Showing 1–35 of 35 results for author: Davies, E

Influence of the Deformation of Coronal Mass Ejections on Their In-Situ Fitting with Circular-Cross-Section Flux Rope Models

Authors: Bin Zhuang, Noé Lugaz, Nada Al-Haddad, Charles J. Farrugia, Ute Amerstorfer, Emma E. Davies, Manuela Temmer, Hannah T. Rüdisser, Wenyuan Yu, Tingyu Gou, Réka M. Winslow

Abstract: Understanding the properties, especially the magnetohydrodynamic (MHD) invariants, of coronal mass ejections (CMEs) measured in-situ is key to bridging the CME properties from the Sun to interplanetary space. In order to investigate CMEs from the in-situ measurements that provide a one-dimensional (1-D) cut of the CME parameters over the spacecraft trajectory, various magnetic flux rope (MFR) mode… ▽ More Understanding the properties, especially the magnetohydrodynamic (MHD) invariants, of coronal mass ejections (CMEs) measured in-situ is key to bridging the CME properties from the Sun to interplanetary space. In order to investigate CMEs from the in-situ measurements that provide a one-dimensional (1-D) cut of the CME parameters over the spacecraft trajectory, various magnetic flux rope (MFR) models have been developed, among which the models with a circular cross-section are the most popular and widely used. CMEs are found to be deformed during their propagation in interplanetary space, in which the cross-section may be flattened in the direction of propagation, i.e., to develop an elliptical or even pancake-like shape. We use numerical MHD simulations in 2.5-D to investigate the influence of the CME deformation on the in-situ fitting using two linear force-free MFR models with a circular cross-section, and we focus on the axial and poloidal magnetic fluxes, which are conserved in the ideal MHD frame and simulations. We quantitatively compare the fitted axial and poloidal fluxes with those in simulations. We find that both models underestimate the axial flux compared to that in simulations, and such underestimation depends on the CME deformation. However, the fitting of the poloidal flux is independent of the deformation. We discuss the reasons for the axial flux underestimation and the implication of the CME deformation for the CME in-situ fitting. △ Less

Submitted 28 February, 2025; originally announced March 2025.

Comments: Accepted by Solar Physics

First observations of a geomagnetic superstorm with a sub-L1 monitor

Authors: Eva Weiler, Christian Möstl, Emma E. Davies, Astrid Veronig, Ute V. Amerstorfer, Tanja Amerstorfer, Justin Le Louëdec, Maike Bauer, Noé Lugaz, Veronika Haberle, Hannah T. Rüdisser, Satabdwa Majumdar, Martin Reiss

Abstract: Forecasting the geomagnetic effects of solar coronal mass ejections (CMEs) is currently an unsolved problem. CMEs, responsible for the largest values of the north-south component of the interplanetary magnetic field, are the key driver of intense and extreme geomagnetic activity. Observations of southward interplanetary magnetic fields are currently only accessible directly through in situ measure… ▽ More Forecasting the geomagnetic effects of solar coronal mass ejections (CMEs) is currently an unsolved problem. CMEs, responsible for the largest values of the north-south component of the interplanetary magnetic field, are the key driver of intense and extreme geomagnetic activity. Observations of southward interplanetary magnetic fields are currently only accessible directly through in situ measurements by spacecraft in the solar wind. On 10-12 May 2024, the strongest geomagnetic storm since 2003 took place, caused by five interacting CMEs. We clarify the relationship between the CMEs, their solar source regions, and the resulting signatures at the Sun-Earth L1 point observed by the ACE spacecraft at 1.00 AU. The STEREO-A spacecraft was situated at 0.956 AU and 12.6° west of Earth during the event, serving as a fortuitous sub-L1 monitor providing interplanetary magnetic field measurements of the solar wind. We demonstrate an extension of the prediction lead time, as the shock was observed 2.57 hours earlier at STEREO-A than at L1, consistent with the measured shock speed at L1, 710 km/s, and the radial distance of 0.04 AU. By deriving the geomagnetic indices based on the STEREO-A beacon data, we show that the strength of the geomagnetic storm would have been decently forecasted, with the modeled minimum SYM-H=-478.5 nT, underestimating the observed minimum by only 8%. Our study sets an unprecedented benchmark for future mission design using upstream monitoring for space weather prediction. △ Less

Submitted 20 March, 2025; v1 submitted 19 November, 2024; originally announced November 2024.

Comments: 23 pages, 7 figures, 4 tables, submitted to AGU Space Weather on 18 November 2024, accepted on 6 February 2025, published on 17 March 2025

Flux rope modeling of the 2022 Sep 5 CME observed by Parker Solar Probe and Solar Orbiter from 0.07 to 0.69 au

Authors: Emma E. Davies, Hannah T. Rüdisser, Ute V. Amerstorfer, Christian Möstl, Maike Bauer, Eva Weiler, Tanja Amerstorfer, Satabdwa Majumdar, Phillip Hess, Andreas J. Weiss, Martin A. Reiss, Lucie M. Green, David M. Long, Teresa Nieves-Chinchilla, Domenico Trotta, Timothy S. Horbury, Helen O'Brien, Edward Fauchon-Jones, Jean Morris, Christopher J. Owen, Stuart D. Bale, Justin C. Kasper

Abstract: As both Parker Solar Probe (PSP) and Solar Orbiter (SolO) reach heliocentric distances closer to the Sun, they present an exciting opportunity to study the structure of CMEs in the inner heliosphere. We present an analysis of the global flux rope structure of the 2022 September 5 CME event that impacted PSP at a heliocentric distance of only 0.07 au and SolO at 0.69 au. We compare in situ measurem… ▽ More As both Parker Solar Probe (PSP) and Solar Orbiter (SolO) reach heliocentric distances closer to the Sun, they present an exciting opportunity to study the structure of CMEs in the inner heliosphere. We present an analysis of the global flux rope structure of the 2022 September 5 CME event that impacted PSP at a heliocentric distance of only 0.07 au and SolO at 0.69 au. We compare in situ measurements at PSP and SolO to determine global and local expansion measures, finding a good agreement between magnetic field relationships with heliocentric distance, but significant differences with respect to flux rope size. We use PSP/WISPR images as input to the ELEvoHI model, providing a direct link between remote and in situ observations; we find a large discrepancy between the resulting modeled arrival times, suggesting that the underlying model assumptions may not be suitable when using data obtained close to the Sun, where the drag regime is markedly different in comparison to larger heliocentric distances. Finally, we fit the SolO/MAG and PSP/FIELDS data independently with the 3DCORE model and find that many parameters are consistent between spacecraft, however, challenges are apparent when reconstructing a global 3D structure that aligns with arrival times at PSP and Solar Orbiter, likely due to the large radial and longitudinal separations between spacecraft. From our model results, it is clear the solar wind background speed and drag regime strongly affect the modeled expansion and propagation of CMEs and need to be taken into consideration. △ Less

Submitted 19 July, 2024; v1 submitted 17 May, 2024; originally announced May 2024.

Understanding the effects of spacecraft trajectories through solar coronal mass ejection flux ropes using 3DCOREweb

Authors: Hannah Theresa Rüdisser, Andreas Jeffrey Weiss, Justin Le Louëdec, Ute V. Amerstorfer, Christian Möstl, Emma E. Davies, Helmut Lammer

Abstract: This study investigates the impact of spacecraft positioning and trajectory on in situ signatures of coronal mass ejections (CMEs). Employing the 3DCORE model, a 3D flux rope model that can generate in situ profiles for any given point in space and time, we conduct forward modeling to analyze such signatures for various latitudinal and longitudinal positions, with respect to the flux rope apex, at… ▽ More This study investigates the impact of spacecraft positioning and trajectory on in situ signatures of coronal mass ejections (CMEs). Employing the 3DCORE model, a 3D flux rope model that can generate in situ profiles for any given point in space and time, we conduct forward modeling to analyze such signatures for various latitudinal and longitudinal positions, with respect to the flux rope apex, at 0.8~au. Using this approach, we explore the appearance of the resulting in situ profiles for different flux rope types, with different handedness and inclination angles, for both high and low twist CMEs. Our findings reveal that CMEs exhibit distinct differences in signatures between apex hits and flank encounters, with the latter displaying elongated profiles with reduced rotation. However, constant, non-rotating in situ signatures are only observed for flank encounters of low twist CMEs, suggesting the existence of untwisted magnetic field lines within CME legs. Additionally, our study confirms the unambiguous appearance of different flux rope types in in situ signatures, contributing to the broader understanding and interpretation of observational data. Given the model assumptions, this may refute trajectory effects to be the cause for mismatching flux rope types as identified in solar signatures. While acknowledging limitations inherent in our model, such as the assumption of constant twist and non-deformable torus-like shape, we still draw relevant conclusions within the context of global magnetic field structures of CMEs and the potential for distinguishing flux rope types based on in situ observations. △ Less

Submitted 17 July, 2024; v1 submitted 6 May, 2024; originally announced May 2024.

