-
From Solution to Surface: Persistence of the Diradical Character of a Diindenoanthracene Derivative on a Metallic Substrate
Authors:
Jeremy Hieulle,
Carlos Garcia Fernandez,
Niklas Friedrich,
Alessio Vegliante,
Sofia Sanz,
Daniel Sanchez-Portal,
Michael M. Haley,
Juan Casado,
Thomas Frederiksen,
Jose Ignacio Pascual
Abstract:
Organic diradicals are envisioned as elementary building blocks for designing a new generation of spintronic devices and have been used in constructing prototypical field effect transistors and non-linear optical devices. Open-shell systems, however, are also reactive, thus requiring design strategies to protect their radical character from the environment, especially when they are embedded into s…
▽ More
Organic diradicals are envisioned as elementary building blocks for designing a new generation of spintronic devices and have been used in constructing prototypical field effect transistors and non-linear optical devices. Open-shell systems, however, are also reactive, thus requiring design strategies to protect their radical character from the environment, especially when they are embedded into solid-state devices. Here, we report the persistence on a metallic surface of the diradical character of a diindeno[b,i]anthracene (DIAn) core protected by bulky end-groups. Our scanning tunneling spectroscopy measurements on single-molecules detected singlet-triplet excitations that were absent for DIAn species packed in assembled structures. Density functional theory simulations unravel that molecular geometry on the metal substrate can crucially modify the value of the single-triplet gap via the delocalization of the radical sites. The persistence of the diradical character over metallic substrates is a promising finding for integrating radical-based materials in functional devices.
△ Less
Submitted 13 January, 2025;
originally announced January 2025.
-
Stronger when wet: Water-resistant chitinous objects via zero-waste coordination with metal ions
Authors:
Akshayakumar Kompa,
Javier G Fernandez
Abstract:
Plastics have become integral to our society due to their durability and water stability, which is achieved through strong intermolecular interactions. However, these properties also make them persistent disruptors of ecological cycles, in contrast with biological structures, which work with their environments to achieve both excellent mechanical properties and ecological integration. This study t…
▽ More
Plastics have become integral to our society due to their durability and water stability, which is achieved through strong intermolecular interactions. However, these properties also make them persistent disruptors of ecological cycles, in contrast with biological structures, which work with their environments to achieve both excellent mechanical properties and ecological integration. This study takes inspiration from the arthropod cuticle to adapt Earth's second most abundant organic molecule for use in water. The process involves the vitrification of chitosan with small traces of nickel to create a dynamic network of intermolecular bonds using environmental water, resulting in a material that increases its strength to values well above commodity plastics when wet. The approach preserves the molecule's original chemistry and therefore its seamless integration into Earth's metabolism while avoiding the use of the strong organic solvents typically associated with biomolecules. The method demonstrates the potential for a paradigm shift in manufacturing, with zero waste production of both consumables and large objects that could meet the global demand for plastic.
△ Less
Submitted 13 October, 2024;
originally announced October 2024.
-
Crystallization Instead of Amorphization in Collision Cascades in Gallium Oxide
Authors:
Junlei Zhao,
Javier García Fernández,
Alexander Azarov,
Ru He,
Øystein Prytz,
Kai Nordlund,
Mengyuan Hua,
Flyura Djurabekova,
Andrej Kuznetsov
Abstract:
Disordering of solids typically leads to amorphization, but polymorph transitions, facilitated by favorable atomic rearrangements, may temporarily help to maintain long-range periodicity in the solid state. In far-from-equilibrium situations, such as atomic collision cascades, these rearrangements may not necessarily follow a thermodynamically gainful path, but may be kinetically limited. In this…
▽ More
Disordering of solids typically leads to amorphization, but polymorph transitions, facilitated by favorable atomic rearrangements, may temporarily help to maintain long-range periodicity in the solid state. In far-from-equilibrium situations, such as atomic collision cascades, these rearrangements may not necessarily follow a thermodynamically gainful path, but may be kinetically limited. In this Letter, we focused on such crystallization instead of amorphization in collision cascades in gallium oxide (\ce{Ga2O3}). We determined the disorder threshold for irreversible $β$-to-$γ$ polymorph transition and explained why it results in elevating energy to that of the $γ$-polymorph, which exhibits the highest polymorph energy in the system below the amorphous state. Specifically, we demonstrate that upon reaching the disorder transition threshold, the \ce{Ga}-sublattice kinetically favors transitioning to the $γ$-like configuration, requiring significantly less migration for \ce{Ga} atoms to reach the lattice sites during post-cascade processes. As such, our data provide a consistent explanation of this remarkable phenomenon and can serve as a toolbox for predictive multi-polymorph fabrication.
