-
Investigation of Low Frequency Noise in CryoCMOS devices through Statistical Single Defect Spectroscopy
Authors:
Edoardo Catapano,
Anirudh Varanasi,
Philippe Roussel,
Robin Degraeve,
Yusuke Higashi,
Ruben Asanovski,
Ben Kaczer,
Javier Diaz Fortuny,
Michael Waltl,
Valeri Afanasiev,
Kristiaan De Greve,
Alexander Grill
Abstract:
High 1/f noise in CryoCMOS devices is a critical parameter to keep under control in the design of complex circuits for low temperatures applications. Current models predict the 1/f noise to scale linearly with temperature, and gate oxide defects are expected to freeze out at cryogenic temperatures. Nevertheless, it has been repeatedly observed that 1/f noise deviates from the predicted behaviour a…
▽ More
High 1/f noise in CryoCMOS devices is a critical parameter to keep under control in the design of complex circuits for low temperatures applications. Current models predict the 1/f noise to scale linearly with temperature, and gate oxide defects are expected to freeze out at cryogenic temperatures. Nevertheless, it has been repeatedly observed that 1/f noise deviates from the predicted behaviour and that gate oxide defects are still active around 4.2 K, producing random telegraph noise. In this paper, we probe single gate oxide defects in 2500 nMOS devices down to 5 K in order to investigate the origin of 1/f noise in CryoCMOS devices. From our results, it is clear that the number of defects active at cryogenic temperatures resulting in random telegraph noise is larger than at 300 K. Threshold voltage shifts due to charged defects are shown to be exponentially distributed, with different modalities across temperatures and biases: from monomodal at 300 K to trimodal below 100 K. The third mode is interpreted in the framework of percolation theory. By fitting these distributions, it is shown that more than 80% of the detected defects belongs to the oxide bulk. Afterwards, starting from the raw data in time domain, we reconstruct the low frequency noise spectra, highlighting the contributions of defects belonging to different branches and, therefore, to different oxide layers. This analysis shows that, although interface traps and large defects associated with the third mode are the main sources of 1/f noise at 5 K, bulk oxide defects still contribute significantly to low-frequency noise at cryogenic temperatures. Finally, we show that defect time constants and step heights are uncorrelated, proving that elastic tunnelling model for charge trapping is not accurate.
△ Less
Submitted 6 May, 2025;
originally announced May 2025.
-
Radio frequency single electron transmission spectroscopy of a semiconductor Si/SiGe quantum dot
Authors:
I. Fattal,
J. Van Damme,
B. Raes,
C. Godfrin,
G. Jaliel,
K. Chen,
T. Van Caekenberghe,
A. Loenders,
S. Kubicek,
S. Massar,
Y. Canvel,
J. Jussot,
Y. Shimura,
R. Loo,
D. Wan,
M. Mongillo,
K. De Greve
Abstract:
Rapid single shot spin readout is a key ingredient for fault tolerant quantum computing with spin qubits. An RF-SET (radio-frequency single electron transistor) is predominantly used as its the readout timescale is far shorter than the spin decoherence time. In this work, we experimentally demonstrate a transmission-based RF-SET using a multi-module semiconductor-superconductor assembly. A monolit…
▽ More
Rapid single shot spin readout is a key ingredient for fault tolerant quantum computing with spin qubits. An RF-SET (radio-frequency single electron transistor) is predominantly used as its the readout timescale is far shorter than the spin decoherence time. In this work, we experimentally demonstrate a transmission-based RF-SET using a multi-module semiconductor-superconductor assembly. A monolithically integrated SET placed next to a double quantum dot in a Si/SiGe heterostructure is wire-bonded to a superconducting niobium inductor forming the impedance-transforming network. Compared to RF reflectometry, the proposed set-up is experimentally simpler without the need for directional couplers. Read-out performance is benchmarked by the signal-to-noise (SNR) of a dot-reservoir transition (DRT) and an interdot charge transition (ICT) in the double quantum dot near the SET as a function of RF power and integration time. The minimum integration time for unitary SNR is found to be 100 ns for ICT and 300 ns for DRT. The obtained minimum integration times are comparable to the state of the art in conventional RF reflectometry set-ups. Furthermore, we study the turn-on properties of the RF-SET to investigate capacitive shifts and RF losses. Understanding these effects are crucial for further optimisations of the impedance transforming network as well as the device design to assist RF read-out. This new RF read-out scheme also shows promise for multiplexing spin-qubit readout and further studies on rapid charge dynamics in quantum dots.
△ Less
Submitted 7 April, 2025;
originally announced April 2025.
