-
Thermo-mechanical Characterization of Joule Heated Twisted-Coiled Actuators
Authors:
Devang Tavkari,
Paul Davidson
Abstract:
In this study, Twisted-Coiled Actuators (TCA) were manufactured by co-coiling a silver coated nylon conductive yarn with a nylon primary mono filament. In the co-coiled TCA, the conductive yarn is used for Joule heating of primary nylon mono filament to provide controlled actuation. A detailed experimental study is conducted to characterize the thermo-mechanical response of TCA, with varying suppl…
▽ More
In this study, Twisted-Coiled Actuators (TCA) were manufactured by co-coiling a silver coated nylon conductive yarn with a nylon primary mono filament. In the co-coiled TCA, the conductive yarn is used for Joule heating of primary nylon mono filament to provide controlled actuation. A detailed experimental study is conducted to characterize the thermo-mechanical response of TCA, with varying supply of current amplitude and current rates. The results indicates significant rate-dependent hysteritic actuation response to supply current. The details of manufacturing, experiments and results are reported.
△ Less
Submitted 11 August, 2023;
originally announced August 2023.
-
A note on Bödewadt-Hartmann layers
Authors:
Peter A. Davidson,
Alban Pothérat
Abstract:
This paper addresses the problem of axisymetric rotating flows bounded by a fixed horizontal plate and subject to a permanent, uniform, vertical magnetic field (the so-called Bödewadt-Hartmann problem). The aim is to find out which one of the Coriolis or the Lorentz force dominates the dynamics (and hence the boundary layer thickness) when their ratio, represented by the Elsasser number $A$, varie…
▽ More
This paper addresses the problem of axisymetric rotating flows bounded by a fixed horizontal plate and subject to a permanent, uniform, vertical magnetic field (the so-called Bödewadt-Hartmann problem). The aim is to find out which one of the Coriolis or the Lorentz force dominates the dynamics (and hence the boundary layer thickness) when their ratio, represented by the Elsasser number $A$, varies. After a short review of existing linear solutions of the semi infinite Ekman-Hartmann problem, weakly non-linear analytical solutions as well as fully non-linear numerical solutions are given.
The case of a rotating vortex in a finite depth fluid layer is then studied, first when the flow is steady under a forced rotation and second for spin-down from some initial state. The angular velocity in the first case and decay time in the second are obtained analytically as a function of $A$ using the weakly non linear results of the semi-infinite Bödewadt-Hartmann problem.
△ Less
Submitted 6 June, 2020;
originally announced June 2020.
-
Probing Permanent Dipoles in CdSe Nanoplatelets with Transient Electric Birefringence
Authors:
Ivan Dozov,
Claire Goldmann,
Patrick Davidson,
Benjamin Abécassis
Abstract:
Zinc-blende CdSe semiconducting nanoplatelets (NPL) show outstanding quantum confinement properties thanks to their small, atomically-controlled, thickness. For example, they display extremely sharp absorption peaks that make them very interesting objects for optoelectronic applications. However, the presence of a ground-state electric dipole for these nanoparticles has not yet been investigated.…
▽ More
Zinc-blende CdSe semiconducting nanoplatelets (NPL) show outstanding quantum confinement properties thanks to their small, atomically-controlled, thickness. For example, they display extremely sharp absorption peaks that make them very interesting objects for optoelectronic applications. However, the presence of a ground-state electric dipole for these nanoparticles has not yet been investigated. We therefore used transient electric birefringence (TEB) to probe the electric dipole of 5-monolayer thick zinc-blende CdSe NPL with a parallelepipedic shape. We studied a dilute dispersion of isolated NPL coated with branched ligands and we measured, as a function of time, the birefringence induced by DC and AC field pulses. The electro-optic behavior proves the presence of a large dipolar moment (> 245 D) oriented along the length of the platelets. We then induced the slow face-to-face stacking of the NPL by adding oleic acid. In these stacks, the in-plane dipole components of consecutive NPL cancel whereas their normal components add. Moreover, interestingly, the excess polarizability tensor of the NPL stacks gives rise to an electro-optic contribution opposite to that of the electric dipole. By monitoring the TEB signal of the slowly-growing stacks over up to a year, we extracted the evolution of their average length with time and we showed that their electro-optic response can be explained by the presence of a 80 D dipolar component parallel to their normal. In spite of the $\bar{4}$3m space group of bulk ZB CdSe, these NPL thus bear an important ground-state dipole whose magnitude per unit volume is twice that found for wurtzite CdSe nanorods. We discuss the possible origin of this electric dipole, its consequences for the optical properties of these nanoparticles, and how it could explain their strong stacking propensity that severely hampers their colloidal stability.
