Showing 1–50 of 348 results for author: Das, S

Magic wavelength at 477 nm for the strontium clock transition

Authors: Xinyuan Ma, Swarup Das, David Wilkowski, Chang Chi Kwong

Abstract: We report the experimental measurement of a magic wavelength at 476.82362(8) nm for the 88Sr clock transition. The magic wavelength is determined through AC-Stark shift spectroscopy of atoms in an optical dipole trap. The value slightly deviates from the theoretical prediction by 0.061(54) nm. This magic wavelength, being shorter than the common one at 813 nm, will be important for applications su… ▽ More We report the experimental measurement of a magic wavelength at 476.82362(8) nm for the 88Sr clock transition. The magic wavelength is determined through AC-Stark shift spectroscopy of atoms in an optical dipole trap. The value slightly deviates from the theoretical prediction by 0.061(54) nm. This magic wavelength, being shorter than the common one at 813 nm, will be important for applications such as Bragg pulses for matter-wave interferometry involving both clock states. This work also paves the way for quantum simulation with a shorter lattice. △ Less

Submitted 6 July, 2025; originally announced July 2025.

Photonics in Flatland: Challenges and Opportunities for Nanophotonics with 2D Semiconductors

Authors: Ali Azimi, Julien Barrier, Angela Barreda, Thomas Bauer, Farzaneh Bouzari, Abel Brokkelkamp, Francesco Buatier de Mongeot, Timothy Parsons, Peter Christianen, Sonia Conesa-Boj, Alberto G. Curto, Suprova Das, Bernardo Dias, Itai Epstein, Zlata Fedorova, F. Javier García de Abajo, Ilya Goykhman, Lara Greten, Johanna Grönqvist, Ludovica Guarneri, Yujie Guo, Tom Hoekstra, Xuerong Hu, Benjamin Laudert, Jason Lynch , et al. (23 additional authors not shown)

Abstract: Two-dimensional (2D) semiconductors are emerging as a versatile platform for nanophotonics, offering unprecedented tunability in optical properties through exciton resonance engineering, van der Waals heterostructuring, and external field control. These materials enable active optical modulation, single-photon emission, quantum photonics, and valleytronic functionalities, paving the way for next-g… ▽ More Two-dimensional (2D) semiconductors are emerging as a versatile platform for nanophotonics, offering unprecedented tunability in optical properties through exciton resonance engineering, van der Waals heterostructuring, and external field control. These materials enable active optical modulation, single-photon emission, quantum photonics, and valleytronic functionalities, paving the way for next-generation optoelectronic and quantum photonic devices. However, key challenges remain in achieving large-area integration, maintaining excitonic coherence, and optimizing amplitude-phase modulation for efficient light manipulation. Advances in fabrication, strain engineering, and computational modelling will be crucial to overcoming these limitations. This perspective highlights recent progress in 2D semiconductor-based nanophotonics, emphasizing opportunities for scalable integration into photonics. △ Less

Submitted 30 June, 2025; originally announced July 2025.

Comments: 39 pages, 7 figures

Quantum-Centric Alchemical Free Energy Calculations

Authors: Milana Bazayeva, Zhen Li, Danil Kaliakin, Fangchun Liang, Akhil Shajan, Susanta Das, Kenneth M. Merz Jr

Abstract: In the present work, we present a hybrid quantum-classical workflow aimed at improving the accuracy of alchemical free energy (AFE) predictions by incorporating configuration interaction (CI) simulations using the book-ending correction method. This approach applies the Multistate Bennett Acceptance Ratio (MBAR) over a coupling parameter λ to smoothly transition the system from molecular mechanics… ▽ More In the present work, we present a hybrid quantum-classical workflow aimed at improving the accuracy of alchemical free energy (AFE) predictions by incorporating configuration interaction (CI) simulations using the book-ending correction method. This approach applies the Multistate Bennett Acceptance Ratio (MBAR) over a coupling parameter λ to smoothly transition the system from molecular mechanics (MM) (λ = 0) to a quantum mechanics (QM) (λ = 1) description. The resulting correction is then applied to the classically (MM) computed AFE to account for the more accurate QM treatment. The standard book-ending procedure uses AMBER to simulate the MM region, and QUICK, AMBER's default QM engine, to handle the QM region with either the Hartree-Fock (HF) method or density functional theory (DFT). In this work, we introduce a novel interface to QUICK, via sander, that enables CI simulations, and can operate in two ways: A) via PySCF backend to perform full configuration interaction (FCI) using conventional computing resources, B) quantum-centric sample-based quantum diagonalization (SQD) workflow via Qiskit which leverages both quantum hardware and post-processing on conventional computing resources for CI simulations. In this workflow QUICK performs most steps of the calculations, but at user-defined intervals, it redirects the computation to either FCI or SQD backend to get the CI result. We computed the book-end corrections for the hydration free energy (HFE) of three small organic molecules (ammonia, methane, and water) to benchmark the proposed approach and demonstrate how quantum-computers can be used in AFE calculations. We believe that this approach can be scaled to more complex systems like drug-receptor interactions in future studies. △ Less

Submitted 25 June, 2025; originally announced June 2025.

An Atomic Cluster Expansion Potential for Twisted Multilayer Graphene

Authors: Yangshuai Wang, Drake Clark, Sambit Das, Ziyan Zhu, Daniel Massatt, Vikram Gavini, Mitchell Luskin, Christoph Ortner

Abstract: Twisted multilayer graphene, characterized by its moire patterns arising from inter-layer rotational misalignment, serves as a rich platform for exploring quantum phenomena. While first-principles calculations are computationally prohibitive and empirical interatomic potentials often lack accuracy, machine-learning interatomic potentials (MLIPs) present a promising alternative, offering (near-)DFT… ▽ More Twisted multilayer graphene, characterized by its moire patterns arising from inter-layer rotational misalignment, serves as a rich platform for exploring quantum phenomena. While first-principles calculations are computationally prohibitive and empirical interatomic potentials often lack accuracy, machine-learning interatomic potentials (MLIPs) present a promising alternative, offering (near-)DFT accuracy at a significantly reduced computational cost. Despite their success in two-dimensional monolayer materials, MLIPs remain under-explored in twisted multilayer graphene systems. In this work, we develop an Atomic Cluster Expansion (ACE) potential for simulating twisted multilayer graphene and test it on a range of simulation tasks. We propose an approach to construct training and test datasets that incorporate all possible twist angles and local stacking, including incommensurate ones. To achieve this, we generate configurations with periodic boundary conditions suitable for DFT calculations, and then introduce an internal twist and shift within those supercell structures. We further refine the dataset through active learning filtering, guided by Bayesian uncertainty quantification. Our model is validated for accuracy and robustness through a wide range of numerical tests. △ Less

Submitted 17 June, 2025; originally announced June 2025.

Constructive interference at the edge of quantum ergodic dynamics

Authors: Dmitry A. Abanin, Rajeev Acharya, Laleh Aghababaie-Beni, Georg Aigeldinger, Ashok Ajoy, Ross Alcaraz, Igor Aleiner, Trond I. Andersen, Markus Ansmann, Frank Arute, Kunal Arya, Abraham Asfaw, Nikita Astrakhantsev, Juan Atalaya, Ryan Babbush, Dave Bacon, Brian Ballard, Joseph C. Bardin, Christian Bengs, Andreas Bengtsson, Alexander Bilmes, Sergio Boixo, Gina Bortoli, Alexandre Bourassa, Jenna Bovaird , et al. (240 additional authors not shown)

Abstract: Quantum observables in the form of few-point correlators are the key to characterizing the dynamics of quantum many-body systems. In dynamics with fast entanglement generation, quantum observables generally become insensitive to the details of the underlying dynamics at long times due to the effects of scrambling. In experimental systems, repeated time-reversal protocols have been successfully imp… ▽ More Quantum observables in the form of few-point correlators are the key to characterizing the dynamics of quantum many-body systems. In dynamics with fast entanglement generation, quantum observables generally become insensitive to the details of the underlying dynamics at long times due to the effects of scrambling. In experimental systems, repeated time-reversal protocols have been successfully implemented to restore sensitivities of quantum observables. Using a 103-qubit superconducting quantum processor, we characterize ergodic dynamics using the second-order out-of-time-order correlators, OTOC$^{(2)}$. In contrast to dynamics without time reversal, OTOC$^{(2)}$ are observed to remain sensitive to the underlying dynamics at long time scales. Furthermore, by inserting Pauli operators during quantum evolution and randomizing the phases of Pauli strings in the Heisenberg picture, we observe substantial changes in OTOC$^{(2)}$ values. This indicates that OTOC$^{(2)}$ is dominated by constructive interference between Pauli strings that form large loops in configuration space. The observed interference mechanism endows OTOC$^{(2)}$ with a high degree of classical simulation complexity, which culminates in a set of large-scale OTOC$^{(2)}$ measurements exceeding the simulation capacity of known classical algorithms. Further supported by an example of Hamiltonian learning through OTOC$^{(2)}$, our results indicate a viable path to practical quantum advantage. △ Less

Submitted 11 June, 2025; originally announced June 2025.

Comments: See following link: https://zenodo.org/records/15640503, which includes: Circuits used in Fig. 3d, Fig. 3e, Fig. 4a, Fig. 4b of the main text. In addition, OTOC (C^(2)) circuits and data with 95, 40 and 31 qubits are also provided. For system sizes <= 40 qubits, we include exact simulation results. For system sizes > 40, we include experimental data

Dual-Material Double-Gate Source-Pocket Tunnel Field Effect Transistor with Homogeneous Gate Dielectric: Computational Analysis of Structural and Material Parameters for Enhanced Performance

Authors: Ramisa Fariha, Saikat Das, Labiba Tanjil Nida, Abeer Khan, Md Tashfiq Bin Kashem

Abstract: Dual-material double-gate tunnel field effect transistor (DMDG TFET) is a promising candidate for low-power, high-speed electronics due to enhanced electrostatic control and superior switching characteristics. Integrating a pocket region between the source and channel-doped oppositely to the source-further improves tunneling efficiency by modulating the electric field at the tunneling junction. Th… ▽ More Dual-material double-gate tunnel field effect transistor (DMDG TFET) is a promising candidate for low-power, high-speed electronics due to enhanced electrostatic control and superior switching characteristics. Integrating a pocket region between the source and channel-doped oppositely to the source-further improves tunneling efficiency by modulating the electric field at the tunneling junction. This combined architecture, termed the DMDG source-pocket TFET (DMDG-SP TFET), achieves higher ON current and reduced subthreshold swing compared to conventional TFETs. Previous DMDG-SP TFET designs primarily use heterogeneous gate dielectrics, composed of two stacked insulators to enhance gate control and tunneling modulation. However, such hetero gate dielectrics increase fabrication complexity and may degrade device reliability due to material incompatibility. This work proposes a silicon-based DMDG-SP TFET employing a homogenous gate dielectric, investigated through Silvaco Atlas-based 2-D TCAD simulations, aiming to simplify fabrication without compromising performance. Presence of the pocket results in 6.7x higher ON current and 1.7x lower subthreshold swing compared to pocket-less devices. Dual-material gates boost ON current by 45% and improve the ON/OFF current ratio by 59% compared to single-material gates in pocket-based devices. Detailed simulations analyze effects of gate metal work functions and lengths, gate dielectric constant, and doping densities and lengths of all regions. The optimized device achieves an ON current of 3.16*10^-4 A/um, OFF current of 1.54*10^-17 A/um, ON/OFF ratio of 2.05*10^13, and subthreshold slope of 6.29 mV/decade. These findings offer critical insights for designing manufacturable, high-performance homojunction silicon-based DMDG-SP TFETs with homogeneous gate dielectrics for next-generation low-power integrated circuits. △ Less

Submitted 10 June, 2025; originally announced June 2025.

