-
Near-field optical mode engineering-enabled freeform nonlocal metasurfaces
Authors:
Zhongjun Jiang,
Tianxiang Dai,
Shuwei Guo,
Soyaib Sohag,
Yixuan Shao,
Chenkai Mao,
Andrea Alù,
Jonathan A. Fan,
You Zhou
Abstract:
Nanophotonic technologies inherently rely on tailoring light-matter interactions through the excitation and interference of deeply confined optical resonances. However, existing concepts in optical mode engineering remain heuristic and are challenging to extend towards complex and multi-functional resonant phenomena. Here, we introduce an inverse design framework that optimizes near-field distribu…
▽ More
Nanophotonic technologies inherently rely on tailoring light-matter interactions through the excitation and interference of deeply confined optical resonances. However, existing concepts in optical mode engineering remain heuristic and are challenging to extend towards complex and multi-functional resonant phenomena. Here, we introduce an inverse design framework that optimizes near-field distributions, ideally suited to tailor Mie-type modes within dielectric nanophotonic structures, and we demonstrate its powerful opportunities to facilitate the discovery of new classes of nonlocal metasurfaces. We show that freeform nonlocal metasurfaces supporting accidental bound states in the continuum can be readily optimized to tackle tailored illumination conditions, modal properties and quality factors. We further extend our approach to multifunctional and multipolar mode engineering, and experimentally demonstrate freeform planar nonlocal multi-wavelength and chiral metasurfaces. Our versatile and robust framework for freeform mode engineering has applications in a broad range of high quality-factor metasurface platforms relevant to sensing, nonlinear optics, optomechanics and quantum information processing.
△ Less
Submitted 18 June, 2025;
originally announced June 2025.
-
Shaping freeform nanophotonic devices with geometric neural parameterization
Authors:
Tianxiang Dai,
Yixuan Shao,
Chenkai Mao,
Yu Wu,
Sara Azzouz,
You Zhou,
Jonathan A. Fan
Abstract:
Nanophotonic freeform design has the potential to push the performance of optical components to new limits, but there remains a challenge to effectively perform optimization while reliably enforcing design and manufacturing constraints. We present Neuroshaper, a framework for freeform geometric parameterization in which nanophotonic device layouts are defined using an analytic neural network repre…
▽ More
Nanophotonic freeform design has the potential to push the performance of optical components to new limits, but there remains a challenge to effectively perform optimization while reliably enforcing design and manufacturing constraints. We present Neuroshaper, a framework for freeform geometric parameterization in which nanophotonic device layouts are defined using an analytic neural network representation. Neuroshaper serves as a qualitatively new way to perform shape optimization by capturing multi-scalar, freeform geometries in an overparameterized representation scheme, enabling effective optimization in a smoothened, high dimensional geometric design space. We show that Neuroshaper can enforce constraints and topology manipulation in a manner where local constraints lead to global changes in device morphology. We further show numerically and experimentally that Neuroshaper can apply to a diversity of nanophotonic devices. The versatility and capabilities of Neuroshaper reflect the ability of neural representation to augment concepts in topological design.
△ Less
Submitted 23 May, 2025;
originally announced May 2025.
-
A High-Precision, Fast, Robust, and Cost-Effective Muon Detector Concept for the FCC-ee
Authors:
F. Anulli,
H. Beauchemin,
C. Bini,
A. Bross,
M. Corradi,
T. Dai,
D. Denisov,
E. C. Dukes,
C. Ferretti,
P. Fleischmann,
M. Franklin,
J. Freeman,
J. Ge,
L. Guan,
Y. Guo,
C. Herwig,
S. -C. Hsu,
J. Huth,
D. Levin,
C. Li,
H. -C. Lin,
H. Lubatti,
C. Luci,
V. Martinez Outschoorn,
K. Nelson
, et al. (15 additional authors not shown)
Abstract:
We propose a high-precision, fast, robust and cost-effective muon detector concept for an FCC-ee experiment. This design combines precision drift tubes with fast plastic scintillator strips to enable both spatial and timing measurements. The drift tubes deliver two-dimensional position measurements perpendicular to the tubes with a resolution around 100~$μ$m. Meanwhile, the scintillator strips, re…
▽ More
We propose a high-precision, fast, robust and cost-effective muon detector concept for an FCC-ee experiment. This design combines precision drift tubes with fast plastic scintillator strips to enable both spatial and timing measurements. The drift tubes deliver two-dimensional position measurements perpendicular to the tubes with a resolution around 100~$μ$m. Meanwhile, the scintillator strips, read out with the wavelength-shifting fibers and silicon photomultipliers, provide fast timing information with a precision of 200~ps or better and measure the third coordinate along the tubes with a resolution of about 1~mm.
