-
ANSYS HFSS as a new numerical tool to study wave propagation inside anisotropic magnetized plasmas in the Ion Cylotron Range of Frequencies
Authors:
V. Maquet,
R. Ragona,
D. Van Eester,
J. Hillairet,
F. Durodie
Abstract:
The paper demonstrates the possibility to use ANSYS HFSS as a versatile simulating tool for antennas facing inhomogeneous anisotropic magnetized plasmas in the Ion Cyclotron Range of Frequencies (ICRF). The methodology used throughout the paper is first illustrated with a uniform plasma case. We then extend this method to 1D plasma density profiles where we perform a first benchmark against the AN…
▽ More
The paper demonstrates the possibility to use ANSYS HFSS as a versatile simulating tool for antennas facing inhomogeneous anisotropic magnetized plasmas in the Ion Cyclotron Range of Frequencies (ICRF). The methodology used throughout the paper is first illustrated with a uniform plasma case. We then extend this method to 1D plasma density profiles where we perform a first benchmark against the ANTITER II code. The possibility to include more complex phenomena relevant to the ICRF field in future works like the lower hybrid resonance, the edge propagation of slow waves, sheaths and ponderomotive forces is also discussed. We finally present a 3D case for WEST and compare the radiation resistance calculated by the code to the experimental data. The main result of this paper - the implementation of a cold plasma medium in HFSS - is general and we hope it will also benefit to research fields besides controlled fusion.
△ Less
Submitted 25 September, 2023;
originally announced September 2023.
-
Minimization of the edge modes and near fields of a Travelling Wave Array antenna for WEST
Authors:
V. Maquet,
R. Ragona,
F. Durodié,
J. Hillairet
Abstract:
The Travelling Wave Array (TWA) antenna was proposed as a promising alternative for Ion Cyclotron Resonant Heating (ICRH) in future fusion reactors. In this study, the possibility to make a TWA compatible with a tungsten environment like the WEST tokamak is assessed. For this purpose, two aspects of the antenna are investigated: the power spectrum and the near fields excited by the antenna. The se…
▽ More
The Travelling Wave Array (TWA) antenna was proposed as a promising alternative for Ion Cyclotron Resonant Heating (ICRH) in future fusion reactors. In this study, the possibility to make a TWA compatible with a tungsten environment like the WEST tokamak is assessed. For this purpose, two aspects of the antenna are investigated: the power spectrum and the near fields excited by the antenna. The sensitivity of these parameters to load and capacitor layout variations is taken into account while satisfying a proper antenna frequency response. The sensitivity of the power spectrum to frequency variation is also investigated to allow the possibility of fast feedback of the power deposition into the core plasma of WEST. The high resilience of the TWA to these variations is demonstrated and the main parameters of the TWA expected in WEST are compared to the WEST Q2 antenna for the same loading. Possible optimizations of the TWA antenna are discussed. The present study is fully transferable to a fusion reactor like DEMO or ARC.
△ Less
Submitted 25 January, 2023;
originally announced January 2023.
-
Ion cyclotron resonance heating systems upgrade toward high power and CW operations in WEST
Authors:
Julien Hillairet,
Patrick Mollard,
Yanping Zhao,
Jean-Michel Bernard,
Yuntao Song,
Arnaud Argouarch,
Gilles Berger-By,
Nicolas Charabot,
Gen Chen,
Zhaoxi Chen,
Laurent Colas,
Jean-Marc Delaplanche,
Pierre Dumortier,
Frédéric Durodié,
Annika Ekedahl,
Nicolas Fedorczak,
Fabien Ferlay,
Marc Goniche,
Jean-Claude Hatchressian,
Walid Helou,
Jonathan Jacquot,
Emmanuel Joffrin,
Xavier Litaudon,
Gilles Lombard,
Riccardo Maggiora
, et al. (11 additional authors not shown)
Abstract:
The design of the WEST (Tungsten-W Environment in Steady-state Tokamak) Ion cyclotron resonance heating antennas is based on a previously tested conjugate-T Resonant Double Loops prototype equipped with internal vacuum matching capacitors. The design and construction of three new WEST ICRH antennas are being carried out in close collaboration with ASIPP, within the framework of the Associated Labo…
▽ More
The design of the WEST (Tungsten-W Environment in Steady-state Tokamak) Ion cyclotron resonance heating antennas is based on a previously tested conjugate-T Resonant Double Loops prototype equipped with internal vacuum matching capacitors. The design and construction of three new WEST ICRH antennas are being carried out in close collaboration with ASIPP, within the framework of the Associated Laboratory in the fusion field between IRFM and ASIPP. The coupling performance to the plasma and the load-tolerance have been improved, while adding Continuous Wave operation capability by introducing water cooling in the entire antenna. On the generator side, the operation class of the high power tetrodes is changed from AB to B in order to allow high power operation (up to 3 MW per antenna) under higher VSWR (up to 2:1). Reliability of the generators is also improved by increasing the cavity breakdown voltage. The control and data acquisition system is also upgraded in order to resolve and react on fast events, such as ELMs. A new optical arc detection system comes in reinforcement of the V r /V f and SHAD systems.
△ Less
Submitted 4 March, 2016;
originally announced March 2016.
