-
Nuclear lattice model and the electronic configuration of the chemical elements
Authors:
Jozsef Garai
Abstract:
The fundamental organizing principle resulting in the periodic table is the nuclear charge. Arranging the chemical elements in an increasing atomic number order, a symmetry pattern known as the Periodic Table is detectable. The correlation between nuclear charge and the Periodic System of the Chemical Elements (PSCE) indicates that the symmetry emerges from the nucleus. Nuclear symmetry can only e…
▽ More
The fundamental organizing principle resulting in the periodic table is the nuclear charge. Arranging the chemical elements in an increasing atomic number order, a symmetry pattern known as the Periodic Table is detectable. The correlation between nuclear charge and the Periodic System of the Chemical Elements (PSCE) indicates that the symmetry emerges from the nucleus. Nuclear symmetry can only exist if the relative positions of the nucleons in the nucleus are invariant. Pauli exclusion principle can also be interpreted as the nucleons should occupy a lattice position. Based on symmetry and other indicatives face centered cubic arrangement have been proposed for the nuclear lattice. A lattice model, representing the protons and the neutrons by equal spheres and arranging them alternately in a face centered cubic structure forming a double tetrahedron, is able to reproduce all of the properties of the nucleus including the quantum numbers and the periodicity of the elements. Based on the geometry of the nuclear structure it is shown that when a new 'layer' of the nuclear structure starts then the distance between the first proton in the new layer and the charge center of the nucleus is smaller than the distance of the proton, which completed the preceding 'layer'. Thus a new valence electron shell should start to develop when the nuclear structure is expanded. The expansion of the double tetrahedron FCC nuclear lattice model offers a feasible physical explanation how the nucleus affects the electronic configuration of the chemical elements depicted by the periodic table.
△ Less
Submitted 7 July, 2015; v1 submitted 24 January, 2011;
originally announced January 2011.
-
Ionized Nitrogen Mono-hydride Bands are Identified in the Pre-solar and Carbonado Diamond Spectra
Authors:
Jozsef Garai
Abstract:
None of the well established Nitrogen related IR absorption bands, common in synthetic and terrestrial diamonds, have been identified in the pre-solar diamond spectra. In the carbonado diamond spectra only the single nitrogen impurity (C centre) is identified and the assignments of the rest of the nitrogen-related bands are still debated. It is speculated that the unidentified bands in the Nitroge…
▽ More
None of the well established Nitrogen related IR absorption bands, common in synthetic and terrestrial diamonds, have been identified in the pre-solar diamond spectra. In the carbonado diamond spectra only the single nitrogen impurity (C centre) is identified and the assignments of the rest of the nitrogen-related bands are still debated. It is speculated that the unidentified bands in the Nitrogen absorption region are not induced by Nitrogen but rather by Nitrogen-hydrides because in the interstellar environment Nitrogen reacts with Hydrogen and forms NH+; NH; NH2; NH3. Among these Hydrides the electronic configuration of NH+ is the closest to Carbon. Thus this ionized Nitrogen-mono-hydride is the best candidate to substitute Carbon in the diamond structure. The bands of the substitutional NH+ defect are deduced by red shifting the irradiation induced N+ bands due to the mass of the additional Hydrogen. The six bands of the NH+ defects are identified in both the pre-solar and the carbonado diamond spectra. The new assignments identify all of the nitrogen-related bands in the spectra, indicating that pre-solar and carbonado diamonds contain only single nitrogen impurities.
△ Less
Submitted 26 July, 2011; v1 submitted 13 May, 2010;
originally announced May 2010.
-
Calculating the optimum pressure and temperature for vacancy minimization from theory; Niobium is an example
Authors:
Jozsef Garai
Abstract:
Self-resonance in the atomic vibration occurs when the average wavelength of the phonon thermal vibration is equivalent or harmonic of the diameters of the atoms. It is suggested that applying pressure at temperature corresponding to the self-resonance should effectively reduce the number of vacancies. This theoretical prediction is tested on Niobium by measuring the magnetic susceptibility of t…
▽ More
Self-resonance in the atomic vibration occurs when the average wavelength of the phonon thermal vibration is equivalent or harmonic of the diameters of the atoms. It is suggested that applying pressure at temperature corresponding to the self-resonance should effectively reduce the number of vacancies. This theoretical prediction is tested on Niobium by measuring the magnetic susceptibility of the untreated and treated samples. The applied pressure-temperature treatment increased the critical temperature of Niobium by about 30 percent which was also accompanied with volume increase.
