-
How stable are the impact factors of major astrophysics journals
Authors:
Rayani Venkat Sai Rithvik,
Shantanu Desai
Abstract:
We examine the long-term trends in impact factor over the past decade (2015-2014) for seven flagship journals widely used in Astrophysics: ApJ, AJ, ApJL, ApJS,A &A, JCAP, and MNRAS. We check the variation of both the traditional impact factor as well as the median-based impact factor, which we had studied in a previous work. We find that ApJS exhibits the largest drop in impact factor from 14.9 to…
▽ More
We examine the long-term trends in impact factor over the past decade (2015-2014) for seven flagship journals widely used in Astrophysics: ApJ, AJ, ApJL, ApJS,A &A, JCAP, and MNRAS. We check the variation of both the traditional impact factor as well as the median-based impact factor, which we had studied in a previous work. We find that ApJS exhibits the largest drop in impact factor from 14.9 to 9.0, while ApJ and MNRAS show a steady decline from 6.7 to 5.2 and 5.6 to 5.0, respectively. However, the impact factors for AJ and ApJL have shown a steady increase from 4.55 to 5.35 and 6.4 to 9.7, respectively. The median-based impact factors are much more stable showing variations of at most $\pm 1$ within the last decade.
△ Less
Submitted 16 March, 2025;
originally announced March 2025.
-
Photometry of outer Solar System objects from the Dark Energy Survey II: a joint analysis of trans-Neptunian absolute magnitudes, colors, lightcurves and dynamics
Authors:
Pedro H. Bernardinelli,
Gary M. Bernstein,
T. M. C. Abbott,
M. Aguena,
S. S. Allam,
D. Brooks,
A. Carnero Rosell,
J. Carretero,
L. N. da Costa,
M. E. S. Pereira,
T. M. Davis,
J. De Vicente,
S. Desai,
H. T. Diehl,
P. Doel,
S. Everett,
B. Flaugher,
J. Frieman,
J. García-Bellido,
E. Gaztanaga,
R. A. Gruendl,
G. Gutierrez,
K. Herner,
S. R. Hinton,
D. L. Hollowood
, et al. (21 additional authors not shown)
Abstract:
For the 696 trans-Neptunian objects (TNOs) with absolute magnitudes $5.5 < H_r < 8.2$ detected in the Dark Energy Survey (DES), we characterize the relationships between their dynamical state and physical properties -- namely $H_r$, indicating size; colors, indicating surface composition; and flux variation semi-amplitude $A$, indicating asphericity and surface inhomogeneity. We seek ``birth'' phy…
▽ More
For the 696 trans-Neptunian objects (TNOs) with absolute magnitudes $5.5 < H_r < 8.2$ detected in the Dark Energy Survey (DES), we characterize the relationships between their dynamical state and physical properties -- namely $H_r$, indicating size; colors, indicating surface composition; and flux variation semi-amplitude $A$, indicating asphericity and surface inhomogeneity. We seek ``birth'' physical distributions that can recreate these parameters in every dynamical class. We show that the observed colors of these TNOs are consistent with 2 Gaussian distributions in $griz$ space, ``near-IR bright'' (NIRB) and ``near-IR faint'' (NIRF), presumably an inner and outer birth population, respectively. We find a model in which both the NIRB and NIRF $H_r$ and $A$ distributions are independent of current dynamical states, supporting their assignment as birth populations. All objects are consistent with a common rolling $p(H_r)$, but NIRF objects are significantly more variable. Cold classicals (CCs) are purely NIRF, while hot classical (HC), scattered, and detached TNOs are consistent with $\approx70\%$ NIRB, and resonances' NIRB fractions show significant variation. The NIRB component of the HCs and of some resonances have broader inclination distributions than the NIRFs, i.e. their current dynamics retains information about birth location. We find evidence for radial stratification within the birth NIRB population, in that HC NIRBs are on average redder than detached or scattered NIRBs; a similar effect distinguishes CCs from other NIRFs. We estimate total object counts and masses of each class within our $H_r$ range. These results will strongly constrain models of the outer solar system.
△ Less
Submitted 2 January, 2025;
originally announced January 2025.
-
AutoSciLab: A Self-Driving Laboratory For Interpretable Scientific Discovery
Authors:
Saaketh Desai,
Sadhvikas Addamane,
Jeffrey Y. Tsao,
Igal Brener,
Laura P. Swiler,
Remi Dingreville,
Prasad P. Iyer
Abstract:
Advances in robotic control and sensing have propelled the rise of automated scientific laboratories capable of high-throughput experiments. However, automated scientific laboratories are currently limited by human intuition in their ability to efficiently design and interpret experiments in high-dimensional spaces, throttling scientific discovery. We present AutoSciLab, a machine learning framewo…
▽ More
Advances in robotic control and sensing have propelled the rise of automated scientific laboratories capable of high-throughput experiments. However, automated scientific laboratories are currently limited by human intuition in their ability to efficiently design and interpret experiments in high-dimensional spaces, throttling scientific discovery. We present AutoSciLab, a machine learning framework for driving autonomous scientific experiments, forming a surrogate researcher purposed for scientific discovery in high-dimensional spaces. AutoSciLab autonomously follows the scientific method in four steps: (i) generating high-dimensional experiments (x \in R^D) using a variational autoencoder (ii) selecting optimal experiments by forming hypotheses using active learning (iii) distilling the experimental results to discover relevant low-dimensional latent variables (z \in R^d, with d << D) with a 'directional autoencoder' and (iv) learning a human interpretable equation connecting the discovered latent variables with a quantity of interest (y = f(z)), using a neural network equation learner. We validate the generalizability of AutoSciLab by rediscovering a) the principles of projectile motion and b) the phase transitions within the spin-states of the Ising model (NP-hard problem). Applying our framework to an open-ended nanophotonics challenge, AutoSciLab uncovers a fundamentally novel method for directing incoherent light emission that surpasses the current state-of-the-art (Iyer et al. 2023b, 2020).
△ Less
Submitted 16 December, 2024;
originally announced December 2024.
