-
Broadband terahertz near-field excitation and detection of silicon photonic crystal modes
Authors:
Kseniia Lezhennikova,
Sahand Mahmoodian,
Boris T. Kuhlmey,
Redha Abdeddaim,
Stefan Enoch,
C. Martijn de Sterke,
Alessandro Tuniz
Abstract:
Chip-based terahertz (THz) devices are emerging as versatile tools for manipulating mm-wave frequencies in the context of integrated high-speed communication technologies for potential sixth-generation (6G) wireless applications. The characterization of THz devices is typically performed using far-field techniques that provide limited information about the underlying physical mechanisms producing…
▽ More
Chip-based terahertz (THz) devices are emerging as versatile tools for manipulating mm-wave frequencies in the context of integrated high-speed communication technologies for potential sixth-generation (6G) wireless applications. The characterization of THz devices is typically performed using far-field techniques that provide limited information about the underlying physical mechanisms producing them. As the library of chip-based functionalities expands, e.g., for tailoring the emission and directional propagation properties of THz antennas and waveguides, novel characterization techniques will likely be beneficial for observing subtle effects that are sensitive to a device's structural parameters. Here we present near-field measurements showing the emission properties of a broadband THz emitter placed in the vicinity of a photonic crystal (PHC) slab. These experiments reveal long-predicted emission properties, but which to our knowledge have yet to be experimentally observed at THz frequencies. We demonstrate three distinct effects between 0.3-0.5 THz: (i) field suppression at frequencies corresponding to quasi-TE bandgaps (ii) a frequency-dependent directed emission along two distinct pathways for two neighboring frequencies, resulting in a local field concentration; (iii) a re-direction of the emission, achieved by rotating the PHC with respect to the dipole orientation. Simulations reveal that the observed behavior can be predicted from the underlying band structure. Our results highlight the opportunities that PHCs can potentially provide for alignment-free, chip-based 6G technologies. Our experimental technique extends the applicability realms of THz spectroscopy and will find use for characterizing the THz modes supported by true samples, whose inherent imperfections cannot realistically be accounted for by simulations, particularly in highly dispersive frequency bands.
△ Less
Submitted 26 October, 2023; v1 submitted 2 October, 2023;
originally announced October 2023.
-
Anomalous Reflection From Hyperbolic Media
Authors:
Ilya Deriy,
Kseniia Lezhennikova,
Stanislav Glybovsky,
Ivan Iorsh,
Oleh Yermakov,
Mingzhao Song,
Redha Abdeddaim,
Stefan Enoch,
Pavel Belov,
Andrey Bogdanov
Abstract:
Despite the apparent simplicity, the problem of refraction of electromagnetic waves at the planar interface between two media has an incredibly rich spectrum of unusual phenomena. An example is the paradox that occurs when an electromagnetic wave is incident on the interface between a hyperbolic medium and an isotropic dielectric. At certain orientations of the optical axis of the hyperbolic mediu…
▽ More
Despite the apparent simplicity, the problem of refraction of electromagnetic waves at the planar interface between two media has an incredibly rich spectrum of unusual phenomena. An example is the paradox that occurs when an electromagnetic wave is incident on the interface between a hyperbolic medium and an isotropic dielectric. At certain orientations of the optical axis of the hyperbolic medium relative to the interface, the reflected and transmitted waves are completely absent. In this paper, we formulate the aforementioned paradox and present its resolution by introduction of infinitesimal losses in a hyperbolic medium. We show that the reflected wave exists, but became extremely decaying as the loss parameter tends to zero. As a consequence, all the energy scattered into the reflected channel is absorbed at the interface. We support our reasoning with analytical calculations, numerical simulations, and an experiment with self-complementary metasurfaces in the microwave region. In addition to the great fundamental interest, this paradox resolution discovers a plethora of applications for the reflectors, refractors, absorbers, lenses, antennas, camouflage and holography applications.
△ Less
Submitted 16 January, 2024; v1 submitted 21 August, 2023;
originally announced August 2023.
-
Robust collimated beaming in 3D acoustic sonic crystals
Authors:
A. L. Vanel,
M. Dubois,
C. Tronche,
S. Fu,
Y. -T. Wang,
G. Dupont,
A. D. Rakić,
K. Bertling,
R. Abdeddaim,
S. Enoch,
R. V. Craster,
G. Li,
S. Guenneau,
J. Perchoux
Abstract:
We demonstrate strongly collimated beaming, at audible frequencies, in a three-dimensional acoustic phononic crystal where the wavelength is commensurate with the crystal elements; the crystal is a seemingly simple rectangular cuboid constructed from closely-spaced spheres, and yet demonstrates rich wave phenomena acting as a canonical three-dimensional metamaterial. We employ theory, numerical si…
▽ More
We demonstrate strongly collimated beaming, at audible frequencies, in a three-dimensional acoustic phononic crystal where the wavelength is commensurate with the crystal elements; the crystal is a seemingly simple rectangular cuboid constructed from closely-spaced spheres, and yet demonstrates rich wave phenomena acting as a canonical three-dimensional metamaterial. We employ theory, numerical simulation and experiments to design and interpret this collimated beaming phenomenon and use a crystal consisting of a finite rectangular cuboid array of $4\times 10\times 10$ polymer spheres $1.38$~cm in diameter in air, arranged in a primitive cubic cell with the centre-to-centre spacing of the spheres, i.e. the pitch, as $1.5$~cm. Collimation effects are observed in the time domain for chirps with central frequencies at $14.2$~kHz and $18$~kHz, and we deployed a laser feedback interferometer or Self-Mixing Interferometer (SMI) -- a recently proposed technique to observe complex acoustic fields -- that enables experimental visualisation of the pressure field both within the crystal and outside of the crystal. Numerical exploration using a higher-order multi-scale finite element method designed for the rapid and detailed simulation of 3D wave physics further confirms these collimation effects and cross-validates with the experiments. Interpretation follows using High Frequency Homogenization and Bloch analysis whereby the different origin of the collimation at these two frequencies is revealed by markedly different isofrequency surfaces of the sonic crystal.
△ Less
Submitted 23 January, 2023;
originally announced January 2023.
-
Neolithic stone settlements as locally resonant metasurfaces
Authors:
Stéphane Brûlé,
Bogdan Ungureanu,
Stefan Enoch,
Sébastien Guenneau
Abstract:
We study the dynamic surface response of neolithic stone settlements obtained with seismic ambient noise techniques near the city of Carnac in French Brittany. Surprisingly, we find that menhirs (neolithic human size standing alone granite stones) with an aspect ratio between 1 and 2 periodically arranged atop a thin layer of sandy soil laid on a granite bedrock, exhibit fundamental resonances in…
▽ More
We study the dynamic surface response of neolithic stone settlements obtained with seismic ambient noise techniques near the city of Carnac in French Brittany. Surprisingly, we find that menhirs (neolithic human size standing alone granite stones) with an aspect ratio between 1 and 2 periodically arranged atop a thin layer of sandy soil laid on a granite bedrock, exhibit fundamental resonances in the range of 10 to 25 Hz. We propose an analogic Kelvin-Voigt viscoelastic model that explains the origin of such low frequency resonances. We further explore low frequency filtering effect with full wave finite element simulations. Our numerical results confirm the bending nature of fundamental resonances of the menhirs and further suggest additional resonances of rotational and longitudinal nature in the frequency range 25 to 50 Hz. Our study thus paves the way for large scale seismic metasurfaces consisting of granite stones periodically arranged atop a thin layer of regolith over a bedrock, for ground vibration mitigation in earthquake engineering.