△ Less
Submitted 5 December, 2019;
originally announced December 2019.
-
Formation of eyes in large-scale cyclonic vortices
Authors:
Ludivine Oruba,
Peter Davidson,
Emmanuel Dormy
Abstract:
We present numerical simulations of steady, laminar, axisymmetric convection of a Boussinesq fluid in a shallow, rotating, cylindrical domain. The flow is driven by an imposed vertical heat flux and shaped by the background rotation of the domain. The geometry is inspired by that of tropical cyclones and the global flow pattern consists of a shallow, swirling vortex combined with a poloidal flow i…
▽ More
We present numerical simulations of steady, laminar, axisymmetric convection of a Boussinesq fluid in a shallow, rotating, cylindrical domain. The flow is driven by an imposed vertical heat flux and shaped by the background rotation of the domain. The geometry is inspired by that of tropical cyclones and the global flow pattern consists of a shallow, swirling vortex combined with a poloidal flow in the r-z plane which is predominantly inward near the bottom boundary and outward along the upper surface. Our numerical experiments confirm that, as suggested by Oruba et al 2017, an eye forms at the centre of the vortex which is reminiscent of that seen in a tropical cyclone and is characterised by a local reversal in the direction of the poloidal flow. We establish scaling laws for the flow and map out the conditions under which an eye will, or will not, form. We show that, to leading order, the velocity scales with V=(αg β)^{1/2}H, where g is gravity, αthe expansion coefficient, βthe background temperature gradient, and H is the depth of the domain. We also show that the two most important parameters controlling the flow are Re=VH/νand Ro=V/ΩH, where Ωis the background rotation rate and νthe viscosity. The Prandtl number and aspect ratio also play an important, if secondary, role. Finally, and most importantly, we establish the criteria required for eye formation. These consist of a lower bound on Re, upper and lower bounds on Ro, and an upper bound on Ekman number.
△ Less
Submitted 4 February, 2018;
originally announced February 2018.
-
Eye Formation in Rotating Convection
Authors:
L. Oruba,
P. A. Davidson,
E. Dormy
Abstract:
We consider rotating convection in a shallow, cylindrical domain. We examine the conditions under which the resulting vortex develops an eye at its core; that is, a region where the poloidal flow reverses and the angular momentum is low. For simplicity, we restrict ourselves to steady, axisymmetric flows in a Boussinesq fluid. Our numerical experiments show that, in such systems, an eye forms as a…
▽ More
We consider rotating convection in a shallow, cylindrical domain. We examine the conditions under which the resulting vortex develops an eye at its core; that is, a region where the poloidal flow reverses and the angular momentum is low. For simplicity, we restrict ourselves to steady, axisymmetric flows in a Boussinesq fluid. Our numerical experiments show that, in such systems, an eye forms as a passive response to the development of a so-called eyewall, a conical annulus of intense, negative azimuthal vorticity that can form near the axis and separates the eye from the primary vortex. We also observe that the vorticity in the eyewall comes from the lower boundary layer, and relies on the fact the poloidal flow strips negative vorticity out of the boundary layer and carries it up into the fluid above as it turns upward near the axis. This process is effective only if the Reynolds number is sufficiently high for the advection of vorticity to dominate over diffusion. Finally we observe that, in the vicinity of the eye and the eyewall, the buoyancy and Coriolis forces are negligible, and so although these forces are crucial to driving and shaping the primary vortex, they play no direct role in eye formation in a Boussinesq fluid.
△ Less
Submitted 15 August, 2016;
originally announced August 2016.
-
On the Mössbauer effect and the rigid recoil question
Authors:
Mark Davidson
Abstract:
Various theories for the Mössbauer rigid-recoil effect, which enables a crystal to absorb momentum but not appreciable energy, are compared. These suggest that the recoil may not be instantaneous, and that the recoil time could be used to distinguish between them. An experiment is proposed to measure this time. The idea is to use a small sphere whose outer surface is coated with an electrically ch…
▽ More
Various theories for the Mössbauer rigid-recoil effect, which enables a crystal to absorb momentum but not appreciable energy, are compared. These suggest that the recoil may not be instantaneous, and that the recoil time could be used to distinguish between them. An experiment is proposed to measure this time. The idea is to use a small sphere whose outer surface is coated with an electrically charged Mössbauer-active element, and then to measure the amount of energy lost due to Bremmsstrahlung during the recoil of this sphere when a Mössbauer event occurs. As the energy radiated is proportional to the square of the acceleration from Larmor's formula, the amount of energy so radiated varies inversely proportional to the recoil time, and proportional to the charge squared. Although this energy is quite small, it can in principle be measured with the extreme sensitivity available in Mössbauer experiments. It is found that the most information would be gained with more long-lived isomers such as Rhodium-103m as the Mössbauer agent, and that correction terms to Larmor's formula need to be considered due to the finite radius of a small particle, and some of these corrections are included in the paper. These corrections are taken from the extensive literature on radiating spherical shells which were developed to analyze the Abraham-Lorentz model for a classical charged particle. This problem is interesting because a perfectly rigid crystal seems to pose questions about relativity, and because the Mössbauer effect is a phenomenon where the solid-state environment dramatically influences the probability of a nuclear process. Moreover, if the experiment proposed can measure the recoil time, then such measurements might provide a new class of analytical methods for material science and chemistry.
