-
Optomechanical cavities based on epitaxial GaP on nominally (001)-oriented Si
Authors:
Paula Mouriño,
Laura Mercadé,
Miguel Sinusía Lozano,
Raquel Resta,
Amadeu Griol,
Karim Ben Saddik,
Enrique Barrigón,
Sergio Fernández-Garrido,
Basilio Javier García,
Alejandro Martínez,
Víctor J. Gómez
Abstract:
Gallium phosphide (GaP) has recently received considerable attention as a suitable material for building photonic integrated circuits due to its remarkable optical and piezoelectric properties. Usually, GaP is grown epitaxially on III-V substrates to keep its crystallinity and later transferred to silicon wafers for further processing. Here, an alternative promising route for the fabrication of op…
▽ More
Gallium phosphide (GaP) has recently received considerable attention as a suitable material for building photonic integrated circuits due to its remarkable optical and piezoelectric properties. Usually, GaP is grown epitaxially on III-V substrates to keep its crystallinity and later transferred to silicon wafers for further processing. Here, an alternative promising route for the fabrication of optomechanical (OM) cavities on GaP epitaxially grown on nominally (001)-oriented Si is introduced by using a two-step process consisting of a low-temperature etching of GaP followed by selective etching of the underneath silicon. The low-temperature (-30 $^o$C) during the dry-etching of GaP hinders the lateral etching rate, preserving the pattern with a deviation between the design and the pattern in the GaP layer lower than 5 %, avoiding the complex process of transferring and bonding a GaP wafer to a silicon-on-insulator wafer. To demonstrate the quality and feasibility of the proposed fabrication route, suspended OM cavities are fabricated and experimentally characterized. The cavities show optical quality factors between 10$^3$ and 10$^4$, and localized mechanical resonances at frequencies around 3.1 GHz. Both optical and mechanical resonances are close to those previously reported on crystalline GaP structures. These results suggest a simple and low-cost way to build GaP-based photonic devices directly integrated on industry-standard Si(001) photonic wafers.
△ Less
Submitted 28 March, 2024;
originally announced March 2024.
-
In situ investigation of growth modes during plasma-assisted molecular beam epitaxy of (0001)GaN
Authors:
G. Koblmüller,
S. Fernández-Garrido,
E. Calleja,
J. S. Speck
Abstract:
Real-time analysis of the growth modes during homoepitaxial (0001)GaN growth by plasma-assisted molecular beam epitaxy was performed using reflection high energy electron diffraction. A growth mode map was established as a function of Ga/N flux ratio and growth temperature, exhibiting distinct transitions between three-dimensional (3D), layer-by-layer and step-flow growth mode. The layer-by-layer…
▽ More
Real-time analysis of the growth modes during homoepitaxial (0001)GaN growth by plasma-assisted molecular beam epitaxy was performed using reflection high energy electron diffraction. A growth mode map was established as a function of Ga/N flux ratio and growth temperature, exhibiting distinct transitions between three-dimensional (3D), layer-by-layer and step-flow growth mode. The layer-by-layer to step-flow growth transition under Ga-rich growth was surfactant mediated and related to a Ga adlayer coverage of one monolayer. Under N-rich conditions the transition from 3D to layer-by-layer growth was predominantly thermally activated, facilitating two-dimensional growth at temperatures of thermal decomposition.
△ Less
Submitted 30 January, 2024;
originally announced January 2024.
-
A comprehensive diagram to grow InAlN alloys by plasma-assisted molecular beam epitaxy
Authors:
S. Fernández-Garrido,
Ž. Gačević,
E. Calleja
Abstract:
Indium incorporation and surface morphology of InAlN layers grown on (0001)GaN by plasma-assisted molecular beam epitaxy were investigated as a function of the impinging In flux and the substrate temperature in the 450-610$^{\circ}$C range. In incorporation was found to decrease with substrate temperature due to thermal decomposition of the growing layer, while for a given temperature it increased…
▽ More
Indium incorporation and surface morphology of InAlN layers grown on (0001)GaN by plasma-assisted molecular beam epitaxy were investigated as a function of the impinging In flux and the substrate temperature in the 450-610$^{\circ}$C range. In incorporation was found to decrease with substrate temperature due to thermal decomposition of the growing layer, while for a given temperature it increased with the impinging In flux until stoichiometry was reached at the growth front. The InN losses during growth followed an Arrhenius behaviour characterized by an activation energy of 2.0 eV. A growth diagram highly instrumental to identify optimum growth conditions was established.
