Showing 1–50 of 98 results for author: Ferrari, A

Kilometer-Scale Ion-Photon Entanglement with a Metastable $^{88}$Sr$^{+}$ Qubit

Authors: Mika A. Zalewski, Denton Wu, Ana Luiza Ferrari, Yuanheng Xie, Norbert M. Linke

Abstract: We demonstrate entanglement between the polarization of an infrared photon and a metastable $^{88}$Sr$^+$ ion qubit. This entanglement persists after transmitting the photon over a $2.8\:$km long commercial fiber deployed in an urban environment. Tomography of the ion-photon entangled state yields a fidelity of $0.949(4)$ within the laboratory and $0.929(5)$ after fiber transmission, not corrected… ▽ More We demonstrate entanglement between the polarization of an infrared photon and a metastable $^{88}$Sr$^+$ ion qubit. This entanglement persists after transmitting the photon over a $2.8\:$km long commercial fiber deployed in an urban environment. Tomography of the ion-photon entangled state yields a fidelity of $0.949(4)$ within the laboratory and $0.929(5)$ after fiber transmission, not corrected for readout errors. Our results establish the Strontium ion as a promising candidate for metropolitan-scale quantum networking based on an atomic transition at $1092\:$nm, a wavelength compatible with existing telecom fiber infrastructure. △ Less

Submitted 12 June, 2025; originally announced June 2025.

The 2D Materials Roadmap

Authors: Wencai Ren, Peter Bøggild, Joan Redwing, Kostya Novoselov, Luzhao Sun, Yue Qi, Kaicheng Jia, Zhongfan Liu, Oliver Burton, Jack Alexander-Webber, Stephan Hofmann, Yang Cao, Yu Long, Quan-Hong Yang, Dan Li, Soo Ho Choi, Ki Kang Kim, Young Hee Lee, Mian Li, Qing Huang, Yury Gogotsi, Nicholas Clark, Amy Carl, Roman Gorbachev, Thomas Olsen , et al. (48 additional authors not shown)

Abstract: Over the past two decades, 2D materials have rapidly evolved into a diverse and expanding family of material platforms. Many members of this materials class have demonstrated their potential to deliver transformative impact on fundamental research and technological applications across different fields. In this roadmap, we provide an overview of the key aspects of 2D material research and developme… ▽ More Over the past two decades, 2D materials have rapidly evolved into a diverse and expanding family of material platforms. Many members of this materials class have demonstrated their potential to deliver transformative impact on fundamental research and technological applications across different fields. In this roadmap, we provide an overview of the key aspects of 2D material research and development, spanning synthesis, properties and commercial applications. We specifically present roadmaps for high impact 2D materials, including graphene and its derivatives, transition metal dichalcogenides, MXenes as well as their heterostructures and moiré systems. The discussions are organized into thematic sections covering emerging research areas (e.g., twisted electronics, moiré nano-optoelectronics, polaritronics, quantum photonics, and neuromorphic computing), breakthrough applications in key technologies (e.g., 2D transistors, energy storage, electrocatalysis, filtration and separation, thermal management, flexible electronics, sensing, electromagnetic interference shielding, and composites) and other important topics (computational discovery of novel materials, commercialization and standardization). This roadmap focuses on the current research landscape, future challenges and scientific and technological advances required to address, with the intent to provide useful references for promoting the development of 2D materials. △ Less

Submitted 28 April, 2025; v1 submitted 28 March, 2025; originally announced March 2025.

Comments: 97 pages, to be published in 2D Materials

Raman Forbidden Layer-Breathing Modes in Layered Semiconductor Materials Activated by Phonon and Optical Cavity Effects

Authors: Miao-Ling Lin, Jiang-Bin Wu, Xue-Lu Liu, Tao Liu, Rui Mei, Heng Wu, Shan Guan, Jia-Liang Xie, Jun-Wei Luo, Lin-Wang Wang, Andrea C. Ferrari, Ping-Heng Tan

Abstract: We report Raman forbidden layer-breathing modes (LBMs) in layered semiconductor materials (LSMs). The intensity distribution of all observed LBMs depends on layer number, incident light wavelength and refractive index mismatch between LSM and underlying substrate. These results are understood by a Raman scattering theory via the proposed spatial interference model, where the naturally occurring op… ▽ More We report Raman forbidden layer-breathing modes (LBMs) in layered semiconductor materials (LSMs). The intensity distribution of all observed LBMs depends on layer number, incident light wavelength and refractive index mismatch between LSM and underlying substrate. These results are understood by a Raman scattering theory via the proposed spatial interference model, where the naturally occurring optical and phonon cavities in LSMs enable spatially coherent photon-phonon coupling mediated by the corresponding one-dimensional periodic electronic states. Our work reveals the spatial coherence of photon and phonon fields on the phonon excitation via photon/phonon cavity engineering. △ Less

Submitted 7 March, 2025; originally announced March 2025.

Comments: Please check the initial version on the website of Research Square at https://doi.org/10.21203/rs.3.rs-4156671/v1

Journal ref: Physical Review Letters 134, 096903 (2025)

A finite element-based machine learning model for hydro-mechanical analysis of swelling behavior in clay-sulfate rocks

Authors: Reza Taherdangkoo, Mostafa Mollaali, Matthias Ehrhardt, Thomas Nagel, Lyesse Laloui, Alessio Ferrari, Christoph Butscher

Abstract: The hydro-mechanical behavior of clay-sulfate rocks, especially their swelling properties, poses significant challenges in geotechnical engineering. This study presents a hybrid constrained machine learning (ML) model developed using the categorical boosting algorithm (CatBoost) tuned with a Bayesian optimization algorithm to predict and analyze the swelling behavior of these complex geological ma… ▽ More The hydro-mechanical behavior of clay-sulfate rocks, especially their swelling properties, poses significant challenges in geotechnical engineering. This study presents a hybrid constrained machine learning (ML) model developed using the categorical boosting algorithm (CatBoost) tuned with a Bayesian optimization algorithm to predict and analyze the swelling behavior of these complex geological materials. Initially, a coupled hydro-mechanical model based on the Richards' equation coupled to a deformation process with linear kinematics implemented within the finite element framework OpenGeoSys was used to simulate the observed ground heave in Staufen, Germany, caused by water inflow into the clay-sulfate bearing Triassic Grabfeld Formation. A systematic parametric analysis using Gaussian distributions of key parameters, including Young's modulus, Poisson's ratio, maximum swelling pressure, permeability, and air entry pressure, was performed to construct a synthetic database. The ML model takes time, spatial coordinates, and these parameter values as inputs, while water saturation, porosity, and vertical displacement are outputs. In addition, penalty terms were incorporated into the CatBoost objective function to enforce physically meaningful predictions. Results show that the hybrid approach effectively captures the nonlinear and dynamic interactions that govern hydro-mechanical processes. The study demonstrates the ability of the model to predict the swelling behavior of clay-sulfate rocks, providing a robust tool for risk assessment and management in affected regions. The results highlight the potential of ML-driven models to address complex geotechnical challenges. △ Less

Submitted 29 January, 2025; originally announced February 2025.

Angular dependent measurement of electron-ion recombination in liquid argon for ionization calorimetry in the ICARUS liquid argon time projection chamber

Authors: ICARUS collaboration, P. Abratenko, N. Abrego-Martinez, A. Aduszkiewic, F. Akbar, L. Aliaga Soplin, M. Artero Pons, J. Asaadi, W. F. Badgett, B. Baibussinov, B. Behera, V. Bellini, R. Benocci, J. Berger, S. Berkman, S. Bertolucci, M. Betancourt, M. Bonesini, T. Boone, B. Bottino, A. Braggiotti, D. Brailsford, S. J. Brice, V. Brio, C. Brizzolari , et al. (156 additional authors not shown)

Abstract: This paper reports on a measurement of electron-ion recombination in liquid argon in the ICARUS liquid argon time projection chamber (LArTPC). A clear dependence of recombination on the angle of the ionizing particle track relative to the drift electric field is observed. An ellipsoid modified box (EMB) model of recombination describes the data across all measured angles. These measurements are us… ▽ More This paper reports on a measurement of electron-ion recombination in liquid argon in the ICARUS liquid argon time projection chamber (LArTPC). A clear dependence of recombination on the angle of the ionizing particle track relative to the drift electric field is observed. An ellipsoid modified box (EMB) model of recombination describes the data across all measured angles. These measurements are used for the calorimetric energy scale calibration of the ICARUS TPC, which is also presented. The impact of the EMB model is studied on calorimetric particle identification, as well as muon and proton energy measurements. Accounting for the angular dependence in EMB recombination improves the accuracy and precision of these measurements. △ Less

Submitted 9 August, 2024; v1 submitted 17 July, 2024; originally announced July 2024.

Report number: FERMILAB-PUB-24-0332-PPD

Journal ref: JINST 20 P01033 (2025)

Calibration and simulation of ionization signal and electronics noise in the ICARUS liquid argon time projection chamber

Authors: ICARUS collaboration, P. Abratenko, N. Abrego-Martinez, A. Aduszkiewic, F. Akbar, L. Aliaga Soplin, M. Artero Pons, J. Asaadi, W. F. Badgett, B. Baibussinov, B. Behera, V. Bellini, R. Benocci, J. Berger, S. Berkman, S. Bertolucci, M. Betancourt, M. Bonesini, T. Boone, B. Bottino, A. Braggiotti, D. Brailsford, S. J. Brice, V. Brio, C. Brizzolari , et al. (156 additional authors not shown)

Abstract: The ICARUS liquid argon time projection chamber (LArTPC) neutrino detector has been taking physics data since 2022 as part of the Short-Baseline Neutrino (SBN) Program. This paper details the equalization of the response to charge in the ICARUS time projection chamber (TPC), as well as data-driven tuning of the simulation of ionization charge signals and electronics noise. The equalization procedu… ▽ More The ICARUS liquid argon time projection chamber (LArTPC) neutrino detector has been taking physics data since 2022 as part of the Short-Baseline Neutrino (SBN) Program. This paper details the equalization of the response to charge in the ICARUS time projection chamber (TPC), as well as data-driven tuning of the simulation of ionization charge signals and electronics noise. The equalization procedure removes non-uniformities in the ICARUS TPC response to charge in space and time. This work leverages the copious number of cosmic ray muons available to ICARUS at the surface. The ionization signal shape simulation applies a novel procedure that tunes the simulation to match what is measured in data. The end result of the equalization procedure and simulation tuning allows for a comparison of charge measurements in ICARUS between Monte Carlo simulation and data, showing good performance with minimal residual bias between the two. △ Less

Submitted 5 August, 2024; v1 submitted 16 July, 2024; originally announced July 2024.

