-
Monolayer Capping Provides Close to Optimal Resistance to Laser Dewetting of Au Films
Authors:
Christopher P. Murray,
Daniyar Mamyraimov,
Mugahid Ali,
Clive Downing,
Ian M. Povey,
David McCloskey,
David D. O'Regan,
John F. Donegan
Abstract:
Next-generation heat-assisted magnetic recording (HAMR) relies on fast, localized heating of the magnetic medium during the write process. Au plasmonic near-field transducers are an attractive solution to this challenge, but increased thermal stability of Au films is required to improve long-term reliability. This work compares the effect of nanoscale Al, AlOx, and Ta capping films on Au thin film…
▽ More
Next-generation heat-assisted magnetic recording (HAMR) relies on fast, localized heating of the magnetic medium during the write process. Au plasmonic near-field transducers are an attractive solution to this challenge, but increased thermal stability of Au films is required to improve long-term reliability. This work compares the effect of nanoscale Al, AlOx, and Ta capping films on Au thin films with Ti or Ta adhesion layers for use in HAMR and other high-temperature plasmonic applications. Thermal stability is investigated using a bespoke laser dewetting system, and SEM and AFM are extensively used to interrogate the resulting dewet areas. The most effective capping layers are found to be 0.5-1 nm of Al or AlOx, which can eliminate dewetting under certain conditions. Even one monolayer of AlOx is shown to be highly effective in reducing dewetting. In the case of thicker capping layers of Ta and AlOx, the Au film can easily dewet underneath, leaving an intact capping layer. It is concluded that thinner capping layers are most effective against dewetting as the Au cannot dewet without breaking them and pulling them apart during the dewetting process. A simple model based on energetics considerations is developed, which explains how thinner capping layers can more effectively protect the metal from pore or fissure creation. The model provides some convenient guidelines for choosing both the substrate and capping layer, for a given metal, to maximize the resistance to laser-induced damage.
△ Less
Submitted 18 December, 2024;
originally announced December 2024.
-
Multiscale Design of Au-Based Alloys for Improved Plasmon Delivery and Nanoheating in Near-Field Transducers
Authors:
Okan K. Orhan,
Frank Daniel Bello,
Nicolás Abadía,
Ortwin Hess,
John F. Donegan,
David D. O'Regan
Abstract:
Plasmonic near-field transducers (NFTs) play a key role in administering nanoscale heating for a number of applications ranging from medical devices to next generation data processing technology. We present a novel multi-scale approach, combining quantum many-body perturbation theory with finite-element modelling, to predict the electric and thermal material parameters of various Au-based, noble m…
▽ More
Plasmonic near-field transducers (NFTs) play a key role in administering nanoscale heating for a number of applications ranging from medical devices to next generation data processing technology. We present a novel multi-scale approach, combining quantum many-body perturbation theory with finite-element modelling, to predict the electric and thermal material parameters of various Au-based, noble metal (M) alloys. Specifically, we focus on modelling their performance within an NFT designed to focus high-intensity, sub-diffracted light for technologies such as nanoscale etching, manipulation, sensing, and heat-assisted magnetic recording (HAMR). Elemental Au is the long-standing general-purpose NFT medium due its excellent plasmonic performance at relevant wavelengths. However, elemental Au is a soft, ductile material that tends to extrude and deform in response to extreme temperature gradients. Therefore, alloying Au with other noble metals such as Ag, Cu, Pd or Pt, has attracted considerable interest for improved mechanical and thermal robustness while reaching threshold plasmonic generation at standard optoelectronics operating wavelengths (e.g., $\approx 830$~nm) and approximate high-power NFT temperatures ($\approx 400$~K). We predict that certain Au-Ag alloys may offer improved thermal stability as whole-NFT media compared to elemental Au, alongside plasmonic figures of merit comparable to that of Au. Simulations of certain solid solution Au-Pd/Pt alloys enable us to predict significantly enhanced thermal conductivity. We predict that alloying with Pd at low concentrations $\sim 10\%$ may preserve the NFT performance of Au, while offering the benefits of improved thermal and mechanical stability.
△ Less
Submitted 26 August, 2024;
originally announced August 2024.