△ Less
Submitted 21 June, 2022;
originally announced June 2022.
-
Design considerations for a new generation of SiPMs with unprecedented timing resolution
Authors:
S. Enoch,
A. Gola,
P. Lecoq,
A. Rivetti
Abstract:
The potential of photon detectors to achieve precise timing information is of increasing importance in many domains, PET and CT scanners in medical imaging and particle physics detectors, amongst others. The goal to increase by an order of magnitude the sensitivity of PET scanners and to deliver, via time-of-flight (TOF), true space points for each event, as well as the constraints set by future p…
▽ More
The potential of photon detectors to achieve precise timing information is of increasing importance in many domains, PET and CT scanners in medical imaging and particle physics detectors, amongst others. The goal to increase by an order of magnitude the sensitivity of PET scanners and to deliver, via time-of-flight (TOF), true space points for each event, as well as the constraints set by future particle accelerators require a further leap in time resolution of scintillator-based ionizing radiation detectors, reaching eventually a few picoseconds resolution for sub MeV energy deposits. In spite of the impressive progress made in the last decade by several manufacturers, the Single Photon Time Resolution (SPTR) of SiPMs is still in the range of 70-120ps FWHM, whereas a value of 10ps or even less would be desirable. Such a step requires a break with traditional methods and the development of novel technologies. The possibility of combining the extraordinary potential of nanophotonics with new approaches offered by modern microelectronics and 3D electronic integration opens novel perspectives for the development of a new generation of metamaterial-based SiPMs with unprecedented photodetection efficiency and timing resolution.
△ Less
Submitted 8 January, 2021;
originally announced January 2021.
-
On the possibility of seismic rogue waves in very soft soils
Authors:
Stephane Brule,
Stefan Enoch,
Sebastien Guenneau
Abstract:
Liquid wave studies have shown that under certain constructive interference conditions, an abnormal size wave could be generated at a specific point. This type of wave, described long ago in the literature, was named 'Draupner Wave' in 1995. It was the first rogue wave, more than ten meters high, to be detected by a measuring instrument, occurring at the Draupner platform in the North Sea off the…
▽ More
Liquid wave studies have shown that under certain constructive interference conditions, an abnormal size wave could be generated at a specific point. This type of wave, described long ago in the literature, was named 'Draupner Wave' in 1995. It was the first rogue wave, more than ten meters high, to be detected by a measuring instrument, occurring at the Draupner platform in the North Sea off the coast of Norway. For very soft and thick soils in continental sedimentary basin, with high water content, low shear wave velocity and wave bouncing effects on the edges of the basin, one can question the theoretical existence of such a type of freak waves that may have come unnoticed amongst surface seismic waves. This short communication presents recent observations and the conditions and limits of the analogy between gravity and seismic waves.
△ Less
Submitted 13 April, 2020;
originally announced April 2020.
-
Photosensitive chalcogenide metasurfaces supporting bound states in the continuum
Authors:
Elena Mikheeva,
Kirill Koshelev,
Duk-Yong Choi,
Sergey Kruk,
Julien Lumeau,
Redha Abdeddaim,
Ivan Voznyuk,
Stefan Enoch,
Yuri Kivshar
Abstract:
We study, both theoretically and experimentally, tunable metasurfaces supporting sharp Fano-resonances inspired by optical bound states in the continuum. We explore the use of arsenic trisulfide (a photosensitive chalcogenide glass) having optical properties which can be finely tuned by light absorption at the post-fabrication stage. We select the resonant wavelength of the metasurface correspondi…
▽ More
We study, both theoretically and experimentally, tunable metasurfaces supporting sharp Fano-resonances inspired by optical bound states in the continuum. We explore the use of arsenic trisulfide (a photosensitive chalcogenide glass) having optical properties which can be finely tuned by light absorption at the post-fabrication stage. We select the resonant wavelength of the metasurface corresponding to the energy below the arsenic trisulfide bandgap, and experimentally control the resonance spectral position via exposure to the light of energies above the bandgap.
△ Less
Submitted 24 October, 2019;
originally announced October 2019.
-
Seismic wave shield using cubic arrays of split-ball resonators
Authors:
Bogdan Ungureanu,
Younes Achaoui,
Stephane Brule,
Stefan Enoch,
Richard Craster,
Sebastien Guenneau
Abstract:
Metre size inertial resonators located in the ground have been theoretically shown to interact with a seismic wave (attenuation, band gaps) to enable protection of surface structures such as buildings. The challenge for Civil Engineering is to both reduce the size of these resonators and to increase their efficiency. Here we explore steel spheres, connected to a concrete bulk medium, either by a c…
▽ More
Metre size inertial resonators located in the ground have been theoretically shown to interact with a seismic wave (attenuation, band gaps) to enable protection of surface structures such as buildings. The challenge for Civil Engineering is to both reduce the size of these resonators and to increase their efficiency. Here we explore steel spheres, connected to a concrete bulk medium, either by a coating of rubber, or rubber and steel ligaments, or air and steel ligaments. We show that for a cubic lattice periodicity of 1 metre, we achieve stop bands in the frequency range 14 to 20 Hz; by splitting spheres in 2 and 8 pieces, we tune down the stop bands frequencies and further increase their bandwidth. We thus demonstrate we are able to provide a variety of inertial resonators with stop bands below 10 Hz i.e., in the frequency range of interest for earthquake engineering.
△ Less
Submitted 22 April, 2019;
originally announced April 2019.
-
Role of nanophotonics in the birth of seismic megastructures
Authors:
Stéphane Brûlé,
Stefan Enoch,
Sébastien Guenneau
Abstract:
The discovery of photonic crystals thirty years ago, in conjunction with research advances in plasmonics and metamaterials, has inspired the concept of decameter scale metasurfaces, coined seismic metamaterials, for an enhanced control of surface (Love and Rayleigh) and bulk (shear and pressure) elastodynamic waves. The powerful mathematical tools of coordinate transforms, effective medium and Flo…
▽ More
The discovery of photonic crystals thirty years ago, in conjunction with research advances in plasmonics and metamaterials, has inspired the concept of decameter scale metasurfaces, coined seismic metamaterials, for an enhanced control of surface (Love and Rayleigh) and bulk (shear and pressure) elastodynamic waves. The powerful mathematical tools of coordinate transforms, effective medium and Floquet-Bloch theories, which have revolutionized nanophotonics, can be translated in the language of civil engineering and geophysics. Experiments on seismic metamaterials made of buried elements in the soil demonstrate that the fore mentioned tools make possible a novel description of complex phenomena of soil-structure interaction during a seismic disturbance. But the concepts are already moving to more futuristic concepts and the same notions developed for structured soils are now used to examine the effects of buildings viewed as above surface resonators in megastructures such as metacities. But this perspective of the future should not make us forget the heritage of the ancient peoples. Indeed, we finally point out the striking similarity between an invisibility cloak design and the architecture of some ancient megastructures as antique Gallo-Roman theaters and amphitheatres.
△ Less
Submitted 9 April, 2019;
originally announced April 2019.