Report number: FERMILAB-PUB-24-0330-PPD

Graphene phase modulators operating in the transparency regime

Authors: H. F. Y. Watson, A. Ruocco, M. Tiberi, J. E. Muench, O. Balci, S. M. Shinde, S. Mignuzzi, M. Pantouvaki, D. Van Thourhout, R. Sordan, A. Tomadin, M. Romagnoli, A. C. Ferrari

Abstract: Next-generation data networks need to support Tb/s rates. In-phase and quadrature (IQ) modulation combine phase and intensity information to increase the density of encoded data, reduce overall power consumption by minimising the number of channels, and increase noise tolerance. To reduce errors when decoding the received signal, intersymbol interference must be minimised. This is achieved with pu… ▽ More Next-generation data networks need to support Tb/s rates. In-phase and quadrature (IQ) modulation combine phase and intensity information to increase the density of encoded data, reduce overall power consumption by minimising the number of channels, and increase noise tolerance. To reduce errors when decoding the received signal, intersymbol interference must be minimised. This is achieved with pure phase modulation, where the phase of the optical signal is controlled without changing its intensity. Phase modulators are characterised by the voltage required to achieve a $π$ phase shift V$_π$, the device length L, and their product V$_π$L. To reduce power consumption, IQ modulators are needed with$<$1V drive voltages and compact (sub-cm) dimensions, which translate in V$_π$L$<$1Vcm. Si and LiNbO$_3$ (LN) IQ modulators do not currently meet these requirements, because V$_π$L$>$1Vcm. Here, we report a double single-layer graphene (SLG) Mach-Zehnder modulator (MZM) with pure phase modulation in the transparent regime, where optical losses are minimised and remain constant with increasing voltage. Our device has $V_πL\sim$0.3Vcm, matching state-of-the-art SLG-based MZMs and plasmonic LN MZMs, but with pure phase modulation and low insertion loss ($\sim$5dB), essential for IQ modulation. Our $V_πL$ is$\sim$5 times lower than the lowest thin-film LN MZMs, and$\sim$3 times lower than the lowest Si MZMs. This enables devices with complementary metal-oxide semiconductor compatible V$_π$L ($<$1Vcm) and smaller footprint than LN or Si MZMs, improving circuit density and reducing power consumption by one order of magnitude. △ Less

Submitted 25 December, 2023; originally announced January 2024.

Journal ref: ACS Nano 18, 30269 (2024)

A foundation model for atomistic materials chemistry

Authors: Ilyes Batatia, Philipp Benner, Yuan Chiang, Alin M. Elena, Dávid P. Kovács, Janosh Riebesell, Xavier R. Advincula, Mark Asta, Matthew Avaylon, William J. Baldwin, Fabian Berger, Noam Bernstein, Arghya Bhowmik, Samuel M. Blau, Vlad Cărare, James P. Darby, Sandip De, Flaviano Della Pia, Volker L. Deringer, Rokas Elijošius, Zakariya El-Machachi, Fabio Falcioni, Edvin Fako, Andrea C. Ferrari, Annalena Genreith-Schriever , et al. (51 additional authors not shown)

Abstract: Machine-learned force fields have transformed the atomistic modelling of materials by enabling simulations of ab initio quality on unprecedented time and length scales. However, they are currently limited by: (i) the significant computational and human effort that must go into development and validation of potentials for each particular system of interest; and (ii) a general lack of transferabilit… ▽ More Machine-learned force fields have transformed the atomistic modelling of materials by enabling simulations of ab initio quality on unprecedented time and length scales. However, they are currently limited by: (i) the significant computational and human effort that must go into development and validation of potentials for each particular system of interest; and (ii) a general lack of transferability from one chemical system to the next. Here, using the state-of-the-art MACE architecture we introduce a single general-purpose ML model, trained on a public database of 150k inorganic crystals, that is capable of running stable molecular dynamics on molecules and materials. We demonstrate the power of the MACE-MP-0 model - and its qualitative and at times quantitative accuracy - on a diverse set problems in the physical sciences, including the properties of solids, liquids, gases, chemical reactions, interfaces and even the dynamics of a small protein. The model can be applied out of the box and as a starting or "foundation model" for any atomistic system of interest and is thus a step towards democratising the revolution of ML force fields by lowering the barriers to entry. △ Less

Submitted 1 March, 2024; v1 submitted 29 December, 2023; originally announced January 2024.

Comments: 119 pages, 63 figures, 37MB PDF

Graphene-perovskite fibre photodetectors

Authors: S. Akhavan, A. Taheri Najafabadi, S. Mignuzzi, M. Abdi Jalebi, A. Ruocco, I. Paradisanos, O. Balci, Z. Andaji-Garmaroudi, I. Goykhman, L. G. Occhipinti, E. Lidorikis, S. D. Stranks, A. C. Ferrari

Abstract: The integration of optoelectronic devices, such as transistors and photodetectors (PDs), into wearables and textiles is of great interest for applications such as healthcare and physiological monitoring. These require flexible/wearable systems adaptable to body motions, thus materials conformable to non-planar surfaces, and able to maintain performance under mechanical distortions. Here, we prepar… ▽ More The integration of optoelectronic devices, such as transistors and photodetectors (PDs), into wearables and textiles is of great interest for applications such as healthcare and physiological monitoring. These require flexible/wearable systems adaptable to body motions, thus materials conformable to non-planar surfaces, and able to maintain performance under mechanical distortions. Here, we prepare fibre PDs combining rolled graphene layers and photoactive perovskites. Conductive fibres ($\sim$500$Ω$/cm) are made by rolling single layer graphene (SLG) around silica fibres, followed by deposition of a dielectric layer (Al$_{2}$O$_{3}$ and parylene C), another rolled SLG as channel, and perovskite as photoactive component. The resulting gate-tunable PDs have response time$\sim$5ms, with an external responsivity$\sim$22kA/W at 488nm for 1V bias. The external responsivity is two orders of magnitude higher and the response time one order of magnitude faster than state-of-the-art wearable fibre based PDs. Under bending at 4mm radius, up to$\sim$80\% photocurrent is maintained. Washability tests show$\sim$72\% of initial photocurrent after 30 cycles, promising for wearable applications. △ Less

Submitted 19 November, 2023; originally announced November 2023.

Journal ref: Adv. Mater. 36, 2400703 (2024)

Towards a Muon Collider

Authors: Carlotta Accettura, Dean Adams, Rohit Agarwal, Claudia Ahdida, Chiara Aimè, Nicola Amapane, David Amorim, Paolo Andreetto, Fabio Anulli, Robert Appleby, Artur Apresyan, Aram Apyan, Sergey Arsenyev, Pouya Asadi, Mohammed Attia Mahmoud, Aleksandr Azatov, John Back, Lorenzo Balconi, Laura Bandiera, Roger Barlow, Nazar Bartosik, Emanuela Barzi, Fabian Batsch, Matteo Bauce, J. Scott Berg , et al. (272 additional authors not shown)

Abstract: A muon collider would enable the big jump ahead in energy reach that is needed for a fruitful exploration of fundamental interactions. The challenges of producing muon collisions at high luminosity and 10 TeV centre of mass energy are being investigated by the recently-formed International Muon Collider Collaboration. This Review summarises the status and the recent advances on muon colliders desi… ▽ More A muon collider would enable the big jump ahead in energy reach that is needed for a fruitful exploration of fundamental interactions. The challenges of producing muon collisions at high luminosity and 10 TeV centre of mass energy are being investigated by the recently-formed International Muon Collider Collaboration. This Review summarises the status and the recent advances on muon colliders design, physics and detector studies. The aim is to provide a global perspective of the field and to outline directions for future work. △ Less

Submitted 27 November, 2023; v1 submitted 15 March, 2023; originally announced March 2023.

Comments: 118 pages, 103 figures

Modelling Surface Segregation in Compositionally Complex Alloys with Ab-Initio Accuracy

Authors: Alberto Ferrari, Vadim Sotskov, Alexander V. Shapeev, Fritz Körmann

Abstract: Compositionally complex alloys or concentrated solid solutions are the latest frontier in catalyst design, but mixing different elements in one catalyst may result in surface segregation. Atomistic simulations can predict segregation patterns, but standard approaches based on mean-field models, cluster expansion, or classical interatomic potentials are often limited for the description of multicom… ▽ More Compositionally complex alloys or concentrated solid solutions are the latest frontier in catalyst design, but mixing different elements in one catalyst may result in surface segregation. Atomistic simulations can predict segregation patterns, but standard approaches based on mean-field models, cluster expansion, or classical interatomic potentials are often limited for the description of multicomponent alloys. We present machine learning potentials that can describe surface segregation with near DFT accuracy. The method is used to study a complex Co-Cu-Fe-Mo-Ni quinary alloy. For this alloy, an unexpected segregation of Co, which has a relatively high surface energy, is observed. We rationalize this surprising mechanism in terms of simple transition-metal chemistry. △ Less

Submitted 8 December, 2022; originally announced December 2022.

Comments: 9 pages, 5 figures, 2 tables

Ultrashort pulse generation from a graphene-coupled passively mode-locked terahertz laser

Authors: Elisa Riccardi, Valentino Pistore, Seonggil Kang, Lukas Seitner, Anna De Vetter, Christian Jirauschek, Juliette Mangeney, Lianhe Li, A. Giles Davies, Edmund H. Linfield, Andrea C. Ferrari, Sukhdeep S. Dhillon, Miriam S. Vitiello

Abstract: The generation of stable trains of ultra-short (fs-ps), terahertz (THz)-frequency radiation pulses, with large instantaneous intensities, is an underpinning requirement for the investigation of light-matter interactions, for metrology and for ultra-high-speed communications. In solid-state electrically-pumped lasers, the primary route for generating short pulses is through passive mode-locking. Ho… ▽ More The generation of stable trains of ultra-short (fs-ps), terahertz (THz)-frequency radiation pulses, with large instantaneous intensities, is an underpinning requirement for the investigation of light-matter interactions, for metrology and for ultra-high-speed communications. In solid-state electrically-pumped lasers, the primary route for generating short pulses is through passive mode-locking. However, this has not yet been achieved in the THz range, defining one of the longest standing goals over the last two decades. In fact, the realization of passive mode-locking has long been assumed to be inherently hindered by the fast recovery times associated with the intersubband gain of THz lasers. Here, we demonstrate a self-starting miniaturized ultra-short pulse THz laser, exploiting an original device architecture that includes the surface patterning of multilayer-graphene saturable absorbers distributed along the entire cavity of a double-metal semiconductor 2.30-3.55 THz wire laser. Self-starting pulsed emission with 4.0-ps-long pulses in a compact, all-electronic, all-passive and inexpensive configuration is demonstrated. △ Less

Submitted 21 September, 2022; originally announced September 2022.

