-
Measurement of plutonium isotopes, 239Pu and 240Pu, in air-filter samples from Seville (2001-2002)
Authors:
E. Chamizo,
M. García-León,
S. M. Enamorado,
M. C. Jiménez-Ramos,
L. Wacker
Abstract:
Since the last nuclear atmospheric test carried out by the People Republic of China in 1980 and since the Chernobyl accident in 1986, the plutonium hasn't been directly released into the atmosphere. However, nowadays, it is still present in the troposphere. This is due to plutonium-bearing soil particles physical resuspension processes. In this work, we study for the first time the temporal variat…
▽ More
Since the last nuclear atmospheric test carried out by the People Republic of China in 1980 and since the Chernobyl accident in 1986, the plutonium hasn't been directly released into the atmosphere. However, nowadays, it is still present in the troposphere. This is due to plutonium-bearing soil particles physical resuspension processes. In this work, we study for the first time the temporal variation of plutonium isotopes, 239Pu and 240Pu, baseline concentrations on a monthly basis in surface air from Seville (Spain), and their correlation with some tracers of mineral dust, during 2001 and 2002. The Pu analyses were performed by low-energy Accelerator Mass Spectrometry (AMS). The 239Pu plus 240Pu (239+240Pu) activity levels achieved maximums during the summer period, characterized by the absence of rains, and minimums during the rainy seasons, laying in the range 1-20 nBq per cubic meter. The 240Pu/239Pu two-year average atomic ratio was 0.18(0.03), in agreement with the fallout plutonium. A good correlation with Pu and Al and Ti levels is observed. They are crustal components usually used as tracers of African dust over European countries. The hypothesis of the influence of the Saharan dust intrusions is supported as well through the study of Total Ozone Mass Spectrometer (TOMS) daily images.
△ Less
Submitted 23 January, 2025;
originally announced February 2025.
-
Characterisation of the plutonium isotopic composition of a sediment core from Palomares, Spain, by low-energy AMS and alpha-spectrometry
Authors:
E. Chamizo,
M. C. Jiménez-Ramos,
S. M. Enamorado,
M. García-León,
R. García-Tenorio,
J. L. Mas,
P. Masqué,
J. Merino,
J. A. Sanchez-Cabeza
Abstract:
The measurement of plutonium isotopes, 239Pu and 240Pu, at 670 kV on the compact accelerator mass spectrometry (AMS) system at the Centro Nacional de Aceleradores (CNA) in Seville, Spain, is now a reality. In this work, we present first Pu AMS results for environmental samples: a sediment core collected in a submarine canyon in the Mediterranean coast of the Spanish region of Palomares, affected b…
▽ More
The measurement of plutonium isotopes, 239Pu and 240Pu, at 670 kV on the compact accelerator mass spectrometry (AMS) system at the Centro Nacional de Aceleradores (CNA) in Seville, Spain, is now a reality. In this work, we present first Pu AMS results for environmental samples: a sediment core collected in a submarine canyon in the Mediterranean coast of the Spanish region of Palomares, affected by a nuclear accident in 1966. From the study of the 240Pu/239Pu atomic ratio profile, showing on average levels lower than 11%, we confirm that the weapon-grade plutonium released on land during the accident, with a characteristic 240Pu/239Pu atomic ratio of 5.8%, has found its way into the marine environment. A two-plutonium sources mixture model (Palomares and fallout) is used to elucidate the percentage of the plutonium coming from the accident. As a validation exercise of the Pu AMS measuring technique and in order to obtain the 238Pu/(239+240)Pu activity ratios, samples were also studied by alpha-spectrometry (AS). The obtained AS 239+240Pu activity concentration results fit in with the AMS ones in a wide dynamic range, thus validating the AMS technique.
△ Less
Submitted 23 January, 2025;
originally announced January 2025.