△ Less
Submitted 13 November, 2009;
originally announced November 2009.
-
Impact Generated Shockwaves are Proposed for the Origin of Sunspots to Explain the Detected Planetary Effects on the Solar Activity
Authors:
Jozsef Garai
Abstract:
Five new correlations between sunspot activity and orbiting position of the Jovian planets are detected. In order to explain these correlations it is suggested that the resonance of the outer planets destabilizes the orbit of Kuiper Belt Objects and generates a cyclical impact frequency on the Sun. The vaporization of the object initiates a shock way disrupting the upwelling of the plasma result…
▽ More
Five new correlations between sunspot activity and orbiting position of the Jovian planets are detected. In order to explain these correlations it is suggested that the resonance of the outer planets destabilizes the orbit of Kuiper Belt Objects and generates a cyclical impact frequency on the Sun. The vaporization of the object initiates a shock way disrupting the upwelling of the plasma resulting in a sunspot formation. The proposed model is able to explain the length of the cycle, the latitude distribution of the sunspots and the extremely long term stability of the cycles. Calculating the positions of the Jovian planets at conjunction and opposition allows the long term prediction of the solar activity.
△ Less
Submitted 23 June, 2009;
originally announced June 2009.
-
Pressure effect on the melting temperature
Authors:
Jozsef Garai,
Jiuhua Chen
Abstract:
Pressure-melting temperature relationship is proposed and tested against the experiments of metals (Pt and Al), salt (NaCl), and ceramic (MgO) with positive results. The equation contains one open parameter which remains constant for the investigated substances. The constant value of the parameter indicates that the presented equation for the melting curve might be the first one which does not c…
▽ More
Pressure-melting temperature relationship is proposed and tested against the experiments of metals (Pt and Al), salt (NaCl), and ceramic (MgO) with positive results. The equation contains one open parameter which remains constant for the investigated substances. The constant value of the parameter indicates that the presented equation for the melting curve might be the first one which does not contain any arbitrary constant which is left open to fit to the experiments.
△ Less
Submitted 17 June, 2009;
originally announced June 2009.
-
The melting curve of Sodium: a theoretical approach
Authors:
Jozsef Garai
Abstract:
New model describing the pressure effect on the melting temperature is proposed by using four assumptions. One, the average wavelength of the phonon vibration at the Debye temperature corresponds to the length of the unit cell. Two, the phonon vibration at the melting temperature is in self-resonance with the lattice vibration of the surface atomic/molecular layer. Three, the phonon wavelength r…
▽ More
New model describing the pressure effect on the melting temperature is proposed by using four assumptions. One, the average wavelength of the phonon vibration at the Debye temperature corresponds to the length of the unit cell. Two, the phonon vibration at the melting temperature is in self-resonance with the lattice vibration of the surface atomic/molecular layer. Three, the phonon wavelength ratio of the Debye and the melting temperature does not be affected by the pressure. Four the pressure reduces the anharmonic part of the vibration. The relevant equations are derived and tested against the experiments of sodium with positive result.
△ Less
Submitted 7 May, 2009;
originally announced May 2009.
-
P-V-T Equation of State for Periclase
Authors:
Jozsef Garai,
Jiuhua Chen,
Gabor Telekes
Abstract:
Collecting the complete data set of previous experiments on periclase, covering a pressure and temperature range of 0-141.8 GPa and 100-3031 K respectively, the first comprehensive P-V-T description of MgO is presented comprising all previous experiments. The P-V-T EoS of Birch-Murnaghan, Rydberg-Vinet and Garai are determined by unrestricted fitting. The three EoSs are consistent and a unique s…
▽ More
Collecting the complete data set of previous experiments on periclase, covering a pressure and temperature range of 0-141.8 GPa and 100-3031 K respectively, the first comprehensive P-V-T description of MgO is presented comprising all previous experiments. The P-V-T EoS of Birch-Murnaghan, Rydberg-Vinet and Garai are determined by unrestricted fitting. The three EoSs are consistent and a unique set of parameters is able to cover the entire pressure and temperature range. The RMS misfits for the pressure are 0.371 GPa, 0.381 GPa and 0.396 GPa for the Garai, Birch-Murnaghan and Rydberg-Vinet EoSs. The RMS misfits for the volume and the temperature are 0.018 cm3 and 60.3 K for the EoS of Garai.
