Showing 1–50 of 1,410 results for author: De, M

Effects of One-particle Reduced Density Matrix Optimization in Variational Quantum Eigensolvers

Authors: Amanda Marques de Lima, Erico Souza Teixeira, Eivson Darlivam Rodrigues de Aguiar Silva, Ricardo Luiz Longo

Abstract: The variational quantum eigensolver (VQE) is a promising method for simulating molecular systems on near-term quantum computers. This approach employs energy estimation; however, other relevant molecular properties can be extracted from the one-particle reduced density matrix (1-RDM) generated by VQE. The accuracy of these properties strongly depends on the reliability and convergence of the 1-RDM… ▽ More The variational quantum eigensolver (VQE) is a promising method for simulating molecular systems on near-term quantum computers. This approach employs energy estimation; however, other relevant molecular properties can be extracted from the one-particle reduced density matrix (1-RDM) generated by VQE. The accuracy of these properties strongly depends on the reliability and convergence of the 1-RDM, which is not guaranteed by energy-only optimization. Thus, we investigate the effect of optimizing the 1-RDM within VQE to improve the accuracy of both the energy and molecular properties. A two-step algorithm was implemented that optimizes the energy and 1-RDM by incorporating a penalty term in the cost function to enforce the convergence of the 1-RDM. The first step focuses on energy minimization, while in the second step, a weighted penalty is added to the cost function to promote simultaneous improvement of the energy and 1-RDM. This approach was tested and validated for the k-UpCCGSD and GateFabric ansätzes with active spaces (4,4) and (2,2), respectively. k-UpCCGSD produces energies close to CISD, so optimizing 1-RDM has little effect on the energy but significantly improves electronic properties such as electron density, dipole moments, and atomic charges. GateFabric initially shows higher energy deviations from CISD, but optimizing 1-RDM substantially improves both the energy accuracy and the quality of 1-RDM. These results demonstrate that simultaneous optimization of energy and 1-RDM is an effective strategy to improve the accuracy of energies and molecular properties in variational quantum algorithms. △ Less

Submitted 10 July, 2025; originally announced July 2025.

Comments: 22 pages, 11 figures

Self-Adaptive Stabilization and Quality Boost for Electron Beams from All-Optical Plasma Wakefield Accelerators

Authors: D. Campbell, T. Heinemann, A. Dickson, T. Wilson, L. Berman, M. Cerchez, S. Corde, A. Döpp, A. F. Habib, A. Irman, S. Karsch, A. Martinez de la Ossa, A. Pukhov, L. Reichwein, U. Schramm, A. Sutherland, B. Hidding

Abstract: Shot-to-shot fluctuations in electron beams from laser wakefield accelerators present a significant challenge for applications. Here, we show that instead of using such fluctuating beams directly, employing them to drive a plasma photocathode-based wakefield refinement stage can produce secondary electron beams with greater stability, higher quality, and improved reliability. Our simulation-based… ▽ More Shot-to-shot fluctuations in electron beams from laser wakefield accelerators present a significant challenge for applications. Here, we show that instead of using such fluctuating beams directly, employing them to drive a plasma photocathode-based wakefield refinement stage can produce secondary electron beams with greater stability, higher quality, and improved reliability. Our simulation-based analysis reveals that drive beam jitters are compensated by both the insensitivity of beam-driven plasma wakefield acceleration, and the decoupled physics of plasma photocathode injection. While beam-driven, dephasing-free plasma wakefield acceleration mitigates energy and energy spread fluctuations, intrinsically synchronized plasma photocathode injection compensates charge and current jitters of incoming electron beams, and provides a simultaneous quality boost. Our findings suggest plasma photocathodes are ideal injectors for hybrid laser-plasma wakefield accelerators, and nurture prospects for demanding applications such as free-electron lasers. △ Less

Submitted 9 July, 2025; originally announced July 2025.

Comments: 17 pages, 9 figures. Submitted to Physical Review Research

Experimental Investigation of Optical Processing With Spatial Light Modulation

Authors: Maria Gabriela Damaceno, Antonio Mucherino, Renné Medeiros de Araújo, Paulo Henrique Souto Ribeiro, Nara Rubiano da Silva

Abstract: The growing demand for real-time data processing in applications such as neural networks and embedded control systems has spurred the search for faster, more efficient alternatives to traditional electronic systems. In response, we experimentally investigate an optical processing scheme that encodes information in the transverse wavefront of light fields using spatial light modulators. Our goal is… ▽ More The growing demand for real-time data processing in applications such as neural networks and embedded control systems has spurred the search for faster, more efficient alternatives to traditional electronic systems. In response, we experimentally investigate an optical processing scheme that encodes information in the transverse wavefront of light fields using spatial light modulators. Our goal is to explore the limits on parallelism imposed by technical constraints. We begin by implementing optical an XOR logic gate applied to binary matrices. By analyzing the average error rate in the optical operation between matrices of varying sizes (up to 300 x 300 elements), we analyze the bit depth capacity of the system and the role of information redundancy. Furthermore, we successfully demonstrate image encryption and decryption using a one-time pad protocol for matrices as large as 164 x 164 elements. These findings support the development of a high-dimensional matrix optical processor. △ Less

Submitted 4 July, 2025; originally announced July 2025.

Boosting the NOx production in microwave air plasma: A synergy of chemistry and vibrational kinetics

Authors: Qinghao Shen, Aleksandr Pikalev, Jonas Gans, Lex Kuijpers, Ashley Hughes, Vasco Guerra, M. C. M van de Sanden

Abstract: This study employs a quasi-1.5D multi-temperature model to investigate the mechanisms governing NOx production and energy costs in microwave plasma reactors operating at 80 mbar, focusing on the interplay of vibrational, chemical and electron kinetics, thermodynamics, and transport processes across the discharge and afterglow. In the plasma discharge zone, non-thermal processes enhance NOx product… ▽ More This study employs a quasi-1.5D multi-temperature model to investigate the mechanisms governing NOx production and energy costs in microwave plasma reactors operating at 80 mbar, focusing on the interplay of vibrational, chemical and electron kinetics, thermodynamics, and transport processes across the discharge and afterglow. In the plasma discharge zone, non-thermal processes enhance NOx production as electrons transfer energy effectively to the vibrational mode of N2. However, the non-thermal enhancement is found to diminish rapidly within the central-afterglow region. The simulation results show good agreement with experimental data for both the temperature profile and energy cost. Turbulent effects facilitate radial NO diffusion into cooler regions while simultaneously enhancing cooling of the axial region. These findings highlight the potential to improve NOx synthesis efficiency by optimizing turbulence and maintaining non-thermal conditions, offering new opportunities for the advancement of plasma-based chemical processes. △ Less

Submitted 3 July, 2025; originally announced July 2025.

Comments: 34 pages, 14 figures

Tracking the rotation of light magnetic particles in turbulence

Authors: Chunlai Wu, Rudie P. J. Kunnen, Ziqi Wang, Xander M. de Wit, Federico Toschi, Herman J. H. Clercx

Abstract: Particle-laden turbulence involves complex interactions between the dispersed and continuous phases. Given that particles can exhibit a wide range of properties, such as varying density, size, and shape, their interplay with the flow can lead to various modifications of the turbulence. Therefore, understanding the dynamics of particles is a necessary first step toward revealing the behavior of the… ▽ More Particle-laden turbulence involves complex interactions between the dispersed and continuous phases. Given that particles can exhibit a wide range of properties, such as varying density, size, and shape, their interplay with the flow can lead to various modifications of the turbulence. Therefore, understanding the dynamics of particles is a necessary first step toward revealing the behavior of the multiphase system. Within the context of particle dynamics, accurately resolving rotational motion presents a significantly greater challenge compared to translational motion. We propose an experimental method to track the rotational motion of spherical, light, and magnetic particles with sizes significantly smaller than the Taylor microscale, typically an order of magnitude larger than the Kolmogorov scale of the turbulence in which they are suspended. The method fully resolves all three components of the particle angular velocity using only 2D images acquired from a single camera. This technique enables a detailed investigation of the rotational dynamics of magnetic particles subjected simultaneously to small-scale turbulent structures and external magnetic forcing. Beyond advancing the study of particle dynamics in turbulence, this approach opens new possibilities for actively modulating turbulence through externally applied magnetic fields. △ Less

Submitted 26 June, 2025; originally announced June 2025.

Comments: 17 pages, 12 figures

AI-assisted prediction of catalytically reactive hotspots in nanoalloys

Authors: Jolla Kullgren, Peter Broqvist, Ageo Meier de Andrade, Yunqi Shao, Seungchul Kim, Kwang-Ryeol Lee

Abstract: Nanoalloys offer a unique opportunity to tailor chemical properties through changes in composition, shape, and size. However, this flexibility introduces complexity that challenges both experimental and conventional theoretical methods. In this work, we present an AI-assisted framework for predicting reactive hotspots in nanoalloys. First, we use a Metropolis Monte Carlo method with a lattice-base… ▽ More Nanoalloys offer a unique opportunity to tailor chemical properties through changes in composition, shape, and size. However, this flexibility introduces complexity that challenges both experimental and conventional theoretical methods. In this work, we present an AI-assisted framework for predicting reactive hotspots in nanoalloys. First, we use a Metropolis Monte Carlo method with a lattice-based machine learning potential, trained on 2NN-MEAM data, to rapidly identify thermodynamically stable nanoparticle structures, demonstrated for Pt-Ni homotops. This approach yields core-shell geometries with Ni-rich cores and Pt-enriched surfaces. To predict catalytic activity, we exploit the correlation between reactivity and d-band centers. Rather than relying on costly DFT calculations, we employ a multiscale method using SCC-DFTB and machine learning to efficiently and accurately map d-band centers across a wide range of nanoalloy sizes and compositions. The framework is validated on Pt-Ni nanoparticles of experimental relevance and is readily extendable to other nanoalloy systems. △ Less

Submitted 24 June, 2025; originally announced June 2025.

Comments: 11 pages and 5 pages

Gravitational waves from b-EMRIs: Doppler shift and beaming, resonant excitation, helicity oscillations and self-lensing

Authors: João S. Santos, Vitor Cardoso, José Natário, Maarten van de Meent

Abstract: We study gravitational waves from a stellar-mass binary orbiting a spinning supermassive black hole, a system referred to as a binary extreme mass ratio inspiral (b-EMRI). We use Dixon's formalism to describe the stellar-mass binary as a particle with internal structure, and keep terms up to quadrupole order to capture the generation of gravitational waves by the inner motion of the stellar-mass b… ▽ More We study gravitational waves from a stellar-mass binary orbiting a spinning supermassive black hole, a system referred to as a binary extreme mass ratio inspiral (b-EMRI). We use Dixon's formalism to describe the stellar-mass binary as a particle with internal structure, and keep terms up to quadrupole order to capture the generation of gravitational waves by the inner motion of the stellar-mass binary. The problem of emission and propagation of waves is treated from first principles using black hole perturbation theory. In the gravitational waveform at future null infinity, we identify for the first time Doppler shifts and beaming due to the motion of the center of mass, as well as helicity breaking gravitational lensing, and resonances with ringdown modes of the supermassive black hole. We establish that previously proposed phenomenological models inadequately capture these effects. △ Less

Submitted 25 June, 2025; v1 submitted 17 June, 2025; originally announced June 2025.

