-
A phase-field model for quasi-dynamic rupture nucleation and propagation of in-plane faults
Authors:
Fan Fei,
Md Shumon Mia,
Ahmed E. Elbanna,
Jinhyun Choo
Abstract:
Computational modeling of faulting processes is an essential tool for understanding earthquake mechanics but remains challenging due to the structural and material complexities of fault zones. The phase-field method has recently enabled unified modeling of fault propagation and off-fault damage; however, its capability has been restricted to simplified anti-plane settings. In this study, we extend…
▽ More
Computational modeling of faulting processes is an essential tool for understanding earthquake mechanics but remains challenging due to the structural and material complexities of fault zones. The phase-field method has recently enabled unified modeling of fault propagation and off-fault damage; however, its capability has been restricted to simplified anti-plane settings. In this study, we extend the phase-field method to in-plane faulting by introducing two key advancements: (i) the incorporation of enhanced fault kinematics and pressure-dependent shear strength for a more accurate representation of fault behavior, and (ii) a revised fault propagation criterion that explicitly accounts for the coupling between shear strength and normal stress. The proposed formulation is verified against standard discontinuous approaches to quasi-dynamic fault rupture under in-plane conditions and validated using experimental observations and numerical data on fault nucleation and propagation. Simulations incorporating structural complexities and material heterogeneities demonstrate the robustness and versatility of the phase-field model, establishing it as a powerful tool for investigating the interactions between fault zone properties and earthquake processes.
△ Less
Submitted 9 March, 2025;
originally announced March 2025.
-
Roadmap on Atomic-scale Semiconductor Devices
Authors:
Steven R. Schofield,
Andrew J. Fisher,
Eran Ginossar,
Joseph W. Lyding,
Richard Silver,
Fan Fei,
Pradeep Namboodiri,
Jonathan Wyrick,
M. G. Masteghin,
D. C. Cox,
B. N. Murdin,
S. K Clowes,
Joris G. Keizer,
Michelle Y. Simmons,
Holly G. Stemp,
Andrea Morello,
Benoit Voisin,
Sven Rogge,
Robert A. Wolkow,
Lucian Livadaru,
Jason Pitters,
Taylor J. Z. Stock,
Neil J. Curson,
Robert E. Butera,
Tatiana V. Pavlova
, et al. (25 additional authors not shown)
Abstract:
Spin states in semiconductors provide exceptionally stable and noise-resistant environments for qubits, positioning them as optimal candidates for reliable quantum computing technologies. The proposal to use nuclear and electronic spins of donor atoms in silicon, introduced by Kane in 1998, sparked a new research field focused on the precise positioning of individual impurity atoms for quantum dev…
▽ More
Spin states in semiconductors provide exceptionally stable and noise-resistant environments for qubits, positioning them as optimal candidates for reliable quantum computing technologies. The proposal to use nuclear and electronic spins of donor atoms in silicon, introduced by Kane in 1998, sparked a new research field focused on the precise positioning of individual impurity atoms for quantum devices, utilising scanning tunnelling microscopy and ion implantation. This roadmap article reviews the advancements in the 25 years since Kane's proposal, the current challenges, and the future directions in atomic-scale semiconductor device fabrication and measurement. It covers the quest to create a silicon-based quantum computer and expands to include diverse material systems and fabrication techniques, highlighting the potential for a broad range of semiconductor quantum technological applications. Key developments include phosphorus in silicon devices such as single-atom transistors, arrayed few-donor devices, one- and two-qubit gates, three-dimensional architectures, and the development of a toolbox for future quantum integrated circuits. The roadmap also explores new impurity species like arsenic and antimony for enhanced scalability and higher-dimensional spin systems, new chemistry for dopant precursors and lithographic resists, and the potential for germanium-based devices. Emerging methods, such as photon-based lithography and electron beam manipulation, are discussed for their disruptive potential. This roadmap charts the path toward scalable quantum computing and advanced semiconductor quantum technologies, emphasising the critical intersections of experiment, technological development, and theory.