-
A meta-analysis of impact factors of astrophysics journals
Authors:
Rayani Venkat Sai Rithvik,
Shantanu Desai
Abstract:
We calculate the 2024 impact factors for the 38 most widely used journals in Astrophysics, using the citations collated by NASA/ADS (Astrophysics Data System) and compare them to the official impact factors. This includes journals which publish papers outside of astrophysics such as PRD, EPJC, Nature, etc. We also propose a new metric to gauge the impact factor based on the median number of citati…
▽ More
We calculate the 2024 impact factors for the 38 most widely used journals in Astrophysics, using the citations collated by NASA/ADS (Astrophysics Data System) and compare them to the official impact factors. This includes journals which publish papers outside of astrophysics such as PRD, EPJC, Nature, etc. We also propose a new metric to gauge the impact factor based on the median number of citations in a journal and calculate the same for all the journals. We find that the ADS-based impact factors are mostly in agreement, albeit higher than the official impact factors for most journals. The journals with the maximum fractional difference in median-based and old impact factors are JHEAP and PTEP. We find the maximum difference between the ADS and official impact factor for Nature.
△ Less
Submitted 4 May, 2025; v1 submitted 4 October, 2024;
originally announced October 2024.
-
Self-driving lab discovers principles for steering spontaneous emission
Authors:
Saaketh Desai,
Sadhvikas Addamane,
Jeffery Y. Tsao,
Igal Brener,
Remi Dingreville,
Prasad P. Iyer
Abstract:
We developed an autonomous experimentation platform to accelerate interpretable scientific discovery in ultrafast nanophotonics, targeting a novel method to steer spontaneous emission from reconfigurable semiconductor metasurfaces. Controlling spontaneous emission is crucial for clean-energy solutions in illumination, thermal radiation engineering, and remote sensing. Despite the potential of reco…
▽ More
We developed an autonomous experimentation platform to accelerate interpretable scientific discovery in ultrafast nanophotonics, targeting a novel method to steer spontaneous emission from reconfigurable semiconductor metasurfaces. Controlling spontaneous emission is crucial for clean-energy solutions in illumination, thermal radiation engineering, and remote sensing. Despite the potential of reconfigurable semiconductor metasurfaces with embedded sources for spatiotemporal control, achieving arbitrary far-field control remains challenging. Here, we present a self-driving lab (SDL) platform that addresses this challenge by discovering the governing equations for predicting the far-field emission profile from light-emitting metasurfaces. We discover that both the spatial gradient (grating-like) and the curvature (lens-like) of the local refractive index are key factors in steering spontaneous emission. The SDL employs a machine-learning framework comprising: (1) a variational autoencoder for generating complex spatial refractive index profiles, (2) an active learning agent for guiding experiments with real-time closed-loop feedback, and (3) a neural network-based equation learner to uncover structure-property relationships. The SDL demonstrated a four-fold enhancement in peak emission directivity (up to 77%) over a 72° field of view within ~300 experiments. Our findings reveal that combinations of positive gratings and lenses are as effective as negative lenses and gratings for all emission angles, offering a novel strategy for controlling spontaneous emission beyond conventional Fourier optics.
△ Less
Submitted 24 July, 2024; v1 submitted 22 July, 2024;
originally announced July 2024.
-
First (calibration) experiment using proton beam from FRENA at SINP
Authors:
C. Basu,
K. Banerjee,
T. K. Ghosh,
G. Mukherjee,
C. Bhattacharya,
Shraddha S Desai,
R. Shil,
A. K. Saha,
J. K. Meena,
T. Bar,
D. Basak,
L. K. Sahoo,
S. Saha,
C. Marick,
D. Das,
D. Das,
D. Das,
M. Kujur,
S. Roy,
S. S. Basu,
U. Gond,
A. Saha,
A. Das,
M. Samanta,
P. Saha
, et al. (1 additional authors not shown)
Abstract:
This work presents the first calibration experiment of a 3 MV Tandetron accelerator, FRENA, performed in May 2022. The $^7$Li(p,n) reaction threshold was measured to calibrate the terminal voltage measuring device. A LiF target of thickness 175 $μ$g/cm$^2$ was used in the experiment. The measured threshold was 1872$\pm$2.7 keV, indicating 6$-$10 keV energy shift.
This work presents the first calibration experiment of a 3 MV Tandetron accelerator, FRENA, performed in May 2022. The $^7$Li(p,n) reaction threshold was measured to calibrate the terminal voltage measuring device. A LiF target of thickness 175 $μ$g/cm$^2$ was used in the experiment. The measured threshold was 1872$\pm$2.7 keV, indicating 6$-$10 keV energy shift.
△ Less
Submitted 24 January, 2024;
originally announced February 2024.
-
Rethinking materials simulations: Blending direct numerical simulations with neural operators
Authors:
Vivek Oommen,
Khemraj Shukla,
Saaketh Desai,
Remi Dingreville,
George Em Karniadakis
Abstract:
Direct numerical simulations (DNS) are accurate but computationally expensive for predicting materials evolution across timescales, due to the complexity of the underlying evolution equations, the nature of multiscale spatio-temporal interactions, and the need to reach long-time integration. We develop a new method that blends numerical solvers with neural operators to accelerate such simulations.…
▽ More
Direct numerical simulations (DNS) are accurate but computationally expensive for predicting materials evolution across timescales, due to the complexity of the underlying evolution equations, the nature of multiscale spatio-temporal interactions, and the need to reach long-time integration. We develop a new method that blends numerical solvers with neural operators to accelerate such simulations. This methodology is based on the integration of a community numerical solver with a U-Net neural operator, enhanced by a temporal-conditioning mechanism that enables accurate extrapolation and efficient time-to-solution predictions of the dynamics. We demonstrate the effectiveness of this framework on simulations of microstructure evolution during physical vapor deposition modeled via the phase-field method. Such simulations exhibit high spatial gradients due to the co-evolution of different material phases with simultaneous slow and fast materials dynamics. We establish accurate extrapolation of the coupled solver with up to 16.5$\times$ speed-up compared to DNS. This methodology is generalizable to a broad range of evolutionary models, from solid mechanics, to fluid dynamics, geophysics, climate, and more.
△ Less
Submitted 8 December, 2023;
originally announced December 2023.
-
Monte-Carlo ray-tracing studies of multiplexed prismatic graphite analyzers for the cold-neutron triple-axis spectrometer at the High Flux Isotope Reactor
Authors:
Adit S. Desai,
Travis J. Williams,
Marcus Daum,
Gabriele Sala,
Adam A. Aczel,
Garrett E. Granroth,
Martin Mourigal
Abstract:
A modern cold triple-axis spectrometer to study quantum condensed matter systems is planned for the High Flux Isotope Reactor (HFIR) at Oak Ridge National Laboratory. Here, we describe the conceptual principles and design of a secondary spectrometer using a multiplexed, prismatic analyzer system relying on graphite crystals and inspired by the successful implementation of the Continuous Angle Mult…
▽ More
A modern cold triple-axis spectrometer to study quantum condensed matter systems is planned for the High Flux Isotope Reactor (HFIR) at Oak Ridge National Laboratory. Here, we describe the conceptual principles and design of a secondary spectrometer using a multiplexed, prismatic analyzer system relying on graphite crystals and inspired by the successful implementation of the Continuous Angle Multiple Energy Analysis (CAMEA) spectrometers at the Paul Scherrer Institute. This project is currently known as MANTA for Multi-analyzer Neutron Triple-Axis. We report Monte-Carlo ray-tracing simulations on a simple but realistic sample scattering kernel to further illustrate the prismatic analyzer concept's workings, calibration, and performance. Then, we introduce a new statistical analysis approach based on the prismatic analyzer concept to improve the number of final energies measured on the spectrometer. We also study possible evolutions in the CAMEA design relevant for MANTA.