Comments: Accepted for ApJ 2024 July 15 (submitted 2024 May 3, revised 2024 June 7, revised 2024 July 10) 23 pages, 21 figures, 2 tables

A Survey of Coronal Mass Ejections Measured In Situ by Parker Solar Probe During 2018-2022

Authors: Tarik M. Salman, Teresa Nieves-Chinchilla, Lan K. Jian, Noé Lugaz, Fernando Carcaboso, Emma E. Davies, Yaireska M. Collado-Vega

Abstract: We present a statistical investigation of the radial evolution of 28 interplanetary coronal mass ejections (ICMEs), measured in situ by the Parker Solar Probe (PSP) spacecraft from 2018 October to 2022 August. First, by analyzing the radial distribution of ICME classification based on magnetic hodograms, we find that coherent configurations are more likely to be observed close to the Sun. In contr… ▽ More We present a statistical investigation of the radial evolution of 28 interplanetary coronal mass ejections (ICMEs), measured in situ by the Parker Solar Probe (PSP) spacecraft from 2018 October to 2022 August. First, by analyzing the radial distribution of ICME classification based on magnetic hodograms, we find that coherent configurations are more likely to be observed close to the Sun. In contrast, more complex configurations are observed farther out. We also notice that the post-ICME magnetic field is more impacted following an ICME passage at larger heliocentric distances. Second, with a multi-linear robust regression, we derive a slower magnetic ejecta (ME) expansion rate within 1~au compared to previous statistical estimates. Then, investigating the magnetic field fluctuations within ICME sheaths, we see that these fluctuations are strongly coupled to the relative magnetic field strength gradient from the upstream solar wind to the ME. Third, we identify ME expansion as an important factor in forming sheaths. Finally, we determine the distortion parameter (DiP) which is a measure of magnetic field asymmetry in an ME. We discover lower overall asymmetries within MEs. We reveal that even for expanding MEs, the time duration over which an ME is sampled does not correlate with DiP values, indicating that the aging effect is not the sole contributor to the observed ME asymmetries. △ Less

Submitted 4 March, 2024; originally announced March 2024.

Properties of an interplanetary shock observed at 0.07 and 0.7 Astronomical Units by Parker Solar Probe and Solar Orbiter

Authors: D. Trotta, A. Larosa, G. Nicolaou, T. S. Horbury, L. Matteini, H. Hietala, X. Blanco-Cano, L. Franci, C. H. K. Chen, L. Zhao, G. P. Zank, C. M. S. Cohen, S. D. Bale, R. Laker, N. Fargette, F. Valentini, Y. Khotyaintsev, R. Kieokaew, N. Raouafi, E. Davies, R. Vainio, N. Dresing, E. Kilpua, T. Karlsson, C. J. Owen , et al. (1 additional authors not shown)

Abstract: The Parker Solar Probe (PSP) and Solar Orbiter (SolO) missions opened a new observational window in the inner heliosphere, which is finally accessible to direct measurements. On September 05, 2022, a coronal mass ejection (CME)-driven interplanetary (IP) shock has been observed as close as 0.07 au by PSP. The CME then reached SolO, which was well radially-aligned at 0.7 au, thus providing us with… ▽ More The Parker Solar Probe (PSP) and Solar Orbiter (SolO) missions opened a new observational window in the inner heliosphere, which is finally accessible to direct measurements. On September 05, 2022, a coronal mass ejection (CME)-driven interplanetary (IP) shock has been observed as close as 0.07 au by PSP. The CME then reached SolO, which was well radially-aligned at 0.7 au, thus providing us with the opportunity to study the shock properties at so different heliocentric distances. We characterize the shock, investigate its typical parameters and compare its small-scale features at both locations. Using the PSP observations, we investigate how magnetic switchbacks and ion cyclotron waves are processed upon shock crossing. We find that switchbacks preserve their V--B correlation while compressed upon the shock passage, and that the signature of ion cyclotron waves disappears downstream of the shock. By contrast, the SolO observations reveal a very structured shock transition, with a population of shock-accelerated protons of up to about 2 MeV, showing irregularities in the shock downstream, which we correlate with solar wind structures propagating across the shock. At SolO, we also report the presence of low-energy ($\sim$ 100 eV) electrons scattering due to upstream shocklets. This study elucidates how the local features of IP shocks and their environments can be very different as they propagate through the heliosphere. △ Less

Submitted 10 December, 2023; originally announced December 2023.

Comments: In review in ApJ

The Width of Magnetic Ejecta Measured Near 1 au: Lessons from STEREO-A Measurements in 2021--2022

Authors: Noé Lugaz, Bin Zhuang, Camilla Scolini, Nada Al-Haddad, Charles J. Farrugia, Réka M. Winslow, Florian Regnault, Christian Möstl, Emma E. Davies, Antoinette B. Galvin

Abstract: Coronal mass ejections (CMEs) are large-scale eruptions with a typical radial size at 1 au of 0.21 au but their angular width in interplanetary space is still mostly unknown, especially for the magnetic ejecta (ME) part of the CME. We take advantage of STEREO-A angular separation of 20$^\circ$-60$^\circ$ from the Sun-Earth line from October 2020 to August 2022, and perform a two-part study to cons… ▽ More Coronal mass ejections (CMEs) are large-scale eruptions with a typical radial size at 1 au of 0.21 au but their angular width in interplanetary space is still mostly unknown, especially for the magnetic ejecta (ME) part of the CME. We take advantage of STEREO-A angular separation of 20$^\circ$-60$^\circ$ from the Sun-Earth line from October 2020 to August 2022, and perform a two-part study to constrain the angular width of MEs in the ecliptic plane: a) we study all CMEs that are observed remotely to propagate between the Sun-STEREO-A and the Sun-Earth lines and determine how many impact one or both spacecraft in situ, and b) we investigate all in situ measurements at STEREO-A or at L1 of CMEs during the same time period to quantify how many are measured by the two spacecraft. A key finding is that, out of 21 CMEs propagating within 30$^\circ$ of either spacecraft, only four impacted both spacecraft and none provided clean magnetic cloud-like signatures at both spacecraft. Combining the two approaches, we conclude that the typical angular width of a ME at 1 au is $\sim$ 20$^\circ$-30$^\circ$, or 2-3 times less than often assumed and consistent with a 2:1 elliptical cross-section of an ellipsoidal ME. We discuss the consequences of this finding for future multi-spacecraft mission designs and for the coherence of CMEs. △ Less

Submitted 6 December, 2023; originally announced December 2023.

Comments: 21 pages, revision submitted to ApJ

Discrepancies in the Properties of a Coronal Mass Ejection on Scales of 0.03~au as Revealed by Simultaneous Measurements at Solar Orbiter and Wind: The 2021 November 3--5 Event

Authors: F. Regnault, N. Al-Haddad, N. Lugaz, C. J. Farrugia, W. Yu, B. Zhuang, E. E. Davies

Abstract: Simultaneous in situ measurements of coronal mass ejections (CMEs), including both plasma and magnetic field, by two spacecraft in radial alignment have been extremely rare. Here, we report on one such CME measured by Solar Orbiter (SolO) and Wind on 2021 November 3--5, while the spacecraft were radially separated by a heliocentric distance of 0.13 au and angularly by only 2.2°. We focus on the ma… ▽ More Simultaneous in situ measurements of coronal mass ejections (CMEs), including both plasma and magnetic field, by two spacecraft in radial alignment have been extremely rare. Here, we report on one such CME measured by Solar Orbiter (SolO) and Wind on 2021 November 3--5, while the spacecraft were radially separated by a heliocentric distance of 0.13 au and angularly by only 2.2°. We focus on the magnetic cloud (MC) part of the CME. We find notable changes in the R and N magnetic field components and in the speed profiles inside the MC between SolO and Wind. We observe a greater speed at the spacecraft further away from the Sun without any clear compression signatures. Since spacecraft are close to each other and computing fast magnetosonic wave speed inside the MC we rule out temporal evolution as the reason on the observed differences suggesting that spatial variations over 2.2° of the MC structure are at the heart of the observed discrepancies. Moreover, using shock properties at SolO, we forecast an arrival time 2h30 too late for a shock that is just 5h31 away hours from Wind. Predicting the north-south component of the magnetic field at Wind from SolO measurements leads to a relative error of 55 %. These results show that even angular separations as low as 2.2° (or 0.03 au in arclength) between spacecraft can have a large impact on the observed CME properties, rising up the issue of the resolutions of current CME models and potentially affecting our forecasting capabilities. △ Less

Submitted 23 November, 2023; originally announced November 2023.