-
Engineering high Pockels coefficients in thin-film strontium titanate for cryogenic quantum electro-optic applications
Authors:
Anja Ulrich,
Kamal Brahim,
Andries Boelen,
Michiel Debaets,
Conglin Sun,
Yishu Huang,
Sandeep Seema Saseendran,
Marina Baryshnikova,
Paola Favia,
Thomas Nuytten,
Stefanie Sergeant,
Kasper Van Gasse,
Bart Kuyken,
Kristiaan De Greve,
Clement Merckling,
Christian Haffner
Abstract:
Materials which exhibit the Pockels effect are notable for their strong electro-optic interaction and rapid response times and are therefore used extensively in classical electro-optic components for data and telecommunication applications. Yet many materials optimized for room-temperature operation see their Pockels coefficients at cryogenic temperatures significantly reduced - a major hurdle for…
▽ More
Materials which exhibit the Pockels effect are notable for their strong electro-optic interaction and rapid response times and are therefore used extensively in classical electro-optic components for data and telecommunication applications. Yet many materials optimized for room-temperature operation see their Pockels coefficients at cryogenic temperatures significantly reduced - a major hurdle for emerging quantum technologies which have even more rigorous demands than their classical counterpart. A noted example is $\mathrm{BaTiO_3}$, which features the strongest effective Pockels coefficient at room temperature, only to see it reduced to a third (i.e. $\mathrm{r_{eff}} \approx$ 170 pm/V) at a few Kelvin. Here, we show that this behaviour is not inherent and can even be reversed: Strontium titanate ($\mathrm{SrTiO_3}$), a material normally not featuring a Pockels coefficient, can be engineered to exhibit an $\mathrm{r_{eff}}$ of 345 pm/V at cryogenic temperatures - a record value in any thin-film electro-optic material. By adjusting the stoichiometry, we can increase the Curie temperature and realise a ferroelectric phase that yields a high Pockels coefficient, yet with limited optical losses - on the order of decibels per centimetre. Our findings position $\mathrm{SrTiO_3}$ as one of the most promising materials for cryogenic quantum photonics applications.
△ Less
Submitted 8 March, 2025; v1 submitted 20 February, 2025;
originally announced February 2025.
-
Argon milling induced decoherence mechanisms in superconducting quantum circuits
Authors:
J. Van Damme,
Ts. Ivanov,
P. Favia,
T. Conard,
J. Verjauw,
R. Acharya,
D. Perez Lozano,
B. Raes,
J. Van de Vondel,
A. M. Vadiraj,
M. Mongillo,
D. Wan,
J. De Boeck,
A. Potočnik,
K. De Greve
Abstract:
The fabrication of superconducting circuits requires multiple deposition, etch and cleaning steps, each possibly introducing material property changes and microscopic defects. In this work, we specifically investigate the process of argon milling, a potentially coherence limiting step, using niobium and aluminum superconducting resonators as a proxy for surface-limited behavior of qubits. We find…
▽ More
The fabrication of superconducting circuits requires multiple deposition, etch and cleaning steps, each possibly introducing material property changes and microscopic defects. In this work, we specifically investigate the process of argon milling, a potentially coherence limiting step, using niobium and aluminum superconducting resonators as a proxy for surface-limited behavior of qubits. We find that niobium microwave resonators exhibit an order of magnitude decrease in quality-factors after surface argon milling, while aluminum resonators are resilient to the same process. Extensive analysis of the niobium surface shows no change in the suboxide composition due to argon milling, while two-tone spectroscopy measurements reveal an increase in two-level system electrical dipole moments, indicating a structurally altered niobium oxide hosting larger two-level system defects. However, a short dry etch can fully recover the argon milling induced losses on niobium, offering a potential route towards state-of-the-art overlap Josephson junction qubits with niobium circuitry.
△ Less
Submitted 7 February, 2023;
originally announced February 2023.
-
Manufacturing high-Q superconducting α-tantalum resonators on silicon wafers
Authors:
D. P. Lozano,
M. Mongillo,
X. Piao,
S. Couet,
D. Wan,
Y. Canvel,
A. M. Vadiraj,
Ts. Ivanov,
J. Verjauw,
R. Acharya,
J. Van Damme,
F. A. Mohiyaddin,
J. Jussot,
P. P. Gowda,
A. Pacco,
B. Raes,
J. Van de Vondel,
I. P. Radu,
B. Govoreanu,
J. Swerts,
A. Potočnik,
K. De Greve
Abstract:
The performance of state-of-the-art superconducting quantum devices is currently limited by microwave dielectric losses at different surfaces and interfaces. α-tantalum is a superconductor that has proven effective in reducing dielectric loss and improving device performance due to its thin low-loss oxide. However, without the use of a seed layer, this tantalum phase has so far only been realised…
▽ More
The performance of state-of-the-art superconducting quantum devices is currently limited by microwave dielectric losses at different surfaces and interfaces. α-tantalum is a superconductor that has proven effective in reducing dielectric loss and improving device performance due to its thin low-loss oxide. However, without the use of a seed layer, this tantalum phase has so far only been realised on sapphire substrates, which is incompatible with advanced processing in industry-scale fabrication facilities. Here, we demonstrate the fabrication of high-quality factor α-tantalum resonators directly on silicon wafers over a variety of metal deposition conditions and perform a comprehensive material and electrical characterization study. By comparing experiments with simulated resonator loss, we demonstrate that two-level-system loss is dominated by surface oxide contributions and not the substrate-metal interface. Our study paves the way to large scale manufacturing of low-loss superconducting circuits and to materials-driven advancements in superconducting circuit performance.