△ Less
Submitted 16 June, 2024; v1 submitted 5 December, 2023;
originally announced December 2023.
-
Bayesian inference of $W$-boson mass
Authors:
Aaseesh Rallapalli,
Shantanu Desai
Abstract:
We use a Bayesian regression technique (similar to a recent analysis by Rinaldi et al) to obtain a central estimate for the $W$-boson mass using four different combinations of datasets compiled by the PDG including the 2022 CDF result. We use three different priors on the unknown intrinsic scatter and also a non-parametric hierarchical Dirichlet Process Gaussian Mixture model to obtain a world ave…
▽ More
We use a Bayesian regression technique (similar to a recent analysis by Rinaldi et al) to obtain a central estimate for the $W$-boson mass using four different combinations of datasets compiled by the PDG including the 2022 CDF result. We use three different priors on the unknown intrinsic scatter and also a non-parametric hierarchical Dirichlet Process Gaussian Mixture model to obtain a world average for $W$-boson mass. We also evaluate the statistical significance of the discrepancy with respect to the Standard model for each of the datasets. We find that for all the combination of datasets and the aformentioned prior choices, the discrepancy with respect to the Standard Model value for the $W$-mass is less than 3$σ$. We also checked that if we use a narrow prior on the intrinsic scatter, we get a discrepancy of about 3.8$σ$ compared to the Standard model value.
△ Less
Submitted 26 June, 2023; v1 submitted 23 January, 2023;
originally announced January 2023.
-
Lessons Learned from the Two Largest Galaxy Morphological Classification Catalogues built by Convolutional Neural Networks
Authors:
Ting-Yun Cheng,
H. Domínguez Sánchez,
J. Vega-Ferrero,
C. J. Conselice,
M. Siudek,
A. Aragón-Salamanca,
M. Bernardi,
R. Cooke,
L. Ferreira,
M. Huertas-Company,
J. Krywult,
A. Palmese,
A. Pieres,
A. A. Plazas Malagón,
A. Carnero Rosell,
D. Gruen,
D. Thomas,
D. Bacon,
D. Brooks,
D. J. James,
D. L. Hollowood,
D. Friedel,
E. Suchyta,
E. Sanchez,
F. Menanteau
, et al. (32 additional authors not shown)
Abstract:
We compare the two largest galaxy morphology catalogues, which separate early and late type galaxies at intermediate redshift. The two catalogues were built by applying supervised deep learning (convolutional neural networks, CNNs) to the Dark Energy Survey data down to a magnitude limit of $\sim$21 mag. The methodologies used for the construction of the catalogues include differences such as the…
▽ More
We compare the two largest galaxy morphology catalogues, which separate early and late type galaxies at intermediate redshift. The two catalogues were built by applying supervised deep learning (convolutional neural networks, CNNs) to the Dark Energy Survey data down to a magnitude limit of $\sim$21 mag. The methodologies used for the construction of the catalogues include differences such as the cutout sizes, the labels used for training, and the input to the CNN - monochromatic images versus $gri$-band normalized images. In addition, one catalogue is trained using bright galaxies observed with DES ($i<18$), while the other is trained with bright galaxies ($r<17.5$) and `emulated' galaxies up to $r$-band magnitude $22.5$. Despite the different approaches, the agreement between the two catalogues is excellent up to $i<19$, demonstrating that CNN predictions are reliable for samples at least one magnitude fainter than the training sample limit. It also shows that morphological classifications based on monochromatic images are comparable to those based on $gri$-band images, at least in the bright regime. At fainter magnitudes, $i>19$, the overall agreement is good ($\sim$95\%), but is mostly driven by the large spiral fraction in the two catalogues. In contrast, the agreement within the elliptical population is not as good, especially at faint magnitudes. By studying the mismatched cases we are able to identify lenticular galaxies (at least up to $i<19$), which are difficult to distinguish using standard classification approaches. The synergy of both catalogues provides an unique opportunity to select a population of unusual galaxies.
△ Less
Submitted 14 September, 2022;
originally announced September 2022.
-
Nonproliferation and fusion power plants
Authors:
Michael Y. Hua,
Sachin S. Desai,
Amy C. Roma,
Angela Di Fulvio,
Craig J. Mundie,
Sara A. Pozzi
Abstract:
This is an abridged abstract; please see the full paper. This paper evaluates whether the nuclear nonproliferation regime applies to fusion power plants and finds that, legally, the regime does not apply. The paper then examines whether the nonproliferation regime should apply to fusion based on a technical evaluation. The paper concludes that fusion should continue to fall outside the nonprolifer…
▽ More
This is an abridged abstract; please see the full paper. This paper evaluates whether the nuclear nonproliferation regime applies to fusion power plants and finds that, legally, the regime does not apply. The paper then examines whether the nonproliferation regime should apply to fusion based on a technical evaluation. The paper concludes that fusion should continue to fall outside the nonproliferation regime and that the global, dual-use export control regime, including potentially developing a "controls by design" usage-based control regime, is better suited for commercial fusion energy.
△ Less
Submitted 23 August, 2022; v1 submitted 28 July, 2022;
originally announced July 2022.