The effect of magnetic field line topology on ICME-related GCR modulation

Authors: Emma E. Davies, Camilla Scolini, Réka M. Winslow, Andrew P. Jordan, Christian Möstl

Abstract: The large-scale magnetic structure of interplanetary coronal mass ejections (ICMEs) has been shown to affect the galactic cosmic ray (GCR) flux measured in situ by spacecraft, causing temporary decreases known as Forbush decreases (Fds). In some ICMEs, the magnetic ejecta exhibits a magnetic flux rope (FR) structure; the strong magnetic field strength and closed field line geometry of such ICME FR… ▽ More The large-scale magnetic structure of interplanetary coronal mass ejections (ICMEs) has been shown to affect the galactic cosmic ray (GCR) flux measured in situ by spacecraft, causing temporary decreases known as Forbush decreases (Fds). In some ICMEs, the magnetic ejecta exhibits a magnetic flux rope (FR) structure; the strong magnetic field strength and closed field line geometry of such ICME FRs has been proposed to act as a shield to GCR transport. In this study, we identify four ICMEs near Earth that drove Fds with similar mean magnetic field strengths (20 - 25 nT); two ICMEs with more typical mean speeds (~400 km/s), and two fast (~750 km/s) ICMEs. Within each speed pairing, we identify an ICME that exhibited an open magnetic field line topology and compare its effect on the GCR flux to that which exhibited a mostly closed topology. We investigate the different mechanisms that contribute to the resulting ICME-related Fds and their recovery, and determine which properties, if any, play a more important role than others in driving Fds. We find that much of the GCR response to the ICME events in this study is independent of the open or closed magnetic field line topology of the flux rope, and that features such as the fluctuations in speed, magnetic field structure, and expansion within the FR may play more of a role in determining the smaller-scale structure of the Fd profile. △ Less

Submitted 17 October, 2023; originally announced October 2023.

Investigating the Magnetic Structure of Interplanetary Coronal Mass Ejections using Simultaneous Multi-Spacecraft In situ Measurements

Authors: F. Regnault, N. Al-Haddad, N. Lugaz, C. J. Farrugia, W. Yu, E. E. Davies, A. B. Galvin, B. Zhuang

Abstract: In situ measurements from spacecraft typically provide a time series at a single location through coronal mass ejections (CMEs) and they have been one of the main methods to investigate CMEs. CME properties derived from these in situ measurements are affected by temporal changes that occur as the CME passes over the spacecraft, such as radial expansion and ageing, as well as spatial variations wit… ▽ More In situ measurements from spacecraft typically provide a time series at a single location through coronal mass ejections (CMEs) and they have been one of the main methods to investigate CMEs. CME properties derived from these in situ measurements are affected by temporal changes that occur as the CME passes over the spacecraft, such as radial expansion and ageing, as well as spatial variations within a CME. This study uses multi-spacecraft measurements of the same CME at close separations to investigate both the spatial variability (how different a CME profile is when probed by two spacecraft close to each other) and the so-called ageing effect (the effect of the time evolution on in situ properties). We compile a database of 19 events from the past four decades measured by two spacecraft with a radial separation <0.2 au and an angular separation <10°. We find that the average magnetic field strength measured by the two spacecraft differs by 18% of the typical average value, which highlights non-negligible spatial or temporal variations. For one particular event, measurements taken by the two spacecraft allow us to quantify and significantly reduce the ageing effect to estimate the asymmetry of the magnetic field strength profile. This study reveals that single-spacecraft time series near 1 au can be strongly affected by ageing and that correcting for self-similar expansion does not capture the whole ageing effect. △ Less

Submitted 19 September, 2023; originally announced September 2023.

Comments: Accepted for publication at ApJ. 18 pages, 6 figures, 2 tables

New Observations Needed to Advance Our Understanding of Coronal Mass Ejections

Authors: Erika Palmerio, Benjamin J. Lynch, Christina O. Lee, Lan K. Jian, Teresa Nieves-Chinchilla, Emma E. Davies, Brian E. Wood, Noé Lugaz, Réka M. Winslow, Tibor Török, Nada Al-Haddad, Florian Regnault, Meng Jin, Camilla Scolini, Fernando Carcaboso, Charles J. Farrugia, Vincent E. Ledvina, Cooper Downs, Christina Kay, Sanchita Pal, Tarik M. Salman, Robert C. Allen

Abstract: Coronal mass ejections (CMEs) are large eruptions from the Sun that propagate through the heliosphere after launch. Observational studies of these transient phenomena are usually based on 2D images of the Sun, corona, and heliosphere (remote-sensing data), as well as magnetic field, plasma, and particle samples along a 1D spacecraft trajectory (in-situ data). Given the large scales involved and th… ▽ More Coronal mass ejections (CMEs) are large eruptions from the Sun that propagate through the heliosphere after launch. Observational studies of these transient phenomena are usually based on 2D images of the Sun, corona, and heliosphere (remote-sensing data), as well as magnetic field, plasma, and particle samples along a 1D spacecraft trajectory (in-situ data). Given the large scales involved and the 3D nature of CMEs, such measurements are generally insufficient to build a comprehensive picture, especially in terms of local variations and overall geometry of the whole structure. This White Paper aims to address this issue by identifying the data sets and observational priorities that are needed to effectively advance our current understanding of the structure and evolution of CMEs, in both the remote-sensing and in-situ regimes. It also provides an outlook of possible missions and instruments that may yield significant improvements into the subject. △ Less

Submitted 11 September, 2023; originally announced September 2023.

Comments: White Paper submitted to the Heliophysics 2024-2033 Decadal Survey, 9 pages, 4 figures

Journal ref: Bulletin of the AAS, 55(3), 307, 2023

Using Solar Orbiter as an upstream solar wind monitor for real time space weather predictions

Authors: R. Laker, T. S. Horbury, H. O'Brien, E. J. Fauchon-Jones, V. Angelini, N. Fargette, T. Amerstorfer, M. Bauer, C. Möstl, E. E. Davies, J. A. Davies, R. Harrison, D. Barnes, M. Dumbović

Abstract: Coronal mass ejections (CMEs) can create significant disruption to human activities and systems on Earth, much of which can be mitigated with prior warning of the upstream solar wind conditions. However, it is currently extremely challenging to accurately predict the arrival time and internal structure of a CME from coronagraph images alone. In this study, we take advantage of a rare opportunity t… ▽ More Coronal mass ejections (CMEs) can create significant disruption to human activities and systems on Earth, much of which can be mitigated with prior warning of the upstream solar wind conditions. However, it is currently extremely challenging to accurately predict the arrival time and internal structure of a CME from coronagraph images alone. In this study, we take advantage of a rare opportunity to use Solar Orbiter, at 0.5\,AU upstream of Earth, as an upstream solar wind monitor. We were able to use real time science quality magnetic field measurements, taken only 12 minutes earlier, to predict the arrival time of a CME prior to reaching Earth. We used measurements at Solar Orbiter to constrain an ensemble of simulation runs from the ELEvoHI model, reducing the uncertainty in arrival time from 10.4\,hours to 2.5\,hours. There was also an excellent agreement in the $B_z$ profile between Solar Orbiter and Wind spacecraft, despite being separated by 0.5\,AU and 10$^{\circ}$ longitude. Therefore, we show that it is possible to predict not only the arrival time of a CME, but the sub-structure of the magnetic field within it, over a day in advance. The opportunity to use Solar Orbiter as an upstream solar wind monitor will repeat once a year, which should further help assess the efficacy upstream in-situ measurements in real time space weather forecasting. △ Less

Submitted 25 February, 2024; v1 submitted 3 July, 2023; originally announced July 2023.

Journal ref: Space Weather, 22, e2023SW003628 (2024)

The LHCb upgrade I

Authors: LHCb collaboration, R. Aaij, A. S. W. Abdelmotteleb, C. Abellan Beteta, F. Abudinén, C. Achard, T. Ackernley, B. Adeva, M. Adinolfi, P. Adlarson, H. Afsharnia, C. Agapopoulou, C. A. Aidala, Z. Ajaltouni, S. Akar, K. Akiba, P. Albicocco, J. Albrecht, F. Alessio, M. Alexander, A. Alfonso Albero, Z. Aliouche, P. Alvarez Cartelle, R. Amalric, S. Amato , et al. (1298 additional authors not shown)

Abstract: The LHCb upgrade represents a major change of the experiment. The detectors have been almost completely renewed to allow running at an instantaneous luminosity five times larger than that of the previous running periods. Readout of all detectors into an all-software trigger is central to the new design, facilitating the reconstruction of events at the maximum LHC interaction rate, and their select… ▽ More The LHCb upgrade represents a major change of the experiment. The detectors have been almost completely renewed to allow running at an instantaneous luminosity five times larger than that of the previous running periods. Readout of all detectors into an all-software trigger is central to the new design, facilitating the reconstruction of events at the maximum LHC interaction rate, and their selection in real time. The experiment's tracking system has been completely upgraded with a new pixel vertex detector, a silicon tracker upstream of the dipole magnet and three scintillating fibre tracking stations downstream of the magnet. The whole photon detection system of the RICH detectors has been renewed and the readout electronics of the calorimeter and muon systems have been fully overhauled. The first stage of the all-software trigger is implemented on a GPU farm. The output of the trigger provides a combination of totally reconstructed physics objects, such as tracks and vertices, ready for final analysis, and of entire events which need further offline reprocessing. This scheme required a complete revision of the computing model and rewriting of the experiment's software. △ Less

Submitted 10 September, 2024; v1 submitted 17 May, 2023; originally announced May 2023.

