Showing 1–50 of 238 results for author: Garcia, A

Demonstration of full-scale spatio-temporal diagnostics of solid-density plasmas driven by an ultra-short relativistic laser pulse using an X-ray free-electron laser

Authors: Lingen Huang, Michal Šmíd, Long Yang, Oliver Humphries, Johannes Hagemann, Thea Engler, Xiayun Pan, Yangzhe Cui, Thomas Kluge, Ritz Aguilar, Carsten Baehtz, Erik Brambrink, Engin Eren, Katerina Falk, Alejandro Laso Garcia, Sebastian Göde, Christian Gutt, Mohamed Hassan, Philipp Heuser, Hauke Höppner, Michaela Kozlova, Wei Lu, Josefine Metzkes-Ng, Masruri Masruri, Mikhail Mishchenko , et al. (20 additional authors not shown)

Abstract: Understanding the complex plasma dynamics in ultra-intense relativistic laser-solid interactions is of fundamental importance to the applications of laser plasma-based particle accelerators, creation of high energy-density matter, understanding of planetary science and laser-driven fusion energy. However, experimental efforts in this regime have been limited by the accessibility of over-critical d… ▽ More Understanding the complex plasma dynamics in ultra-intense relativistic laser-solid interactions is of fundamental importance to the applications of laser plasma-based particle accelerators, creation of high energy-density matter, understanding of planetary science and laser-driven fusion energy. However, experimental efforts in this regime have been limited by the accessibility of over-critical density and spatio-temporal resolution of conventional diagnostics. Over the last decade, the advent of femtosecond brilliant hard X-ray free electron lasers (XFELs) is opening new horizons to break these limitations. Here, for the first time we present full-scale spatio-temporal measurements of solid-density plasma dynamics, including preplasma generation with tens of nanometer-scale length driven by the leading edge of a relativistic laser pulse, ultrafast heating and ionization at the main pulse arrival, laser-driven blast shock waves and transient surface return current-induced compression dynamics up to hundreds of picoseconds after interaction. These observations are enabled by utilizing a novel combination of advanced X-ray diagnostics such as small-angle X-ray scattering (SAXS), resonant X-ray emission spectroscopy (RXES), and propagation-based X-ray phase-contrast imaging (XPCI) simultaneously at the European XFEL-HED beamline station. △ Less

Submitted 9 May, 2025; originally announced May 2025.

Roadmap on Advancements of the FHI-aims Software Package

Authors: Joseph W. Abbott, Carlos Mera Acosta, Alaa Akkoush, Alberto Ambrosetti, Viktor Atalla, Alexej Bagrets, Jörg Behler, Daniel Berger, Björn Bieniek, Jonas Björk, Volker Blum, Saeed Bohloul, Connor L. Box, Nicholas Boyer, Danilo Simoes Brambila, Gabriel A. Bramley, Kyle R. Bryenton, María Camarasa-Gómez, Christian Carbogno, Fabio Caruso, Sucismita Chutia, Michele Ceriotti, Gábor Csányi, William Dawson, Francisco A. Delesma , et al. (177 additional authors not shown)

Abstract: Electronic-structure theory is the foundation of the description of materials including multiscale modeling of their properties and functions. Obviously, without sufficient accuracy at the base, reliable predictions are unlikely at any level that follows. The software package FHI-aims has proven to be a game changer for accurate free-energy calculations because of its scalability, numerical precis… ▽ More Electronic-structure theory is the foundation of the description of materials including multiscale modeling of their properties and functions. Obviously, without sufficient accuracy at the base, reliable predictions are unlikely at any level that follows. The software package FHI-aims has proven to be a game changer for accurate free-energy calculations because of its scalability, numerical precision, and its efficient handling of density functional theory (DFT) with hybrid functionals and van der Waals interactions. It treats molecules, clusters, and extended systems (solids and liquids) on an equal footing. Besides DFT, FHI-aims also includes quantum-chemistry methods, descriptions for excited states and vibrations, and calculations of various types of transport. Recent advancements address the integration of FHI-aims into an increasing number of workflows and various artificial intelligence (AI) methods. This Roadmap describes the state-of-the-art of FHI-aims and advancements that are currently ongoing or planned. △ Less

Submitted 5 June, 2025; v1 submitted 30 April, 2025; originally announced May 2025.

Comments: arXiv admin note: Includes articles arXiv:2502.02460, arXiv:2501.02550, arXiv:2411.01680, arXiv:2501.16091, arXiv:2411.04951

Magnetically Enhanced Fenton-Like Processes by Nanofibers: Real-Time Observation of Tetracycline Degradation in Pig Manure Wastewater

Authors: Berta Centro Elía, Marco Antonio Morales, Vanina G. Franco, Jesús Antonio Fuentes García, Gerardo F. Goya

Abstract: This study presents a novel approach for the degradation of tetracycline (TC) in pig manure wastewater using magnet-ite-based magnetic nanofibers (MNFs) as heterogeneous Fenton-like catalysts. The MNFs, composed of polyacrylonitrile (PAN) embedded with MnFe_2O_4 nanoparticles, were synthesized via electrospinning and exhibited high stability and catalytic efficiency. The degradation process was dr… ▽ More This study presents a novel approach for the degradation of tetracycline (TC) in pig manure wastewater using magnet-ite-based magnetic nanofibers (MNFs) as heterogeneous Fenton-like catalysts. The MNFs, composed of polyacrylonitrile (PAN) embedded with MnFe_2O_4 nanoparticles, were synthesized via electrospinning and exhibited high stability and catalytic efficiency. The degradation process was driven by hydroxyl radical (OH) formation through hydrogen peroxide (H2O2) activation on the MNF surface. The results showed that TC was first adsorbed onto the MNFs before undergoing oxidation, with treatment efficiency increasing with H2O2 concentration up to an optimum point, due to increased OH scavenging by H_2O_2. A heterogeneous dynamic kinetic model (DKM) was developed to describe the degradation mechanism, incorporating reactive oxygen species (ROS) generation, catalyst surface inactivation, and polymer strip-ping effects. Furthermore, the application of an alternating magnetic field significantly accelerated the reaction rate, likely due to localized heating effects. This study highlights the potential of MNFs as a scalable, reusable and efficient alternative for antibiotic-contaminated wastewater treatment, offering advantages over conventional homogeneous Fenton processes by minimizing iron sludge formation and broadening the operational pH range. △ Less

Submitted 25 April, 2025; originally announced April 2025.

Comments: 16 pages, 12 figures

The Stochastic Light Confinement of LiquidO

Authors: LiquidO Collaboration, J. Apilluelo, L. Asquith, E. F. Bannister, N. P. Barradas, J. L. Beney, M. Berberan e Santos, X. de la Bernardie, T. J. C. Bezerra, M. Bongrand, C. Bourgeois, D. Breton, C. Buck, J. Busto, K. Burns, A. Cabrera, A. Cadiou, E. Calvo, E. Chauveau, B. J. Cattermole, M. Chen, P. Chimenti, D. F. Cowen, S. Dusini, A. Earle , et al. (72 additional authors not shown)

Abstract: Light-based detectors have been widely used in fundamental research and industry since their inception in the 1930s. The energy particles deposit in these detectors is converted to optical signals via the Cherenkov and scintillation mechanisms that are then propagated through transparent media to photosensors placed typically on the detector's periphery, sometimes up to tens of metres away. Liquid… ▽ More Light-based detectors have been widely used in fundamental research and industry since their inception in the 1930s. The energy particles deposit in these detectors is converted to optical signals via the Cherenkov and scintillation mechanisms that are then propagated through transparent media to photosensors placed typically on the detector's periphery, sometimes up to tens of metres away. LiquidO is a new technique pioneering the use of opaque media to stochastically confine light around each energy deposition while collecting it with an array of fibres that thread the medium. This approach preserves topological event information otherwise lost in the conventional approach, enabling real-time imaging down to the MeV scale. Our article demonstrates LiquidO's imaging principle with a ten-litre prototype, revealing successful light confinement of 90% of the detected light within a 5 cm radius sphere, using a custom opaque scintillator with a scattering length on the order of a few millimetres. These high-resolution imaging capabilities unlock opportunities in fundamental physics research and applications beyond. The absolute amount of light detected is also studied, including possible data-driven extrapolations to LiquidO-based detectors beyond prototyping limitations. Additionally, LiquidO's timing capabilities are explored through its ability to distinguish Cherenkov light from a slow scintillator. △ Less

Submitted 12 March, 2025; v1 submitted 4 March, 2025; originally announced March 2025.

Comments: 22 pages, 9 figures, 2 tables

COCOA: a compact Compton camera for astrophysical observation of MeV-scale gamma rays

Authors: LiquidO Collaboration, S. R. Soleti, J. J. Gómez-Cadenas, J. Apilluelo, L. Asquith, E. F. Bannister, N. P. Barradas, C. L. Baylis, J. L. Beney, M. Berberan e Santos, X. de la Bernardie, T. J. C. Bezerra, M. Bongrand, C. Bourgeois, D. Breton, J. Busto, K. Burns, A. Cabrera, A. Cadiou, E. Calvo, M. de Carlos Generowicz, E. Chauveau, B. J. Cattermole, M. Chen, P. Chimenti , et al. (67 additional authors not shown)

Abstract: COCOA (COmpact COmpton cAmera) is a next-generation gamma-ray telescope designed for astrophysical observations in the MeV energy range. The detector comprises a scatterer volume employing the LiquidO detection technology and an array of scintillating crystals acting as absorber. Surrounding plastic scintillator panels serve as a veto system for charged particles. The detector's compact, scalable… ▽ More COCOA (COmpact COmpton cAmera) is a next-generation gamma-ray telescope designed for astrophysical observations in the MeV energy range. The detector comprises a scatterer volume employing the LiquidO detection technology and an array of scintillating crystals acting as absorber. Surrounding plastic scintillator panels serve as a veto system for charged particles. The detector's compact, scalable design enables flexible deployment on microsatellites or high-altitude balloons. Gamma rays at MeV energies have not been well explored historically (the so-called "MeV gap") and COCOA has the potential to improve the sensitivity in this energy band. △ Less

Submitted 12 May, 2025; v1 submitted 28 February, 2025; originally announced February 2025.

Comments: 14 pages, 17 figures

Journal ref: Astropart. Phys. 172 (2025) 103135

Deterministic fabrication of GaAs-quantum-dot micropillar single-photon sources

Authors: Abdulmalik A. Madigawa, Martin Arentoft Jacobsen, Claudia Piccinini, Paweł Wyborski, Ailton Garcia Jr., Saimon F. Covre da Silva, Armando Rastelli, Battulga Munkhbat, Niels Gregersen

Abstract: This study investigates the performance of droplet-etched GaAs quantum dots (QDs) integrated into micropillar structures using a deterministic fabrication technique. We demonstrate a unity QD positioning yield across 74 devices and consistent device performance. Under p-shell excitation, the QD decay dynamics within the micropillars exhibit biexponential behavior, accompanied by intensity fluctuat… ▽ More This study investigates the performance of droplet-etched GaAs quantum dots (QDs) integrated into micropillar structures using a deterministic fabrication technique. We demonstrate a unity QD positioning yield across 74 devices and consistent device performance. Under p-shell excitation, the QD decay dynamics within the micropillars exhibit biexponential behavior, accompanied by intensity fluctuations limiting the source efficiency to < 4.5%. Charge stabilization via low-power above-band LED excitation effectively reduces these fluctuations, doubling the source efficiency to $\sim$ 9%. Moreover, we introduce suppression of radiation modes by introducing cylindrical rings theoretically predicted to boost the collection efficiency by a factor of 4. Experimentally, only a modest improvement is obtained, underscoring the influence of even minor fabrication imperfections for this advanced design. Our findings demonstrate the reliability of our deterministic fabrication approach in producing high-yield, uniform devices, while offering detailed insights into the influence of charge noise and complex relaxation dynamics on the performance. △ Less

Submitted 13 February, 2025; originally announced February 2025.