-
Cosmic Ray Rejection with Attention Augmented Deep Learning
Authors:
S. R. Bhavanam,
Sumohana S. Channappayya,
P. K. Srijith,
Shantanu Desai
Abstract:
Cosmic Ray (CR) hits are the major contaminants in astronomical imaging and spectroscopic observations involving solid-state detectors. Correctly identifying and masking them is a crucial part of the image processing pipeline, since it may otherwise lead to spurious detections. For this purpose, we have developed and tested a novel Deep Learning based framework for the automatic detection of CR hi…
▽ More
Cosmic Ray (CR) hits are the major contaminants in astronomical imaging and spectroscopic observations involving solid-state detectors. Correctly identifying and masking them is a crucial part of the image processing pipeline, since it may otherwise lead to spurious detections. For this purpose, we have developed and tested a novel Deep Learning based framework for the automatic detection of CR hits from astronomical imaging data from two different imagers: Dark Energy Camera (DECam) and Las Cumbres Observatory Global Telescope (LCOGT). We considered two baseline models namely deepCR and Cosmic-CoNN, which are the current state-of-the-art learning based algorithms that were trained using Hubble Space Telescope (HST) ACS/WFC and LCOGT Network images respectively. We have experimented with the idea of augmenting the baseline models using Attention Gates (AGs) to improve the CR detection performance. We have trained our models on DECam data and demonstrate a consistent marginal improvement by adding AGs in True Positive Rate (TPR) at 0.01% False Positive Rate (FPR) and Precision at 95% TPR over the aforementioned baseline models for the DECam dataset. We demonstrate that the proposed AG augmented models provide significant gain in TPR at 0.01% FPR when tested on previously unseen LCO test data having images from three distinct telescope classes. Furthermore, we demonstrate that the proposed baseline models with and without attention augmentation outperform state-of-the-art models such as Astro-SCRAPPY, Maximask (that is trained natively on DECam data) and pre-trained ground-based Cosmic-CoNN. This study demonstrates that the AG module augmentation enables us to get a better deepCR and Cosmic-CoNN models and to improve their generalization capability on unseen data.
△ Less
Submitted 21 July, 2022;
originally announced July 2022.
-
Do Pulsar and Fast Radio Burst dispersion measures obey Benford's law?
Authors:
Pragna Mamidipaka,
Shantanu Desai
Abstract:
We check if the first significant digit of the dispersion measure of pulsars and Fast Radio Bursts (using the CHIME catalog) is consistent with the Benford distribution. We find a large disagreement with Benford's law with $χ^2$ close to 80 for 8 degrees of freedom for both these aforementioned datasets. This corresponds to a discrepancy of about 7$σ$. Therefore, we conclude that the dispersion me…
▽ More
We check if the first significant digit of the dispersion measure of pulsars and Fast Radio Bursts (using the CHIME catalog) is consistent with the Benford distribution. We find a large disagreement with Benford's law with $χ^2$ close to 80 for 8 degrees of freedom for both these aforementioned datasets. This corresponds to a discrepancy of about 7$σ$. Therefore, we conclude that the dispersion measures of pulsars and FRBs do not obey Benford's law.
△ Less
Submitted 20 July, 2022;
originally announced July 2022.
-
Evaluation of finite difference based asynchronous partial differential equations solver for reacting flows
Authors:
Komal Kumari,
Emmet Cleary,
Swapnil Desai,
Diego A. Donzis,
Jacqueline H. Chen,
Konduri Aditya
Abstract:
Next-generation exascale machines with extreme levels of parallelism will provide massive computing resources for large scale numerical simulations of complex physical systems at unprecedented parameter ranges. However, novel numerical methods, scalable algorithms and re-design of current state-of-the art numerical solvers are required for scaling to these machines with minimal overheads. One such…
▽ More
Next-generation exascale machines with extreme levels of parallelism will provide massive computing resources for large scale numerical simulations of complex physical systems at unprecedented parameter ranges. However, novel numerical methods, scalable algorithms and re-design of current state-of-the art numerical solvers are required for scaling to these machines with minimal overheads. One such approach for partial differential equations based solvers involves computation of spatial derivatives with possibly delayed or asynchronous data using high-order asynchrony-tolerant (AT) schemes to facilitate mitigation of communication and synchronization bottlenecks without affecting the numerical accuracy. In the present study, an effective methodology of implementing temporal discretization using a multi-stage Runge-Kutta method with AT schemes is presented. Together these schemes are used to perform asynchronous simulations of canonical reacting flow problems, demonstrated in one-dimension including auto-ignition of a premixture, premixed flame propagation and non-premixed autoignition. Simulation results show that the AT schemes incur very small numerical errors in all key quantities of interest including stiff intermediate species despite delayed data at processing element (PE) boundaries. For simulations of supersonic flows, the degraded numerical accuracy of well-known shock-resolving WENO (weighted essentially non-oscillatory) schemes when used with relaxed synchronization is also discussed. To overcome this loss of accuracy, high-order AT-WENO schemes are derived and tested on linear and non-linear equations. Finally the novel AT-WENO schemes are demonstrated in the propagation of a detonation wave with delays at PE boundaries.
△ Less
Submitted 3 April, 2022;
originally announced April 2022.
-
One-Shot Transfer Learning of Physics-Informed Neural Networks
Authors:
Shaan Desai,
Marios Mattheakis,
Hayden Joy,
Pavlos Protopapas,
Stephen Roberts
Abstract:
Solving differential equations efficiently and accurately sits at the heart of progress in many areas of scientific research, from classical dynamical systems to quantum mechanics. There is a surge of interest in using Physics-Informed Neural Networks (PINNs) to tackle such problems as they provide numerous benefits over traditional numerical approaches. Despite their potential benefits for solvin…
▽ More
Solving differential equations efficiently and accurately sits at the heart of progress in many areas of scientific research, from classical dynamical systems to quantum mechanics. There is a surge of interest in using Physics-Informed Neural Networks (PINNs) to tackle such problems as they provide numerous benefits over traditional numerical approaches. Despite their potential benefits for solving differential equations, transfer learning has been under explored. In this study, we present a general framework for transfer learning PINNs that results in one-shot inference for linear systems of both ordinary and partial differential equations. This means that highly accurate solutions to many unknown differential equations can be obtained instantaneously without retraining an entire network. We demonstrate the efficacy of the proposed deep learning approach by solving several real-world problems, such as first- and second-order linear ordinary equations, the Poisson equation, and the time-dependent Schrodinger complex-value partial differential equation.
△ Less
Submitted 5 July, 2022; v1 submitted 21 October, 2021;
originally announced October 2021.
