Showing 1–50 of 71 results for author: Dai, Y

Ground Calibration Result of the Wide-field X-ray Telescope (WXT) onboard the Einstein Probe

Authors: Huaqing Cheng, Chen Zhang, Zhixing Ling, Xiaojin Sun, Shengli Sun, Yuan Liu, Yanfeng Dai, Zhenqing Jia, Haiwu Pan, Wenxin Wang, Donghua Zhao, Yifan Chen, Zhiwei Cheng, Wei Fu, Yixiao Han, Junfei Li, Zhengda Li, Xiaohao Ma, Yulong Xue, Ailiang Yan, Qiang Zhang, Yusa Wang, Xiongtao Yang, Zijian Zhao, Longhui Li , et al. (2 additional authors not shown)

Abstract: We report on results of the on-ground X-ray calibration of the Wide-field X-ray Telescope (WXT) built from novel lobster-eye micro-pore optics, onboard the Einstein Probe (EP) satellite. To fully characterize the instrumental performance and properties, a series of tests and calibrations have been carried out at different levels of devices, assemblies and the complete module before the launch of E… ▽ More We report on results of the on-ground X-ray calibration of the Wide-field X-ray Telescope (WXT) built from novel lobster-eye micro-pore optics, onboard the Einstein Probe (EP) satellite. To fully characterize the instrumental performance and properties, a series of tests and calibrations have been carried out at different levels of devices, assemblies and the complete module before the launch of EP. In this paper, we present the calibration results of three flight model modules (FM1, FM5 and FM11) obtained during their end-to-end module calibration experiments carried out at the 100-m X-ray Test Facility (100XF) of IHEP, CAS. Measurements of the Point Spread Function (PSF), effective area, and energy response were performed for multiple incident directions and several characteristic X-ray emission line energies. Specifically, the distributions of the PSF and effective areas are found to be roughly uniform across the FoV, in large agreement with the prediction of lobster-eye optics. Their energy dependence behavior aligns well with theoretical predictions and Monte Carlo simulations. At 1.25 keV, the full width at half maximum (FWHM) of the focal spot is in range of 3-7 arcmin (a median of 4.2) and the effective area in range of 2-3 $cm^2$. Noticeably, the flight model instruments demonstrate a $\sim1.5$ arcmin spatial resolution improvement over the previously launched Lobster Eye Imager for Astronomy. The properties of the complementary metal-oxide semiconductor (CMOS) sensors were also calibrated. The gain coefficients are in range of 6.4-6.9 eV/DN. The energy resolutions are in range of 120-140 eV at 1.25 keV, meeting design requirements. These calibration results have been ingested into the first version of calibration database (CALDB) and applied to the analysis of the scientific data acquired by WXT after the launch of EP. △ Less

Submitted 24 May, 2025; originally announced May 2025.

Comments: 28 pages, 18 figures, 2 tables. submitted to Experimental Astronomy

Multipole nuclear shielding factors of hydrogen atom confined by a spherical cavity

Authors: Yu Qing Dai, Zhi Ling Zhou, Henry E. Montgomery, Jr., Yew Kam Ho, Aihua Liu, Li Guang Jiao

Abstract: Nuclear shielding factor is an important quantity to describe the response of an atom under the perturbation of an external field. In this work, we develop the sum-over-states numerical method and the Hylleraas variational perturbation approximation to calculate the multipole nuclear shielding factors for general one-electron systems and apply them to the model of the hydrogen atom confined by a s… ▽ More Nuclear shielding factor is an important quantity to describe the response of an atom under the perturbation of an external field. In this work, we develop the sum-over-states numerical method and the Hylleraas variational perturbation approximation to calculate the multipole nuclear shielding factors for general one-electron systems and apply them to the model of the hydrogen atom confined by a spherical cavity. The generalized pseudospectral method is employed to solve the eigenstates of the unperturbed atom. The obtained dipole nuclear shielding factors are in good agreement with previous calculations and the higher-pole results are reported for the first time. The asymptotic behaviors of the multipole nuclear shielding factors in both the large- and small-confinement limits are analyzed with the assistance of variational perturbation theory. The free-atom values can be exactly reproduced by the second-order perturbation approximation and all multipole nuclear shielding factors in the small-confinement limit tend to zero by a linear law. The variational perturbation method manifests exponential convergence with increasing the order of approximation. The numerical and approximate methods developed in this work together pave the way for further investigation of the multipole nuclear shielding factors for general atomic systems. △ Less

Submitted 24 April, 2025; originally announced April 2025.

A dual-scale stochastic analysis framework for creep failure considering microstructural randomness

Authors: Weichen Kong, Yanwei Dai, Xiang Zhang, Yinghua Liu

Abstract: Creep failure under high temperatures is a complex multiscale and multi-mechanism issue involving inherent microstructural randomness. To investigate the effect of microstructures on the uniaxial/multiaxial creep failure, a dual-scale stochastic analysis framework is established to introduce the grain boundary (GB) characteristics into the macroscopic analysis. The nickel-base superalloy Inconel 6… ▽ More Creep failure under high temperatures is a complex multiscale and multi-mechanism issue involving inherent microstructural randomness. To investigate the effect of microstructures on the uniaxial/multiaxial creep failure, a dual-scale stochastic analysis framework is established to introduce the grain boundary (GB) characteristics into the macroscopic analysis. The nickel-base superalloy Inconel 617 is considered in this study. Firstly, the damage mechanisms of GBs are investigated based on the crystal plasticity finite element (CPFE) method and cohesive zone model (CZM). Subsequently, based on the obtained GB damage evolution, a novel Monte Carlo (MC) approach is proposed to establish the relationship between the GB orientation and area distribution and macroscopic creep damage. Finally, a dual-scale stochastic multiaxial creep damage model is established to incorporate the influence of the random GB orientation and area distribution. With the numerical application of the proposed creep damage model, the random initiation and growth of creep cracks in the uniaxial tensile specimen and the pressurized tube are captured and analyzed. The proposed stochastic framework effectively considers the inherent randomness introduced by GB characteristics and efficiently realizes full-field multiscale calculations. It also shows its potential applications in safety evaluation and life prediction of creep components and structures under high temperatures. △ Less

Submitted 1 April, 2025; originally announced April 2025.

A Fully Reconfigurable All-Optical Integrated Nonlinear Activator

Authors: Bei Chen, Xiaowen Xiong, Renheng Zhang, Yitang Dai, Jianyi Yang, Jinhua Bai, Wei Li, Ninghua Zhu, Ming Li

Abstract: Photonic neural networks have been considered as the promising candidates for next-generation neuromorphic computation, aiming to break both the power consumption wall and processing speed boundary of state-to-date digital computing architectures. Optics has shown its advantages in parallelism and linear manipulation. However, the lack of low-power and high-speed all-optical nonlinear activation n… ▽ More Photonic neural networks have been considered as the promising candidates for next-generation neuromorphic computation, aiming to break both the power consumption wall and processing speed boundary of state-to-date digital computing architectures. Optics has shown its advantages in parallelism and linear manipulation. However, the lack of low-power and high-speed all-optical nonlinear activation neurons limits its revolution in large-scale photonic neural networks. Here we demonstrate an all-optical nonlinear activator (AONA) based on Fano-enhanced nonlinear optical effects in intra-cavity field, in which our device enables reconfigurability both in shape and type of the nonlinear functions (NFs) relying on the tuning biases on Fano interference and cavity buildup. Experimental results show that our AONA enables nonlinear optical computing with low-power continuous-wave light of 0.1 mW threshold, which can also support the overall processing speed of 13 GHz. The performances of the generated reconfigurable NFs are verified in the classification of handwritten digits and image recognition tasks, yielding the converged cost and enhanced accuracy compared to the linear-only networks. Our proposed device would pave the way for energy-efficient and accelerated all-optical intelligent processors with versatile functionalities and large-scale integration. △ Less

Submitted 14 March, 2025; originally announced March 2025.

Fusion of Various Optimization Based Feature Smoothing Methods for Wearable and Non-invasive Blood Glucose Estimation

Authors: Yiting Wei, Bingo Wing-Kuen Ling, Danni Chen, Yuheng Dai, Qing Liu

Abstract: Recently, the wearable and non-invasive blood glucose estimation approach has been proposed. However, due to the unreliability of the acquisition device, the presence of the noise and the variations of the acquisition environments, the obtained features and the reference blood glucose values are highly unreliable. To address this issue, this paper proposes a polynomial fitting approach to smooth t… ▽ More Recently, the wearable and non-invasive blood glucose estimation approach has been proposed. However, due to the unreliability of the acquisition device, the presence of the noise and the variations of the acquisition environments, the obtained features and the reference blood glucose values are highly unreliable. To address this issue, this paper proposes a polynomial fitting approach to smooth the obtained features or the reference blood glucose values. First, the blood glucose values are estimated based on the individual optimization approaches. Second, the absolute difference values between the estimated blood glucose values and the actual blood glucose values based on each optimization approach are computed. Third, these absolute difference values for each optimization approach are sorted in the ascending order. Fourth, for each sorted blood glucose value, the optimization method corresponding to the minimum absolute difference value is selected. Fifth, the accumulate probability of each selected optimization method is computed. If the accumulate probability of any selected optimization method at a point is greater than a threshold value, then the accumulate probabilities of these three selected optimization methods at that point are reset to zero. A range of the sorted blood glucose values are defined as that with the corresponding boundaries points being the previous reset point and this reset point. Hence, after performing the above procedures for all the sorted reference blood glucose values in the validation set, the regions of the sorted reference blood glucose values and the corresponding optimization methods in these regions are determined. The computer numerical simulation results show that our proposed method yields the mean absolute relative deviation (MARD) at 0.0930 and the percentage of the test data falling in the zone A of the Clarke error grid at 94.1176%. △ Less

Submitted 6 March, 2025; originally announced March 2025.

Comments: This version corrects several typos

Journal ref: IET Systems Biology, 2023, 17(3): 107-120

Symmetrical bipolar electrobending deformation in acceptor-doped piezoceramics

Authors: Yi Cheng, Shuo Tian, Bin Li, Yejing Dai

Abstract: Since 2022, large apparent strains (>1%) with highly asymmetrical strain-electric field (S-E) curves have been reported in various thin piezoceramic materials, attributed to a bidirectional electric-field-induced bending (electrobending) deformation, which consistently produces convex bending along the negative electric field direction. In this study, we report a novel unidirectional electrobendin… ▽ More Since 2022, large apparent strains (>1%) with highly asymmetrical strain-electric field (S-E) curves have been reported in various thin piezoceramic materials, attributed to a bidirectional electric-field-induced bending (electrobending) deformation, which consistently produces convex bending along the negative electric field direction. In this study, we report a novel unidirectional electrobending behavior in acceptor-doped K0.5Na0.5NbO3 ceramics, where convex bending always occurs along the pre-poling direction regardless of the direction of the applied electric field. This unique deformation is related to the reorientation of the defect dipoles in one surface layer during the pre-poling process, resulting in an asymmetrical distribution of defect dipoles in the two surface layers. The synergistic interaction between ferroelectric domains and defect dipoles in the surface layers induces this unidirectional electrobending, as evidenced by a butterfly-like symmetrical bipolar S-E curve with a giant apparent strain of 3.2%. These findings provide new insights into defect engineering strategies for developing advanced piezoelectric materials with large electroinduced displacements. △ Less

Submitted 4 March, 2025; originally announced March 2025.

