Showing 1–23 of 23 results for author: Drazer, G

Three-dimensional gravity-driven deterministic lateral displacement

Authors: Siqi Du, German Drazer

Abstract: We present a simple solution to enhance the separation ability of deterministic lateral displacement (DLD) systems by expanding the two-dimensional nature of these devices and driving the particles into size-dependent, fully three-dimensional trajectories. Specifically, we drive the particles through an array of long cylindrical posts, such that they not only move in the plane perpendicular to the… ▽ More We present a simple solution to enhance the separation ability of deterministic lateral displacement (DLD) systems by expanding the two-dimensional nature of these devices and driving the particles into size-dependent, fully three-dimensional trajectories. Specifically, we drive the particles through an array of long cylindrical posts, such that they not only move in the plane perpendicular to the posts as in traditional two-dimensional DLD systems (in-plane motion), but also along the axial direction of the solid posts (out-of-plane motion). We show that the (projected) in-plane motion of the particles is completely analogous to that observed in 2D-DLD systems. In fact, a theoretical model originally developed for force-driven, two-dimensional DLD systems accurately describes the experimental results. More importantly, we analyze the particles out-of-plane motion and observe that, for certain orientations of the driving force, significant differences in the out-of-plane displacement depending on particle size. Therefore, taking advantage of both the in-plane and out-of-plane motion of the particles, it is possible to achieve the simultaneous fractionation of a polydisperse suspension into multiple streams. △ Less

Submitted 25 April, 2016; originally announced April 2016.

Centrifugal deterministic lateral displacement separation system

Authors: Mingliang Jiang, Aaron D. Mazzeo, German Drazer

Abstract: This work investigates the migration of spherical particles of different sizes in a centrifuge-driven deterministic lateral displacement (c-DLD) device. Specifically, we use a scaled-up model to study the motion of suspended particles through a square array of cylindrical posts under the action of centrifugation. Experiments show that separation of particles by size is possible depending on the or… ▽ More This work investigates the migration of spherical particles of different sizes in a centrifuge-driven deterministic lateral displacement (c-DLD) device. Specifically, we use a scaled-up model to study the motion of suspended particles through a square array of cylindrical posts under the action of centrifugation. Experiments show that separation of particles by size is possible depending on the orientation of the driving acceleration with respect to the array of posts (forcing angle). We focus on the fractionation of binary suspensions and measure the separation resolution at the outlet of the device for different forcing angles. We found excellent resolution at intermediate forcing angles, when large particles are locked to move at small migration angles but smaller particles follow the forcing angle more closely. Finally, we show that reducing the initial concentration (number) of particles, approaching the dilute limit of single particles, leads to increased resolution in the separation. △ Less

Submitted 21 July, 2015; originally announced July 2015.

Journal ref: Microfluidics and Nanofluidics, 20:17 (2016)

Deterministic separation of suspended particles in a reconfigurable obstacle array

Authors: Siqi Du, German Drazer

Abstract: We use a macromodel of a flow-driven deterministic lateral displacement (DLD) microfluidic system to investigate conditions leading to size-separation of suspended particles. This model system can be easily reconfigured to establish an arbitrary orientation between the average flow field and the array of obstacles comprising the stationary phase (forcing angle). We also investigate the effect of o… ▽ More We use a macromodel of a flow-driven deterministic lateral displacement (DLD) microfluidic system to investigate conditions leading to size-separation of suspended particles. This model system can be easily reconfigured to establish an arbitrary orientation between the average flow field and the array of obstacles comprising the stationary phase (forcing angle). We also investigate the effect of obstacle size using two arrays with different obstacles but same surface-to-surface distance between them. In all cases, we observe the presence of a locked mode at small forcing angles, in which particles move along a principal direction in the lattice until a locked-to-zigzag transition takes place when the driving force reaches a critical angle. We show that the transition occurs at increasing angles for larger particles, thus enabling particle separation at specific forcing angles. Moreover, we observe a linear correlation between the critical angle and the size of the particles that could be used in the design of microfluidic systems with a fixed orientation of the flow field. Finally, we present a simple model, based on the presence of irreversible interactions between the suspended particles and the obstacles, which describes the observed dependence of the migration angle on the orientation of the average flow. △ Less

Submitted 2 March, 2015; originally announced March 2015.