Solvers for Large-Scale Electronic Structure Theory: ELPA and ELSI

Authors: Petr Karpov, Andreas Marek, Tobias Melson, Alexander Pöppl, Victor Wen-zhe Yu, Ben Hourahine, Alberto Garcia, William Dawson, Yi Yao, William Huhn, Jonathan Moussa, Sam Hall, Reinhard Maurer, Uthpala Herath, Konstantin Lion, Sebastian Kokott, Volker Blum

Abstract: In this contribution, we give an overview of the ELPA library and ELSI interface, which are crucial elements for large-scale electronic structure calculations in FHI-aims. ELPA is a key solver library that provides efficient solutions for both standard and generalized eigenproblems, which are central to the Kohn-Sham formalism in density functional theory (DFT). It supports CPU and GPU architect… ▽ More In this contribution, we give an overview of the ELPA library and ELSI interface, which are crucial elements for large-scale electronic structure calculations in FHI-aims. ELPA is a key solver library that provides efficient solutions for both standard and generalized eigenproblems, which are central to the Kohn-Sham formalism in density functional theory (DFT). It supports CPU and GPU architectures, with full support for NVIDIA and AMD GPUs, and ongoing development for Intel GPUs. Here we also report the results of recent optimizations, leading to significant improvements in GPU performance for the generalized eigenproblem. ELSI is an open-source software interface layer that creates a well-defined connection between "user" electronic structure codes and "solver" libraries for the Kohn-Sham problem, abstracting the step between Hamilton and overlap matrices (as input to ELSI and the respective solvers) and eigenvalues and eigenvectors or density matrix solutions (as output to be passed back to the "user" electronic structure code). In addition to ELPA, ELSI supports solvers including LAPACK and MAGMA, the PEXSI and NTPoly libraries (which bypass an explicit eigenvalue solution), and several others. △ Less

Submitted 4 February, 2025; originally announced February 2025.

Comments: Contribution to the upcoming Roadmap for Advancements of the FHI-aims Software Package

Molecular Fluctuations Inhibit Intermittency in Compressible Turbulence

Authors: Ishan Srivastava, Andrew J. Nonaka, Weiqun Zhang, Alejandro L. Garcia, John B. Bell

Abstract: In the standard picture of fully-developed turbulence, highly intermittent hydrodynamic fields are nonlinearly coupled across scales, where local energy cascades from large scales into dissipative vortices and large density gradients. Microscopically, however, constituent fluid molecules are in constant thermal (Brownian) motion, but the role of molecular fluctuations on large-scale turbulence is… ▽ More In the standard picture of fully-developed turbulence, highly intermittent hydrodynamic fields are nonlinearly coupled across scales, where local energy cascades from large scales into dissipative vortices and large density gradients. Microscopically, however, constituent fluid molecules are in constant thermal (Brownian) motion, but the role of molecular fluctuations on large-scale turbulence is largely unknown, and with rare exceptions, it has historically been considered irrelevant at scales larger than the molecular mean free path. Recent theoretical and computational investigations have shown that molecular fluctuations can impact energy cascade at Kolmogorov length scales. Here we show that molecular fluctuations not only modify energy spectrum at wavelengths larger than the Kolmogorov length in compressible turbulence, but they also significantly inhibit spatio-temporal intermittency across the entire dissipation range. Using large-scale direct numerical simulations of computational fluctuating hydrodynamics, we demonstrate that the extreme intermittency characteristic of turbulence models is replaced by nearly-Gaussian statistics in the dissipation range. These results demonstrate that the compressible Navier-Stokes equations should be augmented with molecular fluctuations to accurately predict turbulence statistics across the dissipation range. Our findings have significant consequences for turbulence modeling in applications such as astrophysics, reactive flows, and hypersonic aerodynamics, where dissipation-range turbulence is approximated by closure models. △ Less

Submitted 10 January, 2025; originally announced January 2025.

Comments: 13 pages, 5 figures

Femtosecond temperature measurements of laser-shocked copper deduced from the intensity of the x-ray thermal diffuse scattering

Authors: J. S. Wark, D. J. Peake, T. Stevens, P. G. Heighway, Y. Ping, P. Sterne, B. Albertazzi, S. J. Ali, L. Antonelli, M. R. Armstrong, C. Baehtz, O. B. Ball, S. Banerjee, A. B. Belonoshko, C. A. Bolme, V. Bouffetier, R. Briggs, K. Buakor, T. Butcher, S. Di Dio Cafiso, V. Cerantola, J. Chantel, A. Di Cicco, A. L. Coleman, J. Collier , et al. (100 additional authors not shown)

Abstract: We present 50-fs, single-shot measurements of the x-ray thermal diffuse scattering (TDS) from copper foils that have been shocked via nanosecond laser-ablation up to pressures above 135~GPa. We hence deduce the x-ray Debye-Waller (DW) factor, providing a temperature measurement. The targets were laser-shocked with the DiPOLE 100-X laser at the High Energy Density (HED) endstation of the European X… ▽ More We present 50-fs, single-shot measurements of the x-ray thermal diffuse scattering (TDS) from copper foils that have been shocked via nanosecond laser-ablation up to pressures above 135~GPa. We hence deduce the x-ray Debye-Waller (DW) factor, providing a temperature measurement. The targets were laser-shocked with the DiPOLE 100-X laser at the High Energy Density (HED) endstation of the European X-ray Free-Electron Laser (EuXFEL). Single x-ray pulses, with a photon energy of 18 keV, were scattered from the samples and recorded on Varex detectors. Despite the targets being highly textured (as evinced by large variations in the elastic scattering), and with such texture changing upon compression, the absolute intensity of the azimuthally averaged inelastic TDS between the Bragg peaks is largely insensitive to these changes, and, allowing for both Compton scattering and the low-level scattering from a sacrificial ablator layer, provides a reliable measurement of $T/Θ_D^2$, where $Θ_D$ is the Debye temperature. We compare our results with the predictions of the SESAME 3336 and LEOS 290 equations of state for copper, and find good agreement within experimental errors. We thus demonstrate that single-shot temperature measurements of dynamically compressed materials can be made via thermal diffuse scattering of XFEL radation. △ Less

Submitted 6 January, 2025; originally announced January 2025.

Comments: 17 pages, 9 figures in main article; 10 pages, 5 figures in supplementary material

Micromegas with GEM preamplification for enhanced energy threshold in low-background gaseous time projection chambers

Authors: J. Castel, S. Cebrián, T. Dafni, D. Díez-Ibáñez, J. Galán, J. A. García, A. Ezquerro, I. G Irastorza, G. Luzón, C. Margalejo, H. Mirallas, L. Obis, A. Ortiz de Solórzano, O. Pérez, J. Porrón, M. J. Puyuelo

Abstract: Background: we develop the concept of a Micromegas (MICRO-MEsh GAseous Structure) readout plane with an additional GEM (Gas Electron Multiplier) preamplification stage placed a few mm above it, to increase the maximum effective gain of the combined readout. We implement it and test it in realistic conditions for its application to low-background dark matter searches like the TREX-DM experiment. Me… ▽ More Background: we develop the concept of a Micromegas (MICRO-MEsh GAseous Structure) readout plane with an additional GEM (Gas Electron Multiplier) preamplification stage placed a few mm above it, to increase the maximum effective gain of the combined readout. We implement it and test it in realistic conditions for its application to low-background dark matter searches like the TREX-DM experiment. Methods: for this, we use a Micromegas of microbulk type, built with radiopure materials. A small test chamber allowing for systematic scanning of voltages and pressures is used. In addition, a TREX-DM full-scale set-up has also been built and tested, featuring a replica of the fully-patterned TREX-DM microbulk readout. Results: we report on GEM effective extra gain factors of about 90, 50 and 20 in 1, 4 and 10 bar of Ar-1%iC$_{4}$H$_{10}$. Conclusions: the results here obtained show promise to lower the threshold of the experiment down to 50 eV$_{ee}$, corresponding to substantially enhanced sensitivity to low-mass WIMPs (Weakly Interacting Massive Particles). △ Less

Submitted 20 May, 2025; v1 submitted 26 December, 2024; originally announced December 2024.

Comments: 15 pages, 8 figures, corresponding authors: Óscar Pérez ([email protected]), Héctor Mirallas ([email protected])

Journal ref: Open Res Europe 2025, 5:53

Thermodynamic consistency and fluctuations in mesoscopic stochastic simulations of reactive gas mixtures

Authors: Matteo Polimeno, Changho Kim, François Blanchette, Ishan Srivastava, Alejandro L. Garcia, Andy J. Nonaka, John B. Bell

Abstract: It is essential that mesoscopic simulations of reactive systems reproduce the correct statistical distributions at thermodynamic equilibrium. By considering a compressible fluctuating hydrodynamics (FHD) simulation method of ideal gas mixtures undergoing reversible reactions described by the chemical Langevin equations, we show that thermodynamic consistency in reaction rates and the use of instan… ▽ More It is essential that mesoscopic simulations of reactive systems reproduce the correct statistical distributions at thermodynamic equilibrium. By considering a compressible fluctuating hydrodynamics (FHD) simulation method of ideal gas mixtures undergoing reversible reactions described by the chemical Langevin equations, we show that thermodynamic consistency in reaction rates and the use of instantaneous temperatures for the evaluation of reaction rates is required for fluctuations for the overall system to be correct. We then formulate the required properties of a thermodynamically-consistent reaction (TCR) model. As noted in the literature, while reactions are often discussed in terms of forward and reverse rates, these rates should not be modeled independently because they must be compatible with thermodynamic equilibrium for the system. Using a simple TCR model where each chemical species has constant heat capacity, we derive the explicit condition that the forward and reverse reaction rate constants must satisfy in order for the system to be thermodynamically consistent. We perform equilibrium and non-equilibrium simulations of ideal gas mixtures undergoing a reversible dimerization reaction to measure the fluctuational behavior of the system numerically. We confirm that FHD simulations with the TCR model give the correct static structure factor of equilibrium fluctuations. For the statistically steady simulation of a gas mixture between two isothermal walls with different temperatures, we show using the TCR model that the temperature variance agrees with the corresponding thermodynamic-equilibrium temperature variance in the interior of the system, whereas noticeable deviations are present in regions near walls, where chemistry is far from equilibrium. △ Less

Submitted 20 March, 2025; v1 submitted 9 December, 2024; originally announced December 2024.