△ Less
Submitted 17 June, 2016;
originally announced June 2016.
-
Complex Structure of Dynamic Stall on Wind Turbine Airfoils
Authors:
Michael Hind,
John Strike,
Pourya Nikoueeyan,
Andrew Magstadt,
Ashli Babbitt,
Phillip Davidson,
Jonathan Naughton
Abstract:
Fluid dynamics video demonstrating the evolution of dynamic stall on a wind turbine blade.
Fluid dynamics video demonstrating the evolution of dynamic stall on a wind turbine blade.
△ Less
Submitted 12 October, 2013;
originally announced October 2013.
-
Freely-Decaying, Homogeneous Turbulence Generated by Multi-scale Grids
Authors:
Per-Åge Krogstad,
Peter Davidson
Abstract:
We investigate wind tunnel turbulence generated by both conventional and multi-scale grids. Measurements were made in a tunnel which has a large test-section, so that possible side wall effects are very small and the length assures that the turbulence has time to settle down to a homogeneous shear-free state. The conventional and multi-scale grids were all designed to produce turbulence with the s…
▽ More
We investigate wind tunnel turbulence generated by both conventional and multi-scale grids. Measurements were made in a tunnel which has a large test-section, so that possible side wall effects are very small and the length assures that the turbulence has time to settle down to a homogeneous shear-free state. The conventional and multi-scale grids were all designed to produce turbulence with the same integral scale, so that a direct comparison could be made between the different flows. Our primary finding is that the behavior of the turbulence behind our multi-scale grids is virtually identical to that behind the equivalent conventional grid. In particular, all flows exhibit a power-law decay of energy, $u^2 \sim t^{-n}$, where $n$ is very close to the classical Saffman exponent of $n = 6/5$. Moreover, all spectra exhibit classical Kolmogorov scaling, with the spectra collapsing on the integral scales at small $k$, and on the Kolmogorov micro-scales at large $k$. Our results are at odds with some other experiments performed on similar multi-scale grids, where significantly higher energy decay exponents and turbulence levels have been reported.
△ Less
Submitted 7 April, 2011;
originally announced April 2011.
-
A modal model for diffraction gratings
Authors:
Mark P. Davidson
Abstract:
A description of an algorithm for a rather general modal grating calculation is presented. Arbitrary profiles, depth, and permittivity are allowed. Gratings built up from sub-gratings are allowed, as are coatings on the sidewalls of lines, and arbitrary complex structure. Conical angles and good conductors are supported.
A description of an algorithm for a rather general modal grating calculation is presented. Arbitrary profiles, depth, and permittivity are allowed. Gratings built up from sub-gratings are allowed, as are coatings on the sidewalls of lines, and arbitrary complex structure. Conical angles and good conductors are supported.
△ Less
Submitted 10 September, 2002;
originally announced September 2002.
-
Tachyons, Quanta, and Chaos
Authors:
Mark P Davidson
Abstract:
It is shown using numerical simulation that classical charged tachyons have several features normally thought to be unique to quantum mechanics. Spin-like self-orbiting helical motions are shown to exist at discrete values for the velocity of the tachyon in Feynman-Wheeler electrodynamics and in normal causal electrodynamics more complex closed orbits also appear to exist. Tunneling behavior of…
▽ More
It is shown using numerical simulation that classical charged tachyons have several features normally thought to be unique to quantum mechanics. Spin-like self-orbiting helical motions are shown to exist at discrete values for the velocity of the tachyon in Feynman-Wheeler electrodynamics and in normal causal electrodynamics more complex closed orbits also appear to exist. Tunneling behavior of the classical tachyon is observed at classical turning points depending on the angle of incidence. The equations of motion appear to be chaotic and effectively indeterministic when the tachyon crosses its own past light cone. It is argued that self-interacting tachyons moving in a tight helix would behave causally, and that they could be a basis for a hidden variable description of quantum mechanics. A procedure is proposed which could determine the fine structure constant.
△ Less
Submitted 27 June, 2001; v1 submitted 26 March, 2001;
originally announced March 2001.