Journal ref: Journal of Micromechanics and Microengineering 25, 114002 (2015)

Molecular simulation of translational and rotational diffusion of Janus nanoparticles at liquid interfaces

Authors: Hossein Rezvantalab, German Drazer, Shahab Shojaei-Zadeh

Abstract: We perform molecular dynamics simulations to understand the translational and rotational diffusion of Janus nanoparticles at the interface between two immiscible fluids. Considering spherical particles with different affinity to fluid phases, both their dynamics as well as the fluid structure around them are evaluated as a function of particle size, amphiphilicity, fluid density, and interfacial t… ▽ More We perform molecular dynamics simulations to understand the translational and rotational diffusion of Janus nanoparticles at the interface between two immiscible fluids. Considering spherical particles with different affinity to fluid phases, both their dynamics as well as the fluid structure around them are evaluated as a function of particle size, amphiphilicity, fluid density, and interfacial tension. We show that as the particle amphiphilicity increases due to enhanced wetting of each side with its favorite fluid, the rotational thermal motion decreases. Moreover, the in-plane diffusion of nanoparticles at the interface becomes slower for more amphiphilic particles, mainly due to formation of a denser adsorption layer. The particles induce an ordered structure in the surrounding fluid that becomes more pronounced for highly amphiphilic nanoparticles, leading to increased resistance against nanoparticle motion. A similar phenomenon is observed for homogeneous particles diffusing in bulk upon increasing their wettability. Our findings can provide fundamental insight into the dynamics of drugs and protein molecules with anisotropic surface properties at biological interfaces including cell membranes. △ Less

Submitted 11 December, 2014; originally announced December 2014.

Journal ref: J. Chem. Phys. 142, 014701 (2015)

Fractionation by shape in deterministic lateral displacement microfluidic devices

Authors: Mingliang Jiang, Kostyantyn Budzan, German Drazer

Abstract: We investigate the migration of particles of different geometrical shapes and sizes in a scaled-up model of a gravity-driven deterministic lateral displacement (g-DLD) device. Specifically, particles move through a square array of cylindrical posts as they settle under the action of gravity. We performed experiments that cover a broad range of orientations of the driving force (gravity) with respe… ▽ More We investigate the migration of particles of different geometrical shapes and sizes in a scaled-up model of a gravity-driven deterministic lateral displacement (g-DLD) device. Specifically, particles move through a square array of cylindrical posts as they settle under the action of gravity. We performed experiments that cover a broad range of orientations of the driving force (gravity) with respect to the columns (or rows) in the square array of posts. We observe that as the forcing angle increases particles initially locked to move parallel to the columns in the array begin to move across the columns of obstacles and migrate at angles different from zero. We measure the probability that a particle would move across a column of obstacles, and define the critical angle θc as the forcing angle at which this probability is 1/2. We show that critical angle depends both on particle size and shape, thus enabling both size- and shape-based separations. Finally, we show that using the diameter of the inscribed sphere as the characteristic size of the particles the corresponding critical angle becomes independent of particle shape and the relationship between them is linear. This linear and possibly universal behavior of the critical angle as a function of the diameter of the inscribed sphere could provide guidance in the design and optimization of g-DLD devices used for shape-based separation. △ Less

Submitted 1 November, 2014; originally announced November 2014.

Journal ref: Microfluid Nanofluid 19, 427 (2015)

Electrokinetically-driven deterministic lateral displacement for particle separation in microfluidic devices

Authors: Srinivas Hanasoge, Raghavendra Devendra, Javier F. Diez, German Drazer

Abstract: An electrokinetically-driven deterministic lateral displacement (e-DLD) device is proposed for the continuous, two-dimensional fractionation of suspensions in microfluidic platforms. The suspended species are driven through an array of regularly spaced cylindrical posts by applying an electric field across the device. We explore the entire range of orientations of the driving field with respect to… ▽ More An electrokinetically-driven deterministic lateral displacement (e-DLD) device is proposed for the continuous, two-dimensional fractionation of suspensions in microfluidic platforms. The suspended species are driven through an array of regularly spaced cylindrical posts by applying an electric field across the device. We explore the entire range of orientations of the driving field with respect to the array of obstacles and show that, at specific forcing-angles, particles of different size migrate in different directions, thus enabling continuous, two-dimensional separation. We discuss a number of features observed in the kinetics of the particles, including directional locking and sharp transitions between migration angles upon variations in the direction of the force, that are advantageous for high-resolution two-dimensional separation. A simple model based on individual particle-obstacle interactions accurately describes the migration angle of the particles depending on the orientation of the driving field, and can be used to re-configure driving field depending on the composition of the samples. △ Less

Submitted 18 May, 2014; originally announced May 2014.