Comments: 9+14 pages, 3+3 figures. Matches the version submitted to PRL

Impact of embedded $^{163}$Ho on the performance of the transition-edge sensor microcalorimeters of the HOLMES experiment

Authors: Douglas Bennett, Matteo Borghesi, Pietro Campana, Rodolfo Carobene, Giancarlo Ceruti, Matteo De Gerone, Marco Faverzani, Lorenzo Ferrari Barusso, Elena Ferri, Joseph Fowler, Sara Gamba, Flavio Gatti, Andrea Giachero, Marco Gobbo, Danilo Labranca, Roberto Moretti, Angelo Nucciotti, Luca Origo, Stefano Ragazzi, Dan Schmidt, Daniel Swetz, Joel Ullom

Abstract: We present a detailed investigation of the performance of transition-edge sensor (TES) microcalorimeters with $^{163}$Ho atoms embedded by ion implantation, as part of the HOLMES experiment aimed at neutrino mass determination. The inclusion of $^{163}$Ho atoms introduces an excess heat capacity due to a pronounced Schottky anomaly, which can affect the detector's energy resolution, signal height,… ▽ More We present a detailed investigation of the performance of transition-edge sensor (TES) microcalorimeters with $^{163}$Ho atoms embedded by ion implantation, as part of the HOLMES experiment aimed at neutrino mass determination. The inclusion of $^{163}$Ho atoms introduces an excess heat capacity due to a pronounced Schottky anomaly, which can affect the detector's energy resolution, signal height, and response time. We fabricated TES arrays with varying levels of $^{163}$Ho activity and characterized their performance in terms of energy resolution, decay time constants, and heat capacity. The intrinsic energy resolution was found to degrade with increasing $^{163}$Ho activity, consistent with the expected scaling of heat capacity. From the analysis, we determined the specific heat capacity of $^{163}$Ho to be $(2.9 \pm 0.4 \mathrm{(stat)} \pm 0.7 \mathrm{(sys)})$ J/K/mol at $(94 \pm 1)$\,mK, close to the literature values for metallic holmium. No additional long decay time constants correlated with $^{163}$Ho activity were observed, indicating that the excess heat capacity does not introduce weakly coupled thermodynamic systems. These results suggest that our present TES microcalorimeters can tolerate $^{163}$Ho activities up to approximately 5 Bq without significant performance degradation. For higher activities, reducing the TES transition temperature is necessary to maintain energy resolution. These findings provide critical insights for optimizing TES microcalorimeters for future neutrino mass experiments and other applications requiring embedded radioactive sources. The study also highlights the robustness of TES technology in handling implanted radionuclides while maintaining high-resolution performance. △ Less

Submitted 16 June, 2025; originally announced June 2025.

Runaway electron-induced plasma facing component damage in tokamaks

Authors: S. Ratynskaia, M. Hoelzl, E. Nardon, P. Aleynikov, F. J. Artola, V. Bandaru, M. Beidler, B. Breizman, D. del-Castillo-Negrete, M. De Angeli, V. Dimitriou, R. Ding, J. Eriksson, O. Ficker, R. S. Granetz, E. Hollmann, M. Hoppe, M. Houry, I. Jepu, H. R. Koslowski, C. Liu, J. R. Martin-Solis, G. Pautasso, Y. Peneliau, R. A. Pitts , et al. (9 additional authors not shown)

Abstract: This Roadmap article addresses the critical and multifaceted challenge of plasma-facing component (PFC) damage caused by runaway electrons (REs) in tokamaks, a phenomenon that poses a significant threat to the viability and longevity of future fusion reactors such as ITER and DEMO. The dramatically increased RE production expected in future high-current tokamaks makes it difficult to avoid or miti… ▽ More This Roadmap article addresses the critical and multifaceted challenge of plasma-facing component (PFC) damage caused by runaway electrons (REs) in tokamaks, a phenomenon that poses a significant threat to the viability and longevity of future fusion reactors such as ITER and DEMO. The dramatically increased RE production expected in future high-current tokamaks makes it difficult to avoid or mitigate REs when a plasma discharge terminates abnormally. Preventing damage from the intense localised heat loads REs can cause requires a holistic approach that considers plasma, REs and PFC damage. Despite decades of progress in understanding the physics of REs and the thermomechanical response of PFCs, their complex interplay remains poorly understood. This document aims to initiate a coordinated, interdisciplinary approach to bridge this gap by reviewing experimental evidence, advancing diagnostic capabilities, and improving modelling tools across different scales, dimensionalities and fidelities. Key topics include RE beam formation and transport, damage mechanisms in brittle and metallic PFCs, and observations in major facilities such as JET, DIII-D, WEST and EAST. The Roadmap emphasises the urgency of predictive, high-fidelity modelling validated against well-diagnosed controlled experiments, particularly in the light of recent changes in ITER's wall material strategy and the growing importance of private sector initiatives. Each section of the article is written to provide a concise overview of one area of this multidisciplinary subject, with an assessment of the status, a look at current and future challenges, and a brief summary. The ultimate goal of this initiative is to guide future mitigation strategies and design resilient components that can withstand the loads imposed by REs, thus ensuring the safe and sustainable operation of the next generation of fusion power plants. △ Less

Submitted 12 June, 2025; originally announced June 2025.

Comments: Submitted for publication in the journal Plasma Physics and Controlled Fusion

Repeated ancilla reuse for logical computation on a neutral atom quantum computer

Authors: J. A. Muniz, D. Crow, H. Kim, J. M. Kindem, W. B. Cairncross, A. Ryou, T. C. Bohdanowicz, C. -A. Chen, Y. Ji, A. M. W. Jones, E. Megidish, C. Nishiguchi, M. Urbanek, L. Wadleigh, T. Wilkason, D. Aasen, K. Barnes, J. M. Bello-Rivas, I. Bloomfield, G. Booth, A. Brown, M. O. Brown, K. Cassella, G. Cowan, J. Epstein , et al. (37 additional authors not shown)

Abstract: Quantum processors based on neutral atoms trapped in arrays of optical tweezers have appealing properties, including relatively easy qubit number scaling and the ability to engineer arbitrary gate connectivity with atom movement. However, these platforms are inherently prone to atom loss, and the ability to replace lost atoms during a quantum computation is an important but previously elusive capa… ▽ More Quantum processors based on neutral atoms trapped in arrays of optical tweezers have appealing properties, including relatively easy qubit number scaling and the ability to engineer arbitrary gate connectivity with atom movement. However, these platforms are inherently prone to atom loss, and the ability to replace lost atoms during a quantum computation is an important but previously elusive capability. Here, we demonstrate the ability to measure and re-initialize, and if necessary replace, a subset of atoms while maintaining coherence in other atoms. This allows us to perform logical circuits that include single and two-qubit gates as well as repeated midcircuit measurement while compensating for atom loss. We highlight this capability by performing up to 41 rounds of syndrome extraction in a repetition code, and combine midcircuit measurement and atom replacement with real-time conditional branching to demonstrate heralded state preparation of a logically encoded Bell state. Finally, we demonstrate the ability to replenish atoms in a tweezer array from an atomic beam while maintaining coherence of existing atoms -- a key step towards execution of logical computations that last longer than the lifetime of an atom in the system. △ Less

Submitted 11 June, 2025; originally announced June 2025.

Comments: 15 pages, 10 figures

Latent geometry emerging from network-driven processes

Authors: Andrea Filippo Beretta, Davide Zanchetta, Sebastiano Bontorin, Manlio De Domenico

Abstract: Understanding network functionality requires integrating structure and dynamics, and emergent latent geometry induced by network-driven processes captures the low-dimensional spaces governing this interplay. Here, we focus on generative-model-based approaches, distinguishing two reconstruction classes: fixed-time methods, which infer geometry at specific temporal scales (e.g., equilibrium), and mu… ▽ More Understanding network functionality requires integrating structure and dynamics, and emergent latent geometry induced by network-driven processes captures the low-dimensional spaces governing this interplay. Here, we focus on generative-model-based approaches, distinguishing two reconstruction classes: fixed-time methods, which infer geometry at specific temporal scales (e.g., equilibrium), and multi-scale methods, which integrate dynamics across near- and far-from-equilibrium scales. Over the past decade, these models have revealed functional organization in biological, social, and technological networks. △ Less

Submitted 11 June, 2025; originally announced June 2025.

Efficient broadband terahertz generation by above band-gap excitation of the pyroelectric ZnSnN2

Authors: T. S. Seifert, H. Hempel, O. Gückstock, R. Schneider, Q. Remy, A. Fioretti, T. Unold, S. Michaelis de Vasconcellos, R. Bratschitsch, R. Eichberger, K. Dörr, A. Zakutayev, T. Kampfrath

Abstract: Terahertz (THz) radiation is a powerful probe of low-energy excitations in all phases of matter. However, it remains a challenge to find materials that efficiently generate THz radiation in a broad range of frequencies following optical excitation. Here, we investigate a pyroelectric material, ZnSnN2, and find that above-band-gap excitation results in the efficient formation of an ultrafast photoc… ▽ More Terahertz (THz) radiation is a powerful probe of low-energy excitations in all phases of matter. However, it remains a challenge to find materials that efficiently generate THz radiation in a broad range of frequencies following optical excitation. Here, we investigate a pyroelectric material, ZnSnN2, and find that above-band-gap excitation results in the efficient formation of an ultrafast photocurrent generating THz radiation. The resulting THz electric field spans a frequency range from below 1 to above 30 THz. Our results suggest that the photocurrent is primarily driven by an ultrafast pyroelectric effect where the photo-excited carriers screen the spontaneous electric polarization of ZnSnN2. Strong structural disorder reduces the photocarrier lifetime significantly and, thus, enables broadband operation. ZnSnN2 shows similar THz-emitter performance as the best spintronic THz emitters regarding bandwidth and amplitude. Our study unveils the large potential of pyroelectric materials as efficient and broadband THz emitters with built-in bias fields. △ Less

Submitted 11 June, 2025; originally announced June 2025.

