-
Polymeric Liquids in Nanoporous Photonic Structures: From Precursor Film Spreading to Imbibition Dynamics at the Nanoscale
Authors:
Guido Dittrich,
Luisa G. Cencha,
Martin Steinhart,
Ralf B. Wehrspohn,
Claudio L. A. Berli,
Raul Urteaga,
Patrick Huber
Abstract:
Polymers are known to wet nanopores with high surface energy through an atomically thin precursor film followed by slower capillary filling. We present here light interference spectroscopy using a nanoporous membrane-based chip that allows us to observe the dynamics of these phenomena in situ with sub-nanometer spatial and milli- to microsecond temporal resolution. The device consists of a mesopor…
▽ More
Polymers are known to wet nanopores with high surface energy through an atomically thin precursor film followed by slower capillary filling. We present here light interference spectroscopy using a nanoporous membrane-based chip that allows us to observe the dynamics of these phenomena in situ with sub-nanometer spatial and milli- to microsecond temporal resolution. The device consists of a mesoporous silicon film (average pore size 6 nm) with an integrated photonic crystal, which permits to simultaneously measure the phase shift of the thin-film interference and the resonance of the photonic crystal upon imbibition. For a styrene dimer, we find a flat fluid front without a precursor film, while the pentamer forms an expanding molecular thin film moving in front of the menisci of the capillary filling. These different behaviors are attributed to a significantly faster pore-surface diffusion compared to the imbibition dynamics for the pentamer and vice versa for the dimer. In addition, both oligomers exhibit anomalously slow imbibition dynamics, which could be explained by apparent viscosities of six and eleven times the bulk value, respectively. However, a more consistent description of the dynamics is achieved by a constriction model that emphasizes the increasing importance of local undulations in the pore radius with the molecular size and includes a sub-nanometer hydrodynamic dead, immobile zone at the pore wall, but otherwise uses bulk fluid parameters. Overall, our study illustrates that interferometric, opto-fluidic experiments with nanoporous media allow for a remarkably detailed exploration of the nano-rheology of polymeric liquids.
△ Less
Submitted 30 November, 2023;
originally announced December 2023.
-
Statistical Analysis of Submicron X-Ray Tomography Data on Polymer Imbibition into Arrays of Cylindrical Nanopores
Authors:
Fernando Vazquez Luna,
Michael Gerstenberger,
Guido Dittrich,
Juliana Martins de Souza e Silva,
Patrick Huber,
Ralf Wehrspohn,
Martin Steinhart
Abstract:
Frozen transient imbibition states in arrays of straight cylindrical pores 400 nm in diameter were imaged by phase-contrast X-ray computed tomography with single-pore resolution. A semi-automatic algorithm yielding brightness profiles along all pores identified within the probed sample volume is described. Imbibition front positions are determined by descriptive statistics. A first approach involv…
▽ More
Frozen transient imbibition states in arrays of straight cylindrical pores 400 nm in diameter were imaged by phase-contrast X-ray computed tomography with single-pore resolution. A semi-automatic algorithm yielding brightness profiles along all pores identified within the probed sample volume is described. Imbibition front positions are determined by descriptive statistics. A first approach involves the evaluation of frequency densities of single-pore imbibition lengths, a second one the evaluation of the statistical brightness dispersion within the probed volume as a function of the distance from the pore mouths. We plotted average imbibition front positions against systematically varied powers of the imbibition time and determined the optimal exponent of the imbibition time by considering the correlation coefficients of the corresponding linear fits. Thus, slight deviations from the proportionality of the average imbibition front position to the square root of the imbibition time predicted by the Lucas-Washburn theory were found. A meaningful preexponential factor in the power law relating imbibition front position and imbibition time may only be determined after ambiguities regarding the exponent of the imbibition time are resolved. The dispersion of peaks representing the imbibition front in frequency densities of single-pore imbibition lengths and in brightness dispersion profiles plotted against the pore depth is suggested as measure of the imbibition front width. Phase-contrast X-ray computed tomography allows the evaluation of a large number of infiltrated submicron pores taking advantage of phase-contrast imaging; artifacts related to sample damage by tomography requiring physical ablation of sample material are avoided.
△ Less
Submitted 23 November, 2021;
originally announced November 2021.
-
Precursor Film Spreading during Liquid Imbibition in Nanoporous Photonic Crystals
Authors:
Luisa G. Cencha,
Guido Dittrich,
Patrick Huber,
Claudio L. A. Berli,
Raul Urteaga
Abstract:
When a macroscopic droplet spreads, a thin precursor film of liquid moves ahead of the advancing liquid-solid-vapor contact line. Whereas this phenomenon has been explored extensively for planar solid substrates, its presence in nanostructured geometries has barely been studied so far, despite its importance for many natural and technological fluid transport processes. Here we use porous photonic…
▽ More
When a macroscopic droplet spreads, a thin precursor film of liquid moves ahead of the advancing liquid-solid-vapor contact line. Whereas this phenomenon has been explored extensively for planar solid substrates, its presence in nanostructured geometries has barely been studied so far, despite its importance for many natural and technological fluid transport processes. Here we use porous photonic crystals in silicon to resolve by light interferometry capillarity-driven spreading of liquid fronts in pores of few nanometers in radius. Upon spatiotemporal rescaling the fluid profiles collapse on master curves indicating that all imbibition fronts follow a square-root-of-time broadening dynamics. For the simple liquid (glycerol) a sharp front with a widening typical of Lucas-Washburn capillary-rise dynamics in a medium with pore-size distribution occurs. By contrast, for a polymer (PDMS) a precursor film moving ahead of the main menisci entirely alters the nature of the nanoscale transport, in agreement with predictions of computer simulations.
△ Less
Submitted 10 November, 2020;
originally announced November 2020.
-
Silicon Flexes Muscles: Giant Electrochemical Actuation in a Nanoporous Silicon-Polypyrrole Hybrid Material
Authors:
Manuel Brinker,
Guido Dittrich,
Claudia Richert,
Pirmin Lakner,
Tobias Krekeler,
Thomas F. Keller,
Norbert Huber,
Patrick Huber
Abstract:
The absence of piezoelectricity in silicon makes direct electro-mechanical applications of this mainstream semiconductor impossible. Integrated electrical control of the silicon mechanics, however, would open up new perspectives for on-chip actuorics. Here, we combine wafer-scale nanoporosity in single-crystalline silicon with polymerization of an artificial muscle material inside pore space to sy…
▽ More
The absence of piezoelectricity in silicon makes direct electro-mechanical applications of this mainstream semiconductor impossible. Integrated electrical control of the silicon mechanics, however, would open up new perspectives for on-chip actuorics. Here, we combine wafer-scale nanoporosity in single-crystalline silicon with polymerization of an artificial muscle material inside pore space to synthesize a composite that shows macroscopic electrostrain in aqueous electrolyte. The voltage-strain coupling is 3 orders of magnitude larger than the best-performing ceramics in terms of piezoelectric actuation. We trace this huge electroactuation to the concerted action of 100 billions of nanopores per square centimetre cross-section and to potential-dependent pressures of up to 150 atmospheres at the single-pore scale. The exceptionally small operation voltages (0.4-0.9 V) along with the sustainable and biocompatible base materials make this hybrid promising for bio-actuator applications.
△ Less
Submitted 8 October, 2020;
originally announced October 2020.
