimize electron-photon coupling with potential applications in electron spectromicroscopy as well as nonlinear and quantum optics at the nanoscale. △ Less

Submitted 3 April, 2024; v1 submitted 23 March, 2024; originally announced March 2024.

Comments: 30 pages, 11 figures, 97 references

Guiding light with surface exciton-polaritons in atomically thin superlattices

Authors: Sara A. Elrafei, T. V. Raziman, Sandra de Vega, F. Javier García de Abajo, Alberto G. Curto

Abstract: Two-dimensional materials give access to the ultimate physical limits of Photonics with appealing properties for ultracompact optical components such as waveguides and modulators. Specifically, in monolayer semiconductors, a strong excitonic resonance leads to a sharp oscillation in permittivity; at energies close to an exciton, the real part of the permittivity can reach high positive values or e… ▽ More Two-dimensional materials give access to the ultimate physical limits of Photonics with appealing properties for ultracompact optical components such as waveguides and modulators. Specifically, in monolayer semiconductors, a strong excitonic resonance leads to a sharp oscillation in permittivity; at energies close to an exciton, the real part of the permittivity can reach high positive values or even become negative. This extreme optical response enables surface exciton-polaritons to guide visible light bound to an atomically thin layer. However, such ultrathin waveguides support a transverse electric (TE) mode with low confinement and a transverse magnetic (TM) mode with short propagation. Here, we propose that realistic semiconductor-insulator-semiconductor superlattices consisting of monolayer WS$_2$ and hexagonal boron nitride (hBN) can improve the properties of both TE and TM modes. Compared to a single monolayer, a heterostructure with a 1-nm hBN spacer improves the confinement of the TE mode from 1.2 to around 0.5 $μ$m, whereas the out-of-plane extension of the TM mode increases from 25 to 50 nm. We propose two simple additivity rules for mode confinement valid in the ultrathin film approximation for heterostructures with increasing spacer thickness. Stacking additional WS2 monolayers into superlattices further enhances the waveguiding properties. Our results underscore the potential of monolayer superlattices as a platform for visible nanophotonics with promising optical, electrical, and magnetic tunability △ Less

Submitted 15 February, 2024; originally announced February 2024.

Comments: 19 pages, 7 figures, plus supplementary information

Journal ref: Nanophotonics (2024)

Characterisation of resistive MPGDs with 2D readout

Authors: L. Scharenberg, F. Brunbauer, H. Danielson, Z. Fang, K. J. Flöthner, F. Garcia, D. Janssens, M. Lisowska, J. Liu, Y. Lyu, B. Mehl, H. Muller, R. de Oliveira, E. Oliveri, G. Orlandini, D. Pfeiffer, O. Pizzirusso, L. Ropelewski, J. Samarati, M. Shao, A. Teixeira, M. Van Stenis, R. Veenhof, Z. Zhang, Y. Zhou

Abstract: Micro-Pattern Gaseous Detectors (MPGDs) with resistive anode planes provide intrinsic discharge robustness while maintaining good spatial and time resolutions. Typically read out with 1D strips or pad structures, here the characterisation results of resistive anode plane MPGDs with 2D strip readout are presented. A uRWELL prototype is investigated in view of its use as a reference tracking detecto… ▽ More Micro-Pattern Gaseous Detectors (MPGDs) with resistive anode planes provide intrinsic discharge robustness while maintaining good spatial and time resolutions. Typically read out with 1D strips or pad structures, here the characterisation results of resistive anode plane MPGDs with 2D strip readout are presented. A uRWELL prototype is investigated in view of its use as a reference tracking detector in a future gaseous beam telescope. A MicroMegas prototype with a fine-pitch mesh (730 line-pairs-per-inch) is investigated, both for comparison and to profit from the better field uniformity and thus the ability to operate the detector more stable at high gains. Furthermore, the measurements are another application of the RD51 VMM3a/SRS electronics. △ Less

Submitted 6 February, 2024; originally announced February 2024.