△ Less
Submitted 5 October, 2009; v1 submitted 2 May, 2008;
originally announced May 2008.
-
Universal Equation of States are Derived from the Isothermal Relationships of Elastic Solids
Authors:
Jozsef Garai
Abstract:
Universal P-V-T equations of states are derived from the original isothermal expressions of Birch-Murnaghan and the Vinet EoSs by using absolute reference frame and incorporating the temperature dependence of the parameters. The equations are tested against the experiments of perovskite [MgSiO3] and periclase [MgO]. The determined parameters of the EoSs are valid throughout the entire pressure a…
▽ More
Universal P-V-T equations of states are derived from the original isothermal expressions of Birch-Murnaghan and the Vinet EoSs by using absolute reference frame and incorporating the temperature dependence of the parameters. The equations are tested against the experiments of perovskite [MgSiO3] and periclase [MgO]. The determined parameters of the EoSs are valid throughout the entire pressure and temperature ranges, which cover 0-142 GPa and 293-3000 K and 0-109 GPa and 293-2199 K for periclase and perovskite respectively. The root-mean-square (RMS) misfits of the universal Birch-Murnaghan EoS are 0.73 and 0.33 GPa and the misfit of the Vinet EoS are 0.74 and 0.32 GPa for perovskite and periclase respectively.
△ Less
Submitted 2 May, 2008; v1 submitted 17 April, 2008;
originally announced April 2008.
-
Global coupling at 660 km is proposed to explain plate tectonics and the generation of the earth's magnetic field
Authors:
Jozsef Garai
Abstract:
The presence of low viscosity layers in the mantle is supported by line of geological and geophysical observations. Recent high pressure and temperature investigations indicated that partial carbonate melt should exist at the bottom of the lithosphere and at 660 km. The presence of few percent carbonate melt reduces the viscosity by several order of magnitude. The globally existing 660 km very l…
▽ More
The presence of low viscosity layers in the mantle is supported by line of geological and geophysical observations. Recent high pressure and temperature investigations indicated that partial carbonate melt should exist at the bottom of the lithosphere and at 660 km. The presence of few percent carbonate melt reduces the viscosity by several order of magnitude. The globally existing 660 km very low viscosity layer allows the development of differential rotation between the upper and lower mantle. This differential rotation between the 660 km outer shell and the rest of the earth offers a plausible explanation for plate tectonics and for the generation of the earth's magnetic field. Simple dynamo model is proposed, which able to reproduce all of the features of the contemporary and, within reasonable uncertainty, the paleomagnetic field. The model is also consistent with geological and geophysical observations.
△ Less
Submitted 9 September, 2007;
originally announced September 2007.
-
P-V-T equation of state of epsilon iron and its densities at core conditions
Authors:
Jozsef Garai
Abstract:
The author's new p-V-T Equation of State is tested against the available experiments of epsilon iron. The root-mean-square-deviations (RMSD) of the molar volume, pressure, and temperature are 0.021 cm3, 2.0 GPa and 144.9 K respectively. Separating the experiments into 200 K ranges the new EoS was compared to the most widely used finite strain, interatomic potential, and empirical isothermal EoSs…
▽ More
The author's new p-V-T Equation of State is tested against the available experiments of epsilon iron. The root-mean-square-deviations (RMSD) of the molar volume, pressure, and temperature are 0.021 cm3, 2.0 GPa and 144.9 K respectively. Separating the experiments into 200 K ranges the new EoS was compared to the most widely used finite strain, interatomic potential, and empirical isothermal EoSs such as the Burch-Murnaghan, the Vinet, and the Roy-Roy respectively. Correlation coefficients, RMSDs of the residuals and Akaike Information Criteria were used for evaluating the fittings. Based on these fitting parameters the new p-V-T EoS is equal or better than the conventional isothermal EoSs. The newly defined parameters were used to calculate the density of the inner core. The calculated densities are significantly lower than the current consensus indicating that it might be too early excluding the possibility of a pure iron-nickel core with no light elements.
