-
Local Nanoscale Defective Phase Impurities Are the Sites of Degradation in Halide Perovskite Devices
Authors:
Stuart Macpherson,
Tiarnan A. S. Doherty,
Andrew J. Winchester,
Sofiia Kosar,
Duncan N. Johnstone,
Yu-Hsien Chiang,
Krzystof Galkowski,
Miguel Anaya,
Kyle Frohna,
Affan N. Iqbal,
Bart Roose,
Zahra Andaji-Garmaroudi,
Paul A. Midgley,
Keshav M. Dani,
Samuel D. Stranks
Abstract:
Halide perovskites excel in the pursuit of highly efficient thin film photovoltaics, with power conversion efficiencies reaching 25.5% in single junction and 29.5% in tandem halide perovskite/silicon solar cell configurations. Operational stability of perovskite solar cells remains a barrier to their commercialisation, yet a fundamental understanding of degradation processes, including the specifi…
▽ More
Halide perovskites excel in the pursuit of highly efficient thin film photovoltaics, with power conversion efficiencies reaching 25.5% in single junction and 29.5% in tandem halide perovskite/silicon solar cell configurations. Operational stability of perovskite solar cells remains a barrier to their commercialisation, yet a fundamental understanding of degradation processes, including the specific sites at which failure mechanisms occur, is lacking. Recently, we reported that performance-limiting deep sub-bandgap states appear in nanoscale clusters at particular grain boundaries in state-of-the-art $Cs_{0.05}FA_{0.78}MA_{0.17}Pb(I_{0.83}Br_{0.17})_{3}$ (MA=methylammonium, FA=formamidinium) perovskite films. Here, we combine multimodal microscopy to show that these very nanoscale defect clusters, which go otherwise undetected with bulk measurements, are sites at which degradation seeds. We use photoemission electron microscopy to visualise trap clusters and observe that these specific sites grow in defect density over time under illumination, leading to local reductions in performance parameters. Scanning electron diffraction measurements reveal concomitant structural changes at phase impurities associated with trap clusters, with rapid conversion to metallic lead through iodine depletion, eventually resulting in pinhole formation. By contrast, illumination in the presence of oxygen reduces defect densities and reverses performance degradation at these local clusters, where phase impurities instead convert to amorphous and electronically benign lead oxide. Our work shows that the trapping of charge carriers at sites associated with phase impurities, itself reducing performance, catalyses redox reactions that compromise device longevity. Importantly, we reveal that both performance losses and intrinsic degradation can be mitigated by eliminating these defective clusters.
△ Less
Submitted 20 July, 2021;
originally announced July 2021.
-
Local energy landscape drives long exciton diffusion in 2D halide perovskite semiconductors
Authors:
Alan Baldwin,
Géraud Delport,
Kai Leng,
Rosemonde Chahbazian,
Krzysztof Galkowski,
Kian Ping Loh,
Samuel D. Stranks
Abstract:
Halide perovskites have emerged as disruptive semiconductors for applications including photovoltaics and light emitting devices, with modular optoelectronic properties realisable through composition and dimensionality tuning. Layered Ruddlesden-Popper perovskites of the form BA2MAn-1PbnI3n+1, where n is the number of lead-halide and methylammonium (MA) sheets spaced by longer butylammonium (BA) c…
▽ More
Halide perovskites have emerged as disruptive semiconductors for applications including photovoltaics and light emitting devices, with modular optoelectronic properties realisable through composition and dimensionality tuning. Layered Ruddlesden-Popper perovskites of the form BA2MAn-1PbnI3n+1, where n is the number of lead-halide and methylammonium (MA) sheets spaced by longer butylammonium (BA) cations, are particularly interesting due to their unique two-dimensional character and charge carrier dynamics dominated by strongly bound excitons. However, long-range energy transport through exciton diffusion in these materials is not understood or realised. Here, we employ local time-resolved luminescence mapping techniques to visualise exciton transport in high-quality exfoliated flakes of the BA2MAn-1PbnI3n+1 perovskite family. We uncover two distinct transport regimes, depending on the temperature range studied. At temperatures above 100 K, diffusion is mediated by thermally activated hopping processes between localised states. At lower temperatures, a non-uniform energetic landscape emerges in which exciton transport is dominated by energy funnelling processes to lower energy states, leading to long range transport over hundreds of nanometres even in the absence of exciton-phonon coupling and in the presence of local optoelectronic heterogeneity. Efficient, long-range and switchable excitonic funnelling offers exciting possibilities of controlled directional long-range transport in these 2D materials for new device applications.
△ Less
Submitted 29 October, 2020;
originally announced October 2020.