Generation of entangled waveguided photon pairs by free electrons

Authors: Theis P. Rasmussen, Álvaro Rodríguez Echarri, Joel D. Cox, F. Javier García de Abajo

Abstract: Entangled photon pairs are a key resource in future quantum-optical communication and information technologies. While high-power laser light propagating in bulk nonlinear optical crystals is conventionally used to generate entangled photons that are routed into optical configurations, such schemes suffer from low efficiency due to the weak intrinsic nonlinear optical response of known materials an… ▽ More Entangled photon pairs are a key resource in future quantum-optical communication and information technologies. While high-power laser light propagating in bulk nonlinear optical crystals is conventionally used to generate entangled photons that are routed into optical configurations, such schemes suffer from low efficiency due to the weak intrinsic nonlinear optical response of known materials and losses associated with photon in- and out-coupling. Here, we propose a scheme to generate entangled polariton pairs directly within optical waveguides using free electrons, whereby the measured energy loss of undeflected electrons heralds the production of counter-propagating polaritons pairs that are entangled in energy and direction of emission. As a paradigmatic example, we study the excitation of plasmon polaritons in metal strip waveguides that, within specific frequency regimes, strongly enhance light-matter interactions that lead to two-plasmon generation in comparison to the probability of single-plasmon excitation. We demonstrate that, under appropriate conditions, an electron energy loss detected in an optimal frequency range can reliably signal the generation of a plasmon pair entangled in energy and momentum. Our proposed scheme can be directly applied to other types of optical waveguides for in situ generation of entangled photon pairs in quantum-optics applications. △ Less

Submitted 19 December, 2023; originally announced December 2023.

Journal ref: Sci. Adv. 10, eadn6312 (2024)

Quantum-mechanical effects in photoluminescence from thin crystalline gold films

Authors: Alan R. Bowman, Álvaro Rodríguez Echarri, Fatemeh Kiani, Fadil Iyikanat, Ted V. Tsoulos, Joel D. Cox, Ravishankar Sundararaman, F. Javier García de Abajo, Giulia Tagliabue

Abstract: Luminescence constitutes a unique source of insight into hot carrier processes in metals, including those in plasmonic nanostructures used for sensing and energy applications. However, being weak in nature, metal luminescence remains poorly understood, its microscopic origin strongly debated, and its potential for unravelling nanoscale carrier dynamics largely unexploited. Here, we reveal quantum-… ▽ More Luminescence constitutes a unique source of insight into hot carrier processes in metals, including those in plasmonic nanostructures used for sensing and energy applications. However, being weak in nature, metal luminescence remains poorly understood, its microscopic origin strongly debated, and its potential for unravelling nanoscale carrier dynamics largely unexploited. Here, we reveal quantum-mechanical effects emanating in the luminescence from thin monocrystalline gold flakes. Specifically, we present experimental evidence, supported by first-principles simulations, to demonstrate its photoluminescence origin when exciting in the interband regime. Our model allows us to identify changes to the measured gold luminescence due to quantum-mechanical effects as the gold film thickness is reduced. Excitingly, such effects are observable in the luminescence signal from flakes up to 40 nm in thickness, associated with the out-of-plane discreteness of the electronic band structure near the Fermi level. We qualitatively reproduce the observations with first-principles modelling, thus establishing a unified description of luminescence in gold and enabling its widespread application as a probe of carrier dynamics and light-matter interactions in this material. Our study paves the way for future explorations of hot-carriers and charge-transfer dynamics in a multitude of material systems. △ Less

Submitted 25 September, 2023; v1 submitted 17 July, 2023; originally announced July 2023.

Comments: Main text 21 pages and 4 figures. Supplemental Information 33 pages and 17 figures

Journal ref: Light. Sci. Appl. 13, 91 (2024)

High dimensional tori and chaotic and intermittent transients in magnetohydrodynamic Couette flows

Authors: Ferran Garcia, Jude Ogbonna, André Giesecke, Frank Stefani

Abstract: The magnetised spherical Couette (MSC) problem, a three dimensional magnetohydrodynamic paradigmatic model in geo- and astrophysics, is considered to investigate bifurcations to high-dimensional invariant tori and chaotic flows in large scale dissipative dynamical systems with symmetry. The main goal of the present study is to elucidate the origin of chaotic transients and intermittent behaviour f… ▽ More The magnetised spherical Couette (MSC) problem, a three dimensional magnetohydrodynamic paradigmatic model in geo- and astrophysics, is considered to investigate bifurcations to high-dimensional invariant tori and chaotic flows in large scale dissipative dynamical systems with symmetry. The main goal of the present study is to elucidate the origin of chaotic transients and intermittent behaviour from two different sequences of Hopf bifurcations involving invariant tori with four fundamental frequencies, which may be resonant. Numerical evidence of the existence of a crisis event destroying chaotic attractors and giving rise to the chaotic transients is provided. It is also shown that unstable invariant tori take part in the time evolution of these chaotic transients. For one sequence of bifurcations, the study demonstrates that chaotic transients display on-off intermittent behaviour. A possible explanatory mechanism is discussed. △ Less

Submitted 19 January, 2023; originally announced June 2023.

