-
A semi-analytical method using auxiliary sine series for vibration and sound radiation of a rectangular plate with elastic edges
Authors:
Guoming Deng,
Xian Wu,
Changxiao Shao,
Songlin Zheng,
Jianwang Shao
Abstract:
This paper proposes an efficient semi-analytical method using auxiliary sine series for transverse vibration and sound radiation of a thin rectangular plate with edges elastically restrained against translation and rotation. The formulation, constructed by two-dimensional sine and/or cosine series, can approximately express the bending displacement, and calculate vibration and sound radiation unde…
▽ More
This paper proposes an efficient semi-analytical method using auxiliary sine series for transverse vibration and sound radiation of a thin rectangular plate with edges elastically restrained against translation and rotation. The formulation, constructed by two-dimensional sine and/or cosine series, can approximately express the bending displacement, and calculate vibration and sound radiation under excitation of point force, arbitrary-angle plane wave, or diffuse acoustic field with acceptable accuracy. It is also applied for baffled or unbaffled conditions. A post-process program is developed to predict vibrating frequencies and modes, mean square velocity spectrum, and sound transmission loss via reduced-order integrals of radiation impedances. The method is validated by experiment and simulation results, demonstrating accurate and efficient computation using a single program for transverse vibration and sound radiation of a plate under different elastic boundary conditions and different excitations. Formulas given in this paper provide a basis for the code development on transverse vibration and sound radiation analysis of thin plates.
△ Less
Submitted 15 September, 2024;
originally announced September 2024.
-
Suppression of Edge Localized Modes in ITER Baseline Scenario in EAST using Edge Localized Magnetic Perturbations
Authors:
P. Xie,
Y. Sun,
M. Jia,
A. Loarte,
Y. Q. Liu,
C. Ye,
S. Gu,
H. Sheng,
Y. Liang,
Q. Ma,
H. Yang,
C. A. Paz-Soldan,
G. Deng,
S. Fu,
G. Chen,
K. He,
T. Jia,
D. Lu,
B. Lv,
J. Qian,
H. H. Wang,
S. Wang,
D. Weisberg,
X. Wu,
W. Xu
, et al. (9 additional authors not shown)
Abstract:
We report the suppression of Type-I Edge Localized Modes (ELMs) in the EAST tokamak under ITER baseline conditions using $n = 4$ Resonant Magnetic Perturbations (RMPs), while maintaining energy confinement. Achieving RMP-ELM suppression requires a normalized plasma beta ($β_N$) exceeding 1.8 in a target plasma with $q_{95}\approx 3.1$ and tungsten divertors. Quasi-linear modeling shows high plasma…
▽ More
We report the suppression of Type-I Edge Localized Modes (ELMs) in the EAST tokamak under ITER baseline conditions using $n = 4$ Resonant Magnetic Perturbations (RMPs), while maintaining energy confinement. Achieving RMP-ELM suppression requires a normalized plasma beta ($β_N$) exceeding 1.8 in a target plasma with $q_{95}\approx 3.1$ and tungsten divertors. Quasi-linear modeling shows high plasma beta enhances RMP-driven neoclassical toroidal viscosity torque, reducing field penetration thresholds. These findings demonstrate the feasibility and efficiency of high $n$ RMPs for ELM suppression in ITER.
△ Less
Submitted 6 August, 2024;
originally announced August 2024.
-
Thorium doped strontium fluoride crystal: a unique candidate for solid nuclear optical clock material
Authors:
Qiaorui Gong,
Shanming Li,
Shulong Zhang,
Siliang Tao,
Guoliang Deng,
Peixiong Zhang,
Chengchun Zhao,
Yin Hang,
Shining Zhu,
Longsheng Ma
Abstract:
We report a candidate with unique advantages in the cultivation of solid-state nuclear clock material, Th:SrF2 crystal. It not only has a segregation coefficient close to 1, which can achieve highly efficient and uniform doping of Th, but also ensures a high transmittance (~69% at 150 nm) while achieving extremely high doping concentration (232Th>6*10^20 cm^(-3). In addition, SrF2 crystal will not…
▽ More
We report a candidate with unique advantages in the cultivation of solid-state nuclear clock material, Th:SrF2 crystal. It not only has a segregation coefficient close to 1, which can achieve highly efficient and uniform doping of Th, but also ensures a high transmittance (~69% at 150 nm) while achieving extremely high doping concentration (232Th>6*10^20 cm^(-3). In addition, SrF2 crystal will not be irradiated-colored under strong α radiation like CaF2 crystal, Th:SrF2 crystal is expected to fully unleash its high concentration doping characteristics while ensuring its transmission performance in nuclear transition band not be severely affected by 229Th radiation damage.