-
Optical and thermal analysis of the light-heat conversion process employing an antenna-based hybrid plasmonic waveguide for HAMR
Authors:
Nicolás Abadía,
Frank Bello,
Chuan Zhong,
Patrick Flanigan,
David M. McCloskey,
Christopher Wolf,
Alexander Krichevsky,
Daniel Wolf,
Fenghua Zong,
Alireza Samani,
David V. Plant,
John F. Donegan
Abstract:
We investigate a tapered, hybrid plasmonic waveguide which has previously been proposed as an optically efficient near-field transducer (NFT), or component thereof, in several devices which aim to exploit nanofocused light. We numerically analyze how light is transported through the waveguide and ultimately focused via effective-mode coupling and taper optimization. Crucial dimensional parameters…
▽ More
We investigate a tapered, hybrid plasmonic waveguide which has previously been proposed as an optically efficient near-field transducer (NFT), or component thereof, in several devices which aim to exploit nanofocused light. We numerically analyze how light is transported through the waveguide and ultimately focused via effective-mode coupling and taper optimization. Crucial dimensional parameters in this optimization process are identified that are not only necessary to achieve maximum optical throughput, but also optimum thermal performance with specific application towards heat-assisted magnetic recording (HAMR). It is shown that existing devices constructed on similar waveguides may benefit from a heat spreader to avoid deformation of the plasmonic element which we achieve with no cost to the optical efficiency. For HAMR, our design is able to surpass many industry requirements in regard to both optical and thermal efficiency using pertinent figure of merits like 8.5% optical efficiency.
△ Less
Submitted 15 July, 2022; v1 submitted 10 May, 2022;
originally announced May 2022.
-
arXiv:2204.13030
[pdf]
physics.optics
cond-mat.other
physics.app-ph
physics.class-ph
physics.comp-ph
CMOS compatible multi-band plasmonic TE-pass polarizer
Authors:
Nicolás Abadía,
Md. Ghulam Saber,
Frank Bello,
Alireza Samani,
Eslam El-Fiky,
Yun Wang,
John F. Donegan,
David V. Plant
Abstract:
A CMOS-compatible plasmonic TE-pass polarizer capable of working in the O, E, S, C, L, and U bands is numerically analyzed. The device is based on an integrated hybrid plasmonic waveguide (HPW) with a segmented metal design. The segmented metal will avoid the propagation of the TM mode, confined in the slot of the HPW, while the TE fundamental mode will pass. The TE mode is not affected by the met…
▽ More
A CMOS-compatible plasmonic TE-pass polarizer capable of working in the O, E, S, C, L, and U bands is numerically analyzed. The device is based on an integrated hybrid plasmonic waveguide (HPW) with a segmented metal design. The segmented metal will avoid the propagation of the TM mode, confined in the slot of the HPW, while the TE fundamental mode will pass. The TE mode is not affected by the metal segmentation since it is confined in the core of the HPW. The concept of the segmented metal can be exploited in a plasmonic circuit with HPWs as the connecting waveguides between parts of the circuit and in a silicon photonics circuit with strip or slab waveguides connecting the different parts of the circuit. Using 3D FDTD simulations, it is shown that for a length of 5.5 μm the polarization extinction ratios are better than 20 dB and the insertion losses are less than 1.7 dB over all the optical communication bands.
△ Less
Submitted 15 July, 2022; v1 submitted 27 April, 2022;
originally announced April 2022.
-
arXiv:2204.13026
[pdf]
physics.optics
cond-mat.mtrl-sci
cond-mat.other
physics.app-ph
physics.class-ph
Highly fabrication tolerant InP based polarization beam splitter based on p-i-n structure
Authors:
Nicolás Abadía,
Xiangyang Dai,
Qiaoyin Lu,
Wei-Hua Guo,
David Patel,
David V. Plant,
John F. Donegan
Abstract:
In this work, a novel highly fabrication tolerant polarization beam splitter (PBS) is presented on an InP platform. To achieve the splitting, we combine the Pockels effect and the plasma dispersion effect in a symmetric 1x2 Mach-Zehnder interferometer (MZI). One p-i-n phase shifter of the MZI is driven in forward bias to exploit the plasma dispersion effect and modify the phase of both the TE and…
▽ More
In this work, a novel highly fabrication tolerant polarization beam splitter (PBS) is presented on an InP platform. To achieve the splitting, we combine the Pockels effect and the plasma dispersion effect in a symmetric 1x2 Mach-Zehnder interferometer (MZI). One p-i-n phase shifter of the MZI is driven in forward bias to exploit the plasma dispersion effect and modify the phase of both the TE and TM mode. The other arm of the MZI is driven in reverse bias to exploit the Pockels effect which affects only the TE mode. By adjusting the voltages of the two phase shifters, a different interference condition can be set for the TE and the TM modes thereby splitting them at the output of the MZI. By adjusting the voltages, the very tight fabrication tolerances known for fully passive PBS are eased. The experimental results show that an extinction ratio better than 15 dB and an on-chip loss of 3.5 dB over the full C-band (1530-1565nm) are achieved.
△ Less
Submitted 19 July, 2022; v1 submitted 27 April, 2022;
originally announced April 2022.