△ Less
Submitted 14 April, 2025;
originally announced April 2025.
-
A multi-agentic framework for real-time, autonomous freeform metasurface design
Authors:
Robert Lupoiu,
Yixuan Shao,
Tianxiang Dai,
Chenkai Mao,
Kofi Edee,
Jonathan A. Fan
Abstract:
Innovation in nanophotonics currently relies on human experts who synergize specialized knowledge in photonics and coding with simulation and optimization algorithms, entailing design cycles that are time-consuming, computationally demanding, and frequently suboptimal. We introduce MetaChat, a multi-agentic design framework that can translate semantically described photonic design goals into high-…
▽ More
Innovation in nanophotonics currently relies on human experts who synergize specialized knowledge in photonics and coding with simulation and optimization algorithms, entailing design cycles that are time-consuming, computationally demanding, and frequently suboptimal. We introduce MetaChat, a multi-agentic design framework that can translate semantically described photonic design goals into high-performance, freeform device layouts in an automated, nearly real-time manner. Multi-step reasoning is enabled by our Agentic Iterative Monologue (AIM) paradigm, which coherently interfaces agents with code-based tools, other specialized agents, and human designers. Design acceleration is facilitated by Feature-wise Linear Modulation-conditioned Maxwell surrogate solvers that support the generalized evaluation of metasurface structures. We use freeform dielectric metasurfaces as a model system and demonstrate with MetaChat the design of multi-objective, multi-wavelength metasurfaces orders of magnitude faster than conventional methods. These concepts present a scientific computing blueprint for utilizing specialist design agents, surrogate solvers, and human interactions to drive multi-physics innovation and discovery.
△ Less
Submitted 26 March, 2025;
originally announced March 2025.
-
Machine learning surrogates for efficient hydrologic modeling: Insights from stochastic simulations of managed aquifer recharge
Authors:
Timothy Dai,
Kate Maher,
Zach Perzan
Abstract:
Process-based hydrologic models are invaluable tools for understanding the terrestrial water cycle and addressing modern water resources problems. However, many hydrologic models are computationally expensive and, depending on the resolution and scale, simulations can take on the order of hours to days to complete. While techniques such as uncertainty quantification and optimization have become va…
▽ More
Process-based hydrologic models are invaluable tools for understanding the terrestrial water cycle and addressing modern water resources problems. However, many hydrologic models are computationally expensive and, depending on the resolution and scale, simulations can take on the order of hours to days to complete. While techniques such as uncertainty quantification and optimization have become valuable tools for supporting management decisions, these analyses typically require hundreds of model simulations, which are too computationally expensive to perform with a process-based hydrologic model. To address this gap, we assess a hybrid modeling workflow in which a process-based model is used to generate an initial set of simulations and a machine learning (ML) surrogate model is then trained to perform the remaining simulations required for downstream analysis. As a case study, we apply this workflow to simulations of variably saturated groundwater flow at a prospective managed aquifer recharge site. We compare the accuracy and computational efficiency of several ML architectures, including deep convolutional networks, recurrent neural networks, vision transformers, and networks with Fourier transforms. Our results demonstrate that ML surrogate models can achieve under 10% mean absolute percentage error and yield order-of-magnitude runtime savings over process-based models. Building on these findings, we examine the impacts of key modeling choices on surrogate model accuracy and efficiency. Results show that a normalized loss function improves training stability, while min-max data normalization can significantly reduce error up to a factor of 10 when compared to other treatments such as Z-score and no normalization. Downsampling input features using an autoencoder also decreases memory requirements by training with tensors 4% their original size. By reducing computational costs and...
△ Less
Submitted 9 February, 2025; v1 submitted 30 July, 2024;
originally announced July 2024.