Studying mirror acceleration via kinetic simulations of relativistic plasma turbulence

Authors: Saikat Das, Siyao Xu, Joonas Nättilä

Abstract: Efficient turbulent acceleration of particles is indicated by recent astrophysical observations, but its mechanism is not well understood. Mirror acceleration has recently been proposed as an efficient mechanism for particle energization in turbulence-compressed magnetic fields. We employ a 3D particle-in-cell (PIC) simulation of pair plasma in magnetized and relativistic turbulence to study this… ▽ More Efficient turbulent acceleration of particles is indicated by recent astrophysical observations, but its mechanism is not well understood. Mirror acceleration has recently been proposed as an efficient mechanism for particle energization in turbulence-compressed magnetic fields. We employ a 3D particle-in-cell (PIC) simulation of pair plasma in magnetized and relativistic turbulence to study this new mechanism and its acceleration efficiency. By tracking individual particles, we see that reversal of a particle's moving direction and significant energy gain can happen during one mirror interaction and within one gyro-orbit. As expected for mirror acceleration, we statistically find that (1) energy gain is preferentially in the direction perpendicular to the local magnetic field and positively correlated with local magnetic field strengthening, and (2) the particle pitch angle distribution becomes increasingly anisotropic toward higher energies, with a concentration at large pitch angles. Our results demonstrate that the mirror acceleration causes a strong confinement of particles by stochastically increasing their pitch angles. This, in turn, facilitates repeated mirror acceleration with the mirroring condition well satisfied. We conclude that mirror acceleration is a promising mechanism accounting for efficient acceleration in magnetized and turbulent astrophysical plasmas. △ Less

Submitted 4 June, 2025; originally announced June 2025.

Comments: 13 pages, 13 figures

Machine-Learned Potentials for Solvation Modeling

Authors: Roopshree Banchode, Surajit Das, Shampa Raghunathan, Raghunathan Ramakrishnan

Abstract: Solvent environments play a central role in determining molecular structure, energetics, reactivity, and interfacial phenomena. However, modeling solvation from first principles remains difficult due to the complex interplay of interactions and unfavorable computational scaling of first-principles treatment with system size. Machine-learned potentials (MLPs) have recently emerged as efficient surr… ▽ More Solvent environments play a central role in determining molecular structure, energetics, reactivity, and interfacial phenomena. However, modeling solvation from first principles remains difficult due to the complex interplay of interactions and unfavorable computational scaling of first-principles treatment with system size. Machine-learned potentials (MLPs) have recently emerged as efficient surrogates for quantum chemistry methods, offering first-principles accuracy at greatly reduced computational cost. MLPs approximate the underlying potential energy surface, enabling efficient computation of energies and forces in solvated systems, and are capable of accounting for effects such as hydrogen bonding, long-range polarization, and conformational changes. This review surveys the development and application of MLPs in solvation modeling. We summarize the theoretical basis of MLP-based energy and force predictions and present a classification of MLPs based on training targets, model types, and design choices related to architectures, descriptors, and training protocols. Integration into established solvation workflows is discussed, with case studies spanning small molecules, interfaces, and reactive systems. We conclude by outlining open challenges and future directions toward transferable, robust, and physically grounded MLPs for solvation-aware atomistic modeling. △ Less

Submitted 29 May, 2025; v1 submitted 28 May, 2025; originally announced May 2025.

Comments: minor edit, Fig. 1 revised

Measurement of cosmic muon-induced events in an HPGe detector using time-coincidence technique

Authors: Roni Dey, Dipanwita Mondal, Sudipta Das, Varchaswi K. S. Kashyap, Bedangadas Mohanty

Abstract: Detailed understanding and suppression of backgrounds are among the key challenges faced by Coherent Elastic Neutrino-Nucleus Scattering (CE\ensuremathνNS) experiments. The sensitivity of these experiments is largely determined by the background levels arising from various sources. Above-ground and shallow-overburden neutrino experiments typically employ passive shielding, primarily composed of le… ▽ More Detailed understanding and suppression of backgrounds are among the key challenges faced by Coherent Elastic Neutrino-Nucleus Scattering (CE\ensuremathνNS) experiments. The sensitivity of these experiments is largely determined by the background levels arising from various sources. Above-ground and shallow-overburden neutrino experiments typically employ passive shielding, primarily composed of lead (Pb), to suppress environmental $γ$ background. However, such shielding can introduce additional backgrounds that are particularly challenging for CE\ensuremathνNS experiments. These backgrounds arise mainly from $γ$ and neutrons produced by cosmic muon interactions in the shielding, and their contribution can become significant depending on the amount of Pb shielding used. In the current work, we measure the yield of secondary particles originating from Pb as a result of high-energy cosmic muon interaction, using a high-purity germanium (HPGe) detector and plastic scintillators. A time-coincidence technique is used to identify and reject these secondary background events from the experimental data. The obtained mean characteristic time of these residual background events is 11 $\pm$ 4 $μ$s, which is consistent with the Geant4-based MC simulation result of 11 $\pm$ 1 $μ$s. The measured efficiency-corrected rate of muon-induced events in the HPGe detector is 34 $\pm$ 1 (stat.) $\pm$ 3 (sys.) day$^{-1}$kg$^{-1}$ within the energy range of 30 keV to 2000 keV. The yield of muon-induced secondary backgrounds in 10 cm thick Pb shielding is evaluated to be $(11 \pm 1 (\text{stat.}) \pm 1 (\text{sys.}))$ secondary events$\thinspace\text{kg}^{-1}\thinspace\mathrm{m^{-2}}\thinspace\text{muon}^{-1}$ at sea level. △ Less

Submitted 23 May, 2025; originally announced May 2025.

Ultrafast excitation of polar skyrons

Authors: Huaiyu Wang, Vladimir Stoica, Cheng Dai, Marek Paściak, Sujit Das, Tiannan Yang, Mauro A. P. Gonçalves, Jiri Kulda, Margaret R. McCarter, Anudeep Mangu, Yue Cao, Hari Padma, Utkarsh Saha, Diling Zhu, Takahiro Sato, Sanghoon Song, Mathias Hoffmann, Patrick Kramer, Silke Nelson, Yanwen Sun, Quynh Nguyen, Zhan Zhang, Ramamoorthy Ramesh, Lane Martin, Aaron M. Lindenberg , et al. (5 additional authors not shown)

Abstract: Unraveling collective modes arising from coupled degrees of freedom is crucial for understanding complex interactions in solids and developing new functionalities. Unique collective behaviors emerge when two degrees of freedom, ordered on distinct length scales, interact. Polar skyrmions, three-dimensional electric polarization textures in ferroelectric superlattices, disrupt the lattice continuit… ▽ More Unraveling collective modes arising from coupled degrees of freedom is crucial for understanding complex interactions in solids and developing new functionalities. Unique collective behaviors emerge when two degrees of freedom, ordered on distinct length scales, interact. Polar skyrmions, three-dimensional electric polarization textures in ferroelectric superlattices, disrupt the lattice continuity at the nanometer scale with nontrivial topology, leading to previously unexplored collective modes. Here, using terahertz-field excitation and femtosecond x-ray diffraction, we discovered subterahertz collective modes, dubbed 'skyrons', which appear as swirling patterns of atomic displacements functioning as atomic-scale gearsets. Momentum-resolved time-domain measurements of diffuse scattering revealed an avoided crossing in the dispersion relation of skyrons. We further demonstrated that the amplitude and dispersion of skyrons can be controlled by sample temperature and electric-field bias. Atomistic simulations and dynamical phase-field modeling provided microscopic insights into the three-dimensional crystallographic and polarization dynamics. The discovery of skyrons and their coupling with terahertz fields opens avenues for ultrafast control of topological polar structures. △ Less

Submitted 19 June, 2025; v1 submitted 15 May, 2025; originally announced May 2025.

Enhanced Spin Pumping and Magnetization dynamics in Ni$_{80}$Fe$_{20}$/MoS$_2$ stack via interface modification

Authors: Mahammad Tahir, Somya Diwakar, Subhakanta Das, Mukul Gupta, Rohit Medwal, Soumik Mukhopadhyay

Abstract: Materials with strong spin orbit coupling (SOC) are essential for realizing spin orbit torque (SOT) based magnetic memory devices. Transition metal dichalcogenides (TMDs) are promising candidates for such appli cations because of their inherently high SOC strength. In this study, we investigate the spin pumping effect at the interface between a monolayer of molybdenum disulfide (ML-MoS$_2$) and Ni… ▽ More Materials with strong spin orbit coupling (SOC) are essential for realizing spin orbit torque (SOT) based magnetic memory devices. Transition metal dichalcogenides (TMDs) are promising candidates for such appli cations because of their inherently high SOC strength. In this study, we investigate the spin pumping effect at the interface between a monolayer of molybdenum disulfide (ML-MoS$_2$) and Ni$_{80}$Fe$_{20}$ (Py) thin films using broadband ferromagnetic resonance (FMR) spectroscopy. FMR measurements reveal a notable enhancement in the effective Gilbert damping factor for the ML-MoS$_2$/Py (Pt = 0 nm) interface compared to the reference Py thin films, attributed to spin pumping across the ML-MoS$_2$/Py interface. To further quantify spin pumping efficiency, we introduce a high SOC platinum (Pt) interlayer at the ML-MoS$_2$/Py interface and systematically vary its thickness. This allows us to evaluate key spin transport parameters, including the enhancement in the effective Gilbert damping parameter, the effective spin mixing conductance that reflects the transfer of spin angular momentum from Py to ML-MoS$_2$ and the effective spin current density. △ Less

Submitted 14 May, 2025; originally announced May 2025.

True Solid-State Electrical Conduction of Proteins shows them to be Efficient Transport Media

Authors: Sudipta Bera, Ayelet Vilan, Sourav Das, Israel Pecht, David Ehre, Mordechai Sheves, David Cahen

Abstract: While solid-state protein junctions have shown efficient electron transport over lengths that surpass those of conventional organic semiconducting systems, interfacial or contact effects may obscure the intrinsic protein charge transport properties. Therefore, contact resistance (RC) effects need to be quantified and then minimized, which poses a problem if 4-probe geometries cannot be used. Here… ▽ More While solid-state protein junctions have shown efficient electron transport over lengths that surpass those of conventional organic semiconducting systems, interfacial or contact effects may obscure the intrinsic protein charge transport properties. Therefore, contact resistance (RC) effects need to be quantified and then minimized, which poses a problem if 4-probe geometries cannot be used. Here we show how RC can be extracted quantitatively from the measured junction resistance (RP) by using the extrapolated zero-length resistance (RZLR) and short-circuit resistance (RS). We used AC (impedance spectroscopy) and DC measurements to examine charge transport in junctions of human serum albumin (HSA) and bacteriorhodopsin (bR) films with varying thicknesses. Three contact configurations, Si-Au, Au-EGaIn, and, in a micropore device (MpD), Au-Pd, were compared. While Si-Au and Au-EGaIn junctions exhibit substantial RC that we ascribe to interfacial oxides and electrostatic protein-electrode interactions, MpD effectively eliminates RC, enabling measuring the intrinsic electron transport across HSA and bR films. The exponential length dependence of RP shows a transport decay constant (beta) that varies with interfacial conditions, underscoring the role of contact engineering. By minimizing RC, exceptionally low beta values (0.7 to 1.1 per nm) are found, proving that, indeed, proteins can have outstanding charge transport efficiencies. △ Less

Submitted 14 April, 2025; originally announced April 2025.

