-
Simple Periodic Boundary Conditions for Molecular Simulation of Uniaxial Flow
Authors:
Matthew Dobson,
Abdel Kader Geraldo
Abstract:
We present rotating periodic boundary conditions (PBCs) for the simulation of nonequilibrium molecular dynamics (NEMD) under uniaxial stretching flow (USF) or biaxial stretching flow (BSF). Such nonequilibrium flows need specialized PBCs since the simulation box deforms with the background flow. The technique builds on previous models using one or lattice remappings, and is simpler than the PBCs d…
▽ More
We present rotating periodic boundary conditions (PBCs) for the simulation of nonequilibrium molecular dynamics (NEMD) under uniaxial stretching flow (USF) or biaxial stretching flow (BSF). Such nonequilibrium flows need specialized PBCs since the simulation box deforms with the background flow. The technique builds on previous models using one or lattice remappings, and is simpler than the PBCs developed for the general three dimensional flow. For general three dimensional flows, Dobson \cite{Dobson} and Hunt \cite{Hunt} proposed schemes which are not time-periodic since they use more than one automorphism remapping. This paper presents a single automorphism remapping PBCs for USF and BSF which is time periodic up to a rotation matrix and has a better minimum lattice spacing properties.
△ Less
Submitted 15 October, 2021;
originally announced October 2021.
-
The CMS Data Acquisition System for the Phase-2 Upgrade
Authors:
Jean-Marc André,
Ulf Behrens,
Andrea Bocci,
James Branson,
Sergio Cittolin,
Diego Da Silva Gomes,
Georgiana-Lavinia Darlea,
Christian Deldicque,
Zeynep Demiragli,
Marc Dobson,
Nicolas Doualot,
Samim Erhan,
Jonathan Richard Fulcher,
Dominique Gigi,
Maciej Gladki,
Frank Glege,
Guillelmo Gomez-Ceballos,
Magnus Hansen,
Jeroen Hegeman,
André Holzner,
Michael Lettrich,
Audrius Mecionis,
Frans Meijers,
Emilio Meschi,
Remigius K. Mommsen
, et al. (20 additional authors not shown)
Abstract:
During the third long shutdown of the CERN Large Hadron Collider, the CMS Detector will undergo a major upgrade to prepare for Phase-2 of the CMS physics program, starting around 2026. The upgraded CMS detector will be read out at an unprecedented data rate of up to 50 Tb/s with an event rate of 750 kHz, selected by the level-1 hardware trigger, and an average event size of 7.4 MB. Complete events…
▽ More
During the third long shutdown of the CERN Large Hadron Collider, the CMS Detector will undergo a major upgrade to prepare for Phase-2 of the CMS physics program, starting around 2026. The upgraded CMS detector will be read out at an unprecedented data rate of up to 50 Tb/s with an event rate of 750 kHz, selected by the level-1 hardware trigger, and an average event size of 7.4 MB. Complete events will be analyzed by the High-Level Trigger (HLT) using software algorithms running on standard processing nodes, potentially augmented with hardware accelerators. Selected events will be stored permanently at a rate of up to 7.5 kHz for offline processing and analysis. This paper presents the baseline design of the DAQ and HLT systems for Phase-2, taking into account the projected evolution of high speed network fabrics for event building and distribution, and the anticipated performance of general purpose CPU. In addition, some opportunities offered by reading out and processing parts of the detector data at the full LHC bunch crossing rate (40 MHz) are discussed.
△ Less
Submitted 23 June, 2018;
originally announced June 2018.
-
Particle-based simulations of steady-state mass transport at high Péclet numbers
Authors:
Thomas Müller,
Paolo Arosio,
Luke Rajah,
Samuel I. A. Cohen,
Emma V. Yates,
Michele Vendruscolo,
Chrisopher M. Dobson,
Tuomas P. J. Knowles
Abstract:
Conventional approaches for simulating steady-state distributions of particles under diffusive and advective transport at high Péclet numbers involve solving the diffusion and advection equations in at least two dimensions. Here, we present an alternative computational strategy by combining a particle-based rather than a field-based approach with the initialisation of particles in proportion to th…
▽ More
Conventional approaches for simulating steady-state distributions of particles under diffusive and advective transport at high Péclet numbers involve solving the diffusion and advection equations in at least two dimensions. Here, we present an alternative computational strategy by combining a particle-based rather than a field-based approach with the initialisation of particles in proportion to their flux. This method allows accurate prediction of the steady state and is applicable even at high Péclet numbers where traditional particle-based Monte-Carlo methods starting from randomly initialised particle distributions fail. We demonstrate that generating a flux of particles according to a predetermined density and velocity distribution at a single fixed time and initial location allows for accurate simulation of mass transport under flow. Specifically, upon initialisation in proportion to their flux, these particles are propagated individually and detected by summing up their Monte-Carlo trajectories in predefined detection regions. We demonstrate quantitative agreement of the predicted concentration profiles with the results of experiments performed with fluorescent particles in microfluidic channels under continuous flow. This approach is computationally advantageous and readily allows non-trivial initial distributions to be considered. In particular, this method is highly suitable for simulating advective and diffusive transport in microfluidic devices.
