-
Case Study: Fetal Breathing Movements as a Proxy for Fetal Lung Maturity Estimation
Authors:
Márton Á. Goda,
Ron Beloosesky,
Chen Ben David,
Zeev Weiner,
Joachim A. Behar
Abstract:
Premature births can lead to complications, with fetal lung immaturity being a primary concern. Currently, fetal lung maturity (FLM) requires an invasive surfactant extraction procedure between the 32nd and 39th weeks of pregnancy. Unfortunately, there is no non-invasive method for FLM assessment. This work hypothesized that fetal breathing movement (FBM) and surfactant levels are inversely couple…
▽ More
Premature births can lead to complications, with fetal lung immaturity being a primary concern. Currently, fetal lung maturity (FLM) requires an invasive surfactant extraction procedure between the 32nd and 39th weeks of pregnancy. Unfortunately, there is no non-invasive method for FLM assessment. This work hypothesized that fetal breathing movement (FBM) and surfactant levels are inversely coupled and that FBM can serve as a proxy for FLM estimation. To investigate the correlation between FBM and FLM, antenatal corticosteroid (ACS) was administered to increase fetal pulmonary surfactant levels in a high-risk 35th-week pregnant woman showing intrauterine growth restriction. Synchronous sonographic and phonographic measurements were continuously recorded for 25 minutes before and after the ASC treatments. Before the ACS injection, 268 continuous movements FBM episodes were recorded. The number of continuous FBM episodes significantly decreased to 3, 43, and 79 within 24, 48, and 72 hours, respectively, of the first injection of ACS, suggesting an inversely coupled connection between FBM and surfactant level s. Therefore, FBM may serve as a proxy for FLM estimation. Quantitative confirmation of these findings would suggest that FBM measurements could be used as a non-invasive and widely accessible FLM-assessment tool for high-risk pregnancies and routine examinations.
△ Less
Submitted 18 July, 2023;
originally announced July 2023.
-
Novel microfluidic strategy for the production of sodium alginate fibers with regular inclusions at very high throughput
Authors:
Marangon Francesco,
Baumgartner David,
Planchette Carole
Abstract:
Scalable technologies for the production of bio-compatible complex microfibers with controllable size and composition at competitively high throughput are urgently needed in order to meet the growing demand for such microstructures in pharmaceutical or biomedical applications. Here, we introduce a new in-air microfluidic strategy with throughput of > 1400 ml/h (corresponding to > 17000 m fiber per…
▽ More
Scalable technologies for the production of bio-compatible complex microfibers with controllable size and composition at competitively high throughput are urgently needed in order to meet the growing demand for such microstructures in pharmaceutical or biomedical applications. Here, we introduce a new in-air microfluidic strategy with throughput of > 1400 ml/h (corresponding to > 17000 m fiber per h). The microfibers of uniform diameter have regular inclusions, which can potentially be used for encapsulating cells into a protecting and nutrient environment, or for finely tuning the release of various actives at individualized doses. With the help of a newly developed prototype, we test seven different liquid combinations and obtain seven types of fibers, whose "dry" diameter range between 73um and 141um. The principle of our approach is to solidify the complex liquid structures generated by the controlled collisions of a drop stream with a continuous liquid jet, in air, via ionic crosslinking. After the stream of water-based droplets, which constitute the inclusions, collides in-air with the alginate-based jet (jet 1), the generated "drops-in-jet" compound is brought in contact with a second jet (jet 2) containing divalent strontium or calcium cations to initiate the solidification. Finally, the fibers are collected via a horizontal spinning plate, let to dry, i.e. to fully equilibrate under controlled conditions, and characterized by their elongation at break and Young's modulus.
△ Less
Submitted 10 August, 2022;
originally announced August 2022.
-
High-resolution modal analysis
Authors:
Kerem Ege,
Xavier Boutillon,
Bertrand David
Abstract:
Usual modal analysis techniques are based on the Fourier transform. Due to the Delta T . Delta f limitation, they perform poorly when the modal overlap mu exceeds 30%. A technique based on a high-resolution analysis algorithm and an order-detection method is presented here, with the aim of filling the gap between the low- and the high-frequency domains (30%<mu<100%). A pseudo-impulse force is ap…
▽ More
Usual modal analysis techniques are based on the Fourier transform. Due to the Delta T . Delta f limitation, they perform poorly when the modal overlap mu exceeds 30%. A technique based on a high-resolution analysis algorithm and an order-detection method is presented here, with the aim of filling the gap between the low- and the high-frequency domains (30%<mu<100%). A pseudo-impulse force is applied at points of interests of a structure and the response is measured at a given point. For each pair of measurements, the impulse response of the structure is retrieved by deconvolving the pseudo-impulse force and filtering the response with the result. Following conditioning treatments, the reconstructed impulse response is analysed in different frequency-bands. In each frequency-band, the number of modes is evaluated, the frequencies and damping factors are estimated, and the complex amplitudes are finally extracted. As examples of application, the separation of the twin modes of a square plate and the partial modal analyses of aluminium plates up to a modal overlap of 70% are presented. Results measured with this new method and those calculated with an improved Rayleigh method match closely.
△ Less
Submitted 4 September, 2009;
originally announced September 2009.
-
Study of GEM-like detectors with resistive electrodes for RICH applications
Authors:
A. G. Agocs,
A. Di Mauro,
A. Ben David,
B. Clark,
P. Martinengo,
E. Nappi,
V. Peskov
Abstract:
We have developed prototypes of GEM-like detectors with resistive electrodes to be used as RICH photodetectors equipped with CsI photocathodes. The main advantages of these detectors are their intrinsic spark protection and possibility to operate at high gain (~10E5) in many gases including poorly quenched ones, allowing for the adoption of windowless configurations in which the radiator gas is…
▽ More
We have developed prototypes of GEM-like detectors with resistive electrodes to be used as RICH photodetectors equipped with CsI photocathodes. The main advantages of these detectors are their intrinsic spark protection and possibility to operate at high gain (~10E5) in many gases including poorly quenched ones, allowing for the adoption of windowless configurations in which the radiator gas is also used in the chamber. Results of systematic studies of the resistive GEMs combined with CsI photocathodes are presented: its quantum efficiency, rate characteristics, long-term stability, etc. On the basis of the obtained results, we believe that the new detector will be a promising candidate for upgrading the ALICE RICH detector
△ Less
Submitted 13 December, 2007;
originally announced December 2007.
