-
The CMS Data Acquisition System for the Phase-2 Upgrade
Authors:
Jean-Marc André,
Ulf Behrens,
Andrea Bocci,
James Branson,
Sergio Cittolin,
Diego Da Silva Gomes,
Georgiana-Lavinia Darlea,
Christian Deldicque,
Zeynep Demiragli,
Marc Dobson,
Nicolas Doualot,
Samim Erhan,
Jonathan Richard Fulcher,
Dominique Gigi,
Maciej Gladki,
Frank Glege,
Guillelmo Gomez-Ceballos,
Magnus Hansen,
Jeroen Hegeman,
André Holzner,
Michael Lettrich,
Audrius Mecionis,
Frans Meijers,
Emilio Meschi,
Remigius K. Mommsen
, et al. (20 additional authors not shown)
Abstract:
During the third long shutdown of the CERN Large Hadron Collider, the CMS Detector will undergo a major upgrade to prepare for Phase-2 of the CMS physics program, starting around 2026. The upgraded CMS detector will be read out at an unprecedented data rate of up to 50 Tb/s with an event rate of 750 kHz, selected by the level-1 hardware trigger, and an average event size of 7.4 MB. Complete events…
▽ More
During the third long shutdown of the CERN Large Hadron Collider, the CMS Detector will undergo a major upgrade to prepare for Phase-2 of the CMS physics program, starting around 2026. The upgraded CMS detector will be read out at an unprecedented data rate of up to 50 Tb/s with an event rate of 750 kHz, selected by the level-1 hardware trigger, and an average event size of 7.4 MB. Complete events will be analyzed by the High-Level Trigger (HLT) using software algorithms running on standard processing nodes, potentially augmented with hardware accelerators. Selected events will be stored permanently at a rate of up to 7.5 kHz for offline processing and analysis. This paper presents the baseline design of the DAQ and HLT systems for Phase-2, taking into account the projected evolution of high speed network fabrics for event building and distribution, and the anticipated performance of general purpose CPU. In addition, some opportunities offered by reading out and processing parts of the detector data at the full LHC bunch crossing rate (40 MHz) are discussed.
△ Less
Submitted 23 June, 2018;
originally announced June 2018.
-
Current Status of the SANAEM RFQ Accelerator Beamline
Authors:
G. Turemen,
B. Yasatekin,
S. Ogur,
V. Yildiz,
O. Mete,
S. Oz,
A. Ozbey,
H. Yildiz,
F. Yaman,
Y. Akgun,
A. Alacakir,
S. Bolukdemir,
A. Bozbey,
A. Sahin,
G. Unel,
S. Erhan
Abstract:
The design and production studies of the proton beamline of SPP, which aims to acquire know-how on proton accelerator technology thru development of man power and serves as particle accelerator technologies test bench, continue at TAEK-SANAEM as a multi-phase project. For the first phase, 20 keV protons will be accelerated to 1.3 MeV by a single piece RFQ. Currently, the beam current and stability…
▽ More
The design and production studies of the proton beamline of SPP, which aims to acquire know-how on proton accelerator technology thru development of man power and serves as particle accelerator technologies test bench, continue at TAEK-SANAEM as a multi-phase project. For the first phase, 20 keV protons will be accelerated to 1.3 MeV by a single piece RFQ. Currently, the beam current and stability tests are ongoing for the Inductively Coupled Plasma ion source. The measured magnetic field maps of the Low Energy Beam Transport solenoids are being used for matching various beam configurations of the ion source to the RFQ by computer simulations. The installation of the low energy diagnostics box was completed in Q1 of 2015. The production of the RFQ cavity was started with aluminum 7075-T6 which will be subsequently coated by Copper to reduce the RF (Ohmic) losses. On the RF side, the development of the hybrid power supply based on solid state and tetrode amplifiers continues. All RF transmission components have already produced with the exception of the circulator and the power coupling antenna which are in the manufacturing and design phases, respectively. The acceptance tests of the produced RF components are ongoing. This work summarizes the design, production and test phases of the above-mentioned SPP proton beamline components.
△ Less
Submitted 30 September, 2015; v1 submitted 28 April, 2015;
originally announced April 2015.
-
A wire chamber for educational purposes
Authors:
Saime Gurbuz,
Gokhan Unel,
Samim Erhan
Abstract:
Gaseous detectors with sense wires are still in use today in small experiments as well as modern ones as those at the LHC. This short note is about the construction of a small wire chamber with limited resources, which could be used both as an educational tool and also as a tracker in small experiments. The particular detector type selected for this work is the so called "Delay Wire Chamber": it h…
▽ More
Gaseous detectors with sense wires are still in use today in small experiments as well as modern ones as those at the LHC. This short note is about the construction of a small wire chamber with limited resources, which could be used both as an educational tool and also as a tracker in small experiments. The particular detector type selected for this work is the so called "Delay Wire Chamber": it has only two output channels per plane and can be made fully gas tight for educational operations. The design can be made with free software tools, and the construction can be achieved by relatively simple means.
△ Less
Submitted 1 September, 2014;
originally announced September 2014.