△ Less
Submitted 22 January, 2025; v1 submitted 8 January, 2025;
originally announced January 2025.
-
Colossal terahertz emission with ultrafast tunability based on van der Waals ferroelectric NbOI$_2$
Authors:
Sujan Subedi,
Wenhao Liu,
Wuzhang Fang,
Carter Fox,
Zixin Zhai,
Fan Fei,
Yuan Ping,
Bing Lv,
Jun Xiao
Abstract:
Terahertz (THz) technology is critical for quantum material physics, biomedical imaging, ultrafast electronics, and next-generation wireless communications. However, standing in the way of widespread applications is the scarcity of efficient ultrafast THz sources with on-demand fast modulation and easy on-chip integration capability. Here we report the discovery of colossal THz emission from a van…
▽ More
Terahertz (THz) technology is critical for quantum material physics, biomedical imaging, ultrafast electronics, and next-generation wireless communications. However, standing in the way of widespread applications is the scarcity of efficient ultrafast THz sources with on-demand fast modulation and easy on-chip integration capability. Here we report the discovery of colossal THz emission from a van der Waals (vdW) ferroelectric semiconductor NbOI$_2$. Using THz emission spectroscopy, we observe a THz generation efficiency an order of magnitude higher than that of ZnTe, a standard nonlinear crystal for ultrafast THz generation. We further uncover the underlying generation mechanisms associated with its large ferroelectric polarization by studying the THz emission dependence on excitation wavelength, incident polarization and fluence. Moreover, we demonstrate the ultrafast coherent amplification and annihilation of the THz emission and associated coherent phonon oscillations by employing a double-pump scheme. These findings combined with first-principles calculations, inform new understanding of the THz light-matter interaction in emergent vdW ferroelectrics and pave the way to develop high-performance THz devices on them for quantum materials sensing and ultrafast electronics.
△ Less
Submitted 10 December, 2024;
originally announced December 2024.
-
A Navier-Stokes asymptotic preserving Direct Simulation Monte Carlo method for multi-species gas flows
Authors:
Fei Fei
Abstract:
This paper introduces a new asymptotic-preserving Monte Carlo (APMC) method for simulating multi-species gas flows. This method decomposes the collision operator of the traditional APMC methods into macro and micro collision parts: the macro collision part corresponds to the first-order Chapman-Enskog (CE) expansion, solved with a second-order scheme; In contrast, the micro collision part represen…
▽ More
This paper introduces a new asymptotic-preserving Monte Carlo (APMC) method for simulating multi-species gas flows. This method decomposes the collision operator of the traditional APMC methods into macro and micro collision parts: the macro collision part corresponds to the first-order Chapman-Enskog (CE) expansion, solved with a second-order scheme; In contrast, the micro collision part represents the reminder of high-order nonequilibrium terms, calculated following the traditional APMC methods. As a result, this new APMC method preserves Navier-Stokes asymptotics and second-order accuracy in the fluid limit, while maintaining the advantage of the traditional APMC methods in the kinetic limit. Therefore, it is suitable for multi-species gas flows that span multiple scales due to superior resolution and accuracy in both continuum and rarefied flow regimes. Moreover, directly constructed based on the DSMC collision solver, this new APMC method circumvents the complexities of modeling and computing kinetic models. This feature makes it easily applicable to multi-species gas flows with intricate collision models and more than two species. Finally, a coupling scheme with DSMC has been developed to extend the applicability of this new APMC method to multi-species gas flows with disparate masses.
△ Less
Submitted 26 October, 2024;
originally announced October 2024.