△ Less
Submitted 30 January, 2024;
originally announced January 2024.
-
Observation of dielectrically confined excitons in ultrathin GaN nanowires up to room temperature
Authors:
Johannes K. Zettler,
Pierre Corfdir,
Christian Hauswald,
Esperanza Luna,
Uwe Jahn,
Timur Flissikowski,
Emanuel Schmidt,
Carsten Ronning,
Achim Trampert,
Lutz Geelhaar,
Holger T. Grahn,
Oliver Brandt,
Sergio Fernández-Garrido
Abstract:
The realization of semiconductor structures with stable excitons at room temperature is crucial for the development of excitonics and polaritonics. Quantum confinement has commonly been employed for enhancing excitonic effects in semiconductor heterostructures. Dielectric confinement, which is potentially much stronger, has proven to be more difficult to achieve because of the rapid nonradiative s…
▽ More
The realization of semiconductor structures with stable excitons at room temperature is crucial for the development of excitonics and polaritonics. Quantum confinement has commonly been employed for enhancing excitonic effects in semiconductor heterostructures. Dielectric confinement, which is potentially much stronger, has proven to be more difficult to achieve because of the rapid nonradiative surface/interface recombination in hybrid dielectric-semiconductor structures. Here, we demonstrate intense excitonic emission from bare GaN nanowires with diameters down to 6 nm. The large dielectric mismatch between the nanowires and vacuum greatly enhances the Coulomb interaction, with the thinnest nanowires showing the strongest dielectric confinement and the highest radiative efficiency at room temperature. In situ monitoring of the fabrication of these structures allows one to accurately control the degree of dielectric enhancement. These ultrathin nanowires may constitute the basis for the fabrication of advanced low-dimensional structures with an unprecedented degree of confinement.
△ Less
Submitted 30 January, 2024;
originally announced January 2024.
-
Polarity-induced selective area epitaxy of GaN nanowires
Authors:
Ziani de Souza Schiaber,
Gabriele Calabrese,
Xiang Kong,
Achim Trampert,
Bernd Jenichen,
José Humberto Dias da Silva,
Lutz Geelhaar,
Oliver Brandt,
Sergio Fernández-Garrido
Abstract:
We present a conceptually novel approach to achieve selective area epitaxy of GaN nanowires. The approach is based on the fact that these nanostructures do not form in plasma-assisted molecular beam epitaxy on structurally and chemically uniform cation-polar substrates. By in situ depositing and nitridating Si on a Ga-polar GaN film, we locally reverse the polarity to induce the selective area epi…
▽ More
We present a conceptually novel approach to achieve selective area epitaxy of GaN nanowires. The approach is based on the fact that these nanostructures do not form in plasma-assisted molecular beam epitaxy on structurally and chemically uniform cation-polar substrates. By in situ depositing and nitridating Si on a Ga-polar GaN film, we locally reverse the polarity to induce the selective area epitaxy of N-polar GaN nanowires. We show that the nanowire number density can be controlled over several orders of magnitude by varying the amount of pre-deposited Si. Using this growth approach, we demonstrate the synthesis of single-crystalline and uncoalesced nanowires with diameters as small as 20 nm. The achievement of nanowire number densities low enough to prevent the shadowing of the nanowire sidewalls from the impinging fluxes paves the way for the realization of homogeneous core-shell heterostructures without the need of using ex situ pre-patterned substrates.
△ Less
Submitted 29 January, 2024;
originally announced January 2024.
