-
A scaling law in optomechanically induced nonlinear oscillation
Authors:
Han Xiao Zhang,
Vitalie Eremeev,
Jinhui Wu,
Miguel Orszag,
Bing He
Abstract:
Stable limit cycle as a stabilized mechanical oscillation is the primary result of the dynamical evolution of an optomechanical system under sufficiently powerful pump. Because this dynamical process is highly nonlinear, it was not clear whether there exists a quantitative law to relate an evolved mechanical oscillation (the limit cycle of the dynamical process) to the given parameters of the fabr…
▽ More
Stable limit cycle as a stabilized mechanical oscillation is the primary result of the dynamical evolution of an optomechanical system under sufficiently powerful pump. Because this dynamical process is highly nonlinear, it was not clear whether there exists a quantitative law to relate an evolved mechanical oscillation (the limit cycle of the dynamical process) to the given parameters of the fabricated system. Here, by means of the numerical simulations based on nonlinear dynamics, we demonstrate the existence of such quantitative relations that are generally valid to the nonlinear optomechanical processes. These quantitative relations can be summarized to a scaling law that is seemingly similar to those in phase transitions of many-body systems but has very different properties. Such a quantitative law enables one to find the more feasible system parameters for realizing the same or a similar dynamical evolution result, so it will be useful to the relevant experimental researches.
△ Less
Submitted 11 October, 2024;
originally announced October 2024.
-
Simultaneous photon and phonon lasing in a two-tone driven optomechanical system
Authors:
Vitalie Eremeev,
Hugo Molinares,
Luis A. Correa,
Bing He
Abstract:
Achieving simultaneous lasing of photons and phonons in optomechanical setups has great potential for applications in quantum information processing, high precision sensing and the design of hybrid photonic-phononic devices. Here, we explore this possibility with an optomechanical system driven by a two-tone field. Whenever the difference between the driving frequencies matches the associated mech…
▽ More
Achieving simultaneous lasing of photons and phonons in optomechanical setups has great potential for applications in quantum information processing, high precision sensing and the design of hybrid photonic-phononic devices. Here, we explore this possibility with an optomechanical system driven by a two-tone field. Whenever the difference between the driving frequencies matches the associated mechanical frequency, the photon and phonon populations are found to achieve steady-state coherent oscillations, demonstrating a dual lasing phenomenon. Such drive-tone resonance condition can synchronize the phases of the photon and phonon fields, which facilitates a robust simultaneous lasing. Here, we provide analytical insights into the joint amplification of the optical and mechanical modes, and further confirm the dual lasing phenomenon by numerically calculating the relevant correlation functions and the power spectrum. Our setup, consisting of a single optomechanical cavity, is simpler than previous realizations of dual lasing and provides a clean picture of the underlying mechanisms. Our work thus paves the way for the development of novel strategies for the optimisation of optomechanical interactions through tailored driving schemes.
△ Less
Submitted 3 October, 2024;
originally announced October 2024.
-
Latest Development of Electropolishing Optimization for 650 MHz Niobium Cavity
Authors:
V. Chouhan,
D. Bice,
D. Burk,
S. Chandrasekaran,
A. Cravatta,
P. Dubiel,
G. V. Eremeev,
F. Furuta,
O. Melnychuk,
A. Netepenko,
M. K. Ng,
J. Ozelis,
H. Park,
T. Ring,
G. Wu,
B. Guilfoyle,
M. P. Kelly,
T. Reid
Abstract:
Electropolishing (EP) of 1.3 GHz niobium superconducting RF cavities is conducted to achieve a desired smooth and contaminant-free surface that yields good RF performance. Achieving a smooth surface of a large-sized elliptical cavity with the standard EP conditions was found to be challenging. This work aimed to conduct a systematic parametric EP study to understand the effects of various EP param…
▽ More
Electropolishing (EP) of 1.3 GHz niobium superconducting RF cavities is conducted to achieve a desired smooth and contaminant-free surface that yields good RF performance. Achieving a smooth surface of a large-sized elliptical cavity with the standard EP conditions was found to be challenging. This work aimed to conduct a systematic parametric EP study to understand the effects of various EP parameters on the surface of 650 MHz niobium cavities used in the Proton Improvement Plan-II (PIP-II) linear accelerator. Parameters optimized in this study provided a smooth surface of the cavities. The electropolished cavity showed significantly a higher accelerating gradient meeting baseline requirement and qualified for further surface treatment to improve the cavity quality factor.
△ Less
Submitted 26 January, 2024;
originally announced January 2024.