-
Towards General Neural Surrogate Solvers with Specialized Neural Accelerators
Authors:
Chenkai Mao,
Robert Lupoiu,
Tianxiang Dai,
Mingkun Chen,
Jonathan A. Fan
Abstract:
Surrogate neural network-based partial differential equation (PDE) solvers have the potential to solve PDEs in an accelerated manner, but they are largely limited to systems featuring fixed domain sizes, geometric layouts, and boundary conditions. We propose Specialized Neural Accelerator-Powered Domain Decomposition Methods (SNAP-DDM), a DDM-based approach to PDE solving in which subdomain proble…
▽ More
Surrogate neural network-based partial differential equation (PDE) solvers have the potential to solve PDEs in an accelerated manner, but they are largely limited to systems featuring fixed domain sizes, geometric layouts, and boundary conditions. We propose Specialized Neural Accelerator-Powered Domain Decomposition Methods (SNAP-DDM), a DDM-based approach to PDE solving in which subdomain problems containing arbitrary boundary conditions and geometric parameters are accurately solved using an ensemble of specialized neural operators. We tailor SNAP-DDM to 2D electromagnetics and fluidic flow problems and show how innovations in network architecture and loss function engineering can produce specialized surrogate subdomain solvers with near unity accuracy. We utilize these solvers with standard DDM algorithms to accurately solve freeform electromagnetics and fluids problems featuring a wide range of domain sizes.
△ Less
Submitted 14 June, 2024; v1 submitted 2 May, 2024;
originally announced May 2024.
-
A programmable topological photonic chip
Authors:
Tianxiang Dai,
Anqi Ma,
Jun Mao,
Yutian Ao,
Xinyu Jia,
Yun Zheng,
Chonghao Zhai,
Yan Yang,
Zhihua Li,
Bo Tang,
Jun Luo,
Baile Zhang,
Xiaoyong Hu,
Qihuang Gong,
Jianwei Wang
Abstract:
Controlling topological phases of light has allowed experimental observations of abundant topological phenomena and development of robust photonic devices. The prospect of more sophisticated controls with topological photonic devices for practical implementations requires high-level programmability. Here, we demonstrate a fully programmable topological photonic chip with large-scale integration of…
▽ More
Controlling topological phases of light has allowed experimental observations of abundant topological phenomena and development of robust photonic devices. The prospect of more sophisticated controls with topological photonic devices for practical implementations requires high-level programmability. Here, we demonstrate a fully programmable topological photonic chip with large-scale integration of silicon photonic nanocircuits and microresonators. Photonic artificial atoms and their interactions in our compound system can be individually addressed and controlled, therefore allowing arbitrary altering of structural parameters and geometrical configurations for the observations of dynamic topological phase transitions and diverse photonic topological insulators. By individually programming artificial atoms on the generic chip, it has allowed comprehensive statistic characterisations of topological robustness against relatively weak disorders, as well as counterintuitive topological Anderson phase transitions induced by strong disorders. Our generic topological photonic chip that can be rapidly reprogrammed to implement multifunctionalities, prototypes a flexible and versatile platform for possible applications across fundamental science and topological technologies.
△ Less
Submitted 13 March, 2024;
originally announced March 2024.
-
Graphene/silicon heterojunction for reconfigurable phase-relevant activation function in coherent optical neural networks
Authors:
Chuyu Zhong,
Kun Liao,
Tianxiang Dai,
Maoliang Wei,
Hui Ma,
Jianghong Wu,
Zhibin Zhang,
Yuting Ye,
Ye Luo,
Zequn Chen,
Jialing Jian,
Chulei Sun,
Bo Tang,
Peng Zhang,
Ruonan Liu,
Junying Li,
Jianyi Yang,
Lan Li,
Kaihui Liu,
Xiaoyong Hu,
Hongtao Lin
Abstract:
Optical neural networks (ONNs) herald a new era in information and communication technologies and have implemented various intelligent applications. In an ONN, the activation function (AF) is a crucial component determining the network performances and on-chip AF devices are still in development. Here, we first demonstrate on-chip reconfigurable AF devices with phase activation fulfilled by dual-f…
▽ More
Optical neural networks (ONNs) herald a new era in information and communication technologies and have implemented various intelligent applications. In an ONN, the activation function (AF) is a crucial component determining the network performances and on-chip AF devices are still in development. Here, we first demonstrate on-chip reconfigurable AF devices with phase activation fulfilled by dual-functional graphene/silicon (Gra/Si) heterojunctions. With optical modulation and detection in one device, time delays are shorter, energy consumption is lower, reconfigurability is higher and the device footprint is smaller than other on-chip AF strategies. The experimental modulation voltage (power) of our Gra/Si heterojunction achieves as low as 1 V (0.5 mW), superior to many pure silicon counterparts. In the photodetection aspect, a high responsivity of over 200 mA/W is realized. Special nonlinear functions generated are fed into a complex-valued ONN to challenge handwritten letters and image recognition tasks, showing improved accuracy and potential of high-efficient, all-component-integration on-chip ONN. Our results offer new insights for on-chip ONN devices and pave the way to high-performance integrated optoelectronic computing circuits.