-
A growth diagram for plasma-assisted molecular beam epitaxy of GaN nanocolumns on Si(111)
Authors:
S. Fernández-Garrido,
J. Grandal,
E. Calleja,
M. A. Sánchez-García,
D. López-Romero
Abstract:
The morphology of GaN samples grown by plasma-assisted molecular beam epitaxy on Si(111) was systematically studied as a function of impinging Ga/N flux ratio and growth temperature (750-850°C).Two different growth regimes were identified: compact and nanocolumnar. A growth diagram was established as a function of growth parameters, exhibiting the transition between growth regimes, and showing und…
▽ More
The morphology of GaN samples grown by plasma-assisted molecular beam epitaxy on Si(111) was systematically studied as a function of impinging Ga/N flux ratio and growth temperature (750-850°C).Two different growth regimes were identified: compact and nanocolumnar. A growth diagram was established as a function of growth parameters, exhibiting the transition between growth regimes, and showing under which growth conditions GaN cannot be grown due to thermal decomposition and Ga desorption. Present results indicate that adatoms diffusion length and the actual Ga/N ratio on the growing surface are key factors to achieve nanocolumnar growth.
△ Less
Submitted 29 January, 2024;
originally announced January 2024.
-
Interface recombination in Ga- and N-polar GaN/(Al,Ga)N quantum wells grown by molecular beam epitaxy
Authors:
Thomas Auzelle,
Chiara Sinito,
Jonas Lähnemann,
Guanhui Gao,
Timur Flissikowski,
Achim Trampert,
Sergio Fernández-Garrido,
Oliver Brandt
Abstract:
We explore and systematically compare the morphological, structural and optical properties of GaN/(Al,Ga)N multiple quantum wells (MQWs) grown by plasma-assisted molecular beam epitaxy (PA-MBE) on freestanding GaN$(0001)$ and GaN$(000\bar{1})$ substrates. Samples of different polarity are found to be comparable in terms of their morphological and structural perfection and exhibit essentially ident…
▽ More
We explore and systematically compare the morphological, structural and optical properties of GaN/(Al,Ga)N multiple quantum wells (MQWs) grown by plasma-assisted molecular beam epitaxy (PA-MBE) on freestanding GaN$(0001)$ and GaN$(000\bar{1})$ substrates. Samples of different polarity are found to be comparable in terms of their morphological and structural perfection and exhibit essentially identical quantum well widths and Al content. Regardless of the crystal orientation, the exciton decay in the MQWs at 10 K is dominantly radiative and the photoluminescence (PL) energy follows the quantum confined Stark effect (QCSE) for different quantum well widths. A prominent free-to-bound transition involving interface shallow donors is, however, visible for the N-polar MQWs. At room-temperature, in contrast, the exciton decay in all samples is dominated by nonradiative recombination taking place at point defects, presumably Ca or V N located at the bottom QW interface. Remarkably, the N-polar MQWs exhibit a higher PL intensity and longer decay times than the Ga-polar MQWs at room-temperature. This improved internal quantum efficiency is attributed to the beneficial orientation of the internal electric field that effectively reduces the capture rate of minority carriers by interface trap states.
△ Less
Submitted 13 May, 2022; v1 submitted 25 November, 2021;
originally announced November 2021.
-
External control of GaN band bending using phosphonate self-assembled monolayers
Authors:
T. Auzelle,
F. Ullrich,
S. Hietzschold,
C. Sinito,
S. Brackmann,
W. Kowalsky,
E. Mankel,
O. Brandt,
R. Lovrincic,
S. Fernández-Garrido
Abstract:
We report on the optoelectronic properties of GaN$(0001)$ and $(1\bar{1}00)$ surfaces after their functionalization with phosphonic acid derivatives. To analyze the possible correlation between the acid's electronegativity and the GaN surface band bending, two types of phosphonic acids, n-octylphosphonic acid (OPA) and 1H,1H,2H,2H-perfluorooctanephosphonic acid (PFOPA), are grafted on oxidized GaN…
▽ More
We report on the optoelectronic properties of GaN$(0001)$ and $(1\bar{1}00)$ surfaces after their functionalization with phosphonic acid derivatives. To analyze the possible correlation between the acid's electronegativity and the GaN surface band bending, two types of phosphonic acids, n-octylphosphonic acid (OPA) and 1H,1H,2H,2H-perfluorooctanephosphonic acid (PFOPA), are grafted on oxidized GaN$(0001)$ and GaN$(1\bar{1}00)$ layers as well as on GaN nanowires. The resulting hybrid inorganic/organic heterostructures are investigated by X-ray photoemission and photoluminescence spectroscopy. The GaN work function is changed significantly by the grafting of phosphonic acids, evidencing the formation of dense self-assembled monolayers. Regardless of the GaN surface orientation, both types of phosphonic acids significantly impact the GaN surface band bending. A dependence on the acids' electronegativity is, however, only observed for the oxidized GaN$(1\bar{1}00)$ surface, indicating a relatively low density of surface states and a favorable band alignment between the surface oxide and acids' electronic states. Regarding the optical properties, the covalent bonding of PFOPA and OPA on oxidized GaN layers and nanowires significantly affect their external quantum efficiency, especially in the nanowire case due to the large surface-to-volume ratio. The variation in the external quantum efficiency is related to the modication of both the internal electric fields and surface states. These results demonstrate the potential of phosphonate chemistry for the surface functionalization of GaN, which could be exploited for selective sensing applications.