Comments: 19 pages and 18 figures

MSC Class: 76U99; 76E25; 37G15; 37G40

Multi-plasmon effects and plasmon satellites in photoemission from nanostructures

Authors: P. A. D. Gonçalves, F. Javier García de Abajo

Abstract: Plasmons can be excited during photoemission and produce spectral photoelectron features that yield information on the nanoscale optical response of the probed materials. However, these so-called plasmon satellites have so far been observed only for planar surfaces, while their potential for the characterization of nanostructures remains unexplored. Here, we theoretically demonstrate that core-lev… ▽ More Plasmons can be excited during photoemission and produce spectral photoelectron features that yield information on the nanoscale optical response of the probed materials. However, these so-called plasmon satellites have so far been observed only for planar surfaces, while their potential for the characterization of nanostructures remains unexplored. Here, we theoretically demonstrate that core-level photoemission from nanostructures can display spectrally narrow plasmonic features, reaching relatively high probabilities similar to the direct peak. Using a nonperturbative quantum-mechanical framework, we find a dramatic effect of nanostructure morphology and dimensionality as well as universal scaling laws for the plasmon-satellite probabilities. In addition, we introduce a pump--probe scheme in which plasmons are optically excited prior to photoemission, leading to plasmon losses and gains in the photoemission spectra and granting us access to the ultrafast dynamics of the sampled nanostructure. These results emphasize the potential of plasmon satellites to explore multi-plasmon effects and ultrafast electron--plasmon dynamics in metal-based nanoparticles and two-dimensional nanoislands. △ Less

Submitted 17 July, 2023; v1 submitted 22 May, 2023; originally announced May 2023.

Comments: 8 pages, 4 figures

Journal ref: Nanoscale 15, 11731-12126 (2023)

Understanding radioactive ion beam production at ISAC through yield measurements and simulations

Authors: Peter Kunz, Jens Lassen, Corina Andreoiu, Fatima H. Garcia, Hua Yang, Valery Radchenko

Abstract: The high-intensity proton beam of the TRIUMF 500 MeV cyclotron offers unique opportunities to produce rare isotopes by irradiating a variety of targets. In particular, the ISAC (Isotope Separation and ACceleration) facility provides the infrastructure to deliver customized rare ion beams for fundamental research in nuclear physics, astrophysics, material science, and nuclear medicine. A continuous… ▽ More The high-intensity proton beam of the TRIUMF 500 MeV cyclotron offers unique opportunities to produce rare isotopes by irradiating a variety of targets. In particular, the ISAC (Isotope Separation and ACceleration) facility provides the infrastructure to deliver customized rare ion beams for fundamental research in nuclear physics, astrophysics, material science, and nuclear medicine. A continuous effort is made to develop new radioactive ion beams (RIB) and improve their intensity or purity, properties that depend strongly on the type of target, operating conditions, the ion source, and beam transport efficiency. Yield data and theoretical production rates based on FLUKA and Geant4 simulations are collected in the TRIUMF Isotope Database, providing a valuable resource for RIB development and experiment planning. This paper introduces the newly upgraded TRIUMF Isotope Database and presents examples on how it's resources can be used to plan experiments and understand the origin of certain RIB. In particular we discuss the collection of 155Tb which is an important component of medical isotope research at TRIUMF. △ Less

Submitted 17 May, 2023; originally announced May 2023.