-
Dual-mode microresonators as straightforward access to octave-spanning dissipative Kerr solitons
Authors:
Haizhong Weng,
Adnan Ali Afridi,
Jing Li,
Michael McDermott,
Huilan Tu,
Liam P. Barry,
Qiaoyin Lu,
Weihua Guo,
John F. Donegan
Abstract:
The Kerr soliton frequency comb is a revolutionary compact ruler of coherent light that allows applications, from precision metrology to quantum information technology. The universal, reliable, and low-cost soliton microcomb source is key to these applications. In this work, we thoroughly present an innovative design strategy for realizing optical microresonators with two adjacent modes, separated…
▽ More
The Kerr soliton frequency comb is a revolutionary compact ruler of coherent light that allows applications, from precision metrology to quantum information technology. The universal, reliable, and low-cost soliton microcomb source is key to these applications. In this work, we thoroughly present an innovative design strategy for realizing optical microresonators with two adjacent modes, separated by approximately 10 GHz, which stabilizes soliton formation without using additional auxiliary laser or RF components. We demonstrate the deterministic generation of the single-solitons that span 1.5-octaves, i.e., near 200 THz, via adiabatic pump wavelength tuning. The ultra-wide soliton existence ranges up to 17 GHz not only suggests the robustness of the system but will also extend the applications of soliton combs. Moreover, the proposed scheme is found to easily give rise to multi-solitons as well as the soliton crystals featuring enhanced repetition rate (2 and 3 THz) and conversion efficiency greater than 10%. We also show the effective thermal tuning of mode separation for stably accessing single-soliton. Our results are crucial for the chip-scale self-referenced frequency combs with a simplified configuration.
△ Less
Submitted 20 February, 2022;
originally announced February 2022.
-
Absorbance Enhancement of Monolayer MoS$_2$ in a Perfect Absorbing System
Authors:
Xia Zhang,
Julia Lawless,
Jing Li,
Lisanne Peters,
Niall McEvoy,
John F. Donegan,
A. Louise Bradley
Abstract:
We reveal numerically and experimentally that dielectric resonance can enhance the absorbance and emission of monolayer MoS$_2$. By quantifying the absorbance of the Si disk resonators and the monolayer MoS$_2$ separately, a model taking into account of absorbance as well as quantum efficiency modifications by the dielectric disk resonators successfully explains the observed emission enhancement u…
▽ More
We reveal numerically and experimentally that dielectric resonance can enhance the absorbance and emission of monolayer MoS$_2$. By quantifying the absorbance of the Si disk resonators and the monolayer MoS$_2$ separately, a model taking into account of absorbance as well as quantum efficiency modifications by the dielectric disk resonators successfully explains the observed emission enhancement under the normal light incidence. It is demonstrated that the experimentally observed emission enhancement at different pump wavelength results from the absorbance enhancement, which compensates the emission quenching by the disk resonators. In order to further maximize the absorbance value of monolayer MoS$_2$, a perfect absorbing structure is proposed. By placing a Au mirror beneath the Si nanodisks, the incident electromagnetic power is fully absorbed by the hybrid monolayer MoS$_2$-disk system. It is demonstrated that the electromagnetic power is re-distributed within the hybrid structure and 53\% of the total power is absorbed by the monolayer MoS$_2$ at the perfect absorbing wavelength.
△ Less
Submitted 3 May, 2022; v1 submitted 11 December, 2021;
originally announced December 2021.
-
Near octave-spanning perfect soliton crystals in AlN microresonators
Authors:
Haizhong Weng,
Adnan Ali Afridi,
Jia Liu,
Jing Li,
Jiangnan Dai,
Xiang Ma,
Yi Zhang,
Qiaoyin Lu,
Weihua Guo,
John F. Donegan
Abstract:
The perfect soliton crystal (PSC) was recently discovered as an extraordinary Kerr soliton state with regularly distributed soliton pulses and enhanced comb line power spaced by multiples of the cavity free spectral ranges (FSRs). The modulation of continuous-wave excitation in optical microresonators and the tunable repetition rate characteristic will significantly enhance and extend the applicat…
▽ More
The perfect soliton crystal (PSC) was recently discovered as an extraordinary Kerr soliton state with regularly distributed soliton pulses and enhanced comb line power spaced by multiples of the cavity free spectral ranges (FSRs). The modulation of continuous-wave excitation in optical microresonators and the tunable repetition rate characteristic will significantly enhance and extend the application potential of soliton microcombs for self-referencing comb source, terahertz wave generation, and arbitrary waveform generation. However, the reported PSC spectrum is generally narrow. Here, we demonstrate the deterministic accessing of versatile perfect soliton crystals in the AlN microresonators (FSR ~374 GHz), featuring a broad spectral range up to 0.96 of an octave-span (1170-2300 nm) and terahertz repetition rates (up to ~1.87 THz). The measured 60-fs short pulses and low-noise characteristics confirms the high coherence of the PSCs
△ Less
Submitted 20 February, 2021;
originally announced February 2021.