△ Less
Submitted 26 July, 2007;
originally announced July 2007.
-
Semi-empirical pressure-volume-temperature equation of state; MgSiO3 perovskite is an example
Authors:
Jozsef Garai
Abstract:
Simple general formula describing the p-V-T relationships of elastic solids is derived from theoretical considerations. The new EoS was tested to experiments of perovskite 0-109 GPa and 293-2000 K. The parameters providing the best fit are: Ko = 267.5 GPa, Vo = 24.284 cm3, alpha_o = 2.079x10^-5 K^-1, the pressure derivative of Ko is 1.556 and the pressure derivative of alpha_o is -1.098x10^-7 K^…
▽ More
Simple general formula describing the p-V-T relationships of elastic solids is derived from theoretical considerations. The new EoS was tested to experiments of perovskite 0-109 GPa and 293-2000 K. The parameters providing the best fit are: Ko = 267.5 GPa, Vo = 24.284 cm3, alpha_o = 2.079x10^-5 K^-1, the pressure derivative of Ko is 1.556 and the pressure derivative of alpha_o is -1.098x10^-7 K^-1GPa^-1 . The root-mean-square-deviations (RMSD) of the residuals are 0.043 cm3, 0.79 GPa, and 125 K for the molar volume, pressure, and temperature respectively. These RMSD values are in the range of the uncertainty of the experiments, indicating that the five parameters semi-empirical EoS correctly describes the p-V-T relationships of perovskite. Separating the experiments into 200 K ranges the semi-empirical EoS was compared to the most widely used finite strain, interatomic potential, and empirical isothermal EoSs such as the Birch-Murnaghan, the Vinet, and the Roy-Roy respectively. Correlation coefficients, RMSDs of the residuals and Akaike Information Criteria were used for evaluating the fitting. Based on these fitting parameters under pure isothermal conditions the semi-empirical p-V EoS is slightly weaker than the Birch-Murnaghan and Vinet EoSs; however, the semi-empirical p-V-T EoS is superior in every temperature range to all of the investigated conventional isothermal EoSs.
△ Less
Submitted 10 November, 2007; v1 submitted 2 June, 2007;
originally announced June 2007.
-
The First Law of Thermodynamics and the Thermodynamic Description of Elastic Solids
Authors:
Jozsef Garai
Abstract:
Historically, the thermodynamic behavior of gasses was described first and the derived equations were adapted to solids. It is suggested that the current thermodynamic description of solid phase is still incomplete because the isothermal work done on or by the system is not counted in the internal energy. It is also suggested that the isobaric work should not be deducted from the internal energy…
▽ More
Historically, the thermodynamic behavior of gasses was described first and the derived equations were adapted to solids. It is suggested that the current thermodynamic description of solid phase is still incomplete because the isothermal work done on or by the system is not counted in the internal energy. It is also suggested that the isobaric work should not be deducted from the internal energy because the system does not do work when it expands. Further more it is suggested that Joule postulate regarding the mechanical equivalency of heat -the first law of thermodynamics- is not universal and not applicable to elastic solids. The equations for the proposed thermodynamic description of solids are derived and tested by calculating the internal energies of the system using the equation of state of MgO. The agreement with theory is good.
△ Less
Submitted 24 February, 2010; v1 submitted 10 May, 2007;
originally announced May 2007.
-
Analytical Solution Describing the Periodicity of the Elements in the Periodic System
Authors:
Jozsef Garai
Abstract:
Mathematical formula describing the periodicity of the elements in the periodic system is presented.
Mathematical formula describing the periodicity of the elements in the periodic system is presented.
△ Less
Submitted 26 March, 2007;
originally announced March 2007.