Pendulum Tracker -- SimuFísica: A Web-based Tool for Real-time Measurement of Oscillatory Motion

Authors: Marco P. M. de Souza, Juciane G. Maia, Lilian N. de Andrade

Abstract: We present Pendulum Tracker, a computer vision-based application that enables real-time measurement of the oscillatory motion of a physical pendulum. Integrated into the educational platform SimuFísica, the system uses the OpenCV.js library and runs directly in the browser, working on computers, tablets, and smartphones. The application automatically detects the pendulum's position via the device'… ▽ More We present Pendulum Tracker, a computer vision-based application that enables real-time measurement of the oscillatory motion of a physical pendulum. Integrated into the educational platform SimuFísica, the system uses the OpenCV.js library and runs directly in the browser, working on computers, tablets, and smartphones. The application automatically detects the pendulum's position via the device's camera, displaying in real time the angle-versus-time graph and estimates of the oscillation period. Experimental case studies demonstrate its effectiveness in measuring the period, determining gravitational acceleration, and analyzing damped oscillations. The results show excellent agreement with theoretical predictions, confirming the system's accuracy and its applicability in educational contexts. The accessible interface and the ability to export raw data make Pendulum Tracker a versatile tool for experimental physics teaching. △ Less

Submitted 8 June, 2025; originally announced June 2025.

Measuring the co-evolution of online engagement with (mis)information and its visibility at scale

Authors: Yueting Han, Paolo Turrini, Marya Bazzi, Giulia Andrighetto, Eugenia Polizzi, Manlio De Domenico

Abstract: Online attention is an increasingly valuable resource in the digital age, with extraordinary events such as the COVID-19 pandemic fuelling fierce competition around it. As misinformation pervades online platforms, users seek credible sources, while news outlets compete to attract and retain their attention. Here we measure the co-evolution of online "engagement" with (mis)information and its "visi… ▽ More Online attention is an increasingly valuable resource in the digital age, with extraordinary events such as the COVID-19 pandemic fuelling fierce competition around it. As misinformation pervades online platforms, users seek credible sources, while news outlets compete to attract and retain their attention. Here we measure the co-evolution of online "engagement" with (mis)information and its "visibility", where engagement corresponds to user interactions on social media, and visibility to fluctuations in user follower counts. Using a scalable temporal network modelling framework applied to over 100 million COVID-related retweets spanning 3 years, we find that highly engaged sources experience sharp spikes in follower growth during major events (e.g., vaccine rollouts, epidemic severity), whereas sources with more questionable credibility tend to sustain faster growth outside of these periods. Our framework lends itself to studying other large-scale events where online attention is at stake, such as climate and political debates. △ Less

Submitted 6 June, 2025; originally announced June 2025.

Exploring Heat Exchanges with the Calorimetry Simulator -- SimuFísica

Authors: Marco P. M. de Souza, Alex B. Siqueira

Abstract: This article presents the Calorimetry - SimuFísica simulator, an interactive computational tool designed for teaching heat exchange processes. The simulator enables dynamic and audiovisual exploration of phenomena such as the heating of liquids and the establishment of thermal equilibrium between bodies at different temperatures. We describe its interface and the underlying physics, based on the e… ▽ More This article presents the Calorimetry - SimuFísica simulator, an interactive computational tool designed for teaching heat exchange processes. The simulator enables dynamic and audiovisual exploration of phenomena such as the heating of liquids and the establishment of thermal equilibrium between bodies at different temperatures. We describe its interface and the underlying physics, based on the equations of specific heat, latent heat of vaporization, and Newton's law of cooling. Two educational application examples are analyzed, in which the simulation results are compared with calculations typically performed at the high school and early undergraduate levels, highlighting the consistency between theory and simulation and the pedagogical potential of the tool. △ Less

Submitted 3 June, 2025; originally announced June 2025.

The Bloch Equation Generator -- SimuFísica

Authors: M. P. M. de Souza, G. H. H. Pavão, A. A. C. de Almeida, S. S. Vianna

Abstract: The interaction between multilevel quantum systems and coherent radiation underlies several phenomena in modern atomic optics. The formulation and solution of the Bloch equations, which describe the dynamics of such systems, become complex as the number of levels increases. In this work, we present the Bloch Equation Generator, a free, browser-based computational tool developed to automate the gen… ▽ More The interaction between multilevel quantum systems and coherent radiation underlies several phenomena in modern atomic optics. The formulation and solution of the Bloch equations, which describe the dynamics of such systems, become complex as the number of levels increases. In this work, we present the Bloch Equation Generator, a free, browser-based computational tool developed to automate the generation and numerical solution of Bloch equations for systems with up to 30 levels. Users can configure the level diagram, select allowed transitions, define decay rates, and choose whether or not to apply the rotating wave approximation. The software automatically generates the complete set of equations and provides C source code for numerical solutions in both the time and frequency domains. To illustrate its applicability, we present three examples: (i) a two-level system, (ii) a $Λ$-type system with analysis of CPT, EIT, and the Autler-Townes effect, and (iii) a realistic 12-level system based on the Zeeman-resolved $5S_{1/2} \to 5P_{3/2}$ transition of rubidium-87. △ Less

Submitted 1 June, 2025; originally announced June 2025.

Synchronization of identical oscillators on a sphere: exact results with external forces and higher-order interactions

Authors: Guilherme S. Costa, Marcel Novaes, Ricardo Fariello, Marcus A. M. de Aguiar

Abstract: We study the dynamics of the Kuramoto model on the sphere under higher-order interactions and an external periodic force. For identical oscillators, we introduce a novel way to incorporate three- and four-body interactions into the dynamics of the order parameter, allowing for a full dimensional reduction of this system. We discuss how such reduction can be implemented in two different ways and ho… ▽ More We study the dynamics of the Kuramoto model on the sphere under higher-order interactions and an external periodic force. For identical oscillators, we introduce a novel way to incorporate three- and four-body interactions into the dynamics of the order parameter, allowing for a full dimensional reduction of this system. We discuss how such reduction can be implemented in two different ways and how they are related. When restricted to the equator, the dynamics is similar to that of the usual Kuramoto model, up to an interesting renormalization of the coupling constants. Outside this plane, the motion reduces to a two-parameter set of periodic orbits. We also locate the bifurcation curves of the system as functions of different parameters. △ Less

Submitted 22 May, 2025; originally announced May 2025.

Comments: 27 pages, 5 figures

Hydrogen peroxide electrogeneration from O2 electroreduction: a review focusing on carbon electrocatalysts and environmental applications

Authors: Aline B. Trench, Caio Machado Fernandes, João Paulo C. Moura, Lanna E. B. Lucchetti, Thays S. Lima, Vanessa S. Antonin, James M. de Almeida, Pedro Autreto, Irma Robles, Artur J. Motheo, Marcos R. V. Lanza, Mauro C. Santos

Abstract: Hydrogen peroxide (H2O2) stands as one of the foremost utilized oxidizing agents in modern times. The established method for its production involves the intricate and costly anthraquinone process. However, a promising alternative pathway is the electrochemical hydrogen peroxide production, accomplished through the oxygen reduction reaction via a 2-electron pathway. This method not only simplifies… ▽ More Hydrogen peroxide (H2O2) stands as one of the foremost utilized oxidizing agents in modern times. The established method for its production involves the intricate and costly anthraquinone process. However, a promising alternative pathway is the electrochemical hydrogen peroxide production, accomplished through the oxygen reduction reaction via a 2-electron pathway. This method not only simplifies the production process but also upholds environmental sustainability, especially when compared to the conventional anthraquinone method. In this review paper, recent works from the literature focusing on the 2-electron oxygen reduction reaction promoted by carbon electrocatalysts are summarized. The practical applications of these materials in the treatment of effluents contaminated with different pollutants (drugs, dyes, pesticides, and herbicides) are presented. Water treatment aiming to address these issues can be achieved through advanced oxidation electrochemical processes such as electro-Fenton, solar-electro-Fenton, and photo-electro-Fenton. These processes are discussed in detail in this work and the possible radicals that degrade the pollutants in each case are highlighted. The review broadens its scope to encompass contemporary computational simulations focused on the 2-electron oxygen reduction reaction, employing different models to describe carbon-based electrocatalysts. Finally, perspectives and future challenges in the area of carbon-based electrocatalysts for H2O2 electrogeneration are discussed. This review paper presents a forward-oriented viewpoint of present innovations and pragmatic implementations, delineating forthcoming challenges and prospects of this ever-evolving field. △ Less

Submitted 22 May, 2025; originally announced May 2025.

Scale-by-scale kinetic energy flux calculations in simulations of rotating convection

Authors: Youri H. Lemm, Xander M. de Wit, Rudie P. J. Kunnen

Abstract: Turbulence is an out-of-equilibrium flow state that is characterised by nonzero net fluxes of kinetic energy between different scales of the flow. These fluxes play a crucial role in the formation of characteristic flow structures in many turbulent flows encountered in nature. However, measuring these energy fluxes in practical settings can be challenging as soon as one moves away from unrestricte… ▽ More Turbulence is an out-of-equilibrium flow state that is characterised by nonzero net fluxes of kinetic energy between different scales of the flow. These fluxes play a crucial role in the formation of characteristic flow structures in many turbulent flows encountered in nature. However, measuring these energy fluxes in practical settings can be challenging as soon as one moves away from unrestricted turbulence in an idealised periodic box. Here, we focus on rotating Rayleigh-Bénard convection, being the canonical model system to study geophysical and astrophysical flows. Owing to the effect of rotation, this flow can yield a split cascade, where part of the energy is transported to smaller scales (direct cascade), while another fraction is transported to larger scales (inverse cascade). We compare two different techniques for measuring these energy fluxes throughout the domain: one based on a spatial filtering approach and an adapted Fourier-based method. We show how one can use these methods to measure the energy flux adequately in the anisotropic, aperiodic domains encountered in rotating convection, even in domains with spatial confinement. Our measurements reveal that in the studied regime, the bulk flow is dominated by the direct cascade, while significant inverse cascading action is observed most strongly near the top and bottom plates, due to the vortex merging of Ekman plumes into larger flow structures. △ Less

Submitted 22 May, 2025; v1 submitted 21 May, 2025; originally announced May 2025.

Comments: 22 pages

Solute mixing in porous media with dispersion and buoyancy

Authors: Marco De Paoli, Guru Sreevanshu Yerragolam, Roberto Verzicco, Detlef Lohse

Abstract: We analyse the process of convective mixing in two-dimensional, homogeneous and isotropic porous media with dispersion. We considered a Rayleigh-Taylor instability in which the presence of a solute produces density differences driving the flow. The effect of dispersion is modelled using an anisotropic Fickian dispersion tensor (Bear, J. Geophys. Res. 1961). In addition to molecular diffusion (… ▽ More We analyse the process of convective mixing in two-dimensional, homogeneous and isotropic porous media with dispersion. We considered a Rayleigh-Taylor instability in which the presence of a solute produces density differences driving the flow. The effect of dispersion is modelled using an anisotropic Fickian dispersion tensor (Bear, J. Geophys. Res. 1961). In addition to molecular diffusion ($D_m^*$), the solute is redistributed by an additional spreading, in longitudinal and transverse flow directions, which is quantified by the coefficients $D_l^*$ and $D_t^*$, respectively, and it is produced by the presence of the pores. The flow is controlled by three dimensionless parameters: the Rayleigh-Darcy number $Ra$, defining the relative strength of convection and diffusion, and the dispersion parameters $r=D_l^*/D_t^*$ and $Δ=D_m^*/D_t^*$. With the aid of numerical Darcy simulations, we investigate the mixing dynamics without and with dispersion. We find that in absence of dispersion ($Δ\to\infty$) the dynamics is self-similar and independent of $Ra$, and the flow evolves following several regimes, which we analyse. Then we analyse the effect of dispersion on the flow evolution for a fixed value of the Rayleigh-Darcy number ($Ra=10^4$). A detailed analysis of the molecular and dispersive components of the mean scalar dissipation reveals a complex interplay between flow structures and solute mixing. The proposed theoretical framework, in combination with pore-scale simulations and bead packs experiments, can be used to validate and improve current dispersion models to obtain more reliable estimates of solute transport and spreading in buoyancy-driven subsurface flows. △ Less

Submitted 8 July, 2025; v1 submitted 16 May, 2025; originally announced May 2025.