An accurate solar axions ray-tracing response of BabyIAXO

Authors: S. Ahyoune, K. Altenmueller, I. Antolin, S. Basso, P. Brun, F. R. Candon, J. F. Castel, S. Cebrian, D. Chouhan, R. Della Ceca, M. Cervera-Cortes, V. Chernov, M. M. Civitani, C. Cogollos, E. Costa, V. Cotroneo, T. Dafni, A. Derbin, K. Desch, M. C. Diaz-Martin, A. Diaz-Morcillo, D. Diez-Ibanez, C. Diez Pardos, M. Dinter, B. Doebrich , et al. (102 additional authors not shown)

Abstract: BabyIAXO is the intermediate stage of the International Axion Observatory (IAXO) to be hosted at DESY. Its primary goal is the detection of solar axions following the axion helioscope technique. Axions are converted into photons in a large magnet that is pointing to the sun. The resulting X-rays are focused by appropriate X-ray optics and detected by sensitive low-background detectors placed at th… ▽ More BabyIAXO is the intermediate stage of the International Axion Observatory (IAXO) to be hosted at DESY. Its primary goal is the detection of solar axions following the axion helioscope technique. Axions are converted into photons in a large magnet that is pointing to the sun. The resulting X-rays are focused by appropriate X-ray optics and detected by sensitive low-background detectors placed at the focal spot. The aim of this article is to provide an accurate quantitative description of the different components (such as the magnet, optics, and X-ray detectors) involved in the detection of axions. Our efforts have focused on developing robust and integrated software tools to model these helioscope components, enabling future assessments of modifications or upgrades to any part of the IAXO axion helioscope and evaluating the potential impact on the experiment's sensitivity. In this manuscript, we demonstrate the application of these tools by presenting a precise signal calculation and response analysis of BabyIAXO's sensitivity to the axion-photon coupling. Though focusing on the Primakoff solar flux component, our virtual helioscope model can be used to test different production mechanisms, allowing for direct comparisons within a unified framework. △ Less

Submitted 29 November, 2024; v1 submitted 21 November, 2024; originally announced November 2024.

Comments: 36 pages, 18 figures, 4 tables, Submitted to JHEP

Resilient Stellarator Divertor Characteristics in the Helically Symmetric eXperiment

Authors: K. A. Garcia, A. Bader, D. Boeyaert, A. H. Boozer, H. Frerichs, M. J. Gerard, A. Punjabi, O. Schmitz

Abstract: Resilient divertor features connected to open chaotic edge structures in the Helically Symmetric Experiment (HSX) are investigated. For the first time, an expanded vessel wall was considered that would give space for implementation of a physical divertor target structure. The analysis was done for four different magnetic configurations with very different chaotic plasma edges. A resilient plasma w… ▽ More Resilient divertor features connected to open chaotic edge structures in the Helically Symmetric Experiment (HSX) are investigated. For the first time, an expanded vessel wall was considered that would give space for implementation of a physical divertor target structure. The analysis was done for four different magnetic configurations with very different chaotic plasma edges. A resilient plasma wall interaction pattern was identified across all configurations. This manifests as qualitatively very similar footprint behavior across the different plasma equilibria. Overall, the resilient field lines of interest with high connection length $L_C$ lie within a helical band along the wall for all configurations. This resiliency can be used to identify the best location of a divertor. The details of the magnetic footprint's resilient helical band is subject to specific field line structures which are linked to the penetration depth of field lines into the plasma and directly influence the heat and particle flux patterns. The differences arising from these details are characterized by introducing a new metric, the minimum radial connection $\text{min}(δ_N)$ of a field line from the last closed flux surface. The relationship, namely the deviation from a scaling law, between $\text{min}(δ_N)$ and $L_C$ of the field lines in the plasma edge field line behavior suggests that the field lines are associated with structures such as resonant islands, cantori, and turnstiles. This helps determine the relevant magnetic flux channels based on the radial location of these chaotic edge structures and the divertor target footprint. These details will need to be taken into account for resilient divertor design. △ Less

Submitted 14 February, 2025; v1 submitted 15 November, 2024; originally announced November 2024.

Comments: 18 pages, 10 figures; minor revisions, results unchanged

Journal ref: K A Garcia et al 2025 Plasma Phys. Control. Fusion 67 035011

A Study of Spherical and Sessile Droplet Dynamics by Fluctuating Hydrodynamics

Authors: John B. Bell, Andrew Nonaka, Alejandro L. Garcia

Abstract: We simulate the mesoscopic dynamics of droplets formed by phase separated fluids at nanometer scales where thermal fluctuations are significant. Both spherical droplets fully immersed in a second fluid and sessile droplets which are also in contact with a solid surface are studied. Our model combines a Cahn-Hillard formulation with incompressible fluctuating hydrodynamics; for sessile droplets the… ▽ More We simulate the mesoscopic dynamics of droplets formed by phase separated fluids at nanometer scales where thermal fluctuations are significant. Both spherical droplets fully immersed in a second fluid and sessile droplets which are also in contact with a solid surface are studied. Our model combines a Cahn-Hillard formulation with incompressible fluctuating hydrodynamics; for sessile droplets the fluid-solid contact angle is specified as a boundary condition. Deterministic simulations with an applied body force are used to measure the droplets' mobility from which a diffusion coefficient is obtained using the Einstein relation. Stochastic simulations are independently used to obtain a diffusion coefficient from a linear fit of the variance of a droplet's position with time. In some scenarios these two measurements give the same value but not in the case of a spherical droplet initialized near a slip wall or in the case of sessile droplets with large contact angles (greater than 90 degrees) on both slip and no-slip surfaces. △ Less

Submitted 14 November, 2024; originally announced November 2024.

Temporal reversibility of reactive systems out of equilibrium: Molecular dynamics simulation

Authors: O. Politano, Alejandro L. Garcia, F. Baras, M. Malek Mansour

Abstract: The second law of thermodynamics states that entropy production in macroscopic systems is non-negative, reaching zero only at thermodynamic equilibrium. As a corollary, this implies that the state trajectory of macroscopic systems is inherently time-irreversible under out-of-equilibrium conditions. However, over the past half-century, various studies have shown that this principle does not univers… ▽ More The second law of thermodynamics states that entropy production in macroscopic systems is non-negative, reaching zero only at thermodynamic equilibrium. As a corollary, this implies that the state trajectory of macroscopic systems is inherently time-irreversible under out-of-equilibrium conditions. However, over the past half-century, various studies have shown that this principle does not universally apply to the composition sample paths of certain isothermal reactive systems. Theoretical frameworks leading to this surprising observation primarily focus on perfectly homogeneous systems (often referred to as zero-dimensional systems), which inherently exclude the effects of local fluctuations. This oversimplification may account for the paradoxical theoretical predictions. In the absence of relevant experimental data, this paper seeks to explore this phenomenon through microscopic simulations. △ Less

Submitted 29 January, 2025; v1 submitted 25 October, 2024; originally announced October 2024.

The fixed probe storage ring magnetometer for the Muon g-2 experiment at Fermi National Accelerator Laboratory

Authors: Erik Swanson, Martin Fertl, Alejandro Garcia, Cole Helling, Ronaldo Ortez, Rachel Osofsky, David A. Peterson, Rene Reimann, Matthias W. Smith, Tim D. Van Wechel

Abstract: The goal of the FNAL E989 experiment is to measure the muon magnetic anomaly to unprecedented accuracy and precision at the Fermi National Accelerator Laboratory. To meet this goal, the time and space averaged magnetic environment in the muon storage volume must be known to better than 70 ppb. A new pulsed proton nuclear magnetic resonance (NMR) magnetometer was designed and built at the Universit… ▽ More The goal of the FNAL E989 experiment is to measure the muon magnetic anomaly to unprecedented accuracy and precision at the Fermi National Accelerator Laboratory. To meet this goal, the time and space averaged magnetic environment in the muon storage volume must be known to better than 70 ppb. A new pulsed proton nuclear magnetic resonance (NMR) magnetometer was designed and built at the University of Washington, Seattle to track the temporal stability of the 1.45T magnetic field in the muon storage ring at this precision. It consists of an array of 378 petroleum jelly based NMR probes that are embedded in the walls of muon storage ring vacuum chambers and custom electronics built with readily available modular radio frequency (RF) components. We give NMR probe construction details and describe the functions of the custom electronic subsystems. The excellent performance metrics of the magnetometer are discussed, where after 8 years of operation the median single shot resolution of the array of probes remains at 650 ppb. △ Less

Submitted 7 January, 2025; v1 submitted 10 October, 2024; originally announced October 2024.

Comments: 19 pages, 20 figures

Report number: FERMILAB-PUB-24-0770-V

Learning Physics From Video: Unsupervised Physical Parameter Estimation for Continuous Dynamical Systems

Authors: Alejandro Castañeda Garcia, Jan van Gemert, Daan Brinks, Nergis Tömen

Abstract: Extracting physical dynamical system parameters from recorded observations is key in natural science. Current methods for automatic parameter estimation from video train supervised deep networks on large datasets. Such datasets require labels, which are difficult to acquire. While some unsupervised techniques--which depend on frame prediction--exist, they suffer from long training times, initializ… ▽ More Extracting physical dynamical system parameters from recorded observations is key in natural science. Current methods for automatic parameter estimation from video train supervised deep networks on large datasets. Such datasets require labels, which are difficult to acquire. While some unsupervised techniques--which depend on frame prediction--exist, they suffer from long training times, initialization instabilities, only consider motion-based dynamical systems, and are evaluated mainly on synthetic data. In this work, we propose an unsupervised method to estimate the physical parameters of known, continuous governing equations from single videos suitable for different dynamical systems beyond motion and robust to initialization. Moreover, we remove the need for frame prediction by implementing a KL-divergence-based loss function in the latent space, which avoids convergence to trivial solutions and reduces model size and compute. We first evaluate our model on synthetic data, as commonly done. After which, we take the field closer to reality by recording Delfys75: our own real-world dataset of 75 videos for five different types of dynamical systems to evaluate our method and others. Our method compares favorably to others. %, yet, and real-world video datasets and demonstrate improved parameter estimation accuracy compared to existing methods. Code and data are available online:https://github.com/Alejandro-neuro/Learning_physics_from_video. △ Less

Submitted 24 March, 2025; v1 submitted 2 October, 2024; originally announced October 2024.

Magnetic mesh generation and field line reconstruction for scrape-off layer and divertor modeling in stellarators

Authors: H. Frerichs, D. Boeyaert, Y. Feng, K. A. Garcia

Abstract: The design of divertor targets and baffles for optimal heat and particle exhaust from magnetically confined fusion plasmas requires a combination of fast, low-fidelity models (such as EMC3-lite [1]) for scoping studies and high-fidelity ones (such as EMC3-EIRENE [2]) for verification. Both of those approaches benefit from a magnetic flux tube mesh for fast interpolation and mapping of field line s… ▽ More The design of divertor targets and baffles for optimal heat and particle exhaust from magnetically confined fusion plasmas requires a combination of fast, low-fidelity models (such as EMC3-lite [1]) for scoping studies and high-fidelity ones (such as EMC3-EIRENE [2]) for verification. Both of those approaches benefit from a magnetic flux tube mesh for fast interpolation and mapping of field line segments [3]. A new mesh generator for unstructured quadrilateral flux tubes with adaptive refinement is presented and integrated into FLARE [4]. For HSX with an extended first wall, it is found that several layers of flux tubes can span the entire half field period before splitting is required. This is an advantage over the traditional setup of the EMC3-EIRENE mesh where careful construction of several sub-domains is required already for the much tighter present first wall. The divide and conquer paradigm with unstructured mesh layout offers a powerful alternative for integration into optimization workflows. Further examples for W7-X and CTH are presented. △ Less

Submitted 12 February, 2025; v1 submitted 1 October, 2024; originally announced October 2024.