Journal ref: Microfluid Nanofluid 18, 1195 (2015)

Inertia and scaling in deterministic lateral displacement

Authors: Timothy J. Bowman, German Drazer, Joelle Frechette

Abstract: The ability to separate and analyze chemical species with high resolution, sensitivity, and throughput is central to the development of microfluidics systems. Deterministic lateral displacement (DLD) is a continuous separation method based on the transport of species through an array of obstacles. In the case of force-driven DLD (f-DLD), size-based separation can be modelled effectively using a si… ▽ More The ability to separate and analyze chemical species with high resolution, sensitivity, and throughput is central to the development of microfluidics systems. Deterministic lateral displacement (DLD) is a continuous separation method based on the transport of species through an array of obstacles. In the case of force-driven DLD (f-DLD), size-based separation can be modelled effectively using a simple particle-obstacle collision model. We use a macroscopic model to study f-DLD and demonstrate, via a simple scaling, that the method is indeed predominantly a size-based phenomenon at low Reynolds numbers. More importantly, we demonstrate that inertia effects provide the additional capability to separate same size particles but of different densities and could enhance separation at high throughput conditions. We also show that a direct conversion of macroscopic results to microfluidic settings is possible with a simple scaling based on the size of the obstacles that results in a universal curve. △ Less

Submitted 12 April, 2014; v1 submitted 5 April, 2014; originally announced April 2014.

Journal ref: Biomicrofluidics 7, 064111 (2013)

Trajectory and distribution of suspended non-Brownian particles moving past a fixed spherical or cylindrical obstacle

Authors: Sumedh R. Risbud, German Drazer

Abstract: We investigate the motion of a suspended non-Brownian sphere past a fixed cylindrical or spherical obstacle in the limit of zero Reynolds number for arbitrary particle-obstacle aspect ratios. We consider both a suspended sphere moving in a quiescent fluid under the action of a uniform force as well as a uniform ambient velocity field driving a freely suspended particle. We determine the distributi… ▽ More We investigate the motion of a suspended non-Brownian sphere past a fixed cylindrical or spherical obstacle in the limit of zero Reynolds number for arbitrary particle-obstacle aspect ratios. We consider both a suspended sphere moving in a quiescent fluid under the action of a uniform force as well as a uniform ambient velocity field driving a freely suspended particle. We determine the distribution of particles around a single obstacle and solve for the individual particle trajectories to comment on the transport of dilute suspensions past an array of fixed obstacles. First, we obtain an expression for the probability density function governing the distribution of a dilute suspension of particles around an isolated obstacle, and we show that it is isotropic. We then present an analytical expression -- derived using both Eulerian and Lagrangian approaches -- for the minimum particle-obstacle separation attained during the motion, as a function of the incoming impact parameter, i.e. the initial offset between the line of motion far from the obstacle and the coordinate axis parallel to the driving field. Further, we derive the asymptotic behaviour for small initial offsets and show that the minimum separation decays exponentially. Finally we use this analytical expression to define an effective hydrodynamic surface roughness based on the net lateral displacement experienced by a suspended sphere moving past an obstacle. △ Less

Submitted 5 April, 2014; originally announced April 2014.

Journal ref: J. Fluid Mech. 714, 213 (2013)

One-dimensional linear array of cylindrical posts for size-based deterministic separation of binary suspensions

Authors: Raghavendra Devendra, German Drazer

Abstract: We investigate the motion of suspended particles past a single line of equally spaced cylindrical posts that is slanted with respect to the driving force. We show that such a one-dimensional array of posts can fractionate particles according to their size, with small particles permeating through the line of posts but larger particles being deflected by the steric barrier created by the posts, even… ▽ More We investigate the motion of suspended particles past a single line of equally spaced cylindrical posts that is slanted with respect to the driving force. We show that such a one-dimensional array of posts can fractionate particles according to their size, with small particles permeating through the line of posts but larger particles being deflected by the steric barrier created by the posts, even though the gaps between posts are larger than the particles. We perform characterization experiments driving monodisperse suspensions of particles of different size past the line of posts over the entire range of forcing orientations and present both the permeation probability through the individual gaps between the posts as well as the fraction of permeating particles through the one-dimensional array. In both cases, we observe a sharp transition from deflection to permeation mode that is a function of particle size, thus enabling separation. We then drive binary mixtures at selected orientations of the line of posts and demonstrate high purity and efficiency of separation. △ Less

Submitted 4 April, 2014; originally announced April 2014.

