-
Cone-jet Stokes solutions in strong viscous flows: the vanishing flow rate limit
Authors:
Alfonso M. Ganan-Calvo,
Miguel A. Herrada,
Jens Eggers
Abstract:
Steady tip streaming in the vanishing flow rate limit has been evidenced both experimentally and numerically in the literature. However, local conical Stokes flow solutions supporting these results at vanishing small scales around the emitting tip have remained elusive. This work presents approximate local conical solutions in liquid-liquid flow focusing and tip streaming, in general, as the limit…
▽ More
Steady tip streaming in the vanishing flow rate limit has been evidenced both experimentally and numerically in the literature. However, local conical Stokes flow solutions supporting these results at vanishing small scales around the emitting tip have remained elusive. This work presents approximate local conical solutions in liquid-liquid flow focusing and tip streaming, in general, as the limit of a macroscopic vanishing issued flow rate. This provides mathematical foundations for the existence of an asymptotically vanishing scale at the tip of an intermediate conical flow geometry with angle $α$. For a sufficiently small inner-to-outer liquid viscosity ratio $λ$, these solutions exhibit a universal power-law relationship between this ratio and the cone angle as $α=k λ^{1/2}$, where the prefactor $k$, of the order of unity, depends on the geometric details of the macroscopic flow. This confirms the existing proposals that anticipate the use of flow focusing and tip streaming technologies for tight control of microscopic scales, down to those where diffuse liquid-liquid interfaces become manifested.
△ Less
Submitted 30 May, 2025;
originally announced May 2025.
-
Superstability of micrometer jets surrounded by a polymeric shell
Authors:
A. Rubio,
J. M. Montanero,
M. Vakili,
F. H. M. Koua,
S. Bajt,
H. N. Chapman,
A. M. Gañán-Calvo
Abstract:
We have produced superstable compound liquid microjets with a three-dimensional printed coaxial flow-focusing injector. The aqueous jet core is surrounded by a shell, a few hundred nanometers in thickness, of a low-concentration aqueous solution of a low-molecular-weight polymer. Due to the stabilizing effect of the polymeric shell, the minimum liquid flow rate leading to stable flow-focusing is d…
▽ More
We have produced superstable compound liquid microjets with a three-dimensional printed coaxial flow-focusing injector. The aqueous jet core is surrounded by a shell, a few hundred nanometers in thickness, of a low-concentration aqueous solution of a low-molecular-weight polymer. Due to the stabilizing effect of the polymeric shell, the minimum liquid flow rate leading to stable flow-focusing is decreased by one order of magnitude, resulting in much thinner and longer jets. Possible applications of this technique for Serial Femtosecond X-ray Crystallography are discussed.
△ Less
Submitted 27 May, 2025;
originally announced May 2025.
-
A new emitter for electrospray and electrohydrodynamic jet printing
Authors:
D. Fernández-Martínez,
E. J. Vega,
A. M. Gañán-Calvo,
J. M. Montanero
Abstract:
We propose using a dielectric beveled nozzle for electrospray and electrohydrodynamic jet printing. This nozzle stabilizes the liquid ejection of low-conductivity liquids, considerably reducing the minimum flow rate below which the flow becomes unstable. This translates into a significant reduction of the minimum jet diameter. Due to its dielectric character, electrochemical reactions occurring in…
▽ More
We propose using a dielectric beveled nozzle for electrospray and electrohydrodynamic jet printing. This nozzle stabilizes the liquid ejection of low-conductivity liquids, considerably reducing the minimum flow rate below which the flow becomes unstable. This translates into a significant reduction of the minimum jet diameter. Due to its dielectric character, electrochemical reactions occurring in metallic beveled nozzles (e.g. hypodermic needles) do not occur, preserving the purity of the liquid. This property makes this nozzle appropriate for Electrospray Ionization Mass Spectrometry (ESI-MS) or bioplotting. We illustrate the capabilities of this new technique by conducting (i) electrospray experiments with Newtonian liquids and (ii) electrohydrodynamic jet printing experiments with viscoelastic fluids. Jets with diameters around 1 $μ$m are produced with low-conductivity liquids such as octanol and glycerine. Viscoelastic threads a few microns in diameter are gently deposited on a moving substrate to print out uniform lines tens of nanometers in height. Due to the strong stabilizing effect of the beveled nozzle, the minimum flow rate and jet diameter were much smaller than the respective values obtained with the cylindrical capillary in the electrospray and electrohydrodynamic jet printing experiments. The proposed technique opens new routes for electrospray and electrohydrodynamic jet printing.
△ Less
Submitted 19 March, 2025;
originally announced March 2025.