Comments: 15 pages, 8 figures

Microsecond-Latency Feedback at a Particle Accelerator by Online Reinforcement Learning on Hardware

Authors: Luca Scomparin, Michele Caselle, Andrea Santamaria Garcia, Chenran Xu, Edmund Blomley, Timo Dritschler, Akira Mochihashi, Marcel Schuh, Johannes L. Steinmann, Erik Bründermann, Andreas Kopmann, Jürgen Becker, Anke-Susanne Müller, Marc Weber

Abstract: The commissioning and operation of future large-scale scientific experiments will challenge current tuning and control methods. Reinforcement learning (RL) algorithms are a promising solution thanks to their capability of autonomously tackling a control problem based on a task parameterized by a reward function. The conventionally utilized machine learning (ML) libraries are not intended for micro… ▽ More The commissioning and operation of future large-scale scientific experiments will challenge current tuning and control methods. Reinforcement learning (RL) algorithms are a promising solution thanks to their capability of autonomously tackling a control problem based on a task parameterized by a reward function. The conventionally utilized machine learning (ML) libraries are not intended for microsecond latency applications, as they mostly optimize for throughput performance. On the other hand, most of the programmable logic implementations are meant for computation acceleration, not being intended to work in a real-time environment. To overcome these limitations of current implementations, RL needs to be deployed on-the-edge, i.e. on to the device gathering the training data. In this paper we present the design and deployment of an experience accumulator system in a particle accelerator. In this system deep-RL algorithms run using hardware acceleration and act within a few microseconds, enabling the use of RL for control of ultra-fast phenomena. The training is performed offline to reduce the number of operations carried out on the acceleration hardware. The proposed architecture was tested in real experimental conditions at the Karlsruhe research accelerator (KARA), serving also as a synchrotron light source, where the system was used to control induced horizontal betatron oscillations in real-time. The results showed a performance comparable to the commercial feedback system available at the accelerator, proving the viability and potential of this approach. Due to the self-learning and reconfiguration capability of this implementation, its seamless application to other control problems is possible. Applications range from particle accelerators to large-scale research and industrial facilities. △ Less

Submitted 24 September, 2024; originally announced September 2024.

Personalized Federated Learning for improving radar based precipitation nowcasting on heterogeneous areas

Authors: Judith Sáinz-Pardo Díaz, María Castrillo, Juraj Bartok, Ignacio Heredia Cachá, Irina Malkin Ondík, Ivan Martynovskyi, Khadijeh Alibabaei, Lisana Berberi, Valentin Kozlov, Álvaro López García

Abstract: The increasing generation of data in different areas of life, such as the environment, highlights the need to explore new techniques for processing and exploiting data for useful purposes. In this context, artificial intelligence techniques, especially through deep learning models, are key tools to be used on the large amount of data that can be obtained, for example, from weather radars. In many… ▽ More The increasing generation of data in different areas of life, such as the environment, highlights the need to explore new techniques for processing and exploiting data for useful purposes. In this context, artificial intelligence techniques, especially through deep learning models, are key tools to be used on the large amount of data that can be obtained, for example, from weather radars. In many cases, the information collected by these radars is not open, or belongs to different institutions, thus needing to deal with the distributed nature of this data. In this work, the applicability of a personalized federated learning architecture, which has been called adapFL, on distributed weather radar images is addressed. To this end, given a single available radar covering 400 km in diameter, the captured images are divided in such a way that they are disjointly distributed into four different federated clients. The results obtained with adapFL are analyzed in each zone, as well as in a central area covering part of the surface of each of the previously distributed areas. The ultimate goal of this work is to study the generalization capability of this type of learning technique for its extrapolation to use cases in which a representative number of radars is available, whose data can not be centralized due to technical, legal or administrative concerns. The results of this preliminary study indicate that the performance obtained in each zone with the adapFL approach allows improving the results of the federated learning approach, the individual deep learning models and the classical Continuity Tracking Radar Echoes by Correlation approach. △ Less

Submitted 11 August, 2024; originally announced August 2024.

Comments: Accepted for publication in Earth Science Informatics

Design, Construction, and Test of Compact, Distributed-Charge, X-Band Accelerator Systems that Enable Image-Guided, VHEE FLASH Radiotherapy

Authors: Christopher P. J. Barty, J. Martin Algots, Alexander J. Amador, James C. R. Barty, Shawn M. Betts, Marcelo A. Castañeda, Matthew M. Chu, Michael E. Daley, Ricardo A. De Luna Lopez, Derek A. Diviak, Haytham H. Effarah, Roberto Feliciano, Adan Garcia, Keith J. Grabiel, Alex S. Griffin, Frederic V. Hartemann, Leslie Heid, Yoonwoo Hwang, Gennady Imeshev, Michael Jentschel, Christopher A. Johnson, Kenneth W. Kinosian, Agnese Lagzda, Russell J. Lochrie, Michael W. May , et al. (18 additional authors not shown)

Abstract: The design and optimization of laser-Compton x-ray systems based on compact distributed charge accelerator structures can enable micron-scale imaging of disease and the concomitant production of beams of Very High Energy Electrons (VHEEs) capable of producing FLASH-relevant dose rates. The physics of laser-Compton x-ray scattering ensures that the scattered x-rays follow exactly the trajectory of… ▽ More The design and optimization of laser-Compton x-ray systems based on compact distributed charge accelerator structures can enable micron-scale imaging of disease and the concomitant production of beams of Very High Energy Electrons (VHEEs) capable of producing FLASH-relevant dose rates. The physics of laser-Compton x-ray scattering ensures that the scattered x-rays follow exactly the trajectory of the incident electrons, thus providing a route to image-guided, VHEE FLASH radiotherapy. The keys to a compact architecture capable of producing both laser-Compton x-rays and VHEEs are the use of X-band RF accelerator structures which have been demonstrated to operate with over 100 MeV/m acceleration gradients. The operation of these structures in a distributed charge mode in which each radiofrequency (RF) cycle of the drive RF pulse is filled with a low-charge, high-brightness electron bunch is enabled by the illumination of a high-brightness photogun with a train of UV laser pulses synchronized to the frequency of the underlying accelerator system. The UV pulse trains are created by a patented pulse synthesis approach which utilizes the RF clock of the accelerator to phase and amplitude modulate a narrow band continuous wave (CW) seed laser. In this way it is possible to produce up to 10 $μ$A of average beam current from the accelerator. Such high current from a compact accelerator enables production of sufficient x-rays via laser-Compton scattering for clinical imaging and does so from a machine of "clinical" footprint. At the same time, the production of 1000 or greater individual micro-bunches per RF pulse enables > 10 nC of charge to be produced in a macrobunch of < 100 ns. The design, construction, and test of the 100-MeV class prototype system in Irvine, CA is also presented. △ Less

Submitted 2 January, 2025; v1 submitted 7 August, 2024; originally announced August 2024.

Comments: Accepted by Frontiers in Physics; Changes: expanded section 6, added numerical spectrum plot to Figure 10, expanded table 2 info, added citations; 29 pages, 13 figures, 2 tables

Journal ref: Front Phys 12:1472759 (2024) 1-18

First search for dark photon dark matter with a MADMAX prototype

Authors: J. Egge, D. Leppla-Weber, S. Knirck, B. Ary dos Santos Garcia, D. Bergermann, A. Caldwell, V. Dabhi, C. Diaconu, J. Diehl, G. Dvali, M. Ekmedžić, F. Gallo, E. Garutti, S. Heyminck, F. Hubaut, A. Ivanov, J. Jochum, P. Karst, M. Kramer, D. Kreikemeyer-Lorenzo, C. Krieger, C. Lee, A. Lindner, J. P. A. Maldonado, B. Majorovits , et al. (21 additional authors not shown)

Abstract: We report the first result from a dark photon dark matter search in the mass range from ${78.62}$ to $83.95~\mathrm{μeV}/c^2$ with a dielectric haloscope prototype for MADMAX (Magnetized Disc and Mirror Axion eXperiment). Putative dark photons would convert to observable photons within a stack consisting of three sapphire disks and a mirror. The emitted power of this system is received by an anten… ▽ More We report the first result from a dark photon dark matter search in the mass range from ${78.62}$ to $83.95~\mathrm{μeV}/c^2$ with a dielectric haloscope prototype for MADMAX (Magnetized Disc and Mirror Axion eXperiment). Putative dark photons would convert to observable photons within a stack consisting of three sapphire disks and a mirror. The emitted power of this system is received by an antenna and successively digitized using a low-noise receiver. No dark photon signal has been observed. Assuming unpolarized dark photon dark matter with a local density of $ρ_χ=0.3~\mathrm{GeV/cm^3}$ we exclude a dark photon to photon mixing parameter $χ> 2.7 \times 10^{-12}$ over the full mass range and $χ> 1.1 \times 10^{-13}$ at a mass of $80.57~\mathrm{μeV}/c^2$ with a 95\% confidence level. This is the first physics result from a MADMAX prototype and exceeds previous constraints on $χ$ in this mass range by up to almost three orders of magnitude. △ Less

Submitted 7 March, 2025; v1 submitted 5 August, 2024; originally announced August 2024.

Comments: v2 (Adapted to match published version. Fixed a mistake in the dark matter lineshape leading to a ~10% improvement in the limit)

Machine learning accelerated prediction of Ce-based ternary compounds involving antagonistic pairs

Authors: Weiyi Xia, Wei-Shen Tee, Paul C. Canfield, Fernando Assis Garcia, Raquel D Ribeiro, Yongbin Lee, Liqin Ke, Rebecca Flint, Cai-Zhuang Wang

Abstract: The discovery of novel quantum materials within ternary phase spaces containing antagonistic pair such as Fe with Bi, Pb, In, and Ag, presents significant challenges yet holds great potential. In this work, we investigate the stabilization of these immiscible pairs through the integration of Cerium (Ce), an abundant rare-earth and cost-effective element. By employing a machine learning (ML)-guided… ▽ More The discovery of novel quantum materials within ternary phase spaces containing antagonistic pair such as Fe with Bi, Pb, In, and Ag, presents significant challenges yet holds great potential. In this work, we investigate the stabilization of these immiscible pairs through the integration of Cerium (Ce), an abundant rare-earth and cost-effective element. By employing a machine learning (ML)-guided framework, particularly crystal graph convolutional neural networks (CGCNN), combined with first-principles calculations, we efficiently explore the composition/structure space and predict 9 stable and 37 metastable Ce-Fe-X (X=Bi, Pb, In and Ag) ternary compounds. Our findings include the identification of multiple new stable and metastable phases, which are evaluated for their structural and energetic properties. These discoveries not only contribute to the advancement of quantum materials but also offer viable alternatives to critical rare earth elements, underscoring the importance of Ce-based intermetallic compounds in technological applications. △ Less

Submitted 17 February, 2025; v1 submitted 15 July, 2024; originally announced July 2024.

First mechanical realization of a tunable dielectric haloscope for the MADMAX axion search experiment

Authors: The MADMAX Collaboration, B. Ary Dos Santos Garcia, D. Bergermann, A. Caldwell, V. Dabhi, C. Diaconu, J. Diehl, G. Dvali, J. Egge, M. Ekmedzic, F. Gallo, E. Garutti, S. Heyminck, F. Hubaut, A. Ivanov, J. Jochum, P. Karst, M. Kramer, D. Kreikemeyer-Lorenzo, C. Krieger, D. Leppla-Weber, A. Lindner, J. Maldonado, B. Majorovits, S. Martens , et al. (14 additional authors not shown)

Abstract: MADMAX, a future experiment to search for axion dark matter, is based on a novel detection concept called the dielectric haloscope. It consists of a booster composed of several dielectric disks positioned with $μ$m precision. A prototype composed of one movable disk was built to demonstrate the mechanical feasibility of such a booster in the challenging environment of the experiment: high magnetic… ▽ More MADMAX, a future experiment to search for axion dark matter, is based on a novel detection concept called the dielectric haloscope. It consists of a booster composed of several dielectric disks positioned with $μ$m precision. A prototype composed of one movable disk was built to demonstrate the mechanical feasibility of such a booster in the challenging environment of the experiment: high magnetic field to convert the axions into photons and cryogenic temperature to reduce the thermal noise. It was tested both inside a strong magnetic field up to 1.6 T and at cryogenic temperatures down to 35K. The measurements of the velocity and positioning accuracy of the disk are shown and are found to match the MADMAX requirements. △ Less

Submitted 11 November, 2024; v1 submitted 15 July, 2024; originally announced July 2024.