-
Crack opening calculation in phase-field modeling of fluid-filled fracture: A robust and efficient strain-based method
Authors:
Fan Fei,
Jinhyun Choo
Abstract:
The phase-field method has become popular for the numerical modeling of fluid-filled fractures, thanks to its ability to represent complex fracture geometry without algorithms. However, the algorithm-free representation of fracture geometry poses a significant challenge in calculating the crack opening (aperture) of phase-field fracture, which governs the fracture permeability and hence the overal…
▽ More
The phase-field method has become popular for the numerical modeling of fluid-filled fractures, thanks to its ability to represent complex fracture geometry without algorithms. However, the algorithm-free representation of fracture geometry poses a significant challenge in calculating the crack opening (aperture) of phase-field fracture, which governs the fracture permeability and hence the overall hydromechanical behavior. Although several approaches have been devised to compute the crack opening of phase-field fracture, they require a sophisticated algorithm for post-processing the phase-field values or an additional parameter sensitive to the element size and alignment. Here, we develop a novel method for calculating the crack opening of fluid-filled phase-field fracture, which enables one to obtain the crack opening without additional algorithms or parameters. We transform the displacement-jump-based kinematics of a fracture into a continuous strain-based version, insert it into a force balance equation on the fracture, and apply the phase-field approximation. Through this procedure, we obtain a simple equation for the crack opening which can be calculated with quantities at individual material points. We verify the proposed method with analytical and numerical solutions obtained based on discrete representations of fractures, demonstrating its capability to calculate the crack opening regardless of the element size or alignment.
△ Less
Submitted 16 November, 2024; v1 submitted 25 October, 2024;
originally announced October 2024.
-
Boosting the convergence of DSMC by GSIS
Authors:
Liyan Luo,
Qi Li,
Fei Fei,
Lei Wu
Abstract:
A deterministic-stochastic coupling scheme is developed for simulating rarefied gas flows, where the key process is the alternative solving of the macroscopic synthetic equations [Su et al., J. Comput. Phys., 407 (2020) 109245] and the mesoscopic equation via the asymptotic-preserving time-relaxed Monte Carlo scheme [Fei, J. Comput. Phys., 486 (2023) 112128]. Firstly, the macroscopic synthetic equ…
▽ More
A deterministic-stochastic coupling scheme is developed for simulating rarefied gas flows, where the key process is the alternative solving of the macroscopic synthetic equations [Su et al., J. Comput. Phys., 407 (2020) 109245] and the mesoscopic equation via the asymptotic-preserving time-relaxed Monte Carlo scheme [Fei, J. Comput. Phys., 486 (2023) 112128]. Firstly, the macroscopic synthetic equations are exactly derived from the Boltzmann equation, incorporating not only the Newtonian viscosity and Fourier thermal conduction laws but also higher-order constitutive relations that capture rarefaction effects; the latter are extracted from the stochastic solver over a defined sampling interval. Secondly, the macroscopic synthetic equations, with the initial field extracted from the stochastic solver over the same sampling interval, are solved to the steady state or over certain iteration steps. Finally, the simulation particles in the stochastic solver are updated to match the density, velocity, and temperature obtained from the macroscopic synthetic equations. Moreover, simulation particles in the subsequent interval will be partly sampled according to the solutions of macroscopic synthetic equations. As a result, our coupling strategy enhances the asymptotic-preserving characteristic of the stochastic solver and substantially accelerates convergence towards the steady state. Several numerical tests are performed, and it is found that our method can reduce the computational cost in the near-continuum flow regime by two orders of magnitude compared to the direct simulation Monte Carlo method.
△ Less
Submitted 25 June, 2024; v1 submitted 24 June, 2024;
originally announced June 2024.