Modeling the light response of an optically readout GEM based TPC for the CYGNO experiment

Authors: Fernando Dominques Amaro, Rita Antonietti, Elisabetta Baracchini, Luigi Benussi, Stefano Bianco, Roberto Campagnola, Cesidio Capoccia, Michele Caponero, Gianluca Cavoto, Igor Abritta Costa, Antonio Croce, Emiliano Danè, Melba D'Astolfo, Giorgio Dho, Flaminia Di Giambattista, Emanuele Di Marco, Giulia D'Imperio, Joaquim Marques Ferreira dos Santos, Davide Fiorina, Francesco Iacoangeli, Zahoor Ul Islam, Herman Pessoa Lima Junior, Ernesto Kemp, Francesca Lewis, Giovanni Maccarrone , et al. (34 additional authors not shown)

Abstract: The use of gaseous Time Projection Chambers enables the detection and the detailed study of rare events due to particles interactions with the atoms of the gas with energy releases as low as a few keV. Due to this capability, these instruments are being developed for applications in the field of astroparticle physics, such as the study of dark matter and neutrinos. To readout events occurring in t… ▽ More The use of gaseous Time Projection Chambers enables the detection and the detailed study of rare events due to particles interactions with the atoms of the gas with energy releases as low as a few keV. Due to this capability, these instruments are being developed for applications in the field of astroparticle physics, such as the study of dark matter and neutrinos. To readout events occurring in the sensitive volume with a high granularity, the CYGNO collaboration is developing a solution where the light generated during the avalanche processes occurring in a multiplication stage based on Gas Electron Multiplier (GEM) is read out by optical sensors with very high sensitivity and spatial resolution. To achieve a high light output, gas gain values of the order of $10^5\text{-}10^6$ are needed. Experimentally, a dependence of the detector response on the spatial density of the charge collected in the GEM holes has been observed, indicating a gain-reduction effect likely caused by space-charge buildup within the multiplication channels. This paper presents data collected with a prototype featuring a sensitive volume of about two liters, together with a model developed by the collaboration to describe and predict the gain dependence on charge density. A comparison with experimental data shows that the model accurately reproduces the gain behaviour over nearly one order of magnitude, with a percent-level precision. △ Less

Submitted 9 May, 2025; originally announced May 2025.

Role of defects in atom probe analysis of sol-gel silica

Authors: Gustav Eriksson, Matteo De Tullio, Francesco Carnovale, Giovanni Novi Inverardi, Tommaso Morresi, Jonathan Houard, Marc Ropitaux, Ivan Blum, Emmanuel Cadel, Gianluca Lattanzi, Mattias Thuvander, Martin Andersson, Mats Hulander, Simone Taioli, Angela Vella

Abstract: Silicon dioxide is a suitable material to encapsulate proteins at room temperature so that they can be analysed at the atomic level using laser-assisted atom probe tomography (La-APT). To achieve this goal, in this study we show that UV and deep UV lasers can achieve a high success rate in La-APT of silica in terms of chemical resolution and three-dimensional image volume, with both lasers providi… ▽ More Silicon dioxide is a suitable material to encapsulate proteins at room temperature so that they can be analysed at the atomic level using laser-assisted atom probe tomography (La-APT). To achieve this goal, in this study we show that UV and deep UV lasers can achieve a high success rate in La-APT of silica in terms of chemical resolution and three-dimensional image volume, with both lasers providing comparable results. Since the La-APT analyses are driven by photon absorption, in order to understand the mechanisms behind the enhanced absorption of UV light, we performed density functional theory calculations to model the electronic and optical properties of amorphous silica matrices generated using a Monte Carlo approach to structural optimisation. In particular, we have investigated the role of various defects introduced during sample preparation, such as substitutional and interstitial carbon, sodium and gallium ions, and hydrogen. Our results show that the presence of defects increases the absorption of silica in the UV and deep-UV range and thus improves the La-APT capabilities of the material. However, due to the low density of free charge carriers resulting from the absorption of laser energy by defects, deviations from the nominal chemical composition and suboptimal chemical resolution may occur, potentially limiting the optimal acquisition of APT mass spectra. △ Less

Submitted 28 June, 2025; v1 submitted 9 May, 2025; originally announced May 2025.

Comments: 44 pages, 19 figures

Mitigating Singlet Exciton Back-Transfer using 2D Spacer Layers for Perovskite-Sensitised Upconversion

Authors: Nicholas P. Sloane, Damon M. de Clercq, Md Arafat Mahmud, Jianghui Zheng, Adrian Mena, Michael P. Nielsen, Anita W. Y. Ho-Baillie, Christopher G. Bailey, Timothy W. Schmidt, Dane R. McCamey

Abstract: Photon upconversion has potential applications in light-emitting diodes, photocatalysis, bio-imaging, microscopy, 3D printing, and photovoltaics. Bulk lead-halide perovskite films have emerged as promising sensitisers for solid-state photon upconversion via triplet-triplet annihilation due to their excellent optoelectronic properties. In this system, a perovskite sensitiser absorbs photons and sub… ▽ More Photon upconversion has potential applications in light-emitting diodes, photocatalysis, bio-imaging, microscopy, 3D printing, and photovoltaics. Bulk lead-halide perovskite films have emerged as promising sensitisers for solid-state photon upconversion via triplet-triplet annihilation due to their excellent optoelectronic properties. In this system, a perovskite sensitiser absorbs photons and subsequently generates triplet excitons in an adjacent emitter material, where triplet-triplet annihilation can occur allowing for the emission of higher energy photons. However, a major loss pathway in perovskite-sensitised upconversion is the back-transfer of singlet excitons from the emitter to the sensitiser via Förster Resonance Energy Transfer. In this investigation we introduce a 2D perovskite spacer layer between the bulk perovskite sensitiser and a rubrene emitter to mitigate back-transfer of singlet excitons from rubrene to the bulk perovskite sensitiser. This modification reveals the inherent balance between efficient triplet exciton transfer across the interface with a potential barrier versus the mitigation of near-field back-transfer by increasing the distance between the sensitiser and singlet excitons in the emitter. Notably, the introduction of this spacer layer enhances the relative upconversion efficiency at lower excitation power densities while also sustaining performance over extended timescales. This work represents significant progress toward the practical applications of perovskite-sensitised photon upconversion. △ Less

Submitted 9 May, 2025; originally announced May 2025.

Cerium doped graphene-based materials towards oxygen reduction reaction catalysis

Authors: Lanna E. B. Lucchetti, Pedro A. S. Autreto, Mauro C. Santos, James M. de Almeida

Abstract: With the global transition towards cleaner energy and sustainable processes, the demand for efficient catalysts, especially for the oxygen reduction reaction, has gained attention from the scientific community. This research work investigates cerium-doped graphene-based materials as catalysts for this process with density functional theory calculations. The electrochemical performance of Ce-doped… ▽ More With the global transition towards cleaner energy and sustainable processes, the demand for efficient catalysts, especially for the oxygen reduction reaction, has gained attention from the scientific community. This research work investigates cerium-doped graphene-based materials as catalysts for this process with density functional theory calculations. The electrochemical performance of Ce-doped graphene was assessed within the computation hydrogen electrode framework. Our findings reveal that Ce doping, especially when synergized with an oxygen atom, shows improved catalytic activity and selectivity. For instance, Ce doping in combination with an oxygen atom, located near a border, can be selective for the 2-electron pathway. Overall, the combination of Ce doping with structural defects and oxygenated functions lowers the reaction free energies for the oxygen reduction compared to pure graphene, and consequently, might improve the catalytic activity. This research sheds light from a computational perspective on Ce-doped carbon materials as a sustainable alternative to traditional costly metal-based catalysts, offering promising prospects for green energy technologies and electrochemical applications. △ Less

Submitted 8 May, 2025; originally announced May 2025.

Direct Bandgap Photoluminescence of GeSn grown on Si(100) substrate by Molecular Beam Epitaxy Growth

Authors: Diandian Zhang, Nirosh M. Eldose, Dinesh Baral, Hryhorii Stanchu, Sudip Acharya, Fernando Maia de Oliveira, Mourad Benamara, Haochen Zhao, Yuping Zeng, Wei Du, Gregory J. Salamo, Shui-Qing Yu

Abstract: Group IV alloys of GeSn have gained significant attention for electronic and optoelectronic applications on a Si platform due to their compatibility with existing CMOS technology, tunable band structure, and potential for a direct bandgap at high Sn concentrations. However, synthesizing Sn-rich GeSn structures remains challenging due to the low solid solubility of Sn in Ge (less than 1%) and the s… ▽ More Group IV alloys of GeSn have gained significant attention for electronic and optoelectronic applications on a Si platform due to their compatibility with existing CMOS technology, tunable band structure, and potential for a direct bandgap at high Sn concentrations. However, synthesizing Sn-rich GeSn structures remains challenging due to the low solid solubility of Sn in Ge (less than 1%) and the substantial lattice mismatch ( about 14%) between Sn and Ge. In this work, we demonstrate the successful growth of high-quality, relaxed GeSn layers with Sn contents of 9.2% and 11.4% on Si(100) substrates via molecular beam epitaxy (MBE). As far as we know, this is the first report of direct bandgap photoluminescence observed from MBE-grown GeSn films without post-growth annealing. Structural characterizations including X-ray diffraction (XRD), secondary ion mass spectrometry (SIMS), and transmission electron microscopy (TEM) confirm uniform Sn incorporation with minimal defect formation. Atomic force microscopy (AFM) reveals smooth surfaces with low roughness. Temperature-dependent photoluminescence (PL) measurements further confirm direct bandgap emission, representing a new stage in the development of MBE-grown GeSn. △ Less

Submitted 6 May, 2025; originally announced May 2025.