-
The influence of building interactions on seismic and elastic surface waves
Authors:
Bogdan Ungureanu,
Sébastien Guenneau,
Younes Achaoui,
Andre Diatta,
Mohamed Farhat,
Harsha Hutridurga,
Richard V Craster,
Stefan Enoch,
Stéphane Brûlé
Abstract:
We outline some recent research advances on the control of elastic waves in thin and thick plates, that have occurred since the large scale experiment [Phys. Rev. Lett. 112, 133901, 2014] that demonstrated significant interaction of surface seismic waves with holes structuring sedimentary soils at the meter scale. We further investigate the seismic wave trajectories in soils structured with buildi…
▽ More
We outline some recent research advances on the control of elastic waves in thin and thick plates, that have occurred since the large scale experiment [Phys. Rev. Lett. 112, 133901, 2014] that demonstrated significant interaction of surface seismic waves with holes structuring sedimentary soils at the meter scale. We further investigate the seismic wave trajectories in soils structured with buildings. A significant substitution of soils by inclusions, acting as foundations, raises the question of the effective dynamic properties of these structured soils. Buildings, in the case of perfect elastic conditions for both soil and buildings, are shown to interact and strongly influence elastic surface waves; such site-city seismic interactions were pointed out in [Bulletin of Seismological Society of America 92, 794-811, 2002], and we investigate a variety of scenarios to illustrate the variety of behaviours possible.
△ Less
Submitted 8 April, 2019;
originally announced April 2019.
-
Direct imaging of the energy transfer enhancement between two dipoles in a photonic cavity
Authors:
Kaizad Rustomji,
Marc Dubois,
Boris Kuhlmey,
C. Martijn de Sterke,
Stefan Enoch,
Redha Abdeddaim,
Jérôme Wenger
Abstract:
Photonic cavities are gathering a large interest to enhance the energy transfer between two dipoles, with far-reaching consequences for applications in photovoltaics, lighting sources and molecular biosensing. However, experimental difficulties in controlling the dipoles' positions, orientations and spectra have limited the earlier work in the visible part of the spectrum, and have led to inconsis…
▽ More
Photonic cavities are gathering a large interest to enhance the energy transfer between two dipoles, with far-reaching consequences for applications in photovoltaics, lighting sources and molecular biosensing. However, experimental difficulties in controlling the dipoles' positions, orientations and spectra have limited the earlier work in the visible part of the spectrum, and have led to inconsistent results. Here, we directly map the energy transfer of microwaves between two dipoles inside a resonant half-wavelength cavity with ultrahigh control in space and frequency. Our approach extends Förster resonance energy transfer (FRET) theory to microwave frequencies, and bridges the gap between the descriptions of FRET using quantum electrodynamics and microwave engineering. Beyond the conceptual interest, we show how this approach can be used to optimize the design of photonic cavities to enhance dipole-dipole interactions and FRET.
△ Less
Submitted 7 February, 2019;
originally announced February 2019.
-
Acoustic flat lensing using an indefinite medium
Authors:
M. Dubois,
J. Perchoux,
A. L. Vanel,
C. Tronche,
Y. Achaoui,
G. Dupont,
K. Bertling,
A. D. Rakic,
T. Antonakakis,
S. Enoch,
R. Abdeddaim,
R. V. Craster,
S. Guenneau
Abstract:
Acoustic flat lensing is achieved here by tuning a phononic array to have indefinite medium behaviour in a narrow frequency spectral region along the acoustic branch. This is confirmed by the occurrence of a flat band along an unusual path in the Brillouin zone and by interpreting the intersection point of isofrequency contours on the corresponding isofrequency surface; coherent directive beams ar…
▽ More
Acoustic flat lensing is achieved here by tuning a phononic array to have indefinite medium behaviour in a narrow frequency spectral region along the acoustic branch. This is confirmed by the occurrence of a flat band along an unusual path in the Brillouin zone and by interpreting the intersection point of isofrequency contours on the corresponding isofrequency surface; coherent directive beams are formed whose reflection from the array surfaces create lensing. Theoretical predictions are corroborated by time-domain experiments, airborne acoustic waves generated by a source with a frequency centered about $10.6$ kHz, placed at three different distances from one side of a finite phononic crystal slab, constructed from polymeric spheres, yield distinctive focal spots on the other side. These experiments evaluate the pressure field using optical feedback interferometry and demonstrate precise control of the three-dimensional wave trajectory through a sonic crystal.
△ Less
Submitted 2 October, 2018;
originally announced October 2018.
-
Experimental evidence of auxetic features in seismic metamaterials: Ellipticity of seismic Rayleigh waves for subsurface architectured ground with holes
Authors:
Stephane Brule,
Stefan Enoch,
Sebastien Guenneau
Abstract:
Structured soils with regular meshes of metric size holes implemented in first ten meters of the ground have been theoretically and experimentally tested under seismic disturbance this last decade. Structured soils with rigid inclusions embedded in a substratum have been also recently developed. The influence of these inclusions in the ground can be characterized in different ways: redistribution…
▽ More
Structured soils with regular meshes of metric size holes implemented in first ten meters of the ground have been theoretically and experimentally tested under seismic disturbance this last decade. Structured soils with rigid inclusions embedded in a substratum have been also recently developed. The influence of these inclusions in the ground can be characterized in different ways: redistribution of energy within the network with focusing effects for seismic metamaterials, wave reflection, frequency filtering, reduction of the amplitude of seismic signal energy, etc. Here we first provide some time-domain analysis of the flat lens effect in conjunction with some form of external cloaking of Rayleigh waves and then we experimentally show the effect of a finite mesh of cylindrical holes on the ellipticity of the surface Rayleigh waves at the level of the Earth's surface. Orbital diagrams in time domain are drawn for the surface particle's velocity in vertical (x,z) and horizontal (x,y) planes. These results enable us to observe that the mesh of holes locally creates a tilt of the axes of the ellipse and changes the direction of particle movement. Interestingly, changes of Rayleigh waves ellipticity can be interpreted as changes of an effective Poisson ratio. However, the proximity of the source is also important to explain the shape of the ellipses. We analyze these observations in terms of wave mode conversions inside the mesh and we propose to broaden the discussion on the complexity of seismic wave phenomena in structured soils such as soils foundations and on the coupling effects specific to the soil-structure interaction.
△ Less
Submitted 16 September, 2018;
originally announced September 2018.
-
Low frequency acoustic stop bands in cubic arrays of thick spherical shells with holes
Authors:
Guillaume Dupont,
Alexander Movchan,
Stefan Enoch,
Sebastien Guenneau
Abstract:
We analyse the propagation of pressure waves within a fluid filled with a three-dimensional array of rigid coated spheres (shells). We first draw band diagrams for corresponding Floquet-Bloch waves. We then dig a channel terminated by a cavity within each rigid shell and observe the appearance of a low frequency stop band. The underlying mechanism is that each holey shell now acts as a Helmholtz r…
▽ More
We analyse the propagation of pressure waves within a fluid filled with a three-dimensional array of rigid coated spheres (shells). We first draw band diagrams for corresponding Floquet-Bloch waves. We then dig a channel terminated by a cavity within each rigid shell and observe the appearance of a low frequency stop band. The underlying mechanism is that each holey shell now acts as a Helmholtz resonator supporting a low frequency localized mode: Upon resonance, pressure waves propagate with fast oscillations in the thin water channel drilled in each shell and are localized in each fluid filled inner cavity. The array of fluid filled shells is approximated by a simple mechanical model of springs and masses allowing for asymptotic estimates of the low frequency stop band. We finally propose a realistic design of periodic macrocell with a large defect surrounded by 26 resonators connected by thin straight rigid wires, which supports a localized mode in the low frequency stop band.
△ Less
Submitted 29 December, 2017;
originally announced February 2018.