MSC Class: 14J60 (Primary) 14F05; 14J26 (Secondary) 14J60 (Primary) 14F05; 14J26 (Secondary)

A wideband amplifying and filtering reconfigurable intelligent surface for wireless relay

Authors: Lijie Wu, Qun Yan Zhou, Jun Yan Dai, Siran Wang, Junwei Zhang, Zhen Jie Qi, Hanqing Yang, Ruizhe Jiang, Zheng Xing Wang, Huidong Li, Zhen Zhang, Jiang Luo, Qiang Cheng, Tie Jun Cui

Abstract: Programmable metasurfaces have garnered significant attention due to their exceptional ability to manipulate electromagnetic (EM) waves in real time, leading to the emergence of a prominent area in wireless communication, namely reconfigurable intelligent surfaces (RISs), to control the signal propagation and coverage. However, the existing RISs usually suffer from limited operating distance and b… ▽ More Programmable metasurfaces have garnered significant attention due to their exceptional ability to manipulate electromagnetic (EM) waves in real time, leading to the emergence of a prominent area in wireless communication, namely reconfigurable intelligent surfaces (RISs), to control the signal propagation and coverage. However, the existing RISs usually suffer from limited operating distance and band interference, which hinder their practical applications in wireless relay and communication systems. To overcome the limitations, we propose an amplifying and filtering RIS (AF-RIS) to enhance the in-band signal energy and filter the out-of-band signal of the incident EM waves, ensuring the miniaturization of the RIS array and enabling its anti-interference ability. In addition, each AF-RIS element is equipped with a 2-bit phase control capability, further endowing the entire array with great beamforming performance. An elaborately designed 4*8 AF-RIS array is presented by integrating the power dividing and combining networks, which substantially reduces the number of amplifiers and filters, thereby reducing the hardware costs and power consumption. Experimental results showcase the powerful capabilities of AF-RIS in beam-steering, frequency selectivity, and signal amplification. Therefore, the proposed AF-RIS holds significant promise for critical applications in wireless relay systems by offering an efficient solution to improve frequency selectivity, enhance signal coverage, and reduce hardware size. △ Less

Submitted 31 December, 2024; originally announced January 2025.

Harnessing the Power of Vibration Motors to Develop Miniature Untethered Robotic Fishes

Authors: Chongjie Jiang, Yingying Dai, Jinyang Le, Xiaomeng Chen, Yu Xie, Wei Zhou, Fuzhou Niu, Ying Li, Tao Luo

Abstract: Miniature underwater robots play a crucial role in the exploration and development of marine resources, particularly in confined spaces and high-pressure deep-sea environments. This study presents the design, optimization, and performance of a miniature robotic fish, powered by the oscillation of bio-inspired fins. These fins feature a rigid-flexible hybrid structure and use an eccentric rotating… ▽ More Miniature underwater robots play a crucial role in the exploration and development of marine resources, particularly in confined spaces and high-pressure deep-sea environments. This study presents the design, optimization, and performance of a miniature robotic fish, powered by the oscillation of bio-inspired fins. These fins feature a rigid-flexible hybrid structure and use an eccentric rotating mass (ERM) vibration motor as the excitation source to generate high-frequency unidirectional oscillations that induce acoustic streaming for propulsion. The drive mechanism, powered by miniature ERM vibration motors, eliminates the need for complex mechanical drive systems, enabling complete isolation of the entire drive system from the external environment and facilitating the miniaturization of the robotic fish. A compact, untethered robotic fish, measuring 85*60*45 mm^3, is equipped with three bio-inspired fins located at the pectoral and caudal positions. Experimental results demonstrate that the robotic fish achieves a maximum forward swimming speed of 1.36 body lengths (BL) per second powered by all fins and minimum turning radius of 0.6 BL when powered by a single fin. These results underscore the significance of employing the ERM vibration motor in advancing the development of highly maneuverable, miniature untethered underwater robots for various marine exploration tasks. △ Less

Submitted 9 January, 2025; originally announced January 2025.

Comments: 8 pages, 8 figures

A feature-preserving parallel particle generation method for complex geometries

Authors: Xingyue Yang, Zhenxiang Nie, Yuxin Dai, Zhe Ji

Abstract: In this paper, a Feature-preserving Particle Generation (FPPG) method for arbitrary complex geometry is proposed. Instead of basing on implicit geometries, such as level-set, FPPG employs an explicit geometric representation for the parallel and automatic generation of high-quality surface and volume particles, which enables the full preservation of geometric features, such as sharp edges, singula… ▽ More In this paper, a Feature-preserving Particle Generation (FPPG) method for arbitrary complex geometry is proposed. Instead of basing on implicit geometries, such as level-set, FPPG employs an explicit geometric representation for the parallel and automatic generation of high-quality surface and volume particles, which enables the full preservation of geometric features, such as sharp edges, singularities and etc. Several new algorithms are proposed in this paper to achieve the aforementioned objectives. First, a particle mapping and feature line extraction algorithm is proposed to ensure the adequate representation of arbitrary complex geometry. An improved and efficient data structure is developed too to maximize the parallel efficiency and to optimize the memory footprint. Second, the physics-based particle relaxation procedure is tailored for the explicit geometric representation to achieve a uniform particle distribution. Third, in order to handle large-scale industrial models, the proposed FPPG method is entirely parallelized on shared memory systems and Boolean operations are allowed to tackle structures with multiple assemblies. Intensive numerical tests are carried out to demonstrate the capabilities of FPPG. The scalability tests show that a speedup of ~10X is achieved through multi-threading parallelization with various models. Comparative studies with other particle generation methods show that FPPG achieves better performance in both runtime and accuracy. Last, two industrial cases of vehicle wading and gearbox oiling are studied to illustrate that FPPG is applicable to complex geometries. △ Less

Submitted 6 January, 2025; originally announced January 2025.

Ultra-narrow linewidth light generation based on an optoelectronic oscillator

Authors: Qizhuang Cen, Shanhong Guan, Dongdong Jiao, Tengfei Hao, X. Steve Yao, Yitang Dai, Ming Li

Abstract: Narrow-linewidth light sources are essential for both fundamental research and various technological applications, yet they are challenging to generate directly due to instabilities in active laser cavities and the misalignment between closely spaced resonator modes and broad gain bandwidth. In this study, we demonstrate the direct generation of low-noise light from an optoelectronic oscillator (O… ▽ More Narrow-linewidth light sources are essential for both fundamental research and various technological applications, yet they are challenging to generate directly due to instabilities in active laser cavities and the misalignment between closely spaced resonator modes and broad gain bandwidth. In this study, we demonstrate the direct generation of low-noise light from an optoelectronic oscillator (OEO). By minimizing the delay in the optoelectronic link and employing a high-quality optical resonator, an OEO can simultaneously generate both a low-phase-noise optical oscillation that is resilient to phase fluctuations of its pump laser, and a radio frequency (RF) oscillation that captures these fluctuations. We leverage these RF-domain fluctuations to implement a high-performance feedback loop, which stabilizes the pump laser and significantly enhances the performance of optical oscillation. This approach achieves an outstanding phase noise level of -100 dBc/Hz at a 1 kHz offset and an integrated linewidth as narrow as 0.23 Hz. The integration of optoelectronic oscillation and feedback loop provides significant broadband noise suppression compared to conventional schemes for generating narrow-linewidth light, paving the way for developments in fields such as coherent optical communications, atomic spectroscopy, metrology, and quantum optics. △ Less

Submitted 10 February, 2025; v1 submitted 3 December, 2024; originally announced December 2024.

Intelligent Adaptive Metasurface in Complex Wireless Environments

Authors: Han Qing Yang, Jun Yan Dai, Hui Dong Li, Lijie Wu, Meng Zhen Zhang, Zi Hang Shen, Si Ran Wang, Zheng Xing Wang, Wankai Tang, Shi Jin, Jun Wei Wu, Qiang Cheng, Tie Jun Cui

Abstract: The programmable metasurface is regarded as one of the most promising transformative technologies for next-generation wireless system applications. Due to the lack of effective perception ability of the external electromagnetic environment, there are numerous challenges in the intelligent regulation of wireless channels, and it still relies on external sensors to reshape electromagnetic environmen… ▽ More The programmable metasurface is regarded as one of the most promising transformative technologies for next-generation wireless system applications. Due to the lack of effective perception ability of the external electromagnetic environment, there are numerous challenges in the intelligent regulation of wireless channels, and it still relies on external sensors to reshape electromagnetic environment as desired. To address that problem, we propose an adaptive metasurface (AMS) which integrates the capabilities of acquiring wireless environment information and manipulating reflected electromagnetic (EM) waves in a programmable manner. The proposed design endows the metasurfaces with excellent capabilities to sense the complex electromagnetic field distributions around them and then dynamically manipulate the waves and signals in real time under the guidance of the sensed information, eliminating the need for prior knowledge or external inputs about the wireless environment. For verification, a prototype of the proposed AMS is constructed, and its dual capabilities of sensing and manipulation are experimentally validated. Additionally, different integrated sensing and communication (ISAC) scenarios with and without the aid of the AMS are established. The effectiveness of the AMS in enhancing communication quality is well demonstrated in complex electromagnetic environments, highlighting its beneficial application potential in future wireless systems. △ Less

Submitted 13 November, 2024; originally announced November 2024.

Gate-Controllable Quadri-Layertronics in 2D Multiferroic Antiferromagnet

Authors: Ting Zhang, Mingsheng Wang, Xilong Xu, Ying Dai, Yandong Ma

Abstract: Layertronics that manifests layer Hall effect is typically considered to intrinsically possess binary physics. Using symmetry arguments and a low-energy kp model, we show that the layer physics in layertronics can be engineered into quaternary mode, giving rise to the concept of quadri-layertronics. The mechanism correlates to the interplay between out-of-plane ferroelectricity and valley physics… ▽ More Layertronics that manifests layer Hall effect is typically considered to intrinsically possess binary physics. Using symmetry arguments and a low-energy kp model, we show that the layer physics in layertronics can be engineered into quaternary mode, giving rise to the concept of quadri-layertronics. The mechanism correlates to the interplay between out-of-plane ferroelectricity and valley physics in antiferromagnetic multiferroic quadrilayer, which enables the layer-locked Berry curvature and Hall effect, i.e., deflecting the carriers with four different layer physics to move in specific directions. More importantly, the quadri-layertronics can be generated and manipulated by controlling the interlayer dipole arrangements via a gate voltage, allowing for the selective induction and detection of layer Hall effect in specific layers. Using first principles calculations, we further demonstrate the gate control of quadri-layertronics in multiferroic antiferromagnet of quadrilayer OsCl2. These explored phenomena and insights greatly enrich the research on layertronics. △ Less

Submitted 11 November, 2024; originally announced November 2024.

