-
Dynamic Viscosity of Methane Hydrate Systems from Non-Einsteinian, Plasma-Functionalized Carbon Nanotube Nanofluids
Authors:
Adam McElligott,
André Guerra,
Chong Yang Du,
Alejandro D. Rey,
Jean-Luc Meunier,
Phillip Servio
Abstract:
The viscosity of oxygen-functionalized multi-walled carbon nanotube (O-MWCNT) nanofluids was measured for concentrations from 0.1 to 10 ppm under conditions of 0 to 30 MPag pressures and 0 to 10 C temperatures. The presence of O-MWCNTs did not affect the temperature dependence of viscosity but did reduce the effective viscosity of solution due to cumulative hydrogen bond-disrupting surface effects…
▽ More
The viscosity of oxygen-functionalized multi-walled carbon nanotube (O-MWCNT) nanofluids was measured for concentrations from 0.1 to 10 ppm under conditions of 0 to 30 MPag pressures and 0 to 10 C temperatures. The presence of O-MWCNTs did not affect the temperature dependence of viscosity but did reduce the effective viscosity of solution due to cumulative hydrogen bond-disrupting surface effects, which overcame internal drag forces. O-MWCNTs added a weak pressure dependence to the viscosity of solution because of their ability to align more with the flow direction as pressure increased. In the liquid to hydrate phase transition, the times to reach the maximum viscosity were faster in O-MWCNT systems compared to the pure water baseline. However, the presence of O-MWCNTs limited the conditions at which hydrates formed as increased nanoparticle collisions in those systems inhibited the formation of critical clusters of hydrate nuclei. The times to viscosity values most relevant to technological applications were minimally 28.02 % (200 mPa s) and 21.08 % (500 mPa s) slower than the baseline, both in the 1 ppm system, even though all systems were faster to the final viscosity. This was attributed to O-MWCNT entanglement, which resulted in a hydrate slurry occurring at lower viscosity values.
△ Less
Submitted 28 June, 2023;
originally announced June 2023.
-
Effects of Poly(styrene/pentafluorostyrene-block-vinylpyrrolidone) Amphiphilic Kinetic Hydrate Inhibitors on the Dynamic Viscosity of Methane Hydrate Systems at High-Pressure Driving Forces
Authors:
Chong Yang Du,
André Guerra,
Adam McElligott,
Milan Marić,
Phillip Servio
Abstract:
Reversible addition-fragmentation chain-transfer polymerization with a switchable chain-transfer agent was employed to synthesize amphiphilic block copolymers poly(styrene-b-vinylpyrrolidone) and poly(pentafluorostyrene-b-vinylpyrrolidone) at 10 wt.% hydrophobic content as kinetic hydrate inhibitors for methane hydrates. The dynamic viscosity of methane hydrate slurries was measured in a high-pres…
▽ More
Reversible addition-fragmentation chain-transfer polymerization with a switchable chain-transfer agent was employed to synthesize amphiphilic block copolymers poly(styrene-b-vinylpyrrolidone) and poly(pentafluorostyrene-b-vinylpyrrolidone) at 10 wt.% hydrophobic content as kinetic hydrate inhibitors for methane hydrates. The dynamic viscosity of methane hydrate slurries was measured in a high-pressure rheometer up to 15 MPag. At 700 ppm of additives in aqueous media, the relative time for slurries to grow to 200 mPa s was 2.2-2.4 times longer than water reference values for the block copolymers. In contrast, it was only 1.3 for the poly(vinylpyrrolidone) homopolymer, demonstrating a reduced tendency for hydrate particle adhesion in block copolymer solutions. By increasing the concentration to 7000 ppm, however, the relative time only increased to 2.6-2.7. On the other hand, a block copolymer with 5 wt.% poly(pentafluorostyrene) block at 7000 ppm reached 3.5, which may indicate that the optimal hydrophobic content differs for each amphiphilic polymer and depends on monomer selection. No significant effect of polymer aggregation on hydrate growth was observed for the copolymers used in this study, which had the same hydrophobic percentage and molecular weights between 10,000 and 40,000 g/mol.