-
Light-induced giant enhancement of nonreciprocal transport at KTaO3-based interfaces
Authors:
Xu Zhang,
Tongshuai Zhu,
Shuai Zhang,
Zhongqiang Chen,
Anke Song,
Chong Zhang,
Rongzheng Gao,
Wei Niu,
Yequan Chen,
Fucong Fei,
Yilin Tai,
Guoan Li,
Binghui Ge,
Wenkai Lou,
Jie Shen,
Haijun Zhang,
Kai Chang,
Fengqi Song,
Rong Zhang,
Xuefeng Wang
Abstract:
Nonlinear transport is a unique functionality of noncentrosymmetric systems, which reflects profound physics, such as spin-orbit interaction, superconductivity and band geometry. However, it remains highly challenging to enhance the nonreciprocal transport for promising rectification devices. Here, we observe a light-induced giant enhancement of nonreciprocal transport at the superconducting and e…
▽ More
Nonlinear transport is a unique functionality of noncentrosymmetric systems, which reflects profound physics, such as spin-orbit interaction, superconductivity and band geometry. However, it remains highly challenging to enhance the nonreciprocal transport for promising rectification devices. Here, we observe a light-induced giant enhancement of nonreciprocal transport at the superconducting and epitaxial CaZrO3/KTaO3 (111) interfaces. The nonreciprocal transport coefficient undergoes a giant increase with three orders of magnitude up to 105 A-1T-1. Furthermore, a strong Rashba spin-orbit coupling effective field of 14.7 T is achieved with abundant high-mobility photocarriers under ultraviolet illumination, which accounts for the giant enhancement of nonreciprocal transport coefficient. Our first-principles calculations further disclose the stronger Rashba spin-orbit coupling strength and the longer relaxation time in the photocarrier excitation process, bridging the light-property quantitative relationship. Our work provides an alternative pathway to boost nonreciprocal transport in noncentrosymmetric systems and facilitates the promising applications in opto-rectification devices and spin-orbitronic devices.
△ Less
Submitted 7 March, 2024;
originally announced March 2024.
-
A phase-field model for hydraulic fracture nucleation and propagation in porous media
Authors:
Fan Fei,
Andre Costa,
John E. Dolbow,
Randolph R. Settgast,
Matteo Cusini
Abstract:
Many geo-engineering applications, e.g., enhanced geothermal systems, rely on hydraulic fracturing to enhance the permeability of natural formations and allow for sufficient fluid circulation. Over the past few decades, the phase-field method has grown in popularity as a valid approach to modeling hydraulic fracturing because of the ease of handling complex fracture propagation geometries. However…
▽ More
Many geo-engineering applications, e.g., enhanced geothermal systems, rely on hydraulic fracturing to enhance the permeability of natural formations and allow for sufficient fluid circulation. Over the past few decades, the phase-field method has grown in popularity as a valid approach to modeling hydraulic fracturing because of the ease of handling complex fracture propagation geometries. However, existing phase-field methods cannot appropriately capture nucleation of hydraulic fractures because their formulations are solely energy-based and do not explicitly take into account the strength of the material. Thus, in this work, we propose a novel phase-field formulation for hydraulic fracturing with the main goal of modeling fracture nucleation in porous media, e.g., rocks. Built on the variational formulation of previous phase-field methods, the proposed model incorporates the material strength envelope for hydraulic fracture nucleation through two important steps: (i) an external driving force term, included in the damage evolution equation, that accounts for the material strength; (ii) a properly designed damage function that defines the fluid pressure contribution on the crack driving force. The comparison of numerical results for two-dimensional (2D) test cases with existing analytical solutions demonstrates that the proposed phase-field model can accurately model both nucleation and propagation of hydraulic fractures. Additionally, we present the simulation of hydraulic fracturing in a three-dimensional (3D) domain with various stress conditions to demonstrate the applicability of the method to realistic scenarios.
△ Less
Submitted 25 April, 2023;
originally announced April 2023.