-
Active learning and molecular dynamics simulations to find high melting temperature alloys
Authors:
David E. Farache,
Juan C. Verduzco,
Zachary D. McClure,
Saaketh Desai,
Alejandro Strachan
Abstract:
Active learning (AL) can drastically accelerate materials discovery; its power has been shown in various classes of materials and target properties. Prior efforts have used machine learning models for the optimal selection of physical experiments or physics-based simulations. However, the latter efforts have been mostly limited to the use of electronic structure calculations and properties that ca…
▽ More
Active learning (AL) can drastically accelerate materials discovery; its power has been shown in various classes of materials and target properties. Prior efforts have used machine learning models for the optimal selection of physical experiments or physics-based simulations. However, the latter efforts have been mostly limited to the use of electronic structure calculations and properties that can be obtained at the unit cell level and with negligible noise. We couple AL with molecular dynamics simulations to identify multiple principal component alloys (MPCAs) with high melting temperatures. Building on cloud computing services through nanoHUB, we present a fully autonomous workflow for the efficient exploration of the high dimensional compositional space of MPCAs. We characterize how uncertainties arising from the stochastic nature of the simulations and the acquisition functions used to select simulations affect the convergence of the approach. Interestingly, we find that relatively short simulations with significant uncertainties can be used to efficiently find the desired alloys as the random forest models used for AL average out fluctuations.
△ Less
Submitted 15 October, 2021;
originally announced October 2021.
-
Port-Hamiltonian Neural Networks for Learning Explicit Time-Dependent Dynamical Systems
Authors:
Shaan Desai,
Marios Mattheakis,
David Sondak,
Pavlos Protopapas,
Stephen Roberts
Abstract:
Accurately learning the temporal behavior of dynamical systems requires models with well-chosen learning biases. Recent innovations embed the Hamiltonian and Lagrangian formalisms into neural networks and demonstrate a significant improvement over other approaches in predicting trajectories of physical systems. These methods generally tackle autonomous systems that depend implicitly on time or sys…
▽ More
Accurately learning the temporal behavior of dynamical systems requires models with well-chosen learning biases. Recent innovations embed the Hamiltonian and Lagrangian formalisms into neural networks and demonstrate a significant improvement over other approaches in predicting trajectories of physical systems. These methods generally tackle autonomous systems that depend implicitly on time or systems for which a control signal is known apriori. Despite this success, many real world dynamical systems are non-autonomous, driven by time-dependent forces and experience energy dissipation. In this study, we address the challenge of learning from such non-autonomous systems by embedding the port-Hamiltonian formalism into neural networks, a versatile framework that can capture energy dissipation and time-dependent control forces. We show that the proposed \emph{port-Hamiltonian neural network} can efficiently learn the dynamics of nonlinear physical systems of practical interest and accurately recover the underlying stationary Hamiltonian, time-dependent force, and dissipative coefficient. A promising outcome of our network is its ability to learn and predict chaotic systems such as the Duffing equation, for which the trajectories are typically hard to learn.
△ Less
Submitted 16 July, 2021;
originally announced July 2021.
-
Parsimonious neural networks learn interpretable physical laws
Authors:
Saaketh Desai,
Alejandro Strachan
Abstract:
Machine learning is playing an increasing role in the physical sciences and significant progress has been made towards embedding domain knowledge into models. Less explored is its use to discover interpretable physical laws from data. We propose parsimonious neural networks (PNNs) that combine neural networks with evolutionary optimization to find models that balance accuracy with parsimony. The p…
▽ More
Machine learning is playing an increasing role in the physical sciences and significant progress has been made towards embedding domain knowledge into models. Less explored is its use to discover interpretable physical laws from data. We propose parsimonious neural networks (PNNs) that combine neural networks with evolutionary optimization to find models that balance accuracy with parsimony. The power and versatility of the approach is demonstrated by developing models for classical mechanics and to predict the melting temperature of materials from fundamental properties. In the first example, the resulting PNNs are easily interpretable as Newton's second law, expressed as a non-trivial time integrator that exhibits time-reversibility and conserves energy, where the parsimony is critical to extract underlying symmetries from the data. In the second case, the PNNs not only find the celebrated Lindemann melting law, but also new relationships that outperform it in the pareto sense of parsimony vs. accuracy.
△ Less
Submitted 16 December, 2020; v1 submitted 8 May, 2020;
originally announced May 2020.
-
Implementing a neural network interatomic model with performance portability for emerging exascale architectures
Authors:
Saaketh Desai,
Samuel Temple Reeve,
James F. Belak
Abstract:
The two main thrusts of computational science are more accurate predictions and faster calculations; to this end, the zeitgeist in molecular dynamics (MD) simulations is pursuing machine learned and data driven interatomic models, e.g. neural network potentials, and novel hardware architectures, e.g. GPUs. Current implementations of neural network potentials are orders of magnitude slower than tra…
▽ More
The two main thrusts of computational science are more accurate predictions and faster calculations; to this end, the zeitgeist in molecular dynamics (MD) simulations is pursuing machine learned and data driven interatomic models, e.g. neural network potentials, and novel hardware architectures, e.g. GPUs. Current implementations of neural network potentials are orders of magnitude slower than traditional interatomic models and while looming exascale computing offers the ability to run large, accurate simulations with these models, achieving portable performance for MD with new and varied exascale hardware requires rethinking traditional algorithms, using novel data structures, and library solutions. We re-implement a neural network interatomic model in CabanaMD, an MD proxy application, built on libraries developed for performance portability. Our implementation shows significantly improved on-node scaling in this complex kernel as compared to a current LAMMPS implementation, across both strong and weak scaling. Our single-source solution results in improved performance in many cases, with thread-scalability enabling simulations up to 21 million atoms on a single CPU node and 2 million atoms on a single GPU. We also explore parallelism and data layout choices (using flexible data structures called AoSoAs) and their effect on performance, seeing up to ~25% and ~10% improvements in performance on a GPU simply by choosing the right level of parallelism and data layout, respectively.
△ Less
Submitted 21 February, 2020; v1 submitted 31 January, 2020;
originally announced February 2020.
-
Tuning martensitic transformations via coherent second phases in nanolaminates using free energy landscape engineering
Authors:
Saaketh Desai,
Samuel Temple Reeve,
Karthik Guda Vishnu,
Alejandro Strachan
Abstract:
We explore the possibilities and limitations of using a coherent second phase to engineer the thermo-mechanical properties of a martensitic alloy by modifying the underlying free energy landscape that controls the transformation. We use molecular dynamics simulations of a model atomistic system where the properties of a coherent, nanoscale second phase can be varied systematically. With a base mar…
▽ More
We explore the possibilities and limitations of using a coherent second phase to engineer the thermo-mechanical properties of a martensitic alloy by modifying the underlying free energy landscape that controls the transformation. We use molecular dynamics simulations of a model atomistic system where the properties of a coherent, nanoscale second phase can be varied systematically. With a base martensitic material that undergoes a temperature-induced transformation from a cubic austenite to a monoclinic martensite, the simulations show a significant ability to engineer the transformation temperatures, from a ~50% reduction to a ~200% increase, with 50 at. % of the cubic second phase. We establish correlations between the properties of the second phase and the transformation characteristics and microstructure, via the free energy landscape of the two-phase systems. Coherency stresses have a strong influence on the martensitic variants observed and can even cause the non-martensitic second phase to undergo a transformation. Reducing the stiffness of second phase increases the transformation strain and modifies the martensitic microstructure, increasing the volume fraction of the transformed material. This increase in transformation strain is accompanied by a significant increase in the Af and thermal hysteresis, while the Ms remains unaltered. Our findings on the tunability of martensitic transformations can be used for informed searches of second phases to achieve desired material properties, such as achieving room temperature, lightweight shape memory alloys.