Journal ref: Microfluid Nanofluid 17, 519 (2014)

Vector separation of particles and cells using an array of slanted open cavities

Authors: Jorge A. Bernate, Chengxun Liu, Liesbet Lagae, Konstantinos Konstantopoulo, German Drazer

Abstract: We present a microfluidic platform for the continuous separation of suspended particles based on their size and settling velocity. The separation method takes advantage of the flow field in the vicinity and inside a parallel array of slanted open cavities. These cavities induce flow along them, which deflects the suspended particles to a different degree depending on the extent to which they penet… ▽ More We present a microfluidic platform for the continuous separation of suspended particles based on their size and settling velocity. The separation method takes advantage of the flow field in the vicinity and inside a parallel array of slanted open cavities. These cavities induce flow along them, which deflects the suspended particles to a different degree depending on the extent to which they penetrate into the cavities. The cumulative deflection in the periodic array ultimately leads to vector chromatography, with the different species in the sample moving in different directions. We demonstrate density and size based separation over a range of flow rates by separating polystyrene and silica particles and show that purities nearing 100% can be achieved for multicomponent mixtures. We also demonstrate the potential of the platform to separate biological cells by fractionating different blood components. We discuss the presence of two regimes, which can be distinguished depending on the ratio between the settling velocity and the velocity of the particles across the open cavities. The proposed platform could also integrate additional separative force fields in the direction normal to the plane of the cavities to fractionate specific mixtures based on the distinguishing properties of the component species. △ Less

Submitted 4 April, 2014; originally announced April 2014.

Journal ref: Lab Chip 13, 1086 (2013)

Mechanism governing separation in microfluidic pinched flow fractionation devices

Authors: Sumedh R. Risbud, German Drazer

Abstract: We present a computational investigation of the mechanism governing size-based particle separation in microfluidic pinched flow fractionation. We study the behavior of particles moving through a pinching gap (i.e., a constriction in the aperture of a channel) in the Stokes regime as a function of particle size. The constriction aperture is created by a plane wall and spherical obstacle, and emulat… ▽ More We present a computational investigation of the mechanism governing size-based particle separation in microfluidic pinched flow fractionation. We study the behavior of particles moving through a pinching gap (i.e., a constriction in the aperture of a channel) in the Stokes regime as a function of particle size. The constriction aperture is created by a plane wall and spherical obstacle, and emulates the pinching segment in pinched flow fractionation devices. The simulation results show that the distance of closest approach between the particle and obstacle surfaces (along a trajectory) decreases with increasing particle size. We then use the distance of closest approach to investigate the effect of short-range repulsive non-hydrodynamic interactions (e.g., solid-solid contact). We define a critical trajectory as the one in which the minimum particle-obstacle separation is equal to the range of the non-hydrodynamic interactions. The results further show that the initial offset of the critical trajectory (defined as the critical offset) increases with particle size. We interpret the variation of the critical offset with particle size as the basis for size-based microfluidic separation in pinched flow fractionation. We also compare the effect of different driving fields on the particle trajectories; we simulate a constant force driving the particles in a quiescent fluid as well as a freely suspended particles in a pressure-driven flow. We observe that the particles driven by a constant force approach closer to the obstacle than those suspended in a flow (for the same initial offset). On the other hand, the increment in the critical offset (as a function of particle size) is larger in the pressure-driven case than in the force-driven case. Thus, pressure-driven particle separation using pinched flow fractionation would prove more effective than its force-driven counterpart. △ Less

Submitted 4 April, 2014; originally announced April 2014.

Journal ref: Microfluid Nanofluid 17, 1003 (2014)

Directional locking in deterministic lateral displacement microfluidic separation systems

Authors: Sumedh R. Risbud, German Drazer

Abstract: We analyze the trajectory of suspended spherical particles moving through a square array of obstacles, in the deterministic limit and at zero Reynolds number. We show that, in the dilute approximation of widely separated obstacles, the average motion of the particles is equivalent to the trajectory followed by a point particle moving through an array of obstacles with an effective radius. The effe… ▽ More We analyze the trajectory of suspended spherical particles moving through a square array of obstacles, in the deterministic limit and at zero Reynolds number. We show that, in the dilute approximation of widely separated obstacles, the average motion of the particles is equivalent to the trajectory followed by a point particle moving through an array of obstacles with an effective radius. The effective radius accounts for the hydrodynamic as well as short-range repulsive non-hydrodynamic interactions between the suspended particles and the obstacles and is equal to the critical offset at which particle trajectories become irreversible. Using this equivalent system we demonstrate the presence of directional locking in the trajectory of the particles and derive an inequality that accurately describes the Devil's staircase type of structure observed in the migration angle as a function of the forcing direction. Finally, we use these results to determine the optimum resolution in the fractionation of binary mixtures using deterministic lateral displacement separation microfluidic systems. △ Less

Submitted 4 April, 2014; originally announced April 2014.

