Showing 1–6 of 6 results for author: Effenberg, F

Deuterium retention in pre-lithiated samples and Li-D co-deposits in the DIII-D tokamak

Authors: M. Morbey, F. Effenberg, S. Abe, T. Abrams, A. Bortolon, R. Hood, U. Losada, A. Nagy, J. Ren, D. L. Rudakov, M. J. Simmonds, D. Truong, T. W. Morgan

Abstract: Divertor designs involving liquid lithium have been proposed as an alternative to solid designs and wall conditioning techniques. However, Li affinity with tritium poses a risk for the fuel cycle. This study investigates deuterium retention in pre-lithiated samples and Li-D co-deposits in the DIII-D tokamak, making for the first time a direct comparison between Li-D co-deposits and pre-deposited L… ▽ More Divertor designs involving liquid lithium have been proposed as an alternative to solid designs and wall conditioning techniques. However, Li affinity with tritium poses a risk for the fuel cycle. This study investigates deuterium retention in pre-lithiated samples and Li-D co-deposits in the DIII-D tokamak, making for the first time a direct comparison between Li-D co-deposits and pre-deposited Li films. Samples were exposed to H-mode plasmas in the far scrape-off layer (SOL), and Li powder was injected in-situ with the impurity powder dropper to study the uniformity of Li coatings, and the dependence of fuel retention on Li thickness. The results show that at temperatures below the melting point of lithium, deuterium retention is independent of the thickness of pre-deposited Li layers, with Li-D co-deposits being the primary factor for fuel retention. Both pre-deposited and in-situ deposited Li showed lower erosion than predicted by sputtering yield calculations. These results suggest that fuel retention in fusion reactors using lithium in the divertor will likely be dominated by co-deposits rather than in the divertor itself. If one desires to use Li to achieve flatter temperature profiles, operando Li injection is advantageous over pre-deposited Li films, at least at temperatures below the melting point of lithium. △ Less

Submitted 25 February, 2025; originally announced February 2025.

Integrated modeling of boron powder injection for real-time plasma-facing component conditioning

Authors: Florian Effenberg, Klaus Schmid, Federico Nespoli, Alessandro Bortolon, Yühe Feng, Brian A. Grierson, Jeremy D. Lore, Rajesh Maingi, Dmitry L. Rudakov

Abstract: An integrated modeling framework for investigating the application of solid boron powder injection for real-time surface conditioning of plasma-facing components in tokamak environments is presented. Utilizing the DIII-D impurity powder dropper setup, this study simulates B powder injection scenarios ranging from mg/s to tens of mg/s, corresponding to B flux rates of $10^{20}-10^{21}$ B/s in stand… ▽ More An integrated modeling framework for investigating the application of solid boron powder injection for real-time surface conditioning of plasma-facing components in tokamak environments is presented. Utilizing the DIII-D impurity powder dropper setup, this study simulates B powder injection scenarios ranging from mg/s to tens of mg/s, corresponding to B flux rates of $10^{20}-10^{21}$ B/s in standard L-mode conditions. The comprehensive modeling approach combines EMC3-EIRENE for simulating the D plasma background and DIS for the ablation and transport of the B powder particles. The results show substantial transport of B to the inboard lower divertor, predominantly influenced by the main ion plasma flow. The dependency on powder particle size (5-250 $μ$m) was found to be insignificant for the scenario considered. The effects of erosion and redeposition were considered to reconcile the discrepancies with experimental observations, which saw substantial deposition on the outer divertor PFCs. For this purpose, the WallDYN3D code was updated to include B sources within the plasma domain and integrated into the modeling framework. The mixed-material migration modeling shows evolving B deposition patterns, suggesting the formation of mixed B-C layers or predominantly B coverage depending on the powder mass flow rate. While the modeling outcomes at lower B injection rates tend to align with experimental observations, the prediction of near-pure B layers at higher rates has yet to be experimentally verified in the C environment of the DIII-D tokamak. The extensive reach of B layers found in the modeling suggests the need for modeling that encompasses the entire wall geometry for more accurate experimental correlations. This integrated approach sets a precedent for analyzing and applying real-time in-situ boron coating techniques in advanced tokamak scenarios, potentially extendable to ITER. △ Less

Submitted 6 December, 2024; v1 submitted 30 June, 2024; originally announced July 2024.