Multiple-partition cross-modulation programmable metasurface empowering wireless communications

Authors: Jun Wei Zhang, Zhen Jie Qi, Li Jie Wu, Wan Wan Cao, Xinxin Gao, Zhi Hui Fu, Jing Yu Chen, Jie Ming Lv, Zheng Xing Wang, Si Ran Wang, Jun Wei Wu, Zhen Zhang, Jia Nan Zhang, Hui Dong Li, Jun Yan Dai, Qiang Cheng, Tie Jun Cui

Abstract: With the versatile manipulation capability, programmable metasurfaces are rapidly advancing in their intelligence, integration, and commercialization levels. However, as the programmable metasurfaces scale up, their control configuration becomes increasingly complicated, posing significant challenges and limitations. Here, we propose a multiple-partition cross-modulation (MPCM) programmable metasu… ▽ More With the versatile manipulation capability, programmable metasurfaces are rapidly advancing in their intelligence, integration, and commercialization levels. However, as the programmable metasurfaces scale up, their control configuration becomes increasingly complicated, posing significant challenges and limitations. Here, we propose a multiple-partition cross-modulation (MPCM) programmable metasurface to enhance the wireless communication coverage with low hardware complexity. We firstly propose an innovative encoding scheme to multiply the control voltage vectors of row-column crossing, achieving high beamforming precision in free space while maintaining low control hardware complexity and reducing memory requirements for coding sequences. We then design and fabricate an MPCM programmable metasurface to confirm the effectiveness of the proposed encoding scheme. The simulated and experimental results show good agreements with the theoretically calculated outcomes in beam scanning across the E and H planes and in free-space beam pointing. The MPCM programmable metasurface offers strong flexibility and low complexity by allowing various numbers and combinations of partition items in modulation methods, catering to diverse precision demands in various scenarios. We demonstrate the performance of MPCM programmable metasurface in a realistic indoor setting, where the transmissions of videos to specific receiver positions are successfully achieved, surpassing the capabilities of traditional programmable metasurfaces. We believe that the proposed programmable metasurface has great potentials in significantly empowering the wireless communications while addressing the challenges associated with the programmable metasurface's design and implementation. △ Less

Submitted 8 November, 2024; originally announced November 2024.

Simplified radar architecture based on information metasurface

Authors: Si Ran Wang, Zhan Ye Chen, Shao Nan Chen, Jun Yan Dai, Jun Wei Zhang, Zhen Jie Qi, Li Jie Wu, Meng Ke Sun, Qun Yan Zhou, Hui Dong Li, Zhang Jie Luo, Qiang Cheng, Tie Jun Cui

Abstract: Modern radar typically employs a chain architecture that consists of radio-frequency (RF) and intermediate frequency (IF) units, baseband digital signal processor, and information display. However, this architecture often results in high costs, significant hardware demands, and integration challenges. Here we propose a simplified radar architecture based on space-time-coding (STC) information meta… ▽ More Modern radar typically employs a chain architecture that consists of radio-frequency (RF) and intermediate frequency (IF) units, baseband digital signal processor, and information display. However, this architecture often results in high costs, significant hardware demands, and integration challenges. Here we propose a simplified radar architecture based on space-time-coding (STC) information metasurfaces. With their powerful capabilities to generate multiple harmonic frequencies and customize their phases, the STC metasurfaces play a key role in chirp signal generation, transmission, and echo reception. Remarkably, the receiving STC metasurface can implement dechirp processing directly on the RF level and realize the digital information outputs, which are beneficial to lower the hardware requirement at the receiving end while potentially shortening the time needed for conventional digital processing. As a proof of concept, the proposed metasurface radar is tested in a series of experiments for target detection and range/speed measurement, yielding results comparable to those obtained by conventional methods. This study provides valuable inspiration for a new radar system paradigm to combine the RF front ends and signal processors on the information metasurface platform that offers essential functionalities while significantly reducing the system complexity and cost. △ Less

Submitted 9 October, 2024; originally announced October 2024.

Comments: 25 pages, 10 figures

A Low-Frequency Vibration Experimental Platform for University Physics Experiment Designed by LabVIEW

Authors: Yangjie Dai, Leijian Wang, Wenbin Wu, Aiping Chen, Dawei Gu

Abstract: Virtual instrument technology has been increasingly used in university physics experiment teaching. An experimental platform is specifically constructed for studying low-frequency vibrations in university physics, which is based on a computer and its internal sound card, along with a program developed in LabVIEW programming environment to perform control and measurement on our experimental platfor… ▽ More Virtual instrument technology has been increasingly used in university physics experiment teaching. An experimental platform is specifically constructed for studying low-frequency vibrations in university physics, which is based on a computer and its internal sound card, along with a program developed in LabVIEW programming environment to perform control and measurement on our experimental platform. The proposed platform effectively replaces the conventional signal generator and oscilloscope traditionally used in such experiments by integrating virtual instruments and essential experimental equipment. The platform offers various functionalities, such as synchronous transmission and reception of low-frequency signals, frequency measurement, dynamic frequency sweep measurement, and measurement using the three-point approximation method. The proposed platform has been successfully applied in experiments involving forced vibration, resonance of tuning forks, and dynamic measurement of Young's modulus. Unlike conventional low-frequency vibration experiments, the proposed experimental platform optimizes efficiency, reduces costs, and offers opportunities for enhancing the instructional content of experiments. Furthermore, the incorporation of state-of-the-art computer technology enhances students' engagement and enthusiasm for learning. △ Less

Submitted 27 July, 2024; originally announced July 2024.

Comments: 13 pages, 8 figures, 2 supplementary files

A Broadband Algorithm for Adiabatic Mode Evolution and its Application on Polarization Splitter-Rotator on LNOI Platform

Authors: Geng Chen, Chijun Li, Xuanhao Wang, An Pan, Junjie Wei, Yuankang Huang, Siyu Lu, Yiqi Dai, Xiangyu Meng, Cheng Zeng, Jinsong Xia

Abstract: Adiabatic mode evolution waveguides (AMEWs) are widely utilized in integrated photonics, including tapered waveguides, edge couplers, mode converters, splitters, etc. An analytical theory and a novel AMEW design algorithm are developed to create shortcuts to adiabaticity (STA). This new algorithm is effective in shortening the total length of the AMEW while maintaining the desired wavelength range… ▽ More Adiabatic mode evolution waveguides (AMEWs) are widely utilized in integrated photonics, including tapered waveguides, edge couplers, mode converters, splitters, etc. An analytical theory and a novel AMEW design algorithm are developed to create shortcuts to adiabaticity (STA). This new algorithm is effective in shortening the total length of the AMEW while maintaining the desired wavelength range. Moreover, this analytical algorithm requires much fewer computing resources than traditional numerical algorithms. With the new algorithm, we demonstrate a broadband and highly efficient polarization splitter-rotator (PSR) on a lithium-niobate-on-insulator (LNOI) platform with an LN thickness of 500 nm. According to our simulation, the length of the PSR is shortened by 3.5 times compared to the linear design. The fabricated PSR, with a total length of 2 mm, exhibits an insertion loss (IL) of 0.8 dB and a polarization extinction ratio (ER) of 12.2 dB over a wavelength range exceeding 76 nm. △ Less

Submitted 22 July, 2024; v1 submitted 6 July, 2024; originally announced July 2024.

Comments: 16 pages, 6 figures, 2 tables

Molecule-induced surface second-order nonlinearity in an inversion symmetric microcavity

Authors: Ru Wang, Yue Dai, Jinsong Cheng, Ruoyu Wang, Xiaoqin Shen

Abstract: Inversion symmetry eliminates the second-order nonlinear responses in materials commonly used in silicon photonics with electric-dipole approximation. The lack of effective methods to induce the second-order nonlinearity in silicon photonic materials prevents their applications in second-order nonlinear integrated photonics. Here, we experimentally demonstrate a surface second-order nonlinear opti… ▽ More Inversion symmetry eliminates the second-order nonlinear responses in materials commonly used in silicon photonics with electric-dipole approximation. The lack of effective methods to induce the second-order nonlinearity in silicon photonic materials prevents their applications in second-order nonlinear integrated photonics. Here, we experimentally demonstrate a surface second-order nonlinear optics approach for boosting the second harmonic (SH) generation process in a silica microcavity. By leveraging the molecule-induced surface second-order nonlinearity, a record high SH efficiency of about 6.7% W-1 is achieved in a silica microcavity functionalized with a surface asymmetrically-aligned molecular monolayer, which is enhanced of two to four orders of magnitude compared to that before molecule-functionalization. Furthermore, we derive the equations that govern the surface second-order nonlinear process in inversion symmetric microcavities. Our method not only enables high efficiency second-order nonlinear frequency conversions in silica photonics, but also can apply to other inversion symmetric material platforms for integrated photonics. △ Less

Submitted 21 May, 2024; originally announced May 2024.

Comments: 22

Interferences effects in polarized nonlinear Breit-Wheeler process

Authors: Jing-Jing Jiang, Ya-Nan Dai, Kai-Hong Zhuang, Yunquan Gao, Suo Tang, Yue-Yue Chen

Abstract: The creation of polarized electron-positron pairs by the nonlinear Breit-Wheeler process in short laser pulses is investigated using the Baier-Katkov semiclassical method beyond local-constant-field approximation (LCFA), which allows for identifying the interferences effects in the positron polarization. When the laser intensity is in the intermediate %multiphoton regime, the interferences of pair… ▽ More The creation of polarized electron-positron pairs by the nonlinear Breit-Wheeler process in short laser pulses is investigated using the Baier-Katkov semiclassical method beyond local-constant-field approximation (LCFA), which allows for identifying the interferences effects in the positron polarization. When the laser intensity is in the intermediate %multiphoton regime, the interferences of pair production in different formation lengths induce an enhancement of pair production probability for spin-down positrons, which significantly affects the polarization of created positrons. The polarization features are distinct from that obtained with LCFA, revealing the invalidity of LCFA in this regime. Meanwhile, the angular distribution for different spin states varies, resulting in an angular-dependent polarization of positrons. The average polarization of positrons at beam center is highly sensitive to the laser's carrier-envelope phase (CEP), which provides a potential alternative way of determining the CEP of strong lasers. The verification of the observed interference phenomenon is possible for the upcoming experiments. △ Less

Submitted 24 January, 2024; originally announced January 2024.

Fermionic signal of vacuum polarization in strong laser fields

Authors: Ya-Nan Dai, Karen Z. Hatsagortsyan, Christoph H. Keitel, Yue-Yue Chen

Abstract: Vacuum polarization (VP) is investigated for the interaction of a polarized $γ$-ray beam of GeV photons with a counterpropagating ultraintense laser pulse. In a conventional setup of a vacuum birefringence measurement, a VP signal is the emerging small circular (linear) polarization of the initially linearly (circularly) polarized probe photons. The pair production via the nonlinear Breit-Wheeler… ▽ More Vacuum polarization (VP) is investigated for the interaction of a polarized $γ$-ray beam of GeV photons with a counterpropagating ultraintense laser pulse. In a conventional setup of a vacuum birefringence measurement, a VP signal is the emerging small circular (linear) polarization of the initially linearly (circularly) polarized probe photons. The pair production via the nonlinear Breit-Wheeler process in such a high-energy environment eliminates part of the $γ$-photons in the outgoing $γ$-beam, increasing the statistical error and decreasing the accuracy of this VP signal. In contrast, we investigate the conversion of the emerging circular polarization of $γ$-photons into longitudinal polarization of the created positrons, considering the latter as the main VP signal. To study the VP effects in the highly nonlinear regime, where the Euler-Heisenberg effective Lagrangian method breaks down, we have developed a Monte-Carlo simulation method, incorporating vacuum birefringence and dichroism via the one-loop QED probabilities in the locally constant field approximation. Our Monte Carlo method will enable the study of VP effects in strong fields of arbitrary configuration. With 10~PW laser systems, we demonstrate the feasibility of detecting the fermionic signal of the VP effect at the 5$σ$ confidence level with a few hours of measurement time. △ Less

Submitted 2 June, 2024; v1 submitted 20 January, 2024; originally announced January 2024.