△ Less
Submitted 30 November, 2022; v1 submitted 29 November, 2022;
originally announced November 2022.
-
Overcoming I/O bottleneck in superconducting quantum computing: multiplexed qubit control with ultra-low-power, base-temperature cryo-CMOS multiplexer
Authors:
Rohith Acharya,
Steven Brebels,
Alexander Grill,
Jeroen Verjauw,
Tsvetan Ivanov,
Daniel Perez Lozano,
Danny Wan,
Jacques van Damme,
A. M. Vadiraj,
Massimo Mongillo,
Bogdan Govoreanu,
Jan Craninckx,
I. P. Radu,
Kristiaan de Greve,
Georges Gielen,
Francky Catthoor,
Anton Potočnik
Abstract:
Large-scale superconducting quantum computing systems entail high-fidelity control and readout of large numbers of qubits at millikelvin temperatures, resulting in a massive input-output bottleneck. Cryo-electronics, based on complementary metal-oxide-semiconductor (CMOS) technology, may offer a scalable and versatile solution to overcome this bottleneck. However, detrimental effects due to cross-…
▽ More
Large-scale superconducting quantum computing systems entail high-fidelity control and readout of large numbers of qubits at millikelvin temperatures, resulting in a massive input-output bottleneck. Cryo-electronics, based on complementary metal-oxide-semiconductor (CMOS) technology, may offer a scalable and versatile solution to overcome this bottleneck. However, detrimental effects due to cross-coupling between the electronic and thermal noise generated during cryo-electronics operation and the qubits need to be avoided. Here we present an ultra-low power radio-frequency (RF) multiplexing cryo-electronics solution operating below 15 mK that allows for control and interfacing of superconducting qubits with minimal cross-coupling. We benchmark its performance by interfacing it with a superconducting qubit and observe that the qubit's relaxation times ($T_1$) are unaffected, while the coherence times ($T_2$) are only minimally affected in both static and dynamic operation. Using the multiplexer, single qubit gate fidelities above 99.9%, i.e., well above the threshold for surface-code based quantum error-correction, can be achieved with appropriate thermal filtering. In addition, we demonstrate the capability of time-division-multiplexed qubit control by dynamically windowing calibrated qubit control pulses. Our results show that cryo-CMOS multiplexers could be used to significantly reduce the wiring resources for large-scale qubit device characterization, large-scale quantum processor control and quantum error correction protocols.
△ Less
Submitted 26 September, 2022;
originally announced September 2022.
-
Controlling excitons in an atomically thin membrane with a mirror
Authors:
You Zhou,
Giovanni Scuri,
Jiho Sung,
Ryan J. Gelly,
Dominik S. Wild,
Kristiaan De Greve,
Andrew Y. Joe,
Takashi Taniguchi,
Kenji Watanabe,
Philip Kim,
Mikhail D. Lukin,
Hongkun Park
Abstract:
We demonstrate a new approach for dynamically manipulating the optical response of an atomically thin semiconductor, a monolayer of MoSe2, by suspending it over a metallic mirror. First, we show that suspended van der Waals heterostructures incorporating a MoSe2 monolayer host spatially homogeneous, lifetime-broadened excitons. Then, we interface this nearly ideal excitonic system with a metallic…
▽ More
We demonstrate a new approach for dynamically manipulating the optical response of an atomically thin semiconductor, a monolayer of MoSe2, by suspending it over a metallic mirror. First, we show that suspended van der Waals heterostructures incorporating a MoSe2 monolayer host spatially homogeneous, lifetime-broadened excitons. Then, we interface this nearly ideal excitonic system with a metallic mirror and demonstrate control over the exciton-photon coupling. Specifically, by electromechanically changing the distance between the heterostructure and the mirror, thereby changing the local photonic density of states in a controllable and reversible fashion, we show that both the absorption and emission properties of the excitons can be dynamically modulated. This electromechanical control over exciton dynamics in a mechanically flexible, atomically thin semiconductor opens up new avenues in cavity quantum optomechanics, nonlinear quantum optics, and topological photonics.
△ Less
Submitted 1 December, 2019; v1 submitted 24 January, 2019;
originally announced January 2019.