△ Less
Submitted 7 March, 2024; v1 submitted 15 January, 2024;
originally announced January 2024.
-
The LHCb upgrade I
Authors:
LHCb collaboration,
R. Aaij,
A. S. W. Abdelmotteleb,
C. Abellan Beteta,
F. Abudinén,
C. Achard,
T. Ackernley,
B. Adeva,
M. Adinolfi,
P. Adlarson,
H. Afsharnia,
C. Agapopoulou,
C. A. Aidala,
Z. Ajaltouni,
S. Akar,
K. Akiba,
P. Albicocco,
J. Albrecht,
F. Alessio,
M. Alexander,
A. Alfonso Albero,
Z. Aliouche,
P. Alvarez Cartelle,
R. Amalric,
S. Amato
, et al. (1298 additional authors not shown)
Abstract:
The LHCb upgrade represents a major change of the experiment. The detectors have been almost completely renewed to allow running at an instantaneous luminosity five times larger than that of the previous running periods. Readout of all detectors into an all-software trigger is central to the new design, facilitating the reconstruction of events at the maximum LHC interaction rate, and their select…
▽ More
The LHCb upgrade represents a major change of the experiment. The detectors have been almost completely renewed to allow running at an instantaneous luminosity five times larger than that of the previous running periods. Readout of all detectors into an all-software trigger is central to the new design, facilitating the reconstruction of events at the maximum LHC interaction rate, and their selection in real time. The experiment's tracking system has been completely upgraded with a new pixel vertex detector, a silicon tracker upstream of the dipole magnet and three scintillating fibre tracking stations downstream of the magnet. The whole photon detection system of the RICH detectors has been renewed and the readout electronics of the calorimeter and muon systems have been fully overhauled. The first stage of the all-software trigger is implemented on a GPU farm. The output of the trigger provides a combination of totally reconstructed physics objects, such as tracks and vertices, ready for final analysis, and of entire events which need further offline reprocessing. This scheme required a complete revision of the computing model and rewriting of the experiment's software.
△ Less
Submitted 10 September, 2024; v1 submitted 17 May, 2023;
originally announced May 2023.
-
Universal radiation tolerant semiconductor
Authors:
Alexander Azarov,
Javier García Fernández,
Junlei Zhao,
Flyura Djurabekova,
Huan He,
Ru He,
Øystein Prytz,
Lasse Vines,
Umutcan Bektas,
Paul Chekhonin,
Nico Klingner,
Gregor Hlawacek,
Andrej Kuznetsov
Abstract:
Radiation tolerance is determined as the ability of crystalline materials to withstand the accumulation of the radiation induced disorder. Nevertheless, for sufficiently high fluences, in all by far known semiconductors it ends up with either very high disorder levels or amorphization. Here we show that gamma/beta double polymorph Ga2O3 structures exhibit remarkably high radiation tolerance. Speci…
▽ More
Radiation tolerance is determined as the ability of crystalline materials to withstand the accumulation of the radiation induced disorder. Nevertheless, for sufficiently high fluences, in all by far known semiconductors it ends up with either very high disorder levels or amorphization. Here we show that gamma/beta double polymorph Ga2O3 structures exhibit remarkably high radiation tolerance. Specifically, for room temperature experiments, they tolerate a disorder equivalent to hundreds of displacements per atom, without severe degradations of crystallinity; in comparison with, e.g., Si amorphizable already with the lattice atoms displaced just once. We explain this behavior by an interesting combination of the Ga- and O- sublattice properties in gamma-Ga2O3. In particular, O-sublattice exhibits a strong recrystallization trend to recover the face-centered-cubic stacking despite the stronger displacement of O atoms compared to Ga during the active periods of cascades. Notably, we also explained the origin of the beta-to-gamma Ga2O3 transformation, as a function of the increased disorder in beta-Ga2O3 and studied the phenomena as a function of the chemical nature of the implanted atoms. As a result, we conclude that gamma/beta double polymorph Ga2O3 structures, in terms of their radiation tolerance properties, benchmark a class of universal radiation tolerant semiconductors.