Comments: All figures and tables, along with any supplementary material and additional information, are available at http://lhcbproject.web.cern.ch/lhcbproject/Publications/LHCbProjectPublic/LHCb-DP-2022-002.html (LHCb public pages)

Report number: LHCb-DP-2022-002

Journal ref: JINST 19 (2024) P05065

Characterizing ICME-related Forbush Decreases at Mercury using MESSENGER Observations: Identification of a One or Two-Step Structure

Authors: Emma E. Davies, Réka M. Winslow, David J. Lawrence

Abstract: The large-scale magnetic structure of interplanetary coronal mass ejections (ICMEs) has been shown to cause decreases in the galactic cosmic ray (GCR) flux measured in situ by spacecraft, known as Forbush decreases (Fds). We use measurements of the GCR count rate obtained by MESSENGER during its orbital phase around Mercury to identify such Fds related to the passage of ICMEs and characterize thei… ▽ More The large-scale magnetic structure of interplanetary coronal mass ejections (ICMEs) has been shown to cause decreases in the galactic cosmic ray (GCR) flux measured in situ by spacecraft, known as Forbush decreases (Fds). We use measurements of the GCR count rate obtained by MESSENGER during its orbital phase around Mercury to identify such Fds related to the passage of ICMEs and characterize their structure. Of the 42 ICMEs with corresponding high-quality GCR data, 79% are associated with a Fd. Thus a total of 33 ICME-related Fds were identified, 24 of which (73%) have a two-step structure. We use a superposed epoch analysis to build an average Fd profile at MESSENGER and find that despite the variability of individual events, a two-step structure is produced and is directly linked with the magnetic boundaries of the ICME. By using results from previous studies at Earth and Mars, we also address whether two-step Fds are more commonly observed closer to the Sun; we found that although likely, this is not conclusive when comparing to the wide range of results of previous studies conducted at Earth. Finally, we find that the percentage decrease in GCR flux of the Fd is greater at MESSENGER on average than at Earth and Mars, decreasing with increasing heliocentric distance. The relationship between the percentage decrease and maximum hourly decrease is also in agreement with previous studies, and follows trends relating to the expansion of ICMEs as they propagate through the heliosphere. △ Less

Submitted 5 December, 2022; originally announced December 2022.

Successive interacting coronal mass ejections: How to create a perfect storm?

Authors: Gordon J. Koehn, Ravindra T. Desai, Emma E. Davies, Robert J. Forsyth, Jonathan P. Eastwood, Stefaan Poedts

Abstract: Coronal mass ejections (CMEs) are the largest type of eruptions on the Sun and the main driver of severe space weather at the Earth. In this study, we implement a force-free spheromak CME description within 3-D magnetohydrodynamic simulations to parametrically evaluate successive interacting CMEs within a representative heliosphere. We explore CME-CME interactions for a range of orientations, laun… ▽ More Coronal mass ejections (CMEs) are the largest type of eruptions on the Sun and the main driver of severe space weather at the Earth. In this study, we implement a force-free spheromak CME description within 3-D magnetohydrodynamic simulations to parametrically evaluate successive interacting CMEs within a representative heliosphere. We explore CME-CME interactions for a range of orientations, launch time variations and CME handedness and quantify their geo-effectiveness via the primary solar wind variables and empirical measures of the disturbance storm time index and subsolar magnetopause standoff distance. We show how the interaction of two moderate CMEs between the Sun and the Earth can translate into extreme conditions at the Earth and how CME-CME interactions at different radial distances can maximise different solar wind variables that induce different geophysical impacts. In particular, we demonstrate how the orientation and handedness of a given CME can have a significant impact on the conservation and loss of magnetic flux, and consequently B$_z$, due to magnetic reconnection with the interplanetary magnetic field. This study thus implicates identification of CME chirality in the solar corona as an early diagnostic for forecasting geomagnetic storms involving multiple CMEs. △ Less

Submitted 10 November, 2022; originally announced November 2022.

Comments: 18 pages, 11 figures, 2 tables. The Astrophysical Journal, accepted 10 November 2022

Connecting Solar and Stellar Flares/CMEs: Expanding Heliophysics to Encompass Exoplanetary Space Weather

Authors: B. J. Lynch, B. E. Wood, M. Jin, T. Török, X. Sun, E. Palmerio, R. A. Osten, A. A. Vidotto, O. Cohen, J. D. Alvarado-Gómez, J. J. Drake, V. S. Airapetian, Y. Notsu, A. Veronig, K. Namekata, R. M. Winslow, L. K. Jian, A. Vourlidas, N. Lugaz, N. Al-Haddad, W. B. Manchester, C. Scolini, C. J. Farrugia, E. E. Davies, T. Nieves-Chinchilla , et al. (3 additional authors not shown)

Abstract: The aim of this white paper is to briefly summarize some of the outstanding gaps in the observations and modeling of stellar flares, CMEs, and exoplanetary space weather, and to discuss how the theoretical and computational tools and methods that have been developed in heliophysics can play a critical role in meeting these challenges. The maturity of data-inspired and data-constrained modeling of… ▽ More The aim of this white paper is to briefly summarize some of the outstanding gaps in the observations and modeling of stellar flares, CMEs, and exoplanetary space weather, and to discuss how the theoretical and computational tools and methods that have been developed in heliophysics can play a critical role in meeting these challenges. The maturity of data-inspired and data-constrained modeling of the Sun-to-Earth space weather chain provides a natural starting point for the development of new, multidisciplinary research and applications to other stars and their exoplanetary systems. Here we present recommendations for future solar CME research to further advance stellar flare and CME studies. These recommendations will require institutional and funding agency support for both fundamental research (e.g. theoretical considerations and idealized eruptive flare/CME numerical modeling) and applied research (e.g. data inspired/constrained modeling and estimating exoplanetary space weather impacts). In short, we recommend continued and expanded support for: (1.) Theoretical and numerical studies of CME initiation and low coronal evolution, including confinement of "failed" eruptions; (2.) Systematic analyses of Sun-as-a-star observations to develop and improve stellar CME detection techniques and alternatives; (3.) Improvements in data-inspired and data-constrained MHD modeling of solar CMEs and their application to stellar systems; and (4.) Encouraging comprehensive solar--stellar research collaborations and conferences through new interdisciplinary and multi-agency/division funding mechanisms. △ Less

Submitted 12 October, 2022; originally announced October 2022.

Comments: 9 pages, 5 figures, white paper submitted to the Heliophysics 2024--2033 Decadal Survey

Journal ref: Bulletin of the American Astronomical Society, 55(3), 254, 2023

Multi-Spacecraft Observations of the Evolution of Interplanetary Coronal Mass Ejections Between 0.3 and 2.2 AU: Conjunctions with the Juno Spacecraft

Authors: Emma E. Davies, Réka M. Winslow, Camilla Scolini, Robert J. Forsyth, Christian Möstl, Noé Lugaz, Antoinette B. Galvin

Abstract: We present a catalogue of 35 interplanetary coronal mass ejections (ICMEs) observed by the Juno spacecraft and at least one other spacecraft during its cruise phase to Jupiter. We identify events observed by MESSENGER, Venus Express, Wind, and STEREO with magnetic features that can be matched unambiguously with those observed by Juno. A multi-spacecraft study of ICME properties between 0.3 and 2.2… ▽ More We present a catalogue of 35 interplanetary coronal mass ejections (ICMEs) observed by the Juno spacecraft and at least one other spacecraft during its cruise phase to Jupiter. We identify events observed by MESSENGER, Venus Express, Wind, and STEREO with magnetic features that can be matched unambiguously with those observed by Juno. A multi-spacecraft study of ICME properties between 0.3 and 2.2 AU is conducted: we firstly investigate the global expansion by tracking the variation in magnetic field strength with increasing heliocentric distance of individual ICME events, finding significant variability in magnetic field relationships for individual events in comparison with statistical trends. With the availability of plasma data at 1 AU, the local expansion at 1 AU can be compared with global expansion rates between 1 AU and Juno. Despite following expected trends, the local and global expansion rates are only weakly correlated. Finally, for those events with clearly identifiable magnetic flux ropes, we investigate the orientation of the flux rope axis as they propagate; we find that 64% of events displayed a decrease in inclination with increasing heliocentric distance, and 40% of events undergo a significant change in orientation as they propagate towards Juno. The multi-spacecraft catalogue produced in this study provides a valuable link between ICME observations in the inner heliosphere and beyond 1 AU, thereby improving our understanding of ICME evolution. △ Less

Submitted 19 May, 2022; originally announced May 2022.

