-
Aalto-1, multi-payload CubeSat: design, integration and launch
Authors:
J. Praks,
M. Rizwan Mughal,
R. Vainio,
P. Janhunen,
J. Envall,
P. Oleynik,
A. Näsilä,
H. Leppinen,
P. Niemelä,
A. Slavinskis,
J. Gieseler,
P. Toivanen,
T. Tikka,
T. Peltola,
A. Bosser,
G. Schwarzkopf,
N. Jovanovic,
B. Riwanto,
A. Kestilä,
A. Punkkinen,
R. Punkkinen,
H. -P. Hedman,
T. Säntti,
J. -O. Lill,
J. M. K. Slotte
, et al. (2 additional authors not shown)
Abstract:
The design, integration, testing, and launch of the first Finnish satellite Aalto-1 is briefly presented in this paper. Aalto-1, a three-unit CubeSat, launched into Sun-synchronous polar orbit at an altitude of approximately 500 km, is operational since June 2017. It carries three experimental payloads: Aalto Spectral Imager (AaSI), Radiation Monitor (RADMON), and Electrostatic Plasma Brake (EPB).…
▽ More
The design, integration, testing, and launch of the first Finnish satellite Aalto-1 is briefly presented in this paper. Aalto-1, a three-unit CubeSat, launched into Sun-synchronous polar orbit at an altitude of approximately 500 km, is operational since June 2017. It carries three experimental payloads: Aalto Spectral Imager (AaSI), Radiation Monitor (RADMON), and Electrostatic Plasma Brake (EPB). AaSI is a hyperspectral imager in visible and near-infrared (NIR) wavelength bands, RADMON is an energetic particle detector and EPB is a de-orbiting technology demonstration payload. The platform was designed to accommodate multiple payloads while ensuring sufficient data, power, radio, mechanical and electrical interfaces. The design strategy of platform and payload subsystems consists of in-house development and commercial subsystems. The CubeSat Assembly, Integration & Test (AIT) followed Flatsat -- Engineering-Qualification Model (EQM) -- Flight Model (FM) model philosophy for qualification and acceptance.
The paper briefly describes the design approach of platform and payload subsystems, their integration and test campaigns, and spacecraft launch. The paper also describes the ground segment & services that were developed by the Aalto-1 team.
△ Less
Submitted 26 January, 2021;
originally announced January 2021.
-
FORESAIL-1 cubesat mission to measure radiation belt losses and demonstrate de-orbiting
Authors:
FORESAIL collaboration,
M. Palmroth,
J. Praks,
R. Vainio,
P. Janhunen,
E. K. J. Kilpua,
N. Yu. Ganushkina,
A. Afanasiev,
M. Ala-Lahti,
A. Alho,
T. Asikainen,
E. Asvestari,
M. Battarbee,
A. Binios,
A. Bosser,
T. Brito,
J. Envall,
U. Ganse,
H. George,
J. Gieseler,
S. Good,
M. Grandin,
S. Haslam,
H. -P. Hedman,
H. Hietala
, et al. (35 additional authors not shown)
Abstract:
Today, the near-Earth space is facing a paradigm change as the number of new spacecraft is literally sky-rocketing. Increasing numbers of small satellites threaten the sustainable use of space, as without removal, space debris will eventually make certain critical orbits unusable. A central factor affecting small spacecraft health and leading to debris is the radiation environment, which is unpred…
▽ More
Today, the near-Earth space is facing a paradigm change as the number of new spacecraft is literally sky-rocketing. Increasing numbers of small satellites threaten the sustainable use of space, as without removal, space debris will eventually make certain critical orbits unusable. A central factor affecting small spacecraft health and leading to debris is the radiation environment, which is unpredictable due to an incomplete understanding of the near-Earth radiation environment itself and its variability driven by the solar wind and outer magnetosphere. This paper presents the FORESAIL-1 nanosatellite mission, having two scientific and one technological objectives. The first scientific objective is to measure the energy and flux of energetic particle loss to the atmosphere with a representative energy and pitch angle resolution over a wide range of magnetic local times. To pave the way to novel model - in situ data comparisons, we also show preliminary results on precipitating electron fluxes obtained with the new global hybrid-Vlasov simulation Vlasiator. The second scientific objective of the FORESAIL-1 mission is to measure energetic neutral atoms (ENAs) of solar origin. The solar ENA flux has the potential to contribute importantly to the knowledge of solar eruption energy budget estimations. The technological objective is to demonstrate a satellite de-orbiting technology, and for the first time, make an orbit manoeuvre with a propellantless nanosatellite. FORESAIL-1 will demonstrate the potential for nanosatellites to make important scientific contributions as well as promote the sustainable utilisation of space by using a cost-efficient de-orbiting technology.
△ Less
Submitted 23 May, 2019;
originally announced May 2019.
-
E-sail test payload of ESTCube-1 nanosatellite
Authors:
Jouni Envall,
Pekka Janhunen,
Petri Toivanen,
Mihkel Pajusalu,
Erik Ilbis,
Jaanus Kalde,
Matis Averin,
Henri Kuuste,
Kaspars Laizans,
Viljo Allik,
Timo Rauhala,
Henri Seppänen,
Sergiy Kiprich,
Jukka Ukkonen,
Edward Haeggström,
Taneli Kalvas,
Olli Tarvainen,
Janne Kauppinen,
Antti Nuottajärvi,
Hannu Koivisto
Abstract:
The scientific mission of ESTCube-1, launched in May 2013, is to measure the Electric solar wind sail (E-sail) force in orbit. The experiment is planned to push forward the development of E-sail, a propulsion method recently invented at the Finnish Meteorological Institute. E-sail is based on extracting momentum from the solar wind plasma flow by using long thin electrically charged tethers. ESTCu…
▽ More
The scientific mission of ESTCube-1, launched in May 2013, is to measure the Electric solar wind sail (E-sail) force in orbit. The experiment is planned to push forward the development of E-sail, a propulsion method recently invented at the Finnish Meteorological Institute. E-sail is based on extracting momentum from the solar wind plasma flow by using long thin electrically charged tethers. ESTCube-1 is equipped with one such tether, together with hardware capable of deploying and charging it. At the orbital altitude of ESTCube-1 (660--680~km) there is no solar wind present. Instead, ESTCube-1 shall observe the interaction between the charged tether and the ionospheric plasma. The ESTCube-1 payload uses a 10-meter, partly two-filament E-sail tether and a motorized reel on which it is stored. The tether shall be deployed from a spinning satellite with the help of centrifugal force. An additional mass is added at the tip of the tether to assist with the deployment. During E-sail experiment the tether shall be charged to 500~V potential. Both positive and negative voltages shall be experimented with. The voltage is provided by a dedicated high voltage source and delivered to the tether through a slip ring contact. When the negative voltage is applied to the tether, the satellite body is expected to attract electron flow capable of compensating for the ion flow, which runs to the tether from the surrounding plasma. With the positive voltage applied, onboard cold cathode electron guns are used to remove excess electrons to maintain the positive voltage of the tether. In this paper we present the design and structure of the tether payload of ESTCube-1.
△ Less
Submitted 28 April, 2014;
originally announced April 2014.