△ Less
Submitted 13 July, 2023;
originally announced July 2023.
-
Construction of Precision sMDT Detector for ATLAS Muon Spectrometer Upgrade
Authors:
D. Amidei,
N. Anderson,
A. Chen,
E. Carpenter,
L. Cooperrider,
T. Dai,
E. Diehl,
C. Ferretti,
Y. Guo,
J. Li,
X. Meng,
K. Nelson,
V. Pillsbury,
E. Salzer,
T. Schwarz,
L. Simpson,
Z. Wang,
C. Weaverdyck,
C. Wei,
Z. Yang,
M. Yuan,
B. Zhou,
J. Zhu
Abstract:
This paper describes the small-diameter monitored drift-tube detector construction at the University of Michigan as a contribution to the ATLAS Muon Spectrometer upgrade for the high-luminosity Large Hadron Collider at CERN. Measurements of the first 30 chambers built at Michigan show that the drift tube wire position accuracy meets the specification of 20 microns. The positions of the platforms f…
▽ More
This paper describes the small-diameter monitored drift-tube detector construction at the University of Michigan as a contribution to the ATLAS Muon Spectrometer upgrade for the high-luminosity Large Hadron Collider at CERN. Measurements of the first 30 chambers built at Michigan show that the drift tube wire position accuracy meets the specification of 20 microns. The positions of the platforms for alignment and magnetic field sensors are all installed well within the required precision. The cosmic ray test measurements show single wire tracking resolution of 100 +- 7 microns with an average detection efficiency above 99 %. The infrastructure, tooling, techniques, and procedures for chamber production are described in detail. The results from the chamber quality control tests of the first 30 constructed chambers are reported.
△ Less
Submitted 1 November, 2022;
originally announced November 2022.
-
Search for relativistic fractionally charged particles in space
Authors:
DAMPE Collaboration,
F. Alemanno,
C. Altomare,
Q. An,
P. Azzarello,
F. C. T. Barbato,
P. Bernardini,
X. J. Bi,
M. S. Cai,
E. Casilli,
E. Catanzani,
J. Chang,
D. Y. Chen,
J. L. Chen,
Z. F. Chen,
M. Y. Cui,
T. S. Cui,
Y. X. Cui,
H. T. Dai,
A. De-Benedittis,
I. De Mitri,
F. de Palma,
M. Deliyergiyev,
A. Di Giovanni,
M. Di Santo
, et al. (126 additional authors not shown)
Abstract:
More than a century after the performance of the oil drop experiment, the possible existence of fractionally charged particles FCP still remains unsettled. The search for FCPs is crucial for some extensions of the Standard Model in particle physics. Most of the previously conducted searches for FCPs in cosmic rays were based on experiments underground or at high altitudes. However, there have been…
▽ More
More than a century after the performance of the oil drop experiment, the possible existence of fractionally charged particles FCP still remains unsettled. The search for FCPs is crucial for some extensions of the Standard Model in particle physics. Most of the previously conducted searches for FCPs in cosmic rays were based on experiments underground or at high altitudes. However, there have been few searches for FCPs in cosmic rays carried out in orbit other than AMS-01 flown by a space shuttle and BESS by a balloon at the top of the atmosphere. In this study, we conduct an FCP search in space based on on-orbit data obtained using the DArk Matter Particle Explorer (DAMPE) satellite over a period of five years. Unlike underground experiments, which require an FCP energy of the order of hundreds of GeV, our FCP search starts at only a few GeV. An upper limit of $6.2\times 10^{-10}~~\mathrm{cm^{-2}sr^{-1} s^{-1}}$ is obtained for the flux. Our results demonstrate that DAMPE exhibits higher sensitivity than experiments of similar types by three orders of magnitude that more stringently restricts the conditions for the existence of FCP in primary cosmic rays.
△ Less
Submitted 9 September, 2022;
originally announced September 2022.