-
Advanced surface treatments for medium-velocity superconducting RF cavities for high accelerating gradient continuous-wave operation
Authors:
K. McGee,
S. Kim,
K. Elliott,
A. Ganshyn,
W. Hartung,
P. Ostroumov,
A. Taylor,
T. Xu,
M. Martinello,
G. V. Eremeev,
A. Netepenko,
F. Furuta,
O. Melnychuk,
M. P. Kelly,
B. Guilfoyle,
T. Reid
Abstract:
Nitrogen-doping and furnace-baking are advanced high-Q0 recipes developed for 1.3 GHz TESLA-type cavities. These treatments will significantly benefit the high-Q0 linear accelerator community if they can be successfully adapted to different cavity styles and frequencies. Strong frequency- and geometry- dependence of these recipes makes the technology transfer amongst different cavity styles and fr…
▽ More
Nitrogen-doping and furnace-baking are advanced high-Q0 recipes developed for 1.3 GHz TESLA-type cavities. These treatments will significantly benefit the high-Q0 linear accelerator community if they can be successfully adapted to different cavity styles and frequencies. Strong frequency- and geometry- dependence of these recipes makes the technology transfer amongst different cavity styles and frequencies far from straightforward, and requires rigorous study. Upcoming high-Q0 continuous-wave linear accelerator projects, such as the proposed Michigan State University Facility for Rare Isotope Beam Energy Upgrade, and the underway Fermilab's Proton Improvement Plan-II, could benefit enormously from adapting these techniques to their beta_opt = 0.6 ~650 MHz 5-cell elliptical superconducting rf cavities, operating at an accelerating gradient of around ~17 MV/m. This is the first investigation of the adaptation of nitrogen doping and medium temperature furnace baking to prototype 644 MHz beta_opt = 0.65 cavities, with the aim of demonstrating the high-Q0 potential of these recipes in these novel cavities for future optimization as part of the FRIB400 project R&D. We find that nitrogen-doping delivers superior Q0, despite the sub-GHz operating frequency of these cavities, but is sensitive to the post-doping electropolishing removal step and experiences elevated residual resistance. Medium temperature furnace baking delivers reasonable performance with decreased residual resistance compared to the nitrogen doped cavity, but may require further recipe refinement. The gradient requirement for the FRIB400 upgrade project is comfortably achieved by both recipes.
△ Less
Submitted 20 July, 2023;
originally announced July 2023.
-
First Results From Nanoindentation of Vapor Diffused Nb3Sn Films on Nb
Authors:
U. Pudasaini,
G. V. Eremeev,
S. Cheban
Abstract:
The mechanical vulnerability of the Nb3Sn-coated cavities is identified as one of the significant technical hurdles toward deploying them in practical accelerator applications in the not-so-distant future. It is crucial to characterize the material's mechanical properties in ways to address such vulnerability. Nanoindentation is a widely used technique for measuring the mechanical properties of th…
▽ More
The mechanical vulnerability of the Nb3Sn-coated cavities is identified as one of the significant technical hurdles toward deploying them in practical accelerator applications in the not-so-distant future. It is crucial to characterize the material's mechanical properties in ways to address such vulnerability. Nanoindentation is a widely used technique for measuring the mechanical properties of thin films that involves indenting the film with a small diamond tip and measuring the force-displacement response to calculate the film's elastic modulus, hardness, and other mechanical properties. The nanoindentation analysis was performed on multiple vapor-diffused Nb3Sn samples coated at Jefferson Lab and Fermilab coating facilities for the first time. This contribution will discuss the first results obtained from the nanoindentation of Nb3Sn-coated Nb samples prepared via the Sn vapor diffusion technique.
△ Less
Submitted 17 July, 2023;
originally announced July 2023.
-
New spin-polarized electron source based on alkali-antimonide photocathode
Authors:
V. S. Rusetsky,
V. A. Golyashov,
S. V. Eremeev,
D. A. Kustov,
I. P. Rusinov,
T. S. Shamirzaev,
A. V. Mironov,
A. Yu. Demin,
O. E. Tereshchenko
Abstract:
New spin-dependent photoemission properties of alkali antimonide semiconductor cathodes are predicted based on the detected optical spin orientation effect and DFT band structure calculations. Using these results, the Na$_2$KSb/Cs$_3$Sb heterostructure is designed as a spin-polarized electron source in combination with the Al$_{0.11}$Ga$_{0.89}$As target as a spin-detector with spatial resolution.…
▽ More
New spin-dependent photoemission properties of alkali antimonide semiconductor cathodes are predicted based on the detected optical spin orientation effect and DFT band structure calculations. Using these results, the Na$_2$KSb/Cs$_3$Sb heterostructure is designed as a spin-polarized electron source in combination with the Al$_{0.11}$Ga$_{0.89}$As target as a spin-detector with spatial resolution. In the Na$_2$KSb/Cs$_3$Sb photocathode, spin-dependent photoemission properties were established through detection of high degree of photoluminescence polarization and high polarization of the photoemitted electrons. It was found that the multi-alkali photocathode can provide electron beams with emittance very close to the limits imposed by the electron thermal energy. The vacuum tablet-type sources of spin-polarized electrons have been proposed for accelerators, that can exclude the construction of the photocathode growth chambers for photoinjectors.
