-
Thermal fingers in cold channels: Thermo-viscous instability in dispersive flow
Authors:
Federico Lanza,
Gaute Linga,
Fabian Barras,
Eirik Grude Flekkøy
Abstract:
An instability may occur when a hot viscous fluid, such as magma, flows into a thin gap and cools due to heat transfer to the surrounding environment, such as the host rock. Fluids that exhibit a drastic increase in viscosity as they cool give rise to a feedback loop where hotter regions flow faster, cooling more slowly, thus forming ``fingers'' of hot fluid. To investigate this phenomenon, we emp…
▽ More
An instability may occur when a hot viscous fluid, such as magma, flows into a thin gap and cools due to heat transfer to the surrounding environment, such as the host rock. Fluids that exhibit a drastic increase in viscosity as they cool give rise to a feedback loop where hotter regions flow faster, cooling more slowly, thus forming ``fingers'' of hot fluid. To investigate this phenomenon, we employ a model system in which hot fluid is injected into a Hele-Shaw cell where the top and bottom plates exchange heat between the fluid and a cold environment. We include both thermal diffusion and hydrodynamic dispersion in a two-dimensional description, allowing us to address the dependence of the instability on the Péclet number (ratio of advective to diffusive fluxes). We perform numerical simulations of temperature-dependent viscous fluid flow and find that finger-like instabilities emerge in response to small perturbations in the inlet velocity, depending on three control parameters: the Péclet number, the viscosity contrast, and the cooling rate through the confining plates. Using linear stability analysis, we compute the dispersion relation and determine how the fastest growth rate $γ_{\max}$ and the corresponding wavenumber $k_{\max}$ depend on these parameters. We also derive analytical expressions for $γ_{\max}$ and $ k_{\max}$ valid in the regime of high Péclet number and high viscosity contrast. The results provide new insights into the mechanisms driving such instabilities, which could influence the formation and propagation of preferred pathways during fissure eruptions in geophysical contexts.
△ Less
Submitted 8 July, 2025;
originally announced July 2025.
-
Droplet spreading in a wedge: A route to fluid rheology for power-law liquids
Authors:
Marcel Moura,
Vanessa Kern,
Knut Jørgen Måløy,
Andreas Carlson,
Eirik G. Flekkøy
Abstract:
Measuring the rheology of liquids typically requires precise control over shear rates and stresses. Here, we describe an alternative route for predicting the characteristic features of a power-law fluid by simply observing the capillary spreading dynamics of viscous droplets in a wedge-shaped geometry. In this confined setting, capillary and viscous forces interact to produce a spreading dynamics…
▽ More
Measuring the rheology of liquids typically requires precise control over shear rates and stresses. Here, we describe an alternative route for predicting the characteristic features of a power-law fluid by simply observing the capillary spreading dynamics of viscous droplets in a wedge-shaped geometry. In this confined setting, capillary and viscous forces interact to produce a spreading dynamics described by anomalous diffusion, a process where the front position grows as a power-law in time with an exponent that differs from the value $1/2$ found in classical diffusion. We derive a nonlinear diffusion equation that captures this behavior, and we show that the diffusion exponent is directly related to the rheological exponent of the fluid. We verify this relationship by using both experiments and simulations for different power-law fluids. As the predictions are independent from flow-specific details, this approach provides a robust tool for inferring rheological properties from the spreading dynamics.
△ Less
Submitted 10 July, 2025; v1 submitted 24 January, 2025;
originally announced January 2025.