Comments: 14 pages, 9 figures

Journal ref: JINST 19 T11002 (2024)

An Introduction to Computational Fluctuating Hydrodynamics

Authors: Alejandro L. Garcia, John B. Bell, Andrew Nonaka, Ishan Srivastava, Daniel Ladiges, Changho Kim

Abstract: These notes are an introduction to fluctuating hydrodynamics (FHD) and the formulation of numerical schemes for the resulting stochastic partial differential equations (PDEs). Fluctuating hydrodynamics was originally introduced by Landau and Lifshitz as a way to put thermal fluctuations into a continuum framework by including a stochastic forcing to each dissipative transport process (e.g., heat f… ▽ More These notes are an introduction to fluctuating hydrodynamics (FHD) and the formulation of numerical schemes for the resulting stochastic partial differential equations (PDEs). Fluctuating hydrodynamics was originally introduced by Landau and Lifshitz as a way to put thermal fluctuations into a continuum framework by including a stochastic forcing to each dissipative transport process (e.g., heat flux). While FHD has been useful in modeling transport and fluid dynamics at the mesoscopic scale, theoretical calculations have been feasible only with simplifying assumptions. As such there is great interest in numerical schemes for Computational Fluctuating Hydrodynamics (CFHD). There are a variety of algorithms (e.g., spectral, finite element, lattice Boltzmann) but in this introduction we focus on finite volume schemes. Accompanying these notes is a demonstration program in Python available on GitHub (https://github.com/AlejGarcia/IntroFHD). △ Less

Submitted 30 April, 2025; v1 submitted 17 June, 2024; originally announced June 2024.

Effects of Mosaic Crystal Instrument Functions on X-ray Thomson Scattering Diagnostics

Authors: Thomas Gawne, Hannah Bellenbaum, Luke B. Fletcher, Karen Appel, Carsten Baehtz, Victorien Bouffetier, Erik Brambrink, Danielle Brown, Attila Cangi, Adrien Descamps, Sebastian Göde, Nicholas J. Hartley, Marie-Luise Herbert, Philipp Hesselbach, Hauke Höppner, Oliver S. Humphries, Zuzana Konôpková, Alejandro Laso Garcia, Björn Lindqvist, Julian Lütgert, Michael J. MacDonald, Mikako Makita, Willow Martin, Mikhail Mishchenko, Zhandos A. Moldabekov , et al. (14 additional authors not shown)

Abstract: Mosaic crystals, with their high integrated reflectivities, are widely-employed in spectrometers used to diagnose high energy density systems. X-ray Thomson scattering (XRTS) has emerged as a powerful diagnostic tool of these systems, providing in principle direct access to important properties such as the temperature via detailed balance. However, the measured XRTS spectrum is broadened by the sp… ▽ More Mosaic crystals, with their high integrated reflectivities, are widely-employed in spectrometers used to diagnose high energy density systems. X-ray Thomson scattering (XRTS) has emerged as a powerful diagnostic tool of these systems, providing in principle direct access to important properties such as the temperature via detailed balance. However, the measured XRTS spectrum is broadened by the spectrometer instrument function (IF), and without careful consideration of the IF one risks misdiagnosing system conditions. Here, we consider in detail the IF of 40 $μ$m and 100 $μ$m mosaic HAPG crystals, and how the broadening varies across the spectrometer in an energy range of 6.7-8.6 keV. Notably, we find a strong asymmetry in the shape of the IF towards higher energies. As an example, we consider the effect of the asymmetry in the IF on the temperature inferred via XRTS for simulated 80 eV CH plasmas, and find that the temperature can be overestimated if an approximate symmetric IF is used. We therefore expect a detailed consideration of the full IF will have an important impact on system properties inferred via XRTS in both forward modelling and model-free approaches. △ Less

Submitted 9 August, 2024; v1 submitted 5 June, 2024; originally announced June 2024.

Comments: 19 pages, 13 figures

Acceptance Tests of more than 10 000 Photomultiplier Tubes for the multi-PMT Digital Optical Modules of the IceCube Upgrade

Authors: R. Abbasi, M. Ackermann, J. Adams, S. K. Agarwalla, J. A. Aguilar, M. Ahlers, J. M. Alameddine, N. M. Amin, K. Andeen, C. Argüelles, Y. Ashida, S. Athanasiadou, L. Ausborm, S. N. Axani, X. Bai, A. Balagopal V., M. Baricevic, S. W. Barwick, S. Bash, V. Basu, R. Bay, J. J. Beatty, J. Becker Tjus, J. Beise, C. Bellenghi , et al. (399 additional authors not shown)

Abstract: More than 10,000 photomultiplier tubes (PMTs) with a diameter of 80 mm will be installed in multi-PMT Digital Optical Modules (mDOMs) of the IceCube Upgrade. These have been tested and pre-calibrated at two sites. A throughput of more than 1000 PMTs per week with both sites was achieved with a modular design of the testing facilities and highly automated testing procedures. The testing facilities… ▽ More More than 10,000 photomultiplier tubes (PMTs) with a diameter of 80 mm will be installed in multi-PMT Digital Optical Modules (mDOMs) of the IceCube Upgrade. These have been tested and pre-calibrated at two sites. A throughput of more than 1000 PMTs per week with both sites was achieved with a modular design of the testing facilities and highly automated testing procedures. The testing facilities can easily be adapted to other PMTs, such that they can, e.g., be re-used for testing the PMTs for IceCube-Gen2. Single photoelectron response, high voltage dependence, time resolution, prepulse, late pulse, afterpulse probabilities, and dark rates were measured for each PMT. We describe the design of the testing facilities, the testing procedures, and the results of the acceptance tests. △ Less

Submitted 20 June, 2024; v1 submitted 30 April, 2024; originally announced April 2024.

Comments: 24 pages, 19 figures, 2 tables, submitted to JINST

Bounds on heavy axions with an X-ray free electron laser

Authors: Jack W. D. Halliday, Giacomo Marocco, Konstantin A. Beyer, Charles Heaton, Motoaki Nakatsutsumi, Thomas R. Preston, Charles D. Arrowsmith, Carsten Baehtz, Sebastian Goede, Oliver Humphries, Alejandro Laso Garcia, Richard Plackett, Pontus Svensson, Georgios Vacalis, Justin Wark, Daniel Wood, Ulf Zastrau, Robert Bingham, Ian Shipsey, Subir Sarkar, Gianluca Gregori

Abstract: We present new exclusion bounds obtained at the European X-ray Free Electron Laser facility (EuXFEL) on axion-like particles (ALPs) in the mass range 10^{-3} eV < m_a < 10^4 eV. Our experiment exploits the Primakoff effect via which photons can, in the presence of a strong external electric field, decay into axions, which then convert back into photons after passing through an opaque wall. While s… ▽ More We present new exclusion bounds obtained at the European X-ray Free Electron Laser facility (EuXFEL) on axion-like particles (ALPs) in the mass range 10^{-3} eV < m_a < 10^4 eV. Our experiment exploits the Primakoff effect via which photons can, in the presence of a strong external electric field, decay into axions, which then convert back into photons after passing through an opaque wall. While similar searches have been performed previously at a 3^rd generation synchrotron, our work demonstrates improved sensitivity, exploiting the higher brightness of X-rays at EuXFEL. △ Less

Submitted 7 February, 2025; v1 submitted 26 April, 2024; originally announced April 2024.

Comments: 7 pages, 6 figures

Journal ref: Physical Review Letters 134, 055001 (2025)

Using Micromegas detectors for direct dark matter searches: challenges and perspectives

Authors: K. Altenmueller, . Antolin, D. Calvet, F. R. Candon, J. Castel, S. Cebrian, C. Cogollos, T. Dafni, D. Diez Ibanez, E. Ferrer-Ribas, J. Galan, J. A. Garcia, H. Gomez, Y. Gu, A. Ezquerro, I. G Irastorza, G. Luzon, C. Margalejo, H. Mirallas, L. Obis, A. Ortiz de Solorzano, T. Papaevangelou, O. Perez, E. Picatoste, J. Porron , et al. (5 additional authors not shown)

Abstract: Gas time projection chambers (TPCs) with Micromegas pixelated readouts are being used in dark matter searches and other rare event searches, due to their potential in terms of low background levels, energy and spatial resolution, gain, and operational stability. Moreover, these detectors can provide precious features,such as topological information, allowing for event directionality and powerful s… ▽ More Gas time projection chambers (TPCs) with Micromegas pixelated readouts are being used in dark matter searches and other rare event searches, due to their potential in terms of low background levels, energy and spatial resolution, gain, and operational stability. Moreover, these detectors can provide precious features,such as topological information, allowing for event directionality and powerful signal-background discrimination. The Micromegas technology of the microbulk type is particularly suited to low-background applications and is being exploited by detectors for CAST and IAXO (solar axions) and TREX-DM (low-mass WIMPs) experiments. Challenges for the future include reducing intrinsic background levels, reaching lower energy detection levels, and technical issues such as robustness of detector, new design choices, novel gas mixtures and operation points, scaling up to larger detector sizes, handling large readout granularity, etc. We report on the status and prospects of the development ongoing in the context of IAXO and TREX-DM experiments, pointing to promising perspectives for the use of Micromegas detectors in directdark matter searches △ Less

Submitted 15 April, 2024; originally announced April 2024.

Comment on "Brownian motion of droplets induced by thermal noise"

Authors: J. B. Bell, A. Nonaka, A. L. Garcia

Abstract: We simulate phase separated fluids using the Cahn-Hillard fluctuating hydrodynamic (CH-FHD) model and measure the statistical properties of capillary waves generated by thermal fluctuations. Our measurements are in good agreement with stochastic lubrication theory and molecular dynamics simulations but differ significantly from recent CH-FHD results by Zhang et al. (Phys. Rev. E 109 024208 (2024))… ▽ More We simulate phase separated fluids using the Cahn-Hillard fluctuating hydrodynamic (CH-FHD) model and measure the statistical properties of capillary waves generated by thermal fluctuations. Our measurements are in good agreement with stochastic lubrication theory and molecular dynamics simulations but differ significantly from recent CH-FHD results by Zhang et al. (Phys. Rev. E 109 024208 (2024)). Specifically, we find that capillary wave statistics at thermodynamic equilibrium are independent of transport properties, namely viscosity and species diffusion. △ Less

Submitted 1 April, 2024; originally announced April 2024.

