-
The LHCb upgrade I
Authors:
LHCb collaboration,
R. Aaij,
A. S. W. Abdelmotteleb,
C. Abellan Beteta,
F. Abudinén,
C. Achard,
T. Ackernley,
B. Adeva,
M. Adinolfi,
P. Adlarson,
H. Afsharnia,
C. Agapopoulou,
C. A. Aidala,
Z. Ajaltouni,
S. Akar,
K. Akiba,
P. Albicocco,
J. Albrecht,
F. Alessio,
M. Alexander,
A. Alfonso Albero,
Z. Aliouche,
P. Alvarez Cartelle,
R. Amalric,
S. Amato
, et al. (1298 additional authors not shown)
Abstract:
The LHCb upgrade represents a major change of the experiment. The detectors have been almost completely renewed to allow running at an instantaneous luminosity five times larger than that of the previous running periods. Readout of all detectors into an all-software trigger is central to the new design, facilitating the reconstruction of events at the maximum LHC interaction rate, and their select…
▽ More
The LHCb upgrade represents a major change of the experiment. The detectors have been almost completely renewed to allow running at an instantaneous luminosity five times larger than that of the previous running periods. Readout of all detectors into an all-software trigger is central to the new design, facilitating the reconstruction of events at the maximum LHC interaction rate, and their selection in real time. The experiment's tracking system has been completely upgraded with a new pixel vertex detector, a silicon tracker upstream of the dipole magnet and three scintillating fibre tracking stations downstream of the magnet. The whole photon detection system of the RICH detectors has been renewed and the readout electronics of the calorimeter and muon systems have been fully overhauled. The first stage of the all-software trigger is implemented on a GPU farm. The output of the trigger provides a combination of totally reconstructed physics objects, such as tracks and vertices, ready for final analysis, and of entire events which need further offline reprocessing. This scheme required a complete revision of the computing model and rewriting of the experiment's software.
△ Less
Submitted 10 September, 2024; v1 submitted 17 May, 2023;
originally announced May 2023.
-
Performance of a prototype TORCH time-of-flight detector
Authors:
Srishti Bhasin,
Thomas Blake,
Nicholas Brook,
Maria Flavia Cicala,
Thomas Conneely,
David Cussans,
Maarten van Dijk,
Roger Forty,
Christoph Frei,
Emmy Gabriel,
Rui Gao,
Timothy Gershon,
Thierry Gys,
Tom Hadavizadeh,
Thomas Hancock,
Thomas Jones,
Neville Harnew,
Michal Kreps,
James Milnes,
Didier Piedigrossi,
Jonas Rademacker,
Jennifer Clare Smallwood
Abstract:
TORCH is a novel time-of-flight detector, designed to provide charged particle identification of pions, kaons and protons in the momentum range 2-20 GeV/c over a 9.5 m flight path. A detector module, comprising a 10mm thick quartz plate, provides a source of Cherenkov photons which propagate via total internal reflection to one end of the plate. Here, the photons are focused onto an array of custo…
▽ More
TORCH is a novel time-of-flight detector, designed to provide charged particle identification of pions, kaons and protons in the momentum range 2-20 GeV/c over a 9.5 m flight path. A detector module, comprising a 10mm thick quartz plate, provides a source of Cherenkov photons which propagate via total internal reflection to one end of the plate. Here, the photons are focused onto an array of custom-designed Micro-Channel Plate Photo-Multiplier Tubes (MCP-PMTs) which measure their positions and arrival times. The target time resolution per photon is 70 ps which, for 30 detected photons per charged particle, results in a 10-15 ps time-of-flight resolution. A 1.25 m length TORCH prototype module employing two MCP-PMTs has been developed, and tested at the CERN PS using a charged hadron beam of 8 GeV/c momentum. The construction of the module, the properties of the MCP-PMTs and the readout electronics are described. Measurements of the collected photon yields and single-photon time resolutions have been performed as a function of particle entry points on the plate and compared to expectations. These studies show that the performance of the TORCH prototype approaches the design goals for the full-scale detector.
