Showing 1–50 of 55 results for author: Davies, A

Beacon2Science: Enhancing STEREO/HI beacon data1 with machine learning for efficient CME tracking

Authors: Justin Le Louëdec, Maike Bauer, Tanja Amerstorfer, Jackie A. Davies

Abstract: Observing and forecasting coronal mass ejections (CME) in real-time is crucial due to the strong geomagnetic storms they can generate that can have a potentially damaging effect, for example, on satellites and electrical devices. With its near-real-time availability, STEREO/HI beacon data is the perfect candidate for early forecasting of CMEs. However, previous work concluded that CME arrival pred… ▽ More Observing and forecasting coronal mass ejections (CME) in real-time is crucial due to the strong geomagnetic storms they can generate that can have a potentially damaging effect, for example, on satellites and electrical devices. With its near-real-time availability, STEREO/HI beacon data is the perfect candidate for early forecasting of CMEs. However, previous work concluded that CME arrival prediction based on beacon data could not achieve the same accuracy as with high-resolution science data due to data gaps and lower quality. We present our novel pipeline entitled ''Beacon2Science'', bridging the gap between beacon and science data to improve CME tracking. Through this pipeline, we first enhance the quality (signal-to-noise ratio and spatial resolution) of beacon data. We then increase the time resolution of enhanced beacon images through learned interpolation to match science data's 40-minute resolution. We maximize information coherence between consecutive frames with adapted model architecture and loss functions through the different steps. The improved beacon images are comparable to science data, showing better CME visibility than the original beacon data. Furthermore, we compare CMEs tracked in beacon, enhanced beacon, and science images. The tracks extracted from enhanced beacon data are closer to those from science images, with a mean average error of $\sim 0.5 ^\circ$ of elongation compared to $1^\circ$ with original beacon data. The work presented in this paper paves the way for its application to forthcoming missions such as Vigil and PUNCH. △ Less

Submitted 19 March, 2025; originally announced March 2025.

Comments: 24 pages, 11 figures, 1 tables, submitted to AGU Space Weather on 14th Marc 2025

Detectorless 3D terahertz imaging: achieving subwavelength resolution with reflectance confocal interferometric microscopy

Authors: Jorge Silva, Martin Plöschner, Karl Bertling, Mukund Ghantala, Tim Gillespie, Jari Torniainen, Jeremy Herbert, Yah Leng Lim, Thomas Taimre, Xiaoqiong Qi, Bogdan C. Donose, Tao Zhou, Hoi-Shun Lui, Dragan Indjin, Yingjun Han, Lianhe Li, Alexander Valavanis, Edmund H. Linfield, A. Giles Davies, Paul Dean, Aleksandar D. Rakić

Abstract: Terahertz imaging holds great potential for non-destructive material inspection, but practical implementation has been limited by resolution constraints. In this study, we present a single-pixel THz imaging system based on a confocal microscope architecture, utilising a quantum cascade laser as both transmitter and phase-sensitive receiver. Our approach integrates laser feedback interferometry det… ▽ More Terahertz imaging holds great potential for non-destructive material inspection, but practical implementation has been limited by resolution constraints. In this study, we present a single-pixel THz imaging system based on a confocal microscope architecture, utilising a quantum cascade laser as both transmitter and phase-sensitive receiver. Our approach integrates laser feedback interferometry detection to achieve a two-fold improvement in lateral resolution and a two-order-of-magnitude enhancement in axial resolution over conventional imaging through precise interferometric phase measurements. This translates to a lateral resolution near $λ/2$ and a depth of focus better than $λ/5$, significantly outperforming traditional confocal systems. The system can produce a 0.5 Mpixel image in under two minutes, surpassing both raster-scanning single-pixel and multipixel focal-plane array-based imagers. Coherent operation enables simultaneous amplitude and phase image acquisition, and a custom visualisation method links amplitude to image saturation and phase to hue, enhancing material characterisation. A 3D tomographic analysis of a silicon chip reveals subwavelength features, demonstrating the system's potential for high-resolution THz imaging and material analysis. This work sets a new benchmark for THz imaging, overcoming key challenges and opening up transformative possibilities for non-destructive material inspection and characterisation. △ Less

Submitted 19 March, 2025; v1 submitted 24 December, 2024; originally announced December 2024.

Ultra-sensitive heterodyne detection at room temperature in the atmospheric windows

Authors: Mohammadreza Saemian, Livia Del Balzo, Djamal Gacemi, Yanko Todorov, Etienne Rodriguez, Olivier Lopez, Benoît Darquié, Lianhe Li, Alexander Giles Davies, Edmund Linfield, Angela Vasanelli, Carlo Sirtori

Abstract: We report room temperature heterodyne detection of a quantum cascade laser beaten with a local oscillator on a unipolar quantum photodetector in two different atmospheric windows, at 4.8 $μ$m and 9 $μ$m. A noise equivalent power of few pW is measured by employing an active stabilization technique in which the local oscillator and the signal are locked in phase. The measured heterodyne noise equiva… ▽ More We report room temperature heterodyne detection of a quantum cascade laser beaten with a local oscillator on a unipolar quantum photodetector in two different atmospheric windows, at 4.8 $μ$m and 9 $μ$m. A noise equivalent power of few pW is measured by employing an active stabilization technique in which the local oscillator and the signal are locked in phase. The measured heterodyne noise equivalent power is six orders of magnitude lower than that obtained with direct detection. △ Less

Submitted 23 December, 2024; originally announced December 2024.

Comments: 18 pages, 10 figures, 6 tables

Journal ref: Nanophotonics 13, 1765-1772 (2024)

Comparing NASA Discovery and New Frontiers Class Mission Concepts for the Io Volcano Observer (IVO)

Authors: Christopher W. Hamilton, Alfred S. McEwen, Laszlo Keszthelyi, Lynn M. Carter, Ashley G. Davies, Katherine de Kleer, Kandis Lea Jessup, Xianzhe Jia, James T. Keane, Kathleen Mandt, Francis Nimmo, Chris Paranicas, Ryan S. Park, Jason E. Perry, Anne Pommier, Jani Radebaugh, Sarah S. Sutton, Audrey Vorburger, Peter Wurz, Cauê Borlina, Amanda F. Haapala, Daniella N. DellaGiustina, Brett W. Denevi, Sarah M. Hörst, Sascha Kempf , et al. (9 additional authors not shown)

Abstract: Jupiter's moon Io is a highly compelling target for future exploration that offers critical insight into tidal dissipation processes and the geology of high heat flux worlds, including primitive planetary bodies, such as the early Earth, that are shaped by enhanced rates of volcanism. Io is also important for understanding the development of volcanogenic atmospheres and mass-exchange within the Ju… ▽ More Jupiter's moon Io is a highly compelling target for future exploration that offers critical insight into tidal dissipation processes and the geology of high heat flux worlds, including primitive planetary bodies, such as the early Earth, that are shaped by enhanced rates of volcanism. Io is also important for understanding the development of volcanogenic atmospheres and mass-exchange within the Jupiter System. However, fundamental questions remain about the state of Io's interior, surface, and atmosphere, as well as its role in the evolution of the Galilean satellites. The Io Volcano Observer (IVO) would address these questions by achieving the following three key goals: (A) Determine how and where tidal heat is generated inside Io; (B) Understand how tidal heat is transported to the surface of Io; and (C) Understand how Io is evolving. IVO was selected for Phase A study through the NASA Discovery program in 2020 and, in anticipation of a New Frontiers 5 opportunity, an enhanced IVO-NF mission concept was advanced that would increase the Baseline mission from 10 flybys to 20, with an improved radiation design; employ a Ka-band communications to double IVO's total data downlink; add a wide angle camera for color and stereo mapping; add a dust mass spectrometer; and lower the altitude of later flybys to enable new science. This study compares and contrasts the mission architecture, instrument suite, and science objectives for Discovery (IVO) and New Frontiers (IVO-NF) missions to Io, and advocates for continued prioritization of Io as an exploration target for New Frontiers. △ Less

Submitted 14 August, 2024; originally announced August 2024.

Comments: Submitted to The Planetary Science Journal for peer-review on 14 August 2024

Sculpting harmonic comb states in terahertz quantum cascade lasers by controlled engineering

Authors: Elisa Riccardi, M. Alejandro Justo Guerrero, Valentino Pistore, Lukas Seitner, Christian Jirauschek, Lianhe Li, A. Giles Davies, Edmund H. Linfield, Miriam S. Vitiello

Abstract: Optical frequency combs (FCs), that establish a rigid phase-coherent link between the microwave and optical domains of the electromagnetic spectrum, are emerging as a key high-precision tools for the development of quantum technology platforms. These include potential applications for communication, computation, information, sensing and metrology, and can extend from the near-infrared with micro-r… ▽ More Optical frequency combs (FCs), that establish a rigid phase-coherent link between the microwave and optical domains of the electromagnetic spectrum, are emerging as a key high-precision tools for the development of quantum technology platforms. These include potential applications for communication, computation, information, sensing and metrology, and can extend from the near-infrared with micro-resonator combs, up to the technologically attractive terahertz (THz) frequency range, with powerful and miniaturized quantum cascade laser (QCL) FCs. The recently discovered ability of the QCLs to produce a harmonic frequency comb (HFC), a FC with large intermodal spacings, has attracted new interest in these devices for both applications and fundamental physics, particularly for the generation of THz tones of high spectral purity for high data rate wireless communication networks, for radiofrequency arbitrary waveform synthesis, and for the development of quantum key distributions. The controlled generation of harmonic states of a specific order remains, however, elusive in THz QCLs. Here we devise a strategy to obtain broadband HFC emission of a pre-defined order in QCL, by design. By patterning n regularly spaced defects on the top-surface of a double-metal Fabry-Perot QCL, we demonstrate harmonic comb emission with modes spaced by (n+1) free spectral range and with a record optical power/mode of ~270 $μW$. △ Less

Submitted 6 November, 2023; originally announced November 2023.

Shortest path or random walks? A framework for path weights in network meta-analysis

Authors: Gerta Rücker, Theodoros Papakonstantinou, Adriani Nikolakopoulou, Guido Schwarzer, Tobias Galla, Annabel L. Davies

Abstract: Quantifying the contributions, or weights, of comparisons or single studies to the estimates in a network meta-analysis (NMA) is an active area of research. We extend this to the contributions of paths to NMA estimates. We present a general framework, based on the path-design matrix, that describes the problem of finding path contributions as a linear equation. The resulting solutions may have neg… ▽ More Quantifying the contributions, or weights, of comparisons or single studies to the estimates in a network meta-analysis (NMA) is an active area of research. We extend this to the contributions of paths to NMA estimates. We present a general framework, based on the path-design matrix, that describes the problem of finding path contributions as a linear equation. The resulting solutions may have negative coefficients. We show that two known approaches, called shortestpath and randomwalk, are special solutions of this equation, and both meet an optimization criterion, as they minimize the sum of absolute path contributions. In general, there is an infinite space of solutions, which can be identified using the generalized inverse (Moore-Penrose pseudoinverse). We consider two further special approaches. For complex networks we find that shortestpath is superior with respect to run time and variability, compared to the other approaches, and is thus recommended in practice. The path-weights framework also has the potential to answer more general research questions in network meta-analysis. △ Less

Submitted 10 August, 2023; originally announced August 2023.