-
Tunable optical topological transitions of plasmon polaritons in WTe2 van der Waals films
Authors:
Yuangang Xie,
Chong Wang,
Fucong Fei,
Yuqi Li,
Qiaoxia Xing,
Shenyang Huang,
Yuchen Lei,
Jiasheng Zhang,
Lei Mu,
Yaomin Dai,
Fengqi Song,
Hugen Yan
Abstract:
Naturally existing in-plane hyperbolic polaritons and the associated optical topological transitions, which avoid the nano-structuring to achieve hyperbolicity, can outperform their counterparts in artificial metasurfaces. Such plasmon polaritons are rare, but experimentally revealed recently in WTe2 van der Waals thin films. Different from phonon polaritons, hyperbolic plasmon polaritons originat…
▽ More
Naturally existing in-plane hyperbolic polaritons and the associated optical topological transitions, which avoid the nano-structuring to achieve hyperbolicity, can outperform their counterparts in artificial metasurfaces. Such plasmon polaritons are rare, but experimentally revealed recently in WTe2 van der Waals thin films. Different from phonon polaritons, hyperbolic plasmon polaritons originate from the interplay of free carrier Drude response and interband transitions, which promise good intrinsic tunability. However, tunable in-plane hyperbolic plasmon polariton and its optical topological transition of the isofrequency contours to the elliptic topology in a natural material have not been realized. Here we demonstrate the tuning of the optical topological transition through Mo-doping and temperature. The optical topological transition energy is tuned over a wide range, with frequencies ranging from 429 cm-1 (23.3 microns) for pure WTe2 to 270 cm-1 (37.0 microns) at the 50% Mo-doping level at 10 K. Moreover, the temperature-induced blueshift of the optical topological transition energy is also revealed, enabling active and reversible tuning. Surprisingly, the localized surface plasmon resonance in skew ribbons shows unusual polarization dependence, accurately manifesting its topology, which renders a reliable means to track the topology with far-field techniques. Our results open an avenue for reconfigurable photonic devices capable of plasmon polariton steering, such as canaling, focusing and routing, and pave a way for low-symmetry plasmonic nanophotonics based on anisotropic natural materials.
△ Less
Submitted 9 August, 2023; v1 submitted 14 October, 2022;
originally announced October 2022.
-
Extended Barton-Bandis model for rock joints under cyclic loading: Formulation and implicit algorithm
Authors:
Fan Fei,
Jinhyun Choo
Abstract:
In this paper, the Barton-Bandis model for rock joints is extended to cyclic loading conditions, without any new material parameter. Also developed herein is an algorithm for implicit numerical solution of the extended Barton-Bandis model, which can also be used for the original Barton-Bandis model for which an implicit algorithm has been unavailable. To this end, we first cast the Barton-Bandis m…
▽ More
In this paper, the Barton-Bandis model for rock joints is extended to cyclic loading conditions, without any new material parameter. Also developed herein is an algorithm for implicit numerical solution of the extended Barton-Bandis model, which can also be used for the original Barton-Bandis model for which an implicit algorithm has been unavailable. To this end, we first cast the Barton-Bandis model into an incremental elasto-plastic framework, deriving an expression for the elastic shear stiffness being consistent with the original model formulation. We then extend the model formulation to cyclic loading conditions, incorporating the dependence of shear stress and dilation on the joint position and the shearing direction. The extension is achieved by introducing a few state-dependent variables which can be calculated with the existing material parameters. For robust and accurate utilization of the model, we also develop an implicit algorithm based on return mapping, which is unconditionally stable and guarantees satisfaction of the strength criterion. We verify that the proposed model formulation and algorithm produces the same results as the original Barton-Bandis model under monotonic shearing conditions. We then validate the extended Barton-Bandis model against experimental data on natural rock joints under cycling loading conditions. The present work thus enables the Barton-Bandis model, which has been exceptionally popular in research and practice, to be applicable to a wider range of problems in rock mechanics and rock engineering.
△ Less
Submitted 16 November, 2022; v1 submitted 13 July, 2022;
originally announced July 2022.