Enhanced α particle generation via proton-boron fusion reactions in laser-modulated plasma

Authors: Yihang Zhang, Zhe Zhang, Yufeng Dong, Ke Fang, Haochen Gu, Yu Dai, Wei Qi, Zhigang Deng, Xiaohui Zhang, Lei Yang, Feng Lu, Zheng Huang, Kainan Zhou, Yuchi Wu, Weimin Zhou, Feng Liu, Guoqiang Zhang, Bingjun Li, Xu Zhao, Xiaohui Yuan, Chen Wang, Yutong Li

Abstract: Aneutronic and nonradioactive properties make the proton-boron fusion a prospective candidate for fusion energy production through reactions following p+$^{11}$B$\rightarrow$3$α$ (p-$^{11}$B). However, it is difficult to achieve a thermal fusion ignition, since the low reaction cross-sections for center-of-mass energy below $\sim$100 keV. To realize fusion energy gain, it is essential to consider… ▽ More Aneutronic and nonradioactive properties make the proton-boron fusion a prospective candidate for fusion energy production through reactions following p+$^{11}$B$\rightarrow$3$α$ (p-$^{11}$B). However, it is difficult to achieve a thermal fusion ignition, since the low reaction cross-sections for center-of-mass energy below $\sim$100 keV. To realize fusion energy gain, it is essential to consider utilization of the maximum cross-section at the resonant peak of p-$^{11}$B fusion, and explore the nuclear reactions in plasma environment. In this work, p-$^{11}$B reactions triggered by interactions between energetic proton beams and laser-ablated boron plasma have been investigated. More than 200 times enhancement of $α$ particle emission efficiency (number ratio of escaping $α$ particles and boron nuclei) in plasma has been observed, compared with the cold boron. The proton beam transport path modulated by strong electro-magnetic fields in plasma could dominate the enhanced $α$ particle generation, due to a longer collisional length. In addition, an $α$ particle yield up to 1$\times$10$^{10}$ /sr has been measured via the pitcher-catcher scheme in plasma. This work could benefit understanding of the plasma effects on nuclear reaction dynamics, and also enable opportunities to explore physics in laser fusion associated with advanced fusion fuels. △ Less

Submitted 14 January, 2024; originally announced January 2024.

Statistical Machine Learning Meets High-Dimensional Spatiotemporal Challenges -- A Case Study of COVID-19 Modeling

Authors: Binbin Lin, Yimin Dai, Lei Zou, Ning Ning

Abstract: Diverse non-pharmacological interventions (NPIs), serving as the primary approach for COVID-19 control prior to pharmaceutical interventions, showed heterogeneous spatiotemporal effects on pandemic management. Investigating the dynamic compounding impacts of NPIs on pandemic spread is imperative. However, the challenges posed by data availability of high-dimensional human behaviors and the complex… ▽ More Diverse non-pharmacological interventions (NPIs), serving as the primary approach for COVID-19 control prior to pharmaceutical interventions, showed heterogeneous spatiotemporal effects on pandemic management. Investigating the dynamic compounding impacts of NPIs on pandemic spread is imperative. However, the challenges posed by data availability of high-dimensional human behaviors and the complexity of modeling changing and interrelated factors are substantial. To address these challenges, this study analyzed social media data, COVID-19 case rates, Apple mobility data, and the stringency of stay-at-home policies in the United States throughout the year 2020, aiming to (1) uncover the spatiotemporal variations in NPIs during the COVID-19 pandemic utilizing geospatial big data; (2) develop a statistical machine learning model that incorporates spatiotemporal dependencies and temporal lag effects for the detection of relationships; (3) dissect the impacts of NPIs on the pandemic across space and time. Three indices were computed based on Twitter (currently known as X) data: the Negative and Positive Sentiments Adjusted by Demographics (N-SAD and P-SAD) and the Ratio Adjusted by Demographics (RAD), representing negative sentiment, positive sentiment, and public awareness of COVID-19, respectively. The Multivariate Bayesian Structural Time Series Time Lagged model (MBSTS-TL) was proposed to investigate the effects of NPIs, accounting for spatial dependencies and temporal lag effects. The developed MBSTS-TL model exhibited a high degree of accuracy. Determinants of COVID-19 health impacts transitioned from an emphasis on human mobility during the initial outbreak period to a combination of human mobility and stay-at-home policies during the rapid spread phase, and ultimately to the compound of human mobility, stay-at-home policies, and public awareness of COVID-19. △ Less

Submitted 28 November, 2023; originally announced December 2023.

Ground Calibration Result of the Lobster Eye Imager for Astronomy

Authors: Huaqing Cheng, Zhixing Ling, Chen Zhang, Xiaojin Sun, Shengli Sun, Yuan Liu, Yanfeng Dai, Zhenqing Jia, Haiwu Pan, Wenxin Wang, Donghua Zhao, Yifan Chen, Zhiwei Cheng, Wei Fu, Yixiao Han, Junfei Li, Zhengda Li, Xiaohao Ma, Yulong Xue, Ailiang Yan, Qiang Zhang, Yusa Wang, Xiongtao Yang, Zijian Zhao, Weimin Yuan

Abstract: We report on results of the on-ground X-ray calibration of the Lobster Eye Imager for Astronomy (LEIA), an experimental space wide-field (18.6*18.6 square degrees) X-ray telescope built from novel lobster eye mirco-pore optics. LEIA was successfully launched on July 27, 2022 onboard the SATech-01 satellite. To achieve full characterisation of its performance before launch, a series of tests and ca… ▽ More We report on results of the on-ground X-ray calibration of the Lobster Eye Imager for Astronomy (LEIA), an experimental space wide-field (18.6*18.6 square degrees) X-ray telescope built from novel lobster eye mirco-pore optics. LEIA was successfully launched on July 27, 2022 onboard the SATech-01 satellite. To achieve full characterisation of its performance before launch, a series of tests and calibrations have been carried out at different levels of devices, assemblies and the complete module. In this paper, we present the results of the end-to-end calibration campaign of the complete module carried out at the 100-m X-ray Test Facility at IHEP. The PSF, effective area and energy response of the detectors were measured in a wide range of incident directions at several X-ray line energies. The distributions of the PSF and effective areas are roughly uniform across the FoV, in large agreement with the prediction of lobster-eye optics. The mild variations and deviations from the prediction of idealized lobster-eye optics can be understood to be caused by the imperfect shapes and alignment of the micro-pores as well as the obscuration by the supporting frames, which can be well reproduced by MC simulations. The spatial resolution of LEIA defined by the FWHM of the focal spot ranges from 4-8 arcmin with a median of 5.7. The measured effective areas are in range of 2-3 $cm^2$ at ~1.25 keV across the entire FoV, and its dependence on photon energy is in large agreement with simulations. The gains of the CMOS sensors are in range of 6.5-6.9 eV/DN, and the energy resolutions in the range of ~120-140 eV at 1.25 keV and ~170-190 eV at 4.5 keV. These results have been ingested into the calibration database and applied to the analysis of the scientific data acquired by LEIA. This work paves the way for the calibration of the Wide-field X-Ray Telescope modules of the Einstein Probe mission. △ Less

Submitted 11 December, 2023; originally announced December 2023.

Comments: 24 pages, 13 figures. Submitted to Experimental Astronomy

Large electrobending deformation caused by defect dipoles

Authors: Shuo Tian, Bin Li, Yejing Dai

Abstract: Ultrahigh electrostrains (greater than 1%) in several piezoceramic systems have been reported since 2022, which attract more and more interest in the field of piezoelectricity; however, the mechanism is still unclear. Here, we have directly observed a novel electric field-induced bending (electrobending) phenomenon that visually exhibites as an alternating concave-convex deformation under an elect… ▽ More Ultrahigh electrostrains (greater than 1%) in several piezoceramic systems have been reported since 2022, which attract more and more interest in the field of piezoelectricity; however, the mechanism is still unclear. Here, we have directly observed a novel electric field-induced bending (electrobending) phenomenon that visually exhibites as an alternating concave-convex deformation under an electric field of plus or minus 50 kV cm-1, in nonstoichiometric (K0.48Na0.52)0.99NbO2.995 ceramics, which causes the measured ultrahigh electrostrain. It is demonstrated that the electrobending deformation arises from the different stresses due to the stretching or compression of the defect dipoles on the upper and lower surfaces of the ceramics. As a result of the large electrobending deformation, a giant apparent electrostrain of 11.6% is obtained at room temperature, and it can even reach up to 26.0% at 210 degree Celsius, which far exceeds that of all present piezoelectric materials. Our discovery is an important addition and refinement to the field of condensed matter physics, whilst providing a new strategy and shedding light on the design of future precision actuators or intelligent devices. △ Less

Submitted 5 December, 2023; originally announced December 2023.

MLatom 3: Platform for machine learning-enhanced computational chemistry simulations and workflows

Authors: Pavlo O. Dral, Fuchun Ge, Yi-Fan Hou, Peikun Zheng, Yuxinxin Chen, Mario Barbatti, Olexandr Isayev, Cheng Wang, Bao-Xin Xue, Max Pinheiro Jr, Yuming Su, Yiheng Dai, Yangtao Chen, Lina Zhang, Shuang Zhang, Arif Ullah, Quanhao Zhang, Yanchi Ou

Abstract: Machine learning (ML) is increasingly becoming a common tool in computational chemistry. At the same time, the rapid development of ML methods requires a flexible software framework for designing custom workflows. MLatom 3 is a program package designed to leverage the power of ML to enhance typical computational chemistry simulations and to create complex workflows. This open-source package provid… ▽ More Machine learning (ML) is increasingly becoming a common tool in computational chemistry. At the same time, the rapid development of ML methods requires a flexible software framework for designing custom workflows. MLatom 3 is a program package designed to leverage the power of ML to enhance typical computational chemistry simulations and to create complex workflows. This open-source package provides plenty of choice to the users who can run simulations with the command line options, input files, or with scripts using MLatom as a Python package, both on their computers and on the online XACS cloud computing at XACScloud.com. Computational chemists can calculate energies and thermochemical properties, optimize geometries, run molecular and quantum dynamics, and simulate (ro)vibrational, one-photon UV/vis absorption, and two-photon absorption spectra with ML, quantum mechanical, and combined models. The users can choose from an extensive library of methods containing pre-trained ML models and quantum mechanical approximations such as AIQM1 approaching coupled-cluster accuracy. The developers can build their own models using various ML algorithms. The great flexibility of MLatom is largely due to the extensive use of the interfaces to many state-of-the-art software packages and libraries. △ Less

Submitted 30 October, 2023; originally announced October 2023.