-
Construction and testing of sMDT tubes at the University of Michigan for the ATLAS Muon Spectrometer upgrade
Authors:
C. Wei,
A. Chen,
D. Amidei,
N. Anderson,
E. Carpenter,
L. Cooperrider,
T. Dai,
E. Diehl,
C. Ferretti,
J. Li,
P. Lugato,
J. Minnella,
S. Moskaitis,
K. Nelson,
V. Pillsbury,
E. Salzer,
L. Simpson,
Z. C. Wang,
Z. R. Wang,
C. Weaverdyck,
Z. Yang,
B. Zhou
Abstract:
This paper reports on the design and construction of infrastructure and test stations for small-diameter monitored drift tube (sMDT) assembly and testing at the University of Michigan (UM) to prepare for the ATLAS Muon Spectrometer upgrade for the high-luminosity program of the Large Hadron Collider. Procedures of the tube assembly and quality assurance and control (QA/QC) tests are described in d…
▽ More
This paper reports on the design and construction of infrastructure and test stations for small-diameter monitored drift tube (sMDT) assembly and testing at the University of Michigan (UM) to prepare for the ATLAS Muon Spectrometer upgrade for the high-luminosity program of the Large Hadron Collider. Procedures of the tube assembly and quality assurance and control (QA/QC) tests are described in detail. More than 99% of the tubes meet the tube QA/QC specifications based on 2100 tubes built at UM. The UM test stations are also used for QA/QC testing on the tubes constructed at Michigan State University. These tubes are being used to construct the sMDT chambers which will replace the current MDT chambers of the barrel inner station of the Muon Spectrometer.
△ Less
Submitted 8 September, 2022;
originally announced September 2022.
-
Design of a Time-to-Digital Converter ASIC and a mini-DAQ system for the Phase-2 Upgrade of the ATLAS Monitored Drift Tube detector
Authors:
Yuxiang Guo,
Jinhong Wang,
Yu Liang,
Xiong Xiao,
Xueye Hu,
Qi An,
J. W. Chapman,
Tiesheng Dai,
Lei Zhao,
Zhengguo Zhao,
Bing Zhou,
Junjie Zhu
Abstract:
We present the second prototype of a time-to-digital (TDC) ASIC for the upgrade of the ATLAS Monitored Drift Tube (MDT) detector for High-Luminosity LHC operations. Compared to the first prototype, triple modular redundancy has been implemented for the configuration and flow control logic. The total power consumption is increased by less than 10 mW while achieving the same time resolution and chan…
▽ More
We present the second prototype of a time-to-digital (TDC) ASIC for the upgrade of the ATLAS Monitored Drift Tube (MDT) detector for High-Luminosity LHC operations. Compared to the first prototype, triple modular redundancy has been implemented for the configuration and flow control logic. The total power consumption is increased by less than 10 mW while achieving the same time resolution and channel uniformity. A mini-DAQ system has been built to verify the front-end electronics chain with the new prototype together with other ASICs and boards in triggered mode. Cosmic ray tests with a small-diameter MDT chamber indicate that the configuration and data transmission of the readout electronics perform well. It is expected that this prototype design will be used in the final production.
△ Less
Submitted 23 November, 2020;
originally announced November 2020.
-
Response of the BGO Calorimeter to Cosmic Ray Nuclei in the DAMPE Experiment on Orbit
Authors:
H. T. Dai,
Y. L. Zhang,
J. J. Zang,
Z. Y. Zhang,
Y. F. Wei,
L. B. Wu,
C. M. Liu,
C. N. Luo,
D. Kyratzis,
A. De Benedittis,
C. Zhao,
Y. Wang,
P. C. Jiang,
Y. Z. Wang,
Y. Z. Zhao,
X. L. Wang,
Z. Z. Xu,
G. S. Huang
Abstract:
This paper is about a study on the response of the BGO calorimeter of DAMPE experiment. Four elements in Cosmic Ray nuclei are used as sources for this analysis. A feature resulting from the geomagnetic cutoff exhibits in the energy spectrum, both in simulated and reconstructed data, and is compared between them.
This paper is about a study on the response of the BGO calorimeter of DAMPE experiment. Four elements in Cosmic Ray nuclei are used as sources for this analysis. A feature resulting from the geomagnetic cutoff exhibits in the energy spectrum, both in simulated and reconstructed data, and is compared between them.
△ Less
Submitted 15 May, 2020;
originally announced May 2020.