-
Constructive and Destructive Interference of Kerker-type Scattering in an Ultra-thin Silicon Huygens Metasurface
Authors:
Xia Zhang,
Jing Li,
John F. Donegan,
A. Louise Bradley
Abstract:
High refractive index dielectric nanoparticles have provided a new platform for exotic light manipulation through the interference of multipole modes. The Kerker effect is one example of a Huygens source design. Rather than exploiting interference between the electric dipole and magnetic dipole, as in many conventional Huygens source designs, we explore Kerker-type suppressed backward scattering m…
▽ More
High refractive index dielectric nanoparticles have provided a new platform for exotic light manipulation through the interference of multipole modes. The Kerker effect is one example of a Huygens source design. Rather than exploiting interference between the electric dipole and magnetic dipole, as in many conventional Huygens source designs, we explore Kerker-type suppressed backward scattering mediated by the dominant electric dipole, toroidal dipole and magnetic quadrupole. These modes are provided by a designed and fabricated CMOS compatible ultra-thin Silicon nanodisk metasurface with a suppressed magnetic dipole contribution, and verified through multipole decomposition. The non-trivial substrate effect is considered using a semi-analytical transfer matrix model. The model successfully predicts the observed reflection dip. By applying a general criterion for constructive and destructive interference, it is shown that while constructive interference occurs between the electric and toroidal dipole contributions, the experimentally observed suppressed backward Kerker-type scattering arises from the destructive interference between backward scattered contributions due to the total electric dipole and the magnetic quadrupole. Our study paves the way towards new types of Huygens sources or metasurface design, such as for peculiar transverse Kerker scattering.
△ Less
Submitted 22 December, 2020;
originally announced December 2020.
-
Directly accessing octave-spanning dissipative Kerr soliton frequency combs in an AlN microring resonator
Authors:
Haizhong Weng,
Jia Liu,
Adnan Ali Afridi,
Jing Li,
Jiangnan Dai,
Xiang Ma,
Yi Zhang,
Qiaoyin Lu,
John F. Donegan,
Weihua Guo
Abstract:
Self-referenced dissipative Kerr solitons (DKSs) based on optical microresonators offer prominent characteristics including miniaturization, low power consumption, broad spectral range and inherent coherence for various applications such as precision measurement, communications, microwave photonics, and astronomical spectrometer calibration. To date, octave-spanning DKSs with a free spectral range…
▽ More
Self-referenced dissipative Kerr solitons (DKSs) based on optical microresonators offer prominent characteristics including miniaturization, low power consumption, broad spectral range and inherent coherence for various applications such as precision measurement, communications, microwave photonics, and astronomical spectrometer calibration. To date, octave-spanning DKSs with a free spectral range (FSR) of ~1 THz have been achieved only in ultrahigh-Q silicon nitride microresonators, with elaborate wavelength control required. Here we demonstrate an octave-spanning DKS in an aluminium nitride (AlN) microresonator with moderate loaded Q (500,000) and FSR of 374 GHz. In the design, a TE00 mode and a TE10 mode are nearly degenerate and act as pump and auxiliary modes. The presence of the auxiliary resonance balances the thermal dragging effect in dissipative soliton comb formation, crucially simplifying the DKS generation with a single pump and leading to a wide single soliton access window. We experimentally demonstrate stable DKS operation with a record single soliton step (~80 pm) and octave-spanning bandwidth (1100-2300 nm) through adiabatic pump tuning and on-chip power of 340 mW. Our scheme also allows for direct creation of the DKS state with high probability and without elaborate wavelength or power schemes being required to stabilize the soliton behavior.
△ Less
Submitted 20 December, 2020;
originally announced December 2020.
-
Conical diffraction and the dispersion surface of hyperbolic metamaterials
Authors:
K. E. Ballantine,
J. F. Donegan,
P. R. Eastham
Abstract:
Hyperbolic metamaterials are materials in which at least one principal dielectric constant is negative. We describe the refractive index surface, and the resulting refraction effects, for a biaxial hyperbolic metamaterial, with principal dielectric constants $ε_1<0$, $0<ε_2\neqε_3$. In this general case the two sheets of the index surface intersect forming conical singularities. We derive the ray…
▽ More
Hyperbolic metamaterials are materials in which at least one principal dielectric constant is negative. We describe the refractive index surface, and the resulting refraction effects, for a biaxial hyperbolic metamaterial, with principal dielectric constants $ε_1<0$, $0<ε_2\neqε_3$. In this general case the two sheets of the index surface intersect forming conical singularities. We derive the ray description of conical refraction in these materials, and show that it is topologically and quantitatively distinct from conical refraction in a conventional biaxial material. We also develop a wave optics description, which allows us to obtain the diffraction patterns formed from arbitrary beams incident close to the optic axis. The resulting patterns lack circular symmetry, and hence are qualitatively different from those obtained in conventional, positive index materials.
△ Less
Submitted 4 July, 2014;
originally announced July 2014.