△ Less
Submitted 25 September, 2020;
originally announced September 2020.
-
Radius-Dependent Homogeneous Strain in Uncoalesced GaN Nanowires
Authors:
G. Calabrese,
D. van Treeck,
V. M. Kaganer,
O. Konovalov,
P. Corfdir,
C. Sinito,
L. Geelhaar,
O. Brandt,
S. Fernández-Garrido
Abstract:
We investigate the strain state of ensembles of thin and nearly coalescence-free self-assembled GaN nanowires prepared by plasma-assisted molecular beam epitaxy on Ti/Al$_{2}$O$_{3}(0001)$ substrates. The shifts of Bragg peaks in high-resolution X-ray diffraction profiles reveal the presence of a homogeneous tensile strain in the out-of-plane direction. This strain is inversely proportional to the…
▽ More
We investigate the strain state of ensembles of thin and nearly coalescence-free self-assembled GaN nanowires prepared by plasma-assisted molecular beam epitaxy on Ti/Al$_{2}$O$_{3}(0001)$ substrates. The shifts of Bragg peaks in high-resolution X-ray diffraction profiles reveal the presence of a homogeneous tensile strain in the out-of-plane direction. This strain is inversely proportional to the average nanowire radius and results from the surface stress acting on the nanowire sidewalls. The superposition of strain from nanowires with different radii in the same ensemble results in a broadening of the Bragg peaks that mimics an inhomogeneous strain on a macroscopic scale. The nanowire ensembles show a small blueshift of the bound-exciton transitions in photoluminescence spectra, reflecting the existence of a compensating in-plane compressive strain, as further supported by grazing incidence x-ray diffraction measurements carried out at a synchrotron. By combining X-ray diffraction and photoluminescence spectroscopy, the surface stress components $f_{x}$ and $f_{z}$ of the air-exposed GaN$\{1\bar100\}$ planes that constitute the nanowire sidewalls are determined experimentally to be 2.25 and $-0.7$~N/m, respectively.
△ Less
Submitted 22 February, 2020;
originally announced February 2020.
-
Enhanced radiative efficiency in GaN nanowires grown on sputtered TiN$_{\boldsymbol{x}}$: effects of surface electric fields
Authors:
T. Auzelle,
M. Azadmand,
T. Flissikowski,
M. Ramsteiner,
K. Morgenroth,
C. Stemmler,
S. Fernández-Garrido,
S. Sanguinetti,
H. T. Grahn,
L. Geelhaar,
O. Brandt
Abstract:
GaN nanowires grown by molecular beam epitaxy generally suffer from dominant nonradiative recombination, which is believed to originate from point defects. To suppress the formation of these defects, we explore the synthesis of GaN nanowires at temperatures up to 915 $°C$ enabled by the use of thermally stable TiN$_x$/Al$_2$O$_3$ substrates. These samples exhibit indeed bound exciton decay times a…
▽ More
GaN nanowires grown by molecular beam epitaxy generally suffer from dominant nonradiative recombination, which is believed to originate from point defects. To suppress the formation of these defects, we explore the synthesis of GaN nanowires at temperatures up to 915 $°C$ enabled by the use of thermally stable TiN$_x$/Al$_2$O$_3$ substrates. These samples exhibit indeed bound exciton decay times approaching those measured for state-of-the-art bulk GaN. However, the decay time is not correlated with the growth temperature, but rather with the nanowire diameter. The inverse dependence of the decay time on diameter suggests that the nonradiative process in GaN nanowires is not controlled by the defect density, but by the field ionization of excitons in the radial electric field caused by surface band bending. We propose a unified mechanism accounting for nonradiative recombination in GaN nanowires of arbitrary diameter.