Attosecond electron microscopy by free-electron homodyne detection

Authors: John H. Gaida, Hugo Lourenço-Martins, Murat Sivis, Thomas Rittmann, Armin Feist, F. Javier García de Abajo, Claus Ropers

Abstract: Time-resolved electron microscopy aims at tracking nanoscale excitations and dynamic states of matter with a temporal resolution ultimately reaching the attosecond regime. Periodically time-varying fields in an illuminated specimen cause free-electron inelastic scattering, which enables the spectroscopic imaging of near-field intensities. However, access to the evolution of nanoscale fields and st… ▽ More Time-resolved electron microscopy aims at tracking nanoscale excitations and dynamic states of matter with a temporal resolution ultimately reaching the attosecond regime. Periodically time-varying fields in an illuminated specimen cause free-electron inelastic scattering, which enables the spectroscopic imaging of near-field intensities. However, access to the evolution of nanoscale fields and structures within the light cycle requires a sensitivity to the optical phase. Here, we introduce Free-Electron Homodyne Detection (FREHD) as a universally applicable approach to electron microscopy of phase-resolved optical responses at high spatiotemporal resolution. In this scheme, a phase-controlled reference interaction serves as the local oscillator to extract arbitrary sample-induced modulations of a free-electron wave function. We demonstrate this principle through the phase-resolved imaging of plasmonic fields with few-nanometer spatial and sub-cycle temporal resolutions. Due to its sensitivity to both phase- and amplitude-modulated electron beams, FREHD measurements will be able to detect and amplify weak signals stemming from a wide variety of microscopic origins, including linear and nonlinear optical polarizations, atomic and molecular resonances and attosecond-modulated structure factors. △ Less

Submitted 4 May, 2023; originally announced May 2023.

Journal ref: Nature Photononics 18, 509-515 (2024)

A large area 100 channel Picosec Micromegas detector with sub 20 ps time resolution

Authors: Antonija Utrobicic, Yannis Angelis, Stephan Aune, Jonathan Bortfeldt, Florian Brunbauer, Evridiki Chatzianagnostou, Klaus Dehmelt, Daniel Desforge, George Fanourakis, Karl Jonathan Floethner, Michele Gallinaro, Francisco Garcia, Prakhar Garg, Ioannis Giomataris, Kondo Gnanvo, Thomas Gustavsson, Francisco Jose Iguaz, Djunes Janssens, Alexandra Kallitsopoulou, Marinko Kovacic, Philippe Legou, Marta Lisowska, Jianbei Liu, Michael Lupberger, Simona Malace , et al. (20 additional authors not shown)

Abstract: The PICOSEC Micromegas precise timing detector is based on a Cherenkov radiator coupled to a semi-transparent photocathode and a Micromegas amplification structure. The first proof of concept single-channel small area prototype was able to achieve time resolution below 25 ps. One of the crucial aspects in the development of the precise timing gaseous detectors applicable in high-energy physics exp… ▽ More The PICOSEC Micromegas precise timing detector is based on a Cherenkov radiator coupled to a semi-transparent photocathode and a Micromegas amplification structure. The first proof of concept single-channel small area prototype was able to achieve time resolution below 25 ps. One of the crucial aspects in the development of the precise timing gaseous detectors applicable in high-energy physics experiments is a modular design that enables large area coverage. The first 19-channel multi-pad prototype with an active area of approximately 10 cm$^2$ suffered from degraded timing resolution due to the non-uniformity of the preamplification gap. A new 100 cm$^2$ detector module with 100 channels based on a rigid hybrid ceramic/FR4 Micromegas board for improved drift gap uniformity was developed. Initial measurements with 80 GeV/c muons showed improvements in timing response over measured pads and a time resolution below 25 ps. More recent measurements with a new thinner drift gap detector module and newly developed RF pulse amplifiers show that the resolution can be enhanced to a level of 17~ps. This work will present the development of the detector from structural simulations, design, and beam test commissioning with a focus on the timing performance of a thinner drift gap detector module in combination with new electronics using an automated timing scan method. △ Less

Submitted 31 March, 2023; originally announced April 2023.