-
Physics behind the Debye temperature
Authors:
Jozsef Garai
Abstract:
Textbooks introduce the Debye temperature to simplify the integration of the heat capacity. This approach gives the impression that the Debye temperature is a parameter which makes the integration more convenient. The Debye frequency cut occurs when the wavelength of the phonon frequency reaches the size of the smallest unit of the lattice which is the length of the unit cell. At frequencies hig…
▽ More
Textbooks introduce the Debye temperature to simplify the integration of the heat capacity. This approach gives the impression that the Debye temperature is a parameter which makes the integration more convenient. The Debye frequency cut occurs when the wavelength of the phonon frequency reaches the size of the smallest unit of the lattice which is the length of the unit cell. At frequencies higher than the cut off frequency the 'lattice' unable to 'see' the vibration because the wavelength of the vibration is smaller than the basic unit of the atomic arrangement; therefore, the vibration becomes independent from the lattice. The Debye cut off frequency or temperature separates the collective thermal lattice vibration from the independent thermal lattice vibration. The experimental data of highest packing monoatomic arrangements is used to calculate the wavelength of the Debye cut off frequency. The calculated values agree well with the unit cell parameters.
△ Less
Submitted 29 January, 2009; v1 submitted 28 February, 2007;
originally announced March 2007.
-
Physical model for vaporization
Authors:
Jozsef Garai
Abstract:
Based on two assumptions, the surface layer is flexible, and the internal energy of the latent heat of vaporization is completely utilized by the atoms for overcoming on the surface resistance of the liquid, the enthalpy of vaporization was calculated for 45 elements. The theoretical values were tested against experiments with positive result.
Based on two assumptions, the surface layer is flexible, and the internal energy of the latent heat of vaporization is completely utilized by the atoms for overcoming on the surface resistance of the liquid, the enthalpy of vaporization was calculated for 45 elements. The theoretical values were tested against experiments with positive result.
△ Less
Submitted 30 July, 2009; v1 submitted 29 November, 2006;
originally announced November 2006.
-
Infrared Absorption Investigations Confirm the Extraterrestrial Origin of Carbonado-Diamonds
Authors:
Jozsef Garai,
Stephen E. Haggerty,
Sandeep Rekhi,
Mark Chance
Abstract:
The first complete infrared FTIR absorption spectra for carbonado-diamond confirm the interstellar origin for the most enigmatic diamonds known as carbonado. All previous attempts failed to measure the absorption of carbonado-diamond in the most important IR-range of 1000-1300 cm-1 (10.00-7.69 micro-m.) because of silica inclusions. In our investigation, KBr pellets were made from crushed silica…
▽ More
The first complete infrared FTIR absorption spectra for carbonado-diamond confirm the interstellar origin for the most enigmatic diamonds known as carbonado. All previous attempts failed to measure the absorption of carbonado-diamond in the most important IR-range of 1000-1300 cm-1 (10.00-7.69 micro-m.) because of silica inclusions. In our investigation, KBr pellets were made from crushed silica-free carbonado-diamond and thin sections were also prepared. The 100 to 1000 times brighter synchrotron infrared radiation permits a greater spatial resolution. Inclusions and pore spaces were avoided and/or sources of chemical contamination were removed. The FTIR spectra of carbonado-diamond mostly depict the presence of single nitrogen impurities, and hydrogen. The lack of identifiable nitrogen aggregates in the infrared spectra, the presence of features related to hydrocarbon stretch bonds, and the resemblance of the spectra to CVD and presolar diamonds indicate that carbonado-diamonds formed in a hydrogen-rich interstellar environment. This is consistent with carbonado-diamond being sintered and porous, with extremely reduced metals, metal alloys, carbides and nitrides, light carbon isotopes, surfaces with glassy melt-like patinas, deformation lamellae, and a complete absence of primary, terrestrial mineral inclusions. The 2.6-3.8 billion year old fragmented body was of asteroidal proportions.
△ Less
Submitted 27 October, 2006; v1 submitted 2 August, 2006;
originally announced August 2006.