△ Less
Submitted 3 July, 2024;
originally announced July 2024.
-
Capturing dynamics and thermodynamics of a three-level quantum heat engine via programmable quantum circuits
Authors:
Gao-xiang Deng,
Zhe He,
Yu Liu,
Wei Shao,
Zheng Cui
Abstract:
This research employs the Kraus representation and Sz.-Nagy dilation theorem to model a three-level quantum heat on quantum circuits, investigating its dynamic evolution and thermodynamic performance. The feasibility of the dynamic model is validated by tracking the changes of population. On the basis of reinforcement learning algorithm, the optimal cycle of the quantum heat engine for maximal ave…
▽ More
This research employs the Kraus representation and Sz.-Nagy dilation theorem to model a three-level quantum heat on quantum circuits, investigating its dynamic evolution and thermodynamic performance. The feasibility of the dynamic model is validated by tracking the changes of population. On the basis of reinforcement learning algorithm, the optimal cycle of the quantum heat engine for maximal average power is proposed and verified by the thermodynamic model. The stability of quantum circuit simulations is scrutinized through a comparative analysis of theoretical and simulated results, predicated on an orthogonal test. These results affirm the practicality of simulating quantum heat engines on quantum circuits, offering potential for substantially curtailing the experimental expenses associated with the construction of such engines.
△ Less
Submitted 27 May, 2024;
originally announced May 2024.
-
Technical Design Report of the Spin Physics Detector at NICA
Authors:
The SPD Collaboration,
V. Abazov,
V. Abramov,
L. Afanasyev,
R. Akhunzyanov,
A. Akindinov,
I. Alekseev,
A. Aleshko,
V. Alexakhin,
G. Alexeev,
L. Alimov,
A. Allakhverdieva,
A. Amoroso,
V. Andreev,
V. Andreev,
E. Andronov,
Yu. Anikin,
S. Anischenko,
A. Anisenkov,
V. Anosov,
E. Antokhin,
A. Antonov,
S. Antsupov,
A. Anufriev,
K. Asadova
, et al. (392 additional authors not shown)
Abstract:
The Spin Physics Detector collaboration proposes to install a universal detector in the second interaction point of the NICA collider under construction (JINR, Dubna) to study the spin structure of the proton and deuteron and other spin-related phenomena using a unique possibility to operate with polarized proton and deuteron beams at a collision energy up to 27 GeV and a luminosity up to…
▽ More
The Spin Physics Detector collaboration proposes to install a universal detector in the second interaction point of the NICA collider under construction (JINR, Dubna) to study the spin structure of the proton and deuteron and other spin-related phenomena using a unique possibility to operate with polarized proton and deuteron beams at a collision energy up to 27 GeV and a luminosity up to $10^{32}$ cm$^{-2}$ s$^{-1}$. As the main goal, the experiment aims to provide access to the gluon TMD PDFs in the proton and deuteron, as well as the gluon transversity distribution and tensor PDFs in the deuteron, via the measurement of specific single and double spin asymmetries using different complementary probes such as charmonia, open charm, and prompt photon production processes. Other polarized and unpolarized physics is possible, especially at the first stage of NICA operation with reduced luminosity and collision energy of the proton and ion beams. This document is dedicated exclusively to technical issues of the SPD setup construction.
△ Less
Submitted 28 May, 2024; v1 submitted 12 April, 2024;
originally announced April 2024.