△ Less
Submitted 8 March, 2023; v1 submitted 27 September, 2022;
originally announced September 2022.
-
Picosecond timing of charged particles using the TORCH detector
Authors:
Maria Flavia Cicala,
Srishti Bhasin,
Thomas Blake,
Nick H. Brook,
Thomas Conneely,
David Cussans,
Maarten W. U. van Dijk,
Roger Forty,
Christoph Frei,
Emmy P. M. Gabriel,
Rui Gao,
Timothy Gershon,
Thierry Gys,
Thomas Hadavizadeh,
Thomas Henry Hancock,
Neville Harnew,
Thomas Jones,
Michal Kreps,
James Milnes,
Didier Piedigrossi,
Jonas Rademacker,
Jennifer Clare Smallwood
Abstract:
TORCH is a large-area, high-precision time-of-flight (ToF) detector designed to provide charged-particle identification in the 2-20 GeV$/c$ momentum range. Prompt Cherenkov photons emitted by charged hadrons as they traverse a 10mm quartz radiator are propagated to the periphery of the detector, where they are focused onto an array of micro-channel plate photomultiplier tubes (MCP-PMTs). The posit…
▽ More
TORCH is a large-area, high-precision time-of-flight (ToF) detector designed to provide charged-particle identification in the 2-20 GeV$/c$ momentum range. Prompt Cherenkov photons emitted by charged hadrons as they traverse a 10mm quartz radiator are propagated to the periphery of the detector, where they are focused onto an array of micro-channel plate photomultiplier tubes (MCP-PMTs). The position and arrival times of the photons are used to infer the particles' time of entry in the radiator, to identify hadrons based on their ToF. The MCP-PMTs were developed with an industrial partner to satisfy the stringent requirements of the TORCH detector. The requirements include a finely segmented anode, excellent time resolution, and a long lifetime. Over an approximately 10m flight distance, the difference in ToF between a kaon and a pion with 10GeV$/c$ momentum is 35ps, leading to a 10-15ps per track timing resolution requirement. On average 30 photons per hadron are detected, which translates to a single-photon time resolution of 70ps. The TORCH research and development program aims to demonstrate the validity of the detector concept through laboratory and beam tests, results from which are presented. A timing resolution of 70-100ps was reached in beam tests, approaching the TORCH design goal. Laboratory timing tests consist of operating the MCP-PMTs coupled to the TORCH readout electronics. A time resolution of about 50ps was measured, meeting the TORCH target timing resolution.
△ Less
Submitted 25 March, 2022;
originally announced March 2022.
-
Test-beam demonstration of a TORCH prototype module
Authors:
J. C. Smallwood,
S. Bhasin,
T. Blake,
N. H. Brook,
M. F. Cicala,
T. Conneely,
D. Cussans,
M. W. U. van Dijk,
R. Forty,
C. Frei,
E. P. M. Gabriel,
R. Gao,
T. Gershon,
T. Gys,
T. Hadavizadeh,
T. H. Hancock,
N. Harnew,
M. Kreps,
J. Milnes,
D. Piedigrossi,
J. Rademacker
Abstract:
The TORCH time-of-flight detector is designed to provide a 15 ps timing resolution for charged particles, resulting in $π$/$K$ particle identification up to 10 GeV/c momentum over a 10 m flight path. Cherenkov photons, produced in a quartz plate of 10 mm thickness, are focused onto an array of micro-channel plate photomultipliers (MCP-PMTs) which measure the photon arrival times and spatial positi…
▽ More
The TORCH time-of-flight detector is designed to provide a 15 ps timing resolution for charged particles, resulting in $π$/$K$ particle identification up to 10 GeV/c momentum over a 10 m flight path. Cherenkov photons, produced in a quartz plate of 10 mm thickness, are focused onto an array of micro-channel plate photomultipliers (MCP-PMTs) which measure the photon arrival times and spatial positions. A half-scale ($660\times1250\times10$ mm$^3$) TORCH demonstrator module has been tested in an 8 GeV/c mixed proton-pion beam at CERN. Customised square MCP-PMTs of active area $53\times53$ mm$^2$ and granularity $64\times64$ pixels have been employed, which have been developed in collaboration with an industrial partner. The single-photon timing performance and photon yields have been measured as a function of beam position in the radiator, giving measurements which are consistent with expectations. The expected performance of TORCH for high luminosity running of the LHCb Upgrade II has been simulated.