Comments: Preprint, 17 pages, 7 figures. Submitted to Statistics in Medicine

Using Solar Orbiter as an upstream solar wind monitor for real time space weather predictions

Authors: R. Laker, T. S. Horbury, H. O'Brien, E. J. Fauchon-Jones, V. Angelini, N. Fargette, T. Amerstorfer, M. Bauer, C. Möstl, E. E. Davies, J. A. Davies, R. Harrison, D. Barnes, M. Dumbović

Abstract: Coronal mass ejections (CMEs) can create significant disruption to human activities and systems on Earth, much of which can be mitigated with prior warning of the upstream solar wind conditions. However, it is currently extremely challenging to accurately predict the arrival time and internal structure of a CME from coronagraph images alone. In this study, we take advantage of a rare opportunity t… ▽ More Coronal mass ejections (CMEs) can create significant disruption to human activities and systems on Earth, much of which can be mitigated with prior warning of the upstream solar wind conditions. However, it is currently extremely challenging to accurately predict the arrival time and internal structure of a CME from coronagraph images alone. In this study, we take advantage of a rare opportunity to use Solar Orbiter, at 0.5\,AU upstream of Earth, as an upstream solar wind monitor. We were able to use real time science quality magnetic field measurements, taken only 12 minutes earlier, to predict the arrival time of a CME prior to reaching Earth. We used measurements at Solar Orbiter to constrain an ensemble of simulation runs from the ELEvoHI model, reducing the uncertainty in arrival time from 10.4\,hours to 2.5\,hours. There was also an excellent agreement in the $B_z$ profile between Solar Orbiter and Wind spacecraft, despite being separated by 0.5\,AU and 10$^{\circ}$ longitude. Therefore, we show that it is possible to predict not only the arrival time of a CME, but the sub-structure of the magnetic field within it, over a day in advance. The opportunity to use Solar Orbiter as an upstream solar wind monitor will repeat once a year, which should further help assess the efficacy upstream in-situ measurements in real time space weather forecasting. △ Less

Submitted 25 February, 2024; v1 submitted 3 July, 2023; originally announced July 2023.

Journal ref: Space Weather, 22, e2023SW003628 (2024)

L1 and off Sun-Earth line visible-light imaging of Earth-directed CMEs: An analysis of inconsistent observations

Authors: Richard A. Harrison, Jackie A. Davies, David Barnes, Christian Möstl

Abstract: The efficacy of coronal mass ejection (CME) observations as a key input to space weather forecasting is explored by comparing on and off Sun-Earth line observations from the ESA/NASA SOHO and NASA STEREO spacecraft. A comparison is made of CME catalogues based on L1 coronagraph imagery and off Sun-Earth line coronagraph and heliospheric imager (HI) observations, for the year 2011. Analysis reveals… ▽ More The efficacy of coronal mass ejection (CME) observations as a key input to space weather forecasting is explored by comparing on and off Sun-Earth line observations from the ESA/NASA SOHO and NASA STEREO spacecraft. A comparison is made of CME catalogues based on L1 coronagraph imagery and off Sun-Earth line coronagraph and heliospheric imager (HI) observations, for the year 2011. Analysis reveals inconsistencies in the identification of a number of potentially Earth-directed CMEs. The catalogues reflect our ability to identify and characterise CMEs, so any discrepancies can impact our prediction of Earth-directed CMEs. We show that 15 CMEs, which were observed by STEREO, that had estimated directions compatible with Earth-directed events, had no identified halo/partial halo counterpart listed in the L1 coronagraph CME catalogue. In-situ data confirms that for 9 of these there was a consistent L1 Interplanetary CME (ICME). The number of such "discrepant" events is significant compared to the number of ICMEs recorded at L1 in 2011, stressing the need to address space weather monitoring capabilities, particularly with the inclusion of off Sun-Earth line observation. While the study provides evidence that some halo CMEs are simply not visible in near-Earth coronagraph imagery, there is evidence that some halo CMEs viewed from L1 are compromised by preceding CME remnants or the presence of multiple-CMEs. This underlines (1) the value of multiple vantage point CME observation, and (2) the benefit of off Sun-Earth line platform heliospheric imaging, and coronagraph imaging, for the efficient identification and tracking of Earth-directed events. △ Less

Submitted 11 April, 2023; originally announced April 2023.

Comments: 36 pages, 6 figures, in press at AGU Space Weather, 2023

Detection of strong light-matter interaction in a single nano-cavity with a thermal transducer

Authors: Mario Malerba, Simone Sotgiu, Andrea Schirato, Leonetta Baldassarre, Raymond Gillibert, Valeria Giliberti, Mathieu Jeannin, Jean-Michel Manceau, Lianhe Li, Alexander Giles Davies, Edmund H. Linfield, Alessandro Alabastri, Michele Ortolani, Raffaele Colombelli

Abstract: Recently, the concept of strong light-matter coupling has been demonstrated in semiconductor structures, and it is poised to revolutionize the design and implementation of components, including solid state lasers and detectors. We demonstrate an original nanospectroscopy technique that permits to study the light-matter interaction in single subwavelength-sized nano-cavities where far-field spectro… ▽ More Recently, the concept of strong light-matter coupling has been demonstrated in semiconductor structures, and it is poised to revolutionize the design and implementation of components, including solid state lasers and detectors. We demonstrate an original nanospectroscopy technique that permits to study the light-matter interaction in single subwavelength-sized nano-cavities where far-field spectroscopy is not possible using conventional techniques. We inserted a thin ($\approx$ 150 nm) polymer layer with negligible absorption in the mid-IR (5 $μ$m < $λ$ < 12 $μ$m) inside a metal-insulator-metal resonant cavity, where a photonic mode and the intersubband transition of a semiconductor quantum well are strongly coupled. The intersubband transition peaks at $λ$ = 8.3 $μ$m, and the nano-cavity is overall 270 nm thick. Acting as a non-perturbative transducer, the polymer layer introduces only a limited alteration of the optical response while allowing to reveal the optical power absorbed inside the concealed cavity. Spectroscopy of the cavity losses is enabled by the polymer thermal expansion due to heat dissipation in the active part of the cavity, and performed using an atomic force microscope (AFM). This innovative approach allows the typical anticrossing characteristic of the polaritonic dispersion to be identified in the cavity loss spectra at the single nano-resonator level. Results also suggest that near-field coupling of the external drive field to the top metal patch mediated by a metal-coated AFM probe tip is possible, and it enables the near-field mapping of the cavity mode symmetry including in the presence of strong light-matter interaction. △ Less

Submitted 27 November, 2022; originally announced November 2022.

Ultrashort pulse generation from a graphene-coupled passively mode-locked terahertz laser

Authors: Elisa Riccardi, Valentino Pistore, Seonggil Kang, Lukas Seitner, Anna De Vetter, Christian Jirauschek, Juliette Mangeney, Lianhe Li, A. Giles Davies, Edmund H. Linfield, Andrea C. Ferrari, Sukhdeep S. Dhillon, Miriam S. Vitiello

Abstract: The generation of stable trains of ultra-short (fs-ps), terahertz (THz)-frequency radiation pulses, with large instantaneous intensities, is an underpinning requirement for the investigation of light-matter interactions, for metrology and for ultra-high-speed communications. In solid-state electrically-pumped lasers, the primary route for generating short pulses is through passive mode-locking. Ho… ▽ More The generation of stable trains of ultra-short (fs-ps), terahertz (THz)-frequency radiation pulses, with large instantaneous intensities, is an underpinning requirement for the investigation of light-matter interactions, for metrology and for ultra-high-speed communications. In solid-state electrically-pumped lasers, the primary route for generating short pulses is through passive mode-locking. However, this has not yet been achieved in the THz range, defining one of the longest standing goals over the last two decades. In fact, the realization of passive mode-locking has long been assumed to be inherently hindered by the fast recovery times associated with the intersubband gain of THz lasers. Here, we demonstrate a self-starting miniaturized ultra-short pulse THz laser, exploiting an original device architecture that includes the surface patterning of multilayer-graphene saturable absorbers distributed along the entire cavity of a double-metal semiconductor 2.30-3.55 THz wire laser. Self-starting pulsed emission with 4.0-ps-long pulses in a compact, all-electronic, all-passive and inexpensive configuration is demonstrated. △ Less

Submitted 21 September, 2022; originally announced September 2022.

Comments: 20 pages, 4 figures

10 Gbit/s free space data transmission at 9 $μ$m wavelength with unipolar quantum optoelectronics

Authors: Hamza Dely, Thomas Bonazzi, Olivier Spitz, Etienne Rodriguez, Djamal Gacemi, Yanko Todorov, Konstantinos Pantzas, Grégoire Beaudoin, Isabelle Sagnes, Lianhe Li, Alexander Davies, Edmund Linfield, Frédéric Grillot, Angela Vasanelli, Carlo Sirtori

Abstract: The realization of high-frequency unipolar quantum optoelectronic devices enables the demonstration of high bitrate free space data transmission in the second atmospheric window. Data-bits are written onto the laser emission using a large bandwidth amplitude modulator that operates by shifting the absorption of an optical transition in and out of the laser frequency. The realization of high-frequency unipolar quantum optoelectronic devices enables the demonstration of high bitrate free space data transmission in the second atmospheric window. Data-bits are written onto the laser emission using a large bandwidth amplitude modulator that operates by shifting the absorption of an optical transition in and out of the laser frequency. △ Less

Submitted 13 October, 2021; originally announced October 2021.

Multipoint interplanetary coronal mass ejections observed with Solar Orbiter, BepiColombo, Parker Solar Probe, Wind and STEREO-A

Authors: C. Möstl, A. J. Weiss, M. A. Reiss, T. Amerstorfer, R. L. Bailey, J. Hinterreiter, M. Bauer, D. Barnes, J. A. Davies, R. A. Harrison, J. L. Freiherr von Forstner, E. E. Davies, D. Heyner, T. Horbury, S. D. Bale

Abstract: We report the result of the first search for multipoint in situ and imaging observations of interplanetary coronal mass ejections (ICMEs) starting with the first Solar Orbiter (SolO) data in 2020 April - 2021 April. A data exploration analysis is performed including visualizations of the magnetic field and plasma observations made by the five spacecraft SolO, BepiColombo, Parker Solar Probe (PSP),… ▽ More We report the result of the first search for multipoint in situ and imaging observations of interplanetary coronal mass ejections (ICMEs) starting with the first Solar Orbiter (SolO) data in 2020 April - 2021 April. A data exploration analysis is performed including visualizations of the magnetic field and plasma observations made by the five spacecraft SolO, BepiColombo, Parker Solar Probe (PSP), Wind and STEREO-A, in connection with coronagraph and heliospheric imaging observations from STEREO-A/SECCHI and SOHO/LASCO. We identify ICME events that could be unambiguously followed with the STEREO-A heliospheric imagers during their interplanetary propagation to their impact at the aforementioned spacecraft, and look for events where the same ICME is seen in situ by widely separated spacecraft. We highlight two events: (1) a small streamer blowout CME on 2020 June 23 observed with a triple lineup by PSP, BepiColombo and Wind, guided by imaging with STEREO-A, and (2) the first fast CME of solar cycle 25 ($ \approx 1600$ km s$^{-1}$) on 2020 November 29 observed in situ by PSP and STEREO-A. These results are useful for modeling the magnetic structure of ICMEs and the interplanetary evolution and global shape of their flux ropes and shocks, and for studying the propagation of solar energetic particles. The combined data from these missions are already turning out to be a treasure trove for space weather research and are expected to become even more valuable with an increasing number of ICME events expected during the rise and maximum of solar cycle 25. △ Less

Submitted 4 January, 2022; v1 submitted 15 September, 2021; originally announced September 2021.