Comments: 20 pages, 4 figures

Terahertz photodetection in scalable single-layer-graphene and hexagonal boron nitride heterostructures

Authors: M. Asgari, L. Viti, O. Balci, S. M. Shinde, J. Zhang, H. Ramezani, S. Sharma, A. Meersha, G. Menichetti, C. McAleese, B. Conran, X. Wang, A. Tomadin, A. C. Ferrari, M. S. Vitiello

Abstract: The unique optoelectronic properties of single layer graphene (SLG) are ideal for the development of photonic devices across a broad range of frequencies, from X-rays to microwaves. In the terahertz (THz) range (0.1-10 THz frequency) this has led to the development of optical modulators, non-linear sources, and photodetectors, with state-of-the-art performances. A key challenge is the integration… ▽ More The unique optoelectronic properties of single layer graphene (SLG) are ideal for the development of photonic devices across a broad range of frequencies, from X-rays to microwaves. In the terahertz (THz) range (0.1-10 THz frequency) this has led to the development of optical modulators, non-linear sources, and photodetectors, with state-of-the-art performances. A key challenge is the integration of SLG-based active elements with pre-existing technological platforms in a scalable way, while maintaining performance level unperturbed. Here, we report on the development of room temperature THz detection in large-area SLG, grown by chemical vapor deposition (CVD), integrated in antenna-coupled field effect transistors. We selectively activate the photo-thermoelectric detection dynamics, and we employ different dielectric configurations on SLG on Al2O3 with and without large-area CVD hBN capping to investigate their effect on SLG thermoelectric properties underpinning photodetection. With these scalable architectures, response times ~5ns and noise equivalent powers ~1nWHz-1/2 are achieved under zero-bias operation. This shows the feasibility of scalable, large-area, layered materials heterostructures for THz detection. △ Less

Submitted 28 June, 2022; originally announced June 2022.

Comments: 15 pages, 4 Figures. The following article has been accepted by Applied Physics Letters. After it is published, it will be found at the link https://doi.org/10.1063/5.0097726

Compact Spectroscopy of keV to MeV X-rays from a Laser Wakefield Accelerator

Authors: A. Hannasch, A. Laso Garcia, M. LaBerge, R. Zgadzaj, A. Koehler, J. P. Couperus Cabadag, O. Zarini, T. Kurz, A. Ferrari, M. Molodtsova, L. Naumann, T. Cowan, U. Schramm, A. Irman, M. C. Downer

Abstract: We reconstruct spectra of secondary X-rays from a tunable 250-350 MeV laser wakefield electron accelerator from single-shot X-ray depth-energy measurements in a compact (7.5 $\times$ 7.5 $\times$ 15 cm), modular X-ray calorimeter made of alternating layers of absorbing materials and imaging plates. X-rays range from few-keV betatron to few-MeV inverse Compton to >100 MeV bremsstrahlung emission, a… ▽ More We reconstruct spectra of secondary X-rays from a tunable 250-350 MeV laser wakefield electron accelerator from single-shot X-ray depth-energy measurements in a compact (7.5 $\times$ 7.5 $\times$ 15 cm), modular X-ray calorimeter made of alternating layers of absorbing materials and imaging plates. X-rays range from few-keV betatron to few-MeV inverse Compton to >100 MeV bremsstrahlung emission, and are characterized both individually and in mixtures. Geant4 simulations of energy deposition of single-energy X-rays in the stack generate an energy-vs-depth response matrix for a given stack configuration. An iterative reconstruction algorithm based on analytic models of betatron, inverse Compton and bremsstrahlung photon energy distributions then unfolds X-ray spectra, typically within a minute. We discuss uncertainties, limitations and extensions of both measurement and reconstruction methods. △ Less

Submitted 1 March, 2021; originally announced March 2021.

Journal ref: Sci Rep 11, 14368 (2021)

Imaging neutron capture cross sections: i-TED proof-of-concept and future prospects based on Machine-Learning techniques

Authors: V. Babiano-Suárez, J. Lerendegui-Marco, J. Balibrea-Correa, L. Caballero, D. Calvo, I. Ladarescu, C. Domingo-Pardo, F. Calviño, A. Casanovas, A. Tarifeño-Saldivia, V. Alcayne, C. Guerrero, M. A. Millán-Callado, M. T. Rodríguez González, M. Barbagallo, O. Aberle, S. Amaducci, J. Andrzejewski, L. Audouin, M. Bacak, S. Bennett, E. Berthoumieux, J. Billowes, D. Bosnar, A. Brown , et al. (110 additional authors not shown)

Abstract: i-TED is an innovative detection system which exploits Compton imaging techniques to achieve a superior signal-to-background ratio in ($n,γ$) cross-section measurements using time-of-flight technique. This work presents the first experimental validation of the i-TED apparatus for high-resolution time-of-flight experiments and demonstrates for the first time the concept proposed for background reje… ▽ More i-TED is an innovative detection system which exploits Compton imaging techniques to achieve a superior signal-to-background ratio in ($n,γ$) cross-section measurements using time-of-flight technique. This work presents the first experimental validation of the i-TED apparatus for high-resolution time-of-flight experiments and demonstrates for the first time the concept proposed for background rejection. To this aim both $^{197}$Au($n,γ$) and $^{56}$Fe($n, γ$) reactions were measured at CERN n\_TOF using an i-TED demonstrator based on only three position-sensitive detectors. Two \cds detectors were also used to benchmark the performance of i-TED. The i-TED prototype built for this study shows a factor of $\sim$3 higher detection sensitivity than state-of-the-art \cds detectors in the $\sim$10~keV neutron energy range of astrophysical interest. This paper explores also the perspectives of further enhancement in performance attainable with the final i-TED array consisting of twenty position-sensitive detectors and new analysis methodologies based on Machine-Learning techniques. △ Less

Submitted 18 December, 2020; originally announced December 2020.

Comments: 16 pages, 16 figures

Wafer-scale integration of graphene-based photonic devices

Authors: Marco A. Giambra, Vaidotas Mišeikis, Sergio Pezzini, Simone Marconi, Alberto Montanaro, Filippo Fabbri, Vito Sorianello, Andrea C. Ferrari, Camilla Coletti, Marco Romagnoli

Abstract: Graphene and related materials can lead to disruptive advances in next generation photonics and optoelectronics. The challenge is to devise growth, transfer and fabrication protocols providing high (>5,000 cm2 V-1 s-1) mobility devices with reliable performance at the wafer scale. Here, we present a flow for the integration of graphene in photonics circuits. This relies on chemical vapour depositi… ▽ More Graphene and related materials can lead to disruptive advances in next generation photonics and optoelectronics. The challenge is to devise growth, transfer and fabrication protocols providing high (>5,000 cm2 V-1 s-1) mobility devices with reliable performance at the wafer scale. Here, we present a flow for the integration of graphene in photonics circuits. This relies on chemical vapour deposition (CVD) of single layer graphene (SLG) matrices comprising up to ~12000 individual single crystals (SCs), grown to match the geometrical configuration of the devices in the photonic circuit. This is followed by a transfer approach which guarantees coverage over ~80% of the device area, and integrity for up to 150 mm wafers, with room temperature mobility ~5000 cm2 V-1 s-1. We use this process flow to demonstrate double SLG electro-absorption modulators with modulation efficiency ~0.25, 0.45, 0.75, 1 dB V-1 for device lengths ~30, 60, 90, 120 μm. The data rate is up to 20 Gbps. Encapsulation with single-layer hBN is used to protected SLG during plasma-enhanced CVD of Si3N4, ensuring reproducible device performance. Our full process flow (from growth to device fabrication) enables the commercial implementation of graphene-based photonic devices. △ Less

Submitted 9 February, 2021; v1 submitted 18 November, 2020; originally announced December 2020.

Comments: 30 pages, 9 Figures

Tunable, grating-gated, graphene-on-polyimide terahertz modulators

Authors: Alessandra Di Gaspare, Eva A. A. Pogna, Luca Salemi, Osman Balci, Alisson R. Cadore, Sachin M. Shinde, Lianhe Li, Cinzia di Franco, A. Giles Davies, Edmund Linfield, Andrea C. Ferrari, Gaetano Scamarcio, Miriam S. Vitiello

Abstract: We present an electrically switchable graphene terahertz (THz) modulator with a tunable-by-design optical bandwidth and we exploit it to compensate the cavity dispersion of a quantum cascade laser (QCL). Electrostatic gating is achieved by a metal-grating used as a gate electrode, with an HfO2/AlOx gate dielectric on top. This is patterned on a polyimide layer, which acts as a quarter wave resonan… ▽ More We present an electrically switchable graphene terahertz (THz) modulator with a tunable-by-design optical bandwidth and we exploit it to compensate the cavity dispersion of a quantum cascade laser (QCL). Electrostatic gating is achieved by a metal-grating used as a gate electrode, with an HfO2/AlOx gate dielectric on top. This is patterned on a polyimide layer, which acts as a quarter wave resonance cavity, coupled with an Au reflector underneath. We get 90% modulation depth of the intensity, combined with a 20 kHz electrical bandwidth in the 1.9 _ 2.7 THz range. We then integrate our modulator with a multimode THz QCL. By adjusting the modulator operational bandwidth, we demonstrate that the graphene modulator can partially compensates the QCL cavity dispersion, resulting in an integrated laser behaving as a stable frequency comb over 35% of the laser operational range, with 98 equidistant optical modes and with a spectral coverage of ~ 1.2 THz. This has significant potential for frontier applications in the terahertz, as tunable transformation-optics devices, active photonic components, adaptive and quantum optics, and as a metrological tool for spectroscopy at THz frequencies. △ Less

Submitted 22 November, 2020; originally announced December 2020.

Comments: 22 pages, 6 figures

Tunable broadband light emission from graphene

Authors: Lavinia Ghirardini, Eva A. A. Pogna, Giancarlo Soavi, Andrea Tomadin, Paolo Biagioni, Stefano Dal Conte, Domenico De Fazio, T. Taniguchi, K. Watanabe, Lamberto Duò, Marco Finazzi, Marco Polini, Andrea C. Ferrari, Giulio Cerullo, Michele Celebrano

Abstract: Graphene is an ideal material for integrated nonlinear optics thanks to its strong light-matter interaction and large nonlinear optical susceptibility. Graphene has been used in optical modulators, saturable absorbers, nonlinear frequency converters, and broadband light emitters. For the latter application, a key requirement is the ability to control and engineer the emission wavelength and bandwi… ▽ More Graphene is an ideal material for integrated nonlinear optics thanks to its strong light-matter interaction and large nonlinear optical susceptibility. Graphene has been used in optical modulators, saturable absorbers, nonlinear frequency converters, and broadband light emitters. For the latter application, a key requirement is the ability to control and engineer the emission wavelength and bandwidth, as well as the electronic temperature of graphene. Here, we demonstrate that the emission wavelength of graphene$'$ s broadband hot carrier photoluminescence can be tuned by integration on photonic cavities, while thermal management can be achieved by out-of-plane heat transfer to hexagonal boron nitride. Our results pave the way to graphene-based ultrafast broadband light emitters with tunable emission. △ Less

Submitted 3 December, 2020; originally announced December 2020.