-
Isolation of Pu-isotopes from environmental samples using ion chromatography for accelerator mass spectrometry and alpha spectrometry
Authors:
Elena Chamizo,
María del Carmen Jiménez-Ramos,
Lukas Wacker,
Ignacio Vioque,
Ana Calleja,
Rafael García-Tenorio,
Manuel García-León
Abstract:
A radiochemical method for the isolation of plutonium isotopes from environmental samples, based on the use of specific chromatography resins for actinides (TEVA, Eichrom Industries), has been set up in our laboratory and optimised for their posterior determination by alpha spectrometry (AS) or accelerator mass spectrometry (AMS). The proposed radiochemical method has replaced in our lab a well es…
▽ More
A radiochemical method for the isolation of plutonium isotopes from environmental samples, based on the use of specific chromatography resins for actinides (TEVA, Eichrom Industries), has been set up in our laboratory and optimised for their posterior determination by alpha spectrometry (AS) or accelerator mass spectrometry (AMS). The proposed radiochemical method has replaced in our lab a well established one based on the use of a relatively un-specific anion-exchange resin (AG1X8, Biorad), because it is clearly less time consuming, reduces the amounts and molarities of acid wastes produced, and reproducibly gives high radiochemical yields.
In order to check the reliability of the proposed radiochemical method for the determination of plutonium isotopes in different environmental matrixes, twin aliquots of a set of samples were prepared with TEVA and with AG 1X8 resins and measured by AS. Some samples prepared with TEVA resins were measured as well by AMS. As it is shown in the text, there is a comfortable agreement between AS and AMS, which adequately validates the method.
△ Less
Submitted 23 January, 2025;
originally announced January 2025.
-
Isolation of $^{236}$U and $^{239,240}$Pu from seawater samples and its determination by Accelerator Mass Spectrometry
Authors:
Mercedes López-Lora,
Elena Chamizo,
María Villa-Alfageme,
Santiago Hurtado-Bermúdez,
Núria Casacuberta,
Manuel García-León
Abstract:
In this work we present and evaluate a radiochemical procedure optimised for the analysis of $^{236}$U and $^{239,240}$Pu in seawater samples by Accelerator Mass Spectrometry (AMS). The method is based on Fe(OH)$_3$ co-precipitation of actinides and uses TEVA and UTEVA extraction chromatography resins in a simplified way for the final U and Pu purification. In order to improve the performance of t…
▽ More
In this work we present and evaluate a radiochemical procedure optimised for the analysis of $^{236}$U and $^{239,240}$Pu in seawater samples by Accelerator Mass Spectrometry (AMS). The method is based on Fe(OH)$_3$ co-precipitation of actinides and uses TEVA and UTEVA extraction chromatography resins in a simplified way for the final U and Pu purification. In order to improve the performance of the method, the radiochemical yields are analysed in 1 to 10 L seawater volumes using alpha spectrometry (AS) and Inductively Coupled Plasma Mass Spectrometry (ICP-MS). Robust 80% plutonium recoveries are obtained; however, it is found that Fe(III) concentration in the precipitation solution and sample volume are the two critical and correlated parameters influencing the initial uranium extraction through Fe(OH)$_3$ co-precipitation. Therefore, we propose an expression that optimises the sample volume and Fe(III) amounts according to both the $^{236}$U and $^{239,240}$Pu concentrations in the samples and the performance parameters of the AMS facility. The method is validated for the current setup of the 1 MV AMS system (CNA, Sevilla, Spain), where He gas is used as a stripper, by analysing a set of intercomparison seawater samples, together with the Laboratory of Ion Beam Physics (ETH, Zürich, Switzerland).
△ Less
Submitted 17 January, 2025;
originally announced January 2025.
-
Multivariate statistical modelling of future marine storms
Authors:
Jue Lin-Ye,
Manuel García-León,
Vicente Gràcia,
Maribel Ortego,
Piero Lionello,
Agustín Sanchez-Arcilla
Abstract:
Extreme events, such as wave-storms, need to be characterized for coastal infrastructure design purposes. Such description should contain information on both the univariate behaviour and the joint-dependence of storm-variables. These two aspects have been here addressed through generalized Pareto distributions and hierarchical Archimedean copulas. A non-stationary model has been used to highlight…
▽ More
Extreme events, such as wave-storms, need to be characterized for coastal infrastructure design purposes. Such description should contain information on both the univariate behaviour and the joint-dependence of storm-variables. These two aspects have been here addressed through generalized Pareto distributions and hierarchical Archimedean copulas. A non-stationary model has been used to highlight the relationship between these extreme events and non-stationary climate. It has been applied to a Representative Concentration Pathway 8.5 Climate-Change scenario, for a fetch-limited environment (Catalan Coast). In the non-stationary model, all considered variables decrease in time, except for storm-duration at the northern part of the Catalan Coast. The joint distribution of storm variables presents cyclical fluctuations, with a stronger influence of climate dynamics than of climate itself.
△ Less
Submitted 13 March, 2019;
originally announced March 2019.