-
A phase-field model for quasi-dynamic nucleation, growth, and propagation of rate-and-state faults
Authors:
Fan Fei,
Md Shumon Mia,
Ahmed E. Elbanna,
Jinhyun Choo
Abstract:
Despite its critical role in the study of earthquake processes, numerical simulation of the entire stages of fault rupture remains a formidable task. The main challenges in simulating a fault rupture process include complex evolution of fault geometry, frictional contact, and off-fault damage over a wide range of spatial and temporal scales. Here, we develop a phase-field model for quasi-dynamic f…
▽ More
Despite its critical role in the study of earthquake processes, numerical simulation of the entire stages of fault rupture remains a formidable task. The main challenges in simulating a fault rupture process include complex evolution of fault geometry, frictional contact, and off-fault damage over a wide range of spatial and temporal scales. Here, we develop a phase-field model for quasi-dynamic fault nucleation, growth, and propagation, which features two standout advantages: (i) it does not require any sophisticated algorithms to represent fault geometry and its evolution; and (ii) it allows for modeling fault nucleation, propagation, and off-fault damage processes with a single formulation. Built on a recently developed phase-field framework for shear fractures with frictional contact, the proposed formulation incorporates rate- and state-dependent friction, radiation damping, and their impacts on fault mechanics and off-fault damage. We show that the numerical results of the phase-field model are consistent with those obtained from well-verified approaches that model the fault as a surface of discontinuity, without suffering from the mesh convergence issue in the existing continuous approaches to fault rupture (e.g. the stress glut method). Further, through numerical examples of fault propagation in various settings, we demonstrate that the phase-field approach may open new opportunities for investigating complex earthquake processes that have remained overly challenging for the existing numerical methods.
△ Less
Submitted 19 October, 2022; v1 submitted 16 June, 2022;
originally announced June 2022.
-
A Survey of Impedance Measurement Methods in Power Electronics
Authors:
Huamin Jie,
Zhenyu Zhao,
Fan Fei,
Rejeki Simanjorang,
Firman Sasongko,
Kye Yak See
Abstract:
Impedance is one of the vital parameters that provides useful information for many power electronics related applications. A lot of impedance measurement methods in power electronics have been reported. However, a comprehensive investigation among these methods in terms of their characteristics, advantages, and limitations has not been found in the literature. In order to bridge this gap, a survey…
▽ More
Impedance is one of the vital parameters that provides useful information for many power electronics related applications. A lot of impedance measurement methods in power electronics have been reported. However, a comprehensive investigation among these methods in terms of their characteristics, advantages, and limitations has not been found in the literature. In order to bridge this gap, a survey of the impedance measurement methods is conducted in this paper. These methods are introduced, discussed, and then classified into different categories depending on the measurement modes, principles, and instruments. Moreover, recommendations for the future research on the impedance measurement are also presented.
△ Less
Submitted 6 April, 2022;
originally announced April 2022.
-
A unified stochastic particle method based on the Bhatnagar-Gross-Krook model for polyatomic gases and its combination with DSMC
Authors:
Fei Fei,
Yuan Hu,
Patrick Jenny
Abstract:
Simulating hypersonic flow around a space vehicle is challenging because of the multiscale and nonequilibrium nature inherent in these flows. To effectively deal with such flows, a novel particle particle hybrid scheme combining the stochastic particle Bhatnagar-Gross-Krook (BGK) method with Direct Simulation Monte Carlo (DSMC) was developed recently, but only for monatomic gases [Fei et. al., J.…
▽ More
Simulating hypersonic flow around a space vehicle is challenging because of the multiscale and nonequilibrium nature inherent in these flows. To effectively deal with such flows, a novel particle particle hybrid scheme combining the stochastic particle Bhatnagar-Gross-Krook (BGK) method with Direct Simulation Monte Carlo (DSMC) was developed recently, but only for monatomic gases [Fei et. al., J. Comput. Phys. 2021]. Here this work is extended to the particle-particle hybrid method for polyatomic gases. In the near continuum regime, employing the Ellipsoidal Statistical BGK model proposed by Y. Dauvois, et. al. [Eur. J. Mech. B Fluids, 2021] with discrete levels of vibrational energy, the stochastic particle BGK method is first established following the idea of the unified stochastic particle BGK (USPBGK) scheme. In the fluid limit, it has been proven to be of second order temporal and spatial accuracy. Then, the USPBGK scheme with rotational and vibrational energies is combined with DSMC to construct a hybrid method for polyatomic gases. The present hybrid scheme is validated with numerical tests of homogenous relaxation, 1D shock structure and 2D hypersonic flows past a wedge and a cylinder. Compared to traditional stochastic particle methods, the proposed hybrid method can achieve higher accuracy at a much lower computational cost. Therefore, it is a more efficient tool to study multiscale hypersonic flows.
