Design, Construction, and Testing of the APOLLO ATCA Blades for Use at the HL-LHC
Authors:
Alp Akpinar,
Aymeric Blaizot,
Serhii Cholak,
Gianfranco de Castro,
Zeynep Demiragli,
Alec Duquette,
Jonathan Richard Fulcher,
Dan Gastler,
Kristian Hahn,
Eric Shearer Hazen,
Si Hyun Jeon,
Peace Kotamnives,
Alexander Madorsky,
David Monk,
Sheena Noorudhin,
Michael Oshiro,
James Rohlf,
Charles Ralph Strohman,
Emily Minyun Tsai,
Peter Wittich,
Siqi Yuan,
Rui Zou
Abstract:
The Apollo Advanced Telecommunications Computing Architecture (ATCA) platform is an open-source design consisting of a generic "Service Module" (SM) and a customizable "Command Module" (CM), allowing for cost-effective use in applications such as the readout of the inner tracker and the Level-1 track trigger for the CMS Phase-II upgrade at the HL-LHC. The SM integrates an intelligent IPMC, robust…
▽ More
The Apollo Advanced Telecommunications Computing Architecture (ATCA) platform is an open-source design consisting of a generic "Service Module" (SM) and a customizable "Command Module" (CM), allowing for cost-effective use in applications such as the readout of the inner tracker and the Level-1 track trigger for the CMS Phase-II upgrade at the HL-LHC. The SM integrates an intelligent IPMC, robust power entry and conditioning systems, a powerful system-on-module computer, and flexible clock and communication infrastructure. The CM is designed around two Xilinx Ultrascale+ FPGAs and high-density, high-bandwidth optical transceivers capable of 25 Gb/s. Crates of Apollo blades are currently being tested at Boston University, Cornell University, and CERN.
△ Less
Submitted 21 March, 2025; v1 submitted 7 January, 2025;
originally announced January 2025.
The CMS Data Acquisition System for the Phase-2 Upgrade
Authors:
Jean-Marc André,
Ulf Behrens,
Andrea Bocci,
James Branson,
Sergio Cittolin,
Diego Da Silva Gomes,
Georgiana-Lavinia Darlea,
Christian Deldicque,
Zeynep Demiragli,
Marc Dobson,
Nicolas Doualot,
Samim Erhan,
Jonathan Richard Fulcher,
Dominique Gigi,
Maciej Gladki,
Frank Glege,
Guillelmo Gomez-Ceballos,
Magnus Hansen,
Jeroen Hegeman,
André Holzner,
Michael Lettrich,
Audrius Mecionis,
Frans Meijers,
Emilio Meschi,
Remigius K. Mommsen
, et al. (20 additional authors not shown)
Abstract:
During the third long shutdown of the CERN Large Hadron Collider, the CMS Detector will undergo a major upgrade to prepare for Phase-2 of the CMS physics program, starting around 2026. The upgraded CMS detector will be read out at an unprecedented data rate of up to 50 Tb/s with an event rate of 750 kHz, selected by the level-1 hardware trigger, and an average event size of 7.4 MB. Complete events…
▽ More
During the third long shutdown of the CERN Large Hadron Collider, the CMS Detector will undergo a major upgrade to prepare for Phase-2 of the CMS physics program, starting around 2026. The upgraded CMS detector will be read out at an unprecedented data rate of up to 50 Tb/s with an event rate of 750 kHz, selected by the level-1 hardware trigger, and an average event size of 7.4 MB. Complete events will be analyzed by the High-Level Trigger (HLT) using software algorithms running on standard processing nodes, potentially augmented with hardware accelerators. Selected events will be stored permanently at a rate of up to 7.5 kHz for offline processing and analysis. This paper presents the baseline design of the DAQ and HLT systems for Phase-2, taking into account the projected evolution of high speed network fabrics for event building and distribution, and the anticipated performance of general purpose CPU. In addition, some opportunities offered by reading out and processing parts of the detector data at the full LHC bunch crossing rate (40 MHz) are discussed.
△ Less
Submitted 23 June, 2018;
originally announced June 2018.