Comments: 12 pages,5 figures

Future Circular Collider Feasibility Study Report: Volume 2, Accelerators, Technical Infrastructure and Safety

Authors: M. Benedikt, F. Zimmermann, B. Auchmann, W. Bartmann, J. P. Burnet, C. Carli, A. Chancé, P. Craievich, M. Giovannozzi, C. Grojean, J. Gutleber, K. Hanke, A. Henriques, P. Janot, C. Lourenço, M. Mangano, T. Otto, J. Poole, S. Rajagopalan, T. Raubenheimer, E. Todesco, L. Ulrici, T. Watson, G. Wilkinson, A. Abada , et al. (1439 additional authors not shown)

Abstract: In response to the 2020 Update of the European Strategy for Particle Physics, the Future Circular Collider (FCC) Feasibility Study was launched as an international collaboration hosted by CERN. This report describes the FCC integrated programme, which consists of two stages: an electron-positron collider (FCC-ee) in the first phase, serving as a high-luminosity Higgs, top, and electroweak factory;… ▽ More In response to the 2020 Update of the European Strategy for Particle Physics, the Future Circular Collider (FCC) Feasibility Study was launched as an international collaboration hosted by CERN. This report describes the FCC integrated programme, which consists of two stages: an electron-positron collider (FCC-ee) in the first phase, serving as a high-luminosity Higgs, top, and electroweak factory; followed by a proton-proton collider (FCC-hh) at the energy frontier in the second phase. FCC-ee is designed to operate at four key centre-of-mass energies: the Z pole, the WW production threshold, the ZH production peak, and the top/anti-top production threshold - delivering the highest possible luminosities to four experiments. Over 15 years of operation, FCC-ee will produce more than 6 trillion Z bosons, 200 million WW pairs, nearly 3 million Higgs bosons, and 2 million top anti-top pairs. Precise energy calibration at the Z pole and WW threshold will be achieved through frequent resonant depolarisation of pilot bunches. The sequence of operation modes remains flexible. FCC-hh will operate at a centre-of-mass energy of approximately 85 TeV - nearly an order of magnitude higher than the LHC - and is designed to deliver 5 to 10 times the integrated luminosity of the HL-LHC. Its mass reach for direct discovery extends to several tens of TeV. In addition to proton-proton collisions, FCC-hh is capable of supporting ion-ion, ion-proton, and lepton-hadron collision modes. This second volume of the Feasibility Study Report presents the complete design of the FCC-ee collider, its operation and staging strategy, the full-energy booster and injector complex, required accelerator technologies, safety concepts, and technical infrastructure. It also includes the design of the FCC-hh hadron collider, development of high-field magnets, hadron injector options, and key technical systems for FCC-hh. △ Less

Submitted 25 April, 2025; originally announced May 2025.

Comments: 627 pages. Please address any comment or request to [email protected]

Report number: CERN-FCC-ACC-2025-0004

Future Circular Collider Feasibility Study Report: Volume 3, Civil Engineering, Implementation and Sustainability

Authors: M. Benedikt, F. Zimmermann, B. Auchmann, W. Bartmann, J. P. Burnet, C. Carli, A. Chancé, P. Craievich, M. Giovannozzi, C. Grojean, J. Gutleber, K. Hanke, A. Henriques, P. Janot, C. Lourenço, M. Mangano, T. Otto, J. Poole, S. Rajagopalan, T. Raubenheimer, E. Todesco, L. Ulrici, T. Watson, G. Wilkinson, P. Azzi , et al. (1439 additional authors not shown)

Abstract: Volume 3 of the FCC Feasibility Report presents studies related to civil engineering, the development of a project implementation scenario, and environmental and sustainability aspects. The report details the iterative improvements made to the civil engineering concepts since 2018, taking into account subsurface conditions, accelerator and experiment requirements, and territorial considerations. I… ▽ More Volume 3 of the FCC Feasibility Report presents studies related to civil engineering, the development of a project implementation scenario, and environmental and sustainability aspects. The report details the iterative improvements made to the civil engineering concepts since 2018, taking into account subsurface conditions, accelerator and experiment requirements, and territorial considerations. It outlines a technically feasible and economically viable civil engineering configuration that serves as the baseline for detailed subsurface investigations, construction design, cost estimation, and project implementation planning. Additionally, the report highlights ongoing subsurface investigations in key areas to support the development of an improved 3D subsurface model of the region. The report describes development of the project scenario based on the 'avoid-reduce-compensate' iterative optimisation approach. The reference scenario balances optimal physics performance with territorial compatibility, implementation risks, and costs. Environmental field investigations covering almost 600 hectares of terrain - including numerous urban, economic, social, and technical aspects - confirmed the project's technical feasibility and contributed to the preparation of essential input documents for the formal project authorisation phase. The summary also highlights the initiation of public dialogue as part of the authorisation process. The results of a comprehensive socio-economic impact assessment, which included significant environmental effects, are presented. Even under the most conservative and stringent conditions, a positive benefit-cost ratio for the FCC-ee is obtained. Finally, the report provides a concise summary of the studies conducted to document the current state of the environment. △ Less

Submitted 25 April, 2025; originally announced May 2025.

Comments: 357 pages. Please address any comment or request to [email protected]

Report number: CERN-FCC-ACC-2025-0003

Future Circular Collider Feasibility Study Report: Volume 1, Physics, Experiments, Detectors

Authors: M. Benedikt, F. Zimmermann, B. Auchmann, W. Bartmann, J. P. Burnet, C. Carli, A. Chancé, P. Craievich, M. Giovannozzi, C. Grojean, J. Gutleber, K. Hanke, A. Henriques, P. Janot, C. Lourenço, M. Mangano, T. Otto, J. Poole, S. Rajagopalan, T. Raubenheimer, E. Todesco, L. Ulrici, T. Watson, G. Wilkinson, P. Azzi , et al. (1439 additional authors not shown)

Abstract: Volume 1 of the FCC Feasibility Report presents an overview of the physics case, experimental programme, and detector concepts for the Future Circular Collider (FCC). This volume outlines how FCC would address some of the most profound open questions in particle physics, from precision studies of the Higgs and EW bosons and of the top quark, to the exploration of physics beyond the Standard Model.… ▽ More Volume 1 of the FCC Feasibility Report presents an overview of the physics case, experimental programme, and detector concepts for the Future Circular Collider (FCC). This volume outlines how FCC would address some of the most profound open questions in particle physics, from precision studies of the Higgs and EW bosons and of the top quark, to the exploration of physics beyond the Standard Model. The report reviews the experimental opportunities offered by the staged implementation of FCC, beginning with an electron-positron collider (FCC-ee), operating at several centre-of-mass energies, followed by a hadron collider (FCC-hh). Benchmark examples are given of the expected physics performance, in terms of precision and sensitivity to new phenomena, of each collider stage. Detector requirements and conceptual designs for FCC-ee experiments are discussed, as are the specific demands that the physics programme imposes on the accelerator in the domains of the calibration of the collision energy, and the interface region between the accelerator and the detector. The report also highlights advances in detector, software and computing technologies, as well as the theoretical tools /reconstruction techniques that will enable the precision measurements and discovery potential of the FCC experimental programme. This volume reflects the outcome of a global collaborative effort involving hundreds of scientists and institutions, aided by a dedicated community-building coordination, and provides a targeted assessment of the scientific opportunities and experimental foundations of the FCC programme. △ Less

Submitted 25 April, 2025; originally announced May 2025.

Comments: 290 pages. Please address any comment or request to [email protected]

Report number: CERN-FCC-PHYS-2025-0002

Experimental Investigation of Twist Conservation in Nonlinear Optical Three-Wave Mixing

Authors: Gustavo H. dos Santos, André L. S. Santos Junior, Marcos Gil de Oliveira, Altilano C. Barbosa, Braian Pinheiro da Silva, Nara Rubiano da Silva, Gustavo Cañas, Stephen P. Walborn, Antonio Z. Khoury, Paulo H. Souto Ribeiro

Abstract: We conduct an experimental investigation into the conservation of the twist phase in Twisted Gaussian Schell Model (TGSM) beams during both up- and down-conversion three-wave mixing nonlinear processes. Independently generated TGSM beams, prepared with varying twist parameters, are used to pump and seed the nonlinear interactions. The resulting beams are then analyzed to determine their twist prop… ▽ More We conduct an experimental investigation into the conservation of the twist phase in Twisted Gaussian Schell Model (TGSM) beams during both up- and down-conversion three-wave mixing nonlinear processes. Independently generated TGSM beams, prepared with varying twist parameters, are used to pump and seed the nonlinear interactions. The resulting beams are then analyzed to determine their twist properties. Our findings demonstrate that the twists of the up- and down-converted beams depend on those of the pump and seed beams. Additionally, the results indicate that the twist phase is conserved throughout the process, in qualitative agreement with theoretical predictions. This study is motivated by the increasing potential applications of TGSM beams in various fields. △ Less

Submitted 30 April, 2025; originally announced May 2025.

Comments: 9 pages, 4 figures

Pinpointing energy transfer mechanisms in the quenching process of microwave air plasma

Authors: Q. Shen, A. Pikalev, F. J. J. Peeters, V. Guerra, M. C. M. van de Sanden

Abstract: A time-dependent multi-temperature quenching model at atmospheric pressure, incorporating chemical and vibrational kinetics, is introduced. The model provides insights into the pathways of NOx formation and destruction in the downstream region of a microwave air plasma. The relaxation of the temperatures during the forced cooling trajectory by the wall is modelled. A Continuous Stirred Tank Reacto… ▽ More A time-dependent multi-temperature quenching model at atmospheric pressure, incorporating chemical and vibrational kinetics, is introduced. The model provides insights into the pathways of NOx formation and destruction in the downstream region of a microwave air plasma. The relaxation of the temperatures during the forced cooling trajectory by the wall is modelled. A Continuous Stirred Tank Reactor model and a Plug Flow Reactor model represent the plasma and quenching regions, respectively. For the non-thermal conditions, where gas and vibrational temperatures differ, most reaction rate coefficients, except those obtained from molecular dynamics methods, are determined based on a generalized Fridman-Macheret scheme. The energy transfer channels involved in the quenching process are tracked across different time scales. By varying the gas temperature in the plasma region and the cooling rate, the reaction pathways for the NOx synthesis mechanism are analysed. This research provides a first step for the further advancement and optimisation of plasma reactors for efficient NOx production. △ Less

Submitted 29 April, 2025; originally announced April 2025.