-
Interaction between corner and bulk flows during drainage in granular porous media
Authors:
Paula Reis,
Gaute Linga,
Marcel Moura,
Per Arne Rikvold,
Renaud Toussaint,
Eirik Grude Flekkøy,
Knut Jørgen Måløy
Abstract:
Drainage in porous media can be broken down into two main mechanisms: a primary piston-like displacement of the interfaces through the bulk of pore bodies and throats, and a secondary slow flow through corners and films in the wake of the invasion front. In granular porous media, this secondary drainage mechanism unfolds in connected pathways of pendular structures, such as capillary bridges and l…
▽ More
Drainage in porous media can be broken down into two main mechanisms: a primary piston-like displacement of the interfaces through the bulk of pore bodies and throats, and a secondary slow flow through corners and films in the wake of the invasion front. In granular porous media, this secondary drainage mechanism unfolds in connected pathways of pendular structures, such as capillary bridges and liquid rings, formed between liquid clusters. To represent both mechanisms, we proposed a dynamic dual-network model for drainage, considering that a gas displaces a wetting liquid from quasi-2D granular porous media. For this model, dedicated analyses of the capillary bridge shapes and hydraulic conductivity were conducted so that the secondary drainage mechanism could be properly quantified at finite speeds. With the model, an investigation of the wetting-phase connectivity and flow during drainage was carried out, covering a broad range of flow conditions. Results indicate that the span of liquid-connected structures in the unsaturated region, as well as their ability to contribute to flow, varies significantly with Capillary and Bond numbers.
△ Less
Submitted 9 September, 2024;
originally announced September 2024.
-
Mapping dissolved carbon in space and time: An experimental technique for the measurement of pH and total carbon concentration in density driven convection of CO$_2$ dissolved in water
Authors:
Hilmar Yngvi Birggison,
Yao Xu,
Marcel Moura,
Eirik Grude Flekkøy,
Knut Jørgen Måløy
Abstract:
We present an experimental technique for determining the pH and the total carbon concentration when \ch{CO2} diffuses and flows in water. The technique employs three different pH indicators, which, when combined with an image analysis technique, provides a dynamic range in pH from 4.0 to 9.5. In contrast to usual techniques in which a single pH indicator is used, the methodology presented allows n…
▽ More
We present an experimental technique for determining the pH and the total carbon concentration when \ch{CO2} diffuses and flows in water. The technique employs three different pH indicators, which, when combined with an image analysis technique, provides a dynamic range in pH from 4.0 to 9.5. In contrast to usual techniques in which a single pH indicator is used, the methodology presented allows not only to produce a binary classification (pH larger or smaller than a given threshold) but to access a much more complete continuous spatial distribution of pH and concentration levels in the system. We calibrate the method against benchmark solutions and further demonstrate its potential by measuring the pH and total carbon concentration in a density driven convection (DDC) of carbon-enriched water. The motivation for testing the method in this particular experiment comes from the fact that DDC plays a pivotal role in the efficiency of engineered carbon storage processes. The application of the technique presented here provided a direct window for the analysis of the spatial distribution of captured carbon in the DDC flow.
△ Less
Submitted 9 May, 2024;
originally announced May 2024.
-
A simplified pore-scale model for slow drainage including film-flow effects
Authors:
Paula Reis,
Marcel Moura,
Gaute Linga,
Per Arne Rikvold,
Eirik Grude Flekkøy,
Knut Jørgen Måloy
Abstract:
Film flow through networks of corners and capillary bridges can establish connections between seemingly isolated clusters during drainage in porous media. Coupled with drainage through the bulk of pores and throats, the flow through these networks constitutes a secondary drainage mechanism that can significantly affect fluid configurations and residual saturations. In order to investigate the prev…
▽ More
Film flow through networks of corners and capillary bridges can establish connections between seemingly isolated clusters during drainage in porous media. Coupled with drainage through the bulk of pores and throats, the flow through these networks constitutes a secondary drainage mechanism that can significantly affect fluid configurations and residual saturations. In order to investigate the prevalence of this drainage mechanism, we propose a quasi-static pore-network model based on modifying the trapped-cluster-identification algorithm in an invasion-percolation model. With the modification, wetting-phase connectivity could be provided by direct successions of pores and throats, represented by sites and bonds, as well as by chains of interconnected capillary bridges. The advancement of the fluid interface in the porous matrix was determined by the bonds' invasion thresholds, calculated based on local capillary pressure values that could be perturbed to accommodate gravitational effects. With the proposed model, experimentally verified phenomena related to slow drainage in granular porous media were reproduced, showing good qualitative agreement.
