-
Phase and sulfur vacancy engineering in cadmium sulfide for boosting hydrogen production from catalytic plastic waste photoconversion
Authors:
Thanh Tam Nguyen,
Jacqueline Hidalgo-Jiménez,
Xavier Sauvage,
Katsuhiko Saito,
Qixin Guo,
Kaveh Edalati
Abstract:
Cadmium sulfide (CdS) is a well-known low-bandgap photocatalyst, but its efficiency is often hindered by rapid photo-generated carrier recombination and a limited number of active catalytic sites. To overcome these challenges, this study introduces an efficient CdS photocatalyst through a novel strategy combining metastable-to-stable phase transformation and sulfur vacancy generation. This strateg…
▽ More
Cadmium sulfide (CdS) is a well-known low-bandgap photocatalyst, but its efficiency is often hindered by rapid photo-generated carrier recombination and a limited number of active catalytic sites. To overcome these challenges, this study introduces an efficient CdS photocatalyst through a novel strategy combining metastable-to-stable phase transformation and sulfur vacancy generation. This strategy integrates hydrothermal treatment and a high-pressure process to create sulfur vacancies, which serve as active catalytic sites, within a thermodynamically stable wurtzite (hexagonal) phase known for its superior photocatalytic properties. The resulting CdS photocatalyst demonstrates exceptional performance in photoreforming for hydrogen production and the conversion of polyethylene terephthalate (PET) plastic into valuable materials. Compared to commercial CdS catalysts, this new material shows a 23-fold increase in both hydrogen production and plastic degradation without the need for co-catalysts. Quenching experiments reveal that holes and hydroxyl radicals play crucial roles in the photoreforming process of this vacancy-rich CdS. First-principles calculations via density functional theory (DFT) indicate that the hexagonal phase possesses a lower bandgap and it exhibits further bandgap narrowing with the introduction of sulfur vacancies. These findings not only present an innovative approach to CdS processing but also highlight the critical role of sulfur vacancies as effective defects for the catalytic photoreforming of microplastics.
△ Less
Submitted 17 January, 2025;
originally announced January 2025.
-
Photoreforming of plastic waste into valuable products and hydrogen using a high-entropy oxynitride with distorted atomic-scale structure
Authors:
Ho Truong Nam Hai,
Thanh Tam Nguyen,
Maiko Nishibori,
Tatsumi Ishihara,
Kaveh Edalati
Abstract:
The persistent existence of plastic waste causes serious problems for the environment, directly and indirectly affecting the health of organisms and humans. Photoreforming is a nature-friendly method that only uses solar energy to convert plastic waste into green hydrogen (H2) and valuable organic products. This study shows that a high-entropy oxynitride (HEON) photocatalyst, synthesized by the ad…
▽ More
The persistent existence of plastic waste causes serious problems for the environment, directly and indirectly affecting the health of organisms and humans. Photoreforming is a nature-friendly method that only uses solar energy to convert plastic waste into green hydrogen (H2) and valuable organic products. This study shows that a high-entropy oxynitride (HEON) photocatalyst, synthesized by the addition of nitrogen to a Ti-Zr-Hf-Nb-Ta-containing high-entropy oxide (HEO), exhibits a higher potential for the production of H2, formic acid and acetic acid from polyethylene terephthalate (PET) photoreforming compared to the relevant HEO. Examination of X-ray absorption near edge structure (XANES) and extended X-ray absorption fine structure (EXAFS) by synchrotron light shows that, in addition to hybridization of 2p orbitals from oxygen and nitrogen, nitrogen atoms distort the structure and completely change the neighborhood of niobium and titanium (a main contributor to the conduction band), expands the atomic bonds of zirconium and tantalum, contracts the atomic bonds of hafnium and decreases the binding energy of titanium, niobium and tantalum. These electronic structure changes lead to a narrower bandgap and diminished electron-hole recombination, enhancing the photoreforming performance. This study introduces HEONs with distorted atomic bond structures as efficient low-bandgap and stable catalysts for transforming plastics into high-value organic chemicals and H2 by photocatalysis.
△ Less
Submitted 24 December, 2024;
originally announced December 2024.