Comments: 38 pages, 20 Figures

Superradiance in dense atomic samples

Authors: I. M de Araújo, H. Sanchez, L. F. Alves da Silva, M. H. Y. Moussa

Abstract: Here we present an approach to the problem of superradiance in dense atomic samples, when dipolar interactions arise between atoms. Our treatment consists of the sequential use of the Holstein-Primakoff and mean-field approximations, from which we derive master equations for the strong and weak couplings of the sample with the reservoir. We find, in both cases, that the radiation emission presents… ▽ More Here we present an approach to the problem of superradiance in dense atomic samples, when dipolar interactions arise between atoms. Our treatment consists of the sequential use of the Holstein-Primakoff and mean-field approximations, from which we derive master equations for the strong and weak couplings of the sample with the reservoir. We find, in both cases, that the radiation emission presents remarkable features, with characteristic emission times much shorter and intensities much higher than those of Dicke superradiance. In particular, for strong sample-reservoir coupling, a whole comb of superpulses occurs within an envelope with the above-mentioned characteristic emission times much shorter and intensities much higher than those of Dicke superradiance. △ Less

Submitted 28 April, 2025; originally announced April 2025.

Comments: 8 figures

Isochronous islands in the two-harmonic standard map

Authors: Michele Mugnaine, Bruno B. Leal, Alfredo M. Ozorio de Almeida, Ricardo L. Viana, Iberê L. Caldas

Abstract: Isochronous islands are regular solutions related to different chains of elliptic points but with the same winding number. These isochronous islands emerge in phase space as a response to multiple resonant perturbations and can be simulated using a simple discrete model called the two-harmonic standard map. We observed three types of isochronous transitions, which can be formed through saddle-node… ▽ More Isochronous islands are regular solutions related to different chains of elliptic points but with the same winding number. These isochronous islands emerge in phase space as a response to multiple resonant perturbations and can be simulated using a simple discrete model called the two-harmonic standard map. We observed three types of isochronous transitions, which can be formed through saddle-node and pitchfork bifurcations. △ Less

Submitted 28 April, 2025; originally announced April 2025.

Future perspectives for $μ^+ \to \mathrm{e}^+ γ$ searches

Authors: Paolo Walter Cattaneo, Giovanni Dal Maso, Matteo De Gerone, Wataru Ootani, Atsushi Oya, Angela Papa, Francesco Renga, Andre Schöning

Abstract: Searches for charged lepton flavor violation in the muon sector stand out among the most sensitive and clean probes for physics beyond the Standard Model. Currently, $μ^+ \to \mathrm{e}^+ γ$ experiments provide the best constraints in this field and, in the coming years, new experiments investigating the processes of $μ^+ \to \mathrm{e^+e^+e^-}$ and $μ\to \mathrm{e}$ conversion in the nuclear fiel… ▽ More Searches for charged lepton flavor violation in the muon sector stand out among the most sensitive and clean probes for physics beyond the Standard Model. Currently, $μ^+ \to \mathrm{e}^+ γ$ experiments provide the best constraints in this field and, in the coming years, new experiments investigating the processes of $μ^+ \to \mathrm{e^+e^+e^-}$ and $μ\to \mathrm{e}$ conversion in the nuclear field are anticipated to surpass them. However, it is essential to maintain comparable sensitivities across all these processes to fully leverage their potential and differentiate between various new physics models if a discovery occurs. In this document, we present ongoing efforts to develop a future experimental program aimed at improving the sensitivity of \megp\ searches by one order of magnitude within the next decade. △ Less

Submitted 26 April, 2025; originally announced April 2025.

Comments: 12 pages, 9 figures, submitted as an input to the 2026 update of the European Strategy for Particle Physics, on behalf of the study group for future mu -> e gamma experiments

The Dirac equation: historical context, comparisons with the Schrödinger and Klein-Gordon equations, and elementary consequences

Authors: Thiago T. Tsutsui, Edilberto O. Silva, Antonio S. M. de Castro, Fabiano M. Andrade

Abstract: This paper offers educational insight into the Dirac equation, examining its historical context and contrasting it with the earlier Schrödinger and Klein-Gordon (KG) equations. The comparison highlights their Lorentz transformation symmetry and potential probabilistic interpretations. We explicitly solve the free-particle dynamics in Dirac's model, revealing the emergence of negative-energy soluti… ▽ More This paper offers educational insight into the Dirac equation, examining its historical context and contrasting it with the earlier Schrödinger and Klein-Gordon (KG) equations. The comparison highlights their Lorentz transformation symmetry and potential probabilistic interpretations. We explicitly solve the free-particle dynamics in Dirac's model, revealing the emergence of negative-energy solutions. This discussion examines the Dirac Sea Hypothesis and explores the solutions' inherent helicity. Additionally, we demonstrate how the Dirac equation accounts for spin and derive the Pauli equation in the non-relativistic limit. The Foldy-Wouthuysen transformation reveals how the equation incorporates spin-orbit interaction and other relativistic effects, ultimately leading to the fine structure of hydrogen. A section on relativistic covariant notation is included to emphasize the invariance of the Dirac equation, along with more refined formulations of both the KG and Dirac equations. Designed for undergraduate students interested in the Dirac equation, this resource provides a historical perspective without being purely theoretical. Our approach underscores the significance of a pedagogical method that combines historical and comparative elements to profoundly understand the role of the Dirac equation in modern physics. △ Less

Submitted 16 April, 2025; originally announced April 2025.

Comments: 23 pages, 7 figures

Novel approach to use the Kelvin Probe method ex-situ for measuring the electron emission yield of insulator materials subjected to electron irradiation

Authors: Alexander Marcello Cavalca de Almeida, Mohamed Belhaj, Sarah Dadouch, Nicolas Fil

Abstract: Measuring the total electron emission yield of dielectric materials remains a challenging task. Indeed, the charge induced by irradiation and electron emission disturbs the measurement. It is therefore important to quantify this charge during the measurement. Using a Kelvin probe allows both the emission yield and the induced charge to be measured. However, this method requires the probe to be pla… ▽ More Measuring the total electron emission yield of dielectric materials remains a challenging task. Indeed, the charge induced by irradiation and electron emission disturbs the measurement. It is therefore important to quantify this charge during the measurement. Using a Kelvin probe allows both the emission yield and the induced charge to be measured. However, this method requires the probe to be placed inside the vacuum chamber, which is often complicated or even impossible. We propose a complete redesign of this method to overcome this issue. A capacitive coupling now allows the potential probe to be placed outside the chamber, in ambient atmosphere. Beyond this major simplification in implementation, we have also introduced several improvements that simplify the measurement protocol and reduce the overall measurement time. The new method was first validated on a metallic sample (Cu), and subsequently applied to a polymer (Kapton). △ Less

Submitted 23 April, 2025; originally announced April 2025.

About the Upstream Contamination

Authors: D. Suárez-Fontanella, A. Cabo Montes de Oca

Abstract: This study investigates the upward transport of waterborne pollutants from a lower container to an upper container through vertically falling water streams. While previous analyses have primarily focused on inclined channels, we extend the theoretical framework to consider vertical configurations. Two distinct cases are examined: (i) a vertical flow within a cylindrical tube, and (ii) a free-falli… ▽ More This study investigates the upward transport of waterborne pollutants from a lower container to an upper container through vertically falling water streams. While previous analyses have primarily focused on inclined channels, we extend the theoretical framework to consider vertical configurations. Two distinct cases are examined: (i) a vertical flow within a cylindrical tube, and (ii) a free-falling water jet. For the first case, we derive an analytical expression for the critical water flux required to prevent the upward migration of particles. In the second case, we establish a relationship among water flux, particle size, and vertical position along the stream, which determines the feasibility of upward particle transport. Our findings reveal a fundamental difference between the two configurations. In the tubular flow case, surface tension has negligible influence on particle motion. In contrast, in the free-fall scenario, upward particle transport is only possible in the presence of surface tension. Moreover, we demonstrate that for any given water flux, there exists a threshold height difference beyond which contamination of the upper container is not possible. Increasing the water flux further inhibits any upward transport of pollutants △ Less

Submitted 16 April, 2025; originally announced April 2025.

Comments: 7 pages, 5 figures. This article has been published in the Revista Cubana de Física

Journal ref: Revista Cubana de Física, 36(1) 2019

Enhancing Radiation Hardness and Granularity in HV-CMOS: The RD50-MPW4 Sensor

Authors: B. Pilsl, T. Bergauer, R. Casanova, H. Handerkas, C. Irmler, U. Kraemer, R. Marco-Hernandez, J. Mazorra de Cos, F. R. Palomo, S. Portschy, S. Powell, P. Sieberer, J. Sonneveld, H. Steininger, E. Vilella, B. Wade, C. Zhang, S. Zhang

Abstract: The latest HV-CMOS pixel sensor developed by the former CERN-RD50-CMOS group, known as the \mpw, demonstrates competitive radiation tolerance, spatial granularity, and timing resolution -- key requirements for future high-energy physics experiments such as the HL-LHC and FCC. Fabricated using a \SI{150}{nm} CMOS process by \emph{LFoundry}, it introduces several improvements over its predecessor, t… ▽ More The latest HV-CMOS pixel sensor developed by the former CERN-RD50-CMOS group, known as the \mpw, demonstrates competitive radiation tolerance, spatial granularity, and timing resolution -- key requirements for future high-energy physics experiments such as the HL-LHC and FCC. Fabricated using a \SI{150}{nm} CMOS process by \emph{LFoundry}, it introduces several improvements over its predecessor, the \emph{RD50-MPW3}, including separated power domains for reduced noise, a new backside biasing scheme, and an enhanced guard ring structure, enabling operation at bias voltages up to \SI{800}{V}. Tests with non-irradiated samples achieved hit detection efficiencies exceeding \SI{99.9}{\%} and a spatial resolution around \SI{16}{μm}. Neutron-irradiated sensors were characterized using IV measurements and test-beam campaigns, confirming the sensor's robustness in high-radiation environments. The results highlight the ability of HV-CMOS technology to restore hit detection efficiency post-irradiation by increasing the applied bias voltage. Details of these measurements and timing performance are presented in this paper. △ Less

Submitted 22 April, 2025; originally announced April 2025.

Comments: Preprint version of Proceedings of VCI 2025

Non-Hermitian wave turbulence

Authors: Xander M. de Wit, Sébastien Galtier, Michel Fruchart, Federico Toschi, Vincenzo Vitelli

Abstract: Wave turbulence describes the long-time statistical behavior of out-of-equilibrium systems composed of weakly interacting waves. Non-Hermitian media ranging from open quantum systems to active materials can sustain wave propagation in so-called $PT$-symmetric states where gain and loss are effectively balanced. Here, we derive the kinetic equations governing wave turbulence in a prototypical non-H… ▽ More Wave turbulence describes the long-time statistical behavior of out-of-equilibrium systems composed of weakly interacting waves. Non-Hermitian media ranging from open quantum systems to active materials can sustain wave propagation in so-called $PT$-symmetric states where gain and loss are effectively balanced. Here, we derive the kinetic equations governing wave turbulence in a prototypical non-Hermitian medium: a three-dimensional fluid with odd viscosity. We calculate its exact anisotropic solution, the so-called Kolmogorov-Zakharov spectrum, and validate the existence of this regime using direct numerical simulations. This non-Hermitian wave turbulence generates a direct cascade that is sustained down to the smallest scales, suppressing the transition to strong turbulence typically observed in rotating fluids and electron magnetohydrodynamics. Beyond odd viscous fluids, this qualitative mechanism applies to any non-linear system of waves where non-Hermitian effects are enhanced at small scales through gradient terms in the dynamical equations, e.g. via odd elastic moduli or other non-reciprocal responses. △ Less

Submitted 21 April, 2025; originally announced April 2025.