-
Investigating the optical properties of carbonado-diamonds
Authors:
Jozsef Garai,
Stephen E. Haggerty,
Andriy Durygin
Abstract:
Carbonado-diamond is the most enigmatic of diamond types, and surprisingly there are few optical studies. In some cases, the diamond peak at 1332.5 cm-1 is absent, and the presence of a D-band graphite peak around 1320 cm-1 is observed in our Raman investigation. The disappearance of the diamond peak in carbonado-diamond is interpreted as the combined effect of small crystal size and the high ab…
▽ More
Carbonado-diamond is the most enigmatic of diamond types, and surprisingly there are few optical studies. In some cases, the diamond peak at 1332.5 cm-1 is absent, and the presence of a D-band graphite peak around 1320 cm-1 is observed in our Raman investigation. The disappearance of the diamond peak in carbonado-diamond is interpreted as the combined effect of small crystal size and the high absorption of graphite. The photoluminescence spectra of carbonado-diamond shows two new zero phonon lines at 584.2 nm (2.12 eV) and at 743 nm (1.67 eV). By heating the carbonado-diamond to 1500 oC for ten minutes in argon the appearance of an additional peak at 693.5 nm (1.786 eV) is detected. The infrared absorption spectra of carbonado-diamond powder indicate either extremely low or extremely high absorption.
△ Less
Submitted 18 January, 2006;
originally announced January 2006.
-
The temperature dependence of the isothermal bulk modulus at 1 bar pressure
Authors:
J. Garai,
A. Laugier
Abstract:
It is well established that the product of the volume coefficient of thermal expansion and the bulk modulus is nearly constant at temperatures higher than the Debye temperature. Using this approximation allows predicting the values of the bulk modulus. The derived analytical solution for the temperature dependence of the isothermal bulk modulus has been applied to ten substances. The good correl…
▽ More
It is well established that the product of the volume coefficient of thermal expansion and the bulk modulus is nearly constant at temperatures higher than the Debye temperature. Using this approximation allows predicting the values of the bulk modulus. The derived analytical solution for the temperature dependence of the isothermal bulk modulus has been applied to ten substances. The good correlations to the experiments indicate that the expression may be useful for substances for which bulk modulus data are lacking.
△ Less
Submitted 16 November, 2006; v1 submitted 14 January, 2006;
originally announced January 2006.
-
Heat capacities of elastic solids
Authors:
Jozsef Garai
Abstract:
The work function is embedded in the equation describing the relationship between the constant volume and constant pressure heat capacities. The modification of the work function results that the relationship between these quantities must be changed accordingly. Using the newly derived work functions of elastic solids the description of the heat capacities and the relationship between the heat c…
▽ More
The work function is embedded in the equation describing the relationship between the constant volume and constant pressure heat capacities. The modification of the work function results that the relationship between these quantities must be changed accordingly. Using the newly derived work functions of elastic solids the description of the heat capacities and the relationship between the heat capacities are given for solid phase.
△ Less
Submitted 7 November, 2005;
originally announced November 2005.
-
Inconsistencies in the current thermodynamic description of elastic solids
Authors:
Jozsef Garai,
Alexandre Laugier
Abstract:
Using the contemporary thermodynamic equations of elastic solids leads to contradictions with the fundamental statements of thermodynamics. Two examples are presented to expose the inconsistencies. In example one the internal energy between the initial and final states shows path dependency while in example two changing the temperature of a system at constant volume produces mechanical work. The…
▽ More
Using the contemporary thermodynamic equations of elastic solids leads to contradictions with the fundamental statements of thermodynamics. Two examples are presented to expose the inconsistencies. In example one the internal energy between the initial and final states shows path dependency while in example two changing the temperature of a system at constant volume produces mechanical work. These results are contradictory with the fundamentals of thermodynamics and indicate that the contemporary description of elastic solids needs to be revisited and revised.
△ Less
Submitted 16 August, 2005;
originally announced August 2005.
