-
Chip-integrated single-mode coherent-squeezed light source using four-wave mixing in microresonators
Authors:
Patrick Tritschler,
Torsten Ohms,
Christian Schweikert,
Onur Sözen,
Rouven H. Klenk,
Simon Abdani,
Wolfgang Vogel,
Georg Rademacher,
André Zimmermann,
Peter Degenfeld-Schonburg
Abstract:
Squeezed light constitutes a key resource for quantum optical technologies including quantum sensing, computing, communication and metrology. For many applications the generation of squeezed light typically requires at least two nonlinear optical stages involving careful phase and frequency matching to achieve the required mixing of squeezed and coherent light. In our work, we introduce an on-chip…
▽ More
Squeezed light constitutes a key resource for quantum optical technologies including quantum sensing, computing, communication and metrology. For many applications the generation of squeezed light typically requires at least two nonlinear optical stages involving careful phase and frequency matching to achieve the required mixing of squeezed and coherent light. In our work, we introduce an on-chip system that simplifies the generation of coherent-squeezed light, utilizing only a single squeezing stage. We achieve this by pumping a silicon nitride ($\mathrm{Si_3N_4}$) microring resonator to produce single-mode squeezed light through four-wave mixing at the same frequency as the pump mode, leveraging the inherent $χ^{(3)}$-nonlinearity of the $\mathrm{Si_3N_4}$ resonator. Our on-chip system demonstrates a squeezing of -4.7 dB with a clear perspective towards -10 dB squeezing. We also provide a theoretical model that describes the straightforward yet robust generation of single-mode squeezing at the injection locking point of the ring resonator. In fact, we show that a design with a normal dispersion can be used for robust generation of bright squeezed light without the need for careful suppression of unwanted nonlinear processes. Overall, our findings highlight an approach which drastically simplifies the generation of coherent-squeezed light in photonic integrated circuits.
△ Less
Submitted 8 April, 2025; v1 submitted 22 February, 2025;
originally announced February 2025.
-
Nonlinear optical bistability in microring resonators for enhanced phase sensing
Authors:
Patrick Tritschler,
Christian Schweikert,
Rouven H. Klenk,
Simon Abdani,
Onur Sözen,
Wolfgang Vogel,
Georg Rademacher,
Torsten Ohms,
André Zimmermann,
Peter Degenfeld-Schonburg
Abstract:
Photonic microring resonators are used in a variety of chip-integrated sensing applications where they allow one to measure transmission intensity changes upon external signals with a sensitivity that scales linearly with the Q factor. In this work, we suggest exploiting the nonlinear self-phase-modulation effect to increase the overall sensitivity by an additional gain factor appearing when the o…
▽ More
Photonic microring resonators are used in a variety of chip-integrated sensing applications where they allow one to measure transmission intensity changes upon external signals with a sensitivity that scales linearly with the Q factor. In this work, we suggest exploiting the nonlinear self-phase-modulation effect to increase the overall sensitivity by an additional gain factor appearing when the operational point of the nonlinear resonator is chosen just at the crossover from the monostable to the bistable regime. We present the theoretical idea together with a first proof of concept experiment displaying a gain factor of 22 on a chip-integrated silicon-nitride resonator.
△ Less
Submitted 27 March, 2025; v1 submitted 12 August, 2024;
originally announced August 2024.
-
Spontaneous parametric down-conversion induced by optomechanical gradient forces in nanophotonic waveguides
Authors:
Mohamed Ashour,
Jan Niklas Caspers,
Eva M. Weig,
Peter Degenfeld-Schonburg
Abstract:
Optomechanical gradient forces arise from evanescent fields of guided waves in parallel photonic waveguides. When designed to be of attractive nature, they increase exponentially as the gap between the waveguides decreases. Moreover, the amplitude of the gradient force can be well controlled due to its linear dependence on the input laser power. Here, we propose to exploit the intrinsic nonlinear…
▽ More
Optomechanical gradient forces arise from evanescent fields of guided waves in parallel photonic waveguides. When designed to be of attractive nature, they increase exponentially as the gap between the waveguides decreases. Moreover, the amplitude of the gradient force can be well controlled due to its linear dependence on the input laser power. Here, we propose to exploit the intrinsic nonlinear nature of the optomechanical gradient force to induce a tunable 3-wave coupling between the fundamental modes of two doubly clamped nanophotonic beams. For one of the beams having half the width of the other beam, the 1:2 internal resonance between the fundamental modes supports degenerate spontaneous parametric down-conversion (SPDC). We theoretically explore the main feature of the dissipative phase diagram of the underlying degenerate parametric oscillator model to show that the critical point of the SPDC occurs at parameters which are well in reach of state-of-the-art experiments.