AneuPy: An open source Python tool for creating simulation-ready geometries of abdominal aortic aneurysms

Authors: Mario de Lucio, Jacobo Diaz, Alberto de Castro, Luis E. Romera

Abstract: Abdominal aortic aneurysms (AAAs) are localized dilatations of the abdominal aorta that can lead to life-threatening rupture if left untreated. AAAs primarily affect older individuals, with high mortality rates following rupture, so early diagnosis and risk assessment are critical. The geometrical characteristics of an AAA, such as its maximum diameter, asymmetry, and wall thickness, are extremely… ▽ More Abdominal aortic aneurysms (AAAs) are localized dilatations of the abdominal aorta that can lead to life-threatening rupture if left untreated. AAAs primarily affect older individuals, with high mortality rates following rupture, so early diagnosis and risk assessment are critical. The geometrical characteristics of an AAA, such as its maximum diameter, asymmetry, and wall thickness, are extremely significant in biomechanical models for the assessment of rupture risk. Despite the growing use of computational modeling for AAA investigation, there is a notable gap in accessible, open-source software capable of generating simulation-ready geometries for biomechanical and hemodynamic simulations. To address this gap, we introduce \textbf{AneuPy}, an open-source Python-based tool designed to create both idealized and patient-specific AAA geometric models. \textbf{AneuPy} is a fast and automated approach for generating aneurysm geometries from minimal input data, allowing for extensive parameter customization. By automating the creation of simulation-ready geometries for finite element analysis (FEA), computational fluid dynamics (CFD), or fluid-structure interaction (FSI) models, \textbf{AneuPy} can facilitate research in AAA and improve patient-specific risk prediction. △ Less

Submitted 15 May, 2025; v1 submitted 13 March, 2025; originally announced April 2025.

Comments: 14 pages, 5 figures

Bifurcations and Phase Transitions in the Origins of Life

Authors: Ricard Solé, Manlio De Domenico

Abstract: The path toward the emergence of life in our biosphere involved several key events allowing for the persistence, reproduction and evolution of molecular systems. All these processes took place in a given environmental context and required both molecular diversity and the right non-equilibrium conditions to sustain and favour complex self-sustaining molecular networks capable of evolving by natural… ▽ More The path toward the emergence of life in our biosphere involved several key events allowing for the persistence, reproduction and evolution of molecular systems. All these processes took place in a given environmental context and required both molecular diversity and the right non-equilibrium conditions to sustain and favour complex self-sustaining molecular networks capable of evolving by natural selection. Life is a process that departs from non-life in several ways and cannot be reduced to standard chemical reactions. Moreover, achieving higher levels of complexity required the emergence of novelties. How did that happen? Here, we review different case studies associated with the early origins of life in terms of phase transitions and bifurcations, using symmetry breaking and percolation as two central components. We discuss simple models that allow for understanding key steps regarding life origins, such as molecular chirality, the transition to the first replicators and cooperators, the problem of error thresholds and information loss, and the potential for "order for free" as the basis for the emergence of life. △ Less

Submitted 11 April, 2025; originally announced April 2025.

Comments: 19 pages, 5 figures, 3 boxes

Stochastic surfing turbulent vorticity

Authors: Ziqi Wang, Xander M. de Wit, Roberto Benzi, Chunlai Wu, Rudie P. J. Kunnen, Herman J. H. Clercx, Federico Toschi

Abstract: The chaotic dynamics of small-scale vorticity plays a key role in understanding and controlling turbulence, with direct implications for energy transfer, mixing, and coherent structure evolution. However, measuring or controlling its dynamics remains a major conceptual and experimental challenge due to its transient and chaotic nature. Here we use a combination of experiments, theory and simulatio… ▽ More The chaotic dynamics of small-scale vorticity plays a key role in understanding and controlling turbulence, with direct implications for energy transfer, mixing, and coherent structure evolution. However, measuring or controlling its dynamics remains a major conceptual and experimental challenge due to its transient and chaotic nature. Here we use a combination of experiments, theory and simulations to show that small magnetic particles of different densities, exploring flow regions of distinct vorticity statistics, can act as effective probes for measuring and forcing turbulence at its smallest scale. The interplay between the magnetic torque, from an externally controllable magnetic field, and hydrodynamic stresses, from small-scale turbulent vorticity, reveals an extremely rich phenomenology. Notably, we present the first observation of stochastic resonance for particles in turbulence: turbulent fluctuations, effectively acting as noise, counterintuitively enhance the particle rotational response to external forcing. We identify a pronounced resonant peak in particle rotational phase-lag when the applied magnetic field matches the characteristic intensity of small-scale vortices. Furthermore, we uncover a novel symmetry-breaking mechanism: an oscillating magnetic field with zero-mean angular velocity remarkably induces net particle rotation in turbulence with zero-mean vorticity, as turbulent fluctuations aid the particle in "surfing" the magnetic field. Our findings offer insights into flexible particle manipulation in complex flows and open up a novel magnetic resonance-based approach for measuring vorticity: magnetic particles as probes emit detectable magnetic fields, enabling turbulence quantification even under optically-inaccessible conditions. △ Less

Submitted 11 April, 2025; originally announced April 2025.

Comments: 8 pages, 5 figures

Transient population dynamics of nanoparticles during pulsed EUV exposures

Authors: M. Chaudhuri, L. C. J. Heijmans, A. M. Yakunin, P. Krainov, D. Astakhov, M. van de Kerkhof

Abstract: The transient population dynamics of charged (postive or negative) and neutral nanoparticles have been investigated in a pulsed Extreme Ultra-Violet (EUV) exposure environment with 3DPIC simulations. At the initial stage of the simulation, all the particles are kept neutral. As the number of EUV pulses increases over time, the population of neutral particle decreases faster at the expense of negat… ▽ More The transient population dynamics of charged (postive or negative) and neutral nanoparticles have been investigated in a pulsed Extreme Ultra-Violet (EUV) exposure environment with 3DPIC simulations. At the initial stage of the simulation, all the particles are kept neutral. As the number of EUV pulses increases over time, the population of neutral particle decreases faster at the expense of negatively charged particle generation outside the beam location. However, a small population (< 1%) of neutral particles become positively charged due to EUV photon interaction within the beam area and remains in steady state over time. The critical pulse numbers have been estimated for different nanometer size particles above which most of the particles outside the beam locations become negatively charged: smaller is the particle size, larger is the critical pulse number. △ Less

Submitted 8 April, 2025; originally announced April 2025.

Threshold-less and Flexibly Tunable Frequency Comb via Floquet Engineering

Authors: Sihan Wang, Cheng Wang, Matthijs H. J. de Jong, Laure Mercier de Lépinay, Jingwei Zhou, Mika A. Sillanpää, Yulong Liu

Abstract: Frequency combs have revolutionized communication, metrology and spectroscopy. Numerous efforts have been dedicated to developing integrated combs, predominantly relying on Pockels or Kerr mechanisms. In this work, we propose and demonstrate a new type of frequency comb-Floquet cavity frequency comb-that does not rely on intrinsic material non-linearity. By periodically modulating the resonance fr… ▽ More Frequency combs have revolutionized communication, metrology and spectroscopy. Numerous efforts have been dedicated to developing integrated combs, predominantly relying on Pockels or Kerr mechanisms. In this work, we propose and demonstrate a new type of frequency comb-Floquet cavity frequency comb-that does not rely on intrinsic material non-linearity. By periodically modulating the resonance frequency of a cavity, a Floquet cavity with multiple equally spaced frequency components is created. The pump tone interacts with the pre-modulated cavity, generating the output frequency comb. This approach offers a flexible tuning range and operates in a threshold-less manner, obviating the need to overcome nonlinear initiation threshold. We implement this on a microwave cavity optomechanical system on-chip. Compared to Kerr optomechanical combs, this approach efficiently generates comb with pump signal far from the cavity's intrinsic frequency, and the power required for detection is reduced by approximately a factor of \(10^6\), providing a promising platform for frequency comb generation. △ Less

Submitted 28 May, 2025; v1 submitted 8 April, 2025; originally announced April 2025.

Comments: 9 pages, 4 figures

The Linear Collider Facility (LCF) at CERN

Authors: H. Abramowicz, E. Adli, F. Alharthi, M. Almanza-Soto, M. M. Altakach, S. Ampudia Castelazo, D. Angal-Kalinin, J. A. Anguiano, R. B. Appleby, O. Apsimon, A. Arbey, O. Arquero, D. Attié, J. L. Avila-Jimenez, H. Baer, Y. Bai, C. Balazs, P. Bambade, T. Barklow, J. Baudot, P. Bechtle, T. Behnke, A. B. Bellerive, S. Belomestnykh, Y. Benhammou , et al. (386 additional authors not shown)

Abstract: In this paper we outline a proposal for a Linear Collider Facility as the next flagship project for CERN. It offers the opportunity for a timely, cost-effective and staged construction of a new collider that will be able to comprehensively map the Higgs boson's properties, including the Higgs field potential, thanks to a large span in centre-of-mass energies and polarised beams. A comprehensive pr… ▽ More In this paper we outline a proposal for a Linear Collider Facility as the next flagship project for CERN. It offers the opportunity for a timely, cost-effective and staged construction of a new collider that will be able to comprehensively map the Higgs boson's properties, including the Higgs field potential, thanks to a large span in centre-of-mass energies and polarised beams. A comprehensive programme to study the Higgs boson and its closest relatives with high precision requires data at centre-of-mass energies from the Z pole to at least 1 TeV. It should include measurements of the Higgs boson in both major production mechanisms, ee -> ZH and ee -> vvH, precision measurements of gauge boson interactions as well as of the W boson, Higgs boson and top-quark masses, measurement of the top-quark Yukawa coupling through ee ->ttH, measurement of the Higgs boson self-coupling through HH production, and precision measurements of the electroweak couplings of the top quark. In addition, ee collisions offer discovery potential for new particles complementary to HL-LHC. △ Less

Submitted 19 June, 2025; v1 submitted 31 March, 2025; originally announced March 2025.