△ Less
Submitted 8 November, 2021;
originally announced November 2021.
-
Visualizing femtosecond dynamics with ultrafast electron probes through terahertz compression and time-stamping
Authors:
Mohamed A. K. Othman,
Emma C. Snively,
Annika E. Gabriel,
Michael E. Kozina,
Xiaozhe Shen,
Fuaho Ji,
Samantha Lewis,
Stephen Weathersby,
Duan Luo,
Xijie Wang,
Matthias C. Hoffmann,
Emilio A. Nanni
Abstract:
Visualizing ultrafast dynamics at the atomic scale requires time-resolved pump-probe characterization with femtosecond temporal resolution. For single-shot ultrafast electron diffraction (UED) with fully relativistic electron bunch probes, existing techniques are limited by the achievable electron probe bunch length, charge, and timing jitter. We present the first experimental demonstration of pum…
▽ More
Visualizing ultrafast dynamics at the atomic scale requires time-resolved pump-probe characterization with femtosecond temporal resolution. For single-shot ultrafast electron diffraction (UED) with fully relativistic electron bunch probes, existing techniques are limited by the achievable electron probe bunch length, charge, and timing jitter. We present the first experimental demonstration of pump-probe UED with THz-driven compression and time-stamping that enable UED probes with unprecedented temporal resolution. This technique utilizes two counter-propagating quasi-single-cycle THz pulses generated from two OH-1 organic crystals coupled into an optimized THz compressor structure. Ultrafast dynamics of photoexcited bismuth films show an improved temporal resolution from 178 fs down to 85 fs when the THz-compressed UED probes are used with no time-stamping correction. Furthermore, we use a novel time-stamping technique to reveal transient oscillations in the dynamical response of THz-excited single-crystal gold films previously inaccessible by standard UED, achieving a time-stamped temporal resolution down to 5 fs.
△ Less
Submitted 12 April, 2021;
originally announced April 2021.
-
Status of the TORCH Project
Authors:
N. Harnew,
S. Bhasin,
T. Blake,
N. H. Brook,
M. F. Cicala,
T. Conneely,
D. Cussans,
M. W. U. vanDijk,
R. Forty,
C. Frei,
E. P. M. Gabriel,
R. Gao,
T. Gershon,
T. Gys,
T. Hadavizadeh,
T. H. Hancock,
M. Kreps,
J. Milnes,
D. Piedigrossi,
J. Rademacker
Abstract:
The TORCH time-of-flight detector will provide particle identification between 2-10 GeV/c momentum over a flight distance of 10 m, and is designed for large-area coverage, up to 30 m^2. A 15 ps time-of-flight resolution per incident particle is anticipated by measuring the arrival times from Cherenkov photons produced in a synthetic fused silica radiator plate of 10 mm thickness. Customised Micro-…
▽ More
The TORCH time-of-flight detector will provide particle identification between 2-10 GeV/c momentum over a flight distance of 10 m, and is designed for large-area coverage, up to 30 m^2. A 15 ps time-of-flight resolution per incident particle is anticipated by measuring the arrival times from Cherenkov photons produced in a synthetic fused silica radiator plate of 10 mm thickness. Customised Micro-Channel Plate Photomultiplier Tube (MCP-PMT) photon detectors of 53 x 53 mm^2 active area with a 64 x 64 granularity have been developed with industrial partners. Test-beam studies using both a small-scale TORCH demonstrator and a half-length TORCH module are presented. The desired timing resolution of 70 ps per single photon is close to being achieved.