△ Less
Submitted 7 May, 2022;
originally announced May 2022.
-
Plasma Processing for In-Situ Field Emission Mitigation of Superconducting Radiofrequency (SRF) Cryomodules
Authors:
M. Martinello,
P. Berrutti,
B. Giaccone,
S. Belomestnykh,
M. Checchin,
G. V. Eremeev,
A. Grassellino,
T. Khabibouilline,
A. Netepenko,
R. Pilipenko,
A. Romanenko,
S. Posen,
G. Wu,
D. Gonnella,
M. Ross,
J. T. Maniscalco,
T. Powers
Abstract:
Field emission (FE) is one of the main limiting factors of superconducting radio-frequency (SRF) cavities operating in accelerators and it occurs whenever contaminants, like dust, metal flakes or even absorbates, are present on the surface of the cavity high electric field region. Field emission reduces the maximum achievable accelerating field and generates free electrons that may interact with t…
▽ More
Field emission (FE) is one of the main limiting factors of superconducting radio-frequency (SRF) cavities operating in accelerators and it occurs whenever contaminants, like dust, metal flakes or even absorbates, are present on the surface of the cavity high electric field region. Field emission reduces the maximum achievable accelerating field and generates free electrons that may interact with the beam, damage or activate the beamline. One practical method that can be used to mitigate this problem is in-situ plasma cleaning, or plasma processing. The development of a processing that can be applied in-situ is extremely advantageous, since it enables the recovery of the cryomodule performance without the need of disassembling the whole cryomodule, which is an extremely expensive and time-consuming process. On the other hand, plasma processing only requires the cryomodule warm-up to room-temperature and the subsequent processing of the contaminated cavities. The entire process is reasonably quick and involves a limited number of personnel. For these reasons we would like to advocate for continuing to invest in the R\&D of plasma processing to optimize its applicability in cryomodules and for extending the technique to other frequency ranges and cavities geometries.
△ Less
Submitted 23 March, 2022;
originally announced March 2022.
-
Q-factor optimization for high-beta 650 MHz cavities for PIP-II
Authors:
M. Martinello,
D. J. Bice,
C. Boffo,
S. K. Chandrasekeran,
G. V. Eremeev,
F. Furuta,
A. Grassellino,
O. Melnychuk,
D. A. Sergatskov,
G. Wu,
T. C. Reid
Abstract:
High Q-factors are of utmost importance to minimize losses of superconducting radio-frequency cavities deployed in continuous wave particle accelerators. This study elucidates the surface treatment that can maximize the Q-factors in high-beta 650 MHz elliptical niobium cavities. State-of-the-art surface treatments are applied in many single-cell cavities, and surface resistance studies are perform…
▽ More
High Q-factors are of utmost importance to minimize losses of superconducting radio-frequency cavities deployed in continuous wave particle accelerators. This study elucidates the surface treatment that can maximize the Q-factors in high-beta 650 MHz elliptical niobium cavities. State-of-the-art surface treatments are applied in many single-cell cavities, and surface resistance studies are performed to understand the microwave dissipation at this unexplored frequency. The nitrogen doping treatment is confirmed to be necessary to maximize the Q-factors at medium RF fields. We applied this treatment in five-cell high-beta 650 MHz cavities and demonstrated that extremely high Q-factors were obtained at medium RF fields with this treatment. We also demonstrated that adding a cold electropolishing step after N-doping is crucial to push the quench field of multicell cavities to higher gradients.
△ Less
Submitted 2 November, 2021;
originally announced November 2021.
