Showing 1–10 of 10 results for author: Fernow, R C

rf Breakdown with and without External Magnetic Fields

Authors: Robert B. Palmer, Richard C. Fernow, Juan C. Gallardo, Diktys Stratakis, Derun Li

Abstract: Neutrino Factories and Muon Colliders' cooling lattices require both high gradient rf and strong focusing solenoids. Experiments have shown that there may be serious problems operating rf in the required magnetic fields. The use of high pressure gas to avoid these problems is discussed, including possible loss problems from electron and ion production by the passage of an ionizing beam. It is al… ▽ More Neutrino Factories and Muon Colliders' cooling lattices require both high gradient rf and strong focusing solenoids. Experiments have shown that there may be serious problems operating rf in the required magnetic fields. The use of high pressure gas to avoid these problems is discussed, including possible loss problems from electron and ion production by the passage of an ionizing beam. It is also noted that high pressure gas cannot be used in later stages of cooling for a muon collider. Experimental observations using vacuum rf cavities in magnetic fields are discussed, current published models of breakdown with and without magnetic fields are summarized, and some of their predictions compared with observations. A new theory of magnetic field dependent breakdown is presented. It is proposed that electrons emitted by field emission on asperities on one side of a cavity are focused by the magnetic field to the other side where they melt the cavity surface in small spots. Metal is then electrostatically drawn from the molten spots, becomes vaporized and ionized by field emission from the remaining damage and cause breakdown. The theory is fitted to existing 805 MHz data and predictions are made for performance at 201 MHz. The model predicts breakdown gradients significantly below those specified for either the International Scoping Study (ISS) Neutrino Factory or a Muon Collider. Possible solutions to these problems are discussed, including designs for `magnetically insulated rf' in which the cavity walls are designed to be parallel to a chosen magnetic field contour line and consequently damage from field emission is suppressed. An experimental program to study these problems and their possible solution is outlined. △ Less

Submitted 9 September, 2008; originally announced September 2008.

Comments: 16 pages, 21 figures, 2 tables

Report number: BNL-81489-2008-JA

A Complete Scheme of Ionization Cooling for a Muon Collider

Authors: Robert B. Palmer, J. Scott Berg, Richard C. Fernow, Juan Carlos Gallardo, Harold G. Kirk, Yuri Alexahin, David Neuffer, Stephen Alan Kahn, Don Summers

Abstract: A complete scheme for production and cooling a muon beam for three specified muon colliders is presented. Parameters for these muon colliders are given. The scheme starts with the front end of a proposed neutrino factory that yields bunch trains of both muon signs. Emittance exchange cooling in slow helical lattices reduces the longitudinal emittance until it becomes possible to merge the trains… ▽ More A complete scheme for production and cooling a muon beam for three specified muon colliders is presented. Parameters for these muon colliders are given. The scheme starts with the front end of a proposed neutrino factory that yields bunch trains of both muon signs. Emittance exchange cooling in slow helical lattices reduces the longitudinal emittance until it becomes possible to merge the trains into single bunches, one of each sign. Further cooling in all dimensions is applied to the single bunches in further slow helical lattices. Final transverse cooling to the required parameters is achieved in 50 T solenoids using high Tc superconductor at 4 K. Preliminary simulations of each element are presented. △ Less

Submitted 27 November, 2007; originally announced November 2007.

Comments: 3 pages, 6 figures

Report number: BNL-78088-2007-CP

Journal ref: Conf.Proc.C070625:3193,2007

A Complete Scheme for a Muon Collider

Authors: Robert B. Palmer, J. Scott Berg, Richard C. Fernow, Juan Carlos Gallardo, Harold G. Kirk, ; Yuri Alexahin, David Neuffer, ; Stephen Alan Kahn, ; Don J. Summers

Abstract: A complete scheme for production, cooling, acceleration, and ring for a 1.5 TeV center of mass muon collider is presented, together with parameters for two higher energy machines. The schemes starts with the front end of a proposed neutrino factory that yields bunch trains of both muon signs. Six dimensional cooling in long-period helical lattices reduces the longitudinal emittance until it beco… ▽ More A complete scheme for production, cooling, acceleration, and ring for a 1.5 TeV center of mass muon collider is presented, together with parameters for two higher energy machines. The schemes starts with the front end of a proposed neutrino factory that yields bunch trains of both muon signs. Six dimensional cooling in long-period helical lattices reduces the longitudinal emittance until it becomes possible to merge the trains into single bunches, one of each sign. Further cooling in all dimensions is applied to the single bunches in further helical lattices. Final transverse cooling to the required parameters is achieved in 50 T solenoids. △ Less

Submitted 18 September, 2007; originally announced September 2007.