△ Less
Submitted 6 March, 2020;
originally announced March 2020.
-
Test-beam studies of a small-scale TORCH time-of-flight demonstrator
Authors:
S. Bhasin,
T. Blake,
N. Brook,
T. Conneely,
D. Cussans,
R. Forty,
C. Frei,
E. P. M. Gabriel,
R. Gao,
T. Gershon,
T. Gys,
T. Hadavizadeh,
T. H. Hancock,
N. Harnew,
M. Kreps,
J. Milnes,
D. Piedigrossi,
J. Rademacker,
M. van Dijk
Abstract:
TORCH is a time-of-flight detector designed to perform particle identification over the momentum range 2$-$10 GeV/c for a 10 m flight path. The detector exploits prompt Cherenkov light produced by charged particles traversing a quartz plate of 10 mm thickness. Photons are then trapped by total internal reflection and directed onto a detector plane instrumented with customised position-sensitive Mi…
▽ More
TORCH is a time-of-flight detector designed to perform particle identification over the momentum range 2$-$10 GeV/c for a 10 m flight path. The detector exploits prompt Cherenkov light produced by charged particles traversing a quartz plate of 10 mm thickness. Photons are then trapped by total internal reflection and directed onto a detector plane instrumented with customised position-sensitive Micro-Channel Plate Photo-Multiplier Tube (MCP-PMT) detectors. A single-photon timing resolution of 70 ps is targeted to achieve the desired separation of pions and kaons, with an expectation of around 30 detected photons per track. Studies of the performance of a small-scale TORCH demonstrator with a radiator of dimensions 120 $\times$ 350 $\times$ 10 mm$^3$ have been performed in two test-beam campaigns during November 2017 and June 2018. Single-photon time resolutions ranging from 104.3 ps to 114.8 ps and 83.8 ps to 112.7 ps have been achieved for MCP-PMTs with granularity 4 $\times$ 64 and 8 $\times$ 64 pixels, respectively. Photon yields are measured to be within $\sim$10% and $\sim$30% of simulation, respectively. Finally, the outlook for future work with planned improvements is presented.
△ Less
Submitted 18 February, 2020;
originally announced February 2020.
-
Beam tests of a large-scale TORCH time-of-flight demonstrator
Authors:
Thomas H. Hancock,
Srishti Bhasin,
Thomas Blake,
Nicholas Brook,
Tom Conneely,
David Cussans,
Roger Forty,
Christophe Frei,
Emmy P. M. Gabriel,
Rui Gao,
Timothy Gershon,
Thierry Gys,
Tom T. Hadavizadeh,
Neville Harnew,
Michel Kreps,
James Milnes,
Didier Piedigrossi,
Jonas Rademacker,
Maarten van Dijk
Abstract:
The TORCH time-of-flight detector is designed to provide particle identification in the momentum range 2-10 GeV/c over large areas. The detector exploits prompt Cherenkov light produced by charged particles traversing a 10 mm thick quartz plate. The photons propagate via total internal reflection and are focused onto a detector plane comprising position-sensitive Micro-Channel Plate Photo-Multipli…
▽ More
The TORCH time-of-flight detector is designed to provide particle identification in the momentum range 2-10 GeV/c over large areas. The detector exploits prompt Cherenkov light produced by charged particles traversing a 10 mm thick quartz plate. The photons propagate via total internal reflection and are focused onto a detector plane comprising position-sensitive Micro-Channel Plate Photo-Multiplier Tubes (MCP-PMT) detectors. The goal is to achieve a single-photon timing resolution of 70 ps, giving a timing precision of 15 ps per charged particle by combining the information from around 30 detected photons. The MCP-PMT detectors have been developed with a commercial partner (Photek Ltd, UK), leading to the delivery of a square tube of active area 53 $\times$ 53mm$^2$ with a granularity of 8 $\times$ 128 pixels equivalent. A large-scale demonstrator of TORCH, having a quartz plate of dimensions 660 $\times$ 1250 $\times$ 10 mm$^3$ and read out by a pair of MCP-PMTs with custom readout electronics, has been verified in a test beam campaign at the CERN PS. Preliminary results indicate that the required performance is close to being achieved. The anticipated performance of a full-scale TORCH detector at the LHCb experiment is presented.