Comments: Comment on arXiv:2311.13320

Background discrimination with a Micromegas detector prototype and veto system for BabyIAXO

Authors: K. Altenmüller, J. F. Castel, S. Cebrián, T. Dafni, D. Díez-Ibañez, A. Ezquerro, E. Ferrer-Ribas, J. Galan, J. Galindo, J. A. García, A. Giganon, C. Goblin, I. G. Irastorza, C. Loiseau, G. Luzón, X. F. Navick, C. Margalejo, H. Mirallas, L. Obis, A. Ortiz de Solórzano, T. Papaevangelou, O. Pérez, A. Quintana, J. Ruz, J. K. Vogel

Abstract: In this paper we present measurements performed with a Micromegas X-ray detector setup. The detector is a prototype in the context of the BabyIAXO helioscope, which is under construction to search for an emission of the hypothetical axion particle from the sun. An important component of such a helioscope is a low background X-ray detector with a high efficiency in the 1-10 keV energy range. The go… ▽ More In this paper we present measurements performed with a Micromegas X-ray detector setup. The detector is a prototype in the context of the BabyIAXO helioscope, which is under construction to search for an emission of the hypothetical axion particle from the sun. An important component of such a helioscope is a low background X-ray detector with a high efficiency in the 1-10 keV energy range. The goal of the measurement was to study techniques for background discrimination. In addition to common techniques we used a multi-layer veto system designed to tag cosmogenic neutron background. Over an effective time of 52 days, a background level of $8.6 \times 10^{-7}\,\text{counts keV}^{-1}\,\text{cm}^{-2} \, \text{s}^{-1}$ was reached in a laboratory at above ground level. This is the lowest background level achieved at surface level. In this paper we present the experimental setup, show simulations of the neutron-induced background, and demonstrate the process to identify background signals in the data. Finally, prospects to reach lower background levels down to $10^{-7} \, \text{counts keV}^{-1} \, \text{cm}^{-2} \, \text{s}^{-1}$ will be discussed. △ Less

Submitted 10 March, 2024; originally announced March 2024.

Improved modeling of in-ice particle showers for IceCube event reconstruction

Authors: R. Abbasi, M. Ackermann, J. Adams, S. K. Agarwalla, J. A. Aguilar, M. Ahlers, J. M. Alameddine, N. M. Amin, K. Andeen, G. Anton, C. Argüelles, Y. Ashida, S. Athanasiadou, L. Ausborm, S. N. Axani, X. Bai, A. Balagopal V., M. Baricevic, S. W. Barwick, S. Bash, V. Basu, R. Bay, J. J. Beatty, J. Becker Tjus, J. Beise , et al. (394 additional authors not shown)

Abstract: The IceCube Neutrino Observatory relies on an array of photomultiplier tubes to detect Cherenkov light produced by charged particles in the South Pole ice. IceCube data analyses depend on an in-depth characterization of the glacial ice, and on novel approaches in event reconstruction that utilize fast approximations of photoelectron yields. Here, a more accurate model is derived for event reconstr… ▽ More The IceCube Neutrino Observatory relies on an array of photomultiplier tubes to detect Cherenkov light produced by charged particles in the South Pole ice. IceCube data analyses depend on an in-depth characterization of the glacial ice, and on novel approaches in event reconstruction that utilize fast approximations of photoelectron yields. Here, a more accurate model is derived for event reconstruction that better captures our current knowledge of ice optical properties. When evaluated on a Monte Carlo simulation set, the median angular resolution for in-ice particle showers improves by over a factor of three compared to a reconstruction based on a simplified model of the ice. The most substantial improvement is obtained when including effects of birefringence due to the polycrystalline structure of the ice. When evaluated on data classified as particle showers in the high-energy starting events sample, a significantly improved description of the events is observed. △ Less

Submitted 22 April, 2024; v1 submitted 4 March, 2024; originally announced March 2024.

Comments: 28 pages, 18 figures, 1 table, submitted to JINST, updated to account for comments received

Journal ref: 2024 JINST 19 P06026

Cylindrical compression of thin wires by irradiation with a Joule-class short pulse laser

Authors: Alejandro Laso Garcia, Long Yang, Victorien Bouffetier, Karen Apple, Carsten Baehtz, Johannes Hagemann, Hauke Höppner, Oliver Humphries, Mikhail Mishchenko, Motoaki Nakatsutsumi, Alexander Pelka, Thomas R. Preston, Lisa Randolph, Ulf Zastrau, Thomas E. Cowan, Lingen Huang, Toma Toncian

Abstract: Equation of state measurements at Jovian or stellar conditions are currently conducted by dynamic shock compression driven by multi-kilojoule multi-beam nanosecond-duration lasers. These experiments require precise design of the target and specific tailoring of the spatial and temporal laser profiles to reach the highest pressures. At the same time, the studies are limited by the low repetition ra… ▽ More Equation of state measurements at Jovian or stellar conditions are currently conducted by dynamic shock compression driven by multi-kilojoule multi-beam nanosecond-duration lasers. These experiments require precise design of the target and specific tailoring of the spatial and temporal laser profiles to reach the highest pressures. At the same time, the studies are limited by the low repetition rate of the lasers. Here, we show that by the irradiation of a thin wire with single beam Joule-class short-pulse laser, a converging cylindrical shock is generated compressing the wire material to conditions relevant for the above applications. The shockwave was observed using Phase Contrast Imaging employing a hard X-ray Free Electron Laser with unprecedented temporal and spatial sensitivity. The data collected for Cu wires is in agreement with hydrodynamic simulations of an ablative shock launched by a highly-impulsive and transient resistive heating of the wire surface. The subsequent cylindrical shockwave travels towards the wire axis and is predicted to reach a compression factor of 9 and pressures above 800 Mbar. Simulations for astrophysical relevant materials underline the potential of this compression technique as a new tool for high energy density studies at high repetition rates. △ Less

Submitted 10 February, 2024; originally announced February 2024.

Crustal velocity and strain rate fields in the Balearic Islands based on continuous GPS time series from the XGAIB network (2010-2013)

Authors: A. Sánchez Alzola, C. Sánchez, J. Giménez, P. Alfaro García, B. Gelabert, M. J. Borque-Arancón, A. J. Gil

Abstract: In this paper, we present a first estimation, using the GIPSY-OASIS software, of the crustal velocity and strain rate fields in the Balearic Islands (Spain), based on continuous GPS observations from the XGAIB network spanning the period 2010-2013. The XGAIB network consists of nine permanent, widely distributed stations that have operated continuously since 2010. In this paper, we describe the XG… ▽ More In this paper, we present a first estimation, using the GIPSY-OASIS software, of the crustal velocity and strain rate fields in the Balearic Islands (Spain), based on continuous GPS observations from the XGAIB network spanning the period 2010-2013. The XGAIB network consists of nine permanent, widely distributed stations that have operated continuously since 2010. In this paper, we describe the XGAIB network and the CGPS data processing and present our principle results in terms of the position time series and velocities of all of the sites, which were observed for more than three and a half years. In addition, strain tensors were estimated from the velocity field to obtain the first realistic crustal deformation model of the archipelago. The strains exhibit gradual variation across the Balearic Islands, from WNW-ESE extension in the southwest (Ibiza and Formentera) to NW-SE compression in the northeast (Menorca). These results constitute an advance in our knowledge of the tectonics of the western Mediterranean region. △ Less

Submitted 6 February, 2024; originally announced February 2024.

Journal ref: Journal of Geodynamics 82. 2014 (78-86)

Return level estimations for extreme rainfall over the Iberian Peninsula: comparing methodologies

Authors: F. J. Acero, S. Parey, J. A. García, D. Dacunha-Castelle

Abstract: Different ways to estimate future return levels for extreme rainfall are described and applied to the Iberian Peninsula (IP), based on Extreme Value Theory (EVT). This study is made for an ensemble of high quality rainfall time series observed in the Iberian Peninsula over the period 1961-2010. Both, peaks-over-threshold (POT) approach and block maxima with the Generalized Extreme Value (GEV) dist… ▽ More Different ways to estimate future return levels for extreme rainfall are described and applied to the Iberian Peninsula (IP), based on Extreme Value Theory (EVT). This study is made for an ensemble of high quality rainfall time series observed in the Iberian Peninsula over the period 1961-2010. Both, peaks-over-threshold (POT) approach and block maxima with the Generalized Extreme Value (GEV) distribution will be used and their results compared when linear trends are assumed in the parameters: threshold and scale parameter for POT and location and scale parameter for GEV. Both all-days and rainy-days-only data sets were considered, because rainfall over the IP is a special variable in that a large number of the values are 0. Another methodology is then tested, for rainy days only, considering the role of how the mean, variance, and number of rainy days evolve. The 20-year return levels (RLs) expected in 2020 were estimated using these methodologies for three seasons: fall, spring and winter. GEV is less reliable than POT because fixed blocks lead to the selection of non-extreme values. Future RLs obtained with POT are higher than those estimated with GEV, mainly for some gauges showing significant positive trend for the number of rainy days. Fall becomes the season with heaviest rainfall, rather than winter nowadays, for some regions. △ Less

Submitted 1 February, 2024; originally announced February 2024.

Comments: 16 pages, 11 figures

Changes in heat waves characteristics over Extremadura (SW Spain)

Authors: F. J. Acero, M. I. Fernández-Fernández, V. M. S. Carrasco, S. Parey, T. T. Huong Hoang, D. Dacunha-Castelle, J. A. García

Abstract: Heat wave (HW) events are becoming more frequent, and they have important consequences because of the negative effects they can have not only on the human population in health terms, but also on biodiversity and agriculture. This motivated a study of the trends in HW events over Extremadura, a region in the southwest of Spain, with much of its area in summer devoted to the production of irrigated… ▽ More Heat wave (HW) events are becoming more frequent, and they have important consequences because of the negative effects they can have not only on the human population in health terms, but also on biodiversity and agriculture. This motivated a study of the trends in HW events over Extremadura, a region in the southwest of Spain, with much of its area in summer devoted to the production of irrigated crops such as maize and tomatoes. Heat waves were defined for the study as two consecutive days with temperatures above the 95th percentile of the summer (June-August) maximum temperature (Tmax) time series. Two datasets were used: one consisted of 13 daily temperature records uniformly distributed over the Region, and the other was the SPAIN02 gridded observational dataset, extracting just the points corresponding to Extremadura. The trends studied were in the duration, intensity, and frequency of HW events, and in other parameters such as the mean, low (25th percentile), and high (75th percentile) values. In general terms, the results showed significant positive trends in those parameters over the east, the northwest, and a small area in the south of the Region. In order to study changes in HW characteristics (duration, frequency and intensity) considering different subperiods, a stochastic model was used to generate 1000 time series equivalent to the observed ones. The results showed that there were no significant changes in HW duration in the last 10-year subperiod in comparison with the first. But the results were different for warm events (WE), defined with a lower threshold (the 75th percentile), which are also important for agriculture. For several sites, there were significant changes in WE duration, frequency, and intensity. △ Less

Submitted 1 February, 2024; originally announced February 2024.

Comments: 36 pages, 11 figures

A limit for the values of the Dst geomagnetic index

Authors: F. J. Acero, J. M. Vaquero, M. C. Gallego, J. A. García

Abstract: The study of the extreme weather space events is important for a technological dependent society. Extreme Value Theory could be decisive to characterize those extreme events in order to have the knowledge to make decisions in technological, economic and social matters, in all fields with possible impacts. In this work, the hourly values of the Dst geomagnetic index has been studied for the period… ▽ More The study of the extreme weather space events is important for a technological dependent society. Extreme Value Theory could be decisive to characterize those extreme events in order to have the knowledge to make decisions in technological, economic and social matters, in all fields with possible impacts. In this work, the hourly values of the Dst geomagnetic index has been studied for the period 1957-2014 using the peaks-over-threshold technique. The shape parameter obtained from the fit of the generalized Pareto distribution to the extreme values of the |Dst| index leads to a negative value implying an upper bound for this time series. This result is relevant, because the estimation of this limit for the extreme values lead to 850 nT as the highest expected value for this geomagnetic index. Thus, from the previous characterization of the Carrington geomagnetic storm and our results, it could be considered the worst case scenario. △ Less

Submitted 1 February, 2024; originally announced February 2024.