Comments: 5 pages, 9 figures (EPS); submitted to Proceedings of COOL 07 Workshop

Report number: NFMCC-doc-519

Journal ref: Conf.Proc.C07091010:tum2i06,2007

Ab Initio Liquid Hydrogen Muon Cooling Simulations with ELMS in ICOOL

Authors: W. W. M. Allison, J. H. Cobb, S. J. Holmes, R. C. Fernow, R. B. Palmer

Abstract: This paper presents new theoretical results on the passage of muons through liquid hydrogen which have been confirmed in a recent experiment. These are used to demonstrate that muon bunches may be compressed by ionisation cooling more effectively than suggested by previous calculations. Muon cooling depends on the differential cross section for energy loss and scattering of muons. We have calc… ▽ More This paper presents new theoretical results on the passage of muons through liquid hydrogen which have been confirmed in a recent experiment. These are used to demonstrate that muon bunches may be compressed by ionisation cooling more effectively than suggested by previous calculations. Muon cooling depends on the differential cross section for energy loss and scattering of muons. We have calculated this cross section for liquid H2 from first principles and atomic data, avoiding traditional assumptions. Thence, 2-D probability maps of energy loss and scattering in mm-scale thicknesses are derived by folding, and stored in a database. Large first-order correlations between energy loss and scattering are found for H2, which are absent in other simulations. This code is named ELMS, Energy Loss & Multiple Scattering. Single particle trajectories may then be tracked by Monte Carlo sampling from this database on a scale of 1 mm or less. This processor has been inserted into the cooling code ICOOL. Significant improvements in 6-D muon cooling are predicted compared with previous predictions based on GEANT. This is examined in various geometries. The large correlation effect is found to have only a small effect on cooling. The experimental scattering observed for liquid H2 in the MUSCAT experiment has recently been reported to be in good agreement with the ELMS prediction, but in poor agreement with GEANT simulation. △ Less

Submitted 22 September, 2006; originally announced September 2006.

Comments: 6 pages, 3 figures

Journal ref: J.Phys.G34:679-685,2007

A Cost-Effective Design for a Neutrino Factory

Authors: J. S. Berg, S. A. Bogacz, S. Caspi, J. Cobb, R. C. Fernow, J. C. Gallardo, S. Kahn, H. Kirk, D. Neuffer, R. B. Palmer, K. Paul, H. Witte, M. Zisman

Abstract: There have been active efforts in the U.S., Europe, and Japan on the design of a Neutrino Factory. This type of facility produces intense beams of neutrinos from the decay of muons in a high energy storage ring. In the U.S., a second detailed Feasibility Study (FS2) for a Neutrino Factory was completed in 2001. Since that report was published, new ideas in bunching, cooling and acceleration of m… ▽ More There have been active efforts in the U.S., Europe, and Japan on the design of a Neutrino Factory. This type of facility produces intense beams of neutrinos from the decay of muons in a high energy storage ring. In the U.S., a second detailed Feasibility Study (FS2) for a Neutrino Factory was completed in 2001. Since that report was published, new ideas in bunching, cooling and acceleration of muon beams have been developed. We have incorporated these ideas into a new facility design, which we designate as Study 2B (ST2B), that should lead to significant cost savings over the FS2 design. △ Less

Submitted 10 November, 2005; originally announced November 2005.

Comments: 46 pages, 38 figures; to be submitted to Physical Review Special Topics: Accelerators and Beams

Report number: BNL-75054-2005-JA; MUC-NOTES-327

Journal ref: Phys.Rev.ST Accel.Beams 9:011001,2006

The RFOFO Ionization Cooling Ring for Muons

Authors: R. Palmer, V. Balbekov, J. S. Berg, S. Bracker, L. Cremaldi, R. C. Fernow, J. C. Gallardo, R. Godang, G. Hanson, A. Klier, D. Summers

Abstract: Practical ionization cooling rings could lead to lower cost or improved performance in neutrino factory or muon collider designs. The ring modeled here uses realistic three-dimensional fields. The performance of the ring compares favorably with the linear cooling channel used in the second US Neutrino Factory Study. The normalized 6D emittance of an ideal ring is decreased by a factor of approxi… ▽ More Practical ionization cooling rings could lead to lower cost or improved performance in neutrino factory or muon collider designs. The ring modeled here uses realistic three-dimensional fields. The performance of the ring compares favorably with the linear cooling channel used in the second US Neutrino Factory Study. The normalized 6D emittance of an ideal ring is decreased by a factor of approximately 240, compared with a factor of only 15 for the linear channel. We also examine such \textit{real-world} effects as windows on the absorbers and rf cavities and leaving empty lattice cells for injection and extraction. For realistic conditions the ring decreases the normalized 6D emittance by a factor of 49. △ Less

Submitted 14 April, 2005; originally announced April 2005.