Journal ref: Nuclear Materials and Energy (2024)

In-situ coating of silicon-rich films on tokamak plasma-facing components with real-time Si material injection

Authors: Florian Effenberg, Shota Abe, Gregory Sinclair, Tyler Abrams, Alessandro Bortolon, William R. Wampler, Florian M. Laggner, Dmitry L. Rudakov, Igor Bykov, Charles J. Lasnier, David Mauzey, Alexander Nagy, Raffi Nazikian, Filippo Scotti, Huiqian Wang, Robert S. Wilcox, the DIII-D Team

Abstract: Experiments have been conducted in the DIII-D tokamak to explore the in-situ growth of silicon-rich layers as a potential technique for real-time replenishment of surface coatings on plasma-facing components (PFCs) during steady-state long-pulse reactor operation. Silicon (Si) pellets of 1 mm diameter were injected into low- and high-confinement (L-mode and H-mode) plasma discharges with densities… ▽ More Experiments have been conducted in the DIII-D tokamak to explore the in-situ growth of silicon-rich layers as a potential technique for real-time replenishment of surface coatings on plasma-facing components (PFCs) during steady-state long-pulse reactor operation. Silicon (Si) pellets of 1 mm diameter were injected into low- and high-confinement (L-mode and H-mode) plasma discharges with densities ranging from $3.9-7.5\times10^{19}$ m$^{-3}$ and input powers ranging from $5.5-9$ MW. The small Si pellets were delivered with the impurity granule injector (IGI) at frequencies ranging from 4-16 Hz corresponding to mass flow rates of $5-19$ mg/s ($1-4.2\times10^{20}$ Si/s) at cumulative amounts of up to 34 mg of Si per five-second discharge. Graphite samples were exposed to the scrape-off layer and private flux region plasmas through the divertor material evaluation system (DiMES) to evaluate the Si deposition on the divertor targets. The Si II emission at the sample correlates with silicon injection and suggests net surface Si-deposition in measurable amounts. Post-mortem analysis showed Si-rich coatings containing silicon oxides, of which SiO$_2$ is the dominant component. No evidence of SiC was found, which is attributed to low divertor surface temperatures. The in-situ and ex-situ analysis found that Si-rich coatings of at least $0.4-1.2$ nm thickness have been deposited at $0.4-0.7$ nm/s. The technique is estimated to coat a surface area of at least 0.94 m$^2$ on the outer divertor. These results demonstrate the potential of using real-time material injection to form Si-enriched layers on divertor PFCs during reactor operation. △ Less

Submitted 9 August, 2023; v1 submitted 8 April, 2023; originally announced April 2023.

Comments: Florian Effenberg et al 2023 Nucl. Fusion in press https://doi.org/10.1088/1741-4326/acee98

Journal ref: Nucl. Fusion 63 106004 (2023)

Mitigation of plasma-wall interactions with low-Z powders in DIII-D high confinement plasmas

Authors: Florian Effenberg, Alessandro Bortolon, Livia Casali, Raffi Nazikian, Igor Bykov, Filippo Scotti, Huiqian Q. Wang, Max E. Fenstermacher, Robert Lunsford, Alexander Nagy, Brian A. Grierson, Florian M. Laggner, Rajesh Maingi, the DIII-D Team

Abstract: Experiments with low-Z powder injection in DIII-D high confinement discharges demonstrated increased divertor dissipation and detachment while maintaining good core energy confinement. Lithium (Li), boron (B), and boron nitride (BN) powders were injected in high-confinement mode plasmas ($I_p=$1 MA, $B_t=$2 T, $P_{NB}=$6 MW, $\langle n_e\rangle=3.6-5.0\cdot10^{19}$ m$^{-3}$) into the upper small-a… ▽ More Experiments with low-Z powder injection in DIII-D high confinement discharges demonstrated increased divertor dissipation and detachment while maintaining good core energy confinement. Lithium (Li), boron (B), and boron nitride (BN) powders were injected in high-confinement mode plasmas ($I_p=$1 MA, $B_t=$2 T, $P_{NB}=$6 MW, $\langle n_e\rangle=3.6-5.0\cdot10^{19}$ m$^{-3}$) into the upper small-angle slot (SAS) divertor for 2-s intervals at constant rates of 3-204 mg/s. The multi-species BN powders at a rate of 54 mg/s showed the most substantial increase in divertor neutral compression by more than an order of magnitude and lasting detachment with minor degradation of the stored magnetic energy $W_{mhd}$ by 5%. Rates of 204 mg/s of boron nitride powder further reduce ELM-fluxes on the divertor but also cause a drop in confinement performance by 24% due to the onset of an $n=2$ tearing mode. The application of powders also showed a substantial improvement of wall conditions manifesting in reduced wall fueling source and intrinsic carbon and oxygen content in response to the cumulative injection of non-recycling materials. The results suggest that low-Z powder injection, including mixed element compounds, is a promising new core-edge compatible technique that simultaneously enables divertor detachment and improves wall conditions during high confinement operation. △ Less

Submitted 16 August, 2022; v1 submitted 28 March, 2022; originally announced March 2022.