Towards robust PICOSEC Micromegas precise timing detectors

Authors: Marta Lisowska, Yannis Angelis, Stephan Aune, Jonathan Bortfeldt, Florian Brunbauer, Evridiki Chatzianagnostou, Klaus Dehmelt, Daniel Desforge, George Fanourakis, Karl Jonathan Floethner, Michele Gallinaro, Francisco Garcia, Prakhar Garg, Ioannis Giomataris, Kondo Gnanvo, Thomas Gustavsson, Francisco Jose Iguaz, Djunes Janssens, Alexandra Kallitsopoulou, Marinko Kovacic, Philippe Legou, Jianbei Liu, Michael Lupberger, Simona Malace, Ioannis Maniatis , et al. (21 additional authors not shown)

Abstract: The PICOSEC Micromegas (MM) detector is a precise timing gaseous detector consisting of a Cherenkov radiator combined with a photocathode and a MM amplifying structure. A 100-channel non-resistive PICOSEC MM prototype with 10x10 cm^2 active area equipped with a Cesium Iodide (CsI) photocathode demonstrated a time resolution below 18 ps. The objective of this work is to improve the PICOSEC MM detec… ▽ More The PICOSEC Micromegas (MM) detector is a precise timing gaseous detector consisting of a Cherenkov radiator combined with a photocathode and a MM amplifying structure. A 100-channel non-resistive PICOSEC MM prototype with 10x10 cm^2 active area equipped with a Cesium Iodide (CsI) photocathode demonstrated a time resolution below 18 ps. The objective of this work is to improve the PICOSEC MM detector robustness aspects; i.e. integration of resistive MM and carbon-based photocathodes; while maintaining good time resolution. The PICOSEC MM prototypes have been tested in laboratory conditions and successfully characterised with 150 GeV/c muon beams at the CERN SPS H4 beam line. The excellent timing performance below 20 ps for an individual pad obtained with the 10x10 cm^2 area resistive PICOSEC MM of 20 MOhm/sq showed no significant time resolution degradation as a result of adding a resistive layer. A single-pad prototype equipped with a 12 nm thick Boron Carbide (B4C) photocathode presented a time resolution below 35 ps; opening up new possibilities for detectors with robust photocathodes. The results made the concept more suitable for the experiments in need of robust detectors with good time resolution. △ Less

Submitted 31 March, 2023; originally announced March 2023.

The novel XYU-GEM to resolve ambiguities

Authors: K. J. Flöthner, F. Brunbauer, S. Ferry, F. Garcia, D. Janssens, B. Ketzer, M. Lisowska, H. Muller, R. de Oliveira, E. Oliveri, G. Orlandini, D. Pfeiffer, L. Ropelewski, J. Samarati, F. Sauli, L. Scharenberg, M. van Stenis, A. Utrobicic, R. Veenhof

Abstract: Removing ambiguities within a single stage becomes crucial when one can not use multiple detectors behind each other to resolve them which naturally is the case for neutral radiation. An example would be RICH detectors. Commonly pixilated readout is choosen for this purpose. However, this causes a remarkable increase in quantity of channels and does not scale up well. Therefore, the XYU-GEM was pr… ▽ More Removing ambiguities within a single stage becomes crucial when one can not use multiple detectors behind each other to resolve them which naturally is the case for neutral radiation. An example would be RICH detectors. Commonly pixilated readout is choosen for this purpose. However, this causes a remarkable increase in quantity of channels and does not scale up well. Therefore, the XYU-GEM was proposed as a three coordinate strip-readout which is combined with a triple GEM detector. The readout complements a common XY readout with an additional projection which is tilted by 45°. The overdetermination due to three projections can be used to resovle ambiguities. Following the detector design will be explained, first measurements discussed to understand the response of the detector and a way to change the charge sharing without changing the manufacturing parameters of the readout. △ Less

Submitted 31 March, 2023; originally announced March 2023.

Ultraconfined plasmons in atomically thin crystalline silver nanostructures

Authors: Vahagn Mkhitaryan, Andrew P. Weber, Saad Abdullah, Laura Fernández, Zakaria M. Abd El-Fattah, Ignacio Piquero-Zulaica, Hitesh Agarwal, Kevin García Díez, 3 Frederik Schiller, J. Enrique Ortega, F. Javier García de Abajo