△ Less
Submitted 6 March, 2023;
originally announced March 2023.
-
A statistical mechanics for immiscible and incompressible two-phase flow in porous media
Authors:
Alex Hansen,
Eirik G. Flekkøy,
Santanu Sinha,
Per Arne Slotte
Abstract:
We construct a statistical mechanics for immiscible and incompressible two-phase flow in porous media under local steady-state conditions based on the Jaynes maximum entropy principle. A cluster entropy is assigned to our lack of knowledge of, and control over, the fluid and flow configurations in the pore space. As a consequence, two new variables describing the flow emerge: The agiture, that des…
▽ More
We construct a statistical mechanics for immiscible and incompressible two-phase flow in porous media under local steady-state conditions based on the Jaynes maximum entropy principle. A cluster entropy is assigned to our lack of knowledge of, and control over, the fluid and flow configurations in the pore space. As a consequence, two new variables describing the flow emerge: The agiture, that describes the level of agitation of the two fluids, and the flow derivative which is conjugate to the saturation. Agiture and flow derivative are the analogs of temperature and chemical potential in standard (thermal) statistical mechanics. The associated thermodynamics-like formalism reveals a number of hitherto unknown relations between the variables that describe the flow, including fluctuations. The formalism opens for new approaches to characterize porous media with respect to multi-phase flow for practical applications, replacing the simplistic relative permeability theory while still keeping the number of variables tractable.
△ Less
Submitted 27 May, 2022;
originally announced May 2022.
-
Burst dynamics, up-scaling and dissipation of slow drainage in porous media
Authors:
Knut Jørgen Måløy,
Marcel Moura,
Alex Hansen,
Eirik Grude Flekkøy,
Renaud Toussaint
Abstract:
We present a theoretical and experimental investigation of drainage in porous media. The study is limited to stabilized fluid fronts at moderate injection rates, but it takes into account capillary, viscous, and gravitational forces. In this theory the work applied on the system, the energy dissipation, the final saturation and the width of the stabilized fluid front can all be calculated if we kn…
▽ More
We present a theoretical and experimental investigation of drainage in porous media. The study is limited to stabilized fluid fronts at moderate injection rates, but it takes into account capillary, viscous, and gravitational forces. In this theory the work applied on the system, the energy dissipation, the final saturation and the width of the stabilized fluid front can all be calculated if we know the dimensionless fluctuation number, the wetting properties, the surface tension between the fluids, the fractal dimensions of the invasion front and the invading structure, and the exponent describing the divergence of the correlation length in percolation. This theoretical description explains how the Haines jumps' local activity and dissipation relate to dissipation on larger scales.
△ Less
Submitted 16 December, 2021; v1 submitted 18 October, 2021;
originally announced October 2021.
-
Thermal weakening of cracks and brittle-ductile transition: a phase model
Authors:
Tom Vincent-Dospital,
Renaud Toussaint,
Alain Cochard,
Knut Jørgen Måløy,
Eirik G. Flekkøy
Abstract:
We present a model for the thermally activated propagation of cracks in elastic matrices. The propagation is considered as a subcritical phenomenon, the kinetics of which being described by an Arrhenius law. In this law, we take the thermal evolution of the crack front into account, assuming that a portion of the released mechanical energy is transformed into heat in a plastic process zone. We sho…
▽ More
We present a model for the thermally activated propagation of cracks in elastic matrices. The propagation is considered as a subcritical phenomenon, the kinetics of which being described by an Arrhenius law. In this law, we take the thermal evolution of the crack front into account, assuming that a portion of the released mechanical energy is transformed into heat in a plastic process zone. We show that such a model leads to a two-phase crack propagation: a first phase at low velocity in which the temperature elevation is of little effect and the propagation is mainly governed by the mechanical load and by the toughness of the medium, and a second phase in which the crack is thermally weakened and propagates at greater velocity. Such a dual behavior can potentially explain the usual stick-slip in brittle fracturing, and we illustrate how with numerical simulations of mode I cracks propagating in thin disordered media. In addition, we predict the existence of a limiting ambient temperature above which the weakened phase ceases to exist and we propose this critical phenomenon as a novel explanation for the brittle-ductile transition of solids.