△ Less
Submitted 4 February, 2021; v1 submitted 17 January, 2020;
originally announced January 2020.
-
Electronic properties of air-exposed GaN$(1\bar{1}00)$ and $(0001)$ surfaces after several device processing compatible cleaning steps
Authors:
Thomas Auzelle,
Florian Ullrich,
Sebastian Hietzschold,
Stefan Brackmann,
Sabina Hillebrandt,
Wolfgang Kowalsky,
Eric Mankel,
Robert Lovrincic,
Sergio Fernández-Garrido
Abstract:
We report on the electronic properties of GaN$(1\bar{1}00)$ and $(0001)$ surfaces after three different and subsequent device processing compatible cleaning steps: HCl etching, annealing at $400$ $^\circ$C in N$_2$ atmosphere, and O$_2$ plasma exposure. The surface electronic properties are quantified, in the dark and under ultraviolet illumination, using X-ray photoelectron spectroscopy and a Kel…
▽ More
We report on the electronic properties of GaN$(1\bar{1}00)$ and $(0001)$ surfaces after three different and subsequent device processing compatible cleaning steps: HCl etching, annealing at $400$ $^\circ$C in N$_2$ atmosphere, and O$_2$ plasma exposure. The surface electronic properties are quantified, in the dark and under ultraviolet illumination, using X-ray photoelectron spectroscopy and a Kelvin probe. We find that the cleaning steps largely affect the work function and the band bending of both GaN orientations. These modifications are attributed to the presence of different surface states as well as to the formation of adsorbates building up distinct surface dipoles. Besides these results, we detect that under ultraviolet illumination the work function of the surfaces exposed to HCl decreases by at least $0.2$ eV without screening of the band bending. We thus attribute the observed surface photovoltage to a photo-induced modification of the surface dipole. Overall, these results emphasize the strong dependence of the electronic properties of air-exposed GaN surfaces on adsorbates. As a result, we advocate the use of the common cleaning steps analyzed here to re-initialize at will GaN$(1\bar{1}00)$ and $(0001)$ surfaces into pre-defined states.
△ Less
Submitted 9 August, 2019;
originally announced August 2019.
-
Influence of the source arrangement on shell growth around GaN nanowires in molecular beam epitaxy
Authors:
David van Treeck,
Sergio Fernández-Garrido,
Lutz Geelhaar
Abstract:
In a combined experimental and theoretical study, we investigate the influence of the material source arrangement in a molecular beam epitaxy (MBE) system on the growth of nanowire (NW) core-shell structures. In particular, we study the shell growth of GaN around GaN template NWs under the boundary condition that Ga and N do not impinge on a given sidewall facet at the same time. Our experiments w…
▽ More
In a combined experimental and theoretical study, we investigate the influence of the material source arrangement in a molecular beam epitaxy (MBE) system on the growth of nanowire (NW) core-shell structures. In particular, we study the shell growth of GaN around GaN template NWs under the boundary condition that Ga and N do not impinge on a given sidewall facet at the same time. Our experiments with different V/III ratios and substrate temperatures show that obtaining shells with homogeneous thickness along the whole NW length is not straightforward. Analyzing in detail the shell morphology with and without substrate rotation, we find that the different azimuthal angles of the sources have a major impact on the Ga adatom kinetics and the final shell morphology. On the basis of these experimental results, we develop a diffusion model which takes into account different NW facets and the substrate. The model allows to describe well the experimental shell profiles and predicts that homogeneous shell growth can be achieved if the Ga and N source are arranged next to each other or for very high rotation speeds. Moreover, the modeling reveals that the growth on a given side facet can be categorized within one rotation in four different phases: the Ga wetting phase, the metal-rich growth phase, the N-rich growth phase, and the dissociation phase. The striking difference to growth processes on planar samples is that, in our case, diffusion takes place between different regions, i.e. the sidewall vs. the top facet and substrate, out of which on one N impinges not continuously, resulting in complex gradients in chemical potential that are modulated in time by substrate rotation. The comprehensiveness of our model provides a deep understanding of diffusion processes and the resulting adatom concentration, and could be applied to other 3D structures and material systems
△ Less
Submitted 13 December, 2019; v1 submitted 24 July, 2019;
originally announced July 2019.