-
Effect of substrate temperature on the growth of Nb3Sn film on Nb by multilayer sputtering
Authors:
Md Nizam Sayeed,
Uttar Pudasaini,
Charles E. Reece,
Grigory V. Eremeev,
Hani E. Elsayed-Ali
Abstract:
Nb3Sn films were fabricated by multilayer sequential sputtering on Nb at substrate temperatures ranging from room temperature to 250 °C. The multilayers were then annealed inside a separate vacuum furnace at 950 °C for 3h. The films material properties were characterized by X-ray diffraction, scanning electron microscopy, energy-dispersive X-ray spectroscopy, atomic force microscopy, and transmiss…
▽ More
Nb3Sn films were fabricated by multilayer sequential sputtering on Nb at substrate temperatures ranging from room temperature to 250 °C. The multilayers were then annealed inside a separate vacuum furnace at 950 °C for 3h. The films material properties were characterized by X-ray diffraction, scanning electron microscopy, energy-dispersive X-ray spectroscopy, atomic force microscopy, and transmission electron microscopy. The films superconducting properties were studied by four-point probe resistivity measurements from room temperature to below the superconducting critical temperature Tc. The highest film Tc was 17.76 K, obtained when the multilayers were deposited at room temperature. A superconducting Nb3Sn thin film with a smoother surface morphology but a lower Tc of 17.58 K was obtained on the film deposited at a substrate temperature of 250 °C.
△ Less
Submitted 19 April, 2022; v1 submitted 15 September, 2021;
originally announced September 2021.
-
Properties of Nb3Sn films fabricated by magnetron sputtering from a single target
Authors:
Md. Nizam Sayeed,
Uttar Pudasaini,
Charles E. Reece,
Grigory V. Eremeev,
Hani E. Elsayed-Ali
Abstract:
Superconducting Nb3Sn films were fabricated on sapphire and fine grain Nb substrates by magnetron sputtering from a single stoichiometric Nb3Sn target. The structural, morphological and superconducting properties of the films annealed for 24 h at temperatures of 800-1000 °C were investigated. The effect of the annealing time at 1000 °C was examined for 1, 12, and 24 h. The film properties were cha…
▽ More
Superconducting Nb3Sn films were fabricated on sapphire and fine grain Nb substrates by magnetron sputtering from a single stoichiometric Nb3Sn target. The structural, morphological and superconducting properties of the films annealed for 24 h at temperatures of 800-1000 °C were investigated. The effect of the annealing time at 1000 °C was examined for 1, 12, and 24 h. The film properties were characterized by X-ray diffraction, scanning electron microscopy, atomic force microscopy, energy dispersive X-ray spectroscopy, and Raman spectroscopy. The DC superconducting properties of the films were characterized by a four-point probe measurement down to cryogenic temperatures. The RF surface resistance of films was measured over a temperature range of 6-23 K using a 7.4 GHz sapphire-loaded Nb cavity. As-deposited Nb3Sn films on sapphire had a superconducting critical temperature of 17.21 K, which improved to 17.83 K when the film was annealed at 800 °C for 24 h. For the films annealed at 1000 °C, the surface Sn content was reduced to ~11.3 % for an annealing time of 12 h and to ~4.1 % for an annealing time of 24 h. The Raman spectra of the films confirmed the microstructural evolution after annealing. The RF superconducting critical temperature of the as-deposited Nb3Sn films on Nb was 16.02 K, which increased to 17.44 K when the film was annealed at 800 °C for 24 h.
△ Less
Submitted 14 July, 2020;
originally announced July 2020.
-
Effect of layer thickness on structural, morphological and superconducting properties of Nb$_3$Sn films fabricated by multilayer sequential sputtering
Authors:
Md Nizam Sayeed,
Uttar Pudasaini,
Charles E Reece,
Grigory V Eremeev,
Hani E Elsayed-Ali
Abstract:
Superconducting Nb3Sn films can be synthesized by controlling the atomic concentration of Sn. Multilayer sequential sputtering of Nb and Sn thin films followed by high temperature annealing is considered as a method to fabricate Nb3Sn films, where the Sn composition of the deposited films can be controlled by the thickness of alternating Nb and Sn layers. We report on the structural, morphological…
▽ More
Superconducting Nb3Sn films can be synthesized by controlling the atomic concentration of Sn. Multilayer sequential sputtering of Nb and Sn thin films followed by high temperature annealing is considered as a method to fabricate Nb3Sn films, where the Sn composition of the deposited films can be controlled by the thickness of alternating Nb and Sn layers. We report on the structural, morphological and superconducting properties of Nb3Sn films fabricated by multilayer sequential sputtering of Nb and Sn films on sapphire substrates followed by annealing at 950 °C for 3 h. We have investigated the effect of Nb and Sn layer thickness and Nb:Sn ratio on the properties of the Nb3Sn films. The crystal structure, surface morphology, surface topography, and film composition were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), atomic force microscopy (AFM), and energy dispersive X-ray spectroscopy (EDS). The results showed Sn loss from the surface due to evaporation during annealing. Superconducting Nb3Sn films of critical temperature up to 17.93 K were fabricated.