-
Thermo-physical description of elastic solids
Authors:
Jozsef Garai
Abstract:
Experiments show that all the derivatives of the thermo-physical variables are nearly constant. The constant value of the derivatives indicates linear relationship between the variables. Neither the volume coefficient of thermal expansion nor the bulk modulus are constant and show pressure and temperature dependence. Besides the derivatives the only other quantity in the definition of the volume…
▽ More
Experiments show that all the derivatives of the thermo-physical variables are nearly constant. The constant value of the derivatives indicates linear relationship between the variables. Neither the volume coefficient of thermal expansion nor the bulk modulus are constant and show pressure and temperature dependence. Besides the derivatives the only other quantity in the definition of the volume coefficient of thermal expansion and the bulk modulus is the volume. It is suggested that the pressure and temperature dependence of these parameters is resulted from the improper identification of the volume. In solid phase the actual volume is not an independent variable but rather comprises from three more fundamental volume components, initial, thermal, and elastic volumes. The pressure correlates to the elastic volume and the temperature to the thermal volume. New definitions for the volume coefficient of thermal expansion and the bulk modulus are proposed by identifying the fundamental volume parts specifically. The complete separation of the thermal and elastic volumes is consistent with theory since the vibrational and static energies are completely independent of each other. Based on the independence of the thermal and elastic deformations it is suggested that thermo elastic coupling should not exist in solid phase in the elastic domain with the exception of constant volume. It is also suggested that the thermo-elastic coupling is irreversible and exist only in the temperature-pressure direction.
△ Less
Submitted 28 July, 2006; v1 submitted 11 July, 2005;
originally announced July 2005.
-
The work function of elastic solids
Authors:
Jozsef Garai,
Alexandre Laugier
Abstract:
In solid phase the pressure correlates to the elastic related volume change while the temperature to the thermal related volume change. These volume changes are not compatible with the exception of constant volume condition when the expanded volume converts completely compressed volume. Separating the thermal and elastic related volume changes the work functions for each of the thermodynamic con…
▽ More
In solid phase the pressure correlates to the elastic related volume change while the temperature to the thermal related volume change. These volume changes are not compatible with the exception of constant volume condition when the expanded volume converts completely compressed volume. Separating the thermal and elastic related volume changes the work functions for each of the thermodynamic conditions are derived. Based on theoretical consideration it is suggested that the thermal related volume change do not result mechanical work. Homogeneous model, both the system and the surrounding have the same phase, can completely explain the lack of the thermal related work and provide a self-consistent thermodynamic description for the elastic solids.
△ Less
Submitted 2 November, 2005; v1 submitted 27 April, 2005;
originally announced April 2005.
-
Physical model for the latent heat of fusion
Authors:
Jozsef Garai
Abstract:
The atomic movement induced on melting has to overcome a viscous drag resistance. It is suggested that the latent heat of fusion supplies the required energy for this physical process. The viscosity model introduced here allows computation of the latent heat from viscosity, molar volume, melting temperature, and atomic mass and diameter. The correlation between these parameters and the latent he…
▽ More
The atomic movement induced on melting has to overcome a viscous drag resistance. It is suggested that the latent heat of fusion supplies the required energy for this physical process. The viscosity model introduced here allows computation of the latent heat from viscosity, molar volume, melting temperature, and atomic mass and diameter. The correlation between these parameters and the latent heat of 14 elements with body and face centered cubic structures was exceptional, with the correlation coefficients of 0.97 and 0.95 respectively.
△ Less
Submitted 6 November, 2004; v1 submitted 15 July, 2004;
originally announced July 2004.
-
Correlation between thermal expansion and heat capacity
Authors:
Jozsef Garai
Abstract:
Theoretically predicted linear correlation between the volume coefficient of thermal expansion and the thermal heat capacity was investigated for highly symmetrical atomic arrangements. Normalizing the data of these thermodynamic parameters to the Debye temperature gives practically identical curves from zero Kelvin to the Debye temperature. This result is consistent with the predicted linear co…
▽ More
Theoretically predicted linear correlation between the volume coefficient of thermal expansion and the thermal heat capacity was investigated for highly symmetrical atomic arrangements. Normalizing the data of these thermodynamic parameters to the Debye temperature gives practically identical curves from zero Kelvin to the Debye temperature. This result is consistent with the predicted linear correlation. At temperatures higher than the Debye temperature the normalized values of the thermal expansion are always higher than the normalized value of the heat capacity. The detected correlation has significant computational advantage since it allows calculating the volume coefficient of thermal expansion from one experimental data by using the Debye function.
△ Less
Submitted 28 July, 2006; v1 submitted 25 April, 2004;
originally announced April 2004.