-
Design and performance of a TDC ASIC for the upgrade of the ATLAS Monitored Drift Tube detector
Authors:
Yu Liang,
Jinhong Wang,
Xiong Xiao,
Alessandra Pipino,
Yuxiang Guo,
Qi An,
Andrea Baschirotto,
J. W. Chapman,
Tiesheng Dai,
Marcello de Matteis,
Markus Fras,
Oliver Kortner,
Hubert Kroha,
Federica Resta,
Robert Richter,
Lei Zhao,
Zhengguo Zhao,
Bing Zhou,
Junjie Zhu
Abstract:
We present the prototype of a time-to-digital (TDC) ASIC for the upgrade of the ATLAS Monitored Drift Tube (MDT) detector for high-luminosity LHC operation. This ASIC is based on a previously submitted demonstrator ASIC designed for timing performance evaluation, and includes all features necessary for the various operation modes, as well as the migration to the TSMC 130 nm CMOS technology. We pre…
▽ More
We present the prototype of a time-to-digital (TDC) ASIC for the upgrade of the ATLAS Monitored Drift Tube (MDT) detector for high-luminosity LHC operation. This ASIC is based on a previously submitted demonstrator ASIC designed for timing performance evaluation, and includes all features necessary for the various operation modes, as well as the migration to the TSMC 130 nm CMOS technology. We present the TDC design with the emphasis on added features and performance optimization. Tests of the timing performance demonstrate that this ASIC meets the design specifications. The TDC has a bin size of about 780 ps, and a timing bin variations within 40 ps for all 24 channels with leading and trailing edge digitization, while the power consumption has been limited to 250 mW, corresponding to a consumption of about 5.2 mW per edge measurement.
△ Less
Submitted 24 May, 2019; v1 submitted 16 March, 2019;
originally announced March 2019.
-
Development of a time-to-digital converter ASIC for the upgrade of the ATLAS Monitored Drift Tube detector
Authors:
Jinhong Wang,
Yu Liang,
Xiong Xiao,
Qi An,
John W. Chapman,
Tiesheng Dai,
Bing Zhou,
Junjie Zhu,
Lei Zhao
Abstract:
The upgrade of the ATLAS muon spectrometer for high-luminosity LHC requires new trigger and readout electronics for the various elements of the detector. We present the design of a time-to-digital converter (TDC) ASIC prototype for the ATLAS Monitored Drift Tube (MDT) detector. The chip was fabricated in a GlobalFoundries 130 nm CMOS technology. Studies indicate that its timing and power consumpti…
▽ More
The upgrade of the ATLAS muon spectrometer for high-luminosity LHC requires new trigger and readout electronics for the various elements of the detector. We present the design of a time-to-digital converter (TDC) ASIC prototype for the ATLAS Monitored Drift Tube (MDT) detector. The chip was fabricated in a GlobalFoundries 130 nm CMOS technology. Studies indicate that its timing and power consumption characteristics meet the design specifications, with a timing bin variation of 40 ps for all 48 channels with a power consumption of about 6.5 mW per channel.
△ Less
Submitted 11 August, 2017;
originally announced August 2017.
-
FPGA Implementation of a Fixed Latency Scheme in a Signal Packet Router for the Upgrade of ATLAS Forward Muon Trigger Electronics
Authors:
Jinhong Wang,
Xueye Hu,
Thomas Schwarz,
Junjie Zhu,
J. W. Chapman,
Tiesheng Dai,
Bing Zhou
Abstract:
We propose a new fixed latency scheme for Xilinx gigabit transceivers that will be used in the upgrade of the ATLAS forward muon spectrometer at the Large Hadron Collider. The fixed latency scheme is implemented in a 4.8 Gbps link between a frontend data serializer ASIC and a packet router. To achieve fixed latency, we use IO delay and dedicated carry in resources in a Xilinx FPGA, while minimally…
▽ More
We propose a new fixed latency scheme for Xilinx gigabit transceivers that will be used in the upgrade of the ATLAS forward muon spectrometer at the Large Hadron Collider. The fixed latency scheme is implemented in a 4.8 Gbps link between a frontend data serializer ASIC and a packet router. To achieve fixed latency, we use IO delay and dedicated carry in resources in a Xilinx FPGA, while minimally relying on the embedded features of the FPGA transceivers. The scheme is protocol independent and can be adapted to FPGA from other vendors with similar resources. This paper presents a detailed implementation of the fixed latency scheme, as well as simulations of the real environment in the ATLAS forward muon region.
△ Less
Submitted 20 September, 2015;
originally announced September 2015.