Comments: in press at ApJ Letters (submitted 2021 September 15, revised 2021 November 24, accepted 2021 December 9). 11 pages, 3 figures, 1 table

Predicting CMEs using ELEvoHI with STEREO-HI beacon data

Authors: Maike Bauer, Tanja Amerstorfer, Jürgen Hinterreiter, Andreas J. Weiss, Jackie A. Davies, Christian Möstl, Ute V. Amerstorfer, Martin A. Reiss, Richard A. Harrison

Abstract: Being able to accurately predict the arrival of coronal mass ejections (CMEs) at Earth has been a long-standing problem in space weather research and operations. In this study, we use the ELlipse Evolution model based on Heliospheric Images (ELEvoHI) to predict the arrival time and speed of 10 CME events that were observed by HI on the STEREO-A spacecraft between 2010 and 2020. Additionally, we in… ▽ More Being able to accurately predict the arrival of coronal mass ejections (CMEs) at Earth has been a long-standing problem in space weather research and operations. In this study, we use the ELlipse Evolution model based on Heliospheric Images (ELEvoHI) to predict the arrival time and speed of 10 CME events that were observed by HI on the STEREO-A spacecraft between 2010 and 2020. Additionally, we introduce a Python tool for downloading and preparing STEREO-HI data, as well as tracking CMEs. In contrast to most previous studies, we use not only science data, which has a relatively high spatial and temporal resolution, but also low-quality beacon data, which is - in contrast to science data - provided in real-time by the STEREO-A spacecraft. We do not use data from the STEREO-B spacecraft. We get a mean absolute error of 8.81 $\pm$ 3.18 h / 59 $\pm$ 31 kms$^{-1}$ for arrival time/speed predictions using science data and 11.36 $\pm$ 8.69 h / 106 $\pm$ 61 kms$^{-1}$ for beacon data. We find that using science data generally leads to more accurate predictions, but using beacon data with the ELEvoHI model is certainly a viable choice in the absence of higher resolution real-time data. We propose that these differences could be minimized if not eliminated altogether if higher quality real-time data was available, either by enhancing the quality of the already available data or coming from a new mission carrying a HI instrument on-board. △ Less

Submitted 7 December, 2021; v1 submitted 18 August, 2021; originally announced August 2021.

Comments: 25 pages, 9 figures, submitted to AGU Space Weather 2021 August 9, published in Space Weather 2021 December 3

Journal ref: 2021, Space Weather, Volume 19, Issue 12

A "Janus" double sided mid-IR photodetector based on a MIM architecture

Authors: Mario Malerba, Mathieu Jeannin, Stefano Pirotta, Lianhe Li, Alexander Giles Davies, Edmund Linfield, Adel Bousseksou, Jean-Michel Manceau, Raffaele Colombelli

Abstract: We present a mid-IR ($λ\approx$ 8.3 $μ$m) quantum well infrared photodetector (QWIP) fabricated on a mid-IR transparent substrate, allowing photodetection with illumination from either the front surface or through the substrate. The device is based on a 400 nm-thick GaAs/AlGaAs semiconductor QWIP heterostructure enclosed in a metal-insulator-metal (MIM) cavity and hosted on a mid-IR transparent Zn… ▽ More We present a mid-IR ($λ\approx$ 8.3 $μ$m) quantum well infrared photodetector (QWIP) fabricated on a mid-IR transparent substrate, allowing photodetection with illumination from either the front surface or through the substrate. The device is based on a 400 nm-thick GaAs/AlGaAs semiconductor QWIP heterostructure enclosed in a metal-insulator-metal (MIM) cavity and hosted on a mid-IR transparent ZnSe substrate. Metallic stripes are symmetrically patterned by e-beam lithography on both sides of the active region. The detector spectral coverage spans from $λ\approx 7.15$ $μ$m to $λ\approx 8.7$ $μ$m by changing the stripe width L - from L = 1.0 $μ$m to L = 1.3 $μ$m - thus frequency-tuning the optical cavity mode. Both micro-FTIR passive optical characterizations and photocurrent measurements of the two-port system are carried out. They reveal a similar spectral response for the two detector ports, with an experimentally measured T$_{BLIP}$ of $\approx$ 200K. △ Less

Submitted 5 August, 2021; originally announced August 2021.

Comments: Copyright 2021 Mario Malerba, Mathieu Jeannin, Stefano Pirotta, Lianhe Li, Alexander Giles Davies, Edmund Linfield, Adel Bousseksou, Jean-Michel Manceau and Raffaele Colombelli. This article is distributed under a Creative Commons Attribution (CC BY) License. The following article has been submitted to APL Photonics. After it is published, it will be found at https://aip.scitation.org/journal/app

Network meta-analysis and random walks

Authors: Annabel L. Davies, Theodoros Papakonstantinou, Adriani Nikolakopoulou, Gerta Rücker, Tobias Galla

Abstract: Network meta-analysis (NMA) is a central tool for evidence synthesis in clinical research. The results of an NMA depend critically on the quality of evidence being pooled. In assessing the validity of an NMA, it is therefore important to know the proportion contributions of each direct treatment comparison to each network treatment effect. The construction of proportion contributions is based on t… ▽ More Network meta-analysis (NMA) is a central tool for evidence synthesis in clinical research. The results of an NMA depend critically on the quality of evidence being pooled. In assessing the validity of an NMA, it is therefore important to know the proportion contributions of each direct treatment comparison to each network treatment effect. The construction of proportion contributions is based on the observation that each row of the hat matrix represents a so-called 'evidence flow network' for each treatment comparison. However, the existing algorithm used to calculate these values is associated with ambiguity according to the selection of paths. In this work we present a novel analogy between NMA and random walks. We use this analogy to derive closed-form expressions for the proportion contributions. A random walk on a graph is a stochastic process that describes a succession of random 'hops' between vertices which are connected by an edge. The weight of an edge relates to the probability that the walker moves along that edge. We use the graph representation of NMA to construct the transition matrix for a random walk on the network of evidence. We show that the net number of times a walker crosses each edge of the network is related to the evidence flow network. By then defining a random walk on the directed evidence flow network, we derive analytically the matrix of proportion contributions. The random-walk approach, in addition to being computationally more efficient, has none of the associated ambiguity of the existing algorithm. △ Less

Submitted 14 June, 2021; originally announced July 2021.

Comments: 34 pages, 8 figures

Chip-scale terahertz frequency combs through integrated intersubband polariton bleaching

Authors: Francesco P. Mezzapesa, Leonardo Viti, Lianhe Li, Valentino Pistore, Sukhdeep Dhillon, A. Giles Davies, Edmund Linfield, Miriam S. Vitiello

Abstract: Quantum cascade lasers (QCLs) represent a fascinating accomplishment of quantum engineering and enable the direct generation of terahertz (THz) frequency radiation from an electrically-biased semiconductor heterostructure. Their large spectral bandwidth, high output powers and quantum-limited linewidths have facilitated the realization of THz pulses by active mode-locking and passive generation of… ▽ More Quantum cascade lasers (QCLs) represent a fascinating accomplishment of quantum engineering and enable the direct generation of terahertz (THz) frequency radiation from an electrically-biased semiconductor heterostructure. Their large spectral bandwidth, high output powers and quantum-limited linewidths have facilitated the realization of THz pulses by active mode-locking and passive generation of optical frequency combs (FCs) through intracavity four-wave-mixing, albeit over a restricted operational regime. Here, we conceive an integrated architecture for the generation of high power (10 mW) THz FCs comprising an ultrafast THz polaritonic reflector, exploiting intersubband cavity polaritons, and a broad bandwidth (2.3-3.8 THz) heterogeneous THz QCL. Quantum cascade lasers (QCLs) represent a fascinating accomplishment of quantum engineering and enable the direct generation of terahertz (THz) frequency radiation from an electrically-biased semiconductor heterostructure. By tuning the group delay dispersion in an integrated geometry, through the exploitation of light induced bleaching of the intersubband-based THz polaritons, we demonstrate spectral reshaping of the QCL emission and stable FC operation over an operational dynamic range of up to 38%, characterized by a single and narrow (down to 700 Hz) intermode beatnote. Our concept provides design guidelines for a new generation of compact, cost-effective, electrically driven chip-scale FC sources based on ultrafast polariton dynamics, paving the way towards the generation of mode locked THz micro-lasers that will strongly impact a broad range of applications in ultrafast sciences, data storage, high-speed communication and spectroscopy. △ Less

Submitted 17 May, 2021; originally announced May 2021.

Comments: 18 Pages, 7 figures, This is the authors' version of the article submitted to Laser & Photonics Reviews and accepted for publication (2021, 2000575)

Journal ref: Laser & Photonics Reviews, lpor.202000575R1, 2021

Towards the Optimisation of Direct Laser Acceleration

Authors: A. E. Hussein, A. V. Arefiev, T. Batson, H. Chen, R. S. Craxton, A. S. Davies, D. H. Froula, Z. Gong, D. Haberberger, Y. Ma, P. M. Nilson, W. Theobald, T. Wang, K. Weichman, G. J. Williams, L. Willingale

Abstract: Experimental measurements using the OMEGA EP laser facility demonstrated direct laser acceleration (DLA) of electron beams to (505 $\pm$ 75) MeV with (140 $\pm$ 30)~nC of charge from a low-density plasma target using a 400 J, picosecond duration pulse. Similar trends of electron energy with target density are also observed in self-consistent two-dimensional particle-in-cell simulations. The intens… ▽ More Experimental measurements using the OMEGA EP laser facility demonstrated direct laser acceleration (DLA) of electron beams to (505 $\pm$ 75) MeV with (140 $\pm$ 30)~nC of charge from a low-density plasma target using a 400 J, picosecond duration pulse. Similar trends of electron energy with target density are also observed in self-consistent two-dimensional particle-in-cell simulations. The intensity of the laser pulse is sufficiently large that the electrons are rapidly expelled from along the laser pulse propagation axis to form a channel. The dominant acceleration mechanism is confirmed to be DLA and the effect of quasi-static channel fields on energetic electron dynamics is examined. A strong channel magnetic field, self-generated by the accelerated electrons, is found to play a comparable role to the transverse electric channel field in defining the boundary of electron motion. △ Less

Submitted 18 January, 2021; originally announced January 2021.

Comments: 21 pages, 7 figures

High temperature metamaterial terahertz quantum detector

Authors: Mathieu Jeannin, Thomas Bonazzi, Djamal Gacemi, Angela Vasanelli, Stéphan Suffit, Lianhe Li, Alexander Giles Davies, Edmund Linfield, Carlo Sirtori, Yanko Todorov

Abstract: We demonstrate a high temperature performance quantum detector of Terahertz (THz) radiation based on three-dimensional metamaterial. The metamaterial unit cell consists of an inductor-capacitor (LC) resonator laterally coupled with antenna elements. The absorbing region, consisting of semiconductor quantum wells is contained in the strongly ultra-subwavelength capacitors of the LC structure. The h… ▽ More We demonstrate a high temperature performance quantum detector of Terahertz (THz) radiation based on three-dimensional metamaterial. The metamaterial unit cell consists of an inductor-capacitor (LC) resonator laterally coupled with antenna elements. The absorbing region, consisting of semiconductor quantum wells is contained in the strongly ultra-subwavelength capacitors of the LC structure. The high radiation loss of the antenna allows strongly increased collection efficiency for the incident THz radiation, while the small effective volume of the LC resonator allows intense light-matter coupling with reduced electrical area. As a result, our detectors operates at much higher temperatures than conventional quantum well detectors demonstrated so far. △ Less

Submitted 21 December, 2020; originally announced December 2020.

Journal ref: Applied Physics Letters 117 (2020) 251102

Precise determination of low energy electronuclear Hamiltonian for LiY$_{1-x}$Ho$_{x}$F$_{4}$

Authors: A. Beckert, R. I. Hermans, M. Grimm, J. R. Freeman, E. H. Linfield, A. G. Davies, M. Müller, H. Sigg, S. Gerber, G. Matmon, G. Aeppli

Abstract: We use complementary optical spectroscopy methods to directly measure the lowest crystal-field energies of the rare-earth quantum magnet LiY$_{1-x}$Ho$_{x}$F$_{4}$, including their hyperfine splittings, with more than 10 times higher resolution than previous work. We are able to observe energy level splittings due to the $^6\mathrm{Li}$ and $^7\mathrm{Li}$ isotopes, as well as non-equidistantly sp… ▽ More We use complementary optical spectroscopy methods to directly measure the lowest crystal-field energies of the rare-earth quantum magnet LiY$_{1-x}$Ho$_{x}$F$_{4}$, including their hyperfine splittings, with more than 10 times higher resolution than previous work. We are able to observe energy level splittings due to the $^6\mathrm{Li}$ and $^7\mathrm{Li}$ isotopes, as well as non-equidistantly spaced hyperfine transitions originating from dipolar and quadrupolar hyperfine interactions. We provide refined crystal field parameters and extract the dipolar and quadrupolar hyperfine constants ${A_J=0.02703\pm0.00003}$ $\textrm{cm}^{-1}$ and ${B= 0.04 \pm0.01}$ $\textrm{cm}^{-1}$, respectively. Thereupon we determine all crystal-field energy levels and magnetic moments of the $^5I_8$ ground state manifold, including the (non-linear) hyperfine corrections. The latter match the measurement-based estimates. The scale of the non-linear hyperfine corrections sets an upper bound for the inhomogeneous line widths that would still allow for unique addressing of a selected hyperfine transition. e.g. for quantum information applications. Additionally, we establish the far-infrared, low-temperature refractive index of LiY$_{1-x}$Ho$_{x}$F$_{4}$. △ Less

Submitted 16 December, 2020; originally announced December 2020.