△ Less
Submitted 27 January, 2022;
originally announced February 2022.
-
Phase-field modeling of rock fractures with roughness
Authors:
Fan Fei,
Jinhyun Choo,
Chong Liu,
Joshua A. White
Abstract:
Phase-field modeling -- a continuous approach to discontinuities -- is gaining popularity for simulating rock fractures due to its ability to handle complex, discontinuous geometry without an explicit surface tracking algorithm. None of the existing phase-field models, however, incorporates the impact of surface roughness on the mechanical response of fractures -- such as elastic deformability and…
▽ More
Phase-field modeling -- a continuous approach to discontinuities -- is gaining popularity for simulating rock fractures due to its ability to handle complex, discontinuous geometry without an explicit surface tracking algorithm. None of the existing phase-field models, however, incorporates the impact of surface roughness on the mechanical response of fractures -- such as elastic deformability and shear-induced dilation -- despite the importance of this behavior for subsurface systems. To fill this gap, here we introduce the first framework for phase-field modeling of rough rock fractures. The framework transforms a displacement-jump-based discrete constitutive model for discontinuities into a strain-based continuous model, without any additional parameter, and then casts it into a phase-field formulation for frictional interfaces. We illustrate the framework by constructing a particular phase-field form employing a rock joint model originally formulated for discrete modeling. The results obtained by the new formulation show excellent agreement with those of a well-established discrete method for a variety of problems ranging from shearing of a single discontinuity to compression of fractured rocks. It is further demonstrated that the phase-field formulation can well simulate complex crack growth from rough discontinuities. Consequently, our phase-field framework provides an unprecedented bridge between a discrete constitutive model for rough discontinuities -- common in rock mechanics -- and the continuous finite element method -- standard in computational mechanics -- without any algorithm to explicitly represent discontinuity geometry.
△ Less
Submitted 10 December, 2021; v1 submitted 30 May, 2021;
originally announced May 2021.
-
Double-phase-field formulation for mixed-mode fracture in rocks
Authors:
Fan Fei,
Jinhyun Choo
Abstract:
Cracking of rocks and rock-like materials exhibits a rich variety of patterns where tensile (mode I) and shear (mode II) fractures are often interwoven. These mixed-mode fractures are usually cohesive (quasi-brittle) and frictional. Although phase-field modeling is increasingly used for rock fracture simulation, no phase-field formulation is available for cohesive and frictional mixed-mode fractur…
▽ More
Cracking of rocks and rock-like materials exhibits a rich variety of patterns where tensile (mode I) and shear (mode II) fractures are often interwoven. These mixed-mode fractures are usually cohesive (quasi-brittle) and frictional. Although phase-field modeling is increasingly used for rock fracture simulation, no phase-field formulation is available for cohesive and frictional mixed-mode fracture. To address this shortfall, here we develop a double-phase-field formulation that employs two different phase fields to describe cohesive tensile fracture and frictional shear fracture individually. The formulation rigorously combines the two phase fields through three approaches: (i) crack-direction-based decomposition of the strain energy into the tensile, shear, and pure compression parts, (ii) contact-dependent calculation of the potential energy, and (iii) energy-based determination of the dominant fracturing mode in each contact condition. We validate the proposed model, both qualitatively and quantitatively, with experimental data on mixed-mode fracture in rocks. The validation results demonstrate that the double-phase-field model -- a combination of two quasi-brittle phase-field models -- allows one to directly use material strengths measured from experiments, unlike brittle phase-field models for mixed-mode fracture in rocks. Another standout feature of the double-phase-field model is that it can simulate, and naturally distinguish between, tensile and shear fractures without complex algorithms.