△ Less
Submitted 17 October, 2015;
originally announced October 2015.
-
Cell List Algorithms for Nonequilibrium Molecular Dynamics
Authors:
Matthew Dobson,
Ian Fox,
Alexandra Saracino
Abstract:
We present two modifications of the standard cell list algorithm for nonequilibrium molecular dynamics simulations of homogeneous, linear flows. When such a flow is modeled with periodic boundary conditions, the simulation box deforms with the flow, and recent progress has been made developing boundary conditions suitable for general 3D flows of this type. For the typical case of short-ranged, pai…
▽ More
We present two modifications of the standard cell list algorithm for nonequilibrium molecular dynamics simulations of homogeneous, linear flows. When such a flow is modeled with periodic boundary conditions, the simulation box deforms with the flow, and recent progress has been made developing boundary conditions suitable for general 3D flows of this type. For the typical case of short-ranged, pairwise interactions, the cell list algorithm reduces computational complexity of the force computation from O($N^2$) to O($N$), where $N$ is the total number of particles in the simulation box. The new versions of the cell list algorithm handle the dynamic, deforming simulation geometry. We include a comparison of the complexity and efficiency of the two proposed modifications of the standard algorithm.
△ Less
Submitted 11 December, 2014;
originally announced December 2014.
-
Nucleated polymerisation in the presence of pre-formed seed filaments
Authors:
Samuel I. A. Cohen,
Michele Vendruscolo,
Christopher M. Dobson,
Tuomas P. J. Knowles
Abstract:
We revisit the classical problem of nucleated polymerisation and derive a range of exact results describing polymerisation in systems intermediate between the well-known limiting cases of a reaction starting from purely soluble material and for a reaction where no new growth nuclei are formed.
We revisit the classical problem of nucleated polymerisation and derive a range of exact results describing polymerisation in systems intermediate between the well-known limiting cases of a reaction starting from purely soluble material and for a reaction where no new growth nuclei are formed.
△ Less
Submitted 7 July, 2011;
originally announced July 2011.
-
A Layer Correlation technique for pion energy calibration at the 2004 ATLAS Combined Beam Test
Authors:
E. Abat,
J. M. Abdallah,
T. N. Addy,
P. Adragna,
M. Aharrouche,
A. Ahmad,
T. P. A. Akesson,
M. Aleksa,
C. Alexa,
K. Anderson,
A. Andreazza,
F. Anghinolfi,
A. Antonaki,
G. Arabidze,
E. Arik,
T. Atkinson,
J. Baines,
O. K. Baker,
D. Banfi,
S. Baron,
A. J. Barr,
R. Beccherle,
H. P. Beck,
B. Belhorma,
P. J. Bell
, et al. (460 additional authors not shown)
Abstract:
A new method for calibrating the hadron response of a segmented calorimeter is developed and successfully applied to beam test data. It is based on a principal component analysis of energy deposits in the calorimeter layers, exploiting longitudinal shower development information to improve the measured energy resolution. Corrections for invisible hadronic energy and energy lost in dead material in…
▽ More
A new method for calibrating the hadron response of a segmented calorimeter is developed and successfully applied to beam test data. It is based on a principal component analysis of energy deposits in the calorimeter layers, exploiting longitudinal shower development information to improve the measured energy resolution. Corrections for invisible hadronic energy and energy lost in dead material in front of and between the calorimeters of the ATLAS experiment were calculated with simulated Geant4 Monte Carlo events and used to reconstruct the energy of pions impinging on the calorimeters during the 2004 Barrel Combined Beam Test at the CERN H8 area. For pion beams with energies between 20 GeV and 180 GeV, the particle energy is reconstructed within 3% and the energy resolution is improved by between 11% and 25% compared to the resolution at the electromagnetic scale.
△ Less
Submitted 12 May, 2011; v1 submitted 20 December, 2010;
originally announced December 2010.