△ Less
Submitted 16 February, 2021; v1 submitted 10 February, 2020;
originally announced February 2020.
-
Parametric Amplification of Broadband Vibrational Energy Harvesters for Energy-Autonomous Sensors Enabled by Field-Induced Striction
Authors:
Ulrike Nabholz,
Lukas Lamprecht,
Jan E. Mehner,
André Zimmermann,
Peter Degenfeld-Schonburg
Abstract:
We investigate the influence of parametric excitation on MEMS vibration energy harvesters for energy autonomous sensor systems. In Industry 4.0 (or Industrial IoT) applications, interconnected sensors provide a means of data acquisition for automated control of the manufacturing process. Ensuring a continuous energy supply to the sensors is essential for their reliable operation. Manufacturing mac…
▽ More
We investigate the influence of parametric excitation on MEMS vibration energy harvesters for energy autonomous sensor systems. In Industry 4.0 (or Industrial IoT) applications, interconnected sensors provide a means of data acquisition for automated control of the manufacturing process. Ensuring a continuous energy supply to the sensors is essential for their reliable operation. Manufacturing machines usually display a wide spectrum of vibration frequencies which needs to be covered by an array of harvester substructures in order to maintain the desired output level. We show that mechanical structures designed to implement a Helmholtz-Duffing oscillator have an increased bandwidth by exploiting several orders of parametric resonances. In contrast to concepts implementing parametric amplification in a multi-mode scenario, our concept is based on a single mechanical mode. Therefore, it is more robust against fabrication tolerances as the relevant multi-mode resonance conditions do not need to be matched on the level of single chips. Using exact transient simulations and semi-analytic models to showcase the relation of the Helmholtz-Duffing oscillator to the damped and driven Mathieu equation, we show that parametric resonances highly increase the bandwidth of the output power whenever high Helmholtz nonlinearities are present. To achieve the required nonlinearities, we suggest nonlinear stress-strain curves and we propose to achieve such nonlinearities through field-induced striction by magneto- or electrostriction. Thus, we are able to propose a novel energy harvester concept incorporating strictive materials that exploits the effects of parametric excitation to achieve broadband vibrational energy harvesting.
△ Less
Submitted 6 February, 2020;
originally announced February 2020.
-
Nonlinear Dynamical System Model for Drive Mode Amplitude Instabilities in MEMS Gyroscopes
Authors:
Ulrike Nabholz,
Michael Curcic,
Jan E. Mehner,
Peter Degenfeld-Schonburg
Abstract:
The requirements pertaining to the reliability and accuracy of micro-electromechanical gyroscopic sensors are increasing,as systems for vehicle localization emerge as an enabling factor for autonomous driving. Since micro-electromechanical systems (MEMS) became a mature technology, the modelling techniques used for predicting their behaviour expanded from mostly linear approaches to include nonlin…
▽ More
The requirements pertaining to the reliability and accuracy of micro-electromechanical gyroscopic sensors are increasing,as systems for vehicle localization emerge as an enabling factor for autonomous driving. Since micro-electromechanical systems (MEMS) became a mature technology, the modelling techniques used for predicting their behaviour expanded from mostly linear approaches to include nonlinear dynamic effects. This leads to an increased understanding of the various nonlinear phenomena that limit the performance of MEMS sensors. In this work, we develop a model of two nonlinearly coupled mechanical modes and employ it to explain measured drive mode instabilities in MEMS gyroscopes. Due to 3:1 internal resonance between the drive mode and a parasitic mode, energy transfer within the conservative system occurs. From measurements of amplitude response curves showing hysteresis effects, we extract all nonlinear system parameters and conclude that the steady-state model needs to be expanded by a transient simulation in order to fully explain the measured system behaviour.