△ Less
Submitted 7 December, 2020; v1 submitted 10 September, 2020;
originally announced September 2020.
-
A phase-field model of frictional shear fracture in geologic materials
Authors:
Fan Fei,
Jinhyun Choo
Abstract:
Geologic shear fractures such as faults and slip surfaces involve marked friction along the discontinuities as they are subjected to significant confining pressures. This friction plays a critical role in the growth of these shear fractures, as revealed by the fracture mechanics theory of Palmer and Rice decades ago. In this paper, we develop a novel phase-field model of shear fracture in pressure…
▽ More
Geologic shear fractures such as faults and slip surfaces involve marked friction along the discontinuities as they are subjected to significant confining pressures. This friction plays a critical role in the growth of these shear fractures, as revealed by the fracture mechanics theory of Palmer and Rice decades ago. In this paper, we develop a novel phase-field model of shear fracture in pressure-sensitive geomaterials, honoring the role of friction in the fracture propagation mechanism. Building on a recently proposed phase-field method for frictional interfaces, we formulate a set of governing equations for different contact conditions (or lack thereof) in which frictional energy dissipation emerges in the crack driving force during slip. We then derive the degradation function and the threshold fracture energy of the phase-field model such that the stress-strain behavior is insensitive to the length parameter for phase-field regularization. This derivation procedure extends a methodology used in recent phase-field models of cohesive tensile fracture to shear fracture in frictional materials in which peak and residual strengths coexist and evolve by confining pressure. The resulting phase-field formulation is demonstrably consistent with the theory of Palmer and Rice. Numerical examples showcase that the proposed phase-field model is a physically sound and numerically efficient method for simulating shear fracture processes in geologic materials, such as faulting and slip surface growth.
△ Less
Submitted 2 July, 2020; v1 submitted 10 March, 2020;
originally announced March 2020.
-
A Unified Stochastic Particle Bhatnagar-Gross-Krook Method for Multiscale Gas Flows
Authors:
Fei Fei,
Jun Zhang,
Jing Li,
ZhaoHui Liu
Abstract:
The stochastic particle method based on Bhatnagar-Gross-Krook (BGK) or ellipsoidal statistical BGK (ESBGK) model approximates the pairwise collisions in the Boltzmann equation using a relaxation process. Therefore, it is more efficient to simulate gas flows at small Knudsen numbers than the counterparts based on the original Boltzmann equation, such as the Direct Simulation Monte Carlo (DSMC) meth…
▽ More
The stochastic particle method based on Bhatnagar-Gross-Krook (BGK) or ellipsoidal statistical BGK (ESBGK) model approximates the pairwise collisions in the Boltzmann equation using a relaxation process. Therefore, it is more efficient to simulate gas flows at small Knudsen numbers than the counterparts based on the original Boltzmann equation, such as the Direct Simulation Monte Carlo (DSMC) method. However, the traditional stochastic particle BGK method decouples the molecular motions and collisions in analogy to the DSMC method, and hence its transport properties deviate from physical values as the time step increases. This defect significantly affects its computational accuracy and efficiency for the simulation of multiscale flows, especially when the transport processes in the continuum regime is important. In the present paper, we propose a unified stochastic particle ESBGK (USP-ESBGK) method by combining the molecular convection and collision effects. In the continuum regime, the proposed method can be applied using large temporal-spatial discretization and approaches to the Navier-Stokes solutions accurately. Furthermore, it is capable to simulate both the small scale non-equilibrium flows and large scale continuum flows within a unified framework efficiently and accurately. The applications of USP-ESBGK method to a variety of benchmark problems, including Couette flow, thermal Couette flow, Poiseuille flow, Sod tube flow, cavity flow, and flow through a slit, demonstrated that it is a promising tool to simulate multiscale gas flows ranging from rarefied to continuum regime.
△ Less
Submitted 11 August, 2018;
originally announced August 2018.