Comments: 42 pages (19 page for main manuscript and 23 page for supporting information), Figures 18, Scheme 2, Table 4, and a ToC

Operational experience and performance of the Silicon Vertex Detector after the first long shutdown of Belle II

Authors: K. Ravindran, K. Adamczyk, H. Aihara, S. Bacher, S. Bahinipati, J. Baudot, P. K. Behera, S. Bettarini, T. Bilka, A. Bozek, F. Buchsteiner, G. Casarosa, C. Cheshta, L. Corona, S. B. Das, G. Dujany, C. Finck, F. Forti, M. Friedl, A. Gabrielli, V. Gautam, B. Gobbo, K. Hara, T. Higuchi, C. Irmler , et al. (40 additional authors not shown)

Abstract: In 2024, the Belle II experiment resumed data taking after the Long Shutdown 1, which was required to install a two-layer pixel detector and upgrade accelerator components. We describe the challenges of this shutdown and the operational experience thereafter. With new data, the silicon-strip vertex detector (SVD) confirmed the high hit efficiency, the large signal-to-noise ratio, and the excellent… ▽ More In 2024, the Belle II experiment resumed data taking after the Long Shutdown 1, which was required to install a two-layer pixel detector and upgrade accelerator components. We describe the challenges of this shutdown and the operational experience thereafter. With new data, the silicon-strip vertex detector (SVD) confirmed the high hit efficiency, the large signal-to-noise ratio, and the excellent cluster position resolution. In the coming years, the SuperKEKB peak luminosity is expected to increase to its target value, resulting in a larger SVD occupancy caused by beam background. Considerable efforts have been made to improve SVD reconstruction software by exploiting the excellent SVD hit-time resolution to determine the collision time and reject off-time particle hits. A novel procedure to group SVD hits event-by-event, based on their time, has been developed using the grouping information during reconstruction, significantly reducing the fake rate while preserving the tracking efficiency. The front-end chip (APV25) is operated in the multi-peak mode, which reads six samples. A 3/6-mixed acquisition mode, based on the timing precision of the trigger, reduces background occupancy, trigger dead-time, and data size. Studies of the radiation damage show that the SVD performance will not seriously degrade during the lifetime of the detector, despite moderate radiation-induced increases in sensor current and strip noise. △ Less

Submitted 24 April, 2025; originally announced April 2025.

Ideal antiferroelectricity with large digital electrostrain in PbZrO3 epitaxial thin films

Authors: Yangyang Si, Ningbo Fan, Yongqi Dong, Zhen Ye, Shiqing Deng, Yijie Li, Chao Zhou, Qibin Zeng, Lu You, Yimei Zhu, Zhenlin Luo, Sujit Das, Laurent Bellaiche, Bin Xu, Huajun Liu, Zuhuang Chen

Abstract: Antiferroelectrics exhibit reversible antipolar-polar phase transitions under electric fields, yielding large electrostrain suitable for electromechanical devices. Nevertheless, in thin-film form, the antiferroelectric behavior is often obscured by competing ferroic orders, resulting in slanted hysteresis loops with undesired remnant polarization, subsequently posing challenges in obtaining ideal… ▽ More Antiferroelectrics exhibit reversible antipolar-polar phase transitions under electric fields, yielding large electrostrain suitable for electromechanical devices. Nevertheless, in thin-film form, the antiferroelectric behavior is often obscured by competing ferroic orders, resulting in slanted hysteresis loops with undesired remnant polarization, subsequently posing challenges in obtaining ideal antiferroelectricity and understanding their intrinsic electrical behavior. Here, atomistic models for controllable antiferroelectric-ferroelectric phase transition pathways are unveiled along specific crystallographic directions. Guided by the anisotropic phase transition and orientation design, we achieved ideal antiferroelectricity with square double hysteresis loop, large saturated polarization (~60 μC/cm2), near-zero remnant polarization, fast response time (~75 ns), and near-fatigue-free performance (~10^10 cycles) in (111)P-oriented PbZrO3 epitaxial thin films. Moreover, a bipolar and frequency-independent digital electrostrain (~0.83%) were demonstrated in this architype antiferroelectric system. In-situ X-ray diffraction studies further reveal that the large digital electrostrain results from intrinsic field-induced antiferroelectric-ferroelectric structural transition. This work demonstrates the anisotropic phase transition mechanism and ideal antiferroelectricity with large digital electrostrain in antiferroelectric thin films, offering a new avenue for applications of antiferroelectricity in nanoelectromechanical systems. △ Less

Submitted 15 April, 2025; originally announced April 2025.

Comments: 22pages, 5 figures

Predicting and Mitigating Agricultural Price Volatility Using Climate Scenarios and Risk Models

Authors: Sourish Das, Sudeep Shukla, Abbinav Sankar Kailasam, Anish Rai, Anirban Chakraborti

Abstract: Agricultural price volatility challenges sustainable finance, planning, and policy, driven by market dynamics and meteorological factors such as temperature and precipitation. In India, the Minimum Support Price (MSP) system acts as implicit crop insurance, shielding farmers from price drops without premium payments. We analyze the impact of climate on price volatility for soybean (Madhya Pradesh)… ▽ More Agricultural price volatility challenges sustainable finance, planning, and policy, driven by market dynamics and meteorological factors such as temperature and precipitation. In India, the Minimum Support Price (MSP) system acts as implicit crop insurance, shielding farmers from price drops without premium payments. We analyze the impact of climate on price volatility for soybean (Madhya Pradesh), rice (Assam), and cotton (Gujarat). Using ERA5-Land reanalysis data from the Copernicus Climate Change Service, we analyze historical climate patterns and evaluate two scenarios: SSP2.4.5 (moderate case) and SSP5.8.5 (severe case). Our findings show that weather conditions strongly influence price fluctuations and that integrating meteorological data into volatility models enhances risk-hedging. Using the Exponential Generalized Autoregressive Conditional Heteroskedasticity (EGARCH) model, we estimate conditional price volatility and identify cross-correlations between weather and price volatility movements. Recognizing MSP's equivalence to a European put option, we apply the Black-Scholes model to estimate its implicit premium, quantifying its fiscal cost. We propose this novel market-based risk-hedging mechanism wherein the government purchases insurance equivalent to MSP, leveraging Black-Scholes for accurate premium estimation. Our results underscore the importance of meteorological data in agricultural risk modeling, supporting targeted insurance and strengthening resilience in agricultural finance. This climate-informed financial framework enhances risk-sharing, stabilizes prices, and informs sustainable agricultural policy under growing climate uncertainty. △ Less

Submitted 31 March, 2025; originally announced March 2025.

Comments: 10 pages, 5 figures

Federated Self-Supervised Learning for One-Shot Cross-Modal and Cross-Imaging Technique Segmentation

Authors: Siladittya Manna, Suresh Das, Sayantari Ghosh, Saumik Bhattacharya

Abstract: Decentralized federated learning enables learning of data representations from multiple sources without compromising the privacy of the clients. In applications like medical image segmentation, where obtaining a large annotated dataset from a single source is a distressing problem, federated self-supervised learning can provide some solace. In this work, we push the limits further by exploring a f… ▽ More Decentralized federated learning enables learning of data representations from multiple sources without compromising the privacy of the clients. In applications like medical image segmentation, where obtaining a large annotated dataset from a single source is a distressing problem, federated self-supervised learning can provide some solace. In this work, we push the limits further by exploring a federated self-supervised one-shot segmentation task representing a more data-scarce scenario. We adopt a pre-existing self-supervised few-shot segmentation framework CoWPro and adapt it to the federated learning scenario. To the best of our knowledge, this work is the first to attempt a self-supervised few-shot segmentation task in the federated learning domain. Moreover, we consider the clients to be constituted of data from different modalities and imaging techniques like MR or CT, which makes the problem even harder. Additionally, we reinforce and improve the baseline CoWPro method using a fused dice loss which shows considerable improvement in performance over the baseline CoWPro. Finally, we evaluate this novel framework on a completely unseen held-out part of the local client dataset. We observe that the proposed framework can achieve performance at par or better than the FedAvg version of the CoWPro framework on the held-out validation dataset. △ Less

Submitted 30 March, 2025; originally announced March 2025.

The 2D Materials Roadmap

Authors: Wencai Ren, Peter Bøggild, Joan Redwing, Kostya Novoselov, Luzhao Sun, Yue Qi, Kaicheng Jia, Zhongfan Liu, Oliver Burton, Jack Alexander-Webber, Stephan Hofmann, Yang Cao, Yu Long, Quan-Hong Yang, Dan Li, Soo Ho Choi, Ki Kang Kim, Young Hee Lee, Mian Li, Qing Huang, Yury Gogotsi, Nicholas Clark, Amy Carl, Roman Gorbachev, Thomas Olsen , et al. (48 additional authors not shown)

Abstract: Over the past two decades, 2D materials have rapidly evolved into a diverse and expanding family of material platforms. Many members of this materials class have demonstrated their potential to deliver transformative impact on fundamental research and technological applications across different fields. In this roadmap, we provide an overview of the key aspects of 2D material research and developme… ▽ More Over the past two decades, 2D materials have rapidly evolved into a diverse and expanding family of material platforms. Many members of this materials class have demonstrated their potential to deliver transformative impact on fundamental research and technological applications across different fields. In this roadmap, we provide an overview of the key aspects of 2D material research and development, spanning synthesis, properties and commercial applications. We specifically present roadmaps for high impact 2D materials, including graphene and its derivatives, transition metal dichalcogenides, MXenes as well as their heterostructures and moiré systems. The discussions are organized into thematic sections covering emerging research areas (e.g., twisted electronics, moiré nano-optoelectronics, polaritronics, quantum photonics, and neuromorphic computing), breakthrough applications in key technologies (e.g., 2D transistors, energy storage, electrocatalysis, filtration and separation, thermal management, flexible electronics, sensing, electromagnetic interference shielding, and composites) and other important topics (computational discovery of novel materials, commercialization and standardization). This roadmap focuses on the current research landscape, future challenges and scientific and technological advances required to address, with the intent to provide useful references for promoting the development of 2D materials. △ Less

Submitted 28 April, 2025; v1 submitted 28 March, 2025; originally announced March 2025.

Comments: 97 pages, to be published in 2D Materials

Unlocking Inverted Singlet-Triplet Gap in Alternant Hydrocarbons with Heteroatoms

Authors: Atreyee Majumdar, Surajit Das, Raghunathan Ramakrishnan

Abstract: Fifth-generation organic light-emitting diodes exhibit delayed fluorescence even at low temperatures, enabled by exothermic reverse intersystem crossing from a negative singlet-triplet gap (STG), where the first excited singlet lies anomalously below the triplet. This phenomenon -- termed delayed fluorescence from inverted singlet and triplet states (DFIST) -- has been experimentally confirmed onl… ▽ More Fifth-generation organic light-emitting diodes exhibit delayed fluorescence even at low temperatures, enabled by exothermic reverse intersystem crossing from a negative singlet-triplet gap (STG), where the first excited singlet lies anomalously below the triplet. This phenomenon -- termed delayed fluorescence from inverted singlet and triplet states (DFIST) -- has been experimentally confirmed only in two triangular molecules with a 12-annulene periphery and a central nitrogen atom. Here, we report a high-throughput virtual screening of 30,797 BN-substituted polycyclic aromatic hydrocarbons derived from 77 parent scaffolds (2--6 rings). Using a multi-level workflow combining structural stability criteria with accurate L-CC2 excited-state calculations, we identify 72 heteroaromatic candidates with STGs$<0$. Notably, this includes BN-helicenes, where inversion arises from through-space charge-transfer states. Several systems exhibit non-zero oscillator strengths, supporting their potential as fluorescent emitters. Our findings reveal new design motifs for DFIST beyond known frameworks, expanding the chemical space for next-generation emitters based on heteroatom-embedded aromatic systems. △ Less

Submitted 26 March, 2025; originally announced March 2025.