-
Characterization of a Serializer ASIC chip for the upgrade of the ATLAS muon detector
Authors:
Jinhong Wang,
Liang Guan,
Ziru Sang,
J. W. Chapman,
Tiesheng Dai,
Bing Zhou,
Junjie Zhu
Abstract:
We report on the design of a serializer ASIC to be used in the ATLAS forward muon detector for trigger data transmission. We discuss the performance of a prototype chip covering power dissipation, latency and stable operating line rate. Tests show that the serializer is capable of running at least at 5.76 Gbps with a bit error ratio below 1x10^{-15}, and a power consumption of 200 mW running at 4.…
▽ More
We report on the design of a serializer ASIC to be used in the ATLAS forward muon detector for trigger data transmission. We discuss the performance of a prototype chip covering power dissipation, latency and stable operating line rate. Tests show that the serializer is capable of running at least at 5.76 Gbps with a bit error ratio below 1x10^{-15}, and a power consumption of 200 mW running at 4.8 Gbps. The latency between the start of loading 30 bits into the serializer to the transmission of the first bit from the serializer is measured to be about 6 ns.
△ Less
Submitted 20 September, 2015;
originally announced September 2015.
-
Studies on fast triggering and high precision tracking with Resistive Plate Chambers
Authors:
G. Aielli,
B. Bilki,
R. Ball,
J. W. Chapman,
R. Cardarelli,
T. Dai,
E. Diehl,
J. Dubbert,
C. Ferretti,
H. Feng,
K. Francis,
L. Guan,
L. Han,
S. Hou,
D. Levin,
B. Li,
L. Liu,
L. Paolozzi,
J. Repond,
J. Roloff,
R. Santonico,
H. Y. Song,
X. L. Wang,
Y. Wu,
L. Xia
, et al. (5 additional authors not shown)
Abstract:
We report on studies of fast triggering and high-precision tracking using Resistive Plate Chambers (RPCs). Two beam tests were carried out with the 180 GeV muon beam at CERN using RPCs with gas gaps of 1.00 or 1.15 mm and equipped with readout strips with 1.27 mm pitch. This is the first beam test of RPCs with fine-pitch readout strips that explores simultaneously precision tracking and triggering…
▽ More
We report on studies of fast triggering and high-precision tracking using Resistive Plate Chambers (RPCs). Two beam tests were carried out with the 180 GeV muon beam at CERN using RPCs with gas gaps of 1.00 or 1.15 mm and equipped with readout strips with 1.27 mm pitch. This is the first beam test of RPCs with fine-pitch readout strips that explores simultaneously precision tracking and triggering capabilities. RPC signals were acquired with precision timing and charge integrating readout electronics at both ends of the strips. The time resolution was measured to be better than 600 ps and the average spatial resolution was found to be 220 um using charge information and 287 um using timing information. The dual-ended readout allows the determination of the average and the difference of the signal arrival times. The average time was found to be independent of the incident particle position along the strip and is useful for triggering purposes. The time difference yielded a determination of the hit position with a precision of 7.5 mm along the strip. These results demonstrate the feasibility using RPCs for fast and high-resolution triggering and tracking.
△ Less
Submitted 24 October, 2012;
originally announced October 2012.
-
Development of a plasma panel radiation detector: recent progress and key issues
Authors:
Yiftah Silver,
Robert Ball,
James R. Beene,
Yan Benhammou,
Meny Ben-Moshe,
J. W. Chapman,
Tiesheng Dai,
Erez Etzion,
Claudio Ferretti,
Nir Guttman,
Peter S. Friedman,
Daniel S. Levin,
S. Ritt,
Robert L. Varner,
Curtis Weaverdyck,
Bing Zhou
Abstract:
A radiation detector based on plasma display panel technology, which is the principal component of plasma television displays is presented. Plasma Panel Sensor (PPS) technology is a variant of micropattern gas radiation detectors. The PPS is conceived as an array of sealed plasma discharge gas cells which can be used for fast response (O(5ns) per pixel), high spatial resolution detection (pixel pi…
▽ More
A radiation detector based on plasma display panel technology, which is the principal component of plasma television displays is presented. Plasma Panel Sensor (PPS) technology is a variant of micropattern gas radiation detectors. The PPS is conceived as an array of sealed plasma discharge gas cells which can be used for fast response (O(5ns) per pixel), high spatial resolution detection (pixel pitch can be less than 100 micrometer) of ionizing and minimum ionizing particles. The PPS is assembled from non-reactive, intrinsically radiation-hard materials: glass substrates, metal electrodes and inert gas mixtures. We report on the PPS development program, including simulations and design and the first laboratory studies which demonstrate the usage of plasma display panels in measurements of cosmic ray muons, as well as the expansion of experimental results on the detection of betas from radioactive sources.