△ Less
Submitted 25 February, 2020; v1 submitted 14 January, 2019;
originally announced January 2019.
-
Rheology of High-Capillary Number Flow in Porous Media
Authors:
Santanu Sinha,
Magnus Aa. Gjennestad,
Morten Vassvik,
Mathias Winkler,
Alex Hansen,
Eirik G. Flekkøy
Abstract:
Immiscible fluids flowing at high capillary numbers in porous media may be characterized by an effective viscosity. We demonstrate that the effective viscosity is well described by the Lichtenecker-Rother equation. The exponent $α$ in this equation takes either the value 1 or 0.6 in two- and 0.5 in three-dimensional systems depending on the pore geometry. Our arguments are based on analytical and…
▽ More
Immiscible fluids flowing at high capillary numbers in porous media may be characterized by an effective viscosity. We demonstrate that the effective viscosity is well described by the Lichtenecker-Rother equation. The exponent $α$ in this equation takes either the value 1 or 0.6 in two- and 0.5 in three-dimensional systems depending on the pore geometry. Our arguments are based on analytical and numerical methods.
△ Less
Submitted 19 December, 2017;
originally announced December 2017.
-
Verification of a dynamic scaling for the pair correlation function during the slow drainage of a porous medium
Authors:
Marcel Moura,
Knut Jørgen Måløy,
Eirik Grude Flekkøy,
Renaud Toussaint
Abstract:
We give experimental grounding for the remarkable observation made by Furuberg et al. in Ref. [furuberg1988] of an unusual dynamic scaling for the pair correlation function $N(r,t)$ during the slow drainage of a porous medium. The authors of that paper have used an invasion percolation algorithm to show numerically that the probability of invasion of a pore at a distance $r$ away and after a time…
▽ More
We give experimental grounding for the remarkable observation made by Furuberg et al. in Ref. [furuberg1988] of an unusual dynamic scaling for the pair correlation function $N(r,t)$ during the slow drainage of a porous medium. The authors of that paper have used an invasion percolation algorithm to show numerically that the probability of invasion of a pore at a distance $r$ away and after a time $t$ from the invasion of another pore, scales as $N(r,t)\propto r^{-1}f\left(r^{D}/t\right)$, where $D$ is the fractal dimension of the invading cluster and the function $f(u)\propto u^{1.4}$, for $u \ll 1$ and $f(u)\propto u^{-0.6}$, for $u \gg 1$. Our experimental setup allows us to have full access to the spatiotemporal evolution of the invasion, which was used to directly verify this scaling. Additionally, we have connected two important theoretical contributions from the literature to explain the functional dependency of $N(r,t)$ and the scaling exponent for the short-time regime ($t \ll r^{D}$). A new theoretical argument was developed to explain the long-time regime exponent ($t \gg r^{D}$).
△ Less
Submitted 30 August, 2017; v1 submitted 24 January, 2017;
originally announced January 2017.