A Coronal Mass Ejection and Magnetic Ejecta Observed In Situ by STEREO-A and Wind at 55$^\circ$ Angular Separation

Authors: Noé Lugaz, Tarik M. Salman, Charles J. Farrugia, Wenyuan Yu, Bin Zhuang, Nada Al-Haddad, Camilla Scolini, Réka M. Winslow, Christian Möstl, Emma E. Davies, Antoinette B. Galvin

Abstract: We present an analysis of {\it in situ} and remote-sensing measurements of a coronal mass ejection (CME) that erupted on 2021 February 20 and impacted both the Solar TErrestrial RElations Observatory (STEREO)-A and the {\it Wind} spacecraft, which were separated longitudinally by 55$^\circ$. Measurements on 2021 February 24 at both spacecraft are consistent with the passage of a magnetic ejecta (M… ▽ More We present an analysis of {\it in situ} and remote-sensing measurements of a coronal mass ejection (CME) that erupted on 2021 February 20 and impacted both the Solar TErrestrial RElations Observatory (STEREO)-A and the {\it Wind} spacecraft, which were separated longitudinally by 55$^\circ$. Measurements on 2021 February 24 at both spacecraft are consistent with the passage of a magnetic ejecta (ME), making this one of the widest reported multi-spacecraft ME detections. The CME is associated with a low-inclined and wide filament eruption from the Sun's southern hemisphere, which propagates between STEREO-A and {\it Wind} around E34. At STEREO-A, the measurements indicate the passage of a moderately fast ($\sim 425$~km\,s$^{-1}$) shock-driving ME, occurring 2--3 days after the end of a high speed stream (HSS). At {\it Wind}, the measurements show a faster ($\sim 490$~km\,s$^{-1}$) and much shorter ME, not preceded by a shock nor a sheath, and occurring inside the back portion of the HSS. The ME orientation measured at both spacecraft is consistent with a passage close to the legs of a curved flux rope. The short duration of the ME observed at {\it Wind} and the difference in the suprathermal electron pitch-angle data between the two spacecraft are the only results that do not satisfy common expectations. We discuss the consequence of these measurements on our understanding of the CME shape and extent and the lack of clear signatures of the interaction between the CME and the HSS. △ Less

Submitted 30 March, 2022; originally announced March 2022.

Comments: accepted to ApJ

Multi-spacecraft observations of the structure of the sheath of an interplanetary coronal mass ejection and related energetic ion enhancement

Authors: E. K. J. Kilpua, S. W. Good, N. Dresing, R. Vainio, E. E. Davies, R. J. Forsyth, J. Gieseler, B. Lavraud, E. Asvestari, D. E. Morosan, J. Pomoell, D. J. Price, D. Heyner, T. S. Horbury, V. Angelini, H. O'Brien, V. Evans, J. Rodriguez-Pacheco, R. Gómez Herrero, G. C. Ho, R. Wimmer-Schweingruber

Abstract: Sheaths ahead of coronal mass ejections (CMEs) are large heliospheric structures that form with CME expansion and propagation. Turbulent and compressed sheaths contribute to the acceleration of particles in the corona and in interplanetary space, but the relation of their internal structures to particle energization is still relatively little studied. In particular, the role of sheaths in accelera… ▽ More Sheaths ahead of coronal mass ejections (CMEs) are large heliospheric structures that form with CME expansion and propagation. Turbulent and compressed sheaths contribute to the acceleration of particles in the corona and in interplanetary space, but the relation of their internal structures to particle energization is still relatively little studied. In particular, the role of sheaths in accelerating particles when the shock Mach number is low is a significant open problem. This work seeks to provide new insights on the internal structure of CME sheaths with regard to energetic particle enhancements. A good opportunity to achieve this aim was provided by observations of a sheath made by radially aligned spacecraft at 0.8 and $\sim$ 1 AU (Solar Orbiter, Wind, ACE and BepiColombo) on 19-21 April 2020. The sheath was preceded by a weak shock. Energetic ion enhancements occurred at different locations within the sheath structure at Solar Orbiter and L1. Magnetic fluctuation amplitudes at inertial-range scales increased in the sheath relative to the upstream wind. However, when normalised to the local mean field, fluctuation amplitudes did not increase significantly; magnetic compressibility of fluctuation also did not increase. Various substructures were embedded within the sheath at the different spacecraft, including multiple heliospheric current sheet (HCS) crossings and a small-scale flux rope. At L1, the ion flux enhancement was associated with the HCS crossings, while at Solar Orbiter, the enhancement occurred within the rope. Substructures that are swept from the upstream solar wind and compressed in the sheath can act as particularly effective acceleration sites. A possible acceleration mechanism is betatron acceleration associated with the small-scale flux rope and the warped HCS in the sheath. △ Less

Submitted 17 December, 2021; originally announced December 2021.

Comments: 14 pages, 12 figures; published in Astronomy & Astrophysics, Solar Orbiter First Results (Cruise Phase) special issue

Causes and Consequences of Magnetic Complexity Changes within Interplanetary Coronal Mass Ejections: a Statistical Study

Authors: Camilla Scolini, Réka M. Winslow, Noé Lugaz, Tarik M. Salman, Emma E. Davies, Antoinette B. Galvin

Abstract: We present the first statistical analysis of complexity changes affecting the magnetic structure of interplanetary coronal mass ejections (ICMEs), with the aim of answering the questions: How frequently do ICMEs undergo magnetic complexity changes during propagation? What are the causes of such changes? Do the in situ properties of ICMEs differ depending on whether they exhibit complexity changes?… ▽ More We present the first statistical analysis of complexity changes affecting the magnetic structure of interplanetary coronal mass ejections (ICMEs), with the aim of answering the questions: How frequently do ICMEs undergo magnetic complexity changes during propagation? What are the causes of such changes? Do the in situ properties of ICMEs differ depending on whether they exhibit complexity changes? We consider multi-spacecraft observations of 31 ICMEs by MESSENGER, Venus Express, ACE, and STEREO between 2008 and 2014 while radially aligned. By analyzing their magnetic properties at the inner and outer spacecraft, we identify complexity changes which manifest as fundamental alterations or significant re-orientations of the ICME. Plasma and suprathermal electron data at 1 au, and simulations of the solar wind enable us to reconstruct the propagation scenario for each event, and to identify critical factors controlling their evolution. Results show that ~65% of ICMEs change their complexity between Mercury and 1 au and that interaction with multiple large-scale solar wind structures is the driver of these changes. Furthermore, 71% of ICMEs observed at large radial (>0.4 au) but small longitudinal (<15 degrees) separations exhibit complexity changes, indicating that propagation over large distances strongly affects ICMEs. Results also suggest ICMEs may be magnetically coherent over angular scales of at least 15 degrees, supporting earlier theoretical and observational estimates. This work presents statistical evidence that magnetic complexity changes are consequences of ICME interactions with large-scale solar wind structures, rather than intrinsic to ICME evolution, and that such changes are only partly identifiable from in situ measurements at 1 au. △ Less

Submitted 24 November, 2021; originally announced November 2021.

A Catalog of Interplanetary Coronal Mass Ejections Observed by Juno between 1 and 5.4 AU

Authors: Emma E. Davies, Robert J. Forsyth, Réka M. Winslow, Christian Möstl, Noé Lugaz

Abstract: We use magnetic field measurements by the Juno spacecraft to catalog and investigate interplanetary coronal mass ejections (ICMEs) beyond 1 AU. During its cruise phase, Juno spent about 5 years in the solar wind between 2011 September and 2016 June, providing measurements of the interplanetary magnetic field (IMF) between 1 and 5.4 AU. Juno therefore presents the most recent opportunity for a stat… ▽ More We use magnetic field measurements by the Juno spacecraft to catalog and investigate interplanetary coronal mass ejections (ICMEs) beyond 1 AU. During its cruise phase, Juno spent about 5 years in the solar wind between 2011 September and 2016 June, providing measurements of the interplanetary magnetic field (IMF) between 1 and 5.4 AU. Juno therefore presents the most recent opportunity for a statistical analysis of ICME properties beyond 1 AU since the Ulysses mission (1990-2009). Our catalog includes 80 such ICME events, 32 of which contain associated flux-rope-like structures. We find that the dependency of the mean magnetic field strength of the magnetic flux ropes decreases with heliocentric distance as $r^{-1.24 \pm 0.43}$ between 1 and 5.4 AU, in good agreement with previous relationships calculated using ICME catalogs at Ulysses. We combine the Juno catalog with the HELCATS catalog to create a dataset of ICMEs covering 0.3-5.4 AU. Using a linear regression model to fit the combined dataset on a double-logarithmic plot, we find that there is a clear difference between global expansion rates for ICMEs observed at lesser heliocentric distances and those observed farther out beyond 1 AU. The cataloged ICMEs at Juno present a good basis for future multispacecraft studies of ICME evolution between the inner heliosphere, 1 AU, and beyond. △ Less

Submitted 22 November, 2021; originally announced November 2021.