△ Less
Submitted 26 May, 2020; v1 submitted 21 November, 2019;
originally announced November 2019.
-
Deep learning-based quality filtering of mechanically exfoliated 2D crystals
Authors:
Yu Saito,
Kento Shin,
Kei Terayama1,
Shaan Desai,
Masaru Onga,
Yuji Nakagawa,
Yuki M. Itahashi,
Yoshihiro Iwasa,
Makoto Yamada,
Koji Tsuda
Abstract:
Two-dimensional (2D) crystals are attracting growing interest in various research fields such as engineering, physics, chemistry, pharmacy and biology owing to their low dimensionality and dramatic change of properties compared to the bulk counterparts. Among the various techniques used to manufacture 2D crystals, mechanical exfoliation has been essential to practical applications and fundamental…
▽ More
Two-dimensional (2D) crystals are attracting growing interest in various research fields such as engineering, physics, chemistry, pharmacy and biology owing to their low dimensionality and dramatic change of properties compared to the bulk counterparts. Among the various techniques used to manufacture 2D crystals, mechanical exfoliation has been essential to practical applications and fundamental research. However, mechanically exfoliated crystals on substrates contain relatively thick flakes that must be found and removed manually, limiting high-throughput manufacturing of atomic 2D crystals and van der Waals heterostructures. Here we present a deep learning-based method to segment and identify the thickness of atomic layer flakes from optical microscopy images. Through carefully designing a neural network based on U-Net, we found that our neural network based on U-net trained only with the data based on 24 images successfully distinguish monolayer and bilayer MoS2 with a success rate of 70%, which is a practical value in the first screening process for choosing monolayer and bilayer flakes of MoS2 of all flakes on substrates without human eye. The remarkable results highlight the possibility that a large fraction of manual laboratory work can be replaced by AI-based systems, boosting productivity.
△ Less
Submitted 7 July, 2019;
originally announced July 2019.
-
A meta-analysis of neutron lifetime measurements
Authors:
Ashwani Rajan,
Shantanu Desai
Abstract:
We calculated the median as well as weighted mean central estimates for the neutron lifetime, from a subset of measurements compiled in the 2019 update of the Particle Data Group (PDG). We then reconstruct the error distributions for the residuals using three different central estimates and then check for consistency with a Gaussian distribution. We find that although the error distributions using…
▽ More
We calculated the median as well as weighted mean central estimates for the neutron lifetime, from a subset of measurements compiled in the 2019 update of the Particle Data Group (PDG). We then reconstruct the error distributions for the residuals using three different central estimates and then check for consistency with a Gaussian distribution. We find that although the error distributions using the weighted mean as well as median estimate are consistent with a Gaussian distribution, the Student's $t$ and Cauchy distribution provide a better fit. This median statistic estimate of the neutron lifetime from these measurements is given by $881.5 \pm 0.47$ seconds. This can be used as an alternate estimate of the neutron lifetime. We also note that the discrepancy between beam and bottle-based measurements using median statistics of the neutron lifetime persists with a significance between 4-8$σ$, depending on which combination of measurements is used.
△ Less
Submitted 13 November, 2019; v1 submitted 23 December, 2018;
originally announced December 2018.
-
Variational Inference as an alternative to MCMC for parameter estimation and model selection
Authors:
Geetakrishnasai Gunapati,
Anirudh Jain,
P. K. Srijith,
Shantanu Desai
Abstract:
Most applications of Bayesian Inference for parameter estimation and model selection in astrophysics involve the use of Monte Carlo techniques such as Markov Chain Monte Carlo (MCMC) and nested sampling. However, these techniques are time consuming and their convergence to the posterior could be difficult to determine. In this work, we advocate Variational inference as an alternative to solve the…
▽ More
Most applications of Bayesian Inference for parameter estimation and model selection in astrophysics involve the use of Monte Carlo techniques such as Markov Chain Monte Carlo (MCMC) and nested sampling. However, these techniques are time consuming and their convergence to the posterior could be difficult to determine. In this work, we advocate Variational inference as an alternative to solve the above problems, and demonstrate its usefulness for parameter estimation and model selection in Astrophysics. Variational inference converts the inference problem into an optimization problem by approximating the posterior from a known family of distributions and using Kullback-Leibler divergence to characterize the difference. It takes advantage of fast optimization techniques, which make it ideal to deal with large datasets and makes it trivial to parallelize on a multicore platform. We also derive a new approximate evidence estimation based on variational posterior, and importance sampling technique called posterior weighted importance sampling for the calculation of evidence (PWISE), which is useful to perform Bayesian model selection. As a proof of principle, we apply variational inference to five different problems in astrophysics, where Monte Carlo techniques were previously used. These include assessment of significance of annual modulation in the COSINE-100 dark matter experiment, measuring exoplanet orbital parameters from radial velocity data, tests of periodicities in measurements of Newton's constant $G$, assessing the significance of a turnover in the spectral lag data of GRB 160625B and estimating the mass of a galaxy cluster using weak gravitational lensing. We find that variational inference is much faster than MCMC and nested sampling techniques for most of these problems while providing competitive results. All our analysis codes have been made publicly available.
△ Less
Submitted 23 December, 2021; v1 submitted 17 March, 2018;
originally announced March 2018.
-
Non-Gaussian Error Distributions of Galactic Rotation Speed Measurements
Authors:
Ashwani Rajan,
Shantanu Desai
Abstract:
We construct the error distributions for the galactic rotation speed ($Θ_0$) using 137 data points from measurements compiled in De Grijs et al. (arXiv:1709.02501), with all observations normalized to the galactocentric distance of 8.3 kpc. We then checked (using the same procedures as in works by Ratra et al) if the errors constructed using the weighted mean and the median as the estimate, obey G…
▽ More
We construct the error distributions for the galactic rotation speed ($Θ_0$) using 137 data points from measurements compiled in De Grijs et al. (arXiv:1709.02501), with all observations normalized to the galactocentric distance of 8.3 kpc. We then checked (using the same procedures as in works by Ratra et al) if the errors constructed using the weighted mean and the median as the estimate, obey Gaussian statistics. We find using both these estimates that they have much wider tails than a Gaussian distribution. We also tried to fit the data to three other distributions: Cauchy, double-exponential, and Students-t. The best fit is obtained using the Students-$t$ distribution for $n=2$ using the median value as the central estimate, corresponding to a $p$-value of 0.1. We also calculate the median value of $Θ_0$ using all the data as well as using the median of each set of measurements based on the tracer population used. Because of the non-gaussianity of the residuals, we point out that the subgroup median value, given by $Θ_{med}=219.65$ km/sec should be used as the central estimate for $Θ_0$.