-
Bernoulli process with 282 ky periodicity is detected in the R-N reversals of the earth's magnetic field
Authors:
Jozsef Garai
Abstract:
Investigating the polarity time scales for the last 118 My a Bernoulli process with p=0.5 overriding with a Gaussian noise have been detected for the R-N magnetic reversals. The Bernoulli trials are separated by 282 ky. The frequency of the Bernoulli process correlates to planetary cycles and consistent with an impact triggered global cooling mechanism. The detected pattern allows calculating th…
▽ More
Investigating the polarity time scales for the last 118 My a Bernoulli process with p=0.5 overriding with a Gaussian noise have been detected for the R-N magnetic reversals. The Bernoulli trials are separated by 282 ky. The frequency of the Bernoulli process correlates to planetary cycles and consistent with an impact triggered global cooling mechanism. The detected pattern allows calculating the probability of an upcoming R-N reversal between any time intervals.
△ Less
Submitted 31 January, 2004;
originally announced February 2004.
-
Post glacial rebounds measure the viscosity of the lithosphere
Authors:
Jozsef Garai
Abstract:
The observed higher uplift rates before the end of deglaciation requires the existence of a low viscosity channel or layer. The uplifts observed after the end of deglaciation does not show any contribution from this low viscosity channel and a homogeneous viscosity model fits very well to the observed uplift. Most of the researchers therefore prefer the homogeneous model and suggest that the hig…
▽ More
The observed higher uplift rates before the end of deglaciation requires the existence of a low viscosity channel or layer. The uplifts observed after the end of deglaciation does not show any contribution from this low viscosity channel and a homogeneous viscosity model fits very well to the observed uplift. Most of the researchers therefore prefer the homogeneous model and suggest that the higher uplift rate before the end of deglaciation is the result of elastic contamination. It has been shown that the elastic deformation of the lithosphere is far too small to be responsible for the observed extra uplift; therefore, the homogeneous viscosity model should be discredited.
The homogeneous viscosity of the postglacial period and the high uplift rate of the late glacial period can be explained with a model which has an upper layer determining the homogeneous viscosity and the layer below it which has a low viscosity. The contribution to the uplift of this low viscosity layer is indistinguishable from an instantaneous uplift.
Current GPS deformation measurements indicating 10^21 Pas average viscosity for the lithosphere, which is consistent with this model. The viscosity of the low velocity zone should be between 10^18 Pas and 10^11 Pas. The lower constrain on the viscosity of the low velocity zone can be deduced from seismic observations. This viscosity model is consistent with post glacial rebounds and further supported by the lack of the dynamic topography.
△ Less
Submitted 31 July, 2003;
originally announced August 2003.
-
Melting of San Carlos olivine in the presence of carbon at 6-12 GPa
Authors:
Jozsef Garai,
Tibor Gasparik
Abstract:
Experiments at 6-12 GPa showed that San Carlos olivine surrounded by carbon melts incongruently at 1400 C and higher temperatures, producing olivine with lower Fe contents, pyroxene, carbide, and carbonate melt. The relatively low melting temperature of 1400 C, independent of pressure, is consistent with carbonate melting. The new evidence for the reduced stability of olivine at high temperature…
▽ More
Experiments at 6-12 GPa showed that San Carlos olivine surrounded by carbon melts incongruently at 1400 C and higher temperatures, producing olivine with lower Fe contents, pyroxene, carbide, and carbonate melt. The relatively low melting temperature of 1400 C, independent of pressure, is consistent with carbonate melting. The new evidence for the reduced stability of olivine at high temperatures in the presence of carbonate melts is consistent with geophysical observations, and results in a substantially improved agreement between the experimentally determined phase relations and the observed seismic velocity structure of the upper mantle.
△ Less
Submitted 25 July, 2003;
originally announced July 2003.
-
Entropy is a Mathematical Formula
Authors:
Jozsef Garai
Abstract:
The microscopic explanation of entropy has been challenged from both experimental and theoretical point of view. The expression of entropy is derived from the first law of thermodynamics indicating that entropy or the second law of thermodynamics is not an independent law.
The microscopic explanation of entropy has been challenged from both experimental and theoretical point of view. The expression of entropy is derived from the first law of thermodynamics indicating that entropy or the second law of thermodynamics is not an independent law.
△ Less
Submitted 9 July, 2004; v1 submitted 20 January, 2003;
originally announced January 2003.
