Characterizing and visualizing the direct injection of hydrogen into high-pressure argon and nitrogen environments
Authors:
Max Peters,
Noud Maes,
Nico Dam,
Jeroen van Oijen
Abstract:
Using argon as the working fluid in an internal combustion engine holds the potential of substantially enhancing thermal efficiency because of its high specific heat ratio. Burning hydrogen, not with air but with pure oxygen, in a closed-loop argon power cycle would lead to an emission-free exhaust composition, effectively containing only water and argon, which can be separated by condensation. On…
▽ More
Using argon as the working fluid in an internal combustion engine holds the potential of substantially enhancing thermal efficiency because of its high specific heat ratio. Burning hydrogen, not with air but with pure oxygen, in a closed-loop argon power cycle would lead to an emission-free exhaust composition, effectively containing only water and argon, which can be separated by condensation. One of the current challenges is the high-pressure direct injection of both fuel and oxidizer, which directly controls the combustion process. To support the development of such an injection strategy, high-pressure injections of hydrogen in pressurized argon and nitrogen are investigated using high-speed Schlieren and pressure transducers in a non-heated constant-volume chamber at varying conditions. We show that hydrogen mass flow is well described by choked flow theory, while jet penetration and angle are determined by the pressure ratio between the fuel line and the ambient. A correlation is presented between jet penetration and pressure ratio for argon or nitrogen ambient at room temperature.
△ Less
Submitted 17 January, 2024;
originally announced January 2024.
Characteristics of a novel nanosecond DBD microplasma reactor for flow applications
Authors:
A. Elkholy,
E. van Veldhuizen,
S. Nijdam,
U. Ebert,
J. van Oijen,
N. Dam,
L. Philip H. de Goey
Abstract:
We present a novel microplasma flow reactor using a dielectric barrier discharge (DBD) driven by repetitively nanosecond high-voltage pulses. Our DBD-based geometry can generate a non-thermal plasma discharge at atmospheric pressure and below in a regular pattern of micro-channels. This reactor can work continuously up to about 100 minutes in air, depending on pulse repetition rate and operating p…
▽ More
We present a novel microplasma flow reactor using a dielectric barrier discharge (DBD) driven by repetitively nanosecond high-voltage pulses. Our DBD-based geometry can generate a non-thermal plasma discharge at atmospheric pressure and below in a regular pattern of micro-channels. This reactor can work continuously up to about 100 minutes in air, depending on pulse repetition rate and operating pressure. We here present the geometry and the main characteristics of the reactor. Pulse energies of 1.9 $μ$J and 2.7 $μ$J per channel at atmospheric pressure and 50 mbar, respectively, have been determined by time-resolved measurements of current and voltage. Time-resolved optical emission spectroscopy measurements have been performed to calculate the relative species concentrations and temperatures (vibrational and rotational) of the discharge. Effects of the operating pressure and the flow velocity on the discharge intensity have been investigated. In addition, the effective reduced electric field strength E/N has been obtained from the intensity ratio of vibronic emission bands of molecular nitrogen at different operating pressures. The derived effective E/N increases gradually from 500 Td to 600 Td when decreasing the pressure from one bar to 0.4 bar. Below 0.4 bar, further pressure reduction results in a significant increase in the effective E/N up to about 2000 Td at 50 mbar.
△ Less
Submitted 8 September, 2017;
originally announced September 2017.