Comments: 22 pages, 5 Figures

Terahertz frequency combs exploiting an on-chip solution processed graphene-quantum cascade laser coupled-cavity architecture

Authors: F. P. Mezzapesa, K. Garrasi, J. Schmidt, L. Salemi, V. Pistore, L. Li, A. G. Davies, E. H. Linfield, M. Riesch, C. Jirauschek, T. Carey, F. Torrisi, A. C. Ferrari, M. S. Vitiello

Abstract: The ability to engineer quantum-cascade-lasers (QCLs) with ultrabroad gain spectra and with a full compensation of the group velocity dispersion, at Terahertz (THz) frequencies, is a fundamental need for devising monolithic and miniaturized optical frequency-comb-synthesizers (FCS) in the far-infrared. In a THz QCL four-wave mixing, driven by the intrinsic third-order susceptibility of the intersu… ▽ More The ability to engineer quantum-cascade-lasers (QCLs) with ultrabroad gain spectra and with a full compensation of the group velocity dispersion, at Terahertz (THz) frequencies, is a fundamental need for devising monolithic and miniaturized optical frequency-comb-synthesizers (FCS) in the far-infrared. In a THz QCL four-wave mixing, driven by the intrinsic third-order susceptibility of the intersubband gain medium, self-lock the optical modes in phase, allowing stable comb operation, albeit over a restricted dynamic range (~ 20% of the laser operational range). Here, we engineer miniaturized THz FCSs comprising a heterogeneous THz QCL integrated with a tightly-coupled on-chip solution-processed graphene saturable-absorber reflector that preserves phase-coherence between lasing modes even when four-wave mixing no longer provides dispersion compensation. This enables a high-power (8 mW) FCS with over 90 optical modes to be demonstrated, over more than 55% of the laser operational range. Furthermore, stable injection-locking is showed, paving the way to impact a number of key applications, including high-precision tuneable broadband-spectroscopy and quantum-metrology. △ Less

Submitted 23 November, 2020; originally announced November 2020.

Comments: 31 pages, 11 figures, to be published in ACS Photonics

Wide field of view crystal orientation mapping of layered materials

Authors: A. Orekhov, D. Jannis, N. Gauquelin, G. Guzzinati, A. Nalin Mehta, S. Psilodimitrakopoulos, L. Mouchliadis, P. K. Sahoo, I. Paradisanos, A. C. Ferrari, G. Kioseoglou, E. Stratakis, J. Verbeeck

Abstract: Layered materials (LMs) are at the centre of an ever increasing research effort due to their potential use in a variety of applications. The presence of imperfections, such as bi- or multilayer areas, holes, grain boundaries, isotropic and anisotropic deformations, etc. are detrimental for most (opto)electronic applications. Here, we present a set-up able to transform a conventional scanning elect… ▽ More Layered materials (LMs) are at the centre of an ever increasing research effort due to their potential use in a variety of applications. The presence of imperfections, such as bi- or multilayer areas, holes, grain boundaries, isotropic and anisotropic deformations, etc. are detrimental for most (opto)electronic applications. Here, we present a set-up able to transform a conventional scanning electron microscope into a tool for structural analysis of a wide range of LMs. An hybrid pixel electron detector below the sample makes it possible to record two dimensional (2d) diffraction patterns for every probe position on the sample surface (2d), in transmission mode, thus performing a 2d+2d=4d STEM (scanning transmission electron microscopy) analysis. This offers a field of view up to 2 mm2, while providing spatial resolution in the nm range, enabling the collection of statistical data on grain size, relative orientation angle, bilayer stacking, strain, etc. which can be mined through automated open-source data analysis software. We demonstrate this approach by analyzing a variety of LMs, such as mono- and multi-layer graphene, graphene oxide and MoS2, showing the ability of this method to characterize them in the tens of nm to mm scale. This wide field of view range and the resulting statistical information are key for large scale applications of LMs. △ Less

Submitted 3 November, 2020; originally announced November 2020.

Comments: A. Orekhov and D. Jannis contributed equally to this work. J. Verbeeck is corresponding author

Low-loss integrated nanophotonic circuits with layered semiconductor materials

Authors: Tianyi Liu, Ioannis Paradisanos, Jijun He, Alisson R. Cadore, Junqiu Liu, Mikhail Churaev, Rui Ning Wang, Arslan S. Raja, Clément Javerzac-Galy, Philippe Rölli, Domenico De Fazio, Barbara L. T. Rosa, Sefaattin Tongay, Giancarlo Soavi, Andrea C. Ferrari, Tobias J. Kippenberg

Abstract: Monolayer transition metal dichalcogenides with direct bandgaps are emerging candidates for microelectronics, nano-photonics, and optoelectronics. Transferred onto photonic integrated circuits (PICs), these semiconductor materials have enabled new classes of light-emitting diodes, modulators and photodetectors, that could be amenable to wafer-scale manufacturing. For integrated photonic devices, t… ▽ More Monolayer transition metal dichalcogenides with direct bandgaps are emerging candidates for microelectronics, nano-photonics, and optoelectronics. Transferred onto photonic integrated circuits (PICs), these semiconductor materials have enabled new classes of light-emitting diodes, modulators and photodetectors, that could be amenable to wafer-scale manufacturing. For integrated photonic devices, the optical losses of the PICs are critical. In contrast to silicon, silicon nitride (Si3N4) has emerged as a low-loss integrated platform with a wide transparency window from ultraviolet to mid-infrared and absence of two-photon absorption at telecommunication bands. Moreover, it is suitable for nonlinear integrated photonics due to its high Kerr nonlinearity and high-power handing capability. These features of Si3N4 are intrinsically beneficial for nanophotonics and optoelectronics applications. Here we report a low-loss integrated platform incorporating monolayer molybdenum ditelluride (1L-MoTe2) with Si3N4 photonic microresonators. We show that, with the 1L-MoTe2, microresonator quality factors exceeding 3 million in the telecommunication O-band to E-band are maintained. We further investigate the change of microresonator dispersion and resonance shift due to the presence of 1L-MoTe2, and extrapolate the optical loss introduced by 1L-MoTe2 in the telecommunication bands, out of the excitonic transition region. Our work presents a key step for low-loss, hybrid PICs with layered semiconductors without using heterogeneous wafer bonding. △ Less

Submitted 15 October, 2020; v1 submitted 12 October, 2020; originally announced October 2020.

Journal ref: Nano Letters 21, 2709 - 2718 (2021)

Ultrafast, Zero-Bias, Graphene Photodetectors with Polymeric Gate Dielectric on Passive Photonic Waveguides

Authors: Vaidotas Mišeikis, Simone Marconi, Marco A. Giambra, Alberto Montanaro, Leonardo Martini, Filippo Fabbri, Sergio Pezzini, Giulia Piccinini, Stiven Forti, Bernat Terrés, Ilya Goykhman, Louiza Hamidouche, Pierre Legagneux, Vito Sorianello, Andrea C. Ferrari, Frank H. L. Koppens, Marco Romagnoli, Camilla Coletti

Abstract: We report compact, scalable, high-performance, waveguide integrated graphene-based photodetectors (GPDs) for telecom and datacom applications, not affected by dark current. To exploit the photothermoelectric (PTE) effect, our devices rely on a graphene-polymer-graphene stack with static top split gates. The polymeric dielectric, poly(vinyl alcohol) (PVA), allows us to preserve graphene quality and… ▽ More We report compact, scalable, high-performance, waveguide integrated graphene-based photodetectors (GPDs) for telecom and datacom applications, not affected by dark current. To exploit the photothermoelectric (PTE) effect, our devices rely on a graphene-polymer-graphene stack with static top split gates. The polymeric dielectric, poly(vinyl alcohol) (PVA), allows us to preserve graphene quality and to generate a controllable p-n junction. Both graphene layers are fabricated using aligned single-crystal graphene arrays grown by chemical vapor deposition. The use of PVA yields a low charge inhomogeneity 8 x 10$^{10}$ $cm^{-2}$ at the charge neutrality point, and a large Seebeck coefficient 140 $μ$V K$^{-1}$, enhancing the PTE effect. Our devices are the fastest GPDs operating with zero dark current, showing a flat frequency response up to 67 GHz without roll-off. This performance is achieved on a passive, low-cost, photonic platform, and does not rely on nanoscale plasmonic structures. This, combined with scalability and ease of integration, makes our GPDs a promising building block for next-generation optical communication devices. △ Less

Submitted 11 September, 2020; originally announced September 2020.

Comments: 15 pages, 11 figures. Published under ACS AuthorChoice license

Journal ref: ACS Nano 14, 11190 (2020)

High-responsivity graphene photodetectors integrated on silicon microring resonators

Authors: Simone Schuler, Jakob E. Muench, Alfonso Ruocco, Osman Balci, Dries van Thourhout, Vito Sorianello, Marco Romagnoli, Kenji Watanabe, Takashi Taniguchi, Ilya Goykhman, Andrea C. Ferrari, Thomas Mueller

Abstract: Graphene integrated photonics provides several advantages over conventional Si photonics. Single layer graphene (SLG) enables fast, broadband, and energy-efficient electro-optic modulators, optical switches and photodetectors (GPDs), and is compatible with any optical waveguide. The last major barrier to SLG-based optical receivers lies in the low responsivity - electrical output per optical input… ▽ More Graphene integrated photonics provides several advantages over conventional Si photonics. Single layer graphene (SLG) enables fast, broadband, and energy-efficient electro-optic modulators, optical switches and photodetectors (GPDs), and is compatible with any optical waveguide. The last major barrier to SLG-based optical receivers lies in the low responsivity - electrical output per optical input - of GPDs compared to conventional PDs. Here we overcome this shortfall by integrating a photo-thermoelectric GPD with a Si microring resonator. Under critical coupling, we achieve $>$90% light absorption in a $\sim$6 $μ$m SLG channel along the Si waveguide. Exploiting the cavity-enhanced light-matter interaction, causing carriers in SLG to reach $\sim$400 K for an input power of $\sim$0.6 mW, we get a voltage responsivity $\sim$90 V/W, demonstrating the feasibility of our approach. Our device is capable of detecting data rates up to 20 Gbit/s, with a receiver sensitivity enabling it to operate at a 10$^{-9}$ bit-error rate, on par with mature semiconductor technology. The natural generation of a voltage rather than a current, removes the need for transimpedance amplification, with a reduction of the energy-per-bit cost and foot-print, when compared to a traditional semiconductor-based receiver. △ Less

Submitted 6 July, 2020; originally announced July 2020.