-
Identifying and reducing interfacial losses to enhance color-pure electroluminescence in blue-emitting perovskite nanoplatelet light-emitting diodes
Authors:
Robert L. Z. Hoye,
May-Ling Lai,
Miguel Anaya,
Yu Tong,
Krzysztof Gałkowski,
Tiarnan Doherty,
Weiwei Li,
Tahmida N. Huq,
Sebastian Mackowski,
Lakshminarayana Polavarapu,
Jochen Feldmann,
Judith L. MacManus-Driscoll,
Richard H. Friend,
Alexander S. Urban,
Samuel D. Stranks
Abstract:
Perovskite nanoplatelets (NPls) hold great promise for light-emitting applications, having achieved high photoluminescence quantum efficiencies (PLQEs) approaching unity in the blue wavelength range, where other metal-halide perovskites have typically been ineffective. However, the external quantum efficiency (EQE) of blue-emitting NPl light-emitting diodes (LEDs) have only reached 0.12%, with typ…
▽ More
Perovskite nanoplatelets (NPls) hold great promise for light-emitting applications, having achieved high photoluminescence quantum efficiencies (PLQEs) approaching unity in the blue wavelength range, where other metal-halide perovskites have typically been ineffective. However, the external quantum efficiency (EQE) of blue-emitting NPl light-emitting diodes (LEDs) have only reached 0.12%, with typical values well below 0.1%. In this work, we show that the performance of NPl LEDs is primarily hindered by a poor electronic interface between the emitter and hole-injector. Through Kelvin Probe and X-ray photoemission spectroscopy measurements, we reveal that the NPls have remarkably deep ionization potentials (>=6.5 eV), leading to large barriers for hole injection, as well as substantial non-radiative decay at the interface between the emitter and hole-injector. We find that an effective way to reduce these non-radiative losses is by using poly(triarylamine) interlayers. This results in an increase in the EQE of our blue LEDs emitting at 464 nm wavelength to 0.3%. We find that our results can be generalized to thicker sky-blue-emitting NPls, where we increase the EQE to 0.55% using the poly(triarylamine) interlayer. Our work also identifies the key challenges for further efficiency increases.
△ Less
Submitted 28 October, 2020;
originally announced October 2020.
-
Site-selective measurement of coupled spin pairs in an organic semiconductor
Authors:
Sam L. Bayliss,
Leah R. Weiss,
Anatol Mitioglu,
Krzysztof Galkowski,
Zhuo Yang,
Kamila Yunusova,
Alessandro Surrente,
Karl J. Thorley,
Jan Behrends,
Robert Bittl,
John E. Anthony,
Akshay Rao,
Richard H. Friend,
Paulina Plochocka,
Peter C. M. Christianen,
Neil C. Greenham,
Alexei D. Chepelianskii
Abstract:
From organic electronics to biological systems, understanding the role of intermolecular interactions between spin pairs is a key challenge. Here we show how such pairs can be selectively addressed with combined spin and optical sensitivity. We demonstrate this for bound pairs of spin-triplet excitations formed by singlet fission, with direct applicability across a wide range of synthetic and biol…
▽ More
From organic electronics to biological systems, understanding the role of intermolecular interactions between spin pairs is a key challenge. Here we show how such pairs can be selectively addressed with combined spin and optical sensitivity. We demonstrate this for bound pairs of spin-triplet excitations formed by singlet fission, with direct applicability across a wide range of synthetic and biological systems. We show that the site-sensitivity of exchange coupling allows distinct triplet pairs to be resonantly addressed at different magnetic fields, tuning them between optically bright singlet (S=0) and dark triplet, quintet (S=1,2) configurations: this induces narrow holes in a broad optical emission spectrum, uncovering exchange-specific luminescence. Using fields up to 60 T, we identify three distinct triplet-pair sites, with exchange couplings varying over an order of magnitude (0.3-5 meV), each with its own luminescence spectrum, coexisting in a single material. Our results reveal how site-selectivity can be achieved for organic spin pairs in a broad range of systems.
△ Less
Submitted 14 March, 2018;
originally announced March 2018.
-
The impact of the halide cage on the electronic properties of fully inorganic caesium lead halide perovskites
Authors:
Z. Yang,
A. Surrente,
K. Galkowski,
A. Miyata,
O. Portugall,
R. J. Sutton,
A. A. Haghighirad,
H. J. Snaith,
D. K. Maude,
P. Plochocka,
R. J. Nicholas
Abstract:
Perovskite solar cells with record power conversion efficiency are fabricated by alloying both hybrid and fully inorganic compounds. While the basic electronic properties of the hybrid perovskites are now well understood, key electronic parameters for solar cell performance, such as the exciton binding energy of fully inorganic perovskites, are still unknown. By performing magneto transmission mea…
▽ More
Perovskite solar cells with record power conversion efficiency are fabricated by alloying both hybrid and fully inorganic compounds. While the basic electronic properties of the hybrid perovskites are now well understood, key electronic parameters for solar cell performance, such as the exciton binding energy of fully inorganic perovskites, are still unknown. By performing magneto transmission measurements, we determine with high accuracy the exciton binding energy and reduced mass of fully inorganic CsPbX$_3$ perovskites (X=I, Br, and an alloy of these). The well behaved (continuous) evolution of the band gap with temperature in the range $4-270$\,K suggests that fully inorganic perovskites do not undergo structural phase transitions like their hybrid counterparts. The experimentally determined dielectric constants indicate that at low temperature, when the motion of the organic cation is frozen, the dielectric screening mechanism is essentially the same both for hybrid and inorganic perovskites, and is dominated by the relative motion of atoms within the lead-halide cage.
△ Less
Submitted 14 June, 2017;
originally announced June 2017.