Comments: First draft (SI not included)

Causal Links Between Anthropogenic Emissions and Air Pollution Dynamics in Delhi

Authors: Sourish Das, Sudeep Shukla, Alka Yadav, Anirban Chakraborti

Abstract: Air pollution poses significant health and environmental challenges, particularly in rapidly urbanizing regions. Delhi-National Capital Region experiences air pollution episodes due to complex interactions between anthropogenic emissions and meteorological conditions. Understanding the causal drivers of key pollutants such as $PM_{2.5}$ and ground $O_3$ is crucial for developing effective mitigati… ▽ More Air pollution poses significant health and environmental challenges, particularly in rapidly urbanizing regions. Delhi-National Capital Region experiences air pollution episodes due to complex interactions between anthropogenic emissions and meteorological conditions. Understanding the causal drivers of key pollutants such as $PM_{2.5}$ and ground $O_3$ is crucial for developing effective mitigation strategies. This study investigates the causal links of anthropogenic emissions on $PM_{2.5}$ and $O_3$ concentrations using predictive modeling and causal inference techniques. Integrating high-resolution air quality data from Jan 2018 to Aug 2023 across 32 monitoring stations, we develop predictive regression models that incorporate meteorological variables (temperature and relative humidity), pollutant concentrations ($NO_2, SO_2, CO$), and seasonal harmonic components to capture both diurnal and annual cycles. Here, we show that reductions in anthropogenic emissions lead to significant decreases in $PM_{2.5}$ levels, whereas their effect on $O_3$ remains marginal and statistically insignificant. To address spatial heterogeneity, we employ Gaussian Process modeling. Further, we use Granger causality analysis and counterfactual simulation to establish direct causal links. Validation using real-world data from the COVID-19 lockdown confirms that reduced emissions led to a substantial drop in $PM_{2.5}$ but only a slight, insignificant change in $O_3$. The findings highlight the necessity of targeted emission reduction policies while emphasizing the need for integrated strategies addressing both particulate and ozone pollution. These insights are crucial for policymakers designing air pollution interventions in other megacities, and offer a scalable methodology for tackling complex urban air pollution through data-driven decision-making. △ Less

Submitted 24 March, 2025; originally announced March 2025.

Comments: 16 pages, 10 figures

Velocity Map Imaging Spectrometer Optimized for Reduction of Background from Scattered UV Light

Authors: Nicolas Ladda, Fabian Westmeier, Sagnik Das, Wilfried Dreher, Simon T. Ranecky, Tonio Rosen, Krishna Kant Singh, Till Jakob Stehling, Sudheendran Vasudevan, Hendrike Braun, Thomas Baumert, Jochen Mikosch, Arne Senftleben

Abstract: Velocity map imaging spectroscopy is a powerful technique for detecting the momentum distribution of photoelectrons resulting from an ionization experiment on atoms or molecules. However, when used with ultraviolet light sources, scattered photons can lead to the emission of photoelectrons from the spectrometer's electrodes, giving rise to severe noise disturbing the desired signal. We present a v… ▽ More Velocity map imaging spectroscopy is a powerful technique for detecting the momentum distribution of photoelectrons resulting from an ionization experiment on atoms or molecules. However, when used with ultraviolet light sources, scattered photons can lead to the emission of photoelectrons from the spectrometer's electrodes, giving rise to severe noise disturbing the desired signal. We present a velocity map imaging spectrometer optimized to reduce unwanted background signals. The primary modifications to the conventional design include spectrometer electrode geometries with small cross section exposed to the scattered photons, with blocked pathways for photoelectrons from the electrodes to the detector, as well as the incorporation of optical baffles. Compared to a conventional design optimized solely on the spectrometer's photoelectron momentum resolution, we have achieved the elimination of 99.9 \% of the background noise without substantial compromise to the resolution. Note that most of the improvements were achieved without the necessity of high-grade windows, reducing the sensitivity to window degradation by UV light. We give general guidelines on efficiently coping with the long-standing experimental problem of electron background originating from scattered light by considering it already in the design stage of a new spectrometer. △ Less

Submitted 20 March, 2025; originally announced March 2025.

Excited state assignment and state-resolved photoelectron circular dichroism in chalcogen-substituted fenchones

Authors: Sudheendran Vasudevan, Steffen M. Giesen, Simon T. Ranecky, Lutz Marder, Igor Vidanović, Manjinder Kour, Catmarna Küstner-Wetekam, Nicolas Ladda, Sagnik Das, Tonio Rosen, Vidana Popkova, Hangyeol Lee, Denis Kargin, Tim Schäfer, Andreas Hans, Thomas Baumert, Robert Berger, Hendrike Braun, Arno Ehresmann, Guido W. Fuchs, Thomas F. Giesen, Jochen Mikosch, Rudolf Pietschnig, Arne Senftleben

Abstract: Excited electronic states of fenchone, thiofenchone, and selenofenchone are characterized and assigned with different gas-phase spectroscopic methods and \textit{ab initio} quantum chemical calculations. With an increasing atomic number of the chalcogen, we observe increasing bathochromic (red) shifts, which vary in strength for Rydberg states, valence-excited states, and ionization energies. The… ▽ More Excited electronic states of fenchone, thiofenchone, and selenofenchone are characterized and assigned with different gas-phase spectroscopic methods and \textit{ab initio} quantum chemical calculations. With an increasing atomic number of the chalcogen, we observe increasing bathochromic (red) shifts, which vary in strength for Rydberg states, valence-excited states, and ionization energies. The spectroscopic insight is used to state-resolve the contributions in multi-photon photoelectron circular dichroism with femtosecond laser pulses. This is shown to be a sensitive observable of molecular chirality in all studied chalcogenofenchones. Our work contributes new spectroscopic information, particularly on thiofenchone and selenofenchone. It may open a perspective for future coherent control experiments exploiting resonances in the visible and or near-ultraviolet spectral regions. △ Less

Submitted 6 May, 2025; v1 submitted 18 March, 2025; originally announced March 2025.

The Impact of Meteorological Factors on Crop Price Volatility in India: Case studies of Soybean and Brinjal

Authors: Ashok Kumar, Abbinav Sankar Kailasam, Anish Rai, Manya Khanna, Sudeep Shukla, Sourish Das, Anirban Chakraborti

Abstract: Climate is an evolving complex system with dynamic interactions and non-linear feedback mechanisms, shaping environmental and socio-economic outcomes. Crop production is highly sensitive to climatic fluctuations (and many other environmental, social and governance factors). This paper studies the price volatility of agricultural crops as influenced by meteorological variables, which is critical fo… ▽ More Climate is an evolving complex system with dynamic interactions and non-linear feedback mechanisms, shaping environmental and socio-economic outcomes. Crop production is highly sensitive to climatic fluctuations (and many other environmental, social and governance factors). This paper studies the price volatility of agricultural crops as influenced by meteorological variables, which is critical for agricultural planning, sustainable finance and policy-making. As case studies, we choose the two Indian states: Madhya Pradesh (for Soybean) and Odisha (for Brinjal/Eggplant). We employ an Exponential Generalized Autoregressive Conditional Heteroskedasticity (EGARCH) model to estimate the conditional volatility of the log returns from 2012 to 2024. We further explore the cross-correlations between price volatility and the meteorological variables followed by a Granger-causal test to analyze the causal effect of meteorological variables on the volatility. The Seasonal Auto-Regressive Integrated Moving Average with Exogenous Regressors (SARIMAX) and Long Short-Term Memory (LSTM) models are implemented as simple machine learning models of price volatility with meteorological factors as exogenous variables. Finally, to capture spatial dependencies in volatility across districts, we extend the analysis using a Conditional Autoregressive (CAR) model to construct monthly volatility surfaces that reflect both local price risk as well as geographic dependence. We believe, this paper will illustrate the usefulness of simple machine learning models in agricultural finance, and help the farmers to make informed decisions by considering climate patterns and making beneficial decisions with regard to crop rotation or allocations. In general, incorporating meteorological factors to assess agricultural performance could help to understand and reduce price volatility and possibly lead to economic stability. △ Less

Submitted 25 June, 2025; v1 submitted 6 March, 2025; originally announced March 2025.

Comments: 19 pages, 11 figures

COCOA: a compact Compton camera for astrophysical observation of MeV-scale gamma rays

Authors: LiquidO Collaboration, S. R. Soleti, J. J. Gómez-Cadenas, J. Apilluelo, L. Asquith, E. F. Bannister, N. P. Barradas, C. L. Baylis, J. L. Beney, M. Berberan e Santos, X. de la Bernardie, T. J. C. Bezerra, M. Bongrand, C. Bourgeois, D. Breton, J. Busto, K. Burns, A. Cabrera, A. Cadiou, E. Calvo, M. de Carlos Generowicz, E. Chauveau, B. J. Cattermole, M. Chen, P. Chimenti , et al. (67 additional authors not shown)

Abstract: COCOA (COmpact COmpton cAmera) is a next-generation gamma-ray telescope designed for astrophysical observations in the MeV energy range. The detector comprises a scatterer volume employing the LiquidO detection technology and an array of scintillating crystals acting as absorber. Surrounding plastic scintillator panels serve as a veto system for charged particles. The detector's compact, scalable… ▽ More COCOA (COmpact COmpton cAmera) is a next-generation gamma-ray telescope designed for astrophysical observations in the MeV energy range. The detector comprises a scatterer volume employing the LiquidO detection technology and an array of scintillating crystals acting as absorber. Surrounding plastic scintillator panels serve as a veto system for charged particles. The detector's compact, scalable design enables flexible deployment on microsatellites or high-altitude balloons. Gamma rays at MeV energies have not been well explored historically (the so-called "MeV gap") and COCOA has the potential to improve the sensitivity in this energy band. △ Less

Submitted 12 May, 2025; v1 submitted 28 February, 2025; originally announced February 2025.

Comments: 14 pages, 17 figures

Journal ref: Astropart. Phys. 172 (2025) 103135

Arctic teleconnection on climate and ozone pollution in the polar jet stream path of eastern US

Authors: K Shuvo Bakar, Sourish Das, Sudeep Shukla, Anirban Chakraborti

Abstract: Arctic sea ice is in reduction and has been a key significant indicator of climate change. In this paper, we explore Arctic Sea ice extent data to identify teleconnection with weather change in the polar and sub-tropical jet stream intersection in eastern United States (US) and hence the potential influence in ground level ozone pollution. Several statistical methods including Bayesian techniques… ▽ More Arctic sea ice is in reduction and has been a key significant indicator of climate change. In this paper, we explore Arctic Sea ice extent data to identify teleconnection with weather change in the polar and sub-tropical jet stream intersection in eastern United States (US) and hence the potential influence in ground level ozone pollution. Several statistical methods including Bayesian techniques such as: spatio-temporal modelling and Bayesian network are implemented to identify the teleconnection and also validated based on theories in atmospheric science. We observe that the teleconnection is relatively strong in autumn, winter and spring seasons compared to the summer. Furthermore, the sudden decremental effect of Arctic sea-ice extent in mid-2000s has a shifting influence in ozone pollutions compared to the previous years. A similar downward shift in the Arctic sea-ice extent has been projected in 2030. These findings indicate to initiate further strategic policies for the Arctic influence, ozone concentrations together the seasonal and global changing patterns of climate. △ Less

Submitted 26 February, 2025; originally announced February 2025.

