-
Pinning induced motion and internal flow in neighbouring evaporating multi-component drops
Authors:
Pim J. Dekker,
Marjolein N. van der Linden,
Detlef Lohse
Abstract:
The evaporation of multi-component sessile droplets is key in many physicochemical applications such as inkjet printing, spray cooling, and micro-fabrication. Past fundamental research has primarily concentrated on single drops, though in applications they are rarely isolated. Here, we experimentally explore the effect of neighbouring drops on the evaporation process, employing direct imaging, con…
▽ More
The evaporation of multi-component sessile droplets is key in many physicochemical applications such as inkjet printing, spray cooling, and micro-fabrication. Past fundamental research has primarily concentrated on single drops, though in applications they are rarely isolated. Here, we experimentally explore the effect of neighbouring drops on the evaporation process, employing direct imaging, confocal microscopy, and PTV. Remarkably, the centres of the drops move away from each other rather than towards each other, as we would expect due to the shielding effect at the side of the neighbouring drop and the resulting reduced evaporation on that side. We find that pinning-induced motion mediated by suspended particles in the droplets is the cause of this counter-intuitive behaviour. Finally, the azimuthal dependence of the radial velocity in the drop is compared to the evaporative flux and a perfect agreement is found.
△ Less
Submitted 20 June, 2025; v1 submitted 11 December, 2024;
originally announced December 2024.
-
Evaporating sessile droplets: solutal Marangoni effects overwhelm thermal Marangoni flow
Authors:
Duarte Rocha,
Philip L. Lederer,
Pim J. Dekker,
Alvaro Marin,
Detlef Lohse,
Christian Diddens
Abstract:
When an evaporating water droplet is deposited on a thermally conductive substrate, the minimum temperature will be at the apex due to evaporative cooling. Consequently, density and surface tension gradients emerge within the droplet and at the droplet-gas interface, giving rise to competing flows from, respectively, the apex towards the contact line (thermal-buoyancy-driven flow) and the other wa…
▽ More
When an evaporating water droplet is deposited on a thermally conductive substrate, the minimum temperature will be at the apex due to evaporative cooling. Consequently, density and surface tension gradients emerge within the droplet and at the droplet-gas interface, giving rise to competing flows from, respectively, the apex towards the contact line (thermal-buoyancy-driven flow) and the other way around (thermal Marangoni flow). In small droplets with a diameter below the capillary length, the thermal Marangoni effects are expected to dominate over thermal buoyancy ("thermal Rayleigh") effects. However, contrary to these theoretical predictions, our experiments mostly show a dominant circulation from the apex towards the contact line, indicating a prevailing of thermal Rayleigh convection. Furthermore, our experiments often show an unexpected asymmetric flow that persisted for several minutes. We hypothesise that a tiny amount of contaminants, commonly encountered in experiments with water/air interfaces, act as surfactants and counteract the thermal surface tension gradients at the interface and thereby promote the dominance of Rayleigh convection. Our finite element numerical simulations demonstrate that, under our specified experimental conditions, a mere 0.5% reduction in the static surface tension caused by surfactants leads to a reversal in the flow direction, compared to the theoretical prediction without contaminants. Additionally, we investigate the linear stability of the axisymmetric solutions, revealing that the presence of surfactants also affects the axial symmetry of the flow.
△ Less
Submitted 21 February, 2025; v1 submitted 22 October, 2024;
originally announced October 2024.
-
Non-monotonic surface tension leads to spontaneous symmetry breaking in a binary evaporating drop
Authors:
Christian Diddens,
Pim J. Dekker,
Detlef Lohse
Abstract:
The evaporation of water/1,2-hexanediol binary drops shows remarkable segregation dynamics, with hexanediol-rich spots forming at the rim, thus breaking axisymmetry. While the segregation of hexanediol near the rim can be attributed to the preferential evaporation of water, the symmetry-breaking and spot formation could not yet be successfully explained. With three-dimensional simulations and azim…
▽ More
The evaporation of water/1,2-hexanediol binary drops shows remarkable segregation dynamics, with hexanediol-rich spots forming at the rim, thus breaking axisymmetry. While the segregation of hexanediol near the rim can be attributed to the preferential evaporation of water, the symmetry-breaking and spot formation could not yet be successfully explained. With three-dimensional simulations and azimuthal stability analysis of a minimal model, we investigate the flow and composition in the drop. We show that a slightly non-monotonic surface tension causes the emergence of a counter-rotating Marangoni vortex in the hexanediol-rich rim region, which subsequently becomes azimuthally unstable and forms the observed spots. Accurate measurements reveal that the surface tension is indeed non-monotonic (~0.3 mN/m). This work provides valuable insight for applications like inkjet printing or spray cooling.