-
Emergence of Seismic Metamaterials: Current State and Future Perspectives
Authors:
Stéphane Brûlé,
Stefan Enoch,
Sébastien Guenneau
Abstract:
Following the advent of electromagnetic metamaterials at the turn of the century, researchers working in other areas of wave physics have translated concepts of electromagnetic metamaterials to acoustics, elastodynamics, as well as to heat, mass and light diffusion processes. In elastodynamics, seismic metamaterials have emerged in the last decade for soft soils structured at the meter scale, and…
▽ More
Following the advent of electromagnetic metamaterials at the turn of the century, researchers working in other areas of wave physics have translated concepts of electromagnetic metamaterials to acoustics, elastodynamics, as well as to heat, mass and light diffusion processes. In elastodynamics, seismic metamaterials have emerged in the last decade for soft soils structured at the meter scale, and have been tested thanks to full-scale experiments on holey soils five years ago. Born in the soil, seismic metamaterials grow simultaneously on the field of tuned-resonators buried in the soil, around building's foundations or near the soil-structure's interface, and on the field of above-surface resonators. In this perspective article, we quickly recall some research advances made in all these types of seismic metamaterials and we further dress an inventory of which material parameters can be achieved and which cannot, notably from the effective medium theory perspective. We finally envision perspectives on future developments of large scale auxetic metamaterials for building's foundations, forests of trees for seismic protection and metamaterial-like transformed urbanism at the city scale.
△ Less
Submitted 25 December, 2017;
originally announced December 2017.
-
A Novel Metamaterial-Inspired RF-coil for Preclinical Dual-Nuclei MRI
Authors:
A. Hurshkainen,
A. Nikulin,
E. Georget,
B. Larrat,
D. Berrahou,
L. Neves,
P. Sabouroux,
S. Enoch,
I. Melchakova,
P. Belov,
S. Glybovski,
R. Abdeddaim
Abstract:
In this paper we propose, design and test a new dual-nuclei RF-coil inspired by wire metamaterial structures. The coil operates due to resonant excitation of hybridized eigenmodes in multimode flat periodic structures comprising several coupled thin metal strips. It was shown that the field distribution of the coil (i.e. penetration depth) can be controlled independently at two different Larmor fr…
▽ More
In this paper we propose, design and test a new dual-nuclei RF-coil inspired by wire metamaterial structures. The coil operates due to resonant excitation of hybridized eigenmodes in multimode flat periodic structures comprising several coupled thin metal strips. It was shown that the field distribution of the coil (i.e. penetration depth) can be controlled independently at two different Larmor frequencies by selecting a proper eigenmode in each of two mutually orthogonal periodic structures. The proposed coil requires no lumped capacitors for tuning and matching. In order to demonstrate the performance of the new design, an experimental preclinical coil for $^{19}$F/$^{1}$H imaging of small animals at 7.05T was engineered and tested on a homogeneous liquid phantom and in-vivo. The presented results demonstrate that the coil was well tuned and matched simultaneously at two Larmor frequencies and capable of image acquisition with both the nuclei reaching large homogeneity area along with a sufficient signal-to-noise ratio. In an in-vivo experiment it has been shown that without retuning the setup it was possible to obtain anatomical $^{1}$H images of a mouse under anesthesia consecutively with $^{19}$F images of a tiny tube filled with a fluorine-containing liquid and attached to the body of the mouse.
△ Less
Submitted 14 September, 2017;
originally announced September 2017.
-
Polarizability Expressions for Predicting Resonances in Plasmonic and Mie Scatterers
Authors:
Rémi Colom,
Alexis Devilez,
Stefan Enoch,
Brian Stout,
Nicolas Bonod
Abstract:
Polarizability expressions are commonly used in optics and photonics to model the light scattering by small particles. Models based on Taylor series of the scattering coefficients of the particles fail to predict the morphologic resonances hosted by dielectric particles. Here, we propose to use the factorization of the special functions appearing in the expression of the Mie scattering coefficient…
▽ More
Polarizability expressions are commonly used in optics and photonics to model the light scattering by small particles. Models based on Taylor series of the scattering coefficients of the particles fail to predict the morphologic resonances hosted by dielectric particles. Here, we propose to use the factorization of the special functions appearing in the expression of the Mie scattering coefficients to derive point-like models. These models can be applied to reproduce both Mie resonances of dielectric particles and plasmonic resonances of metallic particles. They provide simple but robust tools to predict accurately the electric and magnetic Mie resonances in dielectric particles.
△ Less
Submitted 12 May, 2017;
originally announced May 2017.
-
Dykes for filtering ocean waves using c-shaped vertical cylinders
Authors:
Guillaume Dupont,
Fabien Remy,
Olivier Kimmoun,
Bernard Molin,
Sebastien Guenneau,
Stefan Enoch
Abstract:
The present study investigates a way to design dykes which can filter the wavelengths of ocean surface waves. This offers the possibility to achieve a structure that can attenuate waves associated with storm swell, without affecting coastline in other conditions. Our approach is based on low frequency resonances in metamaterials combined with Bragg frequencies for which waves cannot propagate in p…
▽ More
The present study investigates a way to design dykes which can filter the wavelengths of ocean surface waves. This offers the possibility to achieve a structure that can attenuate waves associated with storm swell, without affecting coastline in other conditions. Our approach is based on low frequency resonances in metamaterials combined with Bragg frequencies for which waves cannot propagate in periodic lattices.
△ Less
Submitted 5 May, 2017;
originally announced May 2017.
-
Clamped seismic metamaterials: Ultra-low broad frequency stop-bands
Authors:
Y. Achaoui,
T. Antonakakis,
S. Brule,
R. V. Craster,
S. Enoch,
S. Guenneau
Abstract:
The regularity of earthquakes, their destructive power, and the nuisance of ground vibration in urban environments, all motivate designs of defence structures to lessen the impact of seismic and ground vibration waves on buildings. Low frequency waves, in the range $1$ to $10$ Hz for earthquakes and up to a few tens of Hz for vibrations generated by human activities, cause a large amount of damage…
▽ More
The regularity of earthquakes, their destructive power, and the nuisance of ground vibration in urban environments, all motivate designs of defence structures to lessen the impact of seismic and ground vibration waves on buildings. Low frequency waves, in the range $1$ to $10$ Hz for earthquakes and up to a few tens of Hz for vibrations generated by human activities, cause a large amount of damage, or inconvenience, depending on the geological conditions they can travel considerable distances and may match the resonant fundamental frequency of buildings. The ultimate aim of any seismic metamaterial, or any other seismic shield, is to protect over this entire range of frequencies, the long wavelengths involved, and low frequency, have meant this has been unachievable to date.
Elastic flexural waves, applicable in the mechanical vibrations of thin elastic plates, can be designed to have a broad zero-frequency stop-band using a periodic array of very small clamped circles. Inspired by this experimental and theoretical observation, all be it in a situation far removed from seismic waves, we demonstrate that it is possible to achieve elastic surface (Rayleigh) and body (pressure P and shear S) wave reflectors at very large wavelengths in structured soils modelled as a fully elastic layer periodically clamped to bedrock.
We identify zero frequency stop-bands that only exist in the limit of columns of concrete clamped at their base to the bedrock. In a realistic configuration of a sedimentary basin 15 meters deep we observe a zero frequency stop-band covering a broad frequency range of $0$ to $30$ Hz.
△ Less
Submitted 21 January, 2017;
originally announced January 2017.