△ Less
Submitted 25 April, 2019;
originally announced April 2019.
-
Status of the TORCH time-of-flight project
Authors:
Neville Harnew,
Srishti Bhasin,
Thomas Blake,
Nicholas Brook,
Tom Conneely,
David Cussans,
Maarten van Dijk,
Roger Forty,
Christoph Frei,
Emmy Gabriel,
Rui Gao,
Timothy Gershon,
Thierry Gys,
Tom Hadavizadeh,
Thomas Hancock,
Michel Kreps,
James Milnes,
Didier Piedigrossi,
Jonas Rademacker
Abstract:
TORCH is a time-of-flight detector, designed to provide charged pi/K particle identification up to a momentum of 10 GeV/c for a 10 m flight path. To achieve this level of performance, a time resolution of 15 ps per incident particle is required. TORCH uses a plane of quartz of 1 cm thickness as a source of Cherenkov photons, which are then focussed onto square Micro-Channel Plate Photomultipliers…
▽ More
TORCH is a time-of-flight detector, designed to provide charged pi/K particle identification up to a momentum of 10 GeV/c for a 10 m flight path. To achieve this level of performance, a time resolution of 15 ps per incident particle is required. TORCH uses a plane of quartz of 1 cm thickness as a source of Cherenkov photons, which are then focussed onto square Micro-Channel Plate Photomultipliers (MCP-PMTs) of active area 53 x 53 mm^2, segmented into 8 x 128 pixels equivalent. A small-scale TORCH demonstrator with a customised MCP-PMT and associated readout electronics has been successfully operated in a 5 GeV/c mixed pion/proton beam at the CERN PS facility. Preliminary results indicate that a single-photon resolution better than 100 ps can be achieved. The expected performance of a full-scale TORCH detector for the Upgrade II of the LHCb experiment is also discussed.
△ Less
Submitted 23 December, 2018;
originally announced December 2018.
-
TORCH: a large area time-of-flight detector for particle identification
Authors:
Neville Harnew,
Srishti Bhasin,
Thomas Blake,
Nicholas Brook,
Tom Conneely,
David Cussans,
Maarten van Dijk,
Roger Forty,
Christophe Frei,
Emmy Gabriel,
Rui Gao,
Timothy Gershon,
Thierry Gys,
Tom T. Hadavizadeh,
Thomas Hancock,
Michel Kreps,
James Milnes,
Didier Piedigrossi,
Jonas Rademacker
Abstract:
TORCH is a time-of-flight detector that is being developed for the Upgrade II of the LHCb experiment, with the aim of providing charged particle identification over the momentum range 2-10 GeV/c. A small-scale TORCH demonstrator with customised readout electronics has been operated successfully in beam tests at the CERN PS. Preliminary results indicate that a single-photon resolution better than 1…
▽ More
TORCH is a time-of-flight detector that is being developed for the Upgrade II of the LHCb experiment, with the aim of providing charged particle identification over the momentum range 2-10 GeV/c. A small-scale TORCH demonstrator with customised readout electronics has been operated successfully in beam tests at the CERN PS. Preliminary results indicate that a single-photon resolution better than 100 ps can be achieved.
△ Less
Submitted 3 December, 2018; v1 submitted 15 October, 2018;
originally announced October 2018.