Comments: 9 pages, 6 Figures, 3 Tables

In situ multi-spacecraft and remote imaging observations of the first CME detected by Solar Orbiter and BepiColombo

Authors: E. E. Davies, C. Möstl, M. J. Owens, A. J. Weiss, T. Amerstorfer, J. Hinterreiter, M. Bauer, R. L. Bailey, M. A. Reiss, R. J. Forsyth, T. S. Horbury, H. O'Brien, V. Evans, V. Angelini, D. Heyner, I. Richter, H-U. Auster, W. Magnes, W. Baumjohann, D. Fischer, D. Barnes, J. A. Davies, R. A. Harrison

Abstract: On 2020 April 19 a coronal mass ejection (CME) was detected in situ by Solar Orbiter at a heliocentric distance of about 0.8 AU. The CME was later observed in situ on April 20th by the Wind and BepiColombo spacecraft whilst BepiColombo was located very close to Earth. This CME presents a good opportunity for a triple radial alignment study, as the spacecraft were separated by less than 5$^\circ$ i… ▽ More On 2020 April 19 a coronal mass ejection (CME) was detected in situ by Solar Orbiter at a heliocentric distance of about 0.8 AU. The CME was later observed in situ on April 20th by the Wind and BepiColombo spacecraft whilst BepiColombo was located very close to Earth. This CME presents a good opportunity for a triple radial alignment study, as the spacecraft were separated by less than 5$^\circ$ in longitude. The source of the CME, which was launched on April 15th, was an almost entirely isolated streamer blowout. STEREO-A observed the event remotely from -75.1$^\circ$ longitude, which is an exceptionally well suited viewpoint for heliospheric imaging of an Earth directed CME. The configuration of the four spacecraft has provided an exceptionally clean link between remote imaging and in situ observations of the CME. We have used the in situ observations of the CME at Solar Orbiter, Wind, and BepiColombo, and the remote observations of the CME at STEREO-A in combination with flux rope models to determine the global shape of the CME and its evolution as it propagated through the inner heliosphere. A clear flattening of the CME cross-section has been observed by STEREO-A, and further confirmed by comparing profiles of the flux rope models to the in situ data, where the distorted flux rope cross-section qualitatively agrees most with in situ observations of the magnetic field at Solar Orbiter. Comparing in situ observations of the magnetic field between spacecraft, we find that the dependence of the maximum (mean) magnetic field strength decreases with heliocentric distance as $r^{-1.24 \pm 0.50}$ ($r^{-1.12 \pm 0.14}$), in disagreement with previous studies. Further assessment of the axial and poloidal magnetic field strength dependencies suggests that the expansion of the CME is likely neither self-similar nor cylindrically symmetric. △ Less

Submitted 23 February, 2021; v1 submitted 14 December, 2020; originally announced December 2020.

Journal ref: A&A 656, A2 (2021)

Tunable, grating-gated, graphene-on-polyimide terahertz modulators

Authors: Alessandra Di Gaspare, Eva A. A. Pogna, Luca Salemi, Osman Balci, Alisson R. Cadore, Sachin M. Shinde, Lianhe Li, Cinzia di Franco, A. Giles Davies, Edmund Linfield, Andrea C. Ferrari, Gaetano Scamarcio, Miriam S. Vitiello

Abstract: We present an electrically switchable graphene terahertz (THz) modulator with a tunable-by-design optical bandwidth and we exploit it to compensate the cavity dispersion of a quantum cascade laser (QCL). Electrostatic gating is achieved by a metal-grating used as a gate electrode, with an HfO2/AlOx gate dielectric on top. This is patterned on a polyimide layer, which acts as a quarter wave resonan… ▽ More We present an electrically switchable graphene terahertz (THz) modulator with a tunable-by-design optical bandwidth and we exploit it to compensate the cavity dispersion of a quantum cascade laser (QCL). Electrostatic gating is achieved by a metal-grating used as a gate electrode, with an HfO2/AlOx gate dielectric on top. This is patterned on a polyimide layer, which acts as a quarter wave resonance cavity, coupled with an Au reflector underneath. We get 90% modulation depth of the intensity, combined with a 20 kHz electrical bandwidth in the 1.9 _ 2.7 THz range. We then integrate our modulator with a multimode THz QCL. By adjusting the modulator operational bandwidth, we demonstrate that the graphene modulator can partially compensates the QCL cavity dispersion, resulting in an integrated laser behaving as a stable frequency comb over 35% of the laser operational range, with 98 equidistant optical modes and with a spectral coverage of ~ 1.2 THz. This has significant potential for frontier applications in the terahertz, as tunable transformation-optics devices, active photonic components, adaptive and quantum optics, and as a metrological tool for spectroscopy at THz frequencies. △ Less

Submitted 22 November, 2020; originally announced December 2020.

Comments: 22 pages, 6 figures

Terahertz frequency combs exploiting an on-chip solution processed graphene-quantum cascade laser coupled-cavity architecture

Authors: F. P. Mezzapesa, K. Garrasi, J. Schmidt, L. Salemi, V. Pistore, L. Li, A. G. Davies, E. H. Linfield, M. Riesch, C. Jirauschek, T. Carey, F. Torrisi, A. C. Ferrari, M. S. Vitiello

Abstract: The ability to engineer quantum-cascade-lasers (QCLs) with ultrabroad gain spectra and with a full compensation of the group velocity dispersion, at Terahertz (THz) frequencies, is a fundamental need for devising monolithic and miniaturized optical frequency-comb-synthesizers (FCS) in the far-infrared. In a THz QCL four-wave mixing, driven by the intrinsic third-order susceptibility of the intersu… ▽ More The ability to engineer quantum-cascade-lasers (QCLs) with ultrabroad gain spectra and with a full compensation of the group velocity dispersion, at Terahertz (THz) frequencies, is a fundamental need for devising monolithic and miniaturized optical frequency-comb-synthesizers (FCS) in the far-infrared. In a THz QCL four-wave mixing, driven by the intrinsic third-order susceptibility of the intersubband gain medium, self-lock the optical modes in phase, allowing stable comb operation, albeit over a restricted dynamic range (~ 20% of the laser operational range). Here, we engineer miniaturized THz FCSs comprising a heterogeneous THz QCL integrated with a tightly-coupled on-chip solution-processed graphene saturable-absorber reflector that preserves phase-coherence between lasing modes even when four-wave mixing no longer provides dispersion compensation. This enables a high-power (8 mW) FCS with over 90 optical modes to be demonstrated, over more than 55% of the laser operational range. Furthermore, stable injection-locking is showed, paving the way to impact a number of key applications, including high-precision tuneable broadband-spectroscopy and quantum-metrology. △ Less

Submitted 23 November, 2020; originally announced November 2020.

Comments: 31 pages, 11 figures, to be published in ACS Photonics

The high helium abundance and charge states of the interplanetary CME and its material source on the Sun

Authors: Hui Fu, R. A. Harrison, J. A. Davies, LiDong Xia, XiaoShuai Zhu, Bo Li, ZhengHua Huang, D. Barnes

Abstract: Identifying the source of the material within coronal mass ejections (CMEs) and understanding CME onset mechanisms are fundamental issues in solar and space physics. Parameters relating to plasma composition, such as charge states and He abundance (\ahe), may be different for plasmas originating from differing processes or regions on the Sun. Thus, it is crucial to examine the relationship between… ▽ More Identifying the source of the material within coronal mass ejections (CMEs) and understanding CME onset mechanisms are fundamental issues in solar and space physics. Parameters relating to plasma composition, such as charge states and He abundance (\ahe), may be different for plasmas originating from differing processes or regions on the Sun. Thus, it is crucial to examine the relationship between in-situ measurements of CME composition and activity on the Sun. We study the CME that erupted on 2014 September 10, in association with an X1.6 flare, by analyzing AIA imaging and IRIS spectroscopic observations and its in-situ signatures detected by Wind and ACE. We find that during the slow expansion and intensity increase of the sigmoid, plasma temperatures of 9 MK, and higher, first appear at the footpoints of the sigmoid, associated with chromospheric brightening. Then the high-temperature region extends along the sigmoid. IRIS observations confirm that this extension is caused by transportation of hot plasma upflow. Our results show that chromospheric material can be heated to 9 MK, and above, by chromospheric evaporation at the sigmoid footpoints before flare onset. The heated chromospheric material can transport into the sigmoidal structure and supply mass to the CME. The aforementioned CME mass supply scenario provides a reasonable explanation for the detection of high charge states and elevated \ahe\ in the associated ICME. The observations also demonstrate that the quasi-steady evolution in the precursor phase is dominated by magnetic reconnection between the rising flux rope and the overlying magnetic field structure. △ Less

Submitted 20 August, 2020; originally announced August 2020.

Comments: 10 pages, 5 figures, accepted for publication in ApJL

Evaluation of CME Arrival Prediction Using Ensemble Modeling Based on Heliospheric Imaging Observations

Authors: Tanja Amerstorfer, Jürgen Hinterreiter, Martin A. Reiss, Christian Möstl, Jackie A. Davies, Rachel L. Bailey, Andreas J. Weiss, Mateja Dumbović, Maike Bauer, Ute V. Amerstorfer, Richard A. Harrison

Abstract: In this study, we evaluate a coronal mass ejection (CME) arrival prediction tool that utilizes the wide-angle observations made by STEREO's heliospheric imagers (HI). The unsurpassable advantage of these imagers is the possibility to observe the evolution and propagation of a CME from close to the Sun out to 1 AU and beyond. We believe that by exploiting this capability, instead of relying on coro… ▽ More In this study, we evaluate a coronal mass ejection (CME) arrival prediction tool that utilizes the wide-angle observations made by STEREO's heliospheric imagers (HI). The unsurpassable advantage of these imagers is the possibility to observe the evolution and propagation of a CME from close to the Sun out to 1 AU and beyond. We believe that by exploiting this capability, instead of relying on coronagraph observations only, it is possible to improve today's CME arrival time predictions. The ELlipse Evolution model based on HI observations (ELEvoHI) assumes that the CME frontal shape within the ecliptic plane is an ellipse, and allows the CME to adjust to the ambient solar wind speed, i.e. it is drag-based. ELEvoHI is used to perform ensemble simulations by varying the CME frontal shape within given boundary conditions that are consistent with the observations made by HI. In this work, we evaluate different set-ups of the model by performing hindcasts for 15 well-defined isolated CMEs that occurred when STEREO was near L4/5, between the end of 2008 and the beginning of 2011. In this way, we find a mean absolute error of between $6.2\pm7.9$ h and $9.9\pm13$ h depending on the model set-up used. ELEvoHI is specified for using data from future space weather missions carrying HIs located at L5 or L1. It can also be used with near real-time STEREO-A HI beacon data to provide CME arrival predictions during the next $\sim7$ years when STEREO-A is observing the Sun-Earth space. △ Less

Submitted 16 February, 2021; v1 submitted 6 August, 2020; originally announced August 2020.