△ Less
Submitted 14 August, 2023; v1 submitted 23 March, 2023;
originally announced March 2023.
-
The Analytical Method algorithm for trigger primitives generation at the LHC Drift Tubes detector
Authors:
G. Abbiendi,
J. Alcaraz Maestre,
A. Álvarez Fernández,
B. Álvarez González,
N. Amapane,
I. Bachiller,
L. Barcellan,
C. Baldanza,
C. Battilana,
M. Bellato,
G. Bencze,
M. Benettoni,
N. Beni,
A. Benvenuti,
A. Bergnoli,
L. C. Blanco Ramos,
L. Borgonovi,
A. Bragagnolo,
V. Cafaro,
A. Calderon,
E. Calvo,
R. Carlin,
C. A. Carrillo Montoya,
F. R. Cavallo,
J. M. Cela Ruiz
, et al. (121 additional authors not shown)
Abstract:
The Compact Muon Solenoid (CMS) experiment prepares its Phase-2 upgrade for the high-luminosity era of the LHC operation (HL-LHC). Due to the increase of occupancy, trigger latency and rates, the full electronics of the CMS Drift Tube (DT) chambers will need to be replaced. In the new design, the time bin for the digitisation of the chamber signals will be of around 1~ns, and the totality of the s…
▽ More
The Compact Muon Solenoid (CMS) experiment prepares its Phase-2 upgrade for the high-luminosity era of the LHC operation (HL-LHC). Due to the increase of occupancy, trigger latency and rates, the full electronics of the CMS Drift Tube (DT) chambers will need to be replaced. In the new design, the time bin for the digitisation of the chamber signals will be of around 1~ns, and the totality of the signals will be forwarded asynchronously to the service cavern at full resolution. The new backend system will be in charge of building the trigger primitives of each chamber. These trigger primitives contain the information at chamber level about the muon candidates position, direction, and collision time, and are used as input in the L1 CMS trigger. The added functionalities will improve the robustness of the system against ageing. An algorithm based on analytical solutions for reconstructing the DT trigger primitives, called Analytical Method, has been implemented both as a software C++ emulator and in firmware. Its performance has been estimated using the software emulator with simulated and real data samples, and through hardware implementation tests. Measured efficiencies are 96 to 98\% for all qualities and time and spatial resolutions are close to the ultimate performance of the DT chambers. A prototype chain of the HL-LHC electronics using the Analytical Method for trigger primitive generation has been installed during Long Shutdown 2 of the LHC and operated in CMS cosmic data taking campaigns in 2020 and 2021. Results from this validation step, the so-called Slice Test, are presented.
△ Less
Submitted 3 February, 2023;
originally announced February 2023.
-
The height of chitinous ridges alone produces the entire structural colour palette
Authors:
Hemant Kumar Raut,
Qifeng Ruan,
Cédric Finet,
Vinodkumar Saranathan,
Joel Yang,
Javier Gomez Fernandez
Abstract:
The colourful wings of butterflies result from the interaction between light and the intricate chitinous nanostructures on butterflies' scales. This study demonstrates that just by reproducing the chitinous ridges present in butterfly scales (i.e., without any other secondary structure), the entire colour palette is achieved. This result was achieved using a new methodology based on the controlled…
▽ More
The colourful wings of butterflies result from the interaction between light and the intricate chitinous nanostructures on butterflies' scales. This study demonstrates that just by reproducing the chitinous ridges present in butterfly scales (i.e., without any other secondary structure), the entire colour palette is achieved. This result was achieved using a new methodology based on the controlled reproduction of parts of the biological structure of complex chitinous systems using their native chemistry, enabling the isolation of different features' contributions. Here we isolate the contribution of the ridges and their variations as producing and modulating colour hue. The results suggest that complicated butterfly scales may be non-ideal solutions for producing colour when multifunctionality is not considered.