-
A General Criterion for Liquefaction in Granular Layers with Heterogeneous Pore Pressure
Authors:
Liran Goren,
Renaud Toussaint,
Einat Aharonov,
David Sparks,
Eirik Grude Flekkøy
Abstract:
Fluid-saturated granular and porous layers can undergo liquefaction and lose their shear resistance when subjected to shear forcing. In geosystems, such a process can lead to severe natural hazards of soil liquefaction, accelerating slope failure, and large earthquakes. Terzaghi's principle of effective stress predicts that liquefaction occurs when the pore pressure within the layer becomes equal…
▽ More
Fluid-saturated granular and porous layers can undergo liquefaction and lose their shear resistance when subjected to shear forcing. In geosystems, such a process can lead to severe natural hazards of soil liquefaction, accelerating slope failure, and large earthquakes. Terzaghi's principle of effective stress predicts that liquefaction occurs when the pore pressure within the layer becomes equal to the applied normal stress on the layer. However, under dynamic loading and when the internal permeability is relatively small the pore pressure is spatially heterogeneous and it is not clear what measurement of pore pressure should be used in Terzaghi's principle. Here, we show theoretically and demonstrate using numerical simulations a general criterion for liquefaction that applies also for the cases in which the pore pressure is spatially heterogeneous. The general criterion demands that the average pore pressure along a continuous surface within the fluid-saturated granular or porous layer is equal to the applied normal stress.
△ Less
Submitted 22 December, 2013;
originally announced December 2013.
-
Influence of asperities on fluid and thermal flow in a fracture: a coupled Lattice Boltzmann study
Authors:
Amélie Neuville,
Eirik Grude Flekkøy,
Renaud Toussaint
Abstract:
The characteristics of the hydro-thermal flow which occurs when a cold fluid is injected into a hot fractured bedrock depend on the morphology of the fracture. We consider a sharp triangular asperity, invariant in one direction, perturbing an otherwise flat fracture. We investigate its influence on the macroscopic hydraulic transmissivity and heat transfer efficiency, at fixed low Reynolds number.…
▽ More
The characteristics of the hydro-thermal flow which occurs when a cold fluid is injected into a hot fractured bedrock depend on the morphology of the fracture. We consider a sharp triangular asperity, invariant in one direction, perturbing an otherwise flat fracture. We investigate its influence on the macroscopic hydraulic transmissivity and heat transfer efficiency, at fixed low Reynolds number. In this study, numerical simulations are done with a coupled lattice Boltzmann method that solves both the complete Navier-Stokes and advection-diffusion equations in three dimensions. The results are compared with those obtained under lubrication approximations which rely on many hypotheses and neglect the three-dimensional (3D) effects. The lubrication results are obtained by analytically solving the Stokes equation and a two-dimensional (integrated over the thickness) advection-diffusion equation. We use a lattice Boltzmann method with a double distribution (for mass and energy transport) on hypercubic and cubic lattices. Beyond some critical slope for the boundaries, the velocity profile is observed to be far from a quadratic profile in the vicinity of the sharp asperity: the fluid within the triangular asperity is quasi-static. We find that taking account of both the 3D effects and the cooling of the rock, are important for the thermal exchange. Neglecting these effects with lubrication approximations results in overestimating the heat exchange efficiency. The evolution of the temperature over time, towards steady state, also shows complex behavior: some sites alternately reheat and cool down several times, making it difficult to forecast the extracted heat.
△ Less
Submitted 4 July, 2013;
originally announced July 2013.
-
History-independence of steady-state in simultaneous two-phase flow through porous media
Authors:
Marion Erpelding,
Santanu Sinha,
Ken Tore Tallakstad,
Alex Hansen,
Eirik Grude Flekkøy,
Knut Jørgen Måløy
Abstract:
It is well known that the transient behavior during drainage or imbibition in multiphase flow in porous media strongly depends on the history and initial condition of the system. However, when the steady-state regime is reached and both drainage and imbibition take place at the pore level, the influence of the evolution history and initial preparation is an open question. Here, we present an exten…
▽ More
It is well known that the transient behavior during drainage or imbibition in multiphase flow in porous media strongly depends on the history and initial condition of the system. However, when the steady-state regime is reached and both drainage and imbibition take place at the pore level, the influence of the evolution history and initial preparation is an open question. Here, we present an extensive experimental and numerical work investigating the history dependence of simultaneous steady-state two-phase flow through porous media. Our experimental system consists of a Hele-Shaw cell filled with glass beads which we model numerically by a network of disordered pores transporting two immiscible fluids. From the measurements of global pressure evolution, histogram of saturation and cluster-size distributions, we find that when both phases are flowing through the porous medium, the steady state does not depend on the initial preparation of the system or on the way it has been reached.