-
Experimental demonstration of steady-state dynamics of three-level quantum heat engine using superconducting quantum circuits
Authors:
Gao-xiang Deng,
Haoqiang Ai,
Wei Shao,
Yu Liu,
Zheng Cui
Abstract:
The three-level system represents the smallest quantum system capable of autonomous cycling in quantum heat engines. This study proposes a method to simulate the steady-state dynamics of a three-level quantum heat engine by designing and implementing superconducting quantum circuits. Following error mitigation, the outcomes from the quantum circuit model designed in this study, when executed on a…
▽ More
The three-level system represents the smallest quantum system capable of autonomous cycling in quantum heat engines. This study proposes a method to simulate the steady-state dynamics of a three-level quantum heat engine by designing and implementing superconducting quantum circuits. Following error mitigation, the outcomes from the quantum circuit model designed in this study, when executed on a real quantum device, closely align with theoretical predictions, thereby validating the effectiveness of the circuit model. This study offers a novel approach for investigating three-level quantum heat engines, enabling the verification of theoretical research findings while also reducing the complexity and cost of experimental procedures.
△ Less
Submitted 14 May, 2024; v1 submitted 28 January, 2024;
originally announced January 2024.
-
Discrete frequency-bin entanglement generation via cascaded second-order nonlinear processes in Sagnac interferometer
Authors:
Jiarui Li,
Chenzhi Yuan,
Si Shen,
Zichang Zhang,
Ruiming Zhang,
Hao Li,
You Wang,
Guangwei Deng,
Lixing You,
Zhen Wang,
Haizhi Song,
Yunru Fan,
Guangcan Guo,
Qiang Zhou
Abstract:
Discrete frequency-bin entanglement is an essential resource for applications in quantum information processing. In this Letter, we propose and demonstrate a scheme to generate discrete frequency-bin entanglement with a single piece of periodically poled lithium niobate waveguide in a modified Sagnac interferometer. Correlated two-photon states in both directions of the Sagnac interferometer are g…
▽ More
Discrete frequency-bin entanglement is an essential resource for applications in quantum information processing. In this Letter, we propose and demonstrate a scheme to generate discrete frequency-bin entanglement with a single piece of periodically poled lithium niobate waveguide in a modified Sagnac interferometer. Correlated two-photon states in both directions of the Sagnac interferometer are generated through cascaded second-order optical nonlinear processes. A relative phase difference between the two states is introduced by changing the polarization state of pump light, thus manipulating the two-photon state at the output of the Sagnac interferometer. The generated two-photon state is sent into a fiber polarization splitter, then a pure discrete frequency-bin entangled two-photon state is obtained by setting the pump light. The frequency entanglement property is measured by a spatial quantum beating with a visibility of $96.0 \pm 6.1\%$. The density matrix is further obtained with a fidelity of $98.0 \pm 3.0\%$ to the ideal state. Our demonstration provides a promising method for the generation of pure discrete frequency-bin entanglement at telecom band, which is desired in quantum photonics.
△ Less
Submitted 27 April, 2023;
originally announced April 2023.
-
Continuous Three-level Quantum Heat Engine with High Performance Under Medium Temperature Difference
Authors:
Gao-xiang Deng,
Wei Shao,
Yu Liu,
Zheng Cui
Abstract:
The possibility of utilizing quantum effects to enhance the performance of quantum heat engines has been an active topic of research, but how to enhance the performance by optimizing the engine parameters needs to be further studied. In this study, the temperature difference and dissipation modes affecting the performance of a three-level quantum heat engine were analyzed using an orthogonal test.…
▽ More
The possibility of utilizing quantum effects to enhance the performance of quantum heat engines has been an active topic of research, but how to enhance the performance by optimizing the engine parameters needs to be further studied. In this study, the temperature difference and dissipation modes affecting the performance of a three-level quantum heat engine were analyzed using an orthogonal test. The results indicated that the dissipation mode dominated the performance of the quantum heat engine. The quantum heat engine performs best when there is only resonance and no detuning; however, when detuning exists, a lower resonance can improve the efficiency by reducing energy losses. Regarding the temperature difference, the best performance was achieved at medium temperature difference owing to the decreasing heat leakage. Finally, the quantum friction caused by the detuning could make the maximal efficiency lower than the Carnot efficiency.
△ Less
Submitted 13 April, 2023; v1 submitted 11 March, 2023;
originally announced March 2023.