-
Glycine amino acid transformation under impacts by small solar system bodies, simulated via high-pressure torsion method
Authors:
Kaveh Edalati,
Ikuo Taniguchi,
Ricardo Floriano,
Augusto Ducati Luchessi
Abstract:
Impacts by small solar system bodies (meteoroids, asteroids, comets and transitional objects) are characterized by a combination of energy dynamics and chemical modification on both terrestrial and small solar system bodies. In this context, the discovery of glycine amino acid in meteorites and comets has led to a hypothesis that impacts by astronomical bodies could contribute to delivery and poly…
▽ More
Impacts by small solar system bodies (meteoroids, asteroids, comets and transitional objects) are characterized by a combination of energy dynamics and chemical modification on both terrestrial and small solar system bodies. In this context, the discovery of glycine amino acid in meteorites and comets has led to a hypothesis that impacts by astronomical bodies could contribute to delivery and polymerization of amino acids in the early Earth to generate proteins as essential molecules for life. Besides the possibility of abiotic polymerization of glycine, its decomposition by impacts could generate reactive groups to form other essential organic biomolecules. In this study, the high-pressure torsion (HPT) method, as a new platform for simulation of impacts by small solar system bodies, was applied to glycine. In comparison with high-pressure shock experiments, the HPT method simultaneously introduces high pressure and deformation strain. It was found that glycine was not polymerized in the experimental condition assayed, but partially decomposed to ethanol under pressures of 1 and 6 GPa and shear strains of <120 m/m. The detection of ethanol implies the inherent availability of remaining nitrogen-containing groups, which can incorporate to the formation of other organic molecules at the impact site. In addition, this finding highlights a possibility of the origin of ethanol previously detected in comets.
△ Less
Submitted 7 January, 2023;
originally announced January 2023.
-
Visible-light photocatalytic oxygen production on a high-entropy oxide by multiple-heterojunction introduction
Authors:
Parisa Edalati,
Yuta Itagoe,
Hironori Ishihara,
Tatsumi Ishihara,
Hoda Emami,
Makoto Arita,
Masayoshi Fuji,
Kaveh Edalati
Abstract:
High-entropy oxides (HEOs), as multi-component ceramics with high configurational entropy, have been of recent interest due to their attractive properties including photocatalytic activity for H2 production and CO2 conversion. However, the photocatalytic activity of HEOs is still limited to ultraviolet light. In this study, to achieve visible-light-driven photocatalysis, 10 different heterojunctio…
▽ More
High-entropy oxides (HEOs), as multi-component ceramics with high configurational entropy, have been of recent interest due to their attractive properties including photocatalytic activity for H2 production and CO2 conversion. However, the photocatalytic activity of HEOs is still limited to ultraviolet light. In this study, to achieve visible-light-driven photocatalysis, 10 different heterojunctions were simultaneously introduced in the Ti-Zr-Nb-Ta-W-O system. The oxide, which was synthesized by a high-pressure torsion method and oxidation, successfully produced oxygen from water under visible light without co-catalyst addition. The photocatalytic performance was attributed to high visible-light absorption, narrow bandgap, appropriate band structure, presence of multiple heterojunctions and accordingly easy electron-hole separation and slow recombination. These results not only show the potential of high-entropy oxides as new visible-light-active photocatalysts, but also introduce the multiple-heterojunction introduction as a strategy to achieve photocatalysis under visible light.
△ Less
Submitted 7 January, 2023;
originally announced January 2023.
-
Significant CO2 photoreduction on a high-entropy oxynitride
Authors:
Saeid Akrami,
Parisa Edalati,
Yu Shundo,
Motonori Watanabe,
Tatsumi Ishihara,
Masayoshi Fuji,
Kaveh Edalati
Abstract:
CO$_2$ photoreduction on photocatalysts is a nature-friendly solution to decrease the CO$_2$ amount, but the method still has low efficiency because of difficult separation and easy recombination of charge carriers in available catalysts. In this study, a high-entropy oxynitride was introduced as an active photocatalyst for photoreduction. The material had a chemical composition of TiZrNbHfTaO…
▽ More
CO$_2$ photoreduction on photocatalysts is a nature-friendly solution to decrease the CO$_2$ amount, but the method still has low efficiency because of difficult separation and easy recombination of charge carriers in available catalysts. In this study, a high-entropy oxynitride was introduced as an active photocatalyst for photoreduction. The material had a chemical composition of TiZrNbHfTaO$_6$N$_3$ and was produced by a high-pressure torsion method followed by oxidation and nitriding. It showed higher photocatalytic CO$_2$ to CO conversion compared to corresponding high-entropy oxide, benchmark photocatalyst P25 TiO$_2$, and almost all catalysts introduced in the literature. The high activity of this oxynitride, which also showed good chemical stability, was attributed to the large absorbance of light and easy separation of electrons and holes, the low recombination of charge carriers, and the high CO$_2$ adsorption on the surface. These findings introduce high-entropy oxynitrides as promising photocatalysts for CO$_2$ photoreduction.