Journal ref: Phys. Rev. E 90, 012302 (2014)

Analysis of the trajectory of a sphere moving through a geometric constriction

Authors: Sumedh R. Risbud, Mingxiang Luo, Joelle Frechette, German Drazer

Abstract: We present a numerical study of the effect that fluid and particle inertia have on the motion of suspended spherical particles through a geometric constriction to understand analogous microfluidic settings, such as pinched flow fractionation devices. The particles are driven by a constant force in a quiescent fluid, and the constriction (the pinching gap) corresponds to the space between a plane w… ▽ More We present a numerical study of the effect that fluid and particle inertia have on the motion of suspended spherical particles through a geometric constriction to understand analogous microfluidic settings, such as pinched flow fractionation devices. The particles are driven by a constant force in a quiescent fluid, and the constriction (the pinching gap) corresponds to the space between a plane wall and a second, fixed sphere of the same size (the obstacle). The results show that, due to inertia and/or the presence of a geometric constriction the particles attain smaller separations to the obstacle. We then relate the minimum surface-to-surface separation to the effect that short-range, repulsive non-hydrodynamic interactions (such as solid-solid contact due to surface roughness, electrostatic double layer repulsion, etc.) would have on the particle trajectories. In particular, using a simple hard-core repulsive potential model for such interactions, we infer that the particles would experience larger lateral displacements moving through the pinching gap as inertia increases and/or the aperture of the constriction decreases. Thus, separation of particles based on differences in density is in principle possible, owing to the differences in inertia associated with them. We also discuss the case of significant inertia, in which the presence of a small construction may hinder separation by reducing inertia effects. △ Less

Submitted 18 June, 2013; v1 submitted 24 April, 2013; originally announced April 2013.

Journal ref: Physics of Fluids (2013) vol. 25, article 062001

Stochastic and Deterministic Vector Chromatography of Suspended Particles in 1D-Periodic Potentials

Authors: Jorge A. Bernate, German Drazer

Abstract: We present a comprehensive description of vector chromatography that includes deterministic and stochastic transport in 1D-periodic free-energy landscapes, with both energetic and entropic contributions, and highlights the parameters governing the deflection angle, i.e. the Peclet number and the partition ratio. We also investigate the dependence of the deflection angle on the shape of the free-en… ▽ More We present a comprehensive description of vector chromatography that includes deterministic and stochastic transport in 1D-periodic free-energy landscapes, with both energetic and entropic contributions, and highlights the parameters governing the deflection angle, i.e. the Peclet number and the partition ratio. We also investigate the dependence of the deflection angle on the shape of the free-energy landscape by varying the width of the linear transitions in an otherwise dichotomous potential. Finally, we present experimental results obtained in a microfluidic system in which gravity drives the suspended particles and, in combination with a bottom surface patterned with shallow rectangular grooves, creates a periodic landscape of (potential) energy barriers. The experiments validate the model and demonstrate that a simple, passive microdevice can lead to vector separation of colloidal particles based on both size and density. △ Less

Submitted 12 October, 2011; originally announced October 2011.

Comments: Submitted for consideration for publication to Physical Review Letters

Journal ref: Phys. Rev. Lett. 108, 214501 (2012)

Partition-Induced Vector Chromatography in Microfluidic Devices

Authors: Jorge A. Bernate, German Drazer

Abstract: The transport of Brownian particles in a slit geometry in the presence of an arbitrary two-dimensional periodic energy landscape and driven by an external force or convected by a flow field is investigated by means of macrotransport theory. Analytical expressions for the probability distribution and the average migration angle of the particles are obtained under the Fick-Jackobs approximation. The… ▽ More The transport of Brownian particles in a slit geometry in the presence of an arbitrary two-dimensional periodic energy landscape and driven by an external force or convected by a flow field is investigated by means of macrotransport theory. Analytical expressions for the probability distribution and the average migration angle of the particles are obtained under the Fick-Jackobs approximation. The migration angle is shown to differ from the orientation angle of the driving field and to strongly depend on the physical properties of the suspended species, thus providing the basis for vector chormatography, in which different species move in different directions and can be continuously fractionated. The potential of microfluidic devices as a platform for partition-induced vector chromatography is demonstrated by considering the particular case of a piece-wise constant, periodic potential that, in equilibrium, induces the spontaneous partition of different species into high and low concentration stripes, and which can be easily fabricated by patterning physically or chemically one of the surfaces of a channel. The feasibility to separate different particles of the same and different size is shown for systems in which partition is induced via 1g-gravity and Van der Waals interactions in physically and chemically patterned channels, respectively. △ Less