△ Less
Submitted 12 October, 2022;
originally announced October 2022.
-
Study of the effects of radiation on the CMS Drift Tubes Muon Detector for the HL-LHC
Authors:
G. Abbiendi,
J. Alcaraz Maestre,
A. Álvarez Fernández,
B. Álvarez González,
N. Amapane,
I. Bachiller,
J. M. Barcala,
L. Barcellan,
C. Battilana,
M. Bellato,
G. Bencze,
M. Benettoni,
N. Beni,
A. Benvenuti,
L. C. Blanco Ramos,
A. Boletti,
A. Bragagnolo,
J. A. Brochero Cifuentes,
V. Cafaro,
A. Calderon,
E. Calvo,
A. Cappati,
R. Carlin,
C. A. Carrillo Montoya,
F. R. Cavallo
, et al. (118 additional authors not shown)
Abstract:
The CMS drift tubes (DT) muon detector, built for withstanding the LHC expected integrated and instantaneous luminosities, will be used also in the High Luminosity LHC (HL-LHC) at a 5 times larger instantaneous luminosity and, consequently, much higher levels of radiation, reaching about 10 times the LHC integrated luminosity. Initial irradiation tests of a spare DT chamber at the CERN gamma irrad…
▽ More
The CMS drift tubes (DT) muon detector, built for withstanding the LHC expected integrated and instantaneous luminosities, will be used also in the High Luminosity LHC (HL-LHC) at a 5 times larger instantaneous luminosity and, consequently, much higher levels of radiation, reaching about 10 times the LHC integrated luminosity. Initial irradiation tests of a spare DT chamber at the CERN gamma irradiation facility (GIF++), at large ($\sim$O(100)) acceleration factor, showed ageing effects resulting in a degradation of the DT cell performance. However, full CMS simulations have shown almost no impact in the muon reconstruction efficiency over the full barrel acceptance and for the full integrated luminosity. A second spare DT chamber was moved inside the GIF++ bunker in October 2017. The chamber was being irradiated at lower acceleration factors, and only 2 out of the 12 layers of the chamber were switched at working voltage when the radioactive source was active, being the other layers in standby. In this way the other non-aged layers are used as reference and as a precise and unbiased telescope of muon tracks for the efficiency computation of the aged layers of the chamber, when set at working voltage for measurements. An integrated dose equivalent to two times the expected integrated luminosity of the HL-LHC run has been absorbed by this second spare DT chamber and the final impact on the muon reconstruction efficiency is under study. Direct inspection of some extracted aged anode wires presented a melted resistive deposition of materials. Investigation on the outgassing of cell materials and of the gas components used at the GIF++ are underway. Strategies to mitigate the ageing effects are also being developed. From the long irradiation measurements of the second spare DT chamber, the effects of radiation in the performance of the DTs expected during the HL-LHC run will be presented.
△ Less
Submitted 12 December, 2019;
originally announced December 2019.