-
Bio-inspired seismic metamaterials: Time domain simulations in transformed crystals
Authors:
Ronald Aznavourian,
Tania Puvirajesinghe,
Stephane Brule,
Stefan Enoch,
Sebastien Guenneau
Abstract:
We introduce the concept of transformation crystallography which consists of the application of geometric transforms to periodic structures. We consider motifs with three-fold, four-fold and six-fold symmetries according to the crystallographic restriction theorem. Furthermore, we define motifs with five-fold symmetry such as quasi-crystals generated by a cut-and-projection method. We analyze elas…
▽ More
We introduce the concept of transformation crystallography which consists of the application of geometric transforms to periodic structures. We consider motifs with three-fold, four-fold and six-fold symmetries according to the crystallographic restriction theorem. Furthermore, we define motifs with five-fold symmetry such as quasi-crystals generated by a cut-and-projection method. We analyze elastic wave propagation in the transformed crystals and (Penrose-type) quasi-crystals with the finite difference time domain freeware SimSonic. We consider geometric transforms underpinning the design of seismic cloaks with square, circular, elliptical and peanut shapes in the context of triangular, square and honeycomb crystals. Interestingly, the use of morphing techniques leads to the design of cloaks with interpolated geometries reminiscent of Victor Vasarely's artwork. Employing the case of transformed graphene-like (honeycomb) structures allows one to draw useful analogies between large-scale seismic metamaterials such as soils structured with columns of concrete or grout with soil and nanoscale biochemical metamaterials. We further point out similarities between cloaks for elastodynamic and hydrodynamic waves and cloaks for diffusion (heat or mass) diffusion processes, notably with respect to invisibility and protection. Experimental data extracted from field test analysis of soil structured with boreholes demonstrates the application of bio-inspired seismic metamaterials. We conclude that these novel materials hold strong applications in biophysics and geophysics.
△ Less
Submitted 2 November, 2016;
originally announced November 2016.
-
Control of Rayleigh-like waves in thick plate Willis metamaterials
Authors:
Andre Diatta,
Younes Achaoui,
Stéphane Brûlé,
Stefan Enoch,
Sébastien Guenneau
Abstract:
We explore interactions of elastic waves propagating in plates (with soil parameters) structured with concrete pillars buried in the soil. Pillars are 2 m in diameter, 30 m in depth and the plate is 50 m in thickness. We study the frequency range 5 to 10 Hz, for which Rayleigh wave wavelengths are smaller than the plate thickness. This frequency range is compatible with frequency ranges of particu…
▽ More
We explore interactions of elastic waves propagating in plates (with soil parameters) structured with concrete pillars buried in the soil. Pillars are 2 m in diameter, 30 m in depth and the plate is 50 m in thickness. We study the frequency range 5 to 10 Hz, for which Rayleigh wave wavelengths are smaller than the plate thickness. This frequency range is compatible with frequency ranges of particular interest in earthquake engineering. It is demonstrated in this paper that two seismic cloaks' configurations allow for an unprecedented flow of elastodynamic energy associated with Rayleigh surface waves. The first cloak design is inspired by some approximation of ideal cloaks' parameters within the framework of thin plate theory. The second, more accomplished but more involved, cloak design is deduced from a geometric transform in the full Navier equations that preserves the symmetry of the elasticity tensor but leads to Willis' equations, well approximated by a homogenization procedure, as corroborated by numerical simulations. The two cloaks's designs are strikingly different, and the superior efficiency of the second type of cloak emphasizes the necessity for rigor in transposition of existing cloaks's designs in thin plates to the geophysics setting. Importantly, we focus our attention on geometric transforms applied to thick plates, which is an intermediate case between thin plates and semi-infinite media, not studied previously. Cloaking efficiency (reduction of the disturbance of the wave wavefront and its amplitude behind an obstacle) and protection (reduction of the wave amplitude within the center of the cloak) are studied for ideal and approximated cloaks' parameters. These results represent a preliminary step towards designs of seismic cloaks for surface Rayleigh waves propagating in sedimentary soils structured with concrete pillars.
△ Less
Submitted 29 November, 2016; v1 submitted 24 September, 2016;
originally announced September 2016.
-
Flat lens for seismic waves
Authors:
Stephane Brule,
Stefan Enoch,
Sebastien Guenneau
Abstract:
A prerequisite for achieving seismic invisibility is to demonstrate the ability of civil engineers to control seismic waves with artificially structured soils. We carry out large-scale field tests with a structured soil made of a grid consisting of cylindrical and vertical holes in the ground and a low frequency artificial source (< 10 Hz). This allows the identification of a distribution of energ…
▽ More
A prerequisite for achieving seismic invisibility is to demonstrate the ability of civil engineers to control seismic waves with artificially structured soils. We carry out large-scale field tests with a structured soil made of a grid consisting of cylindrical and vertical holes in the ground and a low frequency artificial source (< 10 Hz). This allows the identification of a distribution of energy inside the grid, which can be interpreted as the consequence of an effective negative refraction index. Such a flat lens reminiscent of what Veselago and Pendry envisioned for light opens avenues in seismic metamaterials to counteract the most devastating components of seismic signals.
△ Less
Submitted 14 February, 2016;
originally announced February 2016.
-
Seismic waves damping with arrays of inertial resonators
Authors:
Younes Achaoui,
Bogdan Ungureanu,
Stefan Enoch,
Stéphane Brûlé,
Sébastien Guenneau
Abstract:
We investigate the elastic stop band properties of a theoretical cubic array of iron spheres connected to a bulk of concrete via iron or rubber ligaments. Each sphere can move freely within a surrounding air cavity, but ligaments couple it to the bulk and further facilitate bending and rotational motions. Associated low frequency local resonances are well predicted by an asymptotic formula. We fin…
▽ More
We investigate the elastic stop band properties of a theoretical cubic array of iron spheres connected to a bulk of concrete via iron or rubber ligaments. Each sphere can move freely within a surrounding air cavity, but ligaments couple it to the bulk and further facilitate bending and rotational motions. Associated low frequency local resonances are well predicted by an asymptotic formula. We find complete stop bands (for all wave-polarizations) in the frequency range $[16,21]$ Hertz (resp. $[6,11]$ Hertz) for $7.4$-meter (resp. $0.74$-meter) diameter iron spheres with a $10$-meter (resp. $1$-meter) center-to-center spacing, when they are connected to concrete via steel (resp. rubber) ligaments. The scattering problem shows that only bending modes are responsible for damping and that rotational modes are totally overwritten by bending modes. Regarding seismic applications, we further consider soil as a bulk medium, in which case the relative bandwidth of the low frequency stop band can be enlarged through ligaments of different sizes that allow for well separated bending and rotational modes. We finally achieve some damping of elastodynamic waves from $8$ to $49$ Hertz (relative stop band of $143$ percent) for iron spheres $0.74$-meter in diameter that are connected to soil with six rubber ligaments of optimized shapes. These results represent a preliminary step in the design of seismic shields placed around, or underneath, the foundations of large civil infrastructures.
△ Less
Submitted 12 January, 2016; v1 submitted 18 December, 2015;
originally announced December 2015.
-
Auxetic-like metamaterials as novel earthquake protections
Authors:
Bogdan Ungureanu,
Younes Achaoui,
Stefan Enoch,
Stéphane Brûlé,
Sébastien Guenneau
Abstract:
We propose that wave propagation through a class of mechanical metamaterials opens unprecedented avenues in seismic wave protection based on spectral properties of auxetic-like metamaterials. The elastic parameters of these metamaterials like the bulk and shear moduli, the mass density, and even the Poisson ratio, can exhibit negative values in elastic stop bands. We show here that the propagation…
▽ More
We propose that wave propagation through a class of mechanical metamaterials opens unprecedented avenues in seismic wave protection based on spectral properties of auxetic-like metamaterials. The elastic parameters of these metamaterials like the bulk and shear moduli, the mass density, and even the Poisson ratio, can exhibit negative values in elastic stop bands. We show here that the propagation of seismic waves with frequencies ranging from 1Hz to 40Hz can be influenced by a decameter scale version of auxetic-like metamaterials buried in the soil, with the combined effects of impedance mismatch, local resonances and Bragg stop bands. More precisely, we numerically examine and illustrate the markedly different behaviors between the propagation of seismic waves through a homogeneous isotropic elastic medium (concrete) and an auxetic-like metamaterial plate consisting of 64 cells (40mx40mx40m), utilized here as a foundation of a building one would like to protect from seismic site effects. This novel class of seismic metamaterials opens band gaps at frequencies compatible with seismic waves when they are designed appropriately, what makes them interesting candidates for seismic isolation structures.