Submitted 18 May, 2010; originally announced May 2010.

Journal ref: Journal of Colloid and Interface Science Volume 356, Issue 1, 2011, Pages 341 351

Transport of Brownian particles confined to a weakly corrugated channel

Authors: Xinli Wang, German Drazer

Abstract: We investigate the average velocity of Brownian particles driven by a constant external force when constrained to move in two-dimensional, weakly-corrugated channels. We consider both the geometric confinement of the particles between solid walls as well as the soft confinement induced by a periodic potential. Using perturbation methods we show that the leading order correction to the marginal pro… ▽ More We investigate the average velocity of Brownian particles driven by a constant external force when constrained to move in two-dimensional, weakly-corrugated channels. We consider both the geometric confinement of the particles between solid walls as well as the soft confinement induced by a periodic potential. Using perturbation methods we show that the leading order correction to the marginal probability distribution of particles in the case of soft confinement is equal to that obtained in the case of geometric confinement, provided that the (configuration) integral over the cross-section of the confining potential is equal to the width of the solid channel. We then calculate the probability distribution and average velocity in the case of a sinusoidal variation in the width of the channels. The reduction on the average velocity is larger in the case of soft channels at small Péclet numbers and for relatively narrow channels and the opposite is true at large Péclet numbers and for wide channels. In the limit of large Péclet numbers the convergence to bulk velocity is faster in the case of soft channels. The leading order correction to the average velocity and marginal probability distribution agree well with Brownian Dynamics simulations for the two types of confinement and over a wide range of Péclet numbers. △ Less

Submitted 15 May, 2010; originally announced May 2010.

Journal ref: Phys. Fluids 22, 122004 (2010)

Flow channelling in a single fracture induced by shear displacement

Authors: Harold Auradou, German Drazer, Alexandro Boschan, Jean-Pierre Hulin, Joel Koplik

Abstract: The effect on the transport properties of fractures of a relative shear displacement $\vec u$ of rough walls with complementary self-affine surfaces has been studied experimentally and numerically. The shear displacement $\vec u$ induces an anisotropy of the aperture field with a correlation length scaling as $u$ and significantly larger in the direction perpendicular to $\vec u$. This reflects… ▽ More The effect on the transport properties of fractures of a relative shear displacement $\vec u$ of rough walls with complementary self-affine surfaces has been studied experimentally and numerically. The shear displacement $\vec u$ induces an anisotropy of the aperture field with a correlation length scaling as $u$ and significantly larger in the direction perpendicular to $\vec u$. This reflects the appearance of long range channels perpendicular to $\vec u$ resulting in a higher effective permeability for flow in the direction perpendicular to the shear. Miscible displacements fronts in such fractures are observed experimentally to display a self affine geometry of characteristic exponent directly related to that of the rough wall surfaces. A simple model based on the channelization of the aperture field allows to reproduces the front geometry when the mean flow is parallel to the channels created by the shear displacement. △ Less

Submitted 28 August, 2006; v1 submitted 8 March, 2006; originally announced March 2006.