Comments: 11 pages, 5 figures

Thermoelectric graphene photodetectors with sub-nanosecond response times at Terahertz frequencies

Authors: Leonardo Viti, Alisson R. Cadore, Xinxin Yang, Andrei Vorobiev, Jakob E. Muench, Kenji Watanabe, Takashi Taniguchi, Jan Stake, Andrea C. Ferrari, Miriam S. Vitiello

Abstract: Ultrafast and sensitive (noise equivalent power <1 nWHz-1/2) light-detection in the Terahertz (THz) frequency range (0.1-10 THz) and at room-temperature is key for applications such as time-resolved THz spectroscopy of gases, complex molecules and cold samples, imaging, metrology, ultra-high-speed data communications, coherent control of quantum systems, quantum optics and for capturing snapshots… ▽ More Ultrafast and sensitive (noise equivalent power <1 nWHz-1/2) light-detection in the Terahertz (THz) frequency range (0.1-10 THz) and at room-temperature is key for applications such as time-resolved THz spectroscopy of gases, complex molecules and cold samples, imaging, metrology, ultra-high-speed data communications, coherent control of quantum systems, quantum optics and for capturing snapshots of ultrafast dynamics, in materials and devices, at the nanoscale. Here, we report room-temperature THz nano-receivers exploiting antenna-coupled graphene field effect transistors integrated with lithographically-patterned high-bandwidth (~100 GHz) chips, operating with a combination of high speed (hundreds ps response time) and high sensitivity (noise equivalent power <120 pWHz-1/2) at 3.4 THz. Remarkably, this is achieved with various antenna and transistor architectures (single-gate, dual-gate), whose operation frequency can be extended over the whole 0.1-10 THz range, thus paving the way for the design of ultrafast graphene arrays in the far infrared, opening concrete perspective for targeting the aforementioned applications. △ Less

Submitted 24 June, 2020; v1 submitted 18 June, 2020; originally announced June 2020.

Comments: This is the unedited authors' version of the article accepted for publication in Nanophotonics 2020 (Online ISSN: 2192-8614)

Group testing with nested pools

Authors: Inés Armendáriz, Pablo A. Ferrari, Daniel Fraiman, José M. Martínez, Silvina Ponce Dawson

Abstract: In order to identify the infected individuals of a population, their samples are divided in equally sized groups called pools and a single laboratory test is applied to each pool. Individuals whose samples belong to pools that test negative are declared healthy, while each pool that tests positive is divided into smaller, equally sized pools which are tested in the next stage. In the $(k+1)$-th st… ▽ More In order to identify the infected individuals of a population, their samples are divided in equally sized groups called pools and a single laboratory test is applied to each pool. Individuals whose samples belong to pools that test negative are declared healthy, while each pool that tests positive is divided into smaller, equally sized pools which are tested in the next stage. In the $(k+1)$-th stage all remaining samples are tested. If $p<1-3^{-1/3}$, we minimize the expected number of tests per individual as a function of the number $k+1$ of stages, and of the pool sizes in the first $k$ stages. We show that for each $p\in (0, 1-3^{-1/3})$ the optimal choice is one of four possible schemes, which are explicitly described. We conjecture that for each $p$, the optimal choice is one of the two sequences of pool sizes $(3^k\text{ or }3^{k-1}4,3^{k-1},\dots,3^2,3 )$, with a precise description of the range of $p$'s where each is optimal. The conjecture is supported by overwhelming numerical evidence for $p>2^{-51}$. We also show that the cost of the best among the schemes $(3^k,\dots,3)$ is of order $O\big(p\log(1/p)\big)$, comparable to the information theoretical lower bound $p\log_2(1/p)+(1-p)\log_2(1/(1-p))$, the entropy of a Bernoulli$(p)$ random variable. △ Less

Submitted 4 October, 2021; v1 submitted 27 May, 2020; originally announced May 2020.

Comments: 31 pages, 2 figures

MSC Class: 62.P.10

HBN-encapsulated, graphene-based room-temperature terahertz receivers with high speed and low noise

Authors: Leonardo Viti, David G. Purdie, Antonio Lombardo, Andrea C. Ferrari, Miriam S. Vitiello

Abstract: Uncooled Terahertz (THz) photodetectors (PDs) showing fast (ps) response and high sensitivity (noise equivalent power (NEP) < $nWHz^{-1/2}$) over a broad (0.5THz-10THz) frequency range are needed for applications in high-resolution spectroscopy (relative accuracy ~ $10^{-11}$), metrology, quantum information, security, imaging, optical communications. However, present THz receivers cannot provide… ▽ More Uncooled Terahertz (THz) photodetectors (PDs) showing fast (ps) response and high sensitivity (noise equivalent power (NEP) < $nWHz^{-1/2}$) over a broad (0.5THz-10THz) frequency range are needed for applications in high-resolution spectroscopy (relative accuracy ~ $10^{-11}$), metrology, quantum information, security, imaging, optical communications. However, present THz receivers cannot provide the required balance between sensitivity, speed, operation temperature and frequency range. Here, we demonstrate an uncooled THz PD combining the low (~2000 $k_{B}μm^{-2}$) electronic specific heat of high mobility (> 50000 $cm^{2}V^{-1}s^{-1}$) hBN-encapsulated graphene with the asymmetric field-enhancement produced by a bow-tie antenna resonating at 3 THz. This produces a strong photo-thermoelectric conversion, which simultaneously leads to a combination of high sensitivity (NEP $\leq$ 160 $pWHz^{-1/2}$), fast response time ($\leq 3.3 ns$) and a four orders of magnitude dynamic range, making our devices the fastest, broadband, low noise, room temperature THz PD to date. △ Less

Submitted 21 April, 2020; originally announced April 2020.

Comments: This is the unedited authors' version of the submitted article, published in its final form at http://dx.doi.org/10.1021/acs.nanolett.9b05207 16 Pages, 4 Figures

Measuring Changes in the Atmospheric Neutrino Rate Over Gigayear Timescales

Authors: Johnathon R. Jordan, Sebastian Baum, Patrick Stengel, Alfredo Ferrari, Maria Cristina Morone, Paola Sala, Joshua Spitz

Abstract: Measuring the cosmic ray flux over timescales comparable to the age of the solar system, $\sim 4.5\,$Gyr, could provide a new window on the history of the Earth, the solar system, and even our galaxy. We present a technique to indirectly measure the rate of cosmic rays as a function of time using the imprints of atmospheric neutrinos in paleo-detectors, natural minerals which record damage tracks… ▽ More Measuring the cosmic ray flux over timescales comparable to the age of the solar system, $\sim 4.5\,$Gyr, could provide a new window on the history of the Earth, the solar system, and even our galaxy. We present a technique to indirectly measure the rate of cosmic rays as a function of time using the imprints of atmospheric neutrinos in paleo-detectors, natural minerals which record damage tracks from nuclear recoils. Minerals commonly found on Earth are $\lesssim 1\,$Gyr old, providing the ability to look back across cosmic ray history on timescales of the same order as the age of the solar system. Given a collection of differently aged samples dated with reasonable accuracy, this technique is particularly well-suited to measuring historical changes in the cosmic ray flux at Earth and is broadly applicable in astrophysics and geophysics. △ Less

Submitted 30 November, 2020; v1 submitted 17 April, 2020; originally announced April 2020.

Comments: Updated to match PRL version; 6 pages, 2 figures

Journal ref: Phys. Rev. Lett. (2020) 125, 231802

Study of space charge in the ICARUS T600 detector

Authors: M. Antonello, B. Baibussinov, V. Bellini, F. Boffelli, M. Bonesini, A. Bubak, S. Centro, K. Cieslik, A. G. Cocco, A. Dabrowska, A. Dermenev, A. Falcone, C. Farnese, A. Fava, A. Ferrari, D. Gibin, S. Gninenko, A. Guglielmi, M. Haranczyk, J. Holeczek, M. Kirsanov, J. Kisiel, I. Kochanek, J. Lagoda, A. Menegolli , et al. (23 additional authors not shown)

Abstract: The accumulation of positive ions, produced by ionizing particles crossing Liquid Argon Time Projection Chambers (LAr-TPCs), may generate distortions of the electric drift field affecting the track reconstruction of the ionizing events. These effects could become relevant for large LAr-TPCs operating at surface or at shallow depth, where the detectors are exposed to a copious flux of cosmic rays.… ▽ More The accumulation of positive ions, produced by ionizing particles crossing Liquid Argon Time Projection Chambers (LAr-TPCs), may generate distortions of the electric drift field affecting the track reconstruction of the ionizing events. These effects could become relevant for large LAr-TPCs operating at surface or at shallow depth, where the detectors are exposed to a copious flux of cosmic rays. A detailed study of such possible field distortions in the ICARUS T600 LAr-TPC has been performed analyzing a sample of cosmic muon tracks recorded with one T600 module operated at surface in 2001. The maximum track distortion turns out to be of few mm in good agreement with the prediction by a numerical calculation. As a cross-check, the same analysis has been performed on a cosmic muon sample recorded during the ICARUS T600 run at the LNGS underground laboratory, where the cosmic ray flux was suppressed by a factor $\sim 10^6$ by 3400 m water equivalent shielding. No appreciable distortion has been observed, confirming that the effects measured on surface are actually due to ion space charge. △ Less

Submitted 28 May, 2020; v1 submitted 24 January, 2020; originally announced January 2020.

Comments: 16 pages, 11 figures

Strongly coupled coherent phonons in single-layer MoS$_2$

Authors: C. Trovatello, H. P. C. Miranda, A. Molina-Sánchez, R. Borrego Varillas, C. Manzoni, L. Moretti, L. Ganzer, M. Maiuri, J. Wang, D. Dumcenco, A. Kis, L. Wirtz, A. Marini, G. Soavi, A. C. Ferrari, G. Cerullo, D. Sangalli, S. Dal Conte

Abstract: We present a transient absorption setup combining broadband detection over the visible-UV range with high temporal resolution ($\sim$20fs) which is ideally suited to trigger and detect vibrational coherences in different classes of materials. We generate and detect coherent phonons (CPs) in single layer (1L) MoS$_2$, as a representative semiconducting 1L-transition metal dichalcogenide (TMD), wher… ▽ More We present a transient absorption setup combining broadband detection over the visible-UV range with high temporal resolution ($\sim$20fs) which is ideally suited to trigger and detect vibrational coherences in different classes of materials. We generate and detect coherent phonons (CPs) in single layer (1L) MoS$_2$, as a representative semiconducting 1L-transition metal dichalcogenide (TMD), where the confined dynamical interaction between excitons and phonons is unexplored. The coherent oscillatory motion of the out-of-plane $A'_{1}$ phonons, triggered by the ultrashort laser pulses, dynamically modulates the excitonic resonances on a timescale of few tens fs. We observe an enhancement by almost two orders of magnitude of the CP amplitude when detected in resonance with the C exciton peak, combined with a resonant enhancement of CP generation efficiency. Ab initio calculations of the change in 1L-MoS$_2$ band structure induced by the $A'_{1}$ phonon displacement confirm a strong coupling with the C exciton. The resonant behavior of the CP amplitude follows the same spectral profile of the calculated Raman susceptibility tensor. This demonstrates that CP excitation in 1L-MoS$_2$ can be described as a Raman-like scattering process. These results explain the CP generation process in 1L-TMDs, paving the way for coherent all-optical control of excitons in layered materials in the THz frequency range. △ Less

Submitted 29 December, 2019; originally announced December 2019.