△ Less
Submitted 30 May, 2012;
originally announced May 2012.
-
Streamlined Calibrations of the ATLAS Precision Muon Chambers for Initial LHC Running
Authors:
N. Amram,
R. Ball,
Y. Benhammou,
M. Ben Moshe,
T. Dai,
E. B. Diehl,
J. Dubbert,
E. Etzion,
C. Ferretti,
J. Gregory,
S. Haider,
J. Hindes,
D. S. Levin,
R. Thun,
A. Wilson,
C. Weaverdyck,
Y. Wu,
H. Yang,
B. Zhou,
S. Zimmermann
Abstract:
The ATLAS Muon Spectrometer is designed to measure the momentum of muons with a resolution of dp/p = 3% and 10% at 100 GeV and 1 TeV momentum respectively. For this task, the spectrometer employs 355,000 Monitored Drift Tubes (MDTs) arrayed in 1200 Chambers. Calibration (RT) functions convert drift time measurements into tube-centered impact parameters for track segment reconstruction. RT function…
▽ More
The ATLAS Muon Spectrometer is designed to measure the momentum of muons with a resolution of dp/p = 3% and 10% at 100 GeV and 1 TeV momentum respectively. For this task, the spectrometer employs 355,000 Monitored Drift Tubes (MDTs) arrayed in 1200 Chambers. Calibration (RT) functions convert drift time measurements into tube-centered impact parameters for track segment reconstruction. RT functions depend on MDT environmental parameters and so must be appropriately calibrated for local chamber conditions. We report on the creation and application of a gas monitor system based calibration program for muon track reconstruction in the LHC startup phase.
△ Less
Submitted 7 March, 2011; v1 submitted 3 March, 2011;
originally announced March 2011.
-
Progress in the Development of Plasma Panel Radiation Detectors
Authors:
Robert Ball,
James R. Beene,
Yan Benhammou,
Meny Ben Moshe,
J. Wehrley Chapman,
Tiesheng Dai,
Erez Etzion,
Peter S. Friedman,
Daniel S. Levin,
Yiftah Silver,
Guy Sherman,
Robert L. Varner Jr.,
Curtis Weaverdyck,
Steve White,
J. Yu,
Bing Zhou
Abstract:
Plasma Display Panels (PDP), the underlying engine of panel plasma television displays, are being investigated for their utility as radiation detectors called Plasma Panel Sensors (PPS). The PPS a novel variant of a micropattern radiation detector, is intended to be a fast, high resolution detector comprised of an array of plasma discharge cells operating in a hermetically sealed gas mixture. We r…
▽ More
Plasma Display Panels (PDP), the underlying engine of panel plasma television displays, are being investigated for their utility as radiation detectors called Plasma Panel Sensors (PPS). The PPS a novel variant of a micropattern radiation detector, is intended to be a fast, high resolution detector comprised of an array of plasma discharge cells operating in a hermetically sealed gas mixture. We report on the PPS development effort, including recent laboratory measurements.
△ Less
Submitted 30 December, 2010;
originally announced January 2011.
-
A Multivariate Training Technique with Event Reweighting
Authors:
Hai-Jun Yang,
Tiesheng Dai,
Alan Wilson,
Zhengguo Zhao,
Bing Zhou
Abstract:
An event reweighting technique incorporated in multivariate training algorithm has been developed and tested using the Artificial Neural Networks (ANN) and Boosted Decision Trees (BDT). The event reweighting training are compared to that of the conventional equal event weighting based on the ANN and the BDT performance. The comparison is performed in the context of the physics analysis of the AT…
▽ More
An event reweighting technique incorporated in multivariate training algorithm has been developed and tested using the Artificial Neural Networks (ANN) and Boosted Decision Trees (BDT). The event reweighting training are compared to that of the conventional equal event weighting based on the ANN and the BDT performance. The comparison is performed in the context of the physics analysis of the ATLAS experiment at the Large Hadron Collider (LHC), which will explore the fundamental nature of matter and the basic forces that shape our universe. We demonstrate that the event reweighting technique provides an unbiased method of multivariate training for event pattern recognition.
△ Less
Submitted 19 February, 2008; v1 submitted 27 August, 2007;
originally announced August 2007.