-
Top-down fabrication of ordered arrays of GaN nanowires by selective area sublimation
Authors:
Sergio Fernández-Garrido,
Thomas Auzelle,
Jonas Lähnemann,
Kilian Wimmer,
Abbes Tahraoui,
Oliver Brandt
Abstract:
We demonstrate the top-down fabrication of ordered arrays of GaN nanowires by selective area sublimation of pre-patterned GaN(0001) layers grown by hydride vapor phase epitaxy on Al$_{2}$O$_{3}$. Arrays with nanowire diameters and spacings ranging from 50 to 90 nm and 0.1 to 0.7 $μ$m, respectively, are simultaneously produced under identical conditions. The sublimation process, carried out under h…
▽ More
We demonstrate the top-down fabrication of ordered arrays of GaN nanowires by selective area sublimation of pre-patterned GaN(0001) layers grown by hydride vapor phase epitaxy on Al$_{2}$O$_{3}$. Arrays with nanowire diameters and spacings ranging from 50 to 90 nm and 0.1 to 0.7 $μ$m, respectively, are simultaneously produced under identical conditions. The sublimation process, carried out under high vacuum conditions, is analyzed \emph{in situ} by reflection high-energy electron diffraction and line-of-sight quadrupole mass spectromety. During the sublimation process, the GaN(0001) surface vanishes, giving way to the formation of semi-polar $\lbrace1\bar{1}03\rbrace$ facets which decompose congruently following an Arrhenius temperature dependence with an activation energy of ($3.54 \pm 0.07$) eV and an exponential prefactor of $1.58\times10^{31}$ atoms cm$^{-2}$ s$^{-1}$. The analysis of the samples by low-temperature cathodoluminescence spectroscopy reveals that, in contrast to dry etching, the sublimation process does not introduce nonradiative recombination centers at the nanowire sidewalls. This technique is suitable for the top-down fabrication of a variety of ordered nanostructures, and could possibly be extended to other material systems with similar crystallographic properties such as ZnO.
△ Less
Submitted 13 May, 2019;
originally announced May 2019.
-
Absence of quantum-confined Stark effect in GaN quantum disks embedded in (Al,Ga)N nanowires grown by molecular beam epitaxy
Authors:
C. Sinito,
P. Corfdir,
C. Pfüller,
G. Gao,
J. Bartolomé Vílchez,
S. Kölling,
A. Rodil Doblado,
U. Jahn,
J. Lähnemann,
T. Auzelle,
J. K. Zettler,
T. Flissikowski,
P. Koenraad,
H. T. Grahn,
L. Geelhaar,
S. Fernández-Garrido,
O. Brandt
Abstract:
Several of the key issues of planar (Al,Ga)N-based deep-ultraviolet light emitting diodes could potentially be overcome by utilizing nanowire heterostructures, exhibiting high structural perfection and improved light extraction. Here, we study the spontaneous emission of GaN/(Al,Ga)N nanowire ensembles grown on Si(111) by plasma-assisted molecular beam epitaxy. The nanowires contain single GaN qua…
▽ More
Several of the key issues of planar (Al,Ga)N-based deep-ultraviolet light emitting diodes could potentially be overcome by utilizing nanowire heterostructures, exhibiting high structural perfection and improved light extraction. Here, we study the spontaneous emission of GaN/(Al,Ga)N nanowire ensembles grown on Si(111) by plasma-assisted molecular beam epitaxy. The nanowires contain single GaN quantum disks embedded in long (Al,Ga)N nanowire segments essential for efficient light extraction. These quantum disks are found to exhibit intense emission at unexpectedly high energies, namely, significantly above the GaN bandgap, and almost independent of the disk thickness. An in-depth investigation of the actual structure and composition of the nanowires reveals a spontaneously formed Al gradient both along and across the nanowire, resulting in a complex core/shell structure with an Al deficient core and an Al rich shell with continuously varying Al content along the entire length of the (Al,Ga)N segment. This compositional change along the nanowire growth axis induces a polarization doping of the shell that results in a degenerate electron gas in the disk, thus screening the built-in electric fields. The high carrier density not only results in the unexpectedly high transition energies, but also in radiative lifetimes depending only weakly on temperature, leading to a comparatively high internal quantum efficiency of the GaN quantum disks up to room temperature.