Comments: 19 pages, 6 figures

Engineering 2D Van der Waals Electrode via MBE Grown Weyl Semimetal 1T-WTe2 for Enhanced Photodetection in InSe

Authors: Biswajit Khan, Santanu Kandar, Taslim Khan, Kritika Bhattacharya, Nahid Chowdahury, Suprovat Ghosh, Pawan Kumar, Rajendra Singh, Samaresh Das

Abstract: Achieving low contact resistance in advanced electronic devices remains a significant challenge. As the demand for faster and more energy-efficient devices grows, 2D contact engineering emerges as a promising solution for next-generation electronics. Beyond graphene, 1T-WTe2 has gained attention due to its outstanding electrical transport properties, quantum phenomena, and Weyl semimetallic charac… ▽ More Achieving low contact resistance in advanced electronic devices remains a significant challenge. As the demand for faster and more energy-efficient devices grows, 2D contact engineering emerges as a promising solution for next-generation electronics. Beyond graphene, 1T-WTe2 has gained attention due to its outstanding electrical transport properties, quantum phenomena, and Weyl semimetallic characteristics. We demonstrate the direct wafer-scale growth of 1T-WTe2 via molecular beam epitaxy (MBE) and use it as a 2D contact for layered materials like InSe, which exhibits broad photoresponsivity. The performance of this 2D electrode in InSe-based photodetectors is compared with conventional metal electrodes. Under near-infrared (NIR) to deep ultraviolet (DUV) illumination, the InSe/1T-WTe2 configuration shows a broad photoresponsivity range from 0.14 to 217.58 A/W, with fast rise/fall times of 42/126 ms in the visible region. In contrast, the InSe/Ti-Au configuration exhibits a peak photoresponsivity of 3.64 A/W in the DUV range, with an overall lower responsivity spanning from 0.000865 A/W to 3.64 A/W under NIR and DUV illumination, respectively. Additionally, in the visible regime, it exhibits slower rise and fall times of 150 ms and 144 ms, respectively, compared to InSe/1T-WTe2. These findings indicate that MBE-grown 1T-WTe2 serves as an effective 2D electrode, delivering higher photoresponsivity and faster photodetection compared to traditional metal contacts. This approach offers a simplified, high-performance alternative for layered material-based devices, eliminating the need for complex heterostructure configurations. △ Less

Submitted 18 February, 2025; originally announced February 2025.

Comments: 8 figures

Recovering Ion Distribution Functions: I. Slepian Reconstruction of VDFs from MMS and Solar Orbiter

Authors: Srijan Bharati Das, Michael Terres

Abstract: Plasma velocity distribution functions (VDFs) constitute a fundamental observation of numerous operational and future missions. An efficient parameterization of VDFs is crucial for (1) preserving enough information to investigate macroscopic moments along with kinetic effects, (2) producing smooth distributions whereby it is possible to perform derivatives in phase space to support numerical solve… ▽ More Plasma velocity distribution functions (VDFs) constitute a fundamental observation of numerous operational and future missions. An efficient parameterization of VDFs is crucial for (1) preserving enough information to investigate macroscopic moments along with kinetic effects, (2) producing smooth distributions whereby it is possible to perform derivatives in phase space to support numerical solvers, and (3) economic data management and its storage. Previous studies have used spherical harmonics as an efficient basis for representing electron VDFs. In this paper, we present a novel algorithm targeted towards decomposing ion VDFs measured by electrostatic analyzers onboard Magnetospheric Multiscale Mission (MMS) and Solar Orbiter (SolO) spacecrafts. We use Slepian functions, custom-designed bases providing compact support in phase space, initially developed in information theory and later used for terrestrial and planetary applications. In this paper, we choose well-studied, well-measured, and complex intervals from MMS and SolO containing a range of simpler gyrotropic and agyrotropic distributions to benchmark the robustness of our reconstruction method. We demonstrate the advantages of using Slepian functions over spherical harmonics for solar wind plasma distributions. We also demonstrate that our choice of basis representation efficiently preserves phase space complexities of a 3D agyrotropic distribution function. This algorithm shown in this study will be extended to Parker Solar Probe and future missions such as Helioswarm. △ Less

Submitted 5 March, 2025; v1 submitted 28 January, 2025; originally announced January 2025.

Comments: 15 pages, 7 figures (accepted to be published in The Astrophysical Journal)

Dynamic Metal-Support Interaction Dictates Cu Nanoparticle Sintering on Al$_2$O$_3$ Surfaces

Authors: Jiayan Xu, Shreeja Das, Amar Deep Pathak, Abhirup Patra, Sharan Shetty, Detlef Hohl, Roberto Car

Abstract: Nanoparticle sintering remains a critical challenge in heterogeneous catalysis. In this work, we present a unified deep potential (DP) model for Cu nanoparticles on three Al$_2$O$_3$ surfaces ($γ$-Al$_2$O$_3$(100), $γ$-Al$_2$O$_3$(110), and $α$-Al$_2$O$_3$(0001)). Using DP-accelerated simulations, we reveal striking facet-dependent nanoparticle stability and mobility patterns across the three surf… ▽ More Nanoparticle sintering remains a critical challenge in heterogeneous catalysis. In this work, we present a unified deep potential (DP) model for Cu nanoparticles on three Al$_2$O$_3$ surfaces ($γ$-Al$_2$O$_3$(100), $γ$-Al$_2$O$_3$(110), and $α$-Al$_2$O$_3$(0001)). Using DP-accelerated simulations, we reveal striking facet-dependent nanoparticle stability and mobility patterns across the three surfaces. The nanoparticles diffuse several times faster on $α$-Al$_2$O$_3$(0001) than on $γ$-Al$_2$O$_3$(100) at 800 K while expected to be more sluggish based on their larger binding energy at 0 K. Diffusion is facilitated by dynamic metal-support interaction (MSI), where the Al atoms switch out of the surface plane to optimize contact with the nanoparticle and relax back to the plane as the nanoparticle moves away. In contrast, the MSI on $γ$-Al$_2$O$_3$(100) and on $γ$-Al$_2$O$_3$(110) is dominated by more stable and directional Cu-O bonds, consistent with the limited diffusion observed on these surfaces. Our extended long-time MD simulations provide quantitative insights into the sintering processes, showing that the dispersity of nanoparticles (the initial inter-nanoparticle distance) strongly influences coalescence driven by nanoparticle diffusion. We observed that the coalescence of Cu$_{13}$ nanoparticles on $α$-Al$_2$O$_3$(0001) can occur in a short time (10 ns) at 800 K even with an initial inter-nanoparticle distance increased to 30 Å, while the coalescence on $γ$-Al$_2$O$_3$(100) is inhibited significantly by increasing the initial inter-nanoparticle distance from 15 Å to 30 Å. These findings demonstrate that the dynamics of the supporting surface is crucial to understanding the sintering mechanism and offer guidance for designing sinter-resistant catalysts by engineering the support morphology. △ Less

Submitted 28 January, 2025; v1 submitted 21 January, 2025; originally announced January 2025.

Comments: 33 pages, 5 figures; update plot style of fig. 3

Fatigue-free ferroelectricity in Hf0.5Zr0.5O2 ultrathin films via interfacial design

Authors: Chao Zhou, Yanpeng Feng, Liyang Ma, Haoliang Huang, Yangyang Si, Hailin Wang, Sizhe Huang, Jingxuan Li, Chang-Yang Kuo, Sujit Das, Yunlong Tang, Shi Liu, Zuhuang Chen

Abstract: Due to traits of CMOS compatibility and scalability, HfO2-based ferroelectrics are promising candidates for next-generation memory devices. However, their commercialization has been greatly hindered by reliability issues, with fatigue being a major impediment. We report the fatigue-free behavior in interface-designed Hf0.5Zr0.5O2-based heterostructures. A coherent CeO2-x/Hf0.5Zr0.5O2 heterointerfa… ▽ More Due to traits of CMOS compatibility and scalability, HfO2-based ferroelectrics are promising candidates for next-generation memory devices. However, their commercialization has been greatly hindered by reliability issues, with fatigue being a major impediment. We report the fatigue-free behavior in interface-designed Hf0.5Zr0.5O2-based heterostructures. A coherent CeO2-x/Hf0.5Zr0.5O2 heterointerface is constructed, wherein CeO2-x acts as an oxygen sponge, capable of reversibly accepting and releasing oxygen vacancies. This design effectively alleviates defect aggregation at the electrode-ferroelectric interface, enabling improved switching characteristics. Further, a symmetric capacitor architecture is designed to minimize the imprint, thereby suppressing the cycling-induced oriented defect drift. The two-pronged technique mitigates oxygen-voltammetry-generated chemical/energy fluctuations, suppressing the formation of paraelectric phase and polarization degradation. The design ensures a fatigue-free feature exceeding 10^11 switching cycles and an endurance lifetime surpassing 10^12 cycles for Hf0.5Zr0.5O2-based capacitors, along with excellent temperature stability and retention. These findings pave the way for developing ultra-stable hafnia-based ferroelectric devices. △ Less

Submitted 12 January, 2025; originally announced January 2025.

Comments: 20 pages, 4 figures

Physical and chemical characterization of Saccharum spontaneum flower fibre: potential applications in thermal insulation and microbial fuel cells

Authors: M. M. Rahman, A. K. Das, S. Tabassum, S. C. Das, M. A. Uddin

Abstract: Saccharum spontaneum is a grass-type plant abundantly found in the Indian subcontinent, known for its beautiful, lustrous white flowers. Fibres were extracted from the flower and analyzed for their physical, mechanical, and chemical properties. The chemical composition of the fibre is 90.9% holocellulose, with a moisture content of 10.97%, and an average fibre length of 25 mm. FTIR spectra confirm… ▽ More Saccharum spontaneum is a grass-type plant abundantly found in the Indian subcontinent, known for its beautiful, lustrous white flowers. Fibres were extracted from the flower and analyzed for their physical, mechanical, and chemical properties. The chemical composition of the fibre is 90.9% holocellulose, with a moisture content of 10.97%, and an average fibre length of 25 mm. FTIR spectra confirmed the presence of functional groups similar to those found in other natural cellulosic fibres. Additionally, the fibre exhibits a tensile strength of approximately 63 cN/tex, which is significantly higher than that of cotton and jute fibres. However, its crystallinity is relatively high at about 75%, resulting in a low elongation at break of 1.9%. FESEM analysis revealed a hollow structure in the fibre, indicating its potential suitability for applications requiring high thermal insulation, excellent moisture management, vapor permeability, and microbial fuel cell development. △ Less

Submitted 9 January, 2025; originally announced January 2025.

Spectral bounds on the entropy flow rate and Lyapunov exponents in differentiable dynamical systems

Authors: Swetamber Das, Jason R. Green

Abstract: Some microscopic dynamics are also macroscopically irreversible, dissipating energy and producing entropy. For many-particle systems interacting with deterministic thermostats, the rate of thermodynamic entropy dissipated to the environment is the average rate at which phase space contracts. Here, we use this identity and the properties of a classical density matrix to derive upper and lower bound… ▽ More Some microscopic dynamics are also macroscopically irreversible, dissipating energy and producing entropy. For many-particle systems interacting with deterministic thermostats, the rate of thermodynamic entropy dissipated to the environment is the average rate at which phase space contracts. Here, we use this identity and the properties of a classical density matrix to derive upper and lower bounds on the entropy flow rate with the spectral properties of the local stability matrix. These bounds are an extension of more fundamental bounds on the Lyapunov exponents and phase space contraction rate of continuous-time dynamical systems. They are maximal and minimal rates of entropy production, heat transfer, and transport coefficients set by the underlying dynamics of the system and deterministic thermostat. Because these limits on the macroscopic dissipation derive from the density matrix and the local stability matrix, they are numerically computable from the molecular dynamics. As an illustration, we show that these bounds are on the electrical conductivity for a system of charged particles subject to an electric field. △ Less

Submitted 10 January, 2025; v1 submitted 8 January, 2025; originally announced January 2025.