△ Less
Submitted 27 February, 2024;
originally announced February 2024.
-
Rapid Viscoelastic Spreading
Authors:
Ambre Bouillant,
Pim J. Dekker,
Michiel A. Hack,
Jacco H. Snoeijer
Abstract:
We investigate the rapid spreading dynamics of a viscoelastic drop on a solid. Upon contact, surface tension drives a fast motion of the contact line along the substrate. Here, we resolve this motion for viscoelastic liquids by experiments on aqueous polymer solutions of varying concentration. It is found that while the contact line motion is only mildly affected by the polymers, the interface pro…
▽ More
We investigate the rapid spreading dynamics of a viscoelastic drop on a solid. Upon contact, surface tension drives a fast motion of the contact line along the substrate. Here, we resolve this motion for viscoelastic liquids by experiments on aqueous polymer solutions of varying concentration. It is found that while the contact line motion is only mildly affected by the polymers, the interface profile becomes much sharper owing to singular polymer stress. This behaviour is reminiscent of that observed for viscoelastic drop coalescence; in this light we revisit the analogy between spreading and coalescence, which sheds new light also on the spreading of Newtonian liquids.
△ Less
Submitted 19 June, 2022;
originally announced June 2022.
-
When elasticity affects drop coalescence
Authors:
Pim J. Dekker,
Michiel A. Hack,
Walter Tewes,
Charu Datt,
Ambre Bouillant,
Jacco H. Snoeijer
Abstract:
The breakup and coalescence of drops are elementary topological transitions in interfacial flows. The breakup of a drop changes dramatically when polymers are added to the fluid. With the strong elongation of the polymers during the process, long threads connecting the two droplets appear prior to their eventual pinch-off. Here, we demonstrate how elasticity affects drop coalescence, the complemen…
▽ More
The breakup and coalescence of drops are elementary topological transitions in interfacial flows. The breakup of a drop changes dramatically when polymers are added to the fluid. With the strong elongation of the polymers during the process, long threads connecting the two droplets appear prior to their eventual pinch-off. Here, we demonstrate how elasticity affects drop coalescence, the complement of the much studied drop pinch-off. We reveal the emergence of an elastic singularity, characterised by a diverging interface curvature at the point of coalescence. Intriguingly, while the polymers dictate the \emph{spatial} features of coalescence, they hardly affect the \emph{temporal} evolution of the bridge. These results are explained using a novel viscoelastic similarity analysis and are relevant for drops created in biofluids, coating sprays and inkjet printing.
△ Less
Submitted 17 July, 2021;
originally announced July 2021.
-
Water Bottle Flipping Physics
Authors:
Pim J. Dekker,
Lumen A. G. Eek,
Mees M. Flapper,
Remco H. J. C. Horstink,
Anne R. Meulenkamp,
Jelle van der Meulen,
Stefan Kooij,
Jacco H. Snoeijer,
Alvaro Marin
Abstract:
The water bottle flipping challenge consists of spinning a bottle, partially filled with water, and making it land upright. It is quite a striking phenomenon, since at first sight it appears rather improbable that a tall rotating bottle could make such a stable landing. Here we analyze the physics behind the water bottle flip, based on experiments and an analytical model that can be used in the cl…
▽ More
The water bottle flipping challenge consists of spinning a bottle, partially filled with water, and making it land upright. It is quite a striking phenomenon, since at first sight it appears rather improbable that a tall rotating bottle could make such a stable landing. Here we analyze the physics behind the water bottle flip, based on experiments and an analytical model that can be used in the classroom. Our measurements show that the angular velocity of the bottle decreases dramatically, enabling a nearly vertical descent and a successful landing. The reduced rotation is due to an increase of the moment of inertia, caused by the in-flight redistribution of the water mass along the bottle. Experimental and analytical results are compared quantitatively, and we demonstrate how to optimize the chances for a successful landing.
△ Less
Submitted 20 September, 2018; v1 submitted 21 December, 2017;
originally announced December 2017.