Abstract: The ability to confine light down to atomic scales is critical for the development of applications in optoelectronics and optical sensing as well as for the exploration of nanoscale quantum phenomena. Plasmons in metallic nanostructures can achieve this type of confinement, although fabrication imperfections down to the subnanometer scale hinder actual developments. Here, we demonstrate narrow pla… ▽ More The ability to confine light down to atomic scales is critical for the development of applications in optoelectronics and optical sensing as well as for the exploration of nanoscale quantum phenomena. Plasmons in metallic nanostructures can achieve this type of confinement, although fabrication imperfections down to the subnanometer scale hinder actual developments. Here, we demonstrate narrow plasmons in atomically thin crystalline silver nanostructures fabricated by prepatterning silicon substrates and epitaxially depositing silver films of just a few atomic layers in thickness. Combined with on-demand lateral shaping, this procedure allows for an unprecedented control over optical field confinement in the near-infrared spectral region. Specifically, we observe fundamental and higher-order plasmons featuring extreme spatial confinement and high-quality factors that reflect the crystallinity of the metal. Our approach holds potential for the design and exploitation of atomic-scale nanoplasmonic devices in optoelectronics, sensing, and quantum-physics applications. △ Less

Submitted 20 March, 2023; originally announced March 2023.

Comments: 11 pages, 9 figures, 50 references

The human factor: results of a small-angle scattering data analysis Round Robin

Authors: Brian R. Pauw, Glen J. Smales, Andy S. Anker, Daniel M. Balazs, Frederick L. Beyer, Ralf Bienert, Wim G. Bouwman, Ingo Breßler, Joachim Breternitz, Erik S Brok, Gary Bryant, Andrew J. Clulow, Erin R. Crater, Frédéric De Geuser, Alessandra Del Giudice, Jérôme Deumer, Sabrina Disch, Shankar Dutt, Kilian Frank, Emiliano Fratini, Elliot P. Gilbert, Marc Benjamin Hahn, James Hallett, Max Hohenschutz, Martin Hollamby , et al. (24 additional authors not shown)

Abstract: A Round Robin study has been carried out to estimate the impact of the human element in small-angle scattering data analysis. Four corrected datasets were provided to participants ready for analysis. All datasets were measured on samples containing spherical scatterers, with two datasets in dilute dispersions, and two from powders. Most of the 46 participants correctly identified the number of pop… ▽ More A Round Robin study has been carried out to estimate the impact of the human element in small-angle scattering data analysis. Four corrected datasets were provided to participants ready for analysis. All datasets were measured on samples containing spherical scatterers, with two datasets in dilute dispersions, and two from powders. Most of the 46 participants correctly identified the number of populations in the dilute dispersions, with half of the population mean entries within 1.5% and half of the population width entries within 40%, respectively. Due to the added complexity of the structure factor, much fewer people submitted answers on the powder datasets. For those that did, half of the entries for the means and widths were within 44% and 86% respectively. This Round Robin experiment highlights several causes for the discrepancies, for which solutions are proposed. △ Less

Submitted 7 March, 2023; originally announced March 2023.

Comments: 23 pages, 10 figures. For the original information sent to RR participants, see https://zenodo.org/record/7506365 . For the anonymized results and Jupyter notebook for analysis, see https://zenodo.org/record/7509710

Performance of the new RD51 VMM3a/SRS beam telescope---studying MPGDs simultaneously in energy, space and time at high rates

Authors: L. Scharenberg, J. Bortfeldt, F. Brunbauer, K. Desch, K. Flöthner, F. Garcia, D. Janssens, M. Lisowska, H. Muller, E. Oliveri, G. Orlandini, D. Pfeiffer, L. Ropelewski, J. Samarati, D. Sorvisto, M. van Stenis, R. Veenhof

Abstract: The RD51 collaboration maintains a common infrastructure at CERN for its R & D activities, including two beam telescopes for test beam campaigns. Recently, one of the beam telescopes has been equipped and commissioned with new multi-channel and charge-sensitive front-end electronics based on the ATLAS/BNL VMM3a front-end ASIC and the RD51 Scalable Readout System (SRS). This allows to read out the… ▽ More The RD51 collaboration maintains a common infrastructure at CERN for its R & D activities, including two beam telescopes for test beam campaigns. Recently, one of the beam telescopes has been equipped and commissioned with new multi-channel and charge-sensitive front-end electronics based on the ATLAS/BNL VMM3a front-end ASIC and the RD51 Scalable Readout System (SRS). This allows to read out the detectors at high rates (up to the MHz regime) with electronics time resolutions of the order of 1 ns and the ability to handle different detector types and sizes, due to a larger dynamic range compared to the previous front-end electronics based on the APV25 ASIC. Having studied and improved the beam telescope's performance over the course of three test beam campaigns, the results are presented in this paper. △ Less

Submitted 16 February, 2023; originally announced February 2023.