-
Wavelength-division multiplexing communications using integrated soliton microcomb laser source
Authors:
Yong Geng,
Yanlan Xiao,
Qingsong Bai,
Xinjie Han,
Wenchan Dong,
Wenting Wang,
Jinggu Xue,
Baicheng Yao,
Guangwei Deng,
Qiang Zhou,
Kun Qiu,
Jing Xu,
Heng Zhou
Abstract:
In this Letter, we investigate the feasibility and performance of wavelength division multiplexed (WDM) optical communications using an integrated dissipative Kerr soliton micro-comb as the multi-channel laser source. First, we confirm that soliton microcomb pumped directly by a DFB laser self-injection locked to the host micro-cavity has sufficiently low frequency and amplitude noises to encode a…
▽ More
In this Letter, we investigate the feasibility and performance of wavelength division multiplexed (WDM) optical communications using an integrated dissipative Kerr soliton micro-comb as the multi-channel laser source. First, we confirm that soliton microcomb pumped directly by a DFB laser self-injection locked to the host micro-cavity has sufficiently low frequency and amplitude noises to encode advanced data formats. Second, perfect soliton crystals are exploited to boost the power level of each microcomb line, so that they can be directly used for data modulation excluding pre-amplification. Third, in a proof-of-concept experiment we demonstrate 7-channel 16-QAM data transmissions using an integrated perfect soliton microcomb as the laser carriers, excellent data receiving performances are obtained under various fiber link distances and amplifier configurations. Our study reveals that fully integrated Kerr soliton microcombs are viable and advantageous for optical data communications.
△ Less
Submitted 1 June, 2022;
originally announced June 2022.
-
Coherent optical communications using coherence-cloned Kerr soliton microcombs
Authors:
Yong Geng,
Heng Zhou,
Wenwen Cui,
Xinjie Han,
Qiang Zhang,
Boyuan Liu,
Guangwei Deng,
Qiang Zhou,
Kun Qiu
Abstract:
Dissipative Kerr soliton microcomb has been recognized as a promising on-chip multi-wavelength laser source for fiber optical communications, as its comb lines possess frequency and phase stability far beyond independent lasers. In the scenarios of coherent optical transmission and interconnect, a highly beneficial but rarely explored target is to re-generate a Kerr soliton microcomb at the receiv…
▽ More
Dissipative Kerr soliton microcomb has been recognized as a promising on-chip multi-wavelength laser source for fiber optical communications, as its comb lines possess frequency and phase stability far beyond independent lasers. In the scenarios of coherent optical transmission and interconnect, a highly beneficial but rarely explored target is to re-generate a Kerr soliton microcomb at the receiver side as local oscillators that conserve the frequency and phase property of the incoming data carriers, so that to enable coherent detection with minimized optical and electrical compensations. Here, by using the techniques of pump laser conveying and two-point locking, we implement re-generation of a Kerr soliton microcomb that faithfully clones the frequency and phase coherence of another microcomb sent from 50 km away. Moreover, leveraging the coherence-cloned soliton microcombs as carriers and local oscillators, we demonstrate terabit coherent data interconnect, wherein traditional digital processes for frequency offset estimation is totally dispensed with, and carrier phase estimation is substantially simplified via slowed-down phase estimation rate per channel and joint phase estimation among multiple channels. Our work reveals that, in addition to providing a multitude of laser tones, regulating the frequency and phase of Kerr soliton microcombs among transmitters and receivers can significantly improve coherent communication in terms of performance, power consumption, and simplicity.
△ Less
Submitted 31 December, 2020;
originally announced January 2021.
-
Mid-infrared spectrally-uncorrelated biphotons generation from doped PPLN: a theoretical investigation
Authors:
Bei Wei,
Wu-Hao Cai,
Chunling Ding,
Guang-Wei Deng,
Ryosuke Shimizu,
Qiang Zhou,
Rui-Bo Jin
Abstract:
We theoretically investigate the preparation of mid-infrared (MIR) spectrally-uncorrelated biphotons from a spontaneous parametric down-conversion process using doped LN crystals, including MgO doped LN, ZnO doped LN, and In2O3 doped ZnLN with doping ratio from 0 to 7 mol%. The tilt angle of the phase-matching function and the corresponding poling period are calculated under type-II, type-I, and t…
▽ More
We theoretically investigate the preparation of mid-infrared (MIR) spectrally-uncorrelated biphotons from a spontaneous parametric down-conversion process using doped LN crystals, including MgO doped LN, ZnO doped LN, and In2O3 doped ZnLN with doping ratio from 0 to 7 mol%. The tilt angle of the phase-matching function and the corresponding poling period are calculated under type-II, type-I, and type-0 phase-matching conditions. We also calculate the thermal properties of the doped LN crystals and their performance in Hong-Ou-Mandel interference. It is found that the doping ratio has a substantial impact on the group-velocity-matching (GVM) wavelengths. Especially, the GVM2 wavelength of co-doped InZnLN crystal has a tunable range of 678.7 nm, which is much broader than the tunable range of less than 100 nm achieved by the conventional method of adjusting the temperature. It can be concluded that the doping ratio can be utilized as a degree of freedom to manipulate the biphoton state. The spectrally uncorrelated biphotons can be used to prepare pure single-photon source and entangled photon source, which may have promising applications for quantum-enhanced sensing, imaging, and communications at the MIR range.