Comments: 12 pages, 5 figures

Structural and optical properties of self-assembled AlN nanowires grown on SiO2/Si substrates by molecular beam epitaxy

Authors: Ž. Gačević, J. Grandal, Q. Guo, R. Kirste, M. Varela, Z. Sitar, M. A. Sánchez García

Abstract: Self assembled AlN nanowires (NWs) are grown by plasma assisted molecular beam epitaxy (PAMBE) on SiO2 / Si (111) substrates. Using a combination of in-situ reflective high energy electron diffraction and ex situ X ray diffraction (XRD), we show that the NWs grow nearly strain free, preferentially perpendicular to the amorphous SiO2 interlayer and without epitaxial relationship to Si(111) substrat… ▽ More Self assembled AlN nanowires (NWs) are grown by plasma assisted molecular beam epitaxy (PAMBE) on SiO2 / Si (111) substrates. Using a combination of in-situ reflective high energy electron diffraction and ex situ X ray diffraction (XRD), we show that the NWs grow nearly strain free, preferentially perpendicular to the amorphous SiO2 interlayer and without epitaxial relationship to Si(111) substrate, as expected. Scanning electron microscopy investigation reveals significant NWs coalescence, which results in their progressively increasing diameter and formation of columnar structures with non hexagonal cross section. Making use of scanning transmission electron microscopy (STEM), the NWs initial diameters are found in the 20 to 30 nm range. In addition, the formation of a thin (30 nm) polycrystalline AlN layer is observed on the substrate surface. Regarding the structural quality of the AlN NWs, STEM measurements reveal the formation of extended columnar regions, which grow with a virtually perfect metal-polarity wurtzite arrangement and with extended defects only sporadically observed. Combination of STEM and electron energy loss spectroscopy (EELS) reveals the formation of continuous aluminum oxide (1 to 2 nm) on the NW surface. Low temperature photoluminescence measurements reveal a single near band edge (NBE) emission peak, positioned at 6.03 eV (at 2 K), a value consistent with nearly zero NW strain evidenced by XRD and in agreement with the values obtained on AlN bulk layers synthesized by other growth techniques. The significant full width at half maximum of NBE emission, found at 20 meV (at 2 K), suggests that free and bound excitons are mixed together within this single emission band. △ Less

Submitted 31 January, 2024; originally announced February 2024.

Comments: 9 pages, 5 figures

Journal ref: Nanotechnology 32 (2021) 195601

Cheetah: Bridging the Gap Between Machine Learning and Particle Accelerator Physics with High-Speed, Differentiable Simulations

Authors: Jan Kaiser, Chenran Xu, Annika Eichler, Andrea Santamaria Garcia

Abstract: Machine learning has emerged as a powerful solution to the modern challenges in accelerator physics. However, the limited availability of beam time, the computational cost of simulations, and the high-dimensionality of optimisation problems pose significant challenges in generating the required data for training state-of-the-art machine learning models. In this work, we introduce Cheetah, a PyTorc… ▽ More Machine learning has emerged as a powerful solution to the modern challenges in accelerator physics. However, the limited availability of beam time, the computational cost of simulations, and the high-dimensionality of optimisation problems pose significant challenges in generating the required data for training state-of-the-art machine learning models. In this work, we introduce Cheetah, a PyTorch-based high-speed differentiable linear-beam dynamics code. Cheetah enables the fast collection of large data sets by reducing computation times by multiple orders of magnitude and facilitates efficient gradient-based optimisation for accelerator tuning and system identification. This positions Cheetah as a user-friendly, readily extensible tool that integrates seamlessly with widely adopted machine learning tools. We showcase the utility of Cheetah through five examples, including reinforcement learning training, gradient-based beamline tuning, gradient-based system identification, physics-informed Bayesian optimisation priors, and modular neural network surrogate modelling of space charge effects. The use of such a high-speed differentiable simulation code will simplify the development of machine learning-based methods for particle accelerators and fast-track their integration into everyday operations of accelerator facilities. △ Less

Submitted 11 January, 2024; originally announced January 2024.

Comments: 16 pages, 9 figures, 3 tables

Report number: PUBDB-2023-07854

Journal ref: Phys. Rev. Accel. Beams 27 (2024) 054601

Searching for WIMPs with TREX-DM: achievements and challenges

Authors: Juan F. Castel, Susana Cebrián, Theopisti Dafni, David Díez-Ibáñez, Álvaro Ezquerro, Javier Galán, Juan Antonio García, Igor G. Irastorza, María Jiménez, Gloria Luzón, Cristina Margalejo, Ángel de Mira, Hector Mirallas, Luis Obis, Alfonso Ortiz de Solórzano, Oscar Pérez, Jaime Ruz, Julia Vogel

Abstract: The TREX-DM detector, a low background chamber with microbulk Micromegas readout, was commissioned in the underground laboratory of Canfranc (LSC) in 2018. Since then, data taking campaigns have been carried out with Argon and Neon mixtures, at different pressures from 1 to 4 bar. By achieving a low energy threshold of 1 keV$_{ee}$ and a background level of 80 counts keV$^{-1}$ Kg$^{-1}$ day… ▽ More The TREX-DM detector, a low background chamber with microbulk Micromegas readout, was commissioned in the underground laboratory of Canfranc (LSC) in 2018. Since then, data taking campaigns have been carried out with Argon and Neon mixtures, at different pressures from 1 to 4 bar. By achieving a low energy threshold of 1 keV$_{ee}$ and a background level of 80 counts keV$^{-1}$ Kg$^{-1}$ day$^{-1}$ in the region from 1 to 7 keV$_{ee}$, the experiment demonstrates its potential to search for low-mass WIMPs. Two of the most important challenges currently faced are the reduction of both, background level and energy threshold. With respect to the energy threshold, recently a new readout plane is being developed, based on the combination of Micromegas and GEM technologies, aiming to have a pre-amplification stage that would permit very low energy thresholds, close to the single-electron ionization energy. With respect to the background reduction, apart from studies to identify and minimize contamination population, a high sensitivity alpha detector is being developed in order to allow a proper material selection for the TREX-DM detector components. Both challenges, together with the optimization of the gas mixture used as target for the WIMP detection, will take TREX-DM to explore regions of WIMP's mass below 1 GeV c$^{-2}$. △ Less

Submitted 19 December, 2023; originally announced December 2023.

Comments: LIDINE 2023: LIght Detection In Noble Elements

Simulations of Thin Polymer Films on Flat and Curved Substrates

Authors: Gabriel Catalini, Nicolás A. García, Daniel A. Vega, Arash Nikoubashman

Abstract: We report molecular dynamics simulation results on the equilibrium properties of polymer thin films adsorbed onto flat and curved substrates. We first systematically determine the contact angle of polymer droplets on flat substrates as a function of the substrate-monomer adsorption strength and degree of polymerization. Focussing on the fully wetted regime, we then investigate the effect of the su… ▽ More We report molecular dynamics simulation results on the equilibrium properties of polymer thin films adsorbed onto flat and curved substrates. We first systematically determine the contact angle of polymer droplets on flat substrates as a function of the substrate-monomer adsorption strength and degree of polymerization. Focussing on the fully wetted regime, we then investigate the effect of the substrate's topography on the polymer film configuration by using substrates with varying mean curvature. We find that polymer chains close to the substrate are significantly stretched (compressed) in regions of high negative (positive) mean curvature. Further, we find partial dewetting near regions of high mean curvature for thin polymer films. For thicker films, the polymers fully cover the substrate and the shape of the liquid-vapor interface largely follows the shape of the substrate. As the film thickness is increased further, the liquid-vapor interface becomes completely flat. These simulation results are corroborated by analytic calculations using a simplified continuum model that treats the adsorbed polymers as an incompressible medium. Our findings show how the substrate topography influences the conformation of individual chains as well as the shape of the entire film. △ Less

Submitted 13 December, 2023; originally announced December 2023.

Comments: 26 pages, 9 figures

Bayesian Optimization Algorithms for Accelerator Physics

Authors: Ryan Roussel, Auralee L. Edelen, Tobias Boltz, Dylan Kennedy, Zhe Zhang, Fuhao Ji, Xiaobiao Huang, Daniel Ratner, Andrea Santamaria Garcia, Chenran Xu, Jan Kaiser, Angel Ferran Pousa, Annika Eichler, Jannis O. Lubsen, Natalie M. Isenberg, Yuan Gao, Nikita Kuklev, Jose Martinez, Brahim Mustapha, Verena Kain, Weijian Lin, Simone Maria Liuzzo, Jason St. John, Matthew J. V. Streeter, Remi Lehe , et al. (1 additional authors not shown)

Abstract: Accelerator physics relies on numerical algorithms to solve optimization problems in online accelerator control and tasks such as experimental design and model calibration in simulations. The effectiveness of optimization algorithms in discovering ideal solutions for complex challenges with limited resources often determines the problem complexity these methods can address. The accelerator physics… ▽ More Accelerator physics relies on numerical algorithms to solve optimization problems in online accelerator control and tasks such as experimental design and model calibration in simulations. The effectiveness of optimization algorithms in discovering ideal solutions for complex challenges with limited resources often determines the problem complexity these methods can address. The accelerator physics community has recognized the advantages of Bayesian optimization algorithms, which leverage statistical surrogate models of objective functions to effectively address complex optimization challenges, especially in the presence of noise during accelerator operation and in resource-intensive physics simulations. In this review article, we offer a conceptual overview of applying Bayesian optimization techniques towards solving optimization problems in accelerator physics. We begin by providing a straightforward explanation of the essential components that make up Bayesian optimization techniques. We then give an overview of current and previous work applying and modifying these techniques to solve accelerator physics challenges. Finally, we explore practical implementation strategies for Bayesian optimization algorithms to maximize their performance, enabling users to effectively address complex optimization challenges in real-time beam control and accelerator design. △ Less

Submitted 5 April, 2024; v1 submitted 9 December, 2023; originally announced December 2023.

Post-fabrication tuning of circular Bragg resonators for enhanced emitter-cavity coupling

Authors: Tobias M. Krieger, Christian Weidinger, Thomas Oberleitner, Gabriel Undeutsch, Michele B. Rota, Naser Tajik, Maximilian Aigner, Quirin Buchinger, Christian Schimpf, Ailton J. Garcia Jr., Saimon F. Covre da Silva, Sven Höfling, Tobias Huber-Loyola, Rinaldo Trotta, Armando Rastelli

Abstract: Solid-state quantum emitters embedded in circular Bragg resonators are attractive due to their ability to emit quantum states of light with high brightness and low multi-photon probability. As for any emitter-microcavity system, fabrication imperfections limit the spatial and spectral overlap of the emitter with the cavity mode, thus limiting their coupling strength. Here, we show that an initial… ▽ More Solid-state quantum emitters embedded in circular Bragg resonators are attractive due to their ability to emit quantum states of light with high brightness and low multi-photon probability. As for any emitter-microcavity system, fabrication imperfections limit the spatial and spectral overlap of the emitter with the cavity mode, thus limiting their coupling strength. Here, we show that an initial spectral mismatch can be corrected after device fabrication by repeated wet chemical etching steps. We demonstrate ~16 nm wavelength tuning for optical modes in AlGaAs resonators on oxide, leading to a 4-fold Purcell enhancement of the emission of single embedded GaAs quantum dots. Numerical calculations reproduce the observations and suggest that the achievable performance of the resonator is only marginally affected in the explored tuning range. We expect the method to be applicable also to circular Bragg resonators based on other material platforms, thus increasing the device yield of cavity-enhanced solid-state quantum emitters. △ Less

Submitted 27 September, 2023; originally announced September 2023.