Comments: Published in J. Phys. A: Math. Theor., unnecessary autolinking in the abstract removed

Journal ref: J. Phys. A: Math. Theor. 58 035003 (2025)

First result from tetrafluoroethane (C$_2$H$_2$F$_4$) superheated emulsion detector for dark matter search at JUSL

Authors: V. Kumar, S. Ali, M. Das, N. Biswas, S. Das, S. Sahoo, N. Chaddha, J. Basu, V. N. Jha

Abstract: The superheated emulsion detector consisting of the droplets of tetra-fluoroethane (C2HC$_2$H$_2$F$_4$2F4) has been fabricated at the laboratory and installed at the 555m deep underground laboratory, JUSL during July to Dec 2022. The 500ml detector ran for an effective period of 48.6 days at a threshold of 5.87 keV with an exposure of 2.47 kg-days. The acoustic signals produced due to the bubble n… ▽ More The superheated emulsion detector consisting of the droplets of tetra-fluoroethane (C2HC$_2$H$_2$F$_4$2F4) has been fabricated at the laboratory and installed at the 555m deep underground laboratory, JUSL during July to Dec 2022. The 500ml detector ran for an effective period of 48.6 days at a threshold of 5.87 keV with an exposure of 2.47 kg-days. The acoustic signals produced due to the bubble nucleation were collected by the acoustic sensor and FPGAbased data acquisition system. The data shows a minimum sensitivity of SI-nucleon for carbon at WIMP mass of 22.81 GeV/c$^2$ and SD (p) for fluorine at 30.67 GeV/c$^2$. The threshold of WIMP mass is 5.16 GeV/c$^2$ for F and 4.44 GeV/c$^2$ for C at the operating threshold of 5.87 keV. The first result of the dark matter direct search experiment named InDEx with tetra-fluoro-ethane active liquid from JUSL underground laboratory is reported in this article. △ Less

Submitted 6 January, 2025; originally announced January 2025.

A magneto-ionic synapse for reservoir computing

Authors: Sreeveni Das, Rhodri Mansell, Lukáš Flajšman, Maria-Andromachi Syskaki, Jürgen Langer, Sebastiaan van Dijken

Abstract: Neuromorphic computing aims to revolutionize large-scale data processing by developing efficient methods and devices inspired by neural networks. Among these, the control of magnetism through ion migration has emerged as a promising approach due to the inherent memory and nonlinearity of ionically conducting and magnetic materials. In this work, we present a lithium-ion-based magneto-ionic device… ▽ More Neuromorphic computing aims to revolutionize large-scale data processing by developing efficient methods and devices inspired by neural networks. Among these, the control of magnetism through ion migration has emerged as a promising approach due to the inherent memory and nonlinearity of ionically conducting and magnetic materials. In this work, we present a lithium-ion-based magneto-ionic device that uses applied voltages to control the magnetic domain state of a perpendicularly magnetized ferromagnetic layer. This behavior emulates the analog and non-volatile properties of biological synapses and enables the creation of a simple reservoir computing system. To illustrate its capabilities, the device is used in a waveform classification task, where the voltage amplitude range and magnetic bias field are tuned to optimize the recognition accuracy. △ Less

Submitted 15 December, 2024; originally announced December 2024.

Comments: 11 pages, 7 figures

Tailored 1D/2D Van der Waals Heterostructures for Unified Analog and Digital Electronics

Authors: Bipul Karmakar, Bikash Das, Shibnath Mandal, Rahul Paramanik, Sujan Maity, Tanima Kundu, Soumik Das, Mainak Palit, Koushik Dey, Kapildeb Dolui, Subhadeep Datta

Abstract: We report a sequential two-step vapor deposition process for growing mixed-dimensional van der Waals (vdW) materials, specifically Te nanowires (1D) and MoS$_2$ (2D), on a single SiO$_2$ wafer. Our growth technique offers a unique potential pathway to create large scale, high-quality, defect-free interfaces. The assembly of samples serves a twofold application: first, the as-prepared heterostructu… ▽ More We report a sequential two-step vapor deposition process for growing mixed-dimensional van der Waals (vdW) materials, specifically Te nanowires (1D) and MoS$_2$ (2D), on a single SiO$_2$ wafer. Our growth technique offers a unique potential pathway to create large scale, high-quality, defect-free interfaces. The assembly of samples serves a twofold application: first, the as-prepared heterostructures (Te NW/MoS$_2$) provide insights into the atomically thin depletion region of a 1D/2D vdW diode, as revealed by electrical transport measurements and density functional theory-based quantum transport calculations. The charge transfer at the heterointerface is confirmed using Raman spectroscopy and Kelvin probe force microscopy (KPFM). We also observe modulation of the rectification ratio with varying applied gate voltage. Second, the non-hybrid regions on the substrate, consisting of the as-grown individual Te nanowires and MoS$_2$ microstructures, are utilized to fabricate separate p- and n-FETs, respectively. Furthermore, the ionic liquid gating helps to realize low-power CMOS inverter and all basic logic gate operations using a pair of n- and p- field-effect transistors (FETs) on Si/SiO$_2$ platform. This approach also demonstrates the potential for unifying diode and CMOS circuits on a single platform, opening opportunities for integrated analog and digital electronics. △ Less

Submitted 12 December, 2024; originally announced December 2024.

Solar GES-structure modified with EiBI gravity

Authors: Souvik Das, Pralay Kumar Karmakar

Abstract: In the post-Newtonian era, the Eddington-inspired Born-Infeld (EiBI) theory, considered as an improved modification of the Einsteinian general relativity formalism in the weak field regime (non-relativistic), has enabled us to study the dynamics of dense astroobjects in light of the modified gravitational effects. This EiBI theory imparts a new shape to the usual gravitational Poisson equation thr… ▽ More In the post-Newtonian era, the Eddington-inspired Born-Infeld (EiBI) theory, considered as an improved modification of the Einsteinian general relativity formalism in the weak field regime (non-relativistic), has enabled us to study the dynamics of dense astroobjects in light of the modified gravitational effects. This EiBI theory imparts a new shape to the usual gravitational Poisson equation through the addition of a cosmological correction factor, termed as the EiBI gravity parameter. A systematic inclusion of this gravity in the basic structure equation could lead to a realistic picture of the existing solar models free from any end-stage singularity. A theoretic model is accordingly proposed to investigate the effect of the EiBI gravity on the Gravito-Electrostatic Sheath (GES) formalism of the equilibrium solar plasma structure. This study shows that the GES-based solar plasma dynamics is noticeably modified against the previously reported Newtonian GES-model studies. An equilibrium bounded solution for the solar self-gravity shows the EiBI-modified solar surface boundary (SSB) to exist at a new helio-centric radial location $ξ= 4$ (on the Jeansean scale). It is found that the EiBI gravity shifts the present SSB outwards by 14.28% relative to the original Newtonian SSB. The EiBI-modified gravity effects on diverse relevant solar parameters, such as the gravito-electrostatic potentials, fields, and Mach numbers, are illustratively analyzed. It is anticipated that our analyses could be applied further to see the solar plasma equilibrium and fluctuation dynamics in realistically modified post-Newtonian gravity environments on both the bounded (interior) and unbounded (exterior) solar plasma scales. △ Less

Submitted 2 December, 2024; originally announced December 2024.

Comments: 14 pages, 5 figures, Published in Chinese Journal of Physics (CJP)

Journal ref: Chinese Journal of Physics, 91, 157(2024)

FeynKrack: A continuum model for quasi-brittle damage through Feynman-Kac killed diffusion

Authors: Ved Prakash, Upadhyayula M. M. A. Sai Gopal, Sanhita Das, Ananth Ramaswamy, Debasish Roy

Abstract: Continuum damage mechanics (CDM) is a popular framework for modelling crack propagation in solids. The CDM uses a damage parameter to quantitatively assess what one loosely calls `material degradation'. While this parameter is sometimes given a physical meaning, the mathematical equations for its evolution are generally not consistent with such physical interpretations. Curiously, degradation in t… ▽ More Continuum damage mechanics (CDM) is a popular framework for modelling crack propagation in solids. The CDM uses a damage parameter to quantitatively assess what one loosely calls `material degradation'. While this parameter is sometimes given a physical meaning, the mathematical equations for its evolution are generally not consistent with such physical interpretations. Curiously, degradation in the CDM may be viewed as a change of measures, wherein the damage variable appears as the Radon-Nikodym derivative. We adopt this point of view and use a probabilistic measure-valued description for the random microcracks underlying quasi-brittle damage. We show that the evolution of the underlying density may be described via killed diffusion as in the Feynman-Kac theory. Damage growth is then interpreted as the reduction in this measure over a region, which in turn quantifies the disruption of bonds through a loss of force-transmitting mechanisms between nearby material points. Remarkably, the evolution of damage admits an approximate closed-form solution. This brings forth substantive computational ease, facilitating fast yet accurate simulations of large dimensional problems. By selecting an appropriate killing rate, one accounts for the irreversibility of damage and thus eliminates the need for ad-hoc history-dependent routes typically employed, say, in phase field modelling of damage. Our proposal FeynKrack (a short form for Feynman-Kac crack propagator) is validated and demonstrated for its efficacy through several simulations on quasi-brittle damage. It also offers a promising stochastic route for future explorations of non-equilibrium thermodynamic aspects of damage. △ Less

Submitted 9 July, 2025; v1 submitted 1 December, 2024; originally announced December 2024.

Comments: 26 pages, 16 figures

A comprehensive study of the Spin-Hall effect of tightly focused linearly polarized light through a stratified medium in optical tweezers

Authors: Sramana Das, Sauvik Roy, Subhasish Dutta Gupta, Nirmalya Ghosh, Ayan Banerjee

Abstract: The optical Spin-Hall effect originates from the interaction between the spin angular momentum (SAM) and extrinsic orbital angular momentum (OAM) of light, leading to mutual interrelations between the polarization and trajectory of light in case of non-paraxial fields. Here, we extensively study the SHE and the resultant Spin-Hall shifts (SHS) in optical tweezers (OT) by varying the numerical aper… ▽ More The optical Spin-Hall effect originates from the interaction between the spin angular momentum (SAM) and extrinsic orbital angular momentum (OAM) of light, leading to mutual interrelations between the polarization and trajectory of light in case of non-paraxial fields. Here, we extensively study the SHE and the resultant Spin-Hall shifts (SHS) in optical tweezers (OT) by varying the numerical aperture of objective lenses, and the refractive index (RI) stratification of the trapping medium. Indeed, we obtain much larger values of the SHS for particular combinations of NA and stratification compared to the sub-wavelength orders typically reported. We also observe that the longitudinal component of the spin angular momentum (SAM) density - which is responsible for the spin of birefringent particles in optical tweezers - changes more-or-less monotonically with the lens numerical aperture, except around values of the latter where the angle subtended by the focused light equals the critical angle for a particular RI interface. Our results may find applications in designing experiments for tuning the SHS and SAM induced due to SOI to generate exotic optomechanics of trapped particles in optical tweezers. △ Less

Submitted 21 November, 2024; originally announced November 2024.

Comments: 10 pages, 7 figures

An experimental and numerical study on the behavior of finite-length column vortex

Authors: Swetarka Das, Dharmendra Yadav, Abhisek Kumar Gupta, Debopam Das, Ashoke De

Abstract: This paper explores experimental and numerical investigation of the spatio-temporal dynamics of a finite-length vortex column in three dimensions using Particle Image Velocimetry (PIV) and Large Eddy Simulation (LES). The research examines the combined impact of bending, buckling, and core-splitting on a finite-length vortex column. More precisely, the work centers on the fundamental motions, evol… ▽ More This paper explores experimental and numerical investigation of the spatio-temporal dynamics of a finite-length vortex column in three dimensions using Particle Image Velocimetry (PIV) and Large Eddy Simulation (LES). The research examines the combined impact of bending, buckling, and core-splitting on a finite-length vortex column. More precisely, the work centers on the fundamental motions, evolutions in flow along the axis, how the shape of the vortex core changes over time, the instability caused by the long waves on the vortex column, and the division of the vortex core. A novel prototype is developed that utilizes piston-driven inflow and produces a vortex column through the principles of flow separation and Biot-Savart induction, which is studied for predicting an ex-situ cyclonic line vortex. The present study discusses the complete three-dimensional overview of the same columnar vortex. The meridional swirl and the axial transport of vorticity deform the shape of the core cross-sections in different lengths of the column. The jump in the axial velocity at the core boundary allows for the occurrence of bending instabilities with a left-handed helical structure. These instabilities have a long wavelength, similar to the length of the vortex column, and belong to the m=+1 mode. The vortex column experiences a non-uniform curvature and torsion caused by the intricate shape of the laboratory model and varying flow speeds at different heights of the vortex column. The results offer valuable insights into the role of inertia, Coriolis, and viscous forces on the dynamics of the vortex column. △ Less

Submitted 9 November, 2024; originally announced November 2024.