△ Less
Submitted 16 December, 2020;
originally announced December 2020.
-
Perturbation theory for Maxwell's equations in anisotropic materials with shifting boundaries
Authors:
Di Yu,
Xiaomin Lv,
Boyu Fan,
Ju Gao,
Jingdao Tang,
Nan Xu,
You Wang,
Haizhi Song,
Qiang Zhou,
Guangwei Deng
Abstract:
Perturbation theory is a kind of estimation method based on theorem of Taylor expansion, and is useful to investigate electromagnetic solutions of small changes. By considering a sharp boundary as a limit of smoothed systems, previous study has solved the problem when applying standard perturbation theory to Maxwell's equations for small shifts in isotropic dielectric interfaces. However, when dea…
▽ More
Perturbation theory is a kind of estimation method based on theorem of Taylor expansion, and is useful to investigate electromagnetic solutions of small changes. By considering a sharp boundary as a limit of smoothed systems, previous study has solved the problem when applying standard perturbation theory to Maxwell's equations for small shifts in isotropic dielectric interfaces. However, when dealing with anisotropic materials, an approximation is conducted and leads to an unsatisfactory error. Here we develop a modified perturbation theory for small shifts in anisotropically dielectric interfaces. By using optimized smoothing function for each component of permittivity, we obtain a method to calculate the intrinsic frequency shifts of anisotropic permittivity field when boundaries shift, without approximation. Our method shows accurate results when calculating eigenfrequency's shifts in strong-anisotropy materials, and can be widely used for small shifts in anisotropically dielectric interfaces.
△ Less
Submitted 26 November, 2020;
originally announced November 2020.
-
Quantum random number generator based on room-temperature single-photon emitter in gallium nitride
Authors:
Qing Luo,
Zedi Cheng,
Junkai Fan,
Lijuan Tan,
Haizhi Song,
Guangwei Deng,
You Wang,
Qiang Zhou
Abstract:
We experimentally demonstrate a real-time quantum random number generator by using a room-temperature single-photon emitter from the defect in a commercial gallium nitride wafer. Thanks to the brightness of our single photon emitter, the raw bit generation rate is ~1.8 MHz, and the unbiased bit generation rate is ~420 kHz after von Neumann's randomness extraction procedure. Our results show that c…
▽ More
We experimentally demonstrate a real-time quantum random number generator by using a room-temperature single-photon emitter from the defect in a commercial gallium nitride wafer. Thanks to the brightness of our single photon emitter, the raw bit generation rate is ~1.8 MHz, and the unbiased bit generation rate is ~420 kHz after von Neumann's randomness extraction procedure. Our results show that commercial gallium nitride wafer has great potential for the development of integrated high-speed quantum random number generator devices.
△ Less
Submitted 20 March, 2020;
originally announced March 2020.
-
Dispersion independent long-haul photon counting OTDR
Authors:
Bin Li,
Ruiming Zhang,
Yong Wang,
Hao Li,
Lixing You,
Zhonghua Ou,
Heng Zhou,
Yun Ling,
Yunxiang Wang,
Guangwei Deng,
You Wang,
Haizhi Song,
Kun Qiu,
Qiang Zhou
Abstract:
Photon counting optical time-domain reflectometry (PC-OTDR) based on the single photon detection is an effective scheme to attain the high spatial resolution for optical fiber fault monitoring. Currently, due to the spatial resolution of PC-OTDR is proportional to the pulse width of a laser beam, short laser pulses are essential for the high spatial resolution. However, short laser pulses have a l…
▽ More
Photon counting optical time-domain reflectometry (PC-OTDR) based on the single photon detection is an effective scheme to attain the high spatial resolution for optical fiber fault monitoring. Currently, due to the spatial resolution of PC-OTDR is proportional to the pulse width of a laser beam, short laser pulses are essential for the high spatial resolution. However, short laser pulses have a large bandwidth, which would be widened by the dispersion of fiber, thereby causing inevitable deterioration in spatial resolution, especially for long-haul fiber links. In this letter, we propose a scheme of dispersion independent PC-OTDR based on an infinite backscatter technique. Our experimental results -with more than 50 km long fiber - show that the spatial resolution of the PC-OTDR system is independent with the total dispersion of the fiber under test. Our method provides an avenue for developing the long-haul PC-OTDR with high performance.