Journal ref: ACS Nano 14, 5700 (2020)

Review and new concepts for neutron-capture measurements of astrophysical interest

Authors: C. Domingo-Pardo, V. Babiano-Suarez, J. Balibrea-Correa, L. Caballero, I. Ladarescu, J. Lerendegui-Marco, J. L. Tain, F. Calviño, A. Casanovas, A. Segarra, A. E. Tarifeño-Saldivia, C. Guerrero, M. A. Millán-Callado, J. M. Quesada, M. T. Rodríguez-González, O. Aberle, V. Alcayne, S. Amaducci, J. Andrzejewski, L. Audouin, M. Bacak, M. Barbagallo, S. Bennett, E. Berthoumieux, D. Bosnar , et al. (106 additional authors not shown)

Abstract: The idea of slow-neutron capture nucleosynthesis formulated in 1957 triggered a tremendous experimental effort in different laboratories worldwide to measure the relevant nuclear physics input quantities, namely ($n,γ$) cross sections over the stellar temperature range (from few eV up to several hundred keV) for most of the isotopes involved from Fe up to Bi. A brief historical review focused on t… ▽ More The idea of slow-neutron capture nucleosynthesis formulated in 1957 triggered a tremendous experimental effort in different laboratories worldwide to measure the relevant nuclear physics input quantities, namely ($n,γ$) cross sections over the stellar temperature range (from few eV up to several hundred keV) for most of the isotopes involved from Fe up to Bi. A brief historical review focused on total energy detectors will be presented to illustrate how, advances in instrumentation have led, over the years, to the assessment and discovery of many new aspects of $s$-process nucleosynthesis and to the progressive refinement of theoretical models of stellar evolution. A summary will be presented on current efforts to develop new detection concepts, such as the Total-Energy Detector with $γ$-ray imaging capability (i-TED). The latter is based on the simultaneous combination of Compton imaging with neutron time-of-flight (TOF) techniques, in order to achieve a superior level of sensitivity and selectivity in the measurement of stellar neutron capture rates. △ Less

Submitted 16 November, 2019; originally announced November 2019.

Comments: Nuclear Physics in Astrophysics IX - Conference Proceedings

Graphene/Polyelectrolyte Layer-by-Layer Coatings for Electromagnetic Interference Shielding

Authors: Cristina Valles, Xiao Zhang, Jianyun Cao, Fei Lin, Robert J. Young, Antonio Lombardo, Andrea C. Ferrari, Laura Burk, Rolf Mulhaupt, Ian A. Kinloch

Abstract: Electromagnetic interference (EMI) shielding coating materials with thicknesses in the microscale are required in many sectors, including communications, medical, aerospace and electronics, to isolate the electromagnetic radiation emitted from electronic equipment. We report a spray, layer-by-layer (LbL) coating approach to fabricate micron thick, highly-ordered and electrically-conductive coating… ▽ More Electromagnetic interference (EMI) shielding coating materials with thicknesses in the microscale are required in many sectors, including communications, medical, aerospace and electronics, to isolate the electromagnetic radiation emitted from electronic equipment. We report a spray, layer-by-layer (LbL) coating approach to fabricate micron thick, highly-ordered and electrically-conductive coatings with exceptional EMI shielding effectiveness (EMI SE >4830 dB/mm), through the alternating self-assembly of negatively-charged reduced graphene oxide (RGO) and a positively-charged polyelectrolyte (PEI). The microstructure and resulting electrical properties of the (PEI/RGO)n LbL structures are studied as function of increasing mass of graphene deposited per cycle (keeping the PEI content constant), number of deposited layers (n), flake diameter and type of RGO. A strong effect of the lateral flake dimensions on the electrical properties is observed, which also influences the EMI SE. A maximum EMI SE of 29 dB is obtained for a 6 um thick (PEI/RGO)10 coating with 19 vol.% loading of reduced electrochemically-exfoliated graphene oxide flakes with diameters ~3um. This SE performance exceeds those previously reported for thicker graphene papers and bulk graphene/polymer composite films with higher RGO or graphene nanoplatelets contents, which represents an important step towards the fabrication of thin and light-weight high-performance EMI shielding structures. △ Less

Submitted 25 June, 2019; originally announced June 2019.

Comments: 34 pages,7 figures

Screen-printed and spray coated graphene-based RFID transponders

Authors: K. Jaakkola, V. Ermolov, P. G. Karagiannidis, S. A. Hodge, L. Lombardi, X. Zhang, R. Grenman, H. Sandberg, A. Lombardo, A. C. Ferrari

Abstract: We report Ultra-High-Frequency (UHF, 800MHz-1GHz) Radio Frequency Identification (RFID) transponders consisting of printed dipole antennas combined with RFID microchips. These are fabricated on Kapton via screen printing and on paper via spray coating, using inks obtained via microfluidization of graphite. We introduce a hybrid antenna structure, where an Al loop (small compared to the overall siz… ▽ More We report Ultra-High-Frequency (UHF, 800MHz-1GHz) Radio Frequency Identification (RFID) transponders consisting of printed dipole antennas combined with RFID microchips. These are fabricated on Kapton via screen printing and on paper via spray coating, using inks obtained via microfluidization of graphite. We introduce a hybrid antenna structure, where an Al loop (small compared to the overall size of the antenna) is connected to a microchip with the double function of matching the impedances of antenna and microchip and avoiding bonding between exfoliated graphite and chip. The transponders have reading distance~11m at UHF RFID frequencies, larger than previously reported for graphene-based RFID and comparable with commercial transponders based on metallic antennas. △ Less

Submitted 3 March, 2019; originally announced June 2019.

Journal ref: 2d Materials 7, 015019 (2020)

Graphene-Based Integrated Photonics For Next-Generation Datacom And Telecom

Authors: M. Romagnoli, V. Sorianello, M. Midrio, F. H. L. Koppens, C. Huyghebaert, D. Neumaier, P. Galli, W. Templ, A. D'Errico, A. C. Ferrari

Abstract: Graphene is an ideal material for optoelectronic applications. Its photonic properties give several advantages and complementarities over Si photonics. For example, graphene enables both electro-absorption and electro-refraction modulation with an electro-optical index change exceeding 10$^{-3}$. It can be used for optical add-drop multiplexing with voltage control, eliminating the current dissipa… ▽ More Graphene is an ideal material for optoelectronic applications. Its photonic properties give several advantages and complementarities over Si photonics. For example, graphene enables both electro-absorption and electro-refraction modulation with an electro-optical index change exceeding 10$^{-3}$. It can be used for optical add-drop multiplexing with voltage control, eliminating the current dissipation used for the thermal detuning of microresonators, and for thermoelectric-based ultrafast optical detectors that generate a voltage without transimpedance amplifiers. Here, we present our vision for grapheme-based integrated photonics. We review graphene-based transceivers and compare them with existing technologies. Strategies for improving power consumption, manufacturability and wafer-scale integration are addressed. We outline a roadmap of the technological requirements to meet the demands of the datacom and telecom markets. We show that graphene based integrated photonics could enable ultrahigh spatial bandwidth density , low power consumption for board connectivity and connectivity between data centres, access networks and metropolitan, core, regional and long-haul optical communications. △ Less

Submitted 2 June, 2019; originally announced June 2019.

Journal ref: Nature Reviews Materials 3, 392(2018)

Graphene Overcoats for Ultra-High Storage Density Magnetic Media

Authors: N. Dwivedi, A. K. Ott, K. Sasikumar, C. Dou, R. J. Yeo, B. Narayanan, U. Sassi, D. De Fazio, G. Soavi, T. Dutta, S. K. R. S. Sankaranarayanan, A. C. Ferrari, C. S. Bhatia

Abstract: Hard disk drives (HDDs) are used as secondary storage in a number of digital electronic devices owing to low cost ($<$0.1\$/GB at 2016 prices) and large data storage capacity (10TB with a 3.5 inch HDD). Due to the exponentially increasing amount of data, there is a need to increase areal storage densities beyond$\sim$1Tb/in$^2$. This requires the thickness of carbon overcoats (COCs) to be$<… ▽ More Hard disk drives (HDDs) are used as secondary storage in a number of digital electronic devices owing to low cost ($<$0.1\$/GB at 2016 prices) and large data storage capacity (10TB with a 3.5 inch HDD). Due to the exponentially increasing amount of data, there is a need to increase areal storage densities beyond$\sim$1Tb/in$^2$. This requires the thickness of carbon overcoats (COCs) to be$<$2nm. Friction, wear, corrosion, and thermal stability are critical concerns$<$2nm, where most of the protective properties of current COCs are lost. This limits current technology and restricts COC integration with heat assisted magnetic recording technology (HAMR), since this also requires laser irradiation stability. Here we show that graphene-based overcoats can overcome all these limitations. 2-4 layers of graphene enable two-fold reduction in friction and provide better corrosion and wear than state-of-the-art COCs. A single graphene layer is enough to reduce corrosion$\sim$2.5 times. We also show that graphene can withstand HAMR conditions. Thus, graphene-based overcoats can enable ultrahigh areal density HDDs$>$10Tb/in$^2$. △ Less

Submitted 2 June, 2019; originally announced June 2019.

Journal ref: Nature Commun. 12, 2854 (2021)

Network properties of healthy and Alzheimer's brains

Authors: José C. P. Coninck, Fabiano A. S. Ferrari, Adriane S. Reis, Kelly C. Iarosz, Antonio M. Batista, Ricardo L. Viana

Abstract: Small-world structures are often used to describe structural connections in the brain. In this work, we compare the structural connection of cortical areas of a healthy brain and a brain affected by Alzheimer's disease with artificial small-world networks. Based on statistics analysis, we demonstrate that similar small-world networks can be constructed using Newman-Watts procedure. The network qua… ▽ More Small-world structures are often used to describe structural connections in the brain. In this work, we compare the structural connection of cortical areas of a healthy brain and a brain affected by Alzheimer's disease with artificial small-world networks. Based on statistics analysis, we demonstrate that similar small-world networks can be constructed using Newman-Watts procedure. The network quantifiers of both structural matrices are identified inside the probabilistic valley. Despite of similarities between structural connection matrices and sampled small-world networks, increased assortativity can be found in the Alzheimer brain. Our results indicate that network quantifiers can be helpful to identify abnormalities in real structural connection matrices. △ Less

Submitted 24 May, 2019; originally announced May 2019.

Optoelectronic mixing with high frequency graphene transistors

Authors: Alberto Montanaro, Wei Wei, Domenico De Fazio, Ugo Sassi, Giancarlo Soavi, Andrea C Ferrari, Henri Happy, Pierre Legagneux, Emiliano Pallecchi

Abstract: Graphene is ideally suited for optoelectronic applications. It offers absorption at telecom wavelengths, high-frequency operation and CMOS-compatibility. We report optoelectronic mixing up to to 67GHz using a back-gated graphene field effect transistor (GFET). We also present a model to describe the resulting mixed current. These results pave the way for GETs optoelectronic mixers for mm-wave appl… ▽ More Graphene is ideally suited for optoelectronic applications. It offers absorption at telecom wavelengths, high-frequency operation and CMOS-compatibility. We report optoelectronic mixing up to to 67GHz using a back-gated graphene field effect transistor (GFET). We also present a model to describe the resulting mixed current. These results pave the way for GETs optoelectronic mixers for mm-wave applications, such as telecommunications and RADAR/LIDAR systems. △ Less

Submitted 23 May, 2019; originally announced May 2019.