-
Laser written waveguide photonic quantum circuits
Authors:
G. D. Marshall,
A. Politi,
J. C. F. Matthews,
P. Dekker,
M. Ams,
M. J. Withford,
J. L. O'Brien
Abstract:
We report photonic quantum circuits created using an ultrafast laser processing technique that is rapid, requires no lithographic mask and can be used to create three-dimensional networks of waveguide devices. We have characterized directional couplers--the key functional elements of photonic quantum circuits--and found that they perform as well as lithographically produced waveguide devices. We…
▽ More
We report photonic quantum circuits created using an ultrafast laser processing technique that is rapid, requires no lithographic mask and can be used to create three-dimensional networks of waveguide devices. We have characterized directional couplers--the key functional elements of photonic quantum circuits--and found that they perform as well as lithographically produced waveguide devices. We further demonstrate high-performance interferometers and an important multi-photon quantum interference phenomenon for the first time in integrated optics. This direct-write approach will enable the rapid development of sophisticated quantum optical circuits and their scaling into three-dimensions.
△ Less
Submitted 2 July, 2009; v1 submitted 25 February, 2009;
originally announced February 2009.
-
A 100 mW monolithic Yb waveguide laser fabricated using the femtosecond laser direct-write technique
Authors:
Martin Ams,
Peter Dekker,
Graham D. Marshall,
Michael J. Withford
Abstract:
A femtosecond laser-written monolithic waveguide laser (WGL) oscillator based on a distributed feedback (DFB) architecture and fabricated in ytterbium doped phosphate glass is reported. The device lased at 1033 nm with an output power of 102 mW and a bandwidth less than 2 pm when bidirectionally pumped at 976 nm. The WGL device was stable and operated for 50 hours without degradation. This demon…
▽ More
A femtosecond laser-written monolithic waveguide laser (WGL) oscillator based on a distributed feedback (DFB) architecture and fabricated in ytterbium doped phosphate glass is reported. The device lased at 1033 nm with an output power of 102 mW and a bandwidth less than 2 pm when bidirectionally pumped at 976 nm. The WGL device was stable and operated for 50 hours without degradation. This demonstration of a high performance WGL opens the possibility for creating a variety of narrow-linewidth laser designs in bulk glasses.
△ Less
Submitted 26 September, 2008;
originally announced September 2008.
-
Investigation of ultrafast laser photonic material interactions: challenges for directly written glass photonics
Authors:
M. Ams,
G. D. Marshall,
P. Dekker,
M. Dubov,
V. K. Mezentsev,
I. Bennion,
M. J. Withford
Abstract:
Currently, direct-write waveguide fabrication is probably the most widely studied application of femtosecond laser micromachining in transparent dielectrics. Devices such as buried waveguides, power splitters, couplers, gratings and optical amplifiers have all been demonstrated. Waveguide properties depend critically on the sample material properties and writing laser characteristics. In this pa…
▽ More
Currently, direct-write waveguide fabrication is probably the most widely studied application of femtosecond laser micromachining in transparent dielectrics. Devices such as buried waveguides, power splitters, couplers, gratings and optical amplifiers have all been demonstrated. Waveguide properties depend critically on the sample material properties and writing laser characteristics. In this paper we discuss the challenges facing researchers using the femtosecond laser direct-write technique with specific emphasis being placed on the suitability of fused silica and phosphate glass as device hosts for different applications.
△ Less
Submitted 14 February, 2008;
originally announced February 2008.
-
A Directly-Written Monolithic Waveguide-Laser Incorporating a DFB Waveguide-Bragg Grating
Authors:
Graham D. Marshall,
Peter Dekker,
Martin Ams,
James A. Piper,
Michael J. Withford
Abstract:
We report the fabrication and performance of the first C-band directly-written monolithic waveguide-laser. The waveguide-laser device was created in an Erbium and Ytterbium doped phosphate glass host and consisted of an optical waveguide that included a distributed feedback Bragg grating structure. The femtosecond laser direct-write technique was used to create both the waveguide and the wavegui…
▽ More
We report the fabrication and performance of the first C-band directly-written monolithic waveguide-laser. The waveguide-laser device was created in an Erbium and Ytterbium doped phosphate glass host and consisted of an optical waveguide that included a distributed feedback Bragg grating structure. The femtosecond laser direct-write technique was used to create both the waveguide and the waveguide-Bragg grating simultaneously and in a single processing step. The waveguide-laser was optically pumped at approximately 980 nm and lased at 1537nm with a bandwidth of less than 4 pm.
△ Less
Submitted 8 February, 2008;
originally announced February 2008.