△ Less
Submitted 15 January, 2016; v1 submitted 29 October, 2015;
originally announced October 2015.
-
Time Driven Subwavelength Focusing with Negative Refraction
Authors:
M. Dubois,
E. Bossy,
S. Enoch,
S. Guenneau,
G. Lerosey,
P. Sebbah
Abstract:
Flat lens concept based on negative refraction proposed by Veselago in 1968 has been mostly investigated in monochromatic regime. It was recently recognized that time development of the super-lensing effect discovered in 2000 by Pendry is yet to be assessed and may spring surprises: Time-dependent illumination could improve the spatial resolution of the focusing. We investigate dynamics of flexura…
▽ More
Flat lens concept based on negative refraction proposed by Veselago in 1968 has been mostly investigated in monochromatic regime. It was recently recognized that time development of the super-lensing effect discovered in 2000 by Pendry is yet to be assessed and may spring surprises: Time-dependent illumination could improve the spatial resolution of the focusing. We investigate dynamics of flexural wave focusing by a 45\degre-tilted square lattice of circular holes drilled in a Duraluminium plate. Time-resolved experiments reveal that the focused image shrinks with time below diffraction limit, with a lateral resolution increasing from 0.8 $λ$ to 0.35 $λ$, whereas focusing under harmonic excitation remains diffraction limited. Modal analysis reveals the role in pulse reconstruction of radiating lens resonances, which repeatedly self-synchronize at the focal spot to shape a super-oscillating field.
△ Less
Submitted 2 March, 2014; v1 submitted 12 March, 2013;
originally announced March 2013.
-
Seismic metamaterial: how to shake friends and influence waves?
Authors:
Stéphane Brûlé,
Emmanuel Javelaud,
Stefan Enoch,
Sébastien Guenneau
Abstract:
Materials engineered at the micro- and nano-meter scale have had a tremendous and lasting impact in photonics and phononics, with applications ranging from periodic structures disallowing light and sound propagation at stop band frequencies, to subwavelength focussing and cloaking with metamaterials. Here, we present the description of a seismic test held on a soil structured at the meter scale us…
▽ More
Materials engineered at the micro- and nano-meter scale have had a tremendous and lasting impact in photonics and phononics, with applications ranging from periodic structures disallowing light and sound propagation at stop band frequencies, to subwavelength focussing and cloaking with metamaterials. Here, we present the description of a seismic test held on a soil structured at the meter scale using vibrocompaction probes. The most simplistic way to interact with a seismic wave is to modify the global properties of the medium, acting on the soil density and then on the wave velocity. The main concept is then to reduce the amplification of seismic waves at the free surface, called site effects in earthquake engineering. However, an alternative way to counteract the seismic signal is by modifying the distribution of seismic energy thanks to a metamaterial made of a grid of vertical, cylindrical and empty inclusions bored in the initial soil, in agreement with numerical simulations using an approximate plate model.
△ Less
Submitted 31 January, 2013;
originally announced January 2013.
-
Invisibility carpet in a channel with a structured fluid
Authors:
Guillaume Dupont,
Sebastien Guenneau,
Stefan Enoch
Abstract:
We first note it is possible to construct two linear operators defined on two different domains, yet sharing the same spectrum using a geometric transform. However, one of these two operators will necessarily have spatially varying, matrix valued, coefficients. This mathematical property can be used in the design of metamaterials whereby two different domains behave in the same electromagnetic, ac…
▽ More
We first note it is possible to construct two linear operators defined on two different domains, yet sharing the same spectrum using a geometric transform. However, one of these two operators will necessarily have spatially varying, matrix valued, coefficients. This mathematical property can be used in the design of metamaterials whereby two different domains behave in the same electromagnetic, acoustic, or hydrodynamic way (mimetism). To illustrate this property, we describe a feasible invisibility carpet for linear surface liquid waves in a channel. This structured metamaterial bends surface waves over a finite interval of Hertz frequencies.
△ Less
Submitted 30 September, 2011;
originally announced September 2011.
-
Plasmonic interaction of light with negative index and gold nano-checkerboards
Authors:
Sangeeta Chakrabarti,
S. Anantha Ramakrishna,
Neeraj Shukla,
Fanny Guenneau,
Muamer Kadic,
Sebastien Guenneau,
Stefan Enoch
Abstract:
Negative refractive index materials (NRIM) make possible unique effects such as a convergent at lens due to the reversed Snell-Descartes laws of refraction. NRIM are also known to be able to support a host of surface plasmon states for both polarizations of light which are responsible for the sub-wavelength image resolution achieved by a slab of NRIM. A generalized lens theorem provides us with a…
▽ More
Negative refractive index materials (NRIM) make possible unique effects such as a convergent at lens due to the reversed Snell-Descartes laws of refraction. NRIM are also known to be able to support a host of surface plasmon states for both polarizations of light which are responsible for the sub-wavelength image resolution achieved by a slab of NRIM. A generalized lens theorem provides us with a class of spatially varying slab lenses satisfying the prerequisite symmetries to fold the optical space onto itself. This theorem can be derived using powerful tools of transformational optics. A paradigm of such complementary media are checkerboards consisting of alternating cells of positive and negative refractive index that represent a very singular situation in which the local density of modes at the corners are enormously enhanced. We have considered several theoretical and numerical aspects of such structured films including a finite slabs of multi-scale checkerboards of NRIM satisfying the generalized lens theorem which are host of strongly enhanced electromagnetic feld. Such checkerboards can be mapped using transformational optics onto three-dimensional corner lenses consisting of semi-infinite heterogeneous anisotropic regions of space satisfying the generalized lens theorem. It is also possible to design three-dimensional checkerboards of complementary media, the only restriction being that corresponding unfolded structures in the plane are constrained by the four color theorem. Some of these meta-surfaces in the plane display thin bridges of complementary media, and this further enhances their plasmonic response. Since plasmonic metals mimic the behaviour of NRIM at small length scales, opaque gold films structured at sub-micron scales in a checkerboard fashion were fabricated using focussed-ion-beam technologies and their scattering spectra measured.
△ Less
Submitted 18 February, 2011;
originally announced February 2011.
-
Invisible waveguides on metal plates for plasmonic analogues of electromagnetic wormholes
Authors:
Muamer Kadic,
Guillaume Dupont,
Sebastien Guenneau,
Stefan Enoch
Abstract:
We introduce two types of toroidal metamaterials which are invisible to surface plasmon polaritons (SPPs) propagating on a metal surface. The former is a toroidal handlebody bridging remote holes on the metal surface: It works as a kind of plasmonic counterpart of electromagnetic wormholes. The latter is a toroidal ring lying on the metal surface: This bridges two disconnected metal surfaces i.e.…
▽ More
We introduce two types of toroidal metamaterials which are invisible to surface plasmon polaritons (SPPs) propagating on a metal surface. The former is a toroidal handlebody bridging remote holes on the metal surface: It works as a kind of plasmonic counterpart of electromagnetic wormholes. The latter is a toroidal ring lying on the metal surface: This bridges two disconnected metal surfaces i.e. It connects a thin metal cylinder to a flat metal surface with a hole. Full-wave numerical simulations demonstrate that an electromagnetic field propagating inside these metamaterials does not disturb the propagation of SPPs at the metal surface. A multilayered design of these devices is proposed, based on effective medium theory for a set of reduced parameters: The former plasmonic analogue of electromagnetic wormhole requires homogeneous isotropic magnetic layers, while the latter merely requires dielectric layers.