-
The role of charge relaxation in electrified tip streaming
Authors:
M. Rubio,
P. Rodríguez-Díaz,
J. M. López-Herrera,
M. A. Herrada,
A. M. Gañán-Calvo,
J. M. Montanero
Abstract:
We study experimentally and numerically the onset of tip streaming in an electrified droplet. The experiments show that, for a sufficiently small dimensionless conductivity, the droplet apex oscillates before ejecting a liquid jet. This effect is caused by the limited charge transfer from the bulk to the interface. This reduces the electrostatic pressure at the droplet's stretching tip, preventing…
▽ More
We study experimentally and numerically the onset of tip streaming in an electrified droplet. The experiments show that, for a sufficiently small dimensionless conductivity, the droplet apex oscillates before ejecting a liquid jet. This effect is caused by the limited charge transfer from the bulk to the interface. This reduces the electrostatic pressure at the droplet's stretching tip, preventing liquid ejection. This reduction of electrostatic pressure is compensated for by the electric shear stress arising during the apex oscillations, which eventually leads to the jet formation. The stability limit calculated from the global stability analysis perfectly agrees with the experimental results. However, this analysis predicts non-oscillatory, non-localized instability in all the cases, suggesting that both the oscillatory behavior and the small local scale characterizing tip streaming arise during the nonlinear droplet deformation.
△ Less
Submitted 12 December, 2022;
originally announced December 2022.
-
A revision on Rayleigh capillary jet breakup
Authors:
Alfonso M. Ganan-Calvo
Abstract:
The average Rayleigh capillary breakup length of a cylindrical Newtonian viscous liquid jet moving with homogeneous velocity $\hat{U}$ (negligible external forces) must be determined by the selection of normal modes with time-independent amplitude and wavelength (invariant modes, IMs). Both positive and negative group velocity IMs exist in ample ranges of the parameter domain (Weber and Ohnesorge…
▽ More
The average Rayleigh capillary breakup length of a cylindrical Newtonian viscous liquid jet moving with homogeneous velocity $\hat{U}$ (negligible external forces) must be determined by the selection of normal modes with time-independent amplitude and wavelength (invariant modes, IMs). Both positive and negative group velocity IMs exist in ample ranges of the parameter domain (Weber and Ohnesorge numbers), which explains (i) the average breakup length independence on ambient conditions (long-term resonance), and (ii) its proportionality to the inverse of the spatial growth rate of the dominant positive group velocity IM. Published experimental results since Grace (1965, PhD Thesis) confirm our proposal.
△ Less
Submitted 6 November, 2022; v1 submitted 24 October, 2022;
originally announced October 2022.
-
The ocean fine spray
Authors:
Alfonso M. Ganan-Calvo
Abstract:
A major fraction of the atmospheric aerosols come from the ocean spray originated by the bursting of bubbles from breaking waves. A theoretical framework that incorporates the latest knowledge on film and jet droplets from bubble bursting is proposed. Assuming that their relics constitute the ultimate origin of primary and secondary sea aerosols through a diversity of physicochemical routes, the m…
▽ More
A major fraction of the atmospheric aerosols come from the ocean spray originated by the bursting of bubbles from breaking waves. A theoretical framework that incorporates the latest knowledge on film and jet droplets from bubble bursting is proposed. Assuming that their relics constitute the ultimate origin of primary and secondary sea aerosols through a diversity of physicochemical routes, the model can be reduced to a single controlling parameter to predict the global probability density distribution (pdf) of the ocean spray. The bursting and collapse of small bubbles on the sea surface from about 10 to 100 microns produces an extreme energy focusing and the ejection of a rapid liquid spout whose size reaches the free molecular regime of the gaseous environment. In these rarefied conditions, simulations show that this spout yields a jet of sub-micrometer and nanometric scale droplets whose number and speed can be far beyond any previous estimation, overcoming by orders of magnitude alternative mechanisms recently proposed. The one-parameter model fits remarkably well published experimental measurements along five orders of magnitude of spray size, from about 5 nm to about 0.5 mm. According to this proposal, the majority of aerosols determining the life on our planet would have their extremely elusive birth in the uterus-like nano-shape of small bursting bubbles on the ocean surface at the very latest instants of collapse.
△ Less
Submitted 16 April, 2022; v1 submitted 2 February, 2022;
originally announced February 2022.