Comments: Table 1 is available in its entirety in machine-readable format. Please contact the corresponding author if you wish to use the database

Multipoint interplanetary coronal mass ejections observed with Solar Orbiter, BepiColombo, Parker Solar Probe, Wind and STEREO-A

Authors: C. Möstl, A. J. Weiss, M. A. Reiss, T. Amerstorfer, R. L. Bailey, J. Hinterreiter, M. Bauer, D. Barnes, J. A. Davies, R. A. Harrison, J. L. Freiherr von Forstner, E. E. Davies, D. Heyner, T. Horbury, S. D. Bale

Abstract: We report the result of the first search for multipoint in situ and imaging observations of interplanetary coronal mass ejections (ICMEs) starting with the first Solar Orbiter (SolO) data in 2020 April - 2021 April. A data exploration analysis is performed including visualizations of the magnetic field and plasma observations made by the five spacecraft SolO, BepiColombo, Parker Solar Probe (PSP),… ▽ More We report the result of the first search for multipoint in situ and imaging observations of interplanetary coronal mass ejections (ICMEs) starting with the first Solar Orbiter (SolO) data in 2020 April - 2021 April. A data exploration analysis is performed including visualizations of the magnetic field and plasma observations made by the five spacecraft SolO, BepiColombo, Parker Solar Probe (PSP), Wind and STEREO-A, in connection with coronagraph and heliospheric imaging observations from STEREO-A/SECCHI and SOHO/LASCO. We identify ICME events that could be unambiguously followed with the STEREO-A heliospheric imagers during their interplanetary propagation to their impact at the aforementioned spacecraft, and look for events where the same ICME is seen in situ by widely separated spacecraft. We highlight two events: (1) a small streamer blowout CME on 2020 June 23 observed with a triple lineup by PSP, BepiColombo and Wind, guided by imaging with STEREO-A, and (2) the first fast CME of solar cycle 25 ($ \approx 1600$ km s$^{-1}$) on 2020 November 29 observed in situ by PSP and STEREO-A. These results are useful for modeling the magnetic structure of ICMEs and the interplanetary evolution and global shape of their flux ropes and shocks, and for studying the propagation of solar energetic particles. The combined data from these missions are already turning out to be a treasure trove for space weather research and are expected to become even more valuable with an increasing number of ICME events expected during the rise and maximum of solar cycle 25. △ Less

Submitted 4 January, 2022; v1 submitted 15 September, 2021; originally announced September 2021.

Comments: in press at ApJ Letters (submitted 2021 September 15, revised 2021 November 24, accepted 2021 December 9). 11 pages, 3 figures, 1 table

Multi-spacecraft Study of the Solar Wind at Solar Minimum: Dependence on Latitude and Transient Outflows

Authors: R. Laker, T. S. Horbury, S. D. Bale, L. Matteini, T. Woolley, L. D. Woodham, J. E. Stawarz, E. E. Davies, J. P. Eastwood, M. J. Owens, H. O'Brien, V. Evans, V. Angelini, I. Richter, D. Heyner, C. J. Owen, P. Louarn, A. Federov

Abstract: The recent launches of Parker Solar Probe (PSP), Solar Orbiter (SO) and BepiColombo, along with several older spacecraft, have provided the opportunity to study the solar wind at multiple latitudes and distances from the Sun simultaneously. We take advantage of this unique spacecraft constellation, along with low solar activity across two solar rotations between May and July 2020, to investigate h… ▽ More The recent launches of Parker Solar Probe (PSP), Solar Orbiter (SO) and BepiColombo, along with several older spacecraft, have provided the opportunity to study the solar wind at multiple latitudes and distances from the Sun simultaneously. We take advantage of this unique spacecraft constellation, along with low solar activity across two solar rotations between May and July 2020, to investigate how the solar wind structure, including the Heliospheric Current Sheet (HCS), varies with latitude. We visualise the sector structure of the inner heliosphere by ballistically mapping the polarity and solar wind speed from several spacecraft onto the Sun's source surface. We then assess the HCS morphology and orientation with the in situ data and compare with a predicted HCS shape. We resolve ripples in the HCS on scales of a few degrees in longitude and latitude, finding that the local orientation of sector boundaries were broadly consistent with the shape of the HCS but were steepened with respect to a modelled HCS at the Sun. We investigate how several CIRs varied with latitude, finding evidence for the compression region affecting slow solar wind outside the latitude extent of the faster stream. We also identified several transient structures associated with HCS crossings, and speculate that one such transient may have disrupted the local HCS orientation up to five days after its passage. We have shown that the solar wind structure varies significantly with latitude, with this constellation providing context for solar wind measurements that would not be possible with a single spacecraft. These measurements provide an accurate representation of the solar wind within $\pm 10^{\circ}$ latitude, which could be used as a more rigorous constraint on solar wind models and space weather predictions. In the future, this range of latitudes will increase as SO's orbit becomes more inclined. △ Less

Submitted 22 June, 2021; v1 submitted 27 February, 2021; originally announced March 2021.

Comments: Accepted version

Journal ref: A&A 652, A105 (2021)

Radial Evolution of the April 2020 Stealth Coronal Mass Ejection between 0.8 and 1 AU -- A Comparison of Forbush Decreases at Solar Orbiter and Earth

Authors: Johan L. Freiherr von Forstner, Mateja Dumbović, Christian Möstl, Jingnan Guo, Athanasios Papaioannou, Robert Elftmann, Zigong Xu, Jan Christoph Terasa, Alexander Kollhoff, Robert F. Wimmer-Schweingruber, Javier Rodríguez-Pacheco, Andreas J. Weiss, Jürgen Hinterreiter, Tanja Amerstorfer, Maike Bauer, Anatoly V. Belov, Maria A. Abunina, Timothy Horbury, Emma E. Davies, Helen O'Brien, Robert C. Allen, G. Bruce Andrews, Lars Berger, Sebastian Boden, Ignacio Cernuda Cangas , et al. (18 additional authors not shown)

Abstract: Aims. We present observations of the first coronal mass ejection (CME) observed at the Solar Orbiter spacecraft on April 19, 2020, and the associated Forbush decrease (FD) measured by its High Energy Telescope (HET). This CME is a multispacecraft event also seen near Earth the next day. Methods. We highlight the capabilities of HET for observing small short-term variations of the galactic cosmic r… ▽ More Aims. We present observations of the first coronal mass ejection (CME) observed at the Solar Orbiter spacecraft on April 19, 2020, and the associated Forbush decrease (FD) measured by its High Energy Telescope (HET). This CME is a multispacecraft event also seen near Earth the next day. Methods. We highlight the capabilities of HET for observing small short-term variations of the galactic cosmic ray count rate using its single detector counters. The analytical ForbMod model is applied to the FD measurements to reproduce the Forbush decrease at both locations. Input parameters for the model are derived from both in situ and remote-sensing observations of the CME. Results. The very slow (~350 km/s) stealth CME caused a FD with an amplitude of 3 % in the low-energy cosmic ray measurements at HET and 2 % in a comparable channel of the Cosmic Ray Telescope for the Effects of Radiation (CRaTER) on the Lunar Reconnaissance Orbiter, as well as a 1 % decrease in neutron monitor measurements. Significant differences are observed in the expansion behavior of the CME at different locations, which may be related to influence of the following high speed solar wind stream. Under certain assumptions, ForbMod is able to reproduce the observed FDs in low-energy cosmic ray measurements from HET as well as CRaTER, but with the same input parameters, the results do not agree with the FD amplitudes at higher energies measured by neutron monitors on Earth. We study these discrepancies and provide possible explanations. Conclusions. This study highlights that the novel measurements of the Solar Orbiter can be coordinated with other spacecraft to improve our understanding of space weather in the inner heliosphere. Multi-spacecraft observations combined with data-based modeling are also essential to understand the propagation and evolution of CMEs as well as their space weather impacts. △ Less

Submitted 24 February, 2021; originally announced February 2021.

Comments: accepted for publication in Astronomy & Astrophysics

Journal ref: A&A 656, A1 (2021)

Reconstructing phase-resolved hysteresis loops from first-order reversal curves

Authors: Dustin A. Gilbert, Peyton D. Murray, Julius De Rojas, Randy K. Dumas, Joseph E. Davies, Kai Liu

Abstract: The first order reversal curve (FORC) method is a magnetometry based technique used to capture nanoscale magnetic phase separation and interactions with macroscopic measurements using minor hysteresis loop analysis. This makes the FORC technique a powerful tool in the analysis of complex systems which cannot be effectively probed using localized techniques. However, recovering quantitative details… ▽ More The first order reversal curve (FORC) method is a magnetometry based technique used to capture nanoscale magnetic phase separation and interactions with macroscopic measurements using minor hysteresis loop analysis. This makes the FORC technique a powerful tool in the analysis of complex systems which cannot be effectively probed using localized techniques. However, recovering quantitative details about the identified phases which can be compared to traditionally measured metrics remains an enigmatic challenge. We demonstrate a technique to reconstruct phase-resolved magnetic hysteresis loops by selectively integrating the measured FORC distribution. From these minor loops, the traditional metrics - including the coercivity and saturation field, and the remanent and saturation magnetization - can be determined. In order to perform this analysis, special consideration must be paid to the accurate quantitative management of the so-called reversible features. This technique is demonstrated on three representative materials systems, high anisotropy FeCuPt thin-films, Fe nanodots, and SmCo/Fe exchange spring magnet films, and shows excellent agreement with the direct measured major loop, as well as the phase separated loops. △ Less

Submitted 20 December, 2020; originally announced December 2020.