Comments: Submission to the ESPPU, as updated version May 26

Report number: DESY-25-054

Deterministic Bottom-Up Fabrication of Plasmonic Nanostructures on Optical Nanofibers via Blurred Electron Beam Deposition

Authors: Antonio Balena, Marianna D Amato, Muhammad Fayyaz Kashif, Chengjie Ding, Massimo De Vittorio, Ferruccio Pisanello, Alberto Bramati

Abstract: This study introduces a novel method for the deterministic fabrication of metallic nanostructures with controlled geometry and composition on suspended, single mode tapered optical nanofibers (TNFs) using a tailored Blurred Electron Beam Induced Deposition (BEBID) technique. TNFs, owing to their subwavelength diameters and intense evanescent fields, offer a unique platform for enhanced light matte… ▽ More This study introduces a novel method for the deterministic fabrication of metallic nanostructures with controlled geometry and composition on suspended, single mode tapered optical nanofibers (TNFs) using a tailored Blurred Electron Beam Induced Deposition (BEBID) technique. TNFs, owing to their subwavelength diameters and intense evanescent fields, offer a unique platform for enhanced light matter interactions at the nanoscale. However, their mechanical fragility has thus far hindered the integration of plasmonic structures using conventional high energy deposition methods. BEBID addresses this limitation by deliberately defocusing the electron beam to reduce local mechanical stress, minimize vibration, and prevent fiber damage during deposition, thereby enabling the one-step growth of platinum nanopillars with sub 20 nm spatial precision and high structural fidelity directly on suspended TNFs. The fabricated structures were characterized using SEM, EDX, and their optical properties were investigated through broadband scattering spectra and polarization resolved measurements, showing strong agreement with Finite Difference Time Domain (FDTD) simulations. Numerical modeling further reveals that ordered arrays of nanopillars can shape and direct the scattered field along the fiber axis, enabling directional emission. This work establishes BEBID as a versatile bottom up nanofabrication approach for functional photonic architectures on fragile substrates, with direct applications in quantum photonics, nano optics, and on fiber plasmonic sensing. △ Less

Submitted 31 March, 2025; originally announced March 2025.

Comments: 28 pages (First 18 pages are the MAIN TEXT, the others are SUPPLEMENTARY MATERIALS)

Numerical proof-of-concept of a photon, proton, and positron laser-driven source with nanostructured targets

Authors: Marta Galbiati, Kevin Ambrogioni, Leonardo Francesco Claudio Monaco, Maria Sole Galli De Magistris, Davide Orecchia, Francesco Mirani, Alessandro Maffini, Matteo Passoni

Abstract: A source of high-energy photons, ions, and positrons can be attained with the interaction of ultra-intense femtosecond laser pulses with advanced nanostructured targets. We present and characterise a numerical model that mimics the foam deposition process on solid substrates, as it occurs in Double-Layer Target (DLT) manufacturing. The model is integrated into Particle-In-Cell (PIC) simulations in… ▽ More A source of high-energy photons, ions, and positrons can be attained with the interaction of ultra-intense femtosecond laser pulses with advanced nanostructured targets. We present and characterise a numerical model that mimics the foam deposition process on solid substrates, as it occurs in Double-Layer Target (DLT) manufacturing. The model is integrated into Particle-In-Cell (PIC) simulations in full 3D geometry to study electron acceleration, consequent high-energy photon emission, proton acceleration, and pair production with realistic target and laser parameters. We highlight the importance of realistic foam morphology modelling even at high-laser intensity and the need for specific optimisation of target parameters with realistic PIC simulations to improve radiation production efficiency. Our study shows that the DLT could be a compact multi-purpose scheme to achieve high-brightness photons and high-energy protons and to observe and optimise non-linear Breit-Wheeler pair production. △ Less

Submitted 27 March, 2025; originally announced March 2025.

Reproducibility of Large Eddy Simulations for mixing in stirred tank reactors

Authors: Cees Haringa, Ryan Rautenbach, Héctor Maldonado de Léon, Pieter Brorens, Michael Schlüter

Abstract: CFD simulations are widely used to quantify mixing performance of stirred tanks, for various applications in chemical engineering and biotechnology. Due to advances in GPU computing, more and more often these simulations make use of Large Eddy Simulations (LES), which explicitly simulate the dynamics of large-scale turbulence. Although these simulations are fully deterministic and hence theoretica… ▽ More CFD simulations are widely used to quantify mixing performance of stirred tanks, for various applications in chemical engineering and biotechnology. Due to advances in GPU computing, more and more often these simulations make use of Large Eddy Simulations (LES), which explicitly simulate the dynamics of large-scale turbulence. Although these simulations are fully deterministic and hence theoretically reproducible, small numerical variations induced by round-off errors combined with differences in distribution and order of operations in parallel computing lead to separation of trajectories, i.e. different flowfield evolutions and different mixing times between repeat simulations, even on the same architecture. We investigate the impact of repeat simulations on the mixing time distribution observed in a $30 \liter$ stirred vessel with two commercial CFD packages, and compare to experimental variability. While the distribution between simulations and experiments is in very good agreement, we do conclude confidence intervals should be reported for CFD simulations of mixing. △ Less

Submitted 26 March, 2025; originally announced March 2025.

Comments: 9 pages (ex. references), 1 table, 4 figures

MSC Class: 76-10

Design Initiative for a 10 TeV pCM Wakefield Collider

Authors: Spencer Gessner, Jens Osterhoff, Carl A. Lindstrøm, Kevin Cassou, Simone Pagan Griso, Jenny List, Erik Adli, Brian Foster, John Palastro, Elena Donegani, Moses Chung, Mikhail Polyanskiy, Lindsey Gray, Igor Pogorelsky, Gongxiaohui Chen, Gianluca Sarri, Brian Beaudoin, Ferdinand Willeke, David Bruhwiler, Joseph Grames, Yuan Shi, Robert Szafron, Angira Rastogi, Alexander Knetsch, Xueying Lu , et al. (176 additional authors not shown)

Abstract: This document outlines a community-driven Design Study for a 10 TeV pCM Wakefield Accelerator Collider. The 2020 ESPP Report emphasized the need for Advanced Accelerator R\&D, and the 2023 P5 Report calls for the ``delivery of an end-to-end design concept, including cost scales, with self-consistent parameters throughout." This Design Study leverages recent experimental and theoretical progress re… ▽ More This document outlines a community-driven Design Study for a 10 TeV pCM Wakefield Accelerator Collider. The 2020 ESPP Report emphasized the need for Advanced Accelerator R\&D, and the 2023 P5 Report calls for the ``delivery of an end-to-end design concept, including cost scales, with self-consistent parameters throughout." This Design Study leverages recent experimental and theoretical progress resulting from a global R\&D program in order to deliver a unified, 10 TeV Wakefield Collider concept. Wakefield Accelerators provide ultra-high accelerating gradients which enables an upgrade path that will extend the reach of Linear Colliders beyond the electroweak scale. Here, we describe the organization of the Design Study including timeline and deliverables, and we detail the requirements and challenges on the path to a 10 TeV Wakefield Collider. △ Less

Submitted 31 March, 2025; v1 submitted 26 March, 2025; originally announced March 2025.

Comments: Contribution prepared for the 2025 update of the European Strategy for Particle Physics

A Linear Collider Vision for the Future of Particle Physics

Authors: H. Abramowicz, E. Adli, F. Alharthi, M. Almanza-Soto, M. M. Altakach, S Ampudia Castelazo, D. Angal-Kalinin, R. B. Appleby, O. Apsimon, A. Arbey, O. Arquero, A. Aryshev, S. Asai, D. Attié, J. L. Avila-Jimenez, H. Baer, J. A. Bagger, Y. Bai, I. R. Bailey, C. Balazs, T Barklow, J. Baudot, P. Bechtle, T. Behnke, A. B. Bellerive , et al. (391 additional authors not shown)

Abstract: In this paper we review the physics opportunities at linear $e^+e^-$ colliders with a special focus on high centre-of-mass energies and beam polarisation, take a fresh look at the various accelerator technologies available or under development and, for the first time, discuss how a facility first equipped with a technology mature today could be upgraded with technologies of tomorrow to reach much… ▽ More In this paper we review the physics opportunities at linear $e^+e^-$ colliders with a special focus on high centre-of-mass energies and beam polarisation, take a fresh look at the various accelerator technologies available or under development and, for the first time, discuss how a facility first equipped with a technology mature today could be upgraded with technologies of tomorrow to reach much higher energies and/or luminosities. In addition, we will discuss detectors and alternative collider modes, as well as opportunities for beyond-collider experiments and R\&D facilities as part of a linear collider facility (LCF). The material of this paper will support all plans for $e^+e^-$ linear colliders and additional opportunities they offer, independently of technology choice or proposed site, as well as R\&D for advanced accelerator technologies. This joint perspective on the physics goals, early technologies and upgrade strategies has been developed by the LCVision team based on an initial discussion at LCWS2024 in Tokyo and a follow-up at the LCVision Community Event at CERN in January 2025. It heavily builds on decades of achievements of the global linear collider community, in particular in the context of CLIC and ILC. △ Less

Submitted 31 March, 2025; v1 submitted 25 March, 2025; originally announced March 2025.

Comments: Community document for EPPSU, will be updated several times

Most stringent bound on electron neutrino mass obtained with a scalable low temperature microcalorimeter array

Authors: B. K. Alpert, M. Balata, D. T. Becker, D. A. Bennett, M. Borghesi, P. Campana, R. Carobene, M. De Gerone, W. B. Doriese, M. Faverzani, L. Ferrari Barusso, E. Ferri, J. W. Fowler, G. Gallucci, S. Gamba, J. D. Gard, F. Gatti, A. Giachero, M. Gobbo, U. Köster, D. Labranca, M. Lusignoli, P. Manfrinetti, J. A. B. Mates, E. Maugeri , et al. (14 additional authors not shown)

Abstract: The determination of the absolute neutrino mass scale remains a fundamental open question in particle physics, with profound implications for both the Standard Model and cosmology. Direct kinematic measurements, independent of model-dependent assumptions, provide the most robust approach to address this challenge. In this Letter, we present the most stringent upper bound on the effective electron… ▽ More The determination of the absolute neutrino mass scale remains a fundamental open question in particle physics, with profound implications for both the Standard Model and cosmology. Direct kinematic measurements, independent of model-dependent assumptions, provide the most robust approach to address this challenge. In this Letter, we present the most stringent upper bound on the effective electron neutrino mass ever obtained with a calorimetric measurement of the electron capture decay of $^{163}$Ho. The HOLMES experiment employs an array of ion-implanted transition-edge sensor (TES) microcalorimeters, achieving an average energy resolution of 6 eV FWHM with a scalable, multiplexed readout technique. With a total of $7\times10^7$ decay events recorded over two months and a Bayesian statistical analysis, we derive an upper limit of $m_β<27$ eV/c$^2$ at 90% credibility. These results validate the feasibility of $^{163}$Ho calorimetry for next-generation neutrino mass experiments and demonstrate the potential of a scalable TES-based microcalorimetric technique to push the sensitivity of direct neutrino mass measurements beyond the current state of the art. △ Less

Submitted 27 March, 2025; v1 submitted 10 March, 2025; originally announced March 2025.

Comments: 9 pages, 6 figures, for submission to PRL