-
SENSEI: Direct-Detection Constraints on Sub-GeV Dark Matter from a Shallow Underground Run Using a Prototype Skipper-CCD
Authors:
Orr Abramoff,
Liron Barak,
Itay M. Bloch,
Luke Chaplinsky,
Michael Crisler,
Dawa,
Alex Drlica-Wagner,
Rouven Essig,
Juan Estrada,
Erez Etzion,
Guillermo Fernandez,
Daniel Gift,
Joseph Taenzer,
Javier Tiffenberg,
Miguel Sofo Haro,
Tomer Volansky,
Tien-Tien Yu
Abstract:
We present new direct-detection constraints on eV-to-GeV dark matter interacting with electrons using a prototype detector of the Sub-Electron-Noise Skipper-CCD Experimental Instrument. The results are based on data taken in the MINOS cavern at the Fermi National Accelerator Laboratory. We focus on data obtained with two distinct readout strategies. For the first strategy, we read out the Skipper-…
▽ More
We present new direct-detection constraints on eV-to-GeV dark matter interacting with electrons using a prototype detector of the Sub-Electron-Noise Skipper-CCD Experimental Instrument. The results are based on data taken in the MINOS cavern at the Fermi National Accelerator Laboratory. We focus on data obtained with two distinct readout strategies. For the first strategy, we read out the Skipper-CCD continuously, accumulating an exposure of 0.177 gram-days. While we observe no events containing three or more electrons, we find a large one- and two-electron background event rate, which we attribute to spurious events induced by the amplifier in the Skipper-CCD readout stage. For the second strategy, we take five sets of data in which we switch off all amplifiers while exposing the Skipper-CCD for 120k seconds, and then read out the data through the best prototype amplifier. We find a one-electron event rate of (3.51 +- 0.10) x 10^(-3) events/pixel/day, which is almost two orders of magnitude lower than the one-electron event rate observed in the continuous-readout data, and a two-electron event rate of (3.18 +0.86 -0.55) x 10^(-5) events/pixel/day. We again observe no events containing three or more electrons, for an exposure of 0.069 gram-days. We use these data to derive world-leading constraints on dark matter-electron scattering for masses between 500 keV to 5 MeV, and on dark-photon dark matter being absorbed by electrons for a range of masses below 12.4 eV.
△ Less
Submitted 29 January, 2019;
originally announced January 2019.
-
A Roadmap for HEP Software and Computing R&D for the 2020s
Authors:
Johannes Albrecht,
Antonio Augusto Alves Jr,
Guilherme Amadio,
Giuseppe Andronico,
Nguyen Anh-Ky,
Laurent Aphecetche,
John Apostolakis,
Makoto Asai,
Luca Atzori,
Marian Babik,
Giuseppe Bagliesi,
Marilena Bandieramonte,
Sunanda Banerjee,
Martin Barisits,
Lothar A. T. Bauerdick,
Stefano Belforte,
Douglas Benjamin,
Catrin Bernius,
Wahid Bhimji,
Riccardo Maria Bianchi,
Ian Bird,
Catherine Biscarat,
Jakob Blomer,
Kenneth Bloom,
Tommaso Boccali
, et al. (285 additional authors not shown)
Abstract:
Particle physics has an ambitious and broad experimental programme for the coming decades. This programme requires large investments in detector hardware, either to build new facilities and experiments, or to upgrade existing ones. Similarly, it requires commensurate investment in the R&D of software to acquire, manage, process, and analyse the shear amounts of data to be recorded. In planning for…
▽ More
Particle physics has an ambitious and broad experimental programme for the coming decades. This programme requires large investments in detector hardware, either to build new facilities and experiments, or to upgrade existing ones. Similarly, it requires commensurate investment in the R&D of software to acquire, manage, process, and analyse the shear amounts of data to be recorded. In planning for the HL-LHC in particular, it is critical that all of the collaborating stakeholders agree on the software goals and priorities, and that the efforts complement each other. In this spirit, this white paper describes the R&D activities required to prepare for this software upgrade.
△ Less
Submitted 19 December, 2018; v1 submitted 18 December, 2017;
originally announced December 2017.
-
Spectral Calibration of the Fluorescence Telescopes of the Pierre Auger Observatory
Authors:
The Pierre Auger Collaboration,
A. Aab,
P. Abreu,
M. Aglietta,
I. Al Samarai,
I. F. M. Albuquerque,
I. Allekotte,
A. Almela,
J. Alvarez Castillo,
J. Alvarez-Muñiz,
G. A. Anastasi,
L. Anchordoqui,
B. Andrada,
S. Andringa,
C. Aramo,
F. Arqueros,
N. Arsene,
H. Asorey,
P. Assis,
J. Aublin,
G. Avila,
A. M. Badescu,
A. Balaceanu,
F. Barbato,
R. J. Barreira Luz
, et al. (381 additional authors not shown)
Abstract:
We present a novel method to measure precisely the relative spectral response of the fluorescence telescopes of the Pierre Auger Observatory. We used a portable light source based on a xenon flasher and a monochromator to measure the relative spectral efficiencies of eight telescopes in steps of 5 nm from 280 nm to 440 nm. Each point in a scan had approximately 2 nm FWHM out of the monochromator.…
▽ More
We present a novel method to measure precisely the relative spectral response of the fluorescence telescopes of the Pierre Auger Observatory. We used a portable light source based on a xenon flasher and a monochromator to measure the relative spectral efficiencies of eight telescopes in steps of 5 nm from 280 nm to 440 nm. Each point in a scan had approximately 2 nm FWHM out of the monochromator. Different sets of telescopes in the observatory have different optical components, and the eight telescopes measured represent two each of the four combinations of components represented in the observatory. We made an end-to-end measurement of the response from different combinations of optical components, and the monochromator setup allowed for more precise and complete measurements than our previous multi-wavelength calibrations. We find an overall uncertainty in the calibration of the spectral response of most of the telescopes of 1.5% for all wavelengths; the six oldest telescopes have larger overall uncertainties of about 2.2%. We also report changes in physics measureables due to the change in calibration, which are generally small.