In situ multi-spacecraft and remote imaging observations of the first CME detected by Solar Orbiter and BepiColombo

Authors: E. E. Davies, C. Möstl, M. J. Owens, A. J. Weiss, T. Amerstorfer, J. Hinterreiter, M. Bauer, R. L. Bailey, M. A. Reiss, R. J. Forsyth, T. S. Horbury, H. O'Brien, V. Evans, V. Angelini, D. Heyner, I. Richter, H-U. Auster, W. Magnes, W. Baumjohann, D. Fischer, D. Barnes, J. A. Davies, R. A. Harrison

Abstract: On 2020 April 19 a coronal mass ejection (CME) was detected in situ by Solar Orbiter at a heliocentric distance of about 0.8 AU. The CME was later observed in situ on April 20th by the Wind and BepiColombo spacecraft whilst BepiColombo was located very close to Earth. This CME presents a good opportunity for a triple radial alignment study, as the spacecraft were separated by less than 5$^\circ$ i… ▽ More On 2020 April 19 a coronal mass ejection (CME) was detected in situ by Solar Orbiter at a heliocentric distance of about 0.8 AU. The CME was later observed in situ on April 20th by the Wind and BepiColombo spacecraft whilst BepiColombo was located very close to Earth. This CME presents a good opportunity for a triple radial alignment study, as the spacecraft were separated by less than 5$^\circ$ in longitude. The source of the CME, which was launched on April 15th, was an almost entirely isolated streamer blowout. STEREO-A observed the event remotely from -75.1$^\circ$ longitude, which is an exceptionally well suited viewpoint for heliospheric imaging of an Earth directed CME. The configuration of the four spacecraft has provided an exceptionally clean link between remote imaging and in situ observations of the CME. We have used the in situ observations of the CME at Solar Orbiter, Wind, and BepiColombo, and the remote observations of the CME at STEREO-A in combination with flux rope models to determine the global shape of the CME and its evolution as it propagated through the inner heliosphere. A clear flattening of the CME cross-section has been observed by STEREO-A, and further confirmed by comparing profiles of the flux rope models to the in situ data, where the distorted flux rope cross-section qualitatively agrees most with in situ observations of the magnetic field at Solar Orbiter. Comparing in situ observations of the magnetic field between spacecraft, we find that the dependence of the maximum (mean) magnetic field strength decreases with heliocentric distance as $r^{-1.24 \pm 0.50}$ ($r^{-1.12 \pm 0.14}$), in disagreement with previous studies. Further assessment of the axial and poloidal magnetic field strength dependencies suggests that the expansion of the CME is likely neither self-similar nor cylindrically symmetric. △ Less

Submitted 23 February, 2021; v1 submitted 14 December, 2020; originally announced December 2020.

Journal ref: A&A 656, A2 (2021)

On the Radial and Longitudinal Variation of a Magnetic Cloud: ACE, Wind, ARTEMIS and Juno Observations

Authors: E. E. Davies, R. J. Forsyth, S. W. Good, E. K. J. Kilpua

Abstract: We present observations of the same magnetic cloud made near Earth by the Advance Composition Explorer (ACE), Wind, and the Acceleration, Reconnection, Turbulence and Electrodynamics of the Moon's Interaction with the Sun (ARTEMIS) mission comprising the Time History of Events and Macroscale Interactions during Substorms (THEMIS) B and THEMIS C spacecraft, and later by Juno at a distance of 1.2 AU… ▽ More We present observations of the same magnetic cloud made near Earth by the Advance Composition Explorer (ACE), Wind, and the Acceleration, Reconnection, Turbulence and Electrodynamics of the Moon's Interaction with the Sun (ARTEMIS) mission comprising the Time History of Events and Macroscale Interactions during Substorms (THEMIS) B and THEMIS C spacecraft, and later by Juno at a distance of 1.2 AU. The spacecraft were close to radial alignment throughout the event, with a longitudinal separation of $3.6^{\circ}$ between Juno and the spacecraft near Earth. The magnetic cloud likely originated from a filament eruption on 22 October 2011 at 00:05 UT, and caused a strong geomagnetic storm at Earth commencing on 24 October. Observations of the magnetic cloud at each spacecraft have been analysed using Minimum Variance Analysis and two flux rope fitting models, Lundquist and Gold-Hoyle, to give the orientation of the flux rope axis. We explore the effect different trailing edge boundaries have on the results of each analysis method, and find a clear difference between the orientations of the flux rope axis at the near-Earth spacecraft and Juno, independent of the analysis method. The axial magnetic field strength and the radial width of the flux rope are calculated using both observations and fitting parameters and their relationship with heliocentric distance is investigated. Differences in results between the near-Earth spacecraft and Juno are attributed not only to the radial separation, but to the small longitudinal separation which resulted in a surprisingly large difference in the in situ observations between the spacecraft. This case study demonstrates the utility of Juno cruise data as a new opportunity to study magnetic clouds beyond 1 AU, and the need for caution in future radial alignment studies. △ Less

Submitted 21 September, 2020; originally announced September 2020.

Three Dimensional Simulations of Solar Wind Preconditioning and the 23 July 2012 Interplanetary Coronal Mass Ejection

Authors: Ravindra T. Desai, Han Zhang, Emma E. Davies, Julia E. Stawarz, Joan Mico-Gomez, Pilar Iváñez-Ballesteros

Abstract: Predicting the large-scale eruptions from the solar corona and their propagation through interplanetary space remains an outstanding challenge in solar- and helio-physics research. In this article, we describe three dimensional magnetohydrodynamic simulations of the inner heliosphere leading up to and including the extreme interplanetary coronal mass ejection (ICME) of 23 July 2012, developed usin… ▽ More Predicting the large-scale eruptions from the solar corona and their propagation through interplanetary space remains an outstanding challenge in solar- and helio-physics research. In this article, we describe three dimensional magnetohydrodynamic simulations of the inner heliosphere leading up to and including the extreme interplanetary coronal mass ejection (ICME) of 23 July 2012, developed using the code PLUTO. The simulations are driven using the output of coronal models for Carrington rotations 2125 and 2126 and, given the uncertainties in the initial conditions, are able to reproduce an event of comparable magnitude to the 23 July ICME, with similar velocity and density profiles at 1 au. The launch-time of this event is then varied with regards to an initial 19 July ICME and the effects of solar wind preconditioning are found to be significant for an event of this magnitude and to decrease over a time-window consistent with the ballistic refilling of the depleted heliospheric sector. These results indicate that the 23 July ICME was mostly unaffected by events prior, but would have travelled even faster had it erupted closer in time to the 19 July event where it would have experienced even lower drag forces. We discuss this systematic study of solar wind preconditioning in the context of space weather forecasting. △ Less

Submitted 4 September, 2020; originally announced September 2020.

Comments: 17 pages, 5 figures, 1 table. Solar Physics accepted 26 August 2020

Construction and Calibration of a Streaked Optical Spectrometer for Shock Temperature

Authors: Erik J. Davies, Dylan K. Spaulding, Sarah T. Stewart

Abstract: Here we describe the implementation and calibration of a streaked visible spectrometer (SVS) for optical pyrometry and emission/absorption spectroscopy on light gas gun platforms in the UC Davis Shock Compression Laboratory. The diagnostic consists of an optical streak camera coupled to a spectrometer to provide temporally and spectrally-resolved records of visible emission from dynamically-compre… ▽ More Here we describe the implementation and calibration of a streaked visible spectrometer (SVS) for optical pyrometry and emission/absorption spectroscopy on light gas gun platforms in the UC Davis Shock Compression Laboratory. The diagnostic consists of an optical streak camera coupled to a spectrometer to provide temporally and spectrally-resolved records of visible emission from dynamically-compressed materials. Fiber optic coupling to the sample enables a small diagnostic footprint on the target face and flexibility of operation on multiple launch systems without the need for open optics. We present the details of calibration (time, wavelength and spectral radiance) for absolute temperature determination and present benchmark measurements of system performance. △ Less

Submitted 28 May, 2020; originally announced May 2020.