-
Effect of an axial electric field on the breakup of a leaky-dielectric liquid filament
Authors:
M. Rubio,
A. Ponce-Torres,
M. A. Herrada,
A. M. Gañán-Calvo,
J. M. Montanero
Abstract:
We study experimentally and numerically the thinning of a Newtonian leaky-dielectric filament subject to an axial electric field. We consider moderately viscous liquids with high permittivity. The experiments show that satellite droplets are produced from the breakup of the filaments with high electrical permittivity due to the action of the electric field. Two electrified filaments with the same…
▽ More
We study experimentally and numerically the thinning of a Newtonian leaky-dielectric filament subject to an axial electric field. We consider moderately viscous liquids with high permittivity. The experiments show that satellite droplets are produced from the breakup of the filaments with high electrical permittivity due to the action of the electric field. Two electrified filaments with the same minimum radius thin at the same speed regardless of when the voltage was applied. The numerical simulations show that the polarization stress is responsible for the pinching delay observed in the experiments. Asymptotically close to the pinching point, the filament pinching is dominated by the diverging hydrodynamic forces. The polarization stress becomes subdominant even if this stress also diverges at this finite-time singularity.
△ Less
Submitted 23 July, 2021;
originally announced July 2021.
-
The fractal time growth of COVID-19 pandemic: an accurate self-similar model, and urgent conclusions
Authors:
Alfonso M. Ganan-Calvo,
Juan A. Hernandez Ramos
Abstract:
Current available data of the worldwide impact of the COVID-19 pandemic has been analyzed using dimensional analysis and self-similarity hypotheses. We show that the time series of infected population and deaths of the most impacted and unprepared countries exhibits an asymptotic power law behavior, compatible with the propagation of a signal in a fractal network. We propose a model which predicts…
▽ More
Current available data of the worldwide impact of the COVID-19 pandemic has been analyzed using dimensional analysis and self-similarity hypotheses. We show that the time series of infected population and deaths of the most impacted and unprepared countries exhibits an asymptotic power law behavior, compatible with the propagation of a signal in a fractal network. We propose a model which predicts an asymptotically self-similar expansion of deaths in time before containment, and the final death toll under total containment measures, as a function of the delay in taking those measures after the expansion is observed. The physics of the model resembles the expansion of a flame in a homogeneous domain with a fractal dimension 3.75. After containment measures are taken, the natural fractal structure of the network is drastically altered and a secondary evolution is observed. This evolution, akin to the homogeneous combustion in a static isolated enclosure with a final quenching, has a characteristic time of 20.1 days, according to available data of the pandemic behavior in China. The proposed model is remarkably consistent with available data, which supports the simplifying hypotheses made in the model. A universal formulation for a quarantine as a function of that delay is also proposed.
△ Less
Submitted 31 March, 2020;
originally announced March 2020.
-
On the physics of transient ejection from bubble bursting
Authors:
Alfonso M. Ganan-Calvo,
Jose M. Lopez-Herrera
Abstract:
The transient ejection due to a bubble bursting at the interface of a liquid with a gas environment is here described using a dynamical scaling analysis along the process. We show here that the ejection of a liquid microjet requires the backfire of a vortex ring inside the liquid to preserve physical symmetry, which involves a non-trivial scaling. We present the first single uniformly valid expres…
▽ More
The transient ejection due to a bubble bursting at the interface of a liquid with a gas environment is here described using a dynamical scaling analysis along the process. We show here that the ejection of a liquid microjet requires the backfire of a vortex ring inside the liquid to preserve physical symmetry, which involves a non-trivial scaling. We present the first single uniformly valid expression for the size and speed of ejected droplets for the whole range of the Ohnesorge and Bond numbers where droplet ejection occurs. The evolution of the flow variables, the apparent singularity for a critical Ohnesorge number, and the dispersion of data around this point are explained. Our model generalizes or displaces other recently proposed ones, impacting for instance the statistical description of sea spray.
△ Less
Submitted 22 March, 2021; v1 submitted 20 November, 2019;
originally announced November 2019.
-
Dripping, jetting and tip streaming
Authors:
Jose M. Montanero,
Alfonso M. Ganan-Calvo
Abstract:
Dripping, jetting and tip streaming have been studied up to a certain point separately by both fluid mechanics and microfluidics communities, the former focusing on fundamental aspects while the latter on applications. Here, we intend to review this field from a global perspective by considering and linking the two sides of the problem. In the first part, we present the theoretical model used to s…
▽ More
Dripping, jetting and tip streaming have been studied up to a certain point separately by both fluid mechanics and microfluidics communities, the former focusing on fundamental aspects while the latter on applications. Here, we intend to review this field from a global perspective by considering and linking the two sides of the problem. In the first part, we present the theoretical model used to study interfacial flows arising in droplet-based microfluidics, paying attention to three elements commonly present in applications: viscoelasticity, electric fields and surfactants. We review both classical and current results about the stability of jets affected by these elements. Mechanisms leading to the breakup of jets to produce drops are reviewed as well, including some recent advances in this field. We also consider the relatively scarce theoretical studies on the emergence and stability of tip streaming flows. In the second part of this review, we focus on axisymmetric microfluidic configurations which can operate on the dripping and jetting modes either in a direct (standard) way or via tip streaming. We present the dimensionless parameters characterizing these configurations, the scaling laws which allow predicting the size of the resulting droplets and bubbles, as well as those delimiting the parameter windows where tip streaming can be found. Special attention is paid to electrospray and flow focusing, two of the techniques more frequently used in continuous drop production microfluidics. We aim to connect experimental observations described in this section of topics with fundamental and general aspects described in the first part of the review. This work closes with some prospects at both fundamental and practical levels.