△ Less
Submitted 2 September, 2014; v1 submitted 11 February, 2011;
originally announced February 2011.
-
Curved trajectories on transformed metal surfaces: Luneburg lens, beam-splitter, invisibility carpet and black hole for surface plasmon polaritons
Authors:
Kadic Muamer,
Dupont Guillaume,
Tieh-Ming Chang,
Sebastien Guenneau,
Stefan Enoch
Abstract:
Transformational optics are shown to markedly enhance the control of the electromagnetic wave trajectories within metamaterials with unconventional functionalities such as a beam splitter, a toroidal carpet, a Luneburg lens and a black hole, all of which are specially designed for surface plasmon polaritons propagating on a metal plate
Transformational optics are shown to markedly enhance the control of the electromagnetic wave trajectories within metamaterials with unconventional functionalities such as a beam splitter, a toroidal carpet, a Luneburg lens and a black hole, all of which are specially designed for surface plasmon polaritons propagating on a metal plate
△ Less
Submitted 4 February, 2011;
originally announced February 2011.
-
Plasmonic space folding: focussing surface plasmons via negative refraction in complementary media
Authors:
Muamer Kadic,
Sebastien Guenneau,
Stefan Enoch,
S. Anantha Ramakrishna
Abstract:
We extend designs of perfect lenses to the focussing of surface plasmon polaritons (SPPs) propagating at the interface between two anisotropic media of opposite permittivity sign. We identify the role played by the components of anisotropic and heterogeneous tensors of permittivity and permeability, deduced from a coordinate transformation, in the dispersion relation governing propagation of SPPs.…
▽ More
We extend designs of perfect lenses to the focussing of surface plasmon polaritons (SPPs) propagating at the interface between two anisotropic media of opposite permittivity sign. We identify the role played by the components of anisotropic and heterogeneous tensors of permittivity and permeability, deduced from a coordinate transformation, in the dispersion relation governing propagation of SPPs. We illustrate our theory with three-dimensional finite element computations for focussing of SPPs by perfect flat and cylindrical lenses.
△ Less
Submitted 19 November, 2010;
originally announced November 2010.
-
Controlling surface plasmon polaritons in transformed coordinates
Authors:
Muamer Kadic,
Guillaume Dupont,
Sebastien Guenneau,
Stefan Enoch
Abstract:
Transformational optics allow for a markedly enhanced control of the electromagnetic wave trajectories within metamaterials with interesting applications ranging from perfect lenses to invisibility cloaks, carpets, concentrators and rotators. Here, we present a review of curved anisotropic heterogeneous meta-surfaces designed using the tool of transformational plasmonics, in order to achieve a sim…
▽ More
Transformational optics allow for a markedly enhanced control of the electromagnetic wave trajectories within metamaterials with interesting applications ranging from perfect lenses to invisibility cloaks, carpets, concentrators and rotators. Here, we present a review of curved anisotropic heterogeneous meta-surfaces designed using the tool of transformational plasmonics, in order to achieve a similar control for surface plasmon polaritons in cylindrical and conical carpets, as well as cylindrical cloaks, concentrators and rotators of a non-convex cross-section. Finally, we provide an asymptotic form of the geometric potential for surface plasmon polaritons on such surfaces in the limit of small curvature.
△ Less
Submitted 25 October, 2010;
originally announced November 2010.
-
Finite elements modelling of scattering problems for flexural waves in thin plates: Application to elliptic invisibility cloaks, rotators and the mirage effect
Authors:
Mohamed Farhat,
Sebastien Guenneau,
Stefan Enoch
Abstract:
We propose a finite elements algorithm to solve a fourth order partial differential equation governing the propagation of time-harmonic bending waves in thin elastic plates. Specially designed perfectly matched layers are implemented to deal with the infinite extent of the plates. These are deduced from a geometric transform in the biharmonic equation. To numerically illustrate the power of elasto…
▽ More
We propose a finite elements algorithm to solve a fourth order partial differential equation governing the propagation of time-harmonic bending waves in thin elastic plates. Specially designed perfectly matched layers are implemented to deal with the infinite extent of the plates. These are deduced from a geometric transform in the biharmonic equation. To numerically illustrate the power of elastodynamic transformations, we analyse the elastic response of an elliptic invisibility cloak surrounding a clamped obstacle in the presence of a cylindrical excitation i.e. a concentrated point force. Elliptic cloaking for flexural waves involves a density and an orthotropic Young's modulus which depend on the radial and azimuthal positions, as deduced from a coordinates transformation for circular cloaks in the spirit of Pendry et al. [Science {\bf 312}, 1780 (2006)], but with a further stretch of a coordinate axis. We find that a wave radiated by a concentrated point force located a couple of wavelengths away from the cloak is almost unperturbed in magnitude and in phase. However, when the point force lies within the coating, it seems to radiate from a shifted location. Finally, we emphasize the versatility of transformation elastodynamics with the design of an elliptic cloak which rotates the polarization of a flexural wave within its core.
△ Less
Submitted 18 June, 2010;
originally announced June 2010.
-
Electromagnetic analysis of arbitrarily shaped pinched carpets
Authors:
Guillaume Dupont,
Sebastien Guenneau,
Stefan Enoch
Abstract:
We derive the expressions for the anisotropic heterogeneous tensors of permittivity and perme- ability associated with two-dimensional and three-dimensional carpets of an arbitrary shape. In the former case, we map a segment onto smooth curves whereas in the latter case we map a non convex region of the plane onto smooth surfaces. Importantly, these carpets display no singularity of the permeabili…
▽ More
We derive the expressions for the anisotropic heterogeneous tensors of permittivity and perme- ability associated with two-dimensional and three-dimensional carpets of an arbitrary shape. In the former case, we map a segment onto smooth curves whereas in the latter case we map a non convex region of the plane onto smooth surfaces. Importantly, these carpets display no singularity of the permeability and permeability tensor components, and this may lead to some broadband cloaking.
△ Less
Submitted 31 May, 2010;
originally announced May 2010.
-
Non-singular arbitrary cloaks dressing three-dimensional anisotropic obstacles
Authors:
G. Dupont,
S. Guenneau,
S. Enoch
Abstract:
We design three dimensional electromagnetic cloaks, starting from a small region of complex shape instead of a point. We derive the expression of a transformation matrix describing an objet with a surface of revolution and its associated non-singular cloak. We note that while none of the eigenvalues vanish inside the cloak, they suffer a discontinuity on its inner surface. Moreover, all three eige…
▽ More
We design three dimensional electromagnetic cloaks, starting from a small region of complex shape instead of a point. We derive the expression of a transformation matrix describing an objet with a surface of revolution and its associated non-singular cloak. We note that while none of the eigenvalues vanish inside the cloak, they suffer a discontinuity on its inner surface. Moreover, all three eigenvalues are independent upon the radius in the concealed object. The validity of our analytical results is confirmed by finite edge-elements computations showing scattering is much reduced when the object is dressed with the cloak. We note that neither the object nor the cloak are invisible on their own.
△ Less
Submitted 29 April, 2010;
originally announced April 2010.