-
R&D activities on RF contacts for the ITER ion cyclotron resonance heating launcher
Authors:
Julien Hillairet,
Arnaud Argouarch,
Rob Bamber,
Bertrand Beaumont,
Jean-Michel Bernard,
Jean-Marc Delaplanche,
Frédéric Durodié,
Philippe Lamalle,
Gilles Lombard,
Keith Nicholls,
Mark Shannon,
Karl Vulliez,
Vincent Cantone,
Jean-Claude Hatchressian,
Philippe Lebourg,
André Martinez,
Patrick Mollard,
David Mouyon,
Marco Pagano,
Jean-Claude Patterlini,
Bernard Soler,
Didier Thouvenin,
Lionel Toulouse,
Jean-Marc Verger,
Terence Vigne
, et al. (1 additional authors not shown)
Abstract:
Embedded RF contacts are integrated within the ITER ICRH launcher to allow assembling, sliding and to lower the thermo-mechanical stress. They have to withstand a peak RF current up to 2.5 kA at 55 MHz in steady-state conditions, in the vacuum environment of themachine.The contacts have to sustain a temperature up to 250{\textdegree}Cduring several days in baking operations and have to be reliable…
▽ More
Embedded RF contacts are integrated within the ITER ICRH launcher to allow assembling, sliding and to lower the thermo-mechanical stress. They have to withstand a peak RF current up to 2.5 kA at 55 MHz in steady-state conditions, in the vacuum environment of themachine.The contacts have to sustain a temperature up to 250{\textdegree}Cduring several days in baking operations and have to be reliable during the whole life of the launcher without degradation. The RF contacts are critical components for the launcher performance and intensive R&D is therefore required, since no RF contactshave so far been qualified at these specifications. In order to test and validate the anticipated RF contacts in operational conditions, CEA has prepared a test platform consisting of a steady-state vacuum pumped RF resonator. In collaboration with ITER Organization and the CYCLE consortium (CYclotronCLuster for Europe), an R&D program has been conducted to develop RF contacts that meet the ITER ICRH launcher specifications. A design proposed by CYCLE consortium, using brazed lamellas supported by a spring to improve thermal exchange efficiency while guaranteeing high contact force, was tested successfully in the T-resonator up to 1.7 kA during 1200 s, but failed for larger current values due to a degradation of the contacts. Details concerning the manufacturing of the brazed contacts on its titanium holder, the RF tests results performed on the resonator and the non-destructive tests analysis of the contacts are given in this paper.
△ Less
Submitted 8 June, 2015;
originally announced June 2015.
-
Design of a mechanically actuated RF grounding system for the ITER ICRH antenna
Authors:
D Hancock,
M Shannon,
B Beaumont,
P Dumortier,
F Durodie,
V Kyrytsya,
F Louche,
R McKinley,
K Nicholls,
the CYCLE Team
Abstract:
In the ITER equatorial ports containing ICRH antennas, parasitic electrical resonances can be excited in the nominal 20 mm clearance gap between the port walls and the plug contained within it. RF calculations have established that these resonances can be effectively mitigated by a series of suitably located electrically conducting contacts between the port and plug. These contacts must allow inst…
▽ More
In the ITER equatorial ports containing ICRH antennas, parasitic electrical resonances can be excited in the nominal 20 mm clearance gap between the port walls and the plug contained within it. RF calculations have established that these resonances can be effectively mitigated by a series of suitably located electrically conducting contacts between the port and plug. These contacts must allow installation and removal of the antenna but must also make reliable electrical contact during antenna operation. In addition, the contacts must be compliant enough to survive deflection of the port during seismic and disruption events without transmitting large forces to the vacuum vessel. The distance to be spanned is subject to significant uncertainty, due to the large manufacturing tolerances of the surrounding components, and this also must be considered during the design process. This paper outlines progress made in the design of the grounding system, as well as detailing a number of concepts which have been investigated and abandoned, leading up to the current reference design. The current reference design is a simple and robust mechanical solution consisting of sprung Copper-plated Inconel flaps which use part of the range of the shimming system included in the antenna design as the actuation mechanism. This paper also details practical testing of a number of aspects of the design, including building and testing a prototype to validate mechanical and thermal analyses.
△ Less
Submitted 20 November, 2013;
originally announced November 2013.
-
Design and operations of load-tolerant external conjugate-T matching system for the A2 ICRH antennas at JET
Authors:
I Monakhov,
M Graham,
T Blackman,
S Dowson,
F Durodie,
P Jacquet,
J Lehmann,
M-L Mayoral,
M P S Nightingale,
C Noble,
H Sheikh,
M Vrancken,
A Walden,
A Whitehurst,
E Wooldridge,
JET-EFDA contributors
Abstract:
A load-tolerant External Conjugate-T (ECT) impedance matching system for two A2 Ion Cyclotron Resonance Heating (ICRH) antennas has been successfully put into operation at JET. The system allows continuous injection of the RF power into plasma in the presence of strong antenna loading perturbations caused by Edge Localized Modes (ELMs). Reliable ECT performance has been demonstrated under a variet…
▽ More
A load-tolerant External Conjugate-T (ECT) impedance matching system for two A2 Ion Cyclotron Resonance Heating (ICRH) antennas has been successfully put into operation at JET. The system allows continuous injection of the RF power into plasma in the presence of strong antenna loading perturbations caused by Edge Localized Modes (ELMs). Reliable ECT performance has been demonstrated under a variety of antenna loading conditions including H-mode plasmas with Radial Outer Gaps (ROG) in the range of 4-14 cm. The high resilience to ELMs predicted during the circuit simulations has been fully confirmed experimentally. Dedicated arc detection techniques and real-time matching algorithms have been developed as a part of the ECT project. The new Advanced Wave Amplitude Comparison System (AWACS) has proven highly efficient in detection of arcs both between and during ELMs. The ECT system has allowed the delivery of up to 4 MW of RF power without trips into plasmas with Type-I ELMs. Together with the 3dB system and the ITER-Like Antenna (ILA), the ECT has brought the total RF power coupled to ELMy plasma to over 8 MW, considerably enhancing JET research capabilities. This paper provides an overview of the key design features of the ECT system and summarizes the main experimental results achieved so far.
△ Less
Submitted 18 September, 2013;
originally announced September 2013.