Waveguide-integrated, plasmonic enhanced graphene photodetectors

Authors: J. E. Muench, A. Ruocco, M. A. Giambra, V. Miseikis, D. Zhang, J. Wang, H. F. Y. Watson, G. C. Park, S. Akhavan, V. Sorianello, M. Midrio, A. Tomadin, C. Coletti, M. Romagnoli, A. C. Ferrari, I. Goykhman

Abstract: We present a micrometer scale, on-chip integrated, plasmonic enhanced graphene photodetector (GPD) for telecom wavelengths operating at zero dark current. The GPD is designed and optimized to directly generate a photovoltage and has an external responsivity~12.2V/W with a 3dB bandwidth~42GHz. We utilize Au split-gates with a$\sim$100nm gap to electrostatically create a p-n-junction and simultaneou… ▽ More We present a micrometer scale, on-chip integrated, plasmonic enhanced graphene photodetector (GPD) for telecom wavelengths operating at zero dark current. The GPD is designed and optimized to directly generate a photovoltage and has an external responsivity~12.2V/W with a 3dB bandwidth~42GHz. We utilize Au split-gates with a$\sim$100nm gap to electrostatically create a p-n-junction and simultaneously guide a surface plasmon polariton gap-mode. This increases light-graphene interaction and optical absorption and results in an increased electronic temperature and steeper temperature gradient across the GPD channel. This paves the way to compact, on-chip integrated, power-efficient graphene based photodetectors for receivers in tele and datacom modules △ Less

Submitted 11 May, 2019; originally announced May 2019.

Journal ref: Nano Lett 19, 7632 (2019)

Niobium diselenide superconducting photodetectors

Authors: Gavin J. Orchin, Domenico De Fazio, Angelo Di Bernardo, Matthew Hamer, Duhee Yoon, Alisson R. Cadore, Ilya Goykhman, Kenji Watanabe, Takashi Taniguchi, Jason W. A. Robinson, Roman V. Gorbachev, Andrea C. Ferrari, Robert H. Hadfield

Abstract: We report the photoresponse of niobium diselenide (NbSe$_2$), a transition metal dichalcogenide (TMD) which exhibits superconducting properties down to a single layer. Devices are built by using micro-mechanically cleaved 2 to 10 layers and tested under current bias using nano-optical mapping in the 350mK-5K range, where they are found to be superconducting. The superconducting state can be broken… ▽ More We report the photoresponse of niobium diselenide (NbSe$_2$), a transition metal dichalcogenide (TMD) which exhibits superconducting properties down to a single layer. Devices are built by using micro-mechanically cleaved 2 to 10 layers and tested under current bias using nano-optical mapping in the 350mK-5K range, where they are found to be superconducting. The superconducting state can be broken by absorption of light, resulting in a voltage signal when the devices are current biased. The response found to be energy dependent making the devices useful for applications requiring energy resolution, such as bolometry, spectroscopy and infrared imaging. △ Less

Submitted 6 March, 2019; originally announced March 2019.

Comments: 6 pages, 6 figures

Source term calculation and validation for ${}^{18}$F-production with a cyclotron for medical applications at HZDR

Authors: J. Konheiser, S. E. Müller, A. Magin, B. Naumann, A. Ferrari

Abstract: In this document we present the calculation and experimental validation of a source term for ${}^{18}$F-production with a cyclotron for medical applications operating at 18 MeV proton energy and 30 $μ$A proton current. The Monte Carlo codes MCNP6 and FLUKA were used for the calculation of the source term. In addition, the radiation field around the $^{18}$O-enriched water target was simulated with… ▽ More In this document we present the calculation and experimental validation of a source term for ${}^{18}$F-production with a cyclotron for medical applications operating at 18 MeV proton energy and 30 $μ$A proton current. The Monte Carlo codes MCNP6 and FLUKA were used for the calculation of the source term. In addition, the radiation field around the $^{18}$O-enriched water target was simulated with the two codes. To validate the radiation field obtained in the simulation, an experimental program has been started using activation samples which are placed close to the water target during an ${}^{18}$F-production run of the cyclotron. After the irradiation, the samples are analyzed and the resulting activation is compared to Monte Carlo calculations of the expected sample activation. We find good agreement between simulations and experimental results, with most calculation to experiment (C/E) ratios well between 0.6 and 1.4. △ Less

Submitted 6 July, 2020; v1 submitted 6 March, 2019; originally announced March 2019.

Comments: 16 pages, 7 figures

Journal ref: J. Radiol. Prot. 39 (2019) 906-919

Coherent anti-Stokes Raman Spectroscopy of single and multi-layer graphene

Authors: A. Virga, C. Ferrante, G. Batignani, D. De Fazio, A. D. G. Nunn, A. C. Ferrari, G. Cerullo, T. Scopigno

Abstract: We report stimulated Raman spectroscopy of the G phonon in both single and multi-layer graphene, through Coherent anti-Stokes Raman Scattering (CARS). The signal generated by the third order nonlinearity is dominated by a vibrationally non-resonant background (NVRB), which obscures the Raman lineshape. We demonstrate that the vibrationally resonant CARS peak can be measured by reducing the tempora… ▽ More We report stimulated Raman spectroscopy of the G phonon in both single and multi-layer graphene, through Coherent anti-Stokes Raman Scattering (CARS). The signal generated by the third order nonlinearity is dominated by a vibrationally non-resonant background (NVRB), which obscures the Raman lineshape. We demonstrate that the vibrationally resonant CARS peak can be measured by reducing the temporal overlap of the laser excitation pulses, suppressing the NVRB. We model the observed spectra, taking into account the electronically resonant nature of both CARS and NVRB. We show that CARS can be used for graphene imaging with vibrational sensitivity. △ Less

Submitted 21 January, 2019; originally announced January 2019.

Comments: 10 pages, 5 figures

Machine learning-based Raman amplifier design

Authors: D. Zibar, A. Ferrari, V. Curri, A. Carena

Abstract: A multi-layer neural network is employed to learn the mapping between Raman gain profile and pump powers and wavelengths. The learned model predicts with high-accuracy, low-latency and low-complexity the pumping setup for any gain profile. A multi-layer neural network is employed to learn the mapping between Raman gain profile and pump powers and wavelengths. The learned model predicts with high-accuracy, low-latency and low-complexity the pumping setup for any gain profile. △ Less

Submitted 31 October, 2018; originally announced November 2018.

Comments: conference

Demonstration of MeV-Scale Physics in Liquid Argon Time Projection Chambers Using ArgoNeuT

Authors: ArgoNeuT Collaboration, R. Acciarri, C. Adams, J. Asaadi, B. Baller, T. Bolton, C. Bromberg, F. Cavanna, E. Church, D. Edmunds, A. Ereditato, S. Farooq, A. Ferrari, R. S. Fitzpatrick, B. Fleming, A. Hackenburg, G. Horton-Smith, C. James, K. Lang, M. Lantz, I. Lepetic, B. R. Littlejohn, X. Luo, R. Mehdiyev, B. Page , et al. (13 additional authors not shown)

Abstract: MeV-scale energy depositions by low-energy photons produced in neutrino-argon interactions have been identified and reconstructed in ArgoNeuT liquid argon time projection chamber (LArTPC) data. ArgoNeuT data collected on the NuMI beam at Fermilab were analyzed to select isolated low-energy depositions in the TPC volume. The total number, reconstructed energies and positions of these depositions ha… ▽ More MeV-scale energy depositions by low-energy photons produced in neutrino-argon interactions have been identified and reconstructed in ArgoNeuT liquid argon time projection chamber (LArTPC) data. ArgoNeuT data collected on the NuMI beam at Fermilab were analyzed to select isolated low-energy depositions in the TPC volume. The total number, reconstructed energies and positions of these depositions have been compared to those from simulations of neutrino-argon interactions using the FLUKA Monte Carlo generator. Measured features are consistent with energy depositions from photons produced by de-excitation of the neutrino's target nucleus and by inelastic scattering of primary neutrons produced by neutrino-argon interactions. This study represents a successful reconstruction of physics at the MeV-scale in a LArTPC, a capability of crucial importance for detection and reconstruction of supernova and solar neutrino interactions in future large LArTPCs. △ Less

Submitted 15 October, 2018; originally announced October 2018.

Report number: FERMILAB-PUB-18-559-ND

Journal ref: Phys. Rev. D 99, 012002 (2019)

Analysis of time-profiles with in-beam PET monitoring in charged particle therapy

Authors: A. C. Kraan, S. Muraro, G. Battistoni, N. Belcari, M. G. Bisogni, N. Camarlinghi, A. Del Guerra, A. Ferrari, R. Kopec, D. Krzempek, M. Morrocchi, P. Olko, P. Sala, K. Skowronska, G. Sportelli, A. Topi, V. Rosso

Abstract: Background: Treatment verification with PET imaging in charged particle therapy is conventionally done by comparing measurements of spatial distributions with Monte Carlo (MC) predictions. However, decay curves can provide additional independent information about the treatment and the irradiated tissue. Most studies performed so far focus on long time intervals. Here we investigate the reliability… ▽ More Background: Treatment verification with PET imaging in charged particle therapy is conventionally done by comparing measurements of spatial distributions with Monte Carlo (MC) predictions. However, decay curves can provide additional independent information about the treatment and the irradiated tissue. Most studies performed so far focus on long time intervals. Here we investigate the reliability of MC predictions of space and time (decay rate) profiles shortly after irradiation, and we show how the decay rates can give an indication about the elements of which the phantom is made up. Methods and Materials: Various phantoms were irradiated in clinical and near-clinical conditions at the Cyclotron Centre of the Bronowice proton therapy centre. PET data were acquired with a planar 16x16 cm$^2$ PET system. MC simulations of particle interactions and photon propagation in the phantoms were performed using the FLUKA code. The analysis included a comparison between experimental data and MC simulations of space and time profiles, as well as a fitting procedure to obtain the various isotope contributions in the phantoms. Results and conclusions: There was a good agreement between data and MC predictions in 1-dimensional space and decay rate distributions. The fractions of $^{11}$C, $^{15}$O and $^{10}$C that were obtained by fitting the decay rates with multiple simple exponentials generally agreed well with the MC expectations. We found a small excess of $^{10}$C in data compared to what was predicted in MC, which was clear especially in the PE phantom. △ Less

Submitted 28 September, 2018; originally announced September 2018.