Journal ref: Physics of Fluids, 2024

Liquid Metal Oxide-assisted Integration of High-k Dielectrics and Metal Contacts for Two-Dimensional Electronics

Authors: Dasari Venkatakrishnarao, Abhishek Mishra, Yaoju Tarn, Michel Bosman, Rainer Lee, Sarthak Das, Subhrajit Mukherjee, Teymour Talha-Dean, Yiyu Zhang, Siew Lang Teo, Jian Wei Chai, Fabio Bussolotti, Kuan Eng Johnson Goh, Chit Siong Lau

Abstract: Two-dimensional van der Waals semiconductors are promising for future nanoelectronics. However, integrating high-k gate dielectrics for device applications is challenging as the inert van der Waals material surfaces hinder uniform dielectric growth. Here, we report a liquid metal oxide-assisted approach to integrate ultrathin, high-k HfO2 dielectric on 2D semiconductors with atomically smooth inte… ▽ More Two-dimensional van der Waals semiconductors are promising for future nanoelectronics. However, integrating high-k gate dielectrics for device applications is challenging as the inert van der Waals material surfaces hinder uniform dielectric growth. Here, we report a liquid metal oxide-assisted approach to integrate ultrathin, high-k HfO2 dielectric on 2D semiconductors with atomically smooth interfaces. Using this approach, we fabricated 2D WS2 top-gated transistors with subthreshold swings down to 74.5 mV/dec, gate leakage current density below 10-6 A/cm2, and negligible hysteresis. We further demonstrate a one-step van der Waals integration of contacts and dielectrics on graphene. This can offer a scalable approach toward integrating entire prefabricated device stack arrays with 2D materials. Our work provides a scalable solution to address the crucial dielectric engineering challenge for 2D semiconductors, paving the way for high-performance 2D electronics. △ Less

Submitted 19 September, 2024; originally announced September 2024.

Journal ref: ACS Nano, 2024

Toward Phonon-Limited Transport in Two-Dimensional Electronics by Oxygen-Free Fabrication

Authors: Subhrajit Mukherjee, Shuhua Wang, Dasari Venkatakrishnarao, Yaoju Tarn, Teymour Talha-Dean, Rainer Lee, Ivan A. Verzhbitskiy, Ding Huang, Abhishek Mishra, John Wellington John, Sarthak Das, Fabio Bussoloti, Thathsara D. Maddumapatabandi, Yee Wen Teh, Yee Sin Ang, Kuan Eng Johnson Goh, Chit Siong Lau

Abstract: Future electronics require aggressive scaling of channel material thickness while maintaining device performance. Two-dimensional (2D) semiconductors are promising candidates, but despite over two decades of research, experimental performance still lags theoretical expectations. Here, we develop an oxygen-free approach to push the electrical transport of 2D field-effect transistors toward the theo… ▽ More Future electronics require aggressive scaling of channel material thickness while maintaining device performance. Two-dimensional (2D) semiconductors are promising candidates, but despite over two decades of research, experimental performance still lags theoretical expectations. Here, we develop an oxygen-free approach to push the electrical transport of 2D field-effect transistors toward the theoretical phonon-limited intrinsic mobility. We achieve record carrier mobilities of 91 (132) cm2V-1s-1 for mono- (bi-) layer MoS2 transistors on SiO2 substrate. Statistics from over 60 devices confirm that oxygen-free fabrication enhances key figures of merit by more than an order of magnitude. While previous studies suggest that 2D transition metal dichalcogenides such as MoS2 and WS2 are stable in air, we show that short-term ambient exposure can degrade their device performance through irreversible oxygen chemisorption. This study emphasizes the criticality of avoiding oxygen exposure, offering guidance for device manufacturing for fundamental research and practical applications of 2D materials. △ Less

Submitted 12 September, 2024; originally announced September 2024.

Correlating grain boundary character and composition in 3-dimensions using 4D-scanning precession electron diffraction and atom probe tomography

Authors: Saurabh M. Das, Patrick Harrison, Srikakulapu Kiranbabu, Xuyang Zhou, Wolfgang Ludwig, Edgar F. Rauch, Michael Herbig, Christian H. Liebscher

Abstract: Grain boundaries are dominant imperfections in nanocrystalline materials that form a complex 3-dimensional (3D) network. Solute segregation to grain boundaries is strongly coupled to the grain boundary character, which governs the stability and macroscopic properties of nanostructured materials. Here, we develop a 3-dimensional transmission electron microscopy and atom probe tomography correlation… ▽ More Grain boundaries are dominant imperfections in nanocrystalline materials that form a complex 3-dimensional (3D) network. Solute segregation to grain boundaries is strongly coupled to the grain boundary character, which governs the stability and macroscopic properties of nanostructured materials. Here, we develop a 3-dimensional transmission electron microscopy and atom probe tomography correlation framework to retrieve the grain boundary character and composition at the highest spatial resolution and chemical sensitivity by correlating four-dimensional scanning precession electron diffraction tomography (4D-SPED) and atom probe tomography (APT) on the same sample. We obtain the 3D grain boundary habit plane network and explore the preferential segregation of Cu and Si in a nanocrystalline Ni-W alloy. The correlation of structural and compositional information reveals that Cu segregates predominantly along high angle grain boundaries and incoherent twin boundaries, whereas Si segregation to low angle and incommensurate grain boundaries is observed. The novel full 3D correlative approach employed in this work opens up new possibilities to explore the 3D crystallographic and compositional nature of nanomaterials. This lays the foundation for both probing the true 3D structure-chemistry at the sub-nanometer scale and, consequentially, tailoring the macroscopic properties of advanced nanomaterials. △ Less

Submitted 3 September, 2024; originally announced September 2024.

Inertial Particle Dynamics in Traveling Wave Flow

Authors: P. Swaathi, Sanjit Das, N. Nirmal Thyagu

Abstract: The dynamics of inertial particles in fluid flows have been the focus of extensive research due to their relevance in a wide range of industrial and environmental processes. Earlier studies have examined the dynamics of aerosols and bubbles using the Maxey-Riley equation in some standard systems but their dynamics within the traveling wave flow remain unexplored. In this paper, we study the Lagran… ▽ More The dynamics of inertial particles in fluid flows have been the focus of extensive research due to their relevance in a wide range of industrial and environmental processes. Earlier studies have examined the dynamics of aerosols and bubbles using the Maxey-Riley equation in some standard systems but their dynamics within the traveling wave flow remain unexplored. In this paper, we study the Lagrangian dynamics of inertial particles in the traveling wave flow which shows mixing, and segregation in phase space as well as the formation of Lagrangian Coherent Structures (LCS). We first obtain the finite-time Lyapunov exponent (FTLEs) for the base fluid flow defined by the traveling wave flow using the Cauchy-Green deformation tensor. Further, we extend our calculations to the inertial particles to get the inertial finite-time Lyapunov exponent (iFTLEs). Our findings reveal that heavier inertial particles tend to be attracted to the ridges of the FTLE fields, while lighter particles are repelled. By understanding how material elements in a flow separate and stretch, one can predict pollutant dispersion, optimize the mixing process, and improve navigation and tracking in fluid environments. This provides insights into the complex and non-intuitive behavior of inertial particles in chaotic fluid flows, and may have implications for pollutant transport in wide-ranging fields such as atmospheric and oceanic sciences. △ Less

Submitted 31 August, 2024; originally announced September 2024.

Comments: 12 pages, 13 figures

MSC Class: 76-XX

(Un)physical consequences of "Quantum Measurements of Time"

Authors: Will Cavendish, Siddhant Das, Markus Nöth, Ali Ayatollah Rafsanjani

Abstract: We note that the empirical predictions of the "Quantum Clock Proposal" [L. Maccone and K. Sacha, Phys. Rev. Lett. 124, 110402 (2020)] are paradoxical when viewed as a solution to the quantum arrival-time problem. We note that the empirical predictions of the "Quantum Clock Proposal" [L. Maccone and K. Sacha, Phys. Rev. Lett. 124, 110402 (2020)] are paradoxical when viewed as a solution to the quantum arrival-time problem. △ Less

Submitted 30 August, 2024; originally announced September 2024.

Comments: 2 pages, 2 figures; comment on arXiv:1810.12869

Performance study of a bakelite RPC prototype built by new technique of linseed oil coating

Authors: A. Sen, S. Mandal, S. Chatterjee, S. Gope, S. Das, S. Biswas

Abstract: Resistive Plate Chamber (RPC) is one of the most commonly used detectors in high energy physics experiments for triggering and tracking because of its good efficiency ($\textgreater$~90\%) and time resolution ($\sim$~1-2~ns). Generally, bakelite which is one of the most commonly used materials as electrode plates in RPC, sometimes suffers from surface roughness issues. If the surface is not smooth… ▽ More Resistive Plate Chamber (RPC) is one of the most commonly used detectors in high energy physics experiments for triggering and tracking because of its good efficiency ($\textgreater$~90\%) and time resolution ($\sim$~1-2~ns). Generally, bakelite which is one of the most commonly used materials as electrode plates in RPC, sometimes suffers from surface roughness issues. If the surface is not smooth, the probability of micro discharges and spurious pulses increase, which leads to the deterioration in the performance of the detector. We have developed a new method of linseed oil coating for the bakelite based detectors to avoid the surface roughness issue. The detector is characterised with Tetrafluoroethane (R134a) based gas mixture. The detector is also tested with a high rate of gamma radiation environment in the laboratory for the radiation hardness test. The detailed measurement procedure and test results are presented in this article. △ Less

Submitted 20 March, 2025; v1 submitted 14 August, 2024; originally announced August 2024.

Comments: 16 pages, 14 figures; Accepted in JINST on 28 February 2025

Integrating Evolutionary Biology into Physics Classroom: Scaling, Dimension, Form and Function

Authors: Kausik S Das, Larry Gonick, Salem Al Mosleh

Abstract: Since Galileo and (more recently) D'Arcy Thompson, it has been understood that physical processes and constraints influence biological structures and their resulting functions. However these cross-discpline connections -- and their importance to growing scientific discplines such as biophysics -- are rarely tought in introductory physics courses. Here we examine how the laws of physics shape Darwi… ▽ More Since Galileo and (more recently) D'Arcy Thompson, it has been understood that physical processes and constraints influence biological structures and their resulting functions. However these cross-discpline connections -- and their importance to growing scientific discplines such as biophysics -- are rarely tought in introductory physics courses. Here we examine how the laws of physics shape Darwinism evolution through the surface area to volume ratio, an important geometric measure of a structure. We develop conceptual cartoon clicker questions to enhance students' understanding of these interdisciplinary concepts. By connecting abstract physical laws with biological (and technological) applications, our approach aims to help students appreciate the deep connections between physical and biological sciences, thereby enriching the learning experience in introductory physics courses. △ Less

Submitted 7 August, 2024; originally announced August 2024.