△ Less
Submitted 2 October, 2017; v1 submitted 5 September, 2017;
originally announced September 2017.
-
Muon Counting using Silicon Photomultipliers in the AMIGA detector of the Pierre Auger Observatory
Authors:
The Pierre Auger Collaboration,
A. Aab,
P. Abreu,
M. Aglietta,
E. J. Ahn,
I. Al Samarai,
I. F. M. Albuquerque,
I. Allekotte,
P. Allison,
A. Almela,
J. Alvarez Castillo,
J. Alvarez-Muñiz,
M. Ambrosio,
G. A. Anastasi,
L. Anchordoqui,
B. Andrada,
S. Andringa,
C. Aramo,
F. Arqueros,
N. Arsene,
H. Asorey,
P. Assis,
J. Aublin,
G. Avila,
A. M. Badescu
, et al. (400 additional authors not shown)
Abstract:
AMIGA (Auger Muons and Infill for the Ground Array) is an upgrade of the Pierre Auger Observatory designed to extend its energy range of detection and to directly measure the muon content of the cosmic ray primary particle showers. The array will be formed by an infill of surface water-Cherenkov detectors associated with buried scintillation counters employed for muon counting. Each counter is com…
▽ More
AMIGA (Auger Muons and Infill for the Ground Array) is an upgrade of the Pierre Auger Observatory designed to extend its energy range of detection and to directly measure the muon content of the cosmic ray primary particle showers. The array will be formed by an infill of surface water-Cherenkov detectors associated with buried scintillation counters employed for muon counting. Each counter is composed of three scintillation modules, with a 10 m$^2$ detection area per module. In this paper, a new generation of detectors, replacing the current multi-pixel photomultiplier tube (PMT) with silicon photo sensors (aka. SiPMs), is proposed. The selection of the new device and its front-end electronics is explained. A method to calibrate the counting system that ensures the performance of the detector is detailed. This method has the advantage of being able to be carried out in a remote place such as the one where the detectors are deployed. High efficiency results, i.e. 98 % efficiency for the highest tested overvoltage, combined with a low probability of accidental counting ($\sim$2 %), show a promising performance for this new system.
△ Less
Submitted 4 October, 2017; v1 submitted 17 March, 2017;
originally announced March 2017.
-
Plasma effect in Silicon Charge Coupled Devices (CCDs)
Authors:
Juan Estrada,
Jorge Molina,
J. Blostein,
G. Fernandez
Abstract:
Plasma effect is observed in CCDs exposed to heavy ionizing alpha-particles with energies in the range 0.5 - 5.5 MeV. The results obtained for the size of the charge clusters reconstructed on the CCD pixels agrees with previous measurements in the high energy region (>3.5 MeV). The measurements were extended to lower energies using alpha-particles produced by (n,alpha) reactions of neutrons in a B…
▽ More
Plasma effect is observed in CCDs exposed to heavy ionizing alpha-particles with energies in the range 0.5 - 5.5 MeV. The results obtained for the size of the charge clusters reconstructed on the CCD pixels agrees with previous measurements in the high energy region (>3.5 MeV). The measurements were extended to lower energies using alpha-particles produced by (n,alpha) reactions of neutrons in a Boron-10 target. The effective linear charge density for the plasma column is measured as a function of energy. The results demonstrate the potential for high position resolution in the reconstruction of alpha particles, which opens an interesting possibility for using these detectors in neutron imaging applications.