Comments: 9 pages, 5 figures, 1 table. Proceedings of the 20th International Workshop on Radiation Imaging Detectors (iWorid2018), 24-28 June 2018, Sundsvall, Sweden

Wavelength tunable soliton rains in a nanotube-mode locked Tm-doped fiber laser

Authors: B. Fu, D. Popa, Z. Zhao, S. A. Hussain, E. Flahaut, T. Hasan, A. C. Ferrari

Abstract: We report soliton rains in a tuneable Tm-doped fiber laser mode locked by carbon nanotubes. We also detect their second- and third-harmonic. We achieve a tuneability of over 56nm, from 1877 to 1933nm, by introducing a polarization-maintaining isolator and two in-line polarization controllers. This makes our system promising as a tuneable filter for ultrafast spectroscopy. We report soliton rains in a tuneable Tm-doped fiber laser mode locked by carbon nanotubes. We also detect their second- and third-harmonic. We achieve a tuneability of over 56nm, from 1877 to 1933nm, by introducing a polarization-maintaining isolator and two in-line polarization controllers. This makes our system promising as a tuneable filter for ultrafast spectroscopy. △ Less

Submitted 7 July, 2018; originally announced July 2018.

Journal ref: Appl. Phys. Lett. 113, 193102 (2018)

Po-production in lead: A benchmark between Geant4, FLUKA and MCNPX

Authors: Alfredo Ferrari, Daniela Kiselev, Tatsumi Koi, Michael Wohlmuther, Jean-Christophe Davide

Abstract: On the last SATIF a comparison between the measured activities of the polonium isotopes Po-208, Po-209 and Po-210 and the simulated results using MCNPX2.7.0 was presented. The lead samples were cut from the SINQ spallation target at the Paul Scherrer Institut (PSI) and irradiated in 2000/2001 by 575 MeV protons. The Po-isotopes were separated using radiochemical methods by the group of D. Schumann… ▽ More On the last SATIF a comparison between the measured activities of the polonium isotopes Po-208, Po-209 and Po-210 and the simulated results using MCNPX2.7.0 was presented. The lead samples were cut from the SINQ spallation target at the Paul Scherrer Institut (PSI) and irradiated in 2000/2001 by 575 MeV protons. The Po-isotopes were separated using radiochemical methods by the group of D. Schumann at PSI and measured. Choosing the default model in MCNPX, Bertini-Dresner, the prediction underestimated the measured activities by up to several orders of magnitude. Therefore the Liège intranuclear-cascade model (INCL4.6) coupled to the de-excitation model ABLA07 were implemented into MCNPX2.7.0 and very good agreement was found to the measurement. The reason for the disagreement was traced back to a suppression of alpha reactions on the lead isotopes leading to Po and neglecting the triton capture on Pb-208, which leads to Pb-210 and decays into Po-210 with a much longer life time (22.3 years) than the decay of Po-210 itself (138 days). The prediction of the Po-isotope activities turns out to be a sensitive test for models and codes as it requires the accurate treatment of reaction channels not only with neutrons, protons and pions but also with alphas and tritons, which are not considered in intra-nuclear cascade models of the first generation. Therefore it was decided to perform a benchmark by comparing the results obtained with MCNPX2.7.0 using INCL4.6/ABLA07 to the predictions of FLUKA and Geant4. Since the model of the SINQ spallation source requires an elaborate geometry a toy model was setup. The toy model has a simplified geometry preserving the main features of the original geometry. The results for the activities of the three Po-isotopes and Pb-210 as well as the energy spectra for alphas and tritons obtained with the three particle transport Monte Carlo codes are presented. △ Less

Submitted 10 June, 2018; originally announced June 2018.

Comments: 15 pages, 11 figures, Presented paper at the 13th Meeting of the task-force on Shielding aspects of Accelerators, Targets and Irradiation Facilities (SATIF-13), HZDR, October 10-12, 2016, Dresden, Germany

Graphene Reflectarray Metasurface for Terahertz Beam Steering and Phase Modulation

Authors: Michele Tamagnone, Santiago Capdevila, Antonio Lombardo, Jingbo Wu, Alba Centeno, Amaia Zurutuza, Adrian M. Ionescu, Andrea C. Ferrari, Juan R. Mosig

Abstract: We report a THz reflectarray metasurface which uses graphene as active element to achieve beam steering, shaping and broadband phase modulation. This is based on the creation of a voltage controlled reconfigurable phase hologram, which can impart different reflection angles and phases to an incident beam, replacing bulky and fragile rotating mirrors used for terahertz imaging. This can also find a… ▽ More We report a THz reflectarray metasurface which uses graphene as active element to achieve beam steering, shaping and broadband phase modulation. This is based on the creation of a voltage controlled reconfigurable phase hologram, which can impart different reflection angles and phases to an incident beam, replacing bulky and fragile rotating mirrors used for terahertz imaging. This can also find applications in other regions of the electromagnetic spectrum, paving the way to versatile optical devices including light radars, adaptive optics, electro-optical modulators and screens. △ Less

Submitted 11 June, 2018; v1 submitted 5 June, 2018; originally announced June 2018.

Comments: 16 pages, 10 figures

Scalar Nanosecond Pulse Generation in a Nanotube Mode-Locked Environmentally Stable Fiber Laser

Authors: R. I. Woodward, E. J. R. Kelleher, D. Popa, T. Hasan, F. Bonaccorso, A. C. Ferrari, S. V. Popov, J. R. Taylor

Abstract: We report an environmentally stable nanotube mode-locked fibre laser producing linearly-polarized, nanosecond pulses. A simple all-polarization-maintaining fibre ring cavity is used, including 300 m of highly nonlinear fibre to elongate the cavity and increase intracavity dispersion and nonlinearity. The laser generates scalar pulses with a duration of 1.23 ns at a centre wavelength of 1042 nm, wi… ▽ More We report an environmentally stable nanotube mode-locked fibre laser producing linearly-polarized, nanosecond pulses. A simple all-polarization-maintaining fibre ring cavity is used, including 300 m of highly nonlinear fibre to elongate the cavity and increase intracavity dispersion and nonlinearity. The laser generates scalar pulses with a duration of 1.23 ns at a centre wavelength of 1042 nm, with 1.3-nm bandwidth and at 641-kHz repetition rate. Despite the long cavity, the output characteristics show no significant variation when the cavity is perturbed, and the degree of polarization remains at 97%. △ Less

Submitted 7 May, 2018; originally announced May 2018.

Journal ref: IEEE Photon, Tech. Lett. 26, 1672-1675 (2014)

Tetrahedral amorphous carbon resistive memories with graphene-based electrodes

Authors: A. K. Ott, C. Dou, U. Sassi, I. Goykhman, D. Yoon, J. Wu, A. Lombardo, A. C. Ferrari

Abstract: Resistive-switching memories are alternative to Si-based ones, which face scaling and high power consumption issues. Tetrahedral amorphous carbon (ta-C) shows reversible, non-volatile resistive switching. Here we report polarity independent ta-C resistive memory devices with graphene-based electrodes. Our devices show ON/OFF resistance ratios$\sim$4x$10^5$, ten times higher than with metal electro… ▽ More Resistive-switching memories are alternative to Si-based ones, which face scaling and high power consumption issues. Tetrahedral amorphous carbon (ta-C) shows reversible, non-volatile resistive switching. Here we report polarity independent ta-C resistive memory devices with graphene-based electrodes. Our devices show ON/OFF resistance ratios$\sim$4x$10^5$, ten times higher than with metal electrodes, with no increase in switching power, and low power density$\sim$14$μ$W/$μ$m$^2$. We attribute this to a suppressed tunneling current due to the low density of states of graphene near the Dirac point, consistent with the current-voltage characteristics derived from a quantum point contact model. Our devices also have multiple resistive states. This allows storing more than one bit per cell. This can be exploited in a range of signal processing/computing-type operations, such as implementing logic, providing synaptic and neuron-like mimics, and performing analogue signal processing in non-von-Neumann architectures △ Less

Submitted 5 May, 2018; originally announced May 2018.

Journal ref: 2d Materials 5, 045028 (2018)

An induced annealing technique for SiPMs neutron radiation damage

Authors: M. Cordelli, E. Diociaiuti, A. Ferrari, S. Miscetti, S. Muller, G. Pezzullo, I. Sarra

Abstract: The use of Silicon Photo-Multipliers(SiPMs)has become popular in the design of High Energy Physics experimental apparatus with a growing interest for their application in detector area where a significant amount of non-ionising dose is delivered. For these devices, the main effect caused by the neutron fluence is a linear increase of the leakage current. In this paper, we present a technique that… ▽ More The use of Silicon Photo-Multipliers(SiPMs)has become popular in the design of High Energy Physics experimental apparatus with a growing interest for their application in detector area where a significant amount of non-ionising dose is delivered. For these devices, the main effect caused by the neutron fluence is a linear increase of the leakage current. In this paper, we present a technique that provides a partial recovery of the neutron damage on SiPMs by means of an Electrical Induced Annealing. Tests were performed, at the temperature of 20C, on a sample of three SiPM arrays (2x3) of 6 mm^2 cells with 50 um pixel sizes: two from Hamamatsu and one from SensL. These SiPMs have been exposed to neutrons generated by the Elbe Positron Source facility (Dresden), up to a total fluence of 8x10^11 n1MeV-eq/cm^2. Our techniques allowed to reduced the leakage current of a factor ranging between 15-20 depending on the overbias used and the SiPM vendor. Because, during the process the SiPM current can reach O(100 mA), the sensors need to be operated in a condition that provides thermal dissipation. Indeed, caution must be used when applying this kind of procedures on the SiPMs, because it may damage permanently the device itself. △ Less

Submitted 6 December, 2021; v1 submitted 25 April, 2018; originally announced April 2018.

Expression of Interest for Evolution of the Mu2e Experiment

Authors: F. Abusalma, D. Ambrose, A. Artikov, R. Bernstein, G. C. Blazey, C. Bloise, S. Boi, T. Bolton, J. Bono, R. Bonventre, D. Bowring, D. Brown, D. Brown, K. Byrum, M. Campbell, J. -F. Caron, F. Cervelli, D. Chokheli, K. Ciampa, R. Ciolini, R. Coleman, D. Cronin-Hennessy, R. Culbertson, M. A. Cummings, A. Daniel , et al. (103 additional authors not shown)

Abstract: We propose an evolution of the Mu2e experiment, called Mu2e-II, that would leverage advances in detector technology and utilize the increased proton intensity provided by the Fermilab PIP-II upgrade to improve the sensitivity for neutrinoless muon-to-electron conversion by one order of magnitude beyond the Mu2e experiment, providing the deepest probe of charged lepton flavor violation in the fores… ▽ More We propose an evolution of the Mu2e experiment, called Mu2e-II, that would leverage advances in detector technology and utilize the increased proton intensity provided by the Fermilab PIP-II upgrade to improve the sensitivity for neutrinoless muon-to-electron conversion by one order of magnitude beyond the Mu2e experiment, providing the deepest probe of charged lepton flavor violation in the foreseeable future. Mu2e-II will use as much of the Mu2e infrastructure as possible, providing, where required, improvements to the Mu2e apparatus to accommodate the increased beam intensity and cope with the accompanying increase in backgrounds. △ Less

Submitted 7 February, 2018; originally announced February 2018.

Comments: 17 pages, 4 figures, 1 table; Submitted to the Fermilab Physics Advisory Committee

Report number: Fermilab-FN-1052