△ Less
Submitted 20 February, 2018; v1 submitted 18 October, 2017;
originally announced October 2017.
-
Do tau lepton branching fractions obey Benford's law?
Authors:
Aisha Dantuluri,
Shantanu Desai
Abstract:
According to Benford's law, the most significant digit in many datasets is not uniformly distributed, but obeys a well defined power law distribution with smaller digits appearing more often. Among one of the myriad particle physics datasets available, we find that the leading decimal digit for the $τ$ lepton branching fraction shows marginal disagreement with the logarithmic behavior expected fro…
▽ More
According to Benford's law, the most significant digit in many datasets is not uniformly distributed, but obeys a well defined power law distribution with smaller digits appearing more often. Among one of the myriad particle physics datasets available, we find that the leading decimal digit for the $τ$ lepton branching fraction shows marginal disagreement with the logarithmic behavior expected from the Benford distribution. We quantify the deviation from Benford's law using a $χ^2$ function valid for binomial data, and obtain a $χ^2$ value of 16.9 for nine degrees of freedom, which gives a $p$-value of about 5%, corresponding to a 1.6$σ$ disagreement. We also checked that the disagreement persists under scaling the branching fractions, as well as by redoing the analysis in a numerical system with a base different from 10. Among all the digits, `9' shows the largest discrepancy with an excess of $4σ$. This discrepancy is because the digit `9' is repeated for three distinct groups of correlated modes, with each group having a frequency of two or three, leading to double-counting. If we count each group of correlated modes only once, the discrepancy for this digit also disappears and we get pristine agreement with Benford distribution.
△ Less
Submitted 4 May, 2018; v1 submitted 28 September, 2017;
originally announced September 2017.
-
Multimodel Response Assessment for Monthly Rainfall Distribution in Some Selected Indian Cities Using Best Fit Probability as a Tool
Authors:
Anumandla Sukrutha,
Sristi Ram Dyuthi,
Shantanu Desai
Abstract:
We carry out a study of the statistical distribution of rainfall precipitation data for 20 cites in India. We have determined the best-fit probability distribution for these cities from the monthly precipitation data spanning 100 years of observations from 1901 to 2002. To fit the observed data, we considered 10 different distributions. The efficacy of the fits for these distributions was evaluate…
▽ More
We carry out a study of the statistical distribution of rainfall precipitation data for 20 cites in India. We have determined the best-fit probability distribution for these cities from the monthly precipitation data spanning 100 years of observations from 1901 to 2002. To fit the observed data, we considered 10 different distributions. The efficacy of the fits for these distributions was evaluated using four empirical non-parametric goodness-of-fit tests namely Kolmogorov-Smirnov, Anderson-Darling, Chi-Square, Akaike information criterion, and Bayesian Information criterion. Finally, the best-fit distribution using each of these tests were reported, by combining the results from the model comparison tests. We then find that for most of the cities, Generalized Extreme-Value Distribution or Inverse Gaussian Distribution most adequately fits the observed data.
△ Less
Submitted 9 August, 2018; v1 submitted 10 August, 2017;
originally announced August 2017.
-
Classifying Exoplanets with Gaussian Mixture Model
Authors:
Soham Kulkarni,
Shantanu Desai
Abstract:
Recently, Odrzywolek and Rafelski (arXiv:1612.03556) have found three distinct categories of exoplanets, when they are classified based on density. We first carry out a similar classification of exoplanets according to their density using the Gaussian Mixture Model, followed by information theoretic criterion (AIC and BIC) to determine the optimum number of components. Such a one-dimensional class…
▽ More
Recently, Odrzywolek and Rafelski (arXiv:1612.03556) have found three distinct categories of exoplanets, when they are classified based on density. We first carry out a similar classification of exoplanets according to their density using the Gaussian Mixture Model, followed by information theoretic criterion (AIC and BIC) to determine the optimum number of components. Such a one-dimensional classification favors two components using AIC and three using BIC, but the statistical significance from both the tests is not significant enough to decisively pick the best model between two and three components. We then extend this GMM-based classification to two dimensions by using both the density and the Earth similarity index (arXiv:1702.03678), which is a measure of how similar each planet is compared to the Earth. For this two-dimensional classification, both AIC and BIC provide decisive evidence in favor of three components.
△ Less
Submitted 1 June, 2018; v1 submitted 2 August, 2017;
originally announced August 2017.
-
Molecular Modeling of the Microstructure Evolution during the Carbonization of PAN-Based Carbon Fibers
Authors:
Saaketh Desai,
Chunyu Li,
Tongtong Shen,
Alejandro Strachan
Abstract:
Development of high strength carbon fibers (CFs) requires an understanding of the relationship between the processing conditions, microstructure and resulting properties. We developed a molecular model that combines kinetic Monte Carlo (KMC) and molecular dynamics (MD) techniques to predict the microstructure evolution during the carbonization process of carbon fiber manufacturing. The model accur…
▽ More
Development of high strength carbon fibers (CFs) requires an understanding of the relationship between the processing conditions, microstructure and resulting properties. We developed a molecular model that combines kinetic Monte Carlo (KMC) and molecular dynamics (MD) techniques to predict the microstructure evolution during the carbonization process of carbon fiber manufacturing. The model accurately predicts the cross-sectional microstructure of carbon fibers, predicting features such as graphitic sheets and hairpin structures that have been observed experimentally. We predict the transverse modulus of the resulting fibers and find that the modulus is slightly lower than experimental values, but is up to an order of magnitude lower than ideal graphite. We attribute this to the perfect longitudinal texture of our simulated structures, as well as the chain sliding mechanism that governs the deformation of the fibers, rather than the van der Waals interaction that governs the modulus for graphite. We also observe that high reaction rates result in porous structures that have lower moduli.
△ Less
Submitted 24 March, 2017;
originally announced March 2017.