△ Less
Submitted 1 April, 2023;
originally announced April 2023.
-
Non-Einsteinian Viscosity Behavior in Plasma-Functionalized Graphene Nanoflake Nanofluids and their Effect on the Dynamic Viscosity of Methane Hydrate Systems
Authors:
Adam McElligott,
André Guerra,
Chong Yang Du,
Alejandro D. Rey,
Jean-Luc Meunier,
Phillip Servio
Abstract:
Water's viscosity dependence on pressure was also not affected by O-GNFs, except at 10 ppm, where the shuttle effect may have increased the presence of hydrophobic methane bubbles in the solution. Under high pressure, the relative viscosity of the system remained non-Einsteinian at all temperatures except 2C. This may have been because the density anomaly of water was shifted to a colder temperatu…
▽ More
Water's viscosity dependence on pressure was also not affected by O-GNFs, except at 10 ppm, where the shuttle effect may have increased the presence of hydrophobic methane bubbles in the solution. Under high pressure, the relative viscosity of the system remained non-Einsteinian at all temperatures except 2C. This may have been because the density anomaly of water was shifted to a colder temperature as the hydrogen bonding network was weaker. The phase transition from liquid to hydrate was identical to that of pure water, indicating that the presence of different stages of growth was not affected by the presence of O-GNF. However, the times to reach a maximum viscosity were faster in O-GNF systems compared to pure water. This said, the hydrate formation limitations inherent to the measurement system were not overcome by the presence of O-GNFs. The times to application-relevant viscosity values were maximized in the 1 ppm system at 49.75 % (200 mPa.s) and 31.93 % (500 mPa.s) faster than the baseline. Therefore, the presence of O-GNFs allowed for shorter times to desired viscosities and at lower driving forces than the baseline, improving the viability of the hydrate technologies to which they can be added.
△ Less
Submitted 23 February, 2023;
originally announced February 2023.
-
Effects of Poly(vinylpyrrolidone) on the Dynamic Viscosity of Methane Hydrate Systems at High-Pressure Driving Forces: Investigation of Concentration, Molecular Weight, and Shear Rate
Authors:
Chong Yang Du,
André Guerra,
Adam McElligott,
Milan Marić,
Alejandro D. Rey,
Phillip Servio
Abstract:
The viscosity of methane hydrate slurries with poly(vinylpyrrolidone) (PVP) at 700 and 7000 ppm by weight, molecular weights of 40,000 (PVP40) and 360,000 (PVP360) Da, and shear rates of 400 and 80 1/s, were measured in a high-pressure rheometer with pressures up to 30 MPag and compared to pure water systems. The additives successfully reduced the formation of high-viscosity slurries, but at low c…
▽ More
The viscosity of methane hydrate slurries with poly(vinylpyrrolidone) (PVP) at 700 and 7000 ppm by weight, molecular weights of 40,000 (PVP40) and 360,000 (PVP360) Da, and shear rates of 400 and 80 1/s, were measured in a high-pressure rheometer with pressures up to 30 MPag and compared to pure water systems. The additives successfully reduced the formation of high-viscosity slurries, but at low concentrations were incapable of delaying hydrate agglomeration at the late growth stage. The average relative time required for PVP40 solutions at 700 ppm to grow to 50 mPa.s was 1.9 times the water reference value, but only 1.2 times to reach 200 mPa.s. Improved inhibition was observed for the higher concentration and higher molecular weight sets, where the relative time to reach 50 mPa.s were 8.2 and 2.6 times the water reference value, respectively. While the additives demonstrated anti-nucleation properties and suppressed crystal growth initially, they accelerated the hydrate clusters agglomeration rate, and potentially weakened the hydrate mechanical properties.
△ Less
Submitted 23 February, 2023;
originally announced February 2023.