△ Less
Submitted 6 February, 2020;
originally announced February 2020.
-
Validating the Critical Point of Spontaneous Parametric Down-Conversion for over 600 Scanning MEMS Micro Mirrors on Wafer-Level
Authors:
Ulrike Nabholz,
Florian Stockmar,
Jan E. Mehner,
Peter Degenfeld-Schonburg
Abstract:
Sensors and actuators based on resonant micro-electro-mechanical systems (MEMS), such as scanning micro mirrors, are well-established in automotive and consumer products. As the areas of application broaden, the requirements for the MEMS are increasing. Devices outside of the performance specifications have to be rejected which is costly due to the high processing times of MEMS technologies. In pa…
▽ More
Sensors and actuators based on resonant micro-electro-mechanical systems (MEMS), such as scanning micro mirrors, are well-established in automotive and consumer products. As the areas of application broaden, the requirements for the MEMS are increasing. Devices outside of the performance specifications have to be rejected which is costly due to the high processing times of MEMS technologies. In particular, nonlinear system behavior is often found to cause unexpected device failure or performance issues. Thus, accurate simulation or rather system models which account for nonlinear sensor dynamics can not only increase process yield, but more importantly, lead to a comprehensive understanding of the underlying physics and to improved MEMS design. We have studied [1] the possibility of a rather drastic device failure induced by nonlinearities on the example of a resonant scanning MEMS micro mirror. On the level of a few selected chips, we have carefully measured the complex nonlinear system behavior and modeled it by a nonlinear mode-coupling phenomenon known as spontaneous parametric down-conversion (SPDC). The most intriguing feature of SPDC is the sudden change from a rather linear to a nonlinear system behavior at the critical oscillation amplitude. However, the threshold only lies within the range of the mirror's operational amplitude, if certain frequency resonance conditions regarding the mechanical modes are met. Thus, the critical amplitude strongly depends on the frequency spectrum of the MEMS design which in turn is largely influenced by fabrication imperfections. We validate the dependence of the critical amplitude on the resonance condition by measuring it for over 600 micro mirrors on wafer-level. Our work does not only validate the theory of SPDC with measurements on such a large scale, but also demonstrates modeling strategies which are essential for MEMS product design.
△ Less
Submitted 6 February, 2020; v1 submitted 26 November, 2019;
originally announced December 2019.
-
Degenerate optomechanical parametric oscillators: cooling in the vicinity of a critical point
Authors:
Peter Degenfeld-Schonburg,
Mehdi Abdi,
Michael J. Hartmann,
Carlos Navarrete-Benlloch
Abstract:
Degenerate optomechanical parametric oscillators are optical resonators in which a mechanical degree of freedom is coupled to a cavity mode that is nonlinearly amplified via parametric down-conversion of an external pumping laser. Below a critical pumping power the down-converted field is purely quantum-mechanical, making the theoretical description of such systems very challenging. Here we introd…
▽ More
Degenerate optomechanical parametric oscillators are optical resonators in which a mechanical degree of freedom is coupled to a cavity mode that is nonlinearly amplified via parametric down-conversion of an external pumping laser. Below a critical pumping power the down-converted field is purely quantum-mechanical, making the theoretical description of such systems very challenging. Here we introduce a theoretical approach that is capable of describing this regime, even at the critical point itself. We find that the down-converted field can induce significant mechanical cooling and identify the process responsible of this as a cooling-by-heating mechanism. Moreover, we show that, contrary to naive expectations and semi-classical predictions, cooling is not optimal at the critical point, where the photon number is largest. Our approach opens the possibility for analyzing further hybrid dissipative quantum systems in the vicinity of critical points.
△ Less
Submitted 16 February, 2016; v1 submitted 21 August, 2015;
originally announced August 2015.