△ Less
Submitted 28 May, 2011; v1 submitted 16 May, 2011;
originally announced May 2011.
-
Hyperthermia HeLa cell treatment with silica coated manganese oxide nanoparticles
Authors:
A Villanueva,
P de la Presa,
JM Alonso,
T Rueda,
A Martinez,
P Crespo,
MP Morales,
MA Gonzalez Fernandez,
J Valdes,
G Rivero
Abstract:
The effect of a high frequency alternating magnetic field on HeLa tumour cells incubated with ferromagnetic nanoparticles of manganese oxide perovskite La0.56(SrCa)0.22MnO3 have been studied. The particles were subjected to a size selection process and coated with silica to improve their biocompatibility. The control assays made with HeLa tumour cells showed that cell survival and growth rate we…
▽ More
The effect of a high frequency alternating magnetic field on HeLa tumour cells incubated with ferromagnetic nanoparticles of manganese oxide perovskite La0.56(SrCa)0.22MnO3 have been studied. The particles were subjected to a size selection process and coated with silica to improve their biocompatibility. The control assays made with HeLa tumour cells showed that cell survival and growth rate were not affected by the particle internalization in cells, or by the electromagnetic field on cells without nanoparticles. However, the application of an alternating electromagnetic field to cells incubated with this silica coated manganese oxide induced a significant cellular damage that finally lead to cell death by an apoptotic mechanism. Cell death is triggered even thought the temperature increase in the cell culture during the hyperthermia treatment is lower than 0.5 C.
△ Less
Submitted 21 November, 2009; v1 submitted 19 July, 2009;
originally announced July 2009.
-
Transport Properties of Anisotropic Polar Fluids:2. Dipolar Interaction
Authors:
G. A. Fernandez,
J. Vrabec,
H. Hasse
Abstract:
Equilibrium molecular dynamics simulation and the Green-Kubo formalism were used to calculate self-diffusion coefficient, shear viscosity, and thermal conductivity for 38 different dipolar two-center Lennard-Jones fluids along the bubble line and in the homogeneous liquid. It was systematically investigated how anisotropy, i.e. elongation, and dipole momentum influence the transport properties.…
▽ More
Equilibrium molecular dynamics simulation and the Green-Kubo formalism were used to calculate self-diffusion coefficient, shear viscosity, and thermal conductivity for 38 different dipolar two-center Lennard-Jones fluids along the bubble line and in the homogeneous liquid. It was systematically investigated how anisotropy, i.e. elongation, and dipole momentum influence the transport properties. The reduced elongation L* was varied from 0 to 1 and the reduced squared dipole momentum was varied depending on the elongation as follows: for spherical fluids (L*=0) from $μ*2=0 to 20, for L*=0.2 from mu*2=0 to 16, and for L*=0.4 and above from mu*2=0 to 12. This represents the entire range in which parameters for real fluids are expected. The statistical uncertainty of the reported data varies with transport property, for self-diffusion coefficient data the error bars are typically lower than 3 %, for shear viscosity and thermal conductivity they are about 8 and 12 %, respectively.
△ Less
Submitted 17 June, 2009;
originally announced June 2009.
-
Transport Properties of Anisotropic Polar Fluids: 1. Quadrupolar Interaction
Authors:
G. A. Fernandez,
J. Vrabec,
H. Hasse
Abstract:
Equilibrium molecular dynamics simulation and the Green-Kubo formalism were used to calculate self-diffusion coefficient, shear viscosity,and thermal conductivity for 30 different quadrupolar two-center Lennard-Jones fluids along the bubble line and in the homogeneous liquid. It was systematically investigated how anisotropy, i.e. elongation, and quadrupole momentum influence the transport prope…
▽ More
Equilibrium molecular dynamics simulation and the Green-Kubo formalism were used to calculate self-diffusion coefficient, shear viscosity,and thermal conductivity for 30 different quadrupolar two-center Lennard-Jones fluids along the bubble line and in the homogeneous liquid. It was systematically investigated how anisotropy, i.e. elongation, and quadrupole momentum influence the transport properties. The reduced elongation L* was varied from 0 to 0.8 and the reduced squared quadrupole momentum Q*2 from 0 to 4, i.e. in the entire range in which parameters for real fluids are expected. The statistical uncertainty of the reported data varies with transport property, for self-diffusion coefficient data the error bars are typically lower than 3 %, for shear viscosity and thermal conductivity they are about 8 and 12 %, respectively.