Comments: 25 pages, 9 figures, 2 tables; This article also appears in: Heliophysics and Space Weather Studies from the Sun-Earth Lagrange Points

Journal ref: AGU Space Weather, 2021, Volume19, Issue 1

CMEs in the Heliosphere: III. A Statistical Analysis of the Kinematic Properties Derived from Stereoscopic Geometrical Modelling Techniques Applied to CMEs Detected in the Heliosphere from 2008 to 2014 by STEREO/HI-1

Authors: D. Barnes, J. A. Davies, R. A. Harrison, J. P. Byrne, C. H. Perry, V. Bothmer, J. P. Eastwood, P. T. Gallagher, E. K. J. Kilpua, C. Möstl, L. Rodriguez, A. P. Rouillard, D. Odstrcil

Abstract: We present an analysis of coronal mass ejections (CMEs) observed by the Heliospheric Imagers (HIs) on board NASA's Solar Terrestrial Relations Observatory (STEREO) spacecraft. Between August 2008 and April 2014 we identify 273 CMEs that are observed simultaneously, by the HIs on both spacecraft. For each CME, we track the observed leading edge, as a function of time, from both vantage points, and… ▽ More We present an analysis of coronal mass ejections (CMEs) observed by the Heliospheric Imagers (HIs) on board NASA's Solar Terrestrial Relations Observatory (STEREO) spacecraft. Between August 2008 and April 2014 we identify 273 CMEs that are observed simultaneously, by the HIs on both spacecraft. For each CME, we track the observed leading edge, as a function of time, from both vantage points, and apply the Stereoscopic Self-Similar Expansion (SSSE) technique to infer their propagation throughout the inner heliosphere. The technique is unable to accurately locate CMEs when their observed leading edge passes between the spacecraft, however, we are able to successfully apply the technique to 151, most of which occur once the spacecraft separation angle exceeds 180 degrees, during solar maximum. We find that using a small half-width to fit the CME can result in observed acceleration to unphysically high velocities and that using a larger half-width can fail to accurately locate the CMEs close to the Sun because the method does not account for CME over-expansion in this region. Observed velocities from SSSE are found to agree well with single-spacecraft (SSEF) analysis techniques applied to the same events. CME propagation directions derived from SSSE and SSEF analysis agree poorly because of known limitations present in the latter. This work was carried out as part of the EU FP7 HELCATS (Heliospheric Cataloguing, Analysis and Techniques Service) project (http://www.helcats-fp7.eu/). △ Less

Submitted 26 June, 2020; originally announced June 2020.

Quantum Cascade Laser Based Hybrid Dual Comb Spectrometer

Authors: Luigi Consolino, Malik Nafa, Michele De Regis, Francesco Cappelli, Katia Garrasi, Francesco P. Mezzapesa, Lianhe Li, A. Giles Davies, Edmund H. Linfield, Miriam S. Vitiello, Saverio Bartalini, Paolo De Natale

Abstract: Four-wave-mixing-based quantum cascade laser frequency combs (QCL-FC) are a powerful photonic tool, driving a recent revolution in major molecular fingerprint regions, i.e. mid- and far-infrared domains. Their compact and frequency-agile design, together with their high optical power and spectral purity, promise to deliver an all-in-one source for the most challenging spectroscopic applications. H… ▽ More Four-wave-mixing-based quantum cascade laser frequency combs (QCL-FC) are a powerful photonic tool, driving a recent revolution in major molecular fingerprint regions, i.e. mid- and far-infrared domains. Their compact and frequency-agile design, together with their high optical power and spectral purity, promise to deliver an all-in-one source for the most challenging spectroscopic applications. Here, we demonstrate a metrological-grade hybrid dual comb spectrometer, combining the advantages of a THz QCL-FC with the accuracy and absolute frequency referencing provided by a free-standing, optically-rectified THz frequency comb. A proof-of-principle application to methanol molecular transitions is presented. The multi-heterodyne molecular spectra retrieved provide state-of-the-art results in line-center determination, achieving the same precision as currently available molecular databases. The devised setup provides a solid platform for a new generation of THz spectrometers, paving the way to more refined and sophisticated systems exploiting full phase control of QCL-FCs, or Doppler-free spectroscopic schemes. △ Less

Submitted 8 April, 2020; originally announced April 2020.

Journal ref: Communications Physics 2020

Long-wavelength infrared photovoltaic heterodyne receivers using patch-antenna quantum cascade detectors

Authors: Azzurra Bigioli, Giovanni Armaroli, Angela Vasanelli, Djamal Gacemi, Yanko Todorov, Daniele Palaferri, Lianhe Li, Alexander Giles Davies, Edmund Linfield, Carlo Sirtori

Abstract: Quantum cascade detectors (QCD) are unipolar infrared devices where the transport of the photo excited carriers takes place through confined electronic states, without an applied bias. In this photovoltaic mode, the detector's noise is not dominated by a dark shot noise process, therefore, performances are less degraded at high temperature with respect to photoconductive detectors. This work descr… ▽ More Quantum cascade detectors (QCD) are unipolar infrared devices where the transport of the photo excited carriers takes place through confined electronic states, without an applied bias. In this photovoltaic mode, the detector's noise is not dominated by a dark shot noise process, therefore, performances are less degraded at high temperature with respect to photoconductive detectors. This work describes a 9 um QCD embedded into a patch-antenna metamaterial which operates with state-of-the-art performances. The metamaterial gathers photons on a collection area, Acoll, much bigger than the geometrical area of the detector, improving the signal to noise ratio up to room temperature. The background-limited detectivity at 83 K is 5.5 x 10^10 cm Hz^1/2 W^-1, while at room temperature, the responsivity is 50 mA/W at 0 V bias. Patch antenna QCD is an ideal receiver for a heterodyne detection set-up, where a signal at a frequency 1.4 GHz and T=295 K is reported as first demonstration of uncooled 9um photovoltaic receivers with GHz electrical bandwidth. These findings guide the research towards uncooled IR quantum limited detection. △ Less

Submitted 24 March, 2020; originally announced March 2020.

Quasi-static and propagating modes in three-dimensional THz circuits

Authors: Mathieu Jeannin, Djamal Gacemi, Angela Vasanelli, Lianhe Li, Alexander Giles Davies, Edmund Linfield, Giorgio Biasiol, Carlo Sirtori, Yanko Todorov

Abstract: We provide an analysis of the electromagnetic modes of three-dimensional metamaterial resonators in the THz frequency range. The fundamental resonance of the structures is fully described by an analytical circuit model, which not only reproduces the resonant frequencies but also the coupling of the metamaterial with an incident THz radiation. We also evidence the contribution of the propagation ef… ▽ More We provide an analysis of the electromagnetic modes of three-dimensional metamaterial resonators in the THz frequency range. The fundamental resonance of the structures is fully described by an analytical circuit model, which not only reproduces the resonant frequencies but also the coupling of the metamaterial with an incident THz radiation. We also evidence the contribution of the propagation effects, and show how they can be reduced by design. In the optimized design the electric field energy is lumped into ultra-subwavelength ($λ$/100) capacitors, where we insert semiconductor absorber based on the collective electronic excitation in a two dimensional electron gas. The optimized electric field confinement is evidenced by the observation of the ultra-strong light-matter coupling regime, and opens many possible applications for these structures for detectors, modulators and sources of THz radiation. △ Less

Submitted 15 May, 2020; v1 submitted 22 February, 2020; originally announced February 2020.

Mixing properties of room temperature patch-antenna receivers in a mid-infrared (9um) heterodyne system

Authors: A. Bigioli, D. Gacemi, D. Palaferri, Y. Todorov, A. Vasanelli, S. Suffit, L. Li, A. G. Davies, E. H. Linfield, F. Kapsalidis, M. Beck, J. Faist, C. Sirtori

Abstract: A room-temperature mid-infrared (9 um) heterodyne system based on high-performance unipolar optoelectronic devices is presented. The local oscillator (LO) is a quantum cascade laser, while the receiver is an antenna coupled quantum well infrared photodetector optimized to operate in a microcavity configuration. Measurements of the saturation intensity show that these receivers have a linear respon… ▽ More A room-temperature mid-infrared (9 um) heterodyne system based on high-performance unipolar optoelectronic devices is presented. The local oscillator (LO) is a quantum cascade laser, while the receiver is an antenna coupled quantum well infrared photodetector optimized to operate in a microcavity configuration. Measurements of the saturation intensity show that these receivers have a linear response up to very high optical power, an essential feature for heterodyne detection. By an accurate passive stabilization of the local oscillator and minimizing the optical feed-back the system reaches, at room temperature, a record value of noise equivalent power of 30 pW at 9um. Finally, it is demonstrated that the injection of microwave signal into our receivers shifts the heterodyne beating over the bandwidth of the devices. This mixing property is a unique valuable function of these devices for signal treatment. △ Less

Submitted 11 July, 2019; originally announced July 2019.

Optomechanical response with nanometer resolution in the self-mixing signal of a terahertz quantum cascade laser

Authors: Andrea Ottomaniello, James Keeley, Pierluigi Rubino, Lianhe Li, Marco Cecchini, Edmund H. Linfield, A. Giles Davies, Paul Dean, Alessandro Pitanti, Alessandro Tredicucci

Abstract: The effectiveness of self-mixing interferometry has been demonstrated across the electromagnetic spectrum, from visible to microwave frequencies, in a plethora of sensing applications, ranging from distance measurement to material analysis, microscopy and coherent imaging. Owing to their intrinsic stability to optical feedback, quantum cascade lasers (QCLs) represent a source that offers unique an… ▽ More The effectiveness of self-mixing interferometry has been demonstrated across the electromagnetic spectrum, from visible to microwave frequencies, in a plethora of sensing applications, ranging from distance measurement to material analysis, microscopy and coherent imaging. Owing to their intrinsic stability to optical feedback, quantum cascade lasers (QCLs) represent a source that offers unique and versatile characteristics to further improve the self-mixing functionality at mid infrared and terahertz (THz) frequencies. Here, we show the feasibility of detecting with nanometer precision deeply subwalength (< λ/6000) mechanical vibrations of a suspended Si3N4-membrane used as the external element of a THz QCL feedback interferometric apparatus. Besides representing a platform for the characterization of small displacements, our self-mixing configuration can be exploited for the realization of optomechanical systems, where several laser sources can be linked together through a common mechanical microresonator actuated by radiation pressure. △ Less

Submitted 20 June, 2019; originally announced June 2019.

Comments: 5 pages, 4 figures

Ultrafast two-dimensional field spectroscopy of terahertz intersubband saturable absorbers

Authors: Jürgen Raab, Christoph Lange, Jessica L. Boland, Ignaz Laepple, Martin Furthmeier, Enrico Dardanis, Nils Dessmann, Lianhe Li, Edmund H. Linfield, A. Giles Davies, Miriam S. Vitiello, Rupert Huber

Abstract: Intersubband (ISB) transitions in semiconductor multi-quantum well (MQW) structures are promising candidates for the development of saturable absorbers at terahertz (THz) frequencies. Here, we exploit amplitude and phase-resolved two-dimensional (2D) THz spectroscopy on the sub-cycle time scale to observe directly the saturation dynamics and coherent control of ISB transitions in a metal-insulator… ▽ More Intersubband (ISB) transitions in semiconductor multi-quantum well (MQW) structures are promising candidates for the development of saturable absorbers at terahertz (THz) frequencies. Here, we exploit amplitude and phase-resolved two-dimensional (2D) THz spectroscopy on the sub-cycle time scale to observe directly the saturation dynamics and coherent control of ISB transitions in a metal-insulator MQW structure. Clear signatures of incoherent pump-probe and coherent four-wave mixing signals are recorded as a function of the peak electric field of the single-cycle THz pulses. All nonlinear signals reach a pronounced maximum for a THz electric field amplitude of 11 kV/cm and decrease for higher fields. We demonstrate that this behavior is a fingerprint of THz-driven carrier-wave Rabi flopping. A numerical solution of the Maxwell-Bloch equations reproduces our experimental findings quantitatively and traces the trajectory of the Bloch vector. This microscopic model allows us to design tailored MQW structures with optimized dynamical properties for saturable absorbers that could be used in future compact semiconductor-based single-cycle THz sources. △ Less

Submitted 1 May, 2019; originally announced May 2019.