One-Dimensional Crystallographic Etching of Few-Layer WS$_2$

Authors: Shisheng Li, Yung-Chang Lin, Yiling Chiew, Yunyun Dai, Zixuan Ning, Hideaki Nakajima, Hong En Lim, Jing Wu, Yasuhisa Naito, Toshiya Okazaki, Zhipei Sun, Kazu Suenaga, Yoshiki Sakuma, Kazuhito Tsukagoshi, Takaaki Taniguchi

Abstract: Layer number-dependent band structures and symmetry are vital for the electrical and optical characteristics of two-dimensional (2D) transition metal dichalcogenides (TMDCs). Harvesting 2D TMDCs with tunable thickness and properties can be achieved through top-down etching and bottom-up growth strategies. In this study, we report a pioneering technique that utilizes the migration of in-situ genera… ▽ More Layer number-dependent band structures and symmetry are vital for the electrical and optical characteristics of two-dimensional (2D) transition metal dichalcogenides (TMDCs). Harvesting 2D TMDCs with tunable thickness and properties can be achieved through top-down etching and bottom-up growth strategies. In this study, we report a pioneering technique that utilizes the migration of in-situ generated Na-W-S-O droplets to etch out one-dimensional (1D) nanotrenches in few-layer WS$_2$. 1D WS$_2$ nanotrenches were successfully fabricated on the optically inert bilayer WS$_2$, showing pronounced photoluminescence and second harmonic generation signals. Additionally, we demonstrate the modulation of inkjet-printed Na$_2$WO$_4$-Na$_2$SO$_4$ particles to switch between the etching and growth modes by manipulating the sulfur supply. This versatile approach enables the creation of 1D nanochannels on 2D TMDCs. Our research presents exciting prospects for the top-down and bottom-up fabrication of 1D-2D mixed-dimensional TMDC nanostructures, expanding their use for photonic and optoelectronic applications. △ Less

Submitted 4 October, 2023; originally announced October 2023.

Comments: 37 pages, 16 figures

Journal ref: Advanced Functional Materials, 2024

3D front tip fields in creeping solids under constraint effects: a higher-order asymptotic solution

Authors: Weichen Kong, Yanwei Dai, Yinghua Liu

Abstract: As one of the most important topics studied in creep fracture mechanics, mechanics fields at three-dimensional (3D) sharp V-notches and crack tip have drawn tremendous attentions. With many years efforts on constraint theory developed in creeping solids, there still seems dense fog on how in-plane and out-of-plane constraint effects are interacted for 3D sharp V-notch and crack in creeping solids.… ▽ More As one of the most important topics studied in creep fracture mechanics, mechanics fields at three-dimensional (3D) sharp V-notches and crack tip have drawn tremendous attentions. With many years efforts on constraint theory developed in creeping solids, there still seems dense fog on how in-plane and out-of-plane constraint effects are interacted for 3D sharp V-notch and crack in creeping solids. To shed lights on this topic, a 3D higher-order termed solution for sharp V-notches in creeping materials subjected to mode 1 loading is established by introducing the out-of-plane factor, which is the out-of-plane stress divided by the sum of in-plane normal stress. The solution can naturally be degenerated to a 3D crack. Based on the 3D higher-order term solution, a new fracture parameter is proposed and combined with to characterize 3D constraint effect. It is found that the stress exponents and angular distribution of higher-order term for 3D notches and cracks are highly related to . The proposed higher order termed solutions show better agreement with the FEA results than the 3D leading-term and 2D two-term solutions, especially for smaller notch angles and ligament width. Moreover, the presented 3D constraint theory shows that effects of and are highly interlinked rather than simply separated. It implies that the 3D constraint level may be significantly influenced by . The 3D mathematical solutions discussed in this paper could enhance the understanding of the 3D effect and has the potential to explain the 3D constraint effect on the notches and cracks under creep conditions. △ Less

Submitted 5 August, 2023; originally announced August 2023.

Comments: 56 pages, 25 figures

The Lobster Eye Imager for Astronomy Onboard the SATech-01 Satellite

Authors: Z. X. Ling, X. J. Sun, C. Zhang, S. L. Sun, G. Jin, S. N. Zhang, X. F. Zhang, J. B. Chang, F. S. Chen, Y. F. Chen, Z. W. Cheng, W. Fu, Y. X. Han, H. Li, J. F. Li, Y. Li, Z. D. Li, P. R. Liu, Y. H. Lv, X. H. Ma, Y. J. Tang, C. B. Wang, R. J. Xie, Y. L. Xue, A. L. Yan , et al. (101 additional authors not shown)

Abstract: The Lobster Eye Imager for Astronomy (LEIA), a pathfinder of the Wide-field X-ray Telescope of the Einstein Probe (EP) mission, was successfully launched onboard the SATech-01 satellite of the Chinese Academy of Sciences on 27 July 2022. In this paper, we introduce the design and on-ground test results of the LEIA instrument. Using state-of-the-art Micro-Pore Optics (MPO), a wide field-of-view (Fo… ▽ More The Lobster Eye Imager for Astronomy (LEIA), a pathfinder of the Wide-field X-ray Telescope of the Einstein Probe (EP) mission, was successfully launched onboard the SATech-01 satellite of the Chinese Academy of Sciences on 27 July 2022. In this paper, we introduce the design and on-ground test results of the LEIA instrument. Using state-of-the-art Micro-Pore Optics (MPO), a wide field-of-view (FoV) of 346 square degrees (18.6 degrees * 18.6 degrees) of the X-ray imager is realized. An optical assembly composed of 36 MPO chips is used to focus incident X-ray photons, and four large-format complementary metal-oxide semiconductor (CMOS) sensors, each of 6 cm * 6 cm, are used as the focal plane detectors. The instrument has an angular resolution of 4 - 8 arcmin (in FWHM) for the central focal spot of the point spread function, and an effective area of 2 - 3 cm2 at 1 keV in essentially all the directions within the field of view. The detection passband is 0.5 - 4 keV in the soft X-rays and the sensitivity is 2 - 3 * 10-11 erg s-1 cm-2 (about 1 mini-Crab) at 1,000 second observation. The total weight of LEIA is 56 kg and the power is 85 W. The satellite, with a design lifetime of 2 years, operates in a Sun-synchronous orbit of 500 km with an orbital period of 95 minutes. LEIA is paving the way for future missions by verifying in flight the technologies of both novel focusing imaging optics and CMOS sensors for X-ray observation, and by optimizing the working setups of the instrumental parameters. In addition, LEIA is able to carry out scientific observations to find new transients and to monitor known sources in the soft X-ray band, albeit limited useful observing time available. △ Less

Submitted 24 May, 2023; originally announced May 2023.

Comments: Accepted by RAA

STCF Conceptual Design Report: Volume 1 -- Physics & Detector

Authors: M. Achasov, X. C. Ai, R. Aliberti, L. P. An, Q. An, X. Z. Bai, Y. Bai, O. Bakina, A. Barnyakov, V. Blinov, V. Bobrovnikov, D. Bodrov, A. Bogomyagkov, A. Bondar, I. Boyko, Z. H. Bu, F. M. Cai, H. Cai, J. J. Cao, Q. H. Cao, Z. Cao, Q. Chang, K. T. Chao, D. Y. Chen, H. Chen , et al. (413 additional authors not shown)

Abstract: The Super $τ$-Charm facility (STCF) is an electron-positron collider proposed by the Chinese particle physics community. It is designed to operate in a center-of-mass energy range from 2 to 7 GeV with a peak luminosity of $0.5\times 10^{35}{\rm cm}^{-2}{\rm s}^{-1}$ or higher. The STCF will produce a data sample about a factor of 100 larger than that by the present $τ$-Charm factory -- the BEPCII,… ▽ More The Super $τ$-Charm facility (STCF) is an electron-positron collider proposed by the Chinese particle physics community. It is designed to operate in a center-of-mass energy range from 2 to 7 GeV with a peak luminosity of $0.5\times 10^{35}{\rm cm}^{-2}{\rm s}^{-1}$ or higher. The STCF will produce a data sample about a factor of 100 larger than that by the present $τ$-Charm factory -- the BEPCII, providing a unique platform for exploring the asymmetry of matter-antimatter (charge-parity violation), in-depth studies of the internal structure of hadrons and the nature of non-perturbative strong interactions, as well as searching for exotic hadrons and physics beyond the Standard Model. The STCF project in China is under development with an extensive R\&D program. This document presents the physics opportunities at the STCF, describes conceptual designs of the STCF detector system, and discusses future plans for detector R\&D and physics case studies. △ Less

Submitted 5 October, 2023; v1 submitted 28 March, 2023; originally announced March 2023.

Journal ref: Front. Phys. 19(1), 14701 (2024)

Joint k-TE Space Image Reconstruction and Data Fitting for T2 Mapping

Authors: Yan Dai, Xun Jia, Yen-Peng Liao, Jiaen Liu, Jie Deng

Abstract: Objectives: To develop a joint k-TE reconstruction algorithm to reconstruct the T2-weighted (T2W) images and T2 map simultaneously. Materials and Methods: The joint k-TE reconstruction model was formulated as an optimization problem subject to a self-consistency condition of the exponential decay relationship between the T2W images and T2 map. The objective function included a data fidelity term… ▽ More Objectives: To develop a joint k-TE reconstruction algorithm to reconstruct the T2-weighted (T2W) images and T2 map simultaneously. Materials and Methods: The joint k-TE reconstruction model was formulated as an optimization problem subject to a self-consistency condition of the exponential decay relationship between the T2W images and T2 map. The objective function included a data fidelity term enforcing the agreement between the solution and the measured k-space data, together with a spatial regularization term on image properties of the T2W images. The optimization problem was solved using Alternating-Direction Method of Multipliers (ADMM). We tested the joint k-TE method in phantom data and healthy volunteer scans with fully-sampled and under-sampled k-space lines. Image quality of the reconstructed T2W images and T2 map, and the accuracy of T2 measurements derived by the joint k- TE and the conventional signal fitting method were compared. Results: The proposed method improved image quality with reduced noise and less artifacts on both T2W images and T2 map, and increased measurement consistency in T2 relaxation time measurements compared with the conventional method in all data sets. Conclusions: The proposed reconstruction method outperformed the conventional magnitude image-based signal fitting method in image quality and stability of quantitative T2 measurements △ Less

Submitted 11 January, 2023; originally announced January 2023.