△ Less
Submitted 17 June, 2009;
originally announced June 2009.
-
A molecular simulation study of shear and bulk viscosity and thermal conductivity of simple real fluids
Authors:
G. A. Fernandez,
J. Vrabec,
H. Hasse
Abstract:
Shear and bulk viscosity and thermal conductivity for argon, krypton, xenon, and methane and the binary mixtures argon+krypton and argon+methane were determined by equilibrium molecular dynamics with the Green-Kubo method. The fluids were modeled by spherical Lennard-Jones pair-potentials with parameters adjusted to experimental vapor liquid-equilibria data alone. Good agreement between the pred…
▽ More
Shear and bulk viscosity and thermal conductivity for argon, krypton, xenon, and methane and the binary mixtures argon+krypton and argon+methane were determined by equilibrium molecular dynamics with the Green-Kubo method. The fluids were modeled by spherical Lennard-Jones pair-potentials with parameters adjusted to experimental vapor liquid-equilibria data alone. Good agreement between the predictions from simulation and experimental data is found for shear viscosity and thermal conductivity of the pure fluids and binary mixtures. The simulation results for the bulk viscosity show only poor agreement with experimental data for most fluids, despite good agreement with other simulations data from the literature. This indicates that presently available experimental data for the bulk viscosity, a property which is difficult to measure, are inaccurate.
△ Less
Submitted 9 June, 2009;
originally announced June 2009.
-
Self diffusion and binary Maxwell-Stefan diffusion in simple fluids with the Green-Kubo method
Authors:
G. A. Fernandez,
J. Vrabec,
H. Hasse
Abstract:
Self diffusion coefficients and binary Maxwell-Stefan diffusion coefficients were determined by equilibrium molecular dynamics simulations with the Green-Kubo method. The study covers five pure fluids: neon, argon, krypton, xenon, and methane and three binary mixtures: argon+krypton, argon+xenon, and krypton+xenon. The fluids are modeled by spherical Lennard-Jones air-potentials, with parameters…
▽ More
Self diffusion coefficients and binary Maxwell-Stefan diffusion coefficients were determined by equilibrium molecular dynamics simulations with the Green-Kubo method. The study covers five pure fluids: neon, argon, krypton, xenon, and methane and three binary mixtures: argon+krypton, argon+xenon, and krypton+xenon. The fluids are modeled by spherical Lennard-Jones air-potentials, with parameters which were determined solely on the basis of vapor-liquid equilibria data. The predictions of the self diffusion coefficients agree within 5% for gas state points and about 10% for liquid state points. The Maxwell-Stefan diffusion coefficients are predicted within 10%. A test of Darken's model shows good agreement.
△ Less
Submitted 29 April, 2009;
originally announced April 2009.
-
Role of transport performance on neuron cell morphology
Authors:
E. Louis C. Degli Esposti Boschi G. J. Ortega E. Fernandez
Abstract:
The compartmental model is a basic tool for studying signal propagation in neurons, and, if the model parameters are adequately defined, it can also be of help in the study of electrical or fluid transport. Here we show that the input resistance, in different networks which simulate the passive properties of neurons, is the result of an interplay between the relevant conductances, morphology and…
▽ More
The compartmental model is a basic tool for studying signal propagation in neurons, and, if the model parameters are adequately defined, it can also be of help in the study of electrical or fluid transport. Here we show that the input resistance, in different networks which simulate the passive properties of neurons, is the result of an interplay between the relevant conductances, morphology and size. These results suggest that neurons must grow in such a way that facilitates the current flow. We propose that power consumption is an important factor by which neurons attain their final morphological appearance.
△ Less
Submitted 5 October, 2005;
originally announced October 2005.