Journal ref: Optics Express Vol. 27, Issue 3, pp. 2248-2257 (2019)

Photon Acceleration in a Flying Focus

Authors: A. J. Howard, D. Turnbull, A. S. Davies, P. Franke, D. H. Froula, J. P. Palastro

Abstract: A high-intensity laser pulse propagating through a medium triggers an ionization front that can accelerate and frequency-upshift the photons of a second pulse. The maximum upshift is ultimately limited by the accelerated photons outpacing the ionization front or the ionizing pulse refracting from the plasma. Here we apply the flying focus--a moving focal point resulting from a chirped laser pulse… ▽ More A high-intensity laser pulse propagating through a medium triggers an ionization front that can accelerate and frequency-upshift the photons of a second pulse. The maximum upshift is ultimately limited by the accelerated photons outpacing the ionization front or the ionizing pulse refracting from the plasma. Here we apply the flying focus--a moving focal point resulting from a chirped laser pulse focused by a chromatic lens--to overcome these limitations. Theory and simulations demonstrate that the ionization front produced by a flying focus can frequency-upshift an ultrashort optical pulse to the extreme ultraviolet over a centimeter of propagation. An analytic model of the upshift predicts that this scheme could be scaled to a novel table-top source of spatially coherent x-rays. △ Less

Submitted 30 April, 2019; originally announced May 2019.

Comments: 7 pages, 4 figures, 1 table

Journal ref: Phys. Rev. Lett. 123, 124801 (2019)

Fully phase-stabilized quantum cascade laser frequency comb

Authors: Luigi Consolino, Malik Nafa, Francesco Cappelli, Katia Garrasi, Francesco P. Mezzapesa, Lianhe Li, A. Giles Davies, Edmund H. Linfield, Miriam S. Vitiello, Paolo De Natale, Saverio Bartalini

Abstract: Optical frequency comb synthesizers (FCs) [1] are laser sources covering a broad spectral range with a number of discrete, equally spaced and highly coherent frequency components, fully controlled through only two parameters: the frequency separation between adjacent modes and the carrier offset frequency. Providing a phase-coherent link between the optical and the microwave/radio-frequency region… ▽ More Optical frequency comb synthesizers (FCs) [1] are laser sources covering a broad spectral range with a number of discrete, equally spaced and highly coherent frequency components, fully controlled through only two parameters: the frequency separation between adjacent modes and the carrier offset frequency. Providing a phase-coherent link between the optical and the microwave/radio-frequency regions [2], FCs have become groundbreaking tools for precision measurements[3,4]. Despite these inherent advantages, developing miniaturized comb sources across the whole infrared (IR), with an independent and simultaneous control of the two comb degrees of freedom at a metrological level, has not been possible, so far. Recently, promising results have been obtained with compact sources, namely diode-laser-pumped microresonators [5,6] and quantum cascade lasers (QCL-combs) [7,8]. While both these sources rely on four-wave mixing (FWM) to generate comb frequency patterns, QCL-combs benefit from a mm-scale miniaturized footprint, combined with an ad-hoc tailoring of the spectral emission in the 3-250 μm range, by quantum engineering [9]. Here, we demonstrate full stabilization and control of the two key parameters of a QCL-comb against the primary frequency standard. Our technique, here applied to a far-IR emitter and open ended to other spectral windows, enables Hz-level narrowing of the individual comb modes, and metrological-grade tuning of their individual frequencies, which are simultaneously measured with an accuracy of 2x10^-12, limited by the frequency reference used. These fully-controlled, frequency-scalable, ultra-compact comb emitters promise to pervade an increasing number of mid- and far-IR applications, including quantum technologies, due to the quantum nature of the gain media [10]. △ Less

Submitted 5 February, 2019; originally announced February 2019.

Comments: 12 pages, 6 figures

High dynamic range, heterogeneous, terahertz quantum cascade lasers featuring thermally-tunable frequency comb operation over a broad current range

Authors: Katia Garrasi, Francesco P. Mezzapesa, Luca Salemi, Lianhe Li, Luigi Consolino, Saverio Bartalini, Paolo De Natale, A. Giles Davies, Edmund H. Linfield, Miriam S. Vitiello

Abstract: We report on the engineering of broadband quantum cascade lasers (QCLs) emitting at Terahertz (THz) frequencies, which exploit a heterogeneous active region scheme and have a current density dynamic range (Jdr) of 3.2, significantly larger than the state of the art, over a 1.3 THz bandwidth. We demonstrate that the devised broadband lasers operate as THz optical frequency comb synthesizers in cont… ▽ More We report on the engineering of broadband quantum cascade lasers (QCLs) emitting at Terahertz (THz) frequencies, which exploit a heterogeneous active region scheme and have a current density dynamic range (Jdr) of 3.2, significantly larger than the state of the art, over a 1.3 THz bandwidth. We demonstrate that the devised broadband lasers operate as THz optical frequency comb synthesizers in continuous wave, with a maximum optical output power of 4 mW (0.73 mW in the comb regime). Measurement of the intermode beatnote map reveals a clear dispersion-compensated frequency comb regime extending over a continuous 106 mA current range (current density dynamic range of 1.24), significantly larger than the state of the art reported under similar geometries, with a corresponding emission bandwidth of 1.05 THz ans a stable and narrow (4.15 KHz) beatnote detected with a signal-to-noise ratio of 34 dB. Analysis of the electrical and thermal beatnote tuning reveals a current-tuning coefficient ranging between 5 MHz/mA and 2.1 MHz/mA and a temperature-tuning coefficient of -4 MHz/K. The ability to tune the THz QCL combs over their full dynamic range by temperature and current paves the way for their use as powerful spectroscopy tool that can provide broad frequency coverage combined with high precision spectral accuracy. △ Less

Submitted 25 January, 2019; originally announced January 2019.

Journal ref: ACS Photonics, 2019, 6 (1), 73-78

Giant optical nonlinearity cancellation in quantum wells

Authors: S. Houver, A. Lebreton, T. A. S. Pereira, G. Xu, R. Colombelli, I. Kundu, L. H. Li, E. H. Linfield, A. G. Davies, J. Mangeney, J. Tignon, R. Ferreira, S. S. Dhillon

Abstract: Second-order optical nonlinearities can be greatly enhanced by orders of magnitude in resonantly excited nanostructures, theoretically predicted and experimentally investigated in a variety of semiconductor systems. These resonant nonlinearities continually attract attention, particularly in newly discovered materials, but tend not to be as efficient as currently predicted. This limits their explo… ▽ More Second-order optical nonlinearities can be greatly enhanced by orders of magnitude in resonantly excited nanostructures, theoretically predicted and experimentally investigated in a variety of semiconductor systems. These resonant nonlinearities continually attract attention, particularly in newly discovered materials, but tend not to be as efficient as currently predicted. This limits their exploitation in frequency conversion. Here, we present a clear-cut theoretical and experimental demonstration that the second-order nonlinear susceptibility can vary by orders of magnitude as a result of giant cancellation effects in systems with many confined quantum states. Using terahertz quantum cascade lasers as a model source to investigate interband and intersubband resonant nonlinearities, we show that these giant cancellations are a result of interfering second-order nonlinear contributions of light and heavy hole states. As well as of importance to understand and engineer the resonant optical properties of materials, this work can be employed as a new, extremely sensitive tool to elucidate the bandstructure properties of complex quantum well systems. △ Less

Submitted 4 January, 2019; originally announced January 2019.

Highly Volcanic Exoplanets, Lava Worlds, and Magma Ocean Worlds: An Emerging Class of Dynamic Exoplanets of Significant Scientific Priority

Authors: Wade G. Henning, Joseph P. Renaud, Prabal Saxena, Patrick L. Whelley, Avi M. Mandell, Soko Matsumura, Lori S. Glaze, Terry A. Hurford, Timothy A. Livengood, Christopher W. Hamilton, Michael Efroimsky, Valeri V. Makarov, Ciprian T. Berghea, Scott D. Guzewich, Kostas Tsigaridis, Giada N. Arney, Daniel R. Cremons, Stephen R. Kane, Jacob E. Bleacher, Ravi K. Kopparapu, Erika Kohler, Yuni Lee, Andrew Rushby, Weijia Kuang, Rory Barnes , et al. (17 additional authors not shown)

Abstract: Highly volcanic exoplanets, which can be variously characterized as 'lava worlds', 'magma ocean worlds', or 'super-Ios' are high priority targets for investigation. The term 'lava world' may refer to any planet with extensive surface lava lakes, while the term 'magma ocean world' refers to planets with global or hemispherical magma oceans at their surface. 'Highly volcanic planets', including supe… ▽ More Highly volcanic exoplanets, which can be variously characterized as 'lava worlds', 'magma ocean worlds', or 'super-Ios' are high priority targets for investigation. The term 'lava world' may refer to any planet with extensive surface lava lakes, while the term 'magma ocean world' refers to planets with global or hemispherical magma oceans at their surface. 'Highly volcanic planets', including super-Ios, may simply have large, or large numbers of, active explosive or extrusive volcanoes of any form. They are plausibly highly diverse, with magmatic processes across a wide range of compositions, temperatures, activity rates, volcanic eruption styles, and background gravitational force magnitudes. Worlds in all these classes are likely to be the most characterizable rocky exoplanets in the near future due to observational advantages that stem from their preferential occurrence in short orbital periods and their bright day-side flux in the infrared. Transit techniques should enable a level of characterization of these worlds analogous to hot Jupiters. Understanding processes on highly volcanic worlds is critical to interpret imminent observations. The physical states of these worlds are likely to inform not just geodynamic processes, but also planet formation, and phenomena crucial to habitability. Volcanic and magmatic activity uniquely allows chemical investigation of otherwise spectroscopically inaccessible interior compositions. These worlds will be vital to assess the degree to which planetary interior element abundances compare to their stellar hosts, and may also offer pathways to study both the very young Earth, and the very early form of many silicate planets where magma oceans and surface lava lakes are expected to be more prevalent. We suggest that highly volcanic worlds may become second only to habitable worlds in terms of both scientific and public long-term interest. △ Less

Submitted 13 April, 2018; originally announced April 2018.

Comments: A white paper submitted in response to the National Academy of Sciences 2018 Exoplanet Science Strategy solicitation, from the NASA Sellers Exoplanet Environments Collaboration (SEEC) of the Goddard Space Flight Center. 6 pages, 0 figures

Ultrafast terahertz detectors based on three-dimensional meta-atoms

Authors: B. Paulillo, S. Pirotta, H. Nong, P. Crozat, S. Guilet, G. Xu, S. Dhillon, L. H. Li, A. G. Davies, E. H. Linfield, R. Colombelli

Abstract: Terahertz (THz) and sub-THz frequency emitter and detector technologies are receiving increasing attention, underpinned by emerging applications in ultra-fast THz physics, frequency-combs technology and pulsed laser development in this relatively unexplored region of the electromagnetic spectrum. In particular, semiconductor-based ultrafast THz receivers are required for compact, ultrafast spectro… ▽ More Terahertz (THz) and sub-THz frequency emitter and detector technologies are receiving increasing attention, underpinned by emerging applications in ultra-fast THz physics, frequency-combs technology and pulsed laser development in this relatively unexplored region of the electromagnetic spectrum. In particular, semiconductor-based ultrafast THz receivers are required for compact, ultrafast spectroscopy and communication systems, and to date, quantum well infrared photodetectors (QWIPs) have proved to be an excellent technology to address this given their intrinsic ps-range response However, with research focused on diffraction-limited QWIP structures (lambda/2), RC constants cannot be reduced indefinitely, and detection speeds are bound to eventually meet un upper limit. The key to an ultra-fast response with no intrinsic upper limit even at tens of GHz is an aggressive reduction in device size, below the diffraction limit. Here we demonstrate sub-wavelength (lambda/10) THz QWIP detectors based on a 3D split-ring geometry, yielding ultra-fast operation at a wavelength of around 100 μm. Each sensing meta-atom pixel features a suspended loop antenna that feeds THz radiation in the ~20 m3 active volume. Arrays of detectors as well as single-pixel detectors have been implemented with this new architecture, with the latter exhibiting ultra-low dark currents below the nA level. This extremely small resonator architecture leads to measured optical response speeds - on arrays of 300 devices - of up to ~3 GHz and an expected device operation of up to tens of GHz, based on the measured S-parameters on single devices and arrays. △ Less

Submitted 19 January, 2018; originally announced January 2018.