-
Hidden progress: broadband plasmonic invisibility
Authors:
Jan Renger,
Muamer Kadic,
Guillaume Dupont,
Srdjan S. Aćimović,
Sébastien Guenneau,
Romain Quidant,
Stefan Enoch
Abstract:
The key challenge in current research into electromagnetic cloaking is to achieve invisibility over an extended bandwidth. There has been significant progress towards this using the idea of cloaking by sweeping under the carpet of Li and Pendry, with dielectric structures superposed on a mirror. Here, we show that we can harness surface plasmon polaritons at a metal surface structured with a diele…
▽ More
The key challenge in current research into electromagnetic cloaking is to achieve invisibility over an extended bandwidth. There has been significant progress towards this using the idea of cloaking by sweeping under the carpet of Li and Pendry, with dielectric structures superposed on a mirror. Here, we show that we can harness surface plasmon polaritons at a metal surface structured with a dielectric material to obtain a unique control of their propagation. We exploit this to control plasmonic coupling and demonstrate both theoretically and experimentally cloaking over an unprecedented bandwidth (650-900 nm). Our non-resonant plasmonic metamaterial allows a curved reflector to mimic a flat mirror. Our theoretical predictions are validated by experiments mapping the surface light intensity at the wavelength 800 nm.
△ Less
Submitted 29 March, 2010;
originally announced March 2010.
-
Acoustic cloaking and mirages with flying carpets
Authors:
Andre Diatta,
Guillaume Dupont,
Sebastien Guenneau,
Stefan Enoch
Abstract:
Carpets under consideration here, in the context of pressure acoustic waves propagating in a compressible fluid, do not touch the ground: they levitate in mid-air (or float in mid-water), which leads to approximate cloaking for an object hidden underneath, or touching either sides of a square cylinder on, or over, the ground. The tentlike carpets attached to the sides of a square cylinder illust…
▽ More
Carpets under consideration here, in the context of pressure acoustic waves propagating in a compressible fluid, do not touch the ground: they levitate in mid-air (or float in mid-water), which leads to approximate cloaking for an object hidden underneath, or touching either sides of a square cylinder on, or over, the ground. The tentlike carpets attached to the sides of a square cylinder illustrate how the notion of a carpet on a wall naturally generalizes to sides of other small compact objects. We then extend the concept of flying carpets to circular cylinders. However, instead of reducing its scattering cross-section like in acoustic cloaks, we rather mimic that of another obstacle, say a square rigid cylinder. For instance, show that one can hide any type of defects under such circular carpets, and yet they still scatter waves just like a smaller cylinder on its own. Interestingly, all these carpets are described by non-singular acoustic parameters. To exemplify this important aspect, we propose a multi-layered carpet consisting of isotropic homogeneous fluids with constant bulk modulus and varying density which works over a finite range of wavelengths. We have discussed some applications, with the sonar boats or radars cases as typical examples. For instance, we would like to render a pipeline lying on the bottom of the sea or floating in mid-water undetectable for a boat with a sonar at rest just above it on the surface of the sea. Another possible application would be protecting parabolic antennas.
△ Less
Submitted 21 December, 2009;
originally announced December 2009.
-
Revolution analysis of three-dimensional arbitrary cloaks
Authors:
Guillaume Dupont,
Sébastien Guenneau,
Stefan Enoch,
Guillaume Demésy,
Andre Nicolet,
Frédéric Zolla,
Andre Diatta
Abstract:
We extend the design of radially symmetric three-dimensional invisibility cloaks through transformation optics to cloaks with a surface of revolution. We derive the expression of the transformation matrix and show that one of its eigenvalues vanishes on the inner boundary of the cloaks, while the other two remain strictly positive and bounded. The validity of our approach is confirmed by finite…
▽ More
We extend the design of radially symmetric three-dimensional invisibility cloaks through transformation optics to cloaks with a surface of revolution. We derive the expression of the transformation matrix and show that one of its eigenvalues vanishes on the inner boundary of the cloaks, while the other two remain strictly positive and bounded. The validity of our approach is confirmed by finite edge-elements computations for a non-convex cloak of varying thickness.
△ Less
Submitted 13 November, 2009;
originally announced November 2009.
-
Quasi-TEM modes in rectangular waveguides: a study based on the properties of PMC and hard surfaces
Authors:
Raphaël Pierre,
Gérard Tayeb,
Boris Gralak,
Stefan Enoch
Abstract:
Hard surfaces or magnetic surfaces can be used to propagate quasi-TEM modes inside closed waveguides. The interesting feature of these modes is an almost uniform field distribution inside the waveguide. But the mechanisms governing how these surfaces act, how they can be characterized, and further how the modes propagate are not detailed in the literature. In this paper, we try to answer these q…
▽ More
Hard surfaces or magnetic surfaces can be used to propagate quasi-TEM modes inside closed waveguides. The interesting feature of these modes is an almost uniform field distribution inside the waveguide. But the mechanisms governing how these surfaces act, how they can be characterized, and further how the modes propagate are not detailed in the literature. In this paper, we try to answer these questions. We give some basic rules that govern the propagation of the quasi-TEM modes, and show that many of their characteristics (i.e. their dispersion curves) can be deduced from the simple analysis of the reflection properties of the involved surfaces.
△ Less
Submitted 9 September, 2008;
originally announced September 2008.
-
Finite wavelength cloaking by plasmonic resonance
Authors:
N-A P Nicorovici,
R C McPhedran,
S Enoch,
G Tayeb
Abstract:
We consider cloaking by a coated cylindrical system using plasmonic resonance, and extend previous quasistatic treatments to include the effect of finite wavelength. We show that a probe cylinder can still be cloaked at finite wavelengths, but the cloaking cylinder develops a non-zero scattering cross-section. We show that this latter effect is dominated by a monopole term in the case of an idea…
▽ More
We consider cloaking by a coated cylindrical system using plasmonic resonance, and extend previous quasistatic treatments to include the effect of finite wavelength. We show that a probe cylinder can still be cloaked at finite wavelengths, but the cloaking cylinder develops a non-zero scattering cross-section. We show that this latter effect is dominated by a monopole term in the case of an ideal (lossless) cloaking material, and by a dipole term in the case of a realistic (lossy) material. It can be reduced but not eliminated by variations of geometric or dielectric parameters of the cloaking cylinder.
△ Less
Submitted 9 May, 2008;
originally announced May 2008.
-
Directive Emission from Defect-Free Dodecagonal Photonic Quasicrystals: A Leaky-Wave Characterization
Authors:
Alessandro Micco,
Vincenzo Galdi,
Filippo Capolino,
Alessandro Della Villa,
Vincenzo Pierro,
Stefan Enoch,
Gerard Tayeb
Abstract:
In this paper, we study the radiation from embedded sources in two-dimensional finite-size "photonic-quasicrystal" (PQC) slabs made of dielectric rods arranged according to a 12-fold symmetric aperiodic tiling. The results from our investigation, based on rigorous full-wave simulations, show the possibility of achieving broadside radiation at multiple frequencies, with high-directivity (e.g., 15…
▽ More
In this paper, we study the radiation from embedded sources in two-dimensional finite-size "photonic-quasicrystal" (PQC) slabs made of dielectric rods arranged according to a 12-fold symmetric aperiodic tiling. The results from our investigation, based on rigorous full-wave simulations, show the possibility of achieving broadside radiation at multiple frequencies, with high-directivity (e.g., 15 dB) and low-sidelobes (e.g., -12 dB). We also show that leaky waves are supported by a PQC slab, and that the beamwidth is directly proportional to the leaky-wave attenuation constant, which provides a physically-incisive interpretation of the observed radiation characteristics.
△ Less
Submitted 20 January, 2009; v1 submitted 20 November, 2007;
originally announced November 2007.