Comments: F. Effenberg et al 2022 Nucl. Fusion in press https://doi.org/10.1088/1741-4326/ac899d

Journal ref: Nucl. Fusion 62 106015 (2022)

Heat and particle flux detachment with stable plasma conditions in the Wendelstein 7-X stellarator fusion experiment

Authors: Marcin Jakubowski, Ralf König, Oliver Schmitz, Yuhe Feng, Maciej Krychowiak, Matthias Otte, Felix Reimold, Andreas Dinklage, Peter Drewelow, Florian Effenberg, Yu Gao, Holger Niemann, Georg Schlisio, Andrea Pavone, Thomas Sunn Pedersen, Uwe Wenzel, Daihong Zhang, Sebastijan Brezinsek, Sergey Bozhenkov, Kai Jakob Brunner, Daniel Carralero, Ken Hammond, Golo Fuchert, Jens Knauer, Andreas Langenberg , et al. (8 additional authors not shown)

Abstract: Reduction of particle and heat fluxes to plasma facing components is critical to achieve stable conditions for both the plasma and the plasma material interface in magnetic confinement fusion experiments. A stable and reproducible plasma state in which the heat flux is almost completely removed from the material surfaces was discovered recently in the Wendelstein 7-X stellarator experiment. At the… ▽ More Reduction of particle and heat fluxes to plasma facing components is critical to achieve stable conditions for both the plasma and the plasma material interface in magnetic confinement fusion experiments. A stable and reproducible plasma state in which the heat flux is almost completely removed from the material surfaces was discovered recently in the Wendelstein 7-X stellarator experiment. At the same time also particle fluxes are reduced such that material erosion can be mitigated. Sufficient neutral pressure was reached to maintain stable particle exhaust for density control in this plasma state. This regime could be maintained for up to 28 seconds with a minimum feedback control. △ Less

Submitted 10 January, 2020; v1 submitted 7 January, 2020; originally announced January 2020.

Comments: Aimed at Physical Review Letters

First Results from an Event Synchronized -- High Repetition Thomson Scattering System at Wendelstein 7-X

Authors: Hannes Damm, Ekkehard Pasch, Andreas Dinklage, Jürgen Baldzuhn, Sergey Bozhenkov, Kai Jakob Brunner, Florian Effenberg, Golo Fuchert, Joachim Geiger, Jeffrey Harris, Jens Knauer, Petra Kornejew, Thierry Kremeyer, Maciej Krychowiak, Jonathan Schilling, Oliver Schmitz, Evan Scott, Victoria Winters, the Wendelstein 7-X Team

Abstract: The Wendelstein 7-X (W7-X) Thomson scattering (TS) diagnostic was upgraded to transiently achieve kilohertz sampling rates combined with adjustable measuring times. The existing Nd:YAG lasers are employed to repetitively emit "bursts", i.e. multiple laser pulses in a short time interval. Appropriately timing burst in the three available lasers, up to twelve evenly spaced consecutive measurements p… ▽ More The Wendelstein 7-X (W7-X) Thomson scattering (TS) diagnostic was upgraded to transiently achieve kilohertz sampling rates combined with adjustable measuring times. The existing Nd:YAG lasers are employed to repetitively emit "bursts", i.e. multiple laser pulses in a short time interval. Appropriately timing burst in the three available lasers, up to twelve evenly spaced consecutive measurements per burst are possible. The pulse-to-pulse increment within a burst can be tuned from 2 ms to 33.3 ms (500 kHz - 30 Hz). Additionally, an event trigger system was developed to synchronize the burst Thomson scattering measurements to plasma events. Exemplary, a case of fast electron density and temperature evolution after cryogenic H2 pellet injection is presented in order to demonstrate the capabilities of the method. △ Less

Submitted 13 August, 2019; v1 submitted 30 June, 2019; originally announced July 2019.

Comments: 11 pages, 5 figures, To be published as proceeding to the 3rd European Conference on Plasma Diagnostics 2019 in Lisbon in the Proceedings Section of the Journal of Instrumentation (JINST)