-
Heat and particle flux detachment with stable plasma conditions in the Wendelstein 7-X stellarator fusion experiment
Authors:
Marcin Jakubowski,
Ralf König,
Oliver Schmitz,
Yuhe Feng,
Maciej Krychowiak,
Matthias Otte,
Felix Reimold,
Andreas Dinklage,
Peter Drewelow,
Florian Effenberg,
Yu Gao,
Holger Niemann,
Georg Schlisio,
Andrea Pavone,
Thomas Sunn Pedersen,
Uwe Wenzel,
Daihong Zhang,
Sebastijan Brezinsek,
Sergey Bozhenkov,
Kai Jakob Brunner,
Daniel Carralero,
Ken Hammond,
Golo Fuchert,
Jens Knauer,
Andreas Langenberg
, et al. (8 additional authors not shown)
Abstract:
Reduction of particle and heat fluxes to plasma facing components is critical to achieve stable conditions for both the plasma and the plasma material interface in magnetic confinement fusion experiments. A stable and reproducible plasma state in which the heat flux is almost completely removed from the material surfaces was discovered recently in the Wendelstein 7-X stellarator experiment. At the…
▽ More
Reduction of particle and heat fluxes to plasma facing components is critical to achieve stable conditions for both the plasma and the plasma material interface in magnetic confinement fusion experiments. A stable and reproducible plasma state in which the heat flux is almost completely removed from the material surfaces was discovered recently in the Wendelstein 7-X stellarator experiment. At the same time also particle fluxes are reduced such that material erosion can be mitigated. Sufficient neutral pressure was reached to maintain stable particle exhaust for density control in this plasma state. This regime could be maintained for up to 28 seconds with a minimum feedback control.
△ Less
Submitted 10 January, 2020; v1 submitted 7 January, 2020;
originally announced January 2020.
-
Observation of thermal events on the plasma facing components of Wendelstein 7-X
Authors:
A. Puig Sitjes,
Y. Gao,
M. Jakubowski,
P. Drewelow,
H. Niemann,
A. Ali,
V. Moncada,
F. Pisano,
T. T. Ngo,
B. Cannas,
M. Sleczka,
W7-X Team
Abstract:
Long pulse operation of present and future magnetic fusion devices requires sophisticated methods for protection of plasma facing components from overheating. Typically, thermographic systems are being used to fulfill this task. Steady state operation requires, however, autonomous operation of the system and fully automatic detection of abnormal events. At Wendelstein 7-X (W7-X), a large advanced…
▽ More
Long pulse operation of present and future magnetic fusion devices requires sophisticated methods for protection of plasma facing components from overheating. Typically, thermographic systems are being used to fulfill this task. Steady state operation requires, however, autonomous operation of the system and fully automatic detection of abnormal events. At Wendelstein 7-X (W7-X), a large advanced stellarator, which aims at demonstrating the capabilities of the stellarator line as a future fusion power plant, significant efforts are being undertaken to develop a fully automatic system based on thermographic diagnostics. In October 2018, the first divertor-based experimental campaign has been finished. One of the goals of this operation phase (named OP1.2) was to study the capabilities of the island divertor concept using an uncooled test divertor made of fine-grain graphite tiles. Throughout this campaign, it was possible to test the infrared imaging diagnostic system, which will be used to protect the actively water-cooled plasma facing components (PFCs) during the steady-state operation in the next experimental campaign. An overview of the most relevant thermal events on the PFCs that were detected in OP1.2 using this system are presented. This includes events that limited operation during the campaign, like baffe hot spots and divertor overloads, events that are potentially critical in steady state operation like leading edges, events caused by the ECRH and NBI heating systems and other events which are a common source of false alarms like surface layers. The detected thermal events are now part of an important and extensive image database which will be used to further automate the system by means of computer vision and machine learning techniques in preparation for steady-state operation, when the system must be able to detect dangerous events and protect the machine in real-time.
△ Less
Submitted 9 October, 2019;
originally announced October 2019.