△ Less
Submitted 22 April, 2020;
originally announced April 2020.
-
Analysis of RF losses and material characterization of samples removed from a Nb3Sn-coated superconducting RF cavity
Authors:
Uttar Pudasaini,
Grigory V. Eremeev,
Charles E. Reece,
James Tuggle,
Michael J. Kelley
Abstract:
Nb3Sn (Tc ~ 18 K and Hsh ~ 400 mT) is a prospective material to replace Nb (Tc ~ 9 K and Hsh ~ 200 mT) in SRF accelerator cavities for significant cost reduction and performance enhancement. Because of its material properties, Nb3Sn is best employed as a thin film (coating) inside an already built RF cavity structure. A particular test cavity noted as C3C4 was a 1.5 GHz single-cell Nb cavity, coat…
▽ More
Nb3Sn (Tc ~ 18 K and Hsh ~ 400 mT) is a prospective material to replace Nb (Tc ~ 9 K and Hsh ~ 200 mT) in SRF accelerator cavities for significant cost reduction and performance enhancement. Because of its material properties, Nb3Sn is best employed as a thin film (coating) inside an already built RF cavity structure. A particular test cavity noted as C3C4 was a 1.5 GHz single-cell Nb cavity, coated with Nb3Sn using Sn vapor diffusion process at Jefferson Lab. Cold measurements of the coated cavity indicated the superconducting transition temperature of about 18 K. Subsequent RF measurements indicated field-dependent surface resistance both at 4.3 K and 2.0 K. After initial cold measurements, the cavity RF loss distribution was studied with a thermometry mapping system. Loss regions were identified with thermometry and were cut out for material analysis. The presence of significantly thin patchy regions and other carbon-rich defects is associated with strong local field-dependent surface resistance. This paper summarizes RF and thermometry results correlated with material science findings.
△ Less
Submitted 12 September, 2019;
originally announced September 2019.
-
Towards a random laser with cold atoms
Authors:
William Guerin,
Nicolas Mercadier,
Franck Michaud,
Davide Brivio,
Luis S. Froufe-Pérez,
Rémi Carminati,
Vitalie Eremeev,
Arthur Goetschy,
Sergey E. Skipetrov,
Robin Kaiser
Abstract:
Atoms can scatter light and they can also amplify it by stimulated emission.
From this simple starting point, we examine the possibility of realizing a random laser in a cloud of laser-cooled atoms. The answer is not obvious as both processes (elastic scattering and stimulated emission) seem to exclude one another: pumping atoms to make them behave as amplifier reduces drastically their scatte…
▽ More
Atoms can scatter light and they can also amplify it by stimulated emission.
From this simple starting point, we examine the possibility of realizing a random laser in a cloud of laser-cooled atoms. The answer is not obvious as both processes (elastic scattering and stimulated emission) seem to exclude one another: pumping atoms to make them behave as amplifier reduces drastically their scattering cross-section. However, we show that even the simplest atom model allows the efficient combination of gain and scattering. Moreover, supplementary degrees of freedom that atoms offer allow the use of several gain mechanisms, depending on the pumping scheme. We thus first study these different gain mechanisms and show experimentally that they can induce (standard) lasing. We then present how the constraint of combining scattering and gain can be quantified, which leads to an evaluation of the random laser threshold. The results are promising and we draw some prospects for a practical realization of a random laser with cold atoms.
△ Less
Submitted 22 July, 2009; v1 submitted 3 June, 2009;
originally announced June 2009.
-
The size impact on evolutionary dynamics of agents-cluster
Authors:
Vitalie Eremeev,
Ion Rasca,
Florentin Paladi
Abstract:
A cluster theory based mathematical model was developed and used to simulate the dynamics of a system composed of a large number of interacting agents-clusters with different size. The case of a system formed by a constant total number of economic units (agents) in metastable (partial) equilibrium was considered, and the size effect on the formation of the groups (clusters) of agents was particu…
▽ More
A cluster theory based mathematical model was developed and used to simulate the dynamics of a system composed of a large number of interacting agents-clusters with different size. The case of a system formed by a constant total number of economic units (agents) in metastable (partial) equilibrium was considered, and the size effect on the formation of the groups (clusters) of agents was particularly elucidated. We prove that the fragmentation and coagulation rates of groups of agents definitely depend on the size of the group.
△ Less
Submitted 25 April, 2003;
originally announced April 2003.