Spatiotemporal Electron-Beam Focusing through Parallel Interactions with Shaped Optical Fields

Authors: F. Javier García de Abajo, Claus Ropers

Abstract: The ability to modulate free electrons with light has emerged as a powerful tool to produce attosecond electron wavepackets. However, research has so far aimed at the manipulation of the longitudinal wave function component, while the transverse degrees of freedom have primarily been utilized for spatial rather than temporal shaping. Here, we show that the coherent superposition of parallel light-… ▽ More The ability to modulate free electrons with light has emerged as a powerful tool to produce attosecond electron wavepackets. However, research has so far aimed at the manipulation of the longitudinal wave function component, while the transverse degrees of freedom have primarily been utilized for spatial rather than temporal shaping. Here, we show that the coherent superposition of parallel light-electron interactions in separate spatial zones allows for a simultaneous spatial and temporal compression of a convergent electron wave function, enabling the formation of sub-Ångström focal spots of attosecond duration. The proposed approach will facilitate the exploration of previously inaccessible ultrafast atomic-scale phenomena in particular enabling attosecond scanning transmission electron microscopy. △ Less

Submitted 12 February, 2023; originally announced February 2023.

Comments: 12 pages, 6 figures, 42 references

Journal ref: Physical Review Letters 130, 246901 (2023)

Mathematical approaches for characterization, control, calibration and validation of a quantum computing device

Authors: Zhichao Peng, Daniel Appelo, N. Anders Petersson, Fortino Garcia, Yujin Cho

Abstract: Quantum computing has received significant amounts of interest from many different research communities over the last few years. Although there are many introductory texts that focus on the algorithmic parts of quantum computing, there is a dearth of publications that describe the modeling, calibration and operation of current quantum computing devices. One aim of this report is to fill that void… ▽ More Quantum computing has received significant amounts of interest from many different research communities over the last few years. Although there are many introductory texts that focus on the algorithmic parts of quantum computing, there is a dearth of publications that describe the modeling, calibration and operation of current quantum computing devices. One aim of this report is to fill that void by providing a case study that walks through the entire procedure from the characterization and optimal control of a qudit device at Lawrence Livermore National Laboratory (LLNL) to the validation of the results. A goal of the report is to provide an introduction for students and researchers, especially computational mathematicians, who are interested in but new to quantum computing. Both experimental and mathematical aspects of this procedure are discussed. We present a description of the LLNL QuDIT testbed, the mathematical models that are used to describe it, and the numerical methods that are used to to design optimal controls. We also present experimental and computational methods that can be used to characterize a quantum device. Finally, an experimental validation of an optimized control pulse is presented, which relies on the accuracy of the characterization and the optimal control methodologies. △ Less

Submitted 25 January, 2023; originally announced January 2023.

Report number: LLNL-TR-843608

Interrogating Quantum Nonlocal Effects in Nanoplasmonics through Electron-Beam Spectroscopy

Authors: P. A. D. Gonçalves, F. Javier García de Abajo

Abstract: A rigorous account of quantum nonlocal effects is paramount for understanding the optical response of metal nanostructures and for designing plasmonic devices at the nanoscale. Here, we present a scheme for retrieving the quantum surface response of metals, encapsulated in the Feibelman $d$-parameters, from electron energy-loss spectroscopy (EELS) and cathodoluminescence (CL) measurements. We theo… ▽ More A rigorous account of quantum nonlocal effects is paramount for understanding the optical response of metal nanostructures and for designing plasmonic devices at the nanoscale. Here, we present a scheme for retrieving the quantum surface response of metals, encapsulated in the Feibelman $d$-parameters, from electron energy-loss spectroscopy (EELS) and cathodoluminescence (CL) measurements. We theoretically demonstrate that quantum nonlocal effects have a dramatic impact on EELS and CL spectra, in the guise of spectral shifts and nonlocal damping, when either the system size or the inverse wave vector in extended structures approach the nanometer scale. Our concept capitalizes on the unparalleled ability of free-electrons to supply deeply subwavelength near-fields and, thus, probe the optical response of metals at length scales in which quantum-mechanical effects are apparent. These results pave the way for a widespread use of the $d$-parameter formalism, thereby facilitating a rigorous yet practical inclusion of nonclassical effects in nanoplasmonics. △ Less

Submitted 13 May, 2023; v1 submitted 24 January, 2023; originally announced January 2023.