△ Less
Submitted 17 April, 2013;
originally announced April 2013.
-
Numerical studies of aerofractures in porous media / Estudios numericos de aerofractures en medios porosos
Authors:
Michael Niebling,
Renaud Toussaint,
Eirik Grude Flekkøy,
K. J. Måløy
Abstract:
During the hydraulically induced compaction of a granular layer fracture patterns arise. In numerical simulations we study how these patterns depend on the gas properties as well as on the properties of the porous medium. In particular the relation between the speed of fracture propagation and injection pressure is here studied in detail.
During the hydraulically induced compaction of a granular layer fracture patterns arise. In numerical simulations we study how these patterns depend on the gas properties as well as on the properties of the porous medium. In particular the relation between the speed of fracture propagation and injection pressure is here studied in detail.
△ Less
Submitted 12 September, 2012;
originally announced September 2012.
-
Family-Vicsek scaling of detachment fronts in Granular Rayleigh Taylor Instabilities during sedimenting granular/fluid flows
Authors:
Jan Ludvig Vinningland,
Renaud Toussaint,
Michael Niebling,
Eirik Grude Flekkøy,
Knut Jørgen Måløy
Abstract:
When submillimetric particles are confined in a fluid such that a compact cluster of particles lie above the clear fluid, particles will detach from the lower boundary of the cluster and form an unstable separation front giving rise to growing fingers of falling particles. We study this problem using both experiments and hybrid granular/fluid mechanics models. In the case of particles from 50 to 5…
▽ More
When submillimetric particles are confined in a fluid such that a compact cluster of particles lie above the clear fluid, particles will detach from the lower boundary of the cluster and form an unstable separation front giving rise to growing fingers of falling particles. We study this problem using both experiments and hybrid granular/fluid mechanics models. In the case of particles from 50 to 500 microns in diameter falling in air, we study the horizontal density fluctuations at early times: the amplitude of the density difference between two points at a certain horizontal distance grows as a power law of time. This happens up to a saturation corresponding to a power law of the distance. The way in which the correlation length builds up to this saturation also follows a power law of time. We show that these decompaction fronts in sedimentation problems follow a Family-Vicsek scaling, characterize the dynamic and Hurst exponent of the lateral density fluctuations, respectively z \sim 1 and ζ\sim 0.75, and show how the prefactors depend on the grain diameter. We also show from similar simulations with a more viscous and incompressible fluid, that this feature is independent of the fluid compressibility or viscosity, ranging from air to water/glycerol mixtures.
△ Less
Submitted 12 July, 2012;
originally announced July 2012.
-
Self-assembly and dynamics of magnetic holes
Authors:
Arne T. Skjeltorp,
Jorgen Akselvoll,
Kai De Lange Kistiansen,
Geir Helgesen,
Renaud Toussaint,
Eirik Grude Flekkoy,
Josef Cernak
Abstract:
Nonmagnetic particles in magnetized ferrofluids have been denoted magnetic holes and are in many ways ideal model systems to test various forms of particle self assembly and dynamics. Some case studies to be reviewed here include:
Chaining of magnetic holes
Braid theory and Zipf relation used in dynamics of magnetic microparticles
Interactions of magnetic holes in ferrofluid layers
The o…
▽ More
Nonmagnetic particles in magnetized ferrofluids have been denoted magnetic holes and are in many ways ideal model systems to test various forms of particle self assembly and dynamics. Some case studies to be reviewed here include:
Chaining of magnetic holes
Braid theory and Zipf relation used in dynamics of magnetic microparticles
Interactions of magnetic holes in ferrofluid layers
The objectives of these works have been to find simple characterizations of complex behavior of particles with dipolar interactions.
△ Less
Submitted 1 November, 2006;
originally announced November 2006.