Journal ref: Optica 4, 1451-1456 (2017)

Room temperature 9 $μ$m photodetectors and GHz heterodyne receivers

Authors: Daniele Palaferri, Yanko Todorov, Azzurra Bigioli, Alireza Mottaghizadeh, Djamal Gacemi, Allegra Calabrese, Angela Vasanelli, Lianhe Li, A. Giles Davies, Edmund H. Linfield, Filippos Kapsalidis, Mattias Beck, Jérôme Faist, Carlo Sirtori

Abstract: Room temperature operation is mandatory for any optoelectronics technology which aims to provide low-cost compact systems for widespread applications. In recent years, an important technological effort in this direction has been made in bolometric detection for thermal imaging$^1$, which has delivered relatively high sensitivity and video rate performance ($\sim$ 60 Hz). However, room temperature… ▽ More Room temperature operation is mandatory for any optoelectronics technology which aims to provide low-cost compact systems for widespread applications. In recent years, an important technological effort in this direction has been made in bolometric detection for thermal imaging$^1$, which has delivered relatively high sensitivity and video rate performance ($\sim$ 60 Hz). However, room temperature operation is still beyond reach for semiconductor photodetectors in the 8-12 $μ$m wavelength band$^2$, and all developments for applications such as imaging, environmental remote sensing and laser-based free-space communication$^{3-5}$ have therefore had to be realised at low temperatures. For these devices, high sensitivity and high speed have never been compatible with high temperature operation$^{6, 7}$. Here, we show that a 9 $μ$m quantum well infrared photodetector$^8$, implemented in a metamaterial made of subwavelength metallic resonators$^{9-12}$, has strongly enhanced performances up to room temperature. This occurs because the photonic collection area is increased with respect to the electrical area for each resonator, thus significantly reducing the dark current of the device$^{13}$. Furthermore, we show that our photonic architecture overcomes intrinsic limitations of the material, such as the drop of the electronic drift velocity with temperature$^{14, 15}$, which constrains conventional geometries at cryogenic operation$^6$. Finally, the reduced physical area of the device and its increased responsivity allows us, for the first time, to take advantage of the intrinsic high frequency response of the quantum detector$^7$ at room temperature. By beating two quantum cascade lasers$^{16}$ we have measured the heterodyne signal at high frequencies up to 4 GHz. △ Less

Submitted 6 September, 2017; originally announced September 2017.

Modeling observations of solar coronal mass ejections with heliospheric imagers verified with the Heliophysics System Observatory

Authors: C. Möstl, A. Isavnin, P. D. Boakes, E. K. J. Kilpua, J. A. Davies, R. A. Harrison, D. Barnes, V. Krupar, J. P. Eastwood, S. W. Good, R. J. Forsyth, V. Bothmer, M. A. Reiss, T. Amerstorfer, R. M. Winslow, B. J. Anderson, L. C. Philpott, L. Rodriguez, A. P. Rouillard, P. T. Gallagher, T. L. Zhang

Abstract: We present an advance towards accurately predicting the arrivals of coronal mass ejections (CMEs) at the terrestrial planets, including Earth. For the first time, we are able to assess a CME prediction model using data over 2/3 of a solar cycle of observations with the Heliophysics System Observatory. We validate modeling results of 1337 CMEs observed with the Solar Terrestrial Relations Observato… ▽ More We present an advance towards accurately predicting the arrivals of coronal mass ejections (CMEs) at the terrestrial planets, including Earth. For the first time, we are able to assess a CME prediction model using data over 2/3 of a solar cycle of observations with the Heliophysics System Observatory. We validate modeling results of 1337 CMEs observed with the Solar Terrestrial Relations Observatory (STEREO) heliospheric imagers (HI) (science data) from 8 years of observations by 5 in situ observing spacecraft. We use the self-similar expansion model for CME fronts assuming 60 degree longitudinal width, constant speed and constant propagation direction. With these assumptions we find that 23%-35% of all CMEs that were predicted to hit a certain spacecraft lead to clear in situ signatures, so that for 1 correct prediction, 2 to 3 false alarms would have been issued. In addition, we find that the prediction accuracy does not degrade with the HI longitudinal separation from Earth. Predicted arrival times are on average within 2.6 +/- 16.6 hours difference of the in situ arrival time, similar to analytical and numerical modeling, and a true skill statistic of 0.21. We also discuss various factors that may improve the accuracy of space weather forecasting using wide-angle heliospheric imager observations. These results form a first order approximated baseline of the prediction accuracy that is possible with HI and other methods used for data by an operational space weather mission at the Sun-Earth L5 point. △ Less

Submitted 7 July, 2017; v1 submitted 2 March, 2017; originally announced March 2017.

Comments: 27 pages, 7 figures, 3 tables, accepted for publication in the AGU journal "Space Weather" on 2017 July 1

A propagation tool to connect remote-sensing observations with in-situ measurements of heliospheric structures

Authors: A. P. Rouillard, B. Lavraud, V. Genot, M. Bouchemit, N. Dufourg, I. Plotnikov, R. F. Pinto, E. Sanchez-Diaz, M. Lavarra, M. Penou, C. Jacquey, N. Andre, S. Caussarieu, J. -P. Toniutti, D. Popescu, E. Buchlin, S. Caminade, P. Alingery, J. A. Davies, D. Odstrcil, L. Mays

Abstract: The remoteness of the Sun and the harsh conditions prevailing in the solar corona have so far limited the observational data used in the study of solar physics to remote-sensing observations taken either from the ground or from space. In contrast, the `solar wind laboratory' is directly measured in situ by a fleet of spacecraft measuring the properties of the plasma and magnetic fields at specific… ▽ More The remoteness of the Sun and the harsh conditions prevailing in the solar corona have so far limited the observational data used in the study of solar physics to remote-sensing observations taken either from the ground or from space. In contrast, the `solar wind laboratory' is directly measured in situ by a fleet of spacecraft measuring the properties of the plasma and magnetic fields at specific points in space. Since 2007, the solar-terrestrial relations observatory (STEREO) has been providing images of the solar wind that flows between the solar corona and spacecraft making in-situ measurements. This has allowed scientists to directly connect processes imaged near the Sun with the subsequent effects measured in the solar wind. This new capability prompted the development of a series of tools and techniques to track heliospheric structures through space. This article presents one of these tools, a web-based interface called the 'Propagation Tool' that offers an integrated research environment to study the evolution of coronal and solar wind structures, such as Coronal Mass Ejections (CMEs), Corotating Interaction Regions (CIRs) and Solar Energetic Particles (SEPs). These structures can be propagated from the Sun outwards to or alternatively inwards from planets and spacecraft situated in the inner and outer heliosphere. In this paper, we present the global architecture of the tool, discuss some of the assumptions made to simulate the evolution of the structures and show how the tool connects to different databases. △ Less

Submitted 1 February, 2017; originally announced February 2017.

Comments: 22 pages, 10 figures, submitted to Planetary and Space Science

Observational evidence for the associated formation of blobs and raining inflows in the solar Corona

Authors: Eduardo Sanchez-Diaz, Alexis P. Rouillard, Jackie A. Davies, Benoit Lavraud, Neil R. Sheeley, Rui F. Pinto, Emilia Kilpua, Illya Plotnikov, Vincent Genot

Abstract: The origin of the slow solar wind is still a topic of much debate. The continual emergence of small transient structures from helmet streamers is thought to constitute one of the main sources of the slow wind. Determining the height at which these transients are released is an important factor in determining the conditions under which the slow solar wind forms. To this end, we have carried out a m… ▽ More The origin of the slow solar wind is still a topic of much debate. The continual emergence of small transient structures from helmet streamers is thought to constitute one of the main sources of the slow wind. Determining the height at which these transients are released is an important factor in determining the conditions under which the slow solar wind forms. To this end, we have carried out a multipoint analysis of small transient structures released from a north-south tilted helmet streamer into the slow solar wind over a broad range of position angles during Carrington Rotation 2137. Combining the remote-sensing observations taken by the Solar-TErrestrial RElations Observatory (STEREO) mission with coronagraphic observations from the Solar and Heliospheric Observatory (SoHO) spacecraft, we show that the release of such small transient structures (often called blobs), which subsequently move away from the Sun, is associated with the concomitant formation of transient structures collapsing back towards the Sun; the latter have been referred to by previous authors as raining inflows. This is the first direct association between outflowing blobs and raining inflows, which locates the formation of blobs above the helmet streamers and gives strong support that the blobs are released by magnetic reconnection. △ Less

Submitted 16 December, 2016; originally announced December 2016.

Comments: Submitted to Astrophysical Journal Letters

Distributed feedback terahertz frequency quantum cascade lasers with dual periodicity gratings

Authors: F. Castellano, S. Zanotto, L. H. Li, A. Pitanti, A. Tredicucci, E. H. Linfield, A. G. Davies, M. S. Vitiello

Abstract: We have developed terahertz frequency quantum cascade lasers that exploit a double-periodicity distributed feedback grating to control the emission frequency and the output beam direction independently. The spatial refractive index modulation of the gratings necessary to provide optical feedback at a fixed frequency and, simultaneously, a far-field emission pattern centered at controlled angles, w… ▽ More We have developed terahertz frequency quantum cascade lasers that exploit a double-periodicity distributed feedback grating to control the emission frequency and the output beam direction independently. The spatial refractive index modulation of the gratings necessary to provide optical feedback at a fixed frequency and, simultaneously, a far-field emission pattern centered at controlled angles, was designed through use of an appropriate wavevector scattering model. Single mode THz emission at angles tuned by design between 0° and 50° was realized, leading to an original phase-matching approach, lithographically independent, for highly collimated THz QCLs. △ Less

Submitted 30 May, 2016; originally announced May 2016.

Smart-aggregation imaging for single molecule localization with SPAD cameras

Authors: Istvan Gyongy, Amy Davies, Neale A. W. Dutton, Rory Duncan, Colin Rickman, Robert K. Henderson, Paul Dalgarno

Abstract: SPAD cameras offer single photon detection sensitivity, high frame rates and zero readout noise. They are a core technology for widefield FLIM, but have further potential in ultra-fast imaging applications. However, in practice sensitivity falls behind that of EMCCD and sCMOS devices due to the lower photon detection efficiency of SPAD arrays. This paper considers the application of a binary SPAD… ▽ More SPAD cameras offer single photon detection sensitivity, high frame rates and zero readout noise. They are a core technology for widefield FLIM, but have further potential in ultra-fast imaging applications. However, in practice sensitivity falls behind that of EMCCD and sCMOS devices due to the lower photon detection efficiency of SPAD arrays. This paper considers the application of a binary SPAD camera to the capture of blinking molecules as part of a superresolution (dSTORM/PALM) experiment. Simulation and experimental studies demonstrate that the effective sensitivity of the camera can be improved significantly by aggregation of signal only binary frames. The simulations also indicate that with future advances in SPAD camera technology, SPAD devices could in time outperform existing scientific cameras when capturing fast temporal dynamics. △ Less

Submitted 12 February, 2016; originally announced February 2016.

Excitation, detection, and electrostatic manipulation of terahertz-frequency range plasmons in a two-dimensional electron system

Authors: Jingbo Wu, Alexander S. Mayorov, Christopher D. Wood, Divyang Mistry, Lianhe Li, Wilson Muchenje, Mark C. Rosamond, Li Chen, Edmund H. Linfield, A. Giles Davies, John E. Cunningham

Abstract: Terahertz time domain spectroscopy employing free-space radiation has frequently been used to probe the elementary excitations of low-dimensional systems. The diffraction limit blocks its use for the in-plane study of individual laterally defined nanostructures, however. Here, we demonstrate a planar terahertz-frequency plasmonic circuit in which photoconductive material is monolithically integrat… ▽ More Terahertz time domain spectroscopy employing free-space radiation has frequently been used to probe the elementary excitations of low-dimensional systems. The diffraction limit blocks its use for the in-plane study of individual laterally defined nanostructures, however. Here, we demonstrate a planar terahertz-frequency plasmonic circuit in which photoconductive material is monolithically integrated with a two-dimensional electron system. Plasmons with a broad spectral range (up to ~400 GHz) are excited by injecting picosecond-duration pulses, generated and detected by a photoconductive semiconductor, into a high mobility two-dimensional electron system. Using voltage modulation of a Schottky gate overlying the two-dimensional electron system, we form a tuneable plasmonic cavity, and observe electrostatic manipulation of the plasmon resonances. Our technique offers a direct route to access the picosecond dynamics of confined transport in a broad range of lateral nanostructures. △ Less

Submitted 24 June, 2015; originally announced June 2015.