-
Validating the ASCOT modelling of NBI fast ions in Wendelstein 7-X stellarator
Authors:
S. Äkäslompolo,
P. Drewelow,
Y. Gao,
A. Ali,
C. Biedermann,
S. Bozhenkov,
C. P. Dhard,
M. Endler,
J. Fellinger,
O. P. Ford,
B. Geiger,
J. Geiger,
N. den Harderd,
D. Hartmann,
D. Hathiramani,
M. Isobe,
M. Jakubowski,
Y. Kazakov,
C. Killer,
S. Lazerson,
M. Mayerd,
P. McNeely,
D. Naujoks,
T. W. C. Neelis,
J. Kontula
, et al. (15 additional authors not shown)
Abstract:
The first fast ion experiments in Wendelstein 7-X were performed in 2018. They are one of the first steps in demonstrating the optimised fast ion confinement of the stellarator. The fast ions were produced with a neutral beam injection (NBI) system and detected with infrared cameras (IR), a fast ion loss detector (FILD), fast ion charge exchange spectroscopy (FIDA), and post-mortem analysis of pla…
▽ More
The first fast ion experiments in Wendelstein 7-X were performed in 2018. They are one of the first steps in demonstrating the optimised fast ion confinement of the stellarator. The fast ions were produced with a neutral beam injection (NBI) system and detected with infrared cameras (IR), a fast ion loss detector (FILD), fast ion charge exchange spectroscopy (FIDA), and post-mortem analysis of plasma facing components. The fast ion distribution function in the plasma and at the wall is being modelled with the ASCOT suite of codes. They calculate the ionisation of the injected neutrals and the consecutive slowing down process of the fast ions. The primary output of the code is the multidimensional fast ion distribution function within the plasma and the distribution of particle hit locations and velocities on the wall. Synthetic measurements based on ASCOT output are compared to experimental results to assess the validity of the modelling. This contribution presents an overview of the various fast ion measurements in 2018 and the current modelling status. The validation and data-analysis is on-going, but the wall load IR modelling already yield results that match with the experiments.
△ Less
Submitted 10 September, 2019; v1 submitted 18 June, 2019;
originally announced June 2019.
-
Validating fast-ion wall-load IR analysis-methods against W7-X NBI empty-torus experiment
Authors:
S. Äkäslompolo,
P. Drewelow,
Y. Gao,
A. Ali,
O. Asunta,
S. Bozhenkov,
J. Fellinger,
O. P. Ford,
N. den Harder,
D. Hartmann,
M. Jakubowski,
P. McNeely,
H. Niemann,
F. Pisano,
N. Rust,
A. Puig Sitjes,
M. Sleczka,
A. Spanier,
R. C. Wolf,
the W7-X Team
Abstract:
The first neutral beam injection (NBI) experiments in Wendelstein 7-X (W7-X) stellarator were conducted in the summer of 2018. The NBI system is used to heat the magnetically confined plasma by neutralising an accelerated hydrogen ion beam and directing it into the plasma, where the resulting energetic ions release their energy to heat the plasma. The modelling of the NBI fast ion experiments has…
▽ More
The first neutral beam injection (NBI) experiments in Wendelstein 7-X (W7-X) stellarator were conducted in the summer of 2018. The NBI system is used to heat the magnetically confined plasma by neutralising an accelerated hydrogen ion beam and directing it into the plasma, where the resulting energetic ions release their energy to heat the plasma. The modelling of the NBI fast ion experiments has commenced, including estimation of the shine-through and the orbit-losses. The stellarator has a wide-angle infra red (IR) imaging system to monitor the machine plasma facing component surface temperatures. This work validates the NBI model "Beamlet Based NBI (BBNBI)" and the newly written synthetic IR camera model. The validation is accomplished by comparing the measured and the synthetic IR camera measurements of an experiment where the NBI was injected into the vacuum vessel without a plasma. A good qualitative and quantitative match was found. This agreement is further supported by spectroscopic and calibration measurements of the NBI and and IR camera systems.
△ Less
Submitted 20 June, 2019; v1 submitted 6 June, 2019;
originally announced June 2019.
-
Improved Confinement in JET High {beta} Plasmas with an ITER-Like Wall
Authors:
C. D. Challis,
J. Garcia,
M. Beurskens,
P. Buratti,
E. Delabie,
P. Drewelow,
L. Frassinetti,
C. Giroud,
N. Hawkes,
J. Hobirk,
E. Joffrin,
D. Keeling,
D. B. King,
C. F. Maggi,
J. Mailloux,
C. Marchetto,
D. McDonald,
I. Nunes,
G. Pucella,
S. Saarelma,
J. Simpson
Abstract:
The replacement of the JET carbon wall (C-wall) by a Be/W ITER-like wall (ILW) has affected the plasma energy confinement. To investigate this, experiments have been performed with both the C-wall and ILW to vary the heating power over a wide range for plasmas with different shapes.
The replacement of the JET carbon wall (C-wall) by a Be/W ITER-like wall (ILW) has affected the plasma energy confinement. To investigate this, experiments have been performed with both the C-wall and ILW to vary the heating power over a wide range for plasmas with different shapes.
△ Less
Submitted 16 January, 2015;
originally announced January 2015.
