-
Diversity of ghost notes in tubas, euphoniums and saxhorns
Authors:
Rémi Mattéoli,
Joël Gilbert,
Soizic Terrien,
Jean-Pierre Dalmont,
Christophe Vergez,
Sylvain Maugeais,
Emmanuel Brasseur
Abstract:
The ghost note is a natural note which can be played exclusively on bass brass instruments with a predominantly-expanding bore profile such as tubas, euphoniums or saxhorns. It stands between the pedal note-the lowest natural note playable, or first regime-and the instrument's second regime. However, if the interval between the pedal note and the second regime remains close to an octave regardless…
▽ More
The ghost note is a natural note which can be played exclusively on bass brass instruments with a predominantly-expanding bore profile such as tubas, euphoniums or saxhorns. It stands between the pedal note-the lowest natural note playable, or first regime-and the instrument's second regime. However, if the interval between the pedal note and the second regime remains close to an octave regardless of the instrument, the interval between the pedal note and the ghost note vary from a minor third to a perfect fourth. References about this note are very scarce, and it is not commonly known among tuba players.This study shows that an elementary brass model describing the player coupled to the instrument is capable of bringing both the ghost and the pedal note to light. Here, we adopt a dynamical systems point of view and perform a bifurcation analysis using a software of numerical continuation. The numerical results provided in terms of frequency intervals between pedal note and ghost note are compared with frequency intervals experimentally inferred from recordings of seven different types of tuba, each of them being played by two professional tuba players.
△ Less
Submitted 22 July, 2022; v1 submitted 12 July, 2022;
originally announced July 2022.
-
Minimal blowing pressure allowing periodic oscillations in a model of bass brass instruments
Authors:
Rémi Mattéoli,
Joël Gilbert,
Christophe Vergez,
Jean-Pierre Dalmont,
Sylvain Maugeais,
Soizic Terrien,
Frédéric Ablitzer
Abstract:
In this study, an acoustic resonator -- a bass brass instrument -- with multiple resonances coupled to an exciter -- the player's lips -- with one resonance is modelled by a multidimensional dynamical system, and studied using a continuation and bifurcation software. Bifurcation diagrams are explored with respect to the blowing pressure, in particular with focus on the minimal blowing pressure all…
▽ More
In this study, an acoustic resonator -- a bass brass instrument -- with multiple resonances coupled to an exciter -- the player's lips -- with one resonance is modelled by a multidimensional dynamical system, and studied using a continuation and bifurcation software. Bifurcation diagrams are explored with respect to the blowing pressure, in particular with focus on the minimal blowing pressure allowing stable periodic oscillations and the associated frequency.The behaviour of the instrument is first studied close to a (non oscillating) equilibrium using linear stability analysis. This allows to determine the conditions at which an equilibrium destabilises and as such where oscillating regimes can emerge (corresponding to a sound production). This approach is useful to characterise the ease of playing of a brass instrument, which is assumed here to be related -- as a first approximation -- to the linear threshold pressure. In particular, the lower the threshold pressure, the lower the physical effort the player has to make to play a note [Campbell et al., 2021].Cases are highlighted where periodic solutions in the bifurcation diagrams are reached for blowing pressures below the value given by the linear stability analysis. Thus, bifurcation diagrams allow a more in-depth analysis. Particular attention is devoted to the first playing regime of bass brass instruments (the pedal note and the ghost note of a tuba in particular), whose behaviour qualitatively differs from a trombone to a euphonium for instance.
△ Less
Submitted 16 February, 2022; v1 submitted 16 December, 2021;
originally announced December 2021.
-
Statistical Estimation of Mechanical Parameters of Clarinet Reeds Using Experimental and Numerical Approaches
Authors:
Pierre-André Taillard,
Franck Laloë,
Michel Gross,
Jean-Pierre Dalmont,
Jean Kergomard
Abstract:
A set of 55 clarinet reeds is observed by holography, collecting 2 series of measurements made under 2 different moisture contents, from which the resonance frequencies of the 15 first modes are deduced. A statistical analysis of the results reveals good correlations, but also significant differences between both series. Within a given series, flexural modes are not strongly correlated. A Principa…
▽ More
A set of 55 clarinet reeds is observed by holography, collecting 2 series of measurements made under 2 different moisture contents, from which the resonance frequencies of the 15 first modes are deduced. A statistical analysis of the results reveals good correlations, but also significant differences between both series. Within a given series, flexural modes are not strongly correlated. A Principal Component Analysis (PCA) shows that the measurements of each series can be described with 3 factors capturing more than $90\%$ of the variance: the first is linked with transverse modes, the second with flexural modes of high order and the third with the first flexural mode. A forth factor is necessary to take into account the individual sensitivity to moisture content. Numerical 3D simulations are conducted by Finite Element Method, based on a given reed shape and an orthotropic model. A sensitivity analysis revels that, besides the density, the theoretical frequencies depend mainly on 2 parameters: $E_L$ and $G_{LT}$. An approximate analytical formula is proposed to calculate the resonance frequencies as a function of these 2 parameters. The discrepancy between the observed frequencies and those calculated with the analytical formula suggests that the elastic moduli of the measured reeds are frequency dependent. A viscoelastic model is then developed, whose parameters are computed as a linear combination from 4 orthogonal components, using a standard least squares fitting procedure and leading to an objective characterization of the material properties of the cane \textit{Arundo donax}.
△ Less
Submitted 6 May, 2014; v1 submitted 9 February, 2012;
originally announced February 2012.
-
Synthèse sonore de la clarinette avec modèle de résonateur à trous latéraux optimisé sur des impédances d'entrée d'une clarinette réelle
Authors:
Fabrice Silva,
Philippe Guillemain,
Jean Kergomard,
Jean-Pierre Dalmont
Abstract:
Sound synthesis can be developed using physics-based modelling of the musical instruments. These methods need the description of the various parts of sound production mechanism, in particular a model of the acoustic resonator that have to be simple enough due to the real-time constraint. However, in the case of the clarinet, the bore is quite not a cylindrical tube. An implementation of a resona…
▽ More
Sound synthesis can be developed using physics-based modelling of the musical instruments. These methods need the description of the various parts of sound production mechanism, in particular a model of the acoustic resonator that have to be simple enough due to the real-time constraint. However, in the case of the clarinet, the bore is quite not a cylindrical tube. An implementation of a resonator including a open-tone holes lattice is presented in this paper.
△ Less
Submitted 10 January, 2009;
originally announced January 2009.