Comments: 27 pages, 18 figures and 5 tables. Submitted to Phys. Rev. ST-AB

Report number: MUC-PUB-COOL_THEORY-314; BNl_PUB-

Journal ref: Phys.Rev.ST Accel.Beams 8:061003,2005

Muon Dynamics in a Toroidal Sector Magnet

Authors: Juan C. Gallardo, Richard C. Fernow, Robert B. Palmer

Abstract: We present a Hamiltonian formulation of muon dynamics in toroidal sector solenoids (bent solenoids) We present a Hamiltonian formulation of muon dynamics in toroidal sector solenoids (bent solenoids) △ Less

Submitted 2 February, 1998; originally announced February 1998.

Comments: format aipproc.cls; aipproc.sty; 7 pages, two figures (*.ps). Submitted to the Proceedings of the 4th International Conference on Physics Potential and Development of mu-mu Colliders, San Francisco, Dec. 1997

Journal ref: AIP Conf.Proc.441:282-288,1998

MONTE CARLO SIMULATIONS OF MUON PRODUCTION

Authors: R. B. Palmer, J. C. Gallardo, R. C. Fernow, Y. Torun, D. Neuffer, D. Winn

Abstract: Muon production requirements for a muon collider are presented. Production of muons from pion decay is studied. Lithium lenses and solenoids are considered for focussing pions from a target, and for matching the pions into a decay channel. Pion decay channels of alternating quadrupoles and long solenoids are compared. Monte Carlo simulations are presented for production of $π\rightarrow μ$ by pr… ▽ More Muon production requirements for a muon collider are presented. Production of muons from pion decay is studied. Lithium lenses and solenoids are considered for focussing pions from a target, and for matching the pions into a decay channel. Pion decay channels of alternating quadrupoles and long solenoids are compared. Monte Carlo simulations are presented for production of $π\rightarrow μ$ by protons over a wide energy range, and criteria for choosing the best proton energy are discussed. △ Less

Submitted 30 March, 1995; originally announced March 1995.

Comments: Latex uses mu95.sty, 19 pages, 5 postscript figures. A postscript file can be seen at URL http://www.cap.bnl.gov/~cap/mumu/important.html Search for Publications

Journal ref: AIP Conf.Proc.352:108-124,1996

Muon Transverse Ionization Cooling: Stochastic Approach

Authors: Richard C. Fernow, Juan C. Gallardo

Abstract: Transverse ionization cooling of muons is modeled as a Brownian motion of the muon beam as it traverses a Li or Be rod. A Langevin like equation is written for the free particle case (no external transverse magnetic field) and for the case of a harmonically bound beam in the presence of a focusing magnetic field. We demonstrate that the well known muon cooling equations for short-absorbers can b… ▽ More Transverse ionization cooling of muons is modeled as a Brownian motion of the muon beam as it traverses a Li or Be rod. A Langevin like equation is written for the free particle case (no external transverse magnetic field) and for the case of a harmonically bound beam in the presence of a focusing magnetic field. We demonstrate that the well known muon cooling equations for short-absorbers can be extrapolated to the useful case of a long absorber rod with a focusing magnetic field present. △ Less

Submitted 30 March, 1995; originally announced March 1995.

Comments: Latex uses revtex, 9 pages; submitted to Phys. Rev E

Journal ref: Phys.Rev.E52:1039-1042,1995

Beam Dynamics problems in a muon collider

Authors: R. B. Palmer, J. C. Gallardo, R. C. Fernow, H. Kirk, I. Stumer, Y. Y. Lee, M. Syphers, Y. Torun, D. Winn, D. Neuffer, Y. Cho, J. Norem, N. Mokhov, R. Noble, A. Tollestrup, R. Scanlan, S. Caspi, O. Napoly

Abstract: We discuss the various beam dynamics problems in muon collider systems, starting from the proton accelerator needed to generate the muon beams and proceeding through the muon storage ring. We discuss the various beam dynamics problems in muon collider systems, starting from the proton accelerator needed to generate the muon beams and proceeding through the muon storage ring. △ Less

Submitted 30 March, 1995; originally announced March 1995.

Comments: Latex, 11 pages, submitted to ICFA Beam Dynamics Newsletter

Journal ref: ICFA Beam Dyn.Newslett.8:27-33,1995