△ Less
Submitted 19 June, 2020; v1 submitted 4 September, 2019;
originally announced September 2019.
-
The natural breakup length of a steady capillary jet
Authors:
Alfonso M. Ganan-Calvo,
Henry N. Chapman,
Michael Heymann,
Max O. Wiedorn,
Juraj Knoska,
Yang Du,
Braulio Ganan-Riesco,
Miguel A. Herrada,
Jose M. Lopez-Herrera,
Francisco Cruz-Mazo,
Sasa Bajt,
Jose M. Montanero
Abstract:
Despite their fundamental and applied importance, a general model to predict the natural breakup length of steady capillary jets has not been proposed yet. In this work, we derive a scaling law with two universal constants to calculate that length as a function of the liquid properties and operating conditions. These constants are determined by fitting the scaling law to a large set of experimenta…
▽ More
Despite their fundamental and applied importance, a general model to predict the natural breakup length of steady capillary jets has not been proposed yet. In this work, we derive a scaling law with two universal constants to calculate that length as a function of the liquid properties and operating conditions. These constants are determined by fitting the scaling law to a large set of experimental and numerical measurements, including previously published data. Both the experimental and numerical jet lengths conform remarkably well to the proposed scaling law. This law is explained in terms of the growth of perturbations excited by the jet breakup itself.
△ Less
Submitted 1 December, 2019; v1 submitted 28 August, 2019;
originally announced August 2019.
-
The scaling of exploding liquid jets under intense X-ray pulses
Authors:
Alfonso M. Ganan-Calvo
Abstract:
A general scaling of the evolution of an exploding liquid jet under an ultra short and intense X-ray pulse from a X-ray free electron laser (XFEL) is proposed. A general formulation of the conservation of energy for blasts in vacuum partially against a deformable object leads to a compact expression that governs the evolution of the gap produced by the explosion. The theoretical analysis contempla…
▽ More
A general scaling of the evolution of an exploding liquid jet under an ultra short and intense X-ray pulse from a X-ray free electron laser (XFEL) is proposed. A general formulation of the conservation of energy for blasts in vacuum partially against a deformable object leads to a compact expression that governs the evolution of the gap produced by the explosion. The theoretical analysis contemplates two asymptotic stages for small and large times from the initiation of the blast. A complete dimensional analysis of the problem and an optimal collapse of experimental data reveal that the universal approximate analytical solution proposed is in remarkable agreement with experiments.
△ Less
Submitted 17 December, 2018; v1 submitted 11 November, 2018;
originally announced November 2018.
-
Scaling laws of top jet drop size and speed from bubble bursting including gravity and inviscid limit
Authors:
Alfonso M. Ganan-Calvo
Abstract:
Jet droplets from bubble bursting are determined by a limited parametrical space: the liquid properties (surface tension, viscosity, and density), mother bubble size and acceleration of gravity. Thus, the two resulting parameters from dimensional analysis (usually, the Ohnesorge and Bond numbers, Oh and Bo) completely define this phenomenon when both the trapped gas in the bubble and the environme…
▽ More
Jet droplets from bubble bursting are determined by a limited parametrical space: the liquid properties (surface tension, viscosity, and density), mother bubble size and acceleration of gravity. Thus, the two resulting parameters from dimensional analysis (usually, the Ohnesorge and Bond numbers, Oh and Bo) completely define this phenomenon when both the trapped gas in the bubble and the environment gas have negligible density. A detailed physical description of the ejection process to model both the ejected droplet radius and its initial launch speed is provided, leading to a scaling law including both Oh and Bo. Two critical values of Oh determine two limiting situations: one (Oh$_1$=0.038) is the critical value for which the ejected droplet size is minimum and the ejection speed maximum, and the other (Oh$_2$=0.0045) is a new critical value which signals when viscous effects vanish. Gravity effects (Bo) are consistently introduced from energy conservation principles. The proposed scaling laws produce a remarkable collapse of published experimental measurements collected for both the ejected droplet radius and ejection speed.