△ Less
Submitted 28 October, 2019;
originally announced October 2019.
-
High Dynamic Range Externally Time-gated Photon Counting Optical Time-domain Reflectometry
Authors:
Bin Li,
Guangwei Deng,
Ruiming Zhang,
Zhonghua Ou,
Heng Zhou,
Yun Ling,
Yunxiang Wang,
You Wang,
Kun Qiu,
Haizhi Song,
Qiang Zhou
Abstract:
Single photon detector (SPD) has a maximum count rate due to its dead time, which results in that the dynamic range of photon counting optical time-domain reflectometry (PC-OTDR) de-creases with the length of monitored fiber. To further improve the dynamic range of PC-OTDR, we propose and demonstrate an externally time-gated scheme. The externally time-gated scheme is realized by using a high-spee…
▽ More
Single photon detector (SPD) has a maximum count rate due to its dead time, which results in that the dynamic range of photon counting optical time-domain reflectometry (PC-OTDR) de-creases with the length of monitored fiber. To further improve the dynamic range of PC-OTDR, we propose and demonstrate an externally time-gated scheme. The externally time-gated scheme is realized by using a high-speed optical switch, i.e. a Mach-Zehnder interferometer, to modulate the back-propagation optical signal, and to allow that only a certain segment of the fiber is monitored by the SPD. The feasibility of proposed scheme is first examined with theoretical analysis and simulation; then we experimentally demonstrate it with our experimental PC-OTDR testbed operating at 800 nm wavelength band. In our studies, a dynamic range of 30.0 dB is achieved in a 70 meters long PC-OTDR system with 50 ns external gates, corresponding to an improvement of 11.0 dB in dynamic range comparing with no gating operation. Furthermore, with the improved dynamic range, a successful identification of a 0.37 dB loss event is detected with 30-seconds accumulation, which could not be identified without gating operation. Our scheme paves an avenue for developing PC-OTDR systems with high dynamic range.
△ Less
Submitted 21 July, 2019; v1 submitted 11 July, 2019;
originally announced July 2019.
-
Multiplexing Capabilities of Cold-Neutron Triple-Axis Spectrometer SIKA
Authors:
Guochu Deng,
Peter Vorderwisch,
Garry J McIntyre
Abstract:
SIKA, a high-flux cold-neutron triple-axis spectrometer at the OPAL reactor at the Australian Nuclear Science and Technology Organization, is equipped with a 13-blade analyser and position-sensitive detector. This multiplexing design endows SIKA high flexibility to run in both traditional triple-axis and multiplexing analyser modes. In this study, two different multiplexing modes on SIKA are simul…
▽ More
SIKA, a high-flux cold-neutron triple-axis spectrometer at the OPAL reactor at the Australian Nuclear Science and Technology Organization, is equipped with a 13-blade analyser and position-sensitive detector. This multiplexing design endows SIKA high flexibility to run in both traditional triple-axis and multiplexing analyser modes. In this study, two different multiplexing modes on SIKA are simulated using Monte-Carlo ray-tracing methods. The simulation results demonstrate SIKA capabilities to work in these operational modes, especially, the multi-Q const-Ef mode. This capability was demonstrated by measuring the phonon dispersion of a Pb single-crystal sample with the multi-Q const-Ef mode on SIKA. Compared to the traditional and multi-analyser triple-axis spectrometers, multiplexing modes on SIKA combine the advantages of the high data-acquisition efficiency and flexibility to focus on local areas of interest in the (Q, w) space.
△ Less
Submitted 1 February, 2019; v1 submitted 7 January, 2019;
originally announced January 2019.