△ Less
Submitted 13 January, 2023; v1 submitted 7 January, 2023;
originally announced January 2023.
-
Impact of Severe Plastic Deformation on Kinetics and Thermodynamics of Hydrogen Storage in Magnesium and Its Alloys
Authors:
Kaveh Edalati,
Etsuo Akiba,
Walter J. Botta,
Yuri Estrin,
Ricardo Floriano,
Daniel Fruchart,
Thierry Grosdidier,
Zenji Horita,
Jacques Huot,
Hai-Wen Li,
Huai-Jun Lin,
Adam Revesz,
Michael J. Zehetbauer
Abstract:
Magnesium and its alloys are the most investigated materials for solid-state hydrogen storage in the form of metal hydrides, but there are still unresolved problems with the kinetics and thermodynamics of hydrogenation and dehydrogenation of this group of materials. Severe plastic deformation (SPD) methods, such as equal-channel angular pressing (ECAP), high-pressure torsion (HPT), intensive rolli…
▽ More
Magnesium and its alloys are the most investigated materials for solid-state hydrogen storage in the form of metal hydrides, but there are still unresolved problems with the kinetics and thermodynamics of hydrogenation and dehydrogenation of this group of materials. Severe plastic deformation (SPD) methods, such as equal-channel angular pressing (ECAP), high-pressure torsion (HPT), intensive rolling and fast forging, have been widely used to enhance the activation, air resistance, and hydrogenation/dehydrogenation kinetics of Mg-based hydrogen storage materials by introducing ultrafine/nanoscale grains and crystal lattice defects. These severely deformed materials, particularly in the presence of alloying additives or second-phase nanoparticles, can show not only fast hydrogen absorption/desorption kinetics but also good cycling stability. It was shown that some materials that are apparently inert to hydrogen can absorb hydrogen after SPD processing. Moreover, the SPD methods were effectively used for hydrogen binding-energy engineering and synthesizing new magnesium alloys with low thermodynamic stability for reversible low/room-temperature hydrogen storage, such as nanoglasses, high-entropy alloys, and metastable phases including the high-pressure γ-MgH2 polymorph. This article reviews recent advances in the development of Mg-based hydrogen storage materials by SPD processing and discusses their potential in future applications.
△ Less
Submitted 7 January, 2023;
originally announced January 2023.
-
Defective high-entropy oxide photocatalyst with high activity for CO2 conversion
Authors:
Saeid Akrami,
Yasushi Murakami,
Monotori Watanabe,
Tatsumi Ishihara,
Makoto Arita,
Masayoshi Fuji,
Kaveh Edalati
Abstract:
High-entropy oxides (HEOs), as a new family of materials with five or more principal cations, have shown promising properties for various applications. In this work and inspired by inherent defective and strained structure of HEOs, photocatalytic CO2 conversion is examined on a dual-phase TiZrNbHfTaO11 synthesized by a two-step high-pressure torsion mechanical alloying and high-temperature oxidati…
▽ More
High-entropy oxides (HEOs), as a new family of materials with five or more principal cations, have shown promising properties for various applications. In this work and inspired by inherent defective and strained structure of HEOs, photocatalytic CO2 conversion is examined on a dual-phase TiZrNbHfTaO11 synthesized by a two-step high-pressure torsion mechanical alloying and high-temperature oxidation. The HEO, which had various structural defects, showed simultaneous photocatalytic activity for CO2 to CO and H2O to H2 conversion without the addition of a co-catalyst. The photocatalytic activity of this HEO for CO2 conversion was better than conventional photocatalysts such as anatase TiO2 and BiVO4 and similar to P25 TiO2. The high activity of HEO was discussed in terms of lattice defects, lattice strain, light absorbance, band structure, photocurrent generation and charge carrier mobility to activation centers. The current study confirms the high potential of HEOs as a new family of photocatalysts for CO2 conversion.
△ Less
Submitted 7 January, 2023;
originally announced January 2023.