△ Less
Submitted 2 April, 2019; v1 submitted 11 June, 2018;
originally announced June 2018.
-
Liquid flow-focused by a gas: jetting, dripping and recirculation
Authors:
Miguel A. Herrada,
Alfonso M. Ganan-Calvo,
Antonio Ojeda-Monge,
Benjamin Bluth,
Pascual Riesco-Chueca
Abstract:
The liquid cone-jet mode can be produced upon stimulation by a co-flowing gas sheath. Most applications deal with the jet breakup, leading to either of two droplet generation regimes: jetting and dripping. The cone-jet flow pattern is explored by direct axisymmetric VOF numerical simulation; its evolution is studied as the liquid flow-rate is increased around the jetting-dripping transition. As…
▽ More
The liquid cone-jet mode can be produced upon stimulation by a co-flowing gas sheath. Most applications deal with the jet breakup, leading to either of two droplet generation regimes: jetting and dripping. The cone-jet flow pattern is explored by direct axisymmetric VOF numerical simulation; its evolution is studied as the liquid flow-rate is increased around the jetting-dripping transition. As observed in other focused flows such as electrospraying cones upon steady thread emission, the flow displays a strong recirculating pattern within the conical meniscus; it is shown to play a role on the stability of the system, being a precursor to the onset of dripping. Close to the minimum liquid flow rate for steady jetting, the recirculation cell penetrates into the feed tube. Both the jet diameter and the size of the cell are accurately estimated by a simple theoretical model. In addition, the transition from jetting to dripping is numerically analyzed in detail in some illustrative cases, and compared, to good agreement, with a set of experiments.
△ Less
Submitted 14 May, 2008; v1 submitted 19 April, 2008;
originally announced April 2008.
-
Spatiotemporal instability of a confined capillary jet
Authors:
Miguel A. Herrada,
Alfonso M. Ganan-Calvo,
Pierre Guillot
Abstract:
Recent experimental studies on the instability appearance of capillary jets have revealed the capabilities of linear spatiotemporal instability analysis to predict the parametrical map where steady jetting or dripping takes place. In this work, we present an extensive analytical, numerical and experimental analysis of confined capillary jets extending previous studies. We propose an extended, ac…
▽ More
Recent experimental studies on the instability appearance of capillary jets have revealed the capabilities of linear spatiotemporal instability analysis to predict the parametrical map where steady jetting or dripping takes place. In this work, we present an extensive analytical, numerical and experimental analysis of confined capillary jets extending previous studies. We propose an extended, accurate analytic model in the limit of low Reynolds flows, and introduce a numerical scheme to predict the system response when the liquid inertia is not negligible. Theoretical predictions show a remarkable accuracy with results from the extensive experimental exploration provided.
△ Less
Submitted 18 April, 2008; v1 submitted 16 April, 2008;
originally announced April 2008.
-
Unconditional jetting
Authors:
Alfonso M. Ganan-Calvo
Abstract:
Capillary jetting of a fluid dispersed into another immiscible phase is usually limited by a critical Capillary number, a function of the Reynolds number and the fluid properties ratios. Critical conditions are set when the minimum spreading velocity of small perturbations $v^*_-$ along the jet (marginal stability velocity) is zero. Here we identify and describe parametrical regions of high tech…
▽ More
Capillary jetting of a fluid dispersed into another immiscible phase is usually limited by a critical Capillary number, a function of the Reynolds number and the fluid properties ratios. Critical conditions are set when the minimum spreading velocity of small perturbations $v^*_-$ along the jet (marginal stability velocity) is zero. Here we identify and describe parametrical regions of high technological relevance, where $v^*_- > 0$ and the jet flow is always supercritical independently of the dispersed liquid flow rate: within these relatively broad regions, the jet does not undergo the usual dripping-jetting transition, so that either the jet can be made arbitrarily thin (yielding droplets of any imaginably small size), or the issued flow rate can be made arbitrarily small. In this work, we provide illustrative analytical studies of asymptotic cases for both negligible and dominant inertia forces. In this latter case, requiring a non-zero jet surface velocity, axisymmetric perturbation waves ``surf'' downstream for all given wave numbers while the liquid bulk can remain static. In the former case (implying small Reynolds flow) we found that the jet profile small slope is limited by a critical value; different published experiments support our predictions.
△ Less
Submitted 13 June, 2008; v1 submitted 16 April, 2008;
originally announced April 2008.