Journal ref: geothermics 35 (2006) 576 - 588

Microstructure and velocity fluctuations in sheared suspensions

Authors: G. Drazer, J. Koplik, B. Khusid, A. Acrivos

Abstract: The velocity fluctuations present in macroscopically homogeneous suspensions of neutrally buoyant, non-Brownian spheres undergoing simple shear flow, and their dependence on the microstructure developed by the suspensions, are investigated in the limit of vanishingly small Reynolds numbers using Stokesian dynamics simulations. We show that, in the dilute limit, the standard deviation of the velo… ▽ More The velocity fluctuations present in macroscopically homogeneous suspensions of neutrally buoyant, non-Brownian spheres undergoing simple shear flow, and their dependence on the microstructure developed by the suspensions, are investigated in the limit of vanishingly small Reynolds numbers using Stokesian dynamics simulations. We show that, in the dilute limit, the standard deviation of the velocity fluctuations is proportional to the volume fraction, in both the transverse and the flow directions, and that a theoretical prediction, which considers only for the hydrodynamic interactions between isolated pairs of spheres, is in good agreement with the numerical results at low concentrations. We also simulate the velocity fluctuations that would result from a random hard-sphere distribution of spheres in simple shear flow, and thereby investigate the effects of the microstructure on the velocity fluctuations. Analogous results are discussed for the fluctuations in the angular velocity of the suspended spheres. In addition, we present the probability density functions for all the linear and angular velocity components, and for three different concentrations, showing a transition from a Gaussian to an Exponential and finally to a Stretched Exponential functional form as the volume fraction is decreased. We also show that, although the pair distribution function recovers its fore-aft symmetry in dilute suspensions, it remains anisotropic and that this anisotropy can be accurately described by assuming the complete absence of any permanent doublets of spheres. We finally present a simple correction to the analysis of laser-Doppler velocimetry measurements. △ Less

Submitted 18 July, 2003; originally announced July 2003.

Comments: Submitted to Journal of Fluid Mechanics

Journal ref: Journal of Fluid Mechanics (2004), 511:237-263

Adsorption phenomena in the transport of a colloidal particle through a nanochannel containing a partially wetting fluid

Authors: German Drazer, Boris Khusid, Joel Koplik, Andreas Acrivos

Abstract: Using molecular dynamics simulations, we study the motion of a closely fitting nanometer-size solid sphere in a fluid-filled cylindrical nanochannel at low Reynolds numbers and for a wide range of fluid-solid interactions corresponding to different wetting situations. For fluids that are not completely wetting we observe an interesting and novel adsorption phenomenon, in which the solid sphere,… ▽ More Using molecular dynamics simulations, we study the motion of a closely fitting nanometer-size solid sphere in a fluid-filled cylindrical nanochannel at low Reynolds numbers and for a wide range of fluid-solid interactions corresponding to different wetting situations. For fluids that are not completely wetting we observe an interesting and novel adsorption phenomenon, in which the solid sphere, that was initially moving along the center of the tube, meanders across the channel and suddenly adsorbes onto the wall. Thereafter, the adsorbed sphere either {\it sticks} to the wall and remains motionless on average, or separates slightly from the tube wall and then moves parallel to the tube axis, while rotating on average. On the other hand, at short times, i.e. when the solid particle moves with its center close to the middle of the tube, we find surprisingly good agreement between our results and the predictions of the continuum approach in spite of the large thermal fluctuations present in our simulations. △ Less

Submitted 13 June, 2002; originally announced June 2002.

Journal ref: Phys. Rev. Lett. 89, 244501 (2002)

Transport in rough self-affine fractures

Authors: German Drazer, Joel Koplik

Abstract: Transport properties of three-dimensional self-affine rough fractures are studied by means of an effective-medium analysis and numerical simulations using the Lattice-Boltzmann method. The numerical results show that the effective-medium approximation predicts the right scaling behavior of the permeability and of the velocity fluctuations, in terms of the aperture of the fracture, the roughness… ▽ More Transport properties of three-dimensional self-affine rough fractures are studied by means of an effective-medium analysis and numerical simulations using the Lattice-Boltzmann method. The numerical results show that the effective-medium approximation predicts the right scaling behavior of the permeability and of the velocity fluctuations, in terms of the aperture of the fracture, the roughness exponent and the characteristic length of the fracture surfaces, in the limit of small separation between surfaces. The permeability of the fractures is also investigated as a function of the normal and lateral relative displacements between surfaces, and is shown that it can be bounded by the permeability of two-dimensional fractures. The development of channel-like structures in the velocity field is also numerically investigated for different relative displacements between surfaces. Finally, the dispersion of tracer particles in the velocity field of the fractures is investigated by analytic and numerical methods. The asymptotic dominant role of the geometric dispersion, due to velocity fluctuations and their spatial correlations, is shown in the limit of very small separation between fracture surfaces. △ Less

Submitted 10 October, 2001; originally announced October 2001.