Comments: 6 pages, 3 figures Davies, E., et al. (accepted). In J. Lane, T. Germann, and M. Armstrong (Eds.), 21st Biennial APS Conference on Shock Compression of Condensed Matter (SCCM19). AIP Publishing

Silicate Melting and Vaporization during Rocky Planet Formation

Authors: Erik J. Davies, Phil J. Carter, Seth Root, Richard G. Kraus, Dylan K. Spaulding, Sarah T. Stewart, Stein B. Jacobsen$^{4}$

Abstract: Collisions that induce melting and vaporization can have a substantial effect on the thermal and geochemical evolution of planets. However, the thermodynamics of major minerals are not well known at the extreme conditions attained during planet formation. We obtained new data at the Sandia Z Machine and use published thermodynamic data for the major mineral forsterite (Mg$_2$SiO$_4$) to calculate… ▽ More Collisions that induce melting and vaporization can have a substantial effect on the thermal and geochemical evolution of planets. However, the thermodynamics of major minerals are not well known at the extreme conditions attained during planet formation. We obtained new data at the Sandia Z Machine and use published thermodynamic data for the major mineral forsterite (Mg$_2$SiO$_4$) to calculate the specific entropy in the liquid region of the principal Hugoniot. We use our calculated specific entropy of shocked forsterite, and revised entropies for shocked silica, to determine the critical impact velocities for melting or vaporization upon decompression from the shocked state to 1 bar and the triple points, which are near the pressures of the solar nebula. We also demonstrate the importance of the initial temperature on the criteria for vaporization. Applying these results to $N$-body simulations of terrestrial planet formation, we find that up to 20 to 40% of the total system mass is processed through collisions with velocities that exceed the criteria for incipient vaporization at the triple point. Vaporizing collisions between small bodies are an important component of terrestrial planet formation. △ Less

Submitted 3 February, 2020; originally announced February 2020.

Comments: 15 pages, 8 figures, Accepted for publication in JGR: Planets

Blur resolved OCT: full-range interferometric synthetic aperture microscopy through dispersion encoding

Authors: Jonathan H. Mason, Mike E. Davies, Pierre O. Bagnaninchi

Abstract: We present a computational method for full-range interferometric synthetic aperture microscopy (ISAM) under dispersion encoding. With this, one can effectively double the depth range of optical coherence tomography (OCT), whilst dramatically enhancing the spatial resolution away from the focal plane. To this end, we propose a model-based iterative reconstruction (MBIR) method, where ISAM is direct… ▽ More We present a computational method for full-range interferometric synthetic aperture microscopy (ISAM) under dispersion encoding. With this, one can effectively double the depth range of optical coherence tomography (OCT), whilst dramatically enhancing the spatial resolution away from the focal plane. To this end, we propose a model-based iterative reconstruction (MBIR) method, where ISAM is directly considered in an optimization approach, and we make the discovery that sparsity promoting regularization effectively recovers the full-range signal. Within this work, we adopt an optimal nonuniform discrete fast Fourier transform (NUFFT) implementation of ISAM, which is both fast and numerically stable throughout iterations. We validate our method with several complex samples, scanned with a commercial SD-OCT system with no hardware modification. With this, we both demonstrate full-range ISAM imaging, and significantly outperform combinations of existing methods. △ Less

Submitted 31 January, 2020; v1 submitted 15 May, 2019; originally announced May 2019.

Comments: 17 pages, 7 figures. The images have been compressed for arxiv - please follow DOI for full resolution

Journal ref: Opt. Express 28, 3879-3894 (2020)

Quantitative cone-beam CT reconstruction with polyenergetic scatter model fusion

Authors: Jonathan H. Mason, Alessandro Perelli, William H. Nailon, Mike E. Davies

Abstract: Scatter can account for large errors in cone-beam CT (CBCT) due to its wide field of view, and its complicated nature makes its compensation difficult. Iterative polyenergetic reconstruction algorithms offer the potential to provide quantitative imaging in CT, but they are usually incompatible with scatter contaminated measurements. In this work, we introduce a polyenergetic convolutional scatter… ▽ More Scatter can account for large errors in cone-beam CT (CBCT) due to its wide field of view, and its complicated nature makes its compensation difficult. Iterative polyenergetic reconstruction algorithms offer the potential to provide quantitative imaging in CT, but they are usually incompatible with scatter contaminated measurements. In this work, we introduce a polyenergetic convolutional scatter model that is directly fused into the reconstruction process, and exploits information readily available at each iteration for a fraction of additional computational cost. We evaluate this method with numerical and real CBCT measurements, and show significantly enhanced electron density estimation and artifact mitigation over pre-calculated fast adaptive scatter kernel superposition (fASKS). We demonstrate our approach has two levels of benefit: reducing the bias introduced by estimating scatter prior to reconstruction; and adapting to the spectral and spatial properties of the specimen. △ Less

Submitted 10 January, 2020; v1 submitted 11 May, 2018; originally announced May 2018.

Comments: 28 pages, 12 figures

Journal ref: Phys. Med. Biol. 63 (2018) 225001

Polyquant CT: direct electron and mass density reconstruction from a single polyenergetic source

Authors: Jonathan H. Mason, Alessandro Perelli, William H. Nailon, Mike E. Davies

Abstract: Quantifying material mass and electron density from computed tomography (CT) reconstructions can be highly valuable in certain medical practices, such as radiation therapy planning. However, uniquely parameterising the X-ray attenuation in terms of mass or electron density is an ill-posed problem when a single polyenergetic source is used with a spectrally indiscriminate detector. Existing approac… ▽ More Quantifying material mass and electron density from computed tomography (CT) reconstructions can be highly valuable in certain medical practices, such as radiation therapy planning. However, uniquely parameterising the X-ray attenuation in terms of mass or electron density is an ill-posed problem when a single polyenergetic source is used with a spectrally indiscriminate detector. Existing approaches to single source polyenergetic modelling often impose consistency with a physical model, such as water--bone or photoelectric--Compton decompositions, which will either require detailed prior segmentation or restrictive energy dependencies, and may require further calibration to the quantity of interest. In this work, we introduce a data centric approach to fitting the attenuation with piecewise-linear functions directly to mass or electron density, and present a segmentation-free statistical reconstruction algorithm for exploiting it, with the same order of complexity as other iterative methods. We show how this allows both higher accuracy in attenuation modelling, and demonstrate its superior quantitative imaging, with numerical chest and metal implant data, and validate it with real cone-beam CT measurements. △ Less

Submitted 29 April, 2019; v1 submitted 27 June, 2017; originally announced June 2017.

Comments: 23 pages, 12 figures

Journal ref: Phys. Med. Biol. 62 (2017) 8739

Compressive Computed Tomography Reconstruction through Denoising Approximate Message Passing

Authors: Alessandro Perelli, Michael Lexa, Ali Can, Mike E. Davies

Abstract: X-ray Computed Tomography (CT) reconstruction from a sparse number of views is a useful way to reduce either the radiation dose or the acquisition time, for example in fixed-gantry CT systems, however this results in an ill-posed inverse problem whose solution is typically computationally demanding. Approximate Message Passing (AMP) techniques represent the state of the art for solving under-sampl… ▽ More X-ray Computed Tomography (CT) reconstruction from a sparse number of views is a useful way to reduce either the radiation dose or the acquisition time, for example in fixed-gantry CT systems, however this results in an ill-posed inverse problem whose solution is typically computationally demanding. Approximate Message Passing (AMP) techniques represent the state of the art for solving under-sampling Compressed Sensing problems with random linear measurements but there are still not clear solutions on how AMP should be modified and how it performs with real world problems. This paper investigates the question of whether we can employ an AMP framework for real sparse view CT imaging? The proposed algorithm for approximate inference in tomographic reconstruction incorporates a number of advances from within the AMP community, resulting in the Denoising Generalized Approximate Message Passing CT algorithm (D-GAMP-CT). Specifically, this exploits the use of sophisticated image denoisers to regularize the reconstruction. While in order to reduce the probability of divergence the (Radon) system and Poisson non-linear noise model are treated separately, exploiting the existence of efficient preconditioners for the former and the generalized noise modelling in GAMP for the latter. Experiments with simulated and real CT baggage scans confirm that the performance of the proposed algorithm outperforms statistical CT optimization solvers. △ Less

Submitted 3 November, 2020; v1 submitted 15 September, 2016; originally announced September 2016.

Comments: 38 pages, 16 figures, to be published in SIAM Journal on Imaging Sciences

Journal ref: SIAM Journal on Imaging Sciences, vol. 13, n. 4, pp. 1860-1897, 2020

The Role of Astronomy in the History of Science

Authors: E B Davies

Abstract: We discuss the extent to which the visibility of the heavens was a necessary condition for the development of science, with particular reference to the measurement of time. Our conclusion is that while astronomy had significant importance, the growth of most areas of science was more heavily influenced by the accuracy of scientific instruments, and hence by current technology. We discuss the extent to which the visibility of the heavens was a necessary condition for the development of science, with particular reference to the measurement of time. Our conclusion is that while astronomy had significant importance, the growth of most areas of science was more heavily influenced by the accuracy of scientific instruments, and hence by current technology. △ Less

Submitted 10 July, 2002; originally announced July 2002.

Comments: 15 pages