Comments: 8 pages, 4 figures

Journal ref: Nano Letters 23, 4242-4249 (2023)

Nanophotonics for pair production

Authors: Valerio Di Giulio, F. Javier García de Abajo

Abstract: The transformation of electromagnetic energy into matter represents a fascinating prediction of relativistic quantum electrodynamics that is paradigmatically exemplified by the creation of electron-positron pairs out of light. However, this phenomenon has a very low probability, so positron sources rely instead on beta decay, which demands elaborate monochromatization and trapping schemes to achie… ▽ More The transformation of electromagnetic energy into matter represents a fascinating prediction of relativistic quantum electrodynamics that is paradigmatically exemplified by the creation of electron-positron pairs out of light. However, this phenomenon has a very low probability, so positron sources rely instead on beta decay, which demands elaborate monochromatization and trapping schemes to achieve high-quality beams. Here, we propose to use intense, strongly confined optical near fields supported by a nanostructured material in combination with high-energy photons to create electron-positron pairs. Specifically, we show that the interaction between near-threshold gamma-rays and polaritons yields higher pair-production cross sections, largely exceeding those associated with free-space photons. Our work opens an unexplored avenue toward generating tunable pulsed positrons at the intersection between particle physics and nanophotonics. △ Less

Submitted 21 August, 2023; v1 submitted 18 January, 2023; originally announced January 2023.

Comments: 15 pages, 6 figures, 55 references

$μ$eV electron spectromicroscopy using free-space light

Authors: Yves Auad, Eduardo J. C. Dias, Marcel Tencé, Jean-Denis Blazit, Xiaoyan Li, Luiz Fernando Zagonel, Odile Stéphan, Luiz H. G. Tizei, F. Javier García de Abajo, Mathieu Kociak

Abstract: The synergy between free electrons and light has recently been leveraged to reach an impressive degree of simultaneous spatial and spectral resolution, enabling applications in microscopy and quantum optics. However, the required combination of electron optics and light injection into the spectrally narrow modes of arbitrary specimens remains a challenge. Here, we demonstrate microelectronvolt spe… ▽ More The synergy between free electrons and light has recently been leveraged to reach an impressive degree of simultaneous spatial and spectral resolution, enabling applications in microscopy and quantum optics. However, the required combination of electron optics and light injection into the spectrally narrow modes of arbitrary specimens remains a challenge. Here, we demonstrate microelectronvolt spectral resolution in the nanoscale mapping of photonic modes with quality factors as high as 10$^4$. We rely on mode-matching of a tightly focused laser beam to whispering gallery modes to achieve a 10$^8$-fold increase in light-electron coupling efficiency. By adapting the shape and size of free-space optical beams to address specific physical questions, our approach allows us to interrogate any type of photonic structure with unprecedented spectral and spatial detail △ Less

Submitted 23 December, 2022; originally announced December 2022.

Journal ref: Nature Communications volume 14, Article number: 4442 (2023)

Transuranium isotopes at ISAC/TRIUMF

Authors: Peter Kunz, Corina Andreoiu, Fatima H. Garcia, Jens Lassen

Abstract: The production of transuranium isotopes has been demonstrated at the Isotope Separation and ACceleration (ISAC) facility. In particular a laser-ionized $^{239}$Pu beam, extracted from a uranium carbide target, was investigated. The experimental work was complemented by GEANT4 simulations, modelling the impact of secondary particles on the creation of transuranium isotopes through inelastic nuclear… ▽ More The production of transuranium isotopes has been demonstrated at the Isotope Separation and ACceleration (ISAC) facility. In particular a laser-ionized $^{239}$Pu beam, extracted from a uranium carbide target, was investigated. The experimental work was complemented by GEANT4 simulations, modelling the impact of secondary particles on the creation of transuranium isotopes through inelastic nuclear reactions. Theoretical production cross sections were derived and compared to experimental results, leading to a discussion on boundary conditions for the release of neptunium and plutonium from ISAC uranium carbide targets. △ Less

Submitted 25 November, 2022; originally announced November 2022.