-
Atomically thin mirrors made of monolayer semiconductors
Authors:
Giovanni Scuri,
You Zhou,
Alexander A. High,
Dominik S. Wild,
Chi Shu,
Kristiaan De Greve,
Luis A. Jauregui,
Takashi Taniguchi,
Kenji Watanabe,
Philip Kim,
Mikhail D. Lukin,
Hongkun Park
Abstract:
Transition metal dichalcogenide monolayers are promising candidates for exploring new electronic and optical phenomena and for realizing atomically thin optoelectronic devices. They host tightly bound electron-hole pairs (excitons) that can be efficiently excited by resonant light fields. Here, we demonstrate that a single monolayer of molybdenum diselenide (MoSe2) can dramatically modify light tr…
▽ More
Transition metal dichalcogenide monolayers are promising candidates for exploring new electronic and optical phenomena and for realizing atomically thin optoelectronic devices. They host tightly bound electron-hole pairs (excitons) that can be efficiently excited by resonant light fields. Here, we demonstrate that a single monolayer of molybdenum diselenide (MoSe2) can dramatically modify light transmission near the excitonic resonance, acting as an electrically switchable mirror that reflects up to 85% of incident light at cryogenic temperatures. This high reflectance is a direct consequence of the excellent coherence properties of excitons in this atomically thin semiconductor, encapsulated by hexagonal boron nitride. Furthermore, we show that the MoSe2 monolayer exhibits power- and wavelength-dependent nonlinearities that stem from exciton-based lattice heating in the case of continuous-wave excitation and exciton-exciton interactions when fast, pulsed laser excitation is used. These observations open up new possibilities for studying quantum nonlinear optical phenomena and topological photonics, and for miniaturizing optical devices.
△ Less
Submitted 19 May, 2017;
originally announced May 2017.
-
Towards Quantum Repeaters with Solid-State Qubits: Spin-Photon Entanglement Generation using Self-Assembled Quantum Dots
Authors:
Peter L. McMahon,
Kristiaan De Greve
Abstract:
In this chapter we review the use of spins in optically-active InAs quantum dots as the key physical building block for constructing a quantum repeater, with a particular focus on recent results demonstrating entanglement between a quantum memory (electron spin qubit) and a flying qubit (polarization- or frequency-encoded photonic qubit). This is a first step towards demonstrating entanglement bet…
▽ More
In this chapter we review the use of spins in optically-active InAs quantum dots as the key physical building block for constructing a quantum repeater, with a particular focus on recent results demonstrating entanglement between a quantum memory (electron spin qubit) and a flying qubit (polarization- or frequency-encoded photonic qubit). This is a first step towards demonstrating entanglement between distant quantum memories (realized with quantum dots), which in turn is a milestone in the roadmap for building a functional quantum repeater. We also place this experimental work in context by providing an overview of quantum repeaters, their potential uses, and the challenges in implementing them.
△ Less
Submitted 14 January, 2015;
originally announced January 2015.
-
Downconversion quantum interface for a single quantum dot spin and 1550-nm single-photon channel
Authors:
Jason S. Pelc,
Leo Yu,
Kristiaan De Greve,
Peter L. McMahon,
Chandra M. Natarajan,
Vahid Esfandyarpour,
Sebastian Maier,
Christian Schneider,
Martin Kamp,
Sven Höfling,
Robert H. Hadfield,
Alfred Forchel,
Yoshihisa Yamamoto,
M. M. Fejer
Abstract:
Long-distance quantum communication networks require appropriate interfaces between matter qubit-based nodes and low-loss photonic quantum channels. We implement a downconversion quantum interface, where the single photons emitted from a semiconductor quantum dot at 910 nm are downconverted to 1560 nm using a fiber-coupled periodically poled lithium niobate waveguide and a 2.2-$μ$m pulsed pump las…
▽ More
Long-distance quantum communication networks require appropriate interfaces between matter qubit-based nodes and low-loss photonic quantum channels. We implement a downconversion quantum interface, where the single photons emitted from a semiconductor quantum dot at 910 nm are downconverted to 1560 nm using a fiber-coupled periodically poled lithium niobate waveguide and a 2.2-$μ$m pulsed pump laser. The single-photon character of the quantum dot emission is preserved during the downconversion process: we measure a cross-correlation $g^{(2)}(τ= 0) = 0.17$ using resonant excitation of the quantum dot. We show that the downconversion interface is fully compatible with coherent optical control of the quantum dot electron spin through the observation of Rabi oscillations in the downconverted photon counts. These results represent a critical step towards a long-distance hybrid quantum network in which subsystems operating at different wavelengths are connected through quantum frequency conversion devices and 1.5-$μ$m quantum channels.
△ Less
Submitted 2 May, 2013; v1 submitted 27 September, 2012;
originally announced September 2012.