Comments: submitted to PRE

Journal ref: Phys. Rev. E 66, 026303 (2002)

Deterministic and stochastic behaviour of non-Brownian spheres in sheared suspensions

Authors: G. Drazer, J. Koplik, B. Khusid, A. Acrivos

Abstract: The dynamics of macroscopically homogeneous sheared suspensions of neutrally buoyant, non-Brownian spheres is investigated in the limit of vanishingly small Reynolds numbers using Stokesian dynamics. We show that the complex dynamics of sheared suspensions can be characterized as a chaotic motion in phase space and determine the dependence of the largest Lyapunov exponent on the volume fraction… ▽ More The dynamics of macroscopically homogeneous sheared suspensions of neutrally buoyant, non-Brownian spheres is investigated in the limit of vanishingly small Reynolds numbers using Stokesian dynamics. We show that the complex dynamics of sheared suspensions can be characterized as a chaotic motion in phase space and determine the dependence of the largest Lyapunov exponent on the volume fraction $φ$. The loss of memory at the microscopic level of individual particles is also shown in terms of the autocorrelation functions for the two transverse velocity components. Moreover, a negative correlation in the transverse particle velocities is seen to exist at the lower concentrations, an effect which we explain on the basis of the dynamics of two isolated spheres undergoing simple shear. In addition, we calculate the probability distribution function of the velocity fluctuations and observe, with increasing $φ$, a transition from exponential to Gaussian distributions. The simulations include a non-hydrodynamic repulsive interaction between the spheres which qualitatively models the effects of surface roughness and other irreversible effects, such as residual Brownian displacements, that become particularly important whenever pairs of spheres are nearly touching. We investigate the effects of such a non-hydrodynamic interparticle force on the scaling of the particle tracer diffusion coefficient $D$ for very dilute suspensions, and show that, when this force is very short-ranged, $D$ becomes proportional to $φ^2$ as $φ\to 0$. In contrast, when the range of the non-hydrodynamic interaction is increased, we observe a crossover in the dependence of $D$ on $φ$, from $φ^2$ to $φ$ as $φ\to 0$. △ Less

Submitted 21 May, 2001; originally announced May 2001.

Comments: Submitted to J. Fluid Mech

Journal ref: J. Fluid Mech. 460, 307 (2002)

Tracer dispersion in two-dimensional rough fractures

Authors: German Drazer, Joel Koplik

Abstract: Tracer diffusion and hydrodynamic dispersion in two-dimensional fractures with self-affine roughness is studied by analytic and numerical methods. Numerical simulations were performed via the lattice-Boltzmann approach, using a new boundary condition for tracer particles that improves the accuracy of the method. The reduction in the diffusive transport, due to the fractal geometry of the fractur… ▽ More Tracer diffusion and hydrodynamic dispersion in two-dimensional fractures with self-affine roughness is studied by analytic and numerical methods. Numerical simulations were performed via the lattice-Boltzmann approach, using a new boundary condition for tracer particles that improves the accuracy of the method. The reduction in the diffusive transport, due to the fractal geometry of the fracture surfaces, is analyzed for different fracture apertures. In the limit of small aperture fluctuations we derive the correction to the diffusive coefficient in terms of the tortuosity, which accounts for the irregular geometry of the fractures. Dispersion is studied when the two fracture surfaces are simple displaced normally to the mean fracture plane, and when there is a lateral shift as well. Numerical results are analyzed using the $Λ$-parameter, related to convective transport within the fracture, and simple arguments based on lubrication approximation. At very low Péclet number, in the case where fracture surfaces are laterally shifted, we show using several different methods that convective transport reduces dispersion. △ Less

Submitted 24 October, 2000; originally announced October 2000.

Journal ref: Phys. Rev. E, 63, 056104 (2001)

Permeability of self-affine rough fractures

Authors: German Drazer, Joel Koplik

Abstract: The permeability of two-dimensional fractures with self-affine fractal roughness is studied via analytic arguments and numerical simulations. The limit where the roughness amplitude is small compared with average fracture aperture is analyzed by a perturbation method, while in the opposite case of narrow aperture, we use heuristic arguments based on lubrication theory. Numerical simulations, usi… ▽ More The permeability of two-dimensional fractures with self-affine fractal roughness is studied via analytic arguments and numerical simulations. The limit where the roughness amplitude is small compared with average fracture aperture is analyzed by a perturbation method, while in the opposite case of narrow aperture, we use heuristic arguments based on lubrication theory. Numerical simulations, using the lattice Boltzmann method, are used to examine the complete range of aperture sizes, and confirm the analytic arguments. △ Less

Submitted 19 June, 2000; originally announced June 2000.

Comments: 11 pages, 9 figures

Journal ref: Phys. Rev. E, 62, 8076 (2000)