-
Nuclear probes of an out-of-equilibrium plasma at the highest compression
Authors:
G. Zhang,
M. Huang,
A. Bonasera,
Y. G. Ma,
B. F. Shen,
H. W. Wang,
W. P. Wang,
J. C. Xu,
G. T. Fan,
H. J. Fu,
H. Xue,
H. Zheng,
L. X. Liu,
S. Zhang,
W. J. Li,
X. G. Cao,
X. G. Deng,
X. Y. Li,
Y. C. Liu,
Y. Yu,
Y. Zhang,
C. B. Fu,
X. P. Zhang
Abstract:
We report the highest compression reached in laboratory plasmas using eight laser beams, E$_{laser}$$\approx$12 kJ, $τ_{laser}$=2 ns in third harmonic on a CD$_2$ target at the ShenGuang-II Upgrade (SGII-Up) facility in Shanghai, China. We estimate the deuterium density $ρ_D$= 2.0 $\pm$ 0.9 kg/cm$^{3}$, and the average kinetic energy of the plasma ions less than 1 keV. The highest reached areal de…
▽ More
We report the highest compression reached in laboratory plasmas using eight laser beams, E$_{laser}$$\approx$12 kJ, $τ_{laser}$=2 ns in third harmonic on a CD$_2$ target at the ShenGuang-II Upgrade (SGII-Up) facility in Shanghai, China. We estimate the deuterium density $ρ_D$= 2.0 $\pm$ 0.9 kg/cm$^{3}$, and the average kinetic energy of the plasma ions less than 1 keV. The highest reached areal density $Λρ_{D}$=4.8 $\pm$ 1.5 g/cm$^{2}$ was obtained from the measured ratio of the sequential ternary fusion reactions (dd$\rightarrow$t+p and t+d$\rightarrow$$α$+n) and the two body reaction fusions (dd$\rightarrow$$^3$He+n). At such high densities, sequential ternary and also quaternary nuclear reactions become important as well (i.e. n(14.1 MeV) + $^{12}$C $\rightarrow$ n'+$^{12}$C* etc.) resulting in a shift of the neutron (and proton) kinetic energies from their birth values. The Down Scatter Ratio (DSR-quaternary nuclear reactions) method, i.e. the ratio of the 10-12MeV neutrons divided by the total number of 14.1MeV neutrons produced, confirms the high densities reported above. The estimated lifetime of the highly compressed plasma is 52 $\pm$ 9 ps, much smaller than the lasers pulse duration.
△ Less
Submitted 24 May, 2019; v1 submitted 13 November, 2018;
originally announced December 2018.
-
Proton radiography of magnetic field produced by ultra-intense laser irradiating capacity-coil target
Authors:
W. W. Wang,
J. Teng,
J. Chen,
H. B. Cai,
S. K. He,
W. M. Zhou,
L. Q. Shan,
F. Lu,
Y. C. Wu,
W. Hong,
D. X. Liu,
B. Bi,
F. Zhang,
F. B. Xue,
B. Y. Li,
B. Zhang,
Y. L. He,
W. He,
J. L. Jiao,
K. G. Dong,
F. Q. Zhang,
Z. G. Deng,
Z. M. Zhang,
B. Cui,
D. Han
, et al. (7 additional authors not shown)
Abstract:
Ultra-intense ultra-short laser is firstly used to irradiate the capacity-coil target to generate magnetic field. The spatial structure and temporal evolution of huge magnetic fields were studied with time-gated proton radiography method. A magnetic flux density of 40T was measured by comparing the proton deflection and particle track simulations. Although the laser pulse duration is only 30fs, th…
▽ More
Ultra-intense ultra-short laser is firstly used to irradiate the capacity-coil target to generate magnetic field. The spatial structure and temporal evolution of huge magnetic fields were studied with time-gated proton radiography method. A magnetic flux density of 40T was measured by comparing the proton deflection and particle track simulations. Although the laser pulse duration is only 30fs, the generated magnetic field can last for over 100 picoseconds. The energy conversion efficiency from laser to magnetic field can reach as high as ~20%. The results indicate that tens of tesla (T) magnetic field could be produced in many ultra intense laser facilities around the world, and higher magnetic field could be produced by picosecond lasers.
△ Less
Submitted 17 November, 2014;
originally announced November 2014.