Comments: 25 pages, 4 figures, 2 tables

Highly Energetic Electrons Accelerated in Strong Solar Flares as a Preferred Driver of Sunquakes

Authors: H. Wu, Y. Dai, M. D. Ding

Abstract: Sunquakes are enhanced seismic waves excited in some energetic solar flares. Up to now, their origin has still been controversial. In this Letter, we select and study 20 strong flares in Solar Cycle 24, whose impulse phase is fully captured by the \emph{Reuven Ramaty High Energy Solar Spectroscopic Imager} (\emph{RHESSI}). For 11 out of 12 sunquake-active flares in our sample, the hard X-ray (HXR)… ▽ More Sunquakes are enhanced seismic waves excited in some energetic solar flares. Up to now, their origin has still been controversial. In this Letter, we select and study 20 strong flares in Solar Cycle 24, whose impulse phase is fully captured by the \emph{Reuven Ramaty High Energy Solar Spectroscopic Imager} (\emph{RHESSI}). For 11 out of 12 sunquake-active flares in our sample, the hard X-ray (HXR) emission shows a good temporal and spatial correlation with the white-light (WL) enhancement and the sunquake. Spectral analysis also reveals a harder photon spectrum that extends to several hundred keV, implying a considerable population of flare-accelerated nonthermal electrons at high energies. Quantitatively, the total energy of electrons above 300 keV in sunquake-active flares is systematically different from that in sunquake-quiet flares, while the difference is marginal for electrons above 50 keV. All these facts support highly energetic electrons as a preferred driver of the sunquakes. Such an electron-driven scenario can be reasonably accommodated in the framework of a recently proposed selection rule for sunquake generation. For the remaining one event, the sunquake epicenter is cospatial with a magnetic imprint, i.e., a permanent change of magnetic field on the photosphere. Quantitative calculation shows that the flare-induced downward Lorentz force can do enough work to power the sunquake, acting as a viable sunquake driver for this specific event. △ Less

Submitted 7 January, 2023; originally announced January 2023.

Comments: 11 pages, including 1 table and 4 figures. Accepted for publication in ApJL

Tunable optical topological transitions of plasmon polaritons in WTe2 van der Waals films

Authors: Yuangang Xie, Chong Wang, Fucong Fei, Yuqi Li, Qiaoxia Xing, Shenyang Huang, Yuchen Lei, Jiasheng Zhang, Lei Mu, Yaomin Dai, Fengqi Song, Hugen Yan

Abstract: Naturally existing in-plane hyperbolic polaritons and the associated optical topological transitions, which avoid the nano-structuring to achieve hyperbolicity, can outperform their counterparts in artificial metasurfaces. Such plasmon polaritons are rare, but experimentally revealed recently in WTe2 van der Waals thin films. Different from phonon polaritons, hyperbolic plasmon polaritons originat… ▽ More Naturally existing in-plane hyperbolic polaritons and the associated optical topological transitions, which avoid the nano-structuring to achieve hyperbolicity, can outperform their counterparts in artificial metasurfaces. Such plasmon polaritons are rare, but experimentally revealed recently in WTe2 van der Waals thin films. Different from phonon polaritons, hyperbolic plasmon polaritons originate from the interplay of free carrier Drude response and interband transitions, which promise good intrinsic tunability. However, tunable in-plane hyperbolic plasmon polariton and its optical topological transition of the isofrequency contours to the elliptic topology in a natural material have not been realized. Here we demonstrate the tuning of the optical topological transition through Mo-doping and temperature. The optical topological transition energy is tuned over a wide range, with frequencies ranging from 429 cm-1 (23.3 microns) for pure WTe2 to 270 cm-1 (37.0 microns) at the 50% Mo-doping level at 10 K. Moreover, the temperature-induced blueshift of the optical topological transition energy is also revealed, enabling active and reversible tuning. Surprisingly, the localized surface plasmon resonance in skew ribbons shows unusual polarization dependence, accurately manifesting its topology, which renders a reliable means to track the topology with far-field techniques. Our results open an avenue for reconfigurable photonic devices capable of plasmon polariton steering, such as canaling, focusing and routing, and pave a way for low-symmetry plasmonic nanophotonics based on anisotropic natural materials. △ Less

Submitted 9 August, 2023; v1 submitted 14 October, 2022; originally announced October 2022.

Journal ref: Light Sci Appl 12, 193 (2023)

Probing Electronic States in Monolayer Semiconductors through Static and Transient Third-Harmonic Spectroscopy

Authors: Yadong Wang, Fadil Iyikanat, Habib Rostami, Xueyin Bai, Xuerong Hu, Susobhan Das, Yunyun Dai, Luojun Du, Yi Zhang, Shisheng Li, Harri Lipsanen, F. Javier García de Abajo, Zhipei Sun

Abstract: Electronic states and their dynamics are of critical importance for electronic and optoelectronic applications. Here, we probe various relevant electronic states in monolayer MoS2, such as multiple excitonic Rydberg states and free-particle energy bands, with a high relative contrast of up to >200 via broadband (from ~1.79 to 3.10 eV) static third-harmonic spectroscopy, which is further supported… ▽ More Electronic states and their dynamics are of critical importance for electronic and optoelectronic applications. Here, we probe various relevant electronic states in monolayer MoS2, such as multiple excitonic Rydberg states and free-particle energy bands, with a high relative contrast of up to >200 via broadband (from ~1.79 to 3.10 eV) static third-harmonic spectroscopy, which is further supported by theoretical calculations. Moreover, we introduce transient third-harmonic spectroscopy to demonstrate that third-harmonic generation can be all-optically modulated with a modulation depth exceeding ~94% at ~2.18 eV, providing direct evidence of dominant carrier relaxation processes, associated with carrier-exciton and carrier-phonon interactions. Our results indicate that static and transient third-harmonic spectroscopies are not only promising techniques for the characterization of monolayer semiconductors and their heterostructures, but also a potential platform for disruptive photonic and optoelectronic applications, including all-optical modulation and imaging. △ Less

Submitted 13 July, 2022; originally announced July 2022.

Comments: 17 pages, 4 figures

Journal ref: Advanced Materials, 2022, 34, 2107104

FourNetFlows: An efficient model for steady airfoil flows prediction

Authors: Yuanjun Dai, Yiran An, Zhi Li

Abstract: FourNetFlows, the abbreviation of Fourier Neural Network for Airfoil Flows, is an efficient model that provides quick and accurate predictions of steady airfoil flows. We choose the Fourier Neural Operator (FNO) as the backbone architecture and utilize OpenFOAM to generate numerical solutions of airfoil flows for training. Our results indicate that FourNetFlows matches the accuracy of the Semi-Imp… ▽ More FourNetFlows, the abbreviation of Fourier Neural Network for Airfoil Flows, is an efficient model that provides quick and accurate predictions of steady airfoil flows. We choose the Fourier Neural Operator (FNO) as the backbone architecture and utilize OpenFOAM to generate numerical solutions of airfoil flows for training. Our results indicate that FourNetFlows matches the accuracy of the Semi-Implicit Method for Pressure Linked Equations (SIMPLE) integrated with the Spalart-Allmaras turbulence model, one of the numerical algorithms. FourNetFlows is also used to predict flows around an oval whose shape is definitely different from samples in the training set. We note that both qualitative and quantitative results are consistent with the numerical results. Meanwhile, FourNetFlows solves thousands of solutions in seconds, orders of magnitude faster than the classical numerical method. Surprisingly, FourNetFlows achieves model flows with zero-shot super-resolution when it is trained under a lower resolution. And the inferring time is almost constant when the resolution of solutions is increasing. △ Less

Submitted 9 July, 2022; originally announced July 2022.

Orbital shift-induced boundary obstructed topological materials with a large energy gap

Authors: Ning Mao, Runhan Li, Ying Dai, Baibiao Huang, Binghai Yan, Chengwang Niu

Abstract: We propose boundary obstructed topological phases caused by Wannier orbital shift between ordinary atomic sites, which, however, cannot be indicated by symmetry eigenvalues at high symmetry momenta (symmetry indicators) in bulk. On the open boundary, Wannier charge centers can shift to different atoms from those in bulk, leading to in-gap surface states, higher-order hinge states or corner states.… ▽ More We propose boundary obstructed topological phases caused by Wannier orbital shift between ordinary atomic sites, which, however, cannot be indicated by symmetry eigenvalues at high symmetry momenta (symmetry indicators) in bulk. On the open boundary, Wannier charge centers can shift to different atoms from those in bulk, leading to in-gap surface states, higher-order hinge states or corner states. To demonstrate such orbital-shift-induced boundary obstructed topological insulators, we predict eight material candidates, all of which were overlooked in present topological databases. Metallic surface states, hinge states, or corner states cover the large bulk energy gap (for example, more than 1 eV in TlGaTe$_2$) at related boundary, which are ready for experimental detection. Additionally, we find these materials are also fragile topological insulators with hourglass like surface states. △ Less

Submitted 6 July, 2022; originally announced July 2022.

One-step exfoliation method for plasmonic activation of large-area 2D crystals

Authors: Qiang Fu, Jia-Qi Dai, Xin-Yu Huang, Yun-Yun Dai, Yu-Hao Pan, Long-Long Yang, Zhen-Yu Sun, Tai-Min Miao, Meng-Fan Zhou, Lin Zhao, Wei-Jie Zhao, Xu Han, Jun-Peng Lu, Hong-Jun Gao, Xing-Jiang Zhou, Ye-Liang Wang, Zhen-Hua Ni, Wei Ji, Yuan Huang

Abstract: Advanced exfoliation techniques are crucial for exploring the intrinsic properties and applications of 2D materials. Though the recently discovered Au-enhanced exfoliation technique provides an effective strategy for preparation of large-scale 2D crystals, the high cost of gold hinders this method from being widely adopted in industrial applications. In addition, direct Au contact could significan… ▽ More Advanced exfoliation techniques are crucial for exploring the intrinsic properties and applications of 2D materials. Though the recently discovered Au-enhanced exfoliation technique provides an effective strategy for preparation of large-scale 2D crystals, the high cost of gold hinders this method from being widely adopted in industrial applications. In addition, direct Au contact could significantly quench photoluminescence (PL) emission in 2D semiconductors. It is therefore crucial to find alternative metals that can replace gold to achieve efficient exfoliation of 2D materials. Here, we present a one-step Ag-assisted method that can efficiently exfoliate many large-area 2D monolayers, where the yield ratio is comparable to Au-enhanced exfoliation method. Differing from Au film, however, the surface roughness of as-prepared Ag films on SiO2/Si substrate is much higher, which facilitates the generation of surface plasmons resulting from the nanostructures formed on the rough Ag surface. More interestingly, the strong coupling between 2D semiconductor crystals (e.g. MoS2, MoSe2) and Ag film leads to a unique PL enhancement that has not been observed in other mechanical exfoliation techniques, which can be mainly attributed to enhanced light-matter interaction as a result of extended propagation of surface plasmonic polariton (SPP). Our work provides a lower-cost and universal Ag-assisted exfoliation method, while at the same offering enhanced SPP-matter interactions. △ Less

Submitted 4 July, 2022; originally announced July 2022.