-
Project PROMETHEUS: Design and Construction of a Radio Frequency Quadrupole at TAEK
Authors:
G. Turemen,
B. Yasatekin,
O. Mete,
M. Celik,
Z. Sali,
Y. Akgun,
A. Alacakir,
S. Bolukdemir,
E. Durukan,
H. Karadeniz,
E. Recepoglu,
E. Cavlan,
G. Unel,
S. Erhan
Abstract:
The PROMETHEUS Project is ongoing for the design and development of a 4-vane radio frequency quadrupole (RFQ) together with its H+ ion source, a low energy beam transport (LEBT) line and diagnostics section. The main goal of the project is to achieve the acceleration of the low energy ions up to 1.5 MeV by an RFQ (352 MHz) shorter than 2 meter. A plasma ion source is being developed to produce a 2…
▽ More
The PROMETHEUS Project is ongoing for the design and development of a 4-vane radio frequency quadrupole (RFQ) together with its H+ ion source, a low energy beam transport (LEBT) line and diagnostics section. The main goal of the project is to achieve the acceleration of the low energy ions up to 1.5 MeV by an RFQ (352 MHz) shorter than 2 meter. A plasma ion source is being developed to produce a 20 keV, 1 mA H+ beam. Simulation results for ion source, transmission and beam dynamics are presented together with analytical studies performed with newly developed RFQ design code DEMIRCI. Simulation results shows that a beam transmission 99% could be achieved at 1.7 m downstream reaching an energy of 1.5 MeV. As the first phase an Aluminum RFQ prototype, the so-called cold model, will be built for low power RF characterization. In this contribution the status of the project, design considerations, simulation results, the various diagnostics techniques and RFQ manufacturing issues are discussed.
△ Less
Submitted 28 April, 2015; v1 submitted 2 October, 2013;
originally announced October 2013.
-
Commissioning of the CMS High Level Trigger
Authors:
Lorenzo Agostino,
Gerry Bauer,
Barbara Beccati,
Ulf Behrens,
Jeffrey Berryhil,
Kurt Biery,
Tulika Bose,
Angela Brett,
James Branson,
Eric Cano,
Harry Cheung,
Marek Ciganek,
Sergio Cittolin,
Jose Antonio Coarasa,
Bryan Dahmes,
Christian Deldicque,
Elizabeth Dusinberre,
Samim Erhan,
Dominique Gigi,
Frank Glege,
Robert Gomez-Reino,
Johannes Gutleber,
Derek Hatton,
Jean-Francois Laurens,
Constantin Loizides
, et al. (25 additional authors not shown)
Abstract:
The CMS experiment will collect data from the proton-proton collisions delivered by the Large Hadron Collider (LHC) at a centre-of-mass energy up to 14 TeV. The CMS trigger system is designed to cope with unprecedented luminosities and LHC bunch-crossing rates up to 40 MHz. The unique CMS trigger architecture only employs two trigger levels. The Level-1 trigger is implemented using custom electr…
▽ More
The CMS experiment will collect data from the proton-proton collisions delivered by the Large Hadron Collider (LHC) at a centre-of-mass energy up to 14 TeV. The CMS trigger system is designed to cope with unprecedented luminosities and LHC bunch-crossing rates up to 40 MHz. The unique CMS trigger architecture only employs two trigger levels. The Level-1 trigger is implemented using custom electronics, while the High Level Trigger (HLT) is based on software algorithms running on a large cluster of commercial processors, the Event Filter Farm. We present the major functionalities of the CMS High Level Trigger system as of the starting of LHC beams operations in September 2008. The validation of the HLT system in the online environment with Monte Carlo simulated data and its commissioning during cosmic rays data taking campaigns are discussed in detail. We conclude with the description of the HLT operations with the first circulating LHC beams before the incident occurred the 19th September 2008.
△ Less
Submitted 7 August, 2009;
originally announced August 2009.
-
The CMS Event Builder
Authors:
V. Brigljevic,
G. Bruno,
E. Cano,
S. Cittolin,
A. Csilling,
D. Gigi,
F. Glege,
R. Gomez-Reino,
M. Gulmini,
J. Gutleber,
C. Jacobs,
M. Kozlovszky,
H. Larsen,
I. Magrans de Abril,
F. Meijers,
E. Meschi,
S. Murray,
A. Oh,
L. Orsini,
L. Pollet,
A. Racz,
D. Samyn,
P. Scharff-Hansen,
C. Schwick,
P. Sphicas
, et al. (10 additional authors not shown)
Abstract:
The data acquisition system of the CMS experiment at the Large Hadron Collider will employ an event builder which will combine data from about 500 data sources into full events at an aggregate throughput of 100 GByte/s. Several architectures and switch technologies have been evaluated for the DAQ Technical Design Report by measurements with test benches and by simulation.
This paper describes…
▽ More
The data acquisition system of the CMS experiment at the Large Hadron Collider will employ an event builder which will combine data from about 500 data sources into full events at an aggregate throughput of 100 GByte/s. Several architectures and switch technologies have been evaluated for the DAQ Technical Design Report by measurements with test benches and by simulation.
This paper describes studies of an EVB test-bench based on 64 PCs acting as data sources and data consumers and employing both Gigabit Ethernet and Myrinet technologies as the interconnect. In the case of Ethernet, protocols based on Layer-2 frames and on TCP/IP are evaluated. Results from ongoing studies, including measurements on throughput and scaling are presented.
The architecture of the baseline CMS event builder will be outlined. The event builder is organised into two stages with intelligent buffers in between. The first stage contains 64 switches performing a first level of data concentration by building super-fragments from fragments of 8 data sources. The second stage combines the 64 super-fragments into full events. This architecture allows installation of the second stage of the event builder in steps, with the overall throughput scaling linearly with the number of switches in the second stage. Possible implementations of the components of the event builder are discussed and the expected performance of the full event builder is outlined.
△ Less
Submitted 20 June, 2003;
originally announced June 2003.