Comments: 31 page, 17 figures

Group Theory in Physics: An Introduction with Mathematica

Authors: Balasubramanian Ananthanarayan, Souradeep Das, Amitabha Lahiri, Suhas Sheikh, Sarthak Talukdar

Abstract: Group Theory has become an invaluable tool in the physics community. Despite numerous introductory books, the subject remains challenging for beginners. Mathematica has emerged as a popular tool for research and education, offering various packages and built-in tools for Group Theory. However, these resources are often too scattered for effective educational use. This work aims to provide a compre… ▽ More Group Theory has become an invaluable tool in the physics community. Despite numerous introductory books, the subject remains challenging for beginners. Mathematica has emerged as a popular tool for research and education, offering various packages and built-in tools for Group Theory. However, these resources are often too scattered for effective educational use. This work aims to provide a comprehensive source to help beginning students grasp Group Theory concepts and their applications from a physicist's perspective, while also building familiarity with symbolic language. We present several example notebooks that succinctly cover well-known theories and demonstrate specific concepts, which can be easily adapted for educational purposes. We provide basic examples on finite, compact and non-compact groups, and motivate the use of these concepts in solving physics problems such as addition of angular momenta, modelling a system of qubits and the description of spacetime transformations. △ Less

Submitted 20 July, 2024; originally announced August 2024.

Comments: 110 pages

Journal ref: Eur. Phys. J. Spec. Top. (2024)

Fast and scalable finite-element based approach for density functional theory calculations using projector-augmented wave method

Authors: Kartick Ramakrishnan, Sambit Das, Phani Motamarri

Abstract: In this work, we present a computationally efficient methodology that utilizes a local real-space formulation of the projector augmented wave (PAW) method discretized with a finite-element (FE) basis to enable accurate and large-scale electronic structure calculations. To the best of our knowledge, this is the first real-space approach for DFT calculations, combining the efficiency of PAW formalis… ▽ More In this work, we present a computationally efficient methodology that utilizes a local real-space formulation of the projector augmented wave (PAW) method discretized with a finite-element (FE) basis to enable accurate and large-scale electronic structure calculations. To the best of our knowledge, this is the first real-space approach for DFT calculations, combining the efficiency of PAW formalism involving smooth electronic fields with the ability of systematically improvable higher-order finite-element basis to achieve significant computational gains. In particular, we have developed efficient strategies for solving the underlying FE discretized PAW generalized eigenproblem by employing the Chebyshev filtered subspace iteration approach to compute the desired eigenspace in each self-consistent field iteration. These strategies leverage the low-rank perturbation of the FE basis overlap matrix in conjunction with reduced order quadrature rules to invert the discretized PAW overlap matrix while also exploiting the sparsity of both the local and non-local parts of the discretized PAW Hamiltonian and overlap matrices. Using the proposed approach, we benchmark the accuracy and performance on various representative examples involving periodic and non-periodic systems with plane-wave-based PAW implementations. Furthermore, we also demonstrate a considerable computational advantage ($\sim$ 5$\times$ -- 10$\times$) over state-of-the-art plane-wave methods for medium to large-scale systems ($\sim$ 6,000 -- 35,000 electrons). Finally, we show that our approach (PAW-FE) significantly reduces the degrees of freedom to achieve the desired accuracy, thereby enabling large-scale DFT simulations ($>$ 50,000 electrons) at an order of magnitude lower computational cost compared to norm-conserving pseudopotential calculations using finite-element discretized calculations. △ Less

Submitted 31 December, 2024; v1 submitted 1 August, 2024; originally announced August 2024.

Comments: 30 pages, 4 figures, 9 tables, 3 algorithms

Air-blood interface engineered microfluidic device to mimic shear rate gradient induced human bleeding model

Authors: Shobhit Das, Shilpi Pandey, Oliver Hayden

Abstract: Microfluidic technology has emerged as a powerful tool for studying complex biological processes with enhanced precision and control. A microfluidic chip was designed to emulate human-like microvascular networks with precise control over channel geometry and flow conditions. By simulating blood flow dynamics during bleeding events, we successfully observed the real-time interactions of platelets a… ▽ More Microfluidic technology has emerged as a powerful tool for studying complex biological processes with enhanced precision and control. A microfluidic chip was designed to emulate human-like microvascular networks with precise control over channel geometry and flow conditions. By simulating blood flow dynamics during bleeding events, we successfully observed the real-time interactions of platelets and their aggregation induced by shear rate gradient at the wound site. Platelet dynamics is primarily influenced by physico-mechanical condition of blood vessels with pathophysiological condition of blood at close proximity of vascular injury site. This microfluidic platform facilitated the investigation of platelet adhesion, activation, and clot formation, providing a unique opportunity to study the spatiotemporal dynamics of platelet aggregation and blood clot. Our findings shed light on the intricate mechanisms underlying thrombus formation and platelet-mediated aggregation, offering a more accurate and dynamic representation of human haemostasis compared to traditional animal models. In the conventional approach, the human bleeding model is tried on mouse due to anatomy and pathological similarities between mouse and humans. This study will simplify and standardize the blood and vasculature conditions. The microfluidic-based replication of the bleeding model holds significant promise in advancing our understanding of clotting disorders and wound healing processes. Furthermore, it paves the way for targeted therapeutic interventions in managing bleeding disorders and enhancing clinical strategies for promoting efficient wound closure. Ultimately, this study demonstrates the potential of microfluidics to revolutionize haemostasis research and opens up new avenues for the development of personalized medicine approaches in the field of clotting disorders. △ Less

Submitted 31 July, 2024; originally announced July 2024.

Comments: arXiv admin comment: This version has been removed by arXiv administrators as the submitter did not have the rights to agree to the license at the time of submission

Light Dark Matter Constraints from SuperCDMS HVeV Detectors Operated Underground with an Anticoincidence Event Selection

Authors: SuperCDMS Collaboration, M. F. Albakry, I. Alkhatib, D. Alonso-González, D. W. P. Amaral, J. Anczarski, T. Aralis, T. Aramaki, I. J. Arnquist, I. Ataee Langroudy, E. Azadbakht, C. Bathurst, R. Bhattacharyya, A. J. Biffl, P. L. Brink, M. Buchanan, R. Bunker, B. Cabrera, R. Calkins, R. A. Cameron, C. Cartaro, D. G. Cerdeño, Y. -Y. Chang, M. Chaudhuri, J. -H. Chen , et al. (117 additional authors not shown)

Abstract: This article presents constraints on dark-matter-electron interactions obtained from the first underground data-taking campaign with multiple SuperCDMS HVeV detectors operated in the same housing. An exposure of 7.63 g-days is used to set upper limits on the dark-matter-electron scattering cross section for dark matter masses between 0.5 and 1000 MeV/$c^2$, as well as upper limits on dark photon k… ▽ More This article presents constraints on dark-matter-electron interactions obtained from the first underground data-taking campaign with multiple SuperCDMS HVeV detectors operated in the same housing. An exposure of 7.63 g-days is used to set upper limits on the dark-matter-electron scattering cross section for dark matter masses between 0.5 and 1000 MeV/$c^2$, as well as upper limits on dark photon kinetic mixing and axion-like particle axioelectric coupling for masses between 1.2 and 23.3 eV/$c^2$. Compared to an earlier HVeV search, sensitivity was improved as a result of an increased overburden of 225 meters of water equivalent, an anticoincidence event selection, and better pile-up rejection. In the case of dark-matter-electron scattering via a heavy mediator, an improvement by up to a factor of 25 in cross-section sensitivity was achieved. △ Less

Submitted 5 September, 2024; v1 submitted 10 July, 2024; originally announced July 2024.

Comments: 7 pages + title and references, 4 figures, and 1 table

Journal ref: Phys. Rev. D, 111 012006 (2025)

Influence of Pseudo-Jahn-Teller Activity on the Singlet-Triplet Gap of Azaphenalenes

Authors: Atreyee Majumdar, Komal Jindal, Surajit Das, Raghunathan Ramakrishnan

Abstract: We analyze the possibility of symmetry-lowering induced by pseudo-Jahn--Teller interactions in six previously studied azaphenalenes that are known to have their first excited singlet state (S$_1$) lower in energy than the triplet state (T$_1$). The primary aim of this study is to explore whether Hund's rule violation is observed in these molecules when their structures are distorted from… ▽ More We analyze the possibility of symmetry-lowering induced by pseudo-Jahn--Teller interactions in six previously studied azaphenalenes that are known to have their first excited singlet state (S$_1$) lower in energy than the triplet state (T$_1$). The primary aim of this study is to explore whether Hund's rule violation is observed in these molecules when their structures are distorted from $C_{\rm 2v}$ or $D_{\rm 3h}$ point group symmetries by vibronic coupling. Along two interatomic distances connecting these point groups to their subgroups $C_{\rm s}$ or $C_{\rm 3h}$, we relaxed the other internal degrees of freedom and calculated two-dimensional potential energy subsurfaces. The many-body perturbation theory (MP2) suggests that the high-symmetry structures are the energy minima for all six systems. However, single-point energy calculations using the coupled-cluster method (CCSD(T)) indicate symmetry lowering in four cases. The singlet-triplet energy gap plotted on the potential energy surface also shows variations when deviating from high-symmetry structures. A full geometry optimization at the CCSD(T) level with the cc-pVTZ basis set reveals that the $D_{\rm 3h}$ structure of cyclazine (1AP) is a saddle point, connecting two equivalent minima of $C_{\rm 3h}$ symmetry undergoing rapid automerization. The combined effects of symmetry lowering and high-level corrections result in a nearly zero singlet-triplet gap for the $C_{\rm 3h}$ structure of cyclazine. Azaphenalenes containing nitrogen atoms at electron-deficient sites -- 2AP, 3AP, and 4AP -- exhibit more pronounced in-plane structural distortion; the effect is captured by the long-range exchange-interaction corrected DFT method, $ω$B97XD. Excited state calculations of these systems indicate that in their low-symmetry energy minima, T$_1$ is indeed lower in energy than S$_1$, upholding the validity of Hund's rule. △ Less

Submitted 5 October, 2024; v1 submitted 5 July, 2024; originally announced July 2024.

Comments: second version

A Compounded Burr Probability Distribution for Fitting Heavy-Tailed Data with Applications to Biological Networks

Authors: Tanujit Chakraborty, Swarup Chattopadhyay, Suchismita Das, Shraddha M. Naik, Chittaranjan Hens

Abstract: Complex biological networks, encompassing metabolic pathways, gene regulatory systems, and protein-protein interaction networks, often exhibit scale-free structures characterized by heavy-tailed degree distributions. However, empirical studies reveal significant deviations from ideal power law behavior, underscoring the need for more flexible and accurate probabilistic models. In this work, we pro… ▽ More Complex biological networks, encompassing metabolic pathways, gene regulatory systems, and protein-protein interaction networks, often exhibit scale-free structures characterized by heavy-tailed degree distributions. However, empirical studies reveal significant deviations from ideal power law behavior, underscoring the need for more flexible and accurate probabilistic models. In this work, we propose the Compounded Burr (CBurr) distribution, a novel four parameter family derived by compounding the Burr distribution with a discrete mixing process. This model is specifically designed to capture both the body and tail behavior of real-world network degree distributions with applications to biological networks. We rigorously derive its statistical properties, including moments, hazard and risk functions, and tail behavior, and develop an efficient maximum likelihood estimation framework. The CBurr model demonstrates broad applicability to networks with complex connectivity patterns, particularly in biological, social, and technological domains. Extensive experiments on large-scale biological network datasets show that CBurr consistently outperforms classical power-law, log-normal, and other heavy-tailed models across the full degree spectrum. By providing a statistically grounded and interpretable framework, the CBurr model enhances our ability to characterize the structural heterogeneity of biological networks. △ Less

Submitted 26 April, 2025; v1 submitted 5 July, 2024; originally announced July 2024.