Infrared Radiation of Graphene Electrothermal Film Triggered Alpha and Theta Brainwaves

Authors: Yanghua Lu, Renyu Yang, Yue Dai, Deyi Yuan, Xutao Yu, Chang Liu, Lixuan Feng, Runjiang Shen, Can Wang, Shenyi Dai, Shisheng Lin

Abstract: The alpha and theta frequency brainwave activity in Electroencephalogram (EEG) signal has been correlated with attention, inhibitory processes, memory, perceptual abilities, and sleep. The enhanced alpha and theta brainwave activity may bring positive behavioral modifications such as promoting creativity and a quick sleep. Herein, we discover that infrared radiation from multilayer graphene electr… ▽ More The alpha and theta frequency brainwave activity in Electroencephalogram (EEG) signal has been correlated with attention, inhibitory processes, memory, perceptual abilities, and sleep. The enhanced alpha and theta brainwave activity may bring positive behavioral modifications such as promoting creativity and a quick sleep. Herein, we discover that infrared radiation from multilayer graphene electrothermal film can obviously promote the appearance of alpha and theta brainwave in human mind. In particular, the occurrence frequency of the alpha and theta waves in EEG can be effectively enhanced up to 2.3 and 3.0 times, respectively. And the duration time of the alpha and theta waves in EEG can also be effectively extended. The mechanism may be attributed to the efficient infrared radiation caused by graphene mainly focused on the range from 7 to 14 micron, coinciding with the radiation wavelength of natural human body, which can be effectively absorbed by the human skin and speed up the blood microcirculation and metabolism. The comparative effect of different working temperature and heating materials such as water, Cu and even monolayer graphene are systematically investigated, indicating the infrared radiation from the multilayer graphene electrothermal film at 50 degrees has the largest enhancement effect of alpha and theta brainwaves. The multilayer graphene film electrical heater represents a convenient and surprising way for triggering the alpha and theta brainwaves, which has many potential applications in the area of enlarged health cerements. △ Less

Submitted 14 June, 2022; originally announced June 2022.

Irradiation Facilities and Irradiation Methods for High Power Target

Authors: F. Pellemoine, C. Barbier, Y. Sun, K. Ammigan, S. Bidhar, B. Zwaska, D. McClintock, S. Taller, D. Winder, C. S. Cutler, D. Kim, Y. Chiu, M. Freer, C. Wheldon, A. Gottberg, F. Boix Pamies, M. Calviani, N. Charitonidis, R. Garcia Alia, F. Ravotti, S. Danzeca, A. P. Bernardes, N. Moncoffre, S. Meigo, T. Ishida , et al. (16 additional authors not shown)

Abstract: High Power Target systems are key elements in future neutrino and other rare particle production in accelerators. These systems transform an intense source of protons into secondary particles of interest to enable new scientific discoveries. As beam intensity and energies increase, target systems face significant challenges. Radiation damages and thermal shocks in target materials were identified… ▽ More High Power Target systems are key elements in future neutrino and other rare particle production in accelerators. These systems transform an intense source of protons into secondary particles of interest to enable new scientific discoveries. As beam intensity and energies increase, target systems face significant challenges. Radiation damages and thermal shocks in target materials were identified as the leading cross-cutting challenges of high-power target facilities. Target material R&D to address these challenges are essential to enable and ensure reliable operation of future-generation accelerators. Irradiation facilities and alternative methods are critical to provide a full support of material R&D and better address these critical challenges. △ Less

Submitted 14 December, 2022; v1 submitted 15 March, 2022; originally announced March 2022.

Comments: contribution to Snowmass 2021

Report number: FERMILAB-CONF-22-124-AD

Photon polarization effects in polarized electron-positron pair production in a strong laser field

Authors: Ya-Nan Dai, Bai-Fei Shen, Jian-Xing Li, Rashid Shaisultanov, Karen Z. Hatsagortsyan, Christoph H. Keitel, Yue-Yue Chen

Abstract: Deep understanding of photon polarization impact on pair production is essential for the efficient creation of laser driven polarized positron beams, and demands a complete description of polarization effects in strong-field QED processes. We investigate, employing fully polarization resolved Monte Carlo simulations, the correlated photon and electron (positron) polarization effects in multiphoton… ▽ More Deep understanding of photon polarization impact on pair production is essential for the efficient creation of laser driven polarized positron beams, and demands a complete description of polarization effects in strong-field QED processes. We investigate, employing fully polarization resolved Monte Carlo simulations, the correlated photon and electron (positron) polarization effects in multiphoton Breit-Wheeler pair production process during the interaction of an ultrarelativistic electron beam with a counterpropagating elliptically polarized laser pulse. We showed that the polarization of e^-e^+ pairs is degraded by 35\%, when the polarization of the intermediate photon is resolved, accompanied with an approximately 13\% decrease of the pair yield. Moreover, the polarization direction of energetic positrons in small angle region is reversed, which originates from the pair production of hard photons with polarization parallel with electric field. △ Less

Submitted 11 July, 2021; originally announced July 2021.

Strain engineering of ion migration in LiCoO2

Authors: Jia-Jing Li, Yang Dai, Jin-Cheng Zheng

Abstract: Strain engineering is a powerful approach for tuning various properties of functional materials. The influences of lattice strain on the Li-ion migration energy barrier of lithium-ions in layered LiCoO2 have been systemically studied using lattice dynamics simulations, analytical function and neural network method. We have identified two Li-ion migration paths, oxygen dumbbell hop (ODH), and tetra… ▽ More Strain engineering is a powerful approach for tuning various properties of functional materials. The influences of lattice strain on the Li-ion migration energy barrier of lithium-ions in layered LiCoO2 have been systemically studied using lattice dynamics simulations, analytical function and neural network method. We have identified two Li-ion migration paths, oxygen dumbbell hop (ODH), and tetrahedral site hop (TSH) with different concentrations of local defects. We found that Li-ion migration energy barriers increased with the increase of pressure for both ODH and TSH cases, while decreased significantly with applied tensile uniaxial c-axis strain for ODH and TSH cases or compressive in-plane strain for TSH case. Our work provides the complete strain-map for enhancing the diffusivity of Li-ion in LiCoO2, and therefore, indicates a new way to achieve better rate performance through strain engineering. △ Less

Submitted 21 July, 2021; v1 submitted 22 May, 2021; originally announced May 2021.

Comments: Revised with minor corrections

Journal ref: Frontiers of Physics, 17(1), 13503 (2022)

Dynamic Equation in Thermo-piezoelectric Dissipative Media from Energy Conservation

Authors: Yinqiu Zhou, Xiuming Wang, Yuyu Dai

Abstract: A methodology is proposed for formulating dynamic equations in thermo-piezoelectric and dissipative media from the first principle of energy conservation. The results are in agreement with those from Hamiltonian principle. Our formulations based on energy conservation are much easier to understand. What is more is that, the energy conservation based framework is able to handle dissipation problems… ▽ More A methodology is proposed for formulating dynamic equations in thermo-piezoelectric and dissipative media from the first principle of energy conservation. The results are in agreement with those from Hamiltonian principle. Our formulations based on energy conservation are much easier to understand. What is more is that, the energy conservation based framework is able to handle dissipation problems, which is usually behind the scope of Hamiltonian principle. In our case, the mechanical, electric and thermal phenomena firstly are taken into account, and then the medium with dissipation is included. The formulations on acoustic dynamic equation and the associated constitutive relations of the medium will also pave an alternative way in computational dynamic modelling based on weak formulations. In addition, our methodology may be extended to other dynamic equation formulations, such as in electrodynamics, fluid mechanics and quantum mechanics. This is especially true for tackling the problems with multi-physical field interactions and coupling. △ Less

Submitted 26 April, 2021; originally announced April 2021.

Comments: 6 pages

ACM Class: A.0

Anomalous reflection at the interface of binary synthetic photonic lattices

Authors: Zhiqing Zhang, Yanan Dai, Zengrun Wen, Zhenjuan Liu, Haohao Wang, Yuanmei Gao, Yanlong Shen, Xinyuan Qi

Abstract: We construct a binary synthetic photonic lattice theoretically with an effective magnetic field by projecting two fiber loops' light intensity and adjusting the phase distribution precisely. By tuning the phase modulator, wave vector, and propagation constant of an effective waveguide, the interface's transmittance could be manipulated. Further light dynamics show that the light pulse can achieve… ▽ More We construct a binary synthetic photonic lattice theoretically with an effective magnetic field by projecting two fiber loops' light intensity and adjusting the phase distribution precisely. By tuning the phase modulator, wave vector, and propagation constant of an effective waveguide, the interface's transmittance could be manipulated. Further light dynamics show that the light pulse can achieve total reflection without diffraction and exchanges the light energy in two optical fiber loops completely when phase distribution and wave vector meet certain conditions. Our study may provide a new way to realize optical switches in optical interconnection and optical communication. △ Less

Submitted 15 March, 2021; v1 submitted 9 March, 2021; originally announced March 2021.

Comments: 4 pages, 4 figures

Neutronics Analysis for MSR Cell with Different Fuel Salt Channel Geometry

Authors: Shihe Yu, Yafen Liu, Pu Yang, Ruimin Ji, Guifeng Zhu Bo Zhou, Xuzhong Kang, Rui Yan, Yang Zou, Ye Dai

Abstract: The neutronic properties of Molten Salt Reactor are different from that of traditional solid-fuel reactors due to its nuclear fuel particularity. Based upon MCNP code, the influence of the size and shape of fuel salt channel on neutron physics of MSR cell was studied systematically in this work. The results show that the infinite multiplication factors increases first and then decreases with the c… ▽ More The neutronic properties of Molten Salt Reactor are different from that of traditional solid-fuel reactors due to its nuclear fuel particularity. Based upon MCNP code, the influence of the size and shape of fuel salt channel on neutron physics of MSR cell was studied systematically in this work. The results show that the infinite multiplication factors increases first and then decreases with the change of graphite cell size under the condition of given fuel volume fraction. In the case of the same FVF and average chord length, when the average chord length is relatively small, the k values with different fuel salt channel shapes are in good agreement; when the average chord length is relatively large, the k values with different fuel salt channel shapes are greatly different. In addition, some examples of practical application of this work are illustrated in the end, including cell selection for the core and thermal expansion displacement analysis of the cell. △ Less

Submitted 20 January, 2021; originally announced January 2021.

Intrinsic feature between malignant tumor cells and human normal leukocytes with statistical decision tree analysis via Raman spectroscopy

Authors: Yixin Dai, Wenxue Li, Liu Wang, Chuan Luo, Qing Huang, Lin Pang

Abstract: In this study, the combination of a developing data mining technique called statistical decision tree analysis method and Raman spectroscopy was proposed to differentiate human normal leukocytes from malignant tumor cells. Statistical results obtained indicate this method possesses an admirable performance of a mean classification accuracy of 94.43% on the one hand, base adenine and amide I are re… ▽ More In this study, the combination of a developing data mining technique called statistical decision tree analysis method and Raman spectroscopy was proposed to differentiate human normal leukocytes from malignant tumor cells. Statistical results obtained indicate this method possesses an admirable performance of a mean classification accuracy of 94.43% on the one hand, base adenine and amide I are recognized as potential characterizations of main- and subintrinsic biological difference in between on the other hand. Moreover, these certain Raman bands reflecting intrinsic physiological differences can be directionally extracted from whole fingerprint spectra and then provide a fast and accurate manipulation for spectrum identification. △ Less

Submitted 29 November, 2020; originally announced November 2020.