-
Detection and Removal of Artifacts in Astronomical Images
Authors:
Shantanu Desai,
Joseph Mohr,
Emmanuel Bertin,
Martin Kummel,
Michael Wetzstein
Abstract:
Astronomical images from optical photometric surveys are typically contaminated with transient artifacts such as cosmic rays, satellite trails and scattered light. We have developed and tested an algorithm that removes these artifacts using a deep, artifact free, static sky coadd image built up through the median combination of point spread function (PSF) homogenized, overlapping single epoch imag…
▽ More
Astronomical images from optical photometric surveys are typically contaminated with transient artifacts such as cosmic rays, satellite trails and scattered light. We have developed and tested an algorithm that removes these artifacts using a deep, artifact free, static sky coadd image built up through the median combination of point spread function (PSF) homogenized, overlapping single epoch images. Transient artifacts are detected and masked in each single epoch image through comparison with an artifact free, PSF-matched simulated image that is constructed using the PSF-corrected, model fitting catalog from the artifact free coadd image together with the position variable PSF model of the single epoch image. This approach works well not only for cleaning single epoch images with worse seeing than the PSF homogenized coadd, but also the traditionally much more challenging problem of cleaning single epoch images with better seeing. In addition to masking transient artifacts, we have developed an interpolation approach that uses the local PSF and performs well in removing artifacts whose widths are smaller than the PSF full width at half maximum, including cosmic rays, the peaks of saturated stars and bleed trails. We have tested this algorithm on Dark Energy Survey Science Verification data and present performance metrics. More generally, our algorithm can be applied to any survey which images the same part of the sky multiple times.
△ Less
Submitted 16 April, 2016; v1 submitted 26 January, 2016;
originally announced January 2016.
-
First measurement of muon-neutrino disappearance in NOvA
Authors:
P. Adamson,
C. Ader,
M. Andrews,
N. Anfimov,
I. Anghel,
K. Arms,
E. Arrieta-Diaz,
A. Aurisano,
D. Ayres,
C. Backhouse,
M. Baird,
B. A. Bambah,
K. Bays,
R. Bernstein,
M. Betancourt,
V. Bhatnagar,
B. Bhuyan,
J. Bian,
K. Biery,
T. Blackburn,
V. Bocean,
D. Bogert,
A. Bolshakova,
M. Bowden,
C. Bower
, et al. (235 additional authors not shown)
Abstract:
This paper reports the first measurement using the NOvA detectors of $ν_μ$ disappearance in a $ν_μ$ beam. The analysis uses a 14 kton-equivalent exposure of $2.74 \times 10^{20}$ protons-on-target from the Fermilab NuMI beam. Assuming the normal neutrino mass hierarchy, we measure $Δm^{2}_{32}=(2.52^{+0.20}_{-0.18})\times 10^{-3}$ eV$^{2}$ and $\sin^2θ_{23}$ in the range 0.38-0.65, both at the 68%…
▽ More
This paper reports the first measurement using the NOvA detectors of $ν_μ$ disappearance in a $ν_μ$ beam. The analysis uses a 14 kton-equivalent exposure of $2.74 \times 10^{20}$ protons-on-target from the Fermilab NuMI beam. Assuming the normal neutrino mass hierarchy, we measure $Δm^{2}_{32}=(2.52^{+0.20}_{-0.18})\times 10^{-3}$ eV$^{2}$ and $\sin^2θ_{23}$ in the range 0.38-0.65, both at the 68% confidence level, with two statistically-degenerate best fit points at $\sin^2θ_{23} = $ 0.43 and 0.60. Results for the inverted mass hierarchy are also presented.
△ Less
Submitted 20 January, 2016; v1 submitted 19 January, 2016;
originally announced January 2016.
-
First measurement of electron neutrino appearance in NOvA
Authors:
P. Adamson,
C. Ader,
M. Andrews,
N. Anfimov,
I. Anghel,
K. Arms,
E. Arrieta-Diaz,
A. Aurisano,
D. S. Ayres,
C. Backhouse,
M. Baird,
B. A. Bambah,
K. Bays,
R. Bernstein,
M. Betancourt,
V. Bhatnagar,
B. Bhuyan,
J. Bian,
K. Biery,
T. Blackburn,
V. Bocean,
D. Bogert,
A. Bolshakova,
M. Bowden,
C. Bower
, et al. (235 additional authors not shown)
Abstract:
We report results from the first search for $ν_μ\toν_e$ transitions by the NOvA experiment. In an exposure equivalent to $2.74\times10^{20}$ protons-on-target in the upgraded NuMI beam at Fermilab, we observe 6 events in the Far Detector, compared to a background expectation of $0.99\pm0.11$ (syst.) events based on the Near Detector measurement. A secondary analysis observes 11 events with a backg…
▽ More
We report results from the first search for $ν_μ\toν_e$ transitions by the NOvA experiment. In an exposure equivalent to $2.74\times10^{20}$ protons-on-target in the upgraded NuMI beam at Fermilab, we observe 6 events in the Far Detector, compared to a background expectation of $0.99\pm0.11$ (syst.) events based on the Near Detector measurement. A secondary analysis observes 11 events with a background of $1.07\pm0.14$ (syst.). The $3.3σ$ excess of events observed in the primary analysis disfavors $0.1π< δ_{CP} < 0.5π$ in the inverted mass hierarchy at the 90% C.L.
△ Less
Submitted 2 May, 2016; v1 submitted 19 January, 2016;
originally announced January 2016.
-
The D0 Silicon Microstrip Tracker
Authors:
S. N. Ahmed,
R. Angstadt,
M. Aoki,
B. Åsman,
S. Austin,
L. Bagby,
E. Barberis,
P. Baringer,
A. Bean,
A. Bischoff,
F. Blekman,
T. A. Bolton,
C. Boswell,
M. Bowden,
F. Browning,
D. Buchholz,
S. Burdin,
D. Butler,
H. Cease,
S. Choi,
A. R. Clark,
J. Clutter,
A. Cooper,
W. E. Cooper,
M. Corcoran
, et al. (109 additional authors not shown)
Abstract:
This paper describes the mechanical design, the readout chain, the production, testing and the installation of the Silicon Microstrip Tracker of the D0 experiment at the Fermilab Tevatron collider. In addition, description of the performance of the detector during the experiment data collection between 2001 and 2010 is provided.
This paper describes the mechanical design, the readout chain, the production, testing and the installation of the Silicon Microstrip Tracker of the D0 experiment at the Fermilab Tevatron collider. In addition, description of the performance of the detector during the experiment data collection between 2001 and 2010 is provided.
△ Less
Submitted 5 May, 2010;
originally announced May 2010.