Reply to "Comment on `Validity of path thermodynamic description of reactive systems: Microscopic simulations'

Authors: F. Baras, A. L. Garcia, M. Malek Mansour

Abstract: The Comment's author argues that a correct description of reactive systems should incorporate the explicit interaction with reservoirs, leading to a unified system-reservoirs entity. However, this proposition has two major flaws. Firstly, as we will emphasize, this entity inherently follows a thermodynamic equilibrium distribution. In the Comment, no indication is provided on how to maintain such… ▽ More The Comment's author argues that a correct description of reactive systems should incorporate the explicit interaction with reservoirs, leading to a unified system-reservoirs entity. However, this proposition has two major flaws. Firstly, as we will emphasize, this entity inherently follows a thermodynamic equilibrium distribution. In the Comment, no indication is provided on how to maintain such a system-reservoirs entity in a non-equilibrium state. Secondly, contrary to the author's claim, the inclusion of system-reservoir interaction in traditional stochastic modeling of reactive systems does not automatically alter the limited applicability of path thermodynamics to problematic reactive systems. We will provide a simple demonstration to illustrate that certain elementary reactions may not involve any changes in reservoir components, which seems to have been overlooked by the author. △ Less

Submitted 11 September, 2023; originally announced September 2023.

Comments: To appear in Physical Review E

Probing Earth's Missing Potassium using the Unique Antimatter Signature of Geoneutrinos

Authors: LiquidO Consortium, :, A. Cabrera, M. Chen, F. Mantovani, A. Serafini, V. Strati, J. Apilluelo, L. Asquith, J. L. Beney, T. J. C. Bezerra, M. Bongrand, C. Bourgeois, D. Breton, M. Briere, J. Busto, A. Cadiou, E. Calvo, V. Chaumat, E. Chauveau, B. J. Cattermole, P. Chimenti, C. Delafosse, H. de Kerret, S. Dusini , et al. (55 additional authors not shown)

Abstract: The formation of the Earth remains an epoch with mysterious puzzles extending to our still incomplete understanding of the planet's potential origin and bulk composition. Direct confirmation of the Earth's internal heat engine was accomplished by the successful observation of geoneutrinos originating from uranium (U) and thorium (Th) progenies, manifestations of the planet's natural radioactivity… ▽ More The formation of the Earth remains an epoch with mysterious puzzles extending to our still incomplete understanding of the planet's potential origin and bulk composition. Direct confirmation of the Earth's internal heat engine was accomplished by the successful observation of geoneutrinos originating from uranium (U) and thorium (Th) progenies, manifestations of the planet's natural radioactivity dominated by potassium (40K) and the decay chains of uranium (238U) and thorium (232Th). This radiogenic energy output is critical to planetary dynamics and must be accurately measured for a complete understanding of the overall heat budget and thermal history of the Earth. Detecting geoneutrinos remains the only direct probe to do so and constitutes a challenging objective in modern neutrino physics. In particular, the intriguing potassium geoneutrinos have never been observed and thus far have been considered impractical to measure. We propose here a novel approach for potassium geoneutrino detection using the unique antimatter signature of antineutrinos to reduce the otherwise overwhelming backgrounds to observing this rarest signal. The proposed detection framework relies on the innovative LiquidO detection technique to enable positron (e+) identification and antineutrino interactions with ideal isotope targets identified here for the first time. We also provide the complete experimental methodology to yield the first potassium geoneutrino discovery. △ Less

Submitted 23 August, 2023; v1 submitted 8 August, 2023; originally announced August 2023.

Exploration of Non-Resonant Divertor Features on the Compact Toroidal Hybrid

Authors: K. A. Garcia, A. Bader, H. Frerichs, G. J. Hartwell, J. C. Schmitt, N. Allen, O. Schmitz

Abstract: Non-resonant divertors (NRDs) separate the confined plasma from the surrounding plasma facing components (PFCs). The resulting striking field line intersection pattern on these PFCs is insensitive to plasma equilibrium effects. However, a complex scrape-off layer (SOL), created by chaotic magnetic topology in the plasma edge, connects the core plasma to the PFCs through varying magnetic flux tubes… ▽ More Non-resonant divertors (NRDs) separate the confined plasma from the surrounding plasma facing components (PFCs). The resulting striking field line intersection pattern on these PFCs is insensitive to plasma equilibrium effects. However, a complex scrape-off layer (SOL), created by chaotic magnetic topology in the plasma edge, connects the core plasma to the PFCs through varying magnetic flux tubes. The Compact Toroidal Hybrid (CTH) serves as a test-bed to study this by scanning across its inductive current. Simulations observe a significant change of the chaotic edge structure and an effective distance between the confined plasma and the instrumented wall targets. The intersection pattern is observed to be a narrow helical band, which we claim is a resilient strike line pattern. However, signatures of finger-like structures, defined as heteroclinic tangles in chaotic domains, within the plasma edge connect the island chains to this resilient pattern. The dominant connection length field lines intersecting the targets are observed via heat flux modelling with EMC3-EIRENE. At low inductive current levels, the excursion of the field lines resembles a limited plasma wall scenario. At high currents, a private flux region is created in the area where the helical strike line pattern splits into two bands. These bands are divertor legs with distinct SOL parallel particle flow channels. The results demonstrate the NRD strike line pattern resiliency within CTH, but also show the underlying chaotic edge structure determining if the configuration is diverted or limited. This work supports future design efforts for a mechanical structure for the NRD. △ Less

Submitted 24 August, 2023; v1 submitted 20 July, 2023; originally announced July 2023.

Comments: 27 pages, 16 figures, 1 table; revised argument in sections 1, 2, 3, and 5, results unchanged

The measurement problem and scientific realism

Authors: Jorge Alberto Manero Orozco, Juan Alberto Guzman Garcia

Abstract: Many attempts have been made to characterise and solve the infamous measurement problem of quantum mechanics by advocating, implicitly or explicitly, different realist perspectives. As a result, we are still uncertain where this problem and its corresponding solution are to be located in the realism-antirealism debate. On the basis of a well-known characterisation of scientific realism, this paper… ▽ More Many attempts have been made to characterise and solve the infamous measurement problem of quantum mechanics by advocating, implicitly or explicitly, different realist perspectives. As a result, we are still uncertain where this problem and its corresponding solution are to be located in the realism-antirealism debate. On the basis of a well-known characterisation of scientific realism, this paper intends to fill this gap by arguing that the quantum description of the processes involved in typical measurements is problematic from a minimal realist point of view, known as semantic realism. △ Less

Submitted 4 October, 2023; v1 submitted 20 June, 2023; originally announced June 2023.

Comments: 22 pages, to be published in a peer-reviewed journal

Above-threshold ionization at laser intensity greater than $10^{20}$ W/cm$^{2}$

Authors: A. Yandow, T. N. Ha, C. Aniculaesei, H. L. Smith, C. G. Richmond, M. M. Spinks, H. J. Quevedo, S. Bruce, M. Darilek, C. Chang, D. A. Garcia, E. Gaul, M. E. Donovan, B. M. Hegelich, T. Ditmire

Abstract: We present the first experimental observation of above-threshold ionization (ATI) electrons produced by ionization of the neon K-shell in a laser field where intensity exceeds 10$^{20}$ W/cm$^{2}$. An array of plastic scintillating calorimeter detectors was used to measure the high-energy electrons at four angles in the laser forward direction. Coarse energy resolution was obtained using aluminum… ▽ More We present the first experimental observation of above-threshold ionization (ATI) electrons produced by ionization of the neon K-shell in a laser field where intensity exceeds 10$^{20}$ W/cm$^{2}$. An array of plastic scintillating calorimeter detectors was used to measure the high-energy electrons at four angles in the laser forward direction. Coarse energy resolution was obtained using aluminum filters of several thicknesses to block lower-energy electrons. A threshold intensity around $2 \times 10^{20}$ W/cm$^{2}$ is observed for production of energetic ATI electrons in the laser forward direction, with maximum electron energy exceeding 10 MeV. L-shell electrons with energies < 1.4 MeV are scattered further forward along the laser direction than expected. We present comparisons of the measured total electron energies to the predictions of a Monte Carlo models employing the ADK-PPT ionization model and the Augst barrier suppression ionization model. △ Less

Submitted 16 June, 2023; originally announced June 2023.

Report number: LLNL-JRNL-849251

Multi-MeV electrons from above-threshold ionization of the neon K-shell

Authors: A. Yandow, T. N. Ha, C. Aniculaesei, H. L. Smith, C. G. Richmond, M. M. Spinks, H. J. Quevedo, S. Bruce, M. Darilek, C. Chang, D. A. Garcia, E. Gaul, M. E. Donovan, B. M. Hegelich, T. Ditmire

Abstract: We present measurements of integrated electron energies produced by above-threshold ionization (ATI) of neon in a laser field with intensity exceeding 10$^{20}$ W/cm$^{2}$. We observe electrons with energy exceeding 10 MeV ejected in the laser forward direction above a threshold intensity of $2 \times 10^{20}$ W/cm$^{2}$. We compare to ATI models using both tunneling (ADK-PPT) and barrier suppress… ▽ More We present measurements of integrated electron energies produced by above-threshold ionization (ATI) of neon in a laser field with intensity exceeding 10$^{20}$ W/cm$^{2}$. We observe electrons with energy exceeding 10 MeV ejected in the laser forward direction above a threshold intensity of $2 \times 10^{20}$ W/cm$^{2}$. We compare to ATI models using both tunneling (ADK-PPT) and barrier suppression ionization and observe the onset of ATI at a higher threshold intensity than predicted by these models. △ Less

Submitted 16 June, 2023; originally announced June 2023.

Report number: LLNL-JRNL-849250

Learning to Do or Learning While Doing: Reinforcement Learning and Bayesian Optimisation for Online Continuous Tuning

Authors: Jan Kaiser, Chenran Xu, Annika Eichler, Andrea Santamaria Garcia, Oliver Stein, Erik Bründermann, Willi Kuropka, Hannes Dinter, Frank Mayet, Thomas Vinatier, Florian Burkart, Holger Schlarb

Abstract: Online tuning of real-world plants is a complex optimisation problem that continues to require manual intervention by experienced human operators. Autonomous tuning is a rapidly expanding field of research, where learning-based methods, such as Reinforcement Learning-trained Optimisation (RLO) and Bayesian optimisation (BO), hold great promise for achieving outstanding plant performance and reduci… ▽ More Online tuning of real-world plants is a complex optimisation problem that continues to require manual intervention by experienced human operators. Autonomous tuning is a rapidly expanding field of research, where learning-based methods, such as Reinforcement Learning-trained Optimisation (RLO) and Bayesian optimisation (BO), hold great promise for achieving outstanding plant performance and reducing tuning times. Which algorithm to choose in different scenarios, however, remains an open question. Here we present a comparative study using a routine task in a real particle accelerator as an example, showing that RLO generally outperforms BO, but is not always the best choice. Based on the study's results, we provide a clear set of criteria to guide the choice of algorithm for a given tuning task. These can ease the adoption of learning-based autonomous tuning solutions to the operation of complex real-world plants, ultimately improving the availability and pushing the limits of operability of these facilities, thereby enabling scientific and engineering advancements. △ Less

Submitted 6 June, 2023; originally announced June 2023.

Comments: 17 pages, 8 figures, 2 tables