Comments: 10 pages, 3 figures

Mid-infrared single photon detector with superconductor Mo$_{80}$Si$_{20}$ nanowire

Authors: Qi Chen, Rui Ge, Labao Zhang, Feiyan Li, Biao Zhang, Yue Dai, Yue Fei, Xiaohan Wang, Xiaoqing Jia, Qingyuan Zhao, Xuecou Tu, Lin Kang, Jian Chen, Peiheng Wu

Abstract: A mid-infrared single photon detector (MIR-SNSPD) was reported based on 30 nm-wide superconductor molybdenum silicide nanowires in this work. Saturated quantum efficiencies (QEs) were achieved at the wavelength ranging from 1.55 to 5.07 micrometer in experiments. At the same time, the intrinsic dark count rate (DCR) was below 100 cps. Thus, this device produced a noise equivalent power (NEP) of 4.… ▽ More A mid-infrared single photon detector (MIR-SNSPD) was reported based on 30 nm-wide superconductor molybdenum silicide nanowires in this work. Saturated quantum efficiencies (QEs) were achieved at the wavelength ranging from 1.55 to 5.07 micrometer in experiments. At the same time, the intrinsic dark count rate (DCR) was below 100 cps. Thus, this device produced a noise equivalent power (NEP) of 4.5 * 10-19 W/sqrt(Hz). The results provide the foundation of developing 10 micrometer-SNSPD for the applications of infrared astronomy observation. △ Less

Submitted 12 November, 2020; originally announced November 2020.

Microwave Photonic Ising Machine

Authors: Qizhuang Cen, Tengfei Hao, Hao Ding, Shanhong Guan, Zhiqiang Qin, Kun Xu, Yitang Dai, Ming Li

Abstract: Ising machines based on analog systems have the potential of acceleration in solving ubiquitous combinatorial optimization problems. Although some artificial spins to support large-scale Ising machine is reported, e.g. superconducting qubits in quantum annealers and short optical pulses in coherent Ising machines, the spin coherence is fragile due to the ultra-low equivalent temperature or optical… ▽ More Ising machines based on analog systems have the potential of acceleration in solving ubiquitous combinatorial optimization problems. Although some artificial spins to support large-scale Ising machine is reported, e.g. superconducting qubits in quantum annealers and short optical pulses in coherent Ising machines, the spin coherence is fragile due to the ultra-low equivalent temperature or optical phase sensitivity. In this paper, we propose to use short microwave pulses generated from an optoelectronic parametric oscillator as the spins to implement the Ising machine with large scale and also high coherence under room temperature. The proposed machine supports 10,000 spins, and the high coherence leads to accurate computation. Moreover, the Ising machine is highly compatible with high-speed electronic devices for programmability, paving a low-cost, accurate, and easy-to-implement way toward to solve real-world optimization problems. △ Less

Submitted 18 September, 2020; originally announced November 2020.

Discovery of dissipative microwave photonic solitons

Authors: Tengfei Hao, Hao Ding, Wei Li, Ninghua Zhu, Yitang Dai, Ming Li

Abstract: Dissipative solitons rely on the double balance between nonlinearity and dispersion as well as gain and loss have attracted a lot of attention in optics, since it gives rise to ultrashort pulses and broadband frequency combs with good stability and smooth spectral envelopes. Here we observe a novel dissipative solitons in microwave photonics that gives rise to wideband tunable frequency hopping mi… ▽ More Dissipative solitons rely on the double balance between nonlinearity and dispersion as well as gain and loss have attracted a lot of attention in optics, since it gives rise to ultrashort pulses and broadband frequency combs with good stability and smooth spectral envelopes. Here we observe a novel dissipative solitons in microwave photonics that gives rise to wideband tunable frequency hopping microwave signals with fast frequency switching speed. The dissipative microwave photonic solitions are achieved through the double balance between nonlinear gain saturation and linear filtering as well as gain and loss in a microwave photonic resonant cavity. The generation of dissipative solitons with different pulse width, repletion rate and number of solitons per round-trip time are observed, together with the corresponding wideband tunable frequency hopping microwave signals. This work opens new avenues for signal generation, processing and control based on the principle of solitons in microwave photonics, and has great potential in many applications such as modern radars, electronic warfare systems, and telecommunications. △ Less

Submitted 17 September, 2020; originally announced September 2020.

PT-symmetric topological near-zero interface state

Authors: Zhenjuan Liu, Kaiwen Ji, Haohao Wang, Yanan Dai, Yuanmei Gao, Yanlong Shen, Yishan Wang, Xinyuan Qi, Jintao Bai

Abstract: Photonic systems with parity-time (PT) symmetry and topology are attracting considerable attentions. In this work, topological near-zero edge states are studied in PT-symmetric photonic lattice and the results indicate that the near-zero edge states can be broken spontaneously in spite of the unbroken PT symmetry. To achieve the stable topological near-zero mode, a binary lattice with carefully de… ▽ More Photonic systems with parity-time (PT) symmetry and topology are attracting considerable attentions. In this work, topological near-zero edge states are studied in PT-symmetric photonic lattice and the results indicate that the near-zero edge states can be broken spontaneously in spite of the unbroken PT symmetry. To achieve the stable topological near-zero mode, a binary lattice with carefully designed PT-symmetric is proposed. Further study shows such a structure supports a stable topological interface state experiences phase transition similar to the bulk states in infinite lattice and thus possess real-eigenvalues even with unbroken PT phase. Our study enriches the content of non-Hermitian topological physics and might have potential applications in the fields of topological lasing and quantum computation. △ Less

Submitted 7 October, 2020; v1 submitted 7 September, 2020; originally announced September 2020.

Lyman Continuum Escape Fraction from Low-mass Starbursts at z=1.3

Authors: Anahita Alavi, James Colbert, Harry I. Teplitz, Brian Siana, Claudia Scarlata, Michael Rutkowski, Vihang Mehta, Alaina Henry, Y. Sophia Dai, Francesco Haardt, Micaela Bagley

Abstract: We present a new constraint on the Lyman Continuum (LyC) escape fraction at z~1.3. We obtain deep, high sensitivity far-UV imaging with the Advanced Camera for Surveys (ACS) Solar Blind Channel (SBC) on the Hubble Space Telescope (HST), targeting 11 star-forming galaxies at 1.2<z<1.4. The galaxies are selected from the 3D-HST survey to have high H$α$ equivalent width (EW) with EW > 190 Å, low stel… ▽ More We present a new constraint on the Lyman Continuum (LyC) escape fraction at z~1.3. We obtain deep, high sensitivity far-UV imaging with the Advanced Camera for Surveys (ACS) Solar Blind Channel (SBC) on the Hubble Space Telescope (HST), targeting 11 star-forming galaxies at 1.2<z<1.4. The galaxies are selected from the 3D-HST survey to have high H$α$ equivalent width (EW) with EW > 190 Å, low stellar mass (M* < 10^10 M_sun) and U-band magnitude of U<24.2. These criteria identify young, low metallicity star bursting populations similar to the primordial star-forming galaxies believed to have reionized the universe. We do not detect any LyC signal (with S/N >3) in the individual galaxies or in the stack in the far-UV images. We place $3σ$ limits on the relative escape fraction of individual galaxies to be f_{esc,rel}<[0.10-0.22] and a stacked $3σ$ limit of f_{esc,rel}<0.07. Comparing to the confirmed LyC emitters from the literature, the galaxies in our sample span similar ranges of various galaxy properties including stellar mass, dust attenuation, and star formation rate (SFR). In particular, we compare the distribution of H$α$ and [OIII] EWs of confirmed LyC emitters and non-detections including the galaxies in this study. Finally, we discuss if a dichotomy seen in the distribution of H$α$ EWs can perhaps distinguish the LyC emitters from the non-detections. △ Less

Submitted 10 July, 2020; originally announced July 2020.

Comments: 16 pages, 10 Figures, 2 Tables

Arbitrary manipulations of dual harmonics and their wave behaviors based on space-time-coding digital metasurface

Authors: Jun Yan Dai, Jin Yang, Wankai Tang, Ming Zheng Chen, Jun Chen Ke, Qiang Cheng, Shi Jin, Tie Jun Cui

Abstract: Space-time modulated metasurfaces have attracted significant attention due to the additional degree of freedom in manipulating the electromagnetic (EM) waves in both space and time domains. However, the existing techniques have limited wave control capabilities, leading to just a few feasible schemes like regulation of only one specific harmonic. Here, we propose to realize independent manipulatio… ▽ More Space-time modulated metasurfaces have attracted significant attention due to the additional degree of freedom in manipulating the electromagnetic (EM) waves in both space and time domains. However, the existing techniques have limited wave control capabilities, leading to just a few feasible schemes like regulation of only one specific harmonic. Here, we propose to realize independent manipulations of arbitrarily dual harmonics and their wave behaviors using a space-time-coding (STC) digital metasurface. By employing different STC sequences to the reflection phase of the metasurface, independent phase-pattern configurations of two desired harmonics can be achieved simultaneously, which further leads to independent beam shaping at the two harmonic frequencies. An analytical theory is developed to offer the physical insights in the arbitrary dual-harmonic manipulations of spectra and spatial beams, which is verified by experiments with good agreements. The presented STC strategy provides a new way to design multifunctional programmable systems, which will find potential applications such as cognitive radar and multi-user wireless communications. △ Less

Submitted 26 June, 2020; originally announced July 2020.

Comments: 21 pages, 6 figures

Identification of single spectral lines through supervised machine learning in a large HST survey (WISP): a pilot study for Euclid and WFIRST

Authors: I. Baronchelli, C. M. Scarlata, G. Rodighiero, L. Rodríguez-Muñoz, M. Bonato, M. Bagley, A. Henry, M. Rafelski, M. Malkan, J. Colbert, Y. S. Dai, H. Dickinson, C. Mancini, V. Mehta, L. Morselli, H. I. Teplitz

Abstract: Future surveys focusing on understanding the nature of dark energy (e.g., Euclid and WFIRST) will cover large fractions of the extragalactic sky in near-IR slitless spectroscopy. These surveys will detect a large number of galaxies that will have only one emission line in the covered spectral range. In order to maximize the scientific return of these missions, it is imperative that single emission… ▽ More Future surveys focusing on understanding the nature of dark energy (e.g., Euclid and WFIRST) will cover large fractions of the extragalactic sky in near-IR slitless spectroscopy. These surveys will detect a large number of galaxies that will have only one emission line in the covered spectral range. In order to maximize the scientific return of these missions, it is imperative that single emission lines are correctly identified. Using a supervised machine-learning approach, we classified a sample of single emission lines extracted from the WFC3 IR Spectroscopic Parallel survey (WISP), one of the closest existing analogs to future slitless surveys. Our automatic software integrates a SED fitting strategy with additional independent sources of information. We calibrated it and tested it on a "gold" sample of securely identified objects with multiple lines detected. The algorithm correctly classifies real emission lines with an accuracy of 82.6%, whereas the accuracy of the SED fitting technique alone is low (~50%) due to the limited amount of photometric data available (<=6 bands). While not specifically designed for the Euclid and WFIRST surveys, the algorithm represents an important precursor of similar algorithms to be used in these future missions. △ Less

Submitted 22 June, 2020; originally announced June 2020.