△ Less
Submitted 8 August, 2019; v1 submitted 10 May, 2019;
originally announced May 2019.
-
Self-Assembled formation of long, thin, and uncoalesced GaN nanowires on crystalline TiN films
Authors:
David van Treeck,
Gabriele Calabrese,
Jelle J. W. Goertz,
Vladimir M. Kaganer,
Oliver Brandt,
Sergio Fernández-Garrido,
Lutz Geelhaar
Abstract:
We investigate in detail the self-assembled nucleation and growth of GaN nanowires by molecular beam epitaxy on crystalline TiN films. We demonstrate that this type of substrate allows the growth of long and thin GaN nanowires that do not suffer from coalescence, which is in contrast to the growth on Si and other substrates. Only beyond a certain nanowire length that depends on the nanowire number…
▽ More
We investigate in detail the self-assembled nucleation and growth of GaN nanowires by molecular beam epitaxy on crystalline TiN films. We demonstrate that this type of substrate allows the growth of long and thin GaN nanowires that do not suffer from coalescence, which is in contrast to the growth on Si and other substrates. Only beyond a certain nanowire length that depends on the nanowire number density and exceeds here 1.5 μm, coalescence takes place by bundling, i.e. the same process as on Si. By analyzing the nearest neighbor distance distribution, we identify diffusion-induced repulsion of neighboring nanowires as the main mechanism limiting the nanowire number density during nucleation on TiN. Since on Si the final number density is determined by shadowing of the impinging molecular beams by existing nanowires, it is the difference in adatom surface diffusion that enables on TiN the formation of nanowire ensembles with reduced number density. These nanowire ensembles combine properties that make them a promising basis for the growth of core-shell heterostructures.
△ Less
Submitted 9 January, 2018;
originally announced January 2018.
-
Statistical analysis of the shape of one-dimensional nanostructures: determining the coalescence degree of spontaneously formed GaN nanowires
Authors:
Oliver Brandt,
Sergio Fernández-Garrido,
Johannes K. Zettler,
Esperanza Luna,
Uwe Jahn,
Caroline Chèze,
Vladimir M. Kaganer
Abstract:
Single GaN nanowires formed spontaneously on a given substrate represent nanoscopic single crystals free of any extended defects. However, due to the high area density of thus formed GaN nanowire ensembles, individual nanowires coalesce with others in their immediate vicinity. This coalescence process may introduce strain and structural defects, foiling the idea of defect-free material due to the…
▽ More
Single GaN nanowires formed spontaneously on a given substrate represent nanoscopic single crystals free of any extended defects. However, due to the high area density of thus formed GaN nanowire ensembles, individual nanowires coalesce with others in their immediate vicinity. This coalescence process may introduce strain and structural defects, foiling the idea of defect-free material due to the nanowire geometry. To investigate the consequences of this process, a quantitative measure of the coalescence of nanowire ensembles is required. We derive objective criteria to determine the coalescence degree of GaN nanowire ensembles. These criteria are based on the area-perimeter relationship of the cross-sectional shapes observed, and in particular on their circularity. Employing these criteria, we distinguish single nanowires from coalesced aggregates in an ensemble, determine the diameter distribution of both, and finally analyze the coalescence degree of nanowire ensembles with increasing fill factor.
△ Less
Submitted 15 April, 2014; v1 submitted 21 February, 2014;
originally announced February 2014.