Comments: 24 pages, 10 figures

A comparison of reconstruction methods for the estimation of CME kinematics based on SECCHI/HI observations

Authors: Wageesh Mishra, Nandita Srivastava, Jackie A. Davies

Abstract: A study of the kinematics and arrival times of CMEs at Earth, derived from time-elongation maps (J-maps) constructed from STEREO/Heliospheric Imager (HI) observations, provides an opportunity to understand the heliospheric evolution of CMEs in general. We implement various reconstruction techniques, based on the use of time-elongation profiles of propagating CMEs viewed from single or multiple van… ▽ More A study of the kinematics and arrival times of CMEs at Earth, derived from time-elongation maps (J-maps) constructed from STEREO/Heliospheric Imager (HI) observations, provides an opportunity to understand the heliospheric evolution of CMEs in general. We implement various reconstruction techniques, based on the use of time-elongation profiles of propagating CMEs viewed from single or multiple vantage points, to estimate the dynamics of three geo-effective CMEs. We use the kinematic properties, derived from analysis of the elongation profiles, as inputs to the Drag Based Model for the distance beyond which the CMEs cannot be tracked unambiguously in the J-maps. The ambient solar wind into which these CMEs, which travel with different speeds, are launched, is different. Therefore, these CMEs will evolve differently throughout their journey from the Sun to 1 AU. We associate the CMEs, identified and tracked in the J-maps, with signatures observed in situ near 1 AU by the WIND spacecraft. By deriving the kinematic properties of each CME, using a variety of existing methods, we assess the relative performance of each method for the purpose of space weather forecasting. We discuss the limitations of each method, and identify the major constraints in predicting the arrival time of CMEs near 1 AU using heliospheric imager observations. △ Less

Submitted 31 July, 2014; originally announced July 2014.

Comments: 40pages, 10 figures, Published in ApJ

Journal ref: 2014, ApJ, 784, 135

Combined Multipoint Remote and In Situ Observations of the Asymmetric Evolution of a Fast Solar Coronal Mass Ejection

Authors: T. Rollett, C. Moestl, M. Temmer, R. A. Frahm, J. A. Davies, A. M. Veronig, B. Vrsnak, U. V. Amerstorfer, C. J. Farrugia, T. Zic, T. L. Zhang

Abstract: We present an analysis of the fast coronal mass ejection (CME) of 2012 March 7, which was imaged by both STEREO spacecraft and observed in situ by MESSENGER, Venus Express, Wind and Mars Express. Based on detected arrivals at four different positions in interplanetary space, it was possible to strongly constrain the kinematics and the shape of the ejection. Using the white-light heliospheric image… ▽ More We present an analysis of the fast coronal mass ejection (CME) of 2012 March 7, which was imaged by both STEREO spacecraft and observed in situ by MESSENGER, Venus Express, Wind and Mars Express. Based on detected arrivals at four different positions in interplanetary space, it was possible to strongly constrain the kinematics and the shape of the ejection. Using the white-light heliospheric imagery from STEREO-A and B, we derived two different kinematical profiles for the CME by applying the novel constrained self-similar expansion method. In addition, we used a drag-based model to investigate the influence of the ambient solar wind on the CME's propagation. We found that two preceding CMEs heading in different directions disturbed the overall shape of the CME and influenced its propagation behavior. While the Venus-directed segment underwent a gradual deceleration (from ~2700 km/s at 15 R_sun to ~1500 km/s at 154 R_sun), the Earth-directed part showed an abrupt retardation below 35 R_sun (from ~1700 to ~900 km/s). After that, it was propagating with a quasi-constant speed in the wake of a preceding event. Our results highlight the importance of studies concerning the unequal evolution of CMEs. Forecasting can only be improved if conditions in the solar wind are properly taken into account and if attention is also paid to large events preceding the one being studied. △ Less

Submitted 17 July, 2014; originally announced July 2014.

Journal ref: The Astrophysical Journal Letters, 790:L6 (7pp), 2014

Using Coordinated Observations in Polarised White Light and Faraday Rotation to Probe the Spatial Position and Magnetic Field of an Interplanetary Sheath

Authors: Ming Xiong, Jackie A. Davies, Xueshang Feng, Mathew J. Owens, Richard A. Harrison, Chris J. Davis, Ying D. Liu

Abstract: Coronal mass ejections (CMEs) can be continuously tracked through a large portion of the inner heliosphere by direct imaging in visible and radio wavebands. White-light (WL) signatures of solar wind transients, such as CMEs, result from Thomson scattering of sunlight by free electrons, and therefore depend on both the viewing geometry and the electron density. The Faraday rotation (FR) of radio wa… ▽ More Coronal mass ejections (CMEs) can be continuously tracked through a large portion of the inner heliosphere by direct imaging in visible and radio wavebands. White-light (WL) signatures of solar wind transients, such as CMEs, result from Thomson scattering of sunlight by free electrons, and therefore depend on both the viewing geometry and the electron density. The Faraday rotation (FR) of radio waves from extragalactic pulsars and quasars, which arises due to the presence of such solar wind features, depends on the line-of-sight magnetic field component $B_\parallel$, and the electron density. To understand coordinated WL and FR observations of CMEs, we perform forward magnetohydrodynamic modelling of an Earth-directed shock and synthesise the signatures that would be remotely sensed at a number of widely distributed vantage points in the inner heliosphere. Removal of the background solar wind contribution reveals the shock-associated enhancements in WL and FR. While the efficiency of Thomson scattering depends on scattering angle, WL radiance $I$ decreases with heliocentric distance $r$ roughly according to the expression $I \propto r^{-3}$. The sheath region downstream of the Earth-directed shock is well viewed from the L4 and L5 Lagrangian points, demonstrating the benefits of these points in terms of space weather forecasting. The spatial position of the main scattering site $\mathbf{r}_{\rm sheath}$ and the mass of plasma at that position $M_{\rm sheath}$ can be inferred from the polarisation of the shock-associated enhancement in WL radiance. From the FR measurements, the local $B_{\parallel {\rm sheath}}$ at $\mathbf{r}_{\rm sheath}$ can then be estimated. Simultaneous observations in polarised WL and FR can not only be used to detect CMEs, but also to diagnose their plasma and magnetic field properties. △ Less

Submitted 15 August, 2013; originally announced August 2013.

Comments: 20 pages, 11 figures, 1 table. To be published by Astrophys. J., 2013

Journal ref: Astrophysical Journal, 777:32 (14pp), 2013

On Sun-to-Earth Propagation of Coronal Mass Ejections

Authors: Ying D. Liu, Janet G. Luhmann, Noé Lugaz, Christian Möstl, Jackie A. Davies, Stuart D. Bale, Robert P. Lin

Abstract: We investigate how coronal mass ejections (CMEs) propagate through, and interact with, the inner heliosphere between the Sun and Earth, a key question in CME research and space weather forecasting. CME Sun-to-Earth kinematics are constrained by combining wide-angle heliospheric imaging observations, interplanetary radio type II bursts and in situ measurements from multiple vantage points. We selec… ▽ More We investigate how coronal mass ejections (CMEs) propagate through, and interact with, the inner heliosphere between the Sun and Earth, a key question in CME research and space weather forecasting. CME Sun-to-Earth kinematics are constrained by combining wide-angle heliospheric imaging observations, interplanetary radio type II bursts and in situ measurements from multiple vantage points. We select three events for this study, the 2012 January 19, 23, and March 7 CMEs. Different from previous event studies, this work attempts to create a general picture for CME Sun-to-Earth propagation and compare different techniques for determining CME interplanetary kinematics. Key results are obtained concerning CME Sun-to-Earth propagation. Our comparison between different techniques (and data sets) also has important implications for CME observations and their interpretations. Future CME observations and space weather forecasting are discussed based on these results. See detail in the PDF. △ Less

Submitted 13 April, 2013; originally announced April 2013.

Comments: ApJ, in press

Terahertz quantum cascade lasers with thin resonant-phonon depopulation active regions and surface-plasmon waveguides

Authors: M. Salih, P. Dean, A. Valavanis, S. P. Khanna, L. H. Li, J. E. Cunningham, A. G. Davies, E. H. Linfield

Abstract: We report three-well, resonant-phonon depopulation terahertz quantum cascade lasers with semi-insulating surface-plasmon waveguides and reduced active region (AR) thicknesses. Devices with thicknesses of 10, 7.5, 6, and 5 μm are compared in terms of threshold current density, maximum operating temperature, output power and AR temperature. Thinner ARs are technologically less demanding for epitaxia… ▽ More We report three-well, resonant-phonon depopulation terahertz quantum cascade lasers with semi-insulating surface-plasmon waveguides and reduced active region (AR) thicknesses. Devices with thicknesses of 10, 7.5, 6, and 5 μm are compared in terms of threshold current density, maximum operating temperature, output power and AR temperature. Thinner ARs are technologically less demanding for epitaxial growth and result in reduced electrical heating of devices. However, it is found that 7.5-μm-thick devices give the lowest electrical power densities at threshold, as they represent the optimal trade-off between low electrical resistance and low threshold gain. △ Less

Submitted 13 March, 2013; originally announced March 2013.

Comments: 16 pages, 6 figures

Journal ref: J. Appl. Phys. 113, 113110 (2013)

The Deflection of the Two Interacting Coronal Mass Ejections of 2010 May 23-24 as Revealed by Combined In situ Measurements and Heliospheric Imaging

Authors: N. Lugaz, C. J. Farrugia, J. A. Davies, C. Möstl, C. J. Davis, I. I. Roussev, M. Temmer

Abstract: In 2010 May 23-24, SDO observed the launch of two successive coronal mass ejections (CMEs), which were subsequently tracked by the SECCHI suite onboard STEREO. Using the COR2 coronagraphs and the heliospheric imagers (HIs), the initial direction of both CMEs is determined to be slightly west of the Sun-Earth line. We derive the CME kinematics, including the evolution of the CME expansion until 0.4… ▽ More In 2010 May 23-24, SDO observed the launch of two successive coronal mass ejections (CMEs), which were subsequently tracked by the SECCHI suite onboard STEREO. Using the COR2 coronagraphs and the heliospheric imagers (HIs), the initial direction of both CMEs is determined to be slightly west of the Sun-Earth line. We derive the CME kinematics, including the evolution of the CME expansion until 0.4 AU. We find that, during the interaction, the second CME decelerates from a speed above 500 km/s to 380 km/s the speed of the leading edge of the first CME. STEREO observes a complex structure composed of two different bright tracks in HI2-A but only one bright track in HI2-B. In situ measurements from Wind show an "isolated" ICME, with the geometry of a flux rope preceded by a shock. Measurements in the sheath are consistent with draping around the transient. By combining remote-sensing and in situ measurements, we determine that this event shows a clear instance of deflection of two CMEs after their collision, and we estimate the deflection of the first CME to be about 10 degrees towards the Sun-Earth line. The arrival time, arrival speed and radius at Earth of the first CME are best predicted from remote-sensing observations taken before the collision of the CMEs. Due to the over-expansion of the CME after the collision, there are few, if any, signs of interaction in in situ measurements. This study illustrates that complex interactions during the Sun-to-Earth propagation may not be revealed by in situ measurements alone. △ Less

Submitted 11 September, 2012; originally announced September 2012.

Comments: 14 pages, 8 figures, 1 table, accepted to the